summaryrefslogtreecommitdiff
path: root/drivers/input/evdev.c
AgeCommit message (Collapse)AuthorFilesLines
2020-10-07Input: evdev - per-client waitgroupsKenny Levinsen1-10/+9
All evdev clients share a common waitgroup. On new input events, all clients waiting on this waitgroup are woken up, even those filtering out the events, possibly more than once per event. This leads to duplicated and unwanted wakeups. Split the shared waitgroup into per-client waitgroups for more fine-grained wakeups. Signed-off-by: Kenny Levinsen <kl@kl.wtf> Link: https://lore.kernel.org/r/20200429184126.2155-1-kl@kl.wtf Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-18Merge branch 'for-linus' into nextDmitry Torokhov1-15/+4
Merge for-linus branch to sync Elan touchscreen driver code.
2020-05-12Merge tag 'v5.6' into nextDmitry Torokhov1-11/+8
Sync up with mainline to get device tree and other changes.
2020-04-23Input: evdev - call input_flush_device() on release(), not flush()Brendan Shanks1-15/+4
input_flush_device() should only be called once the struct file is being released and no open descriptors remain, but evdev_flush() was calling it whenever a file descriptor was closed. This caused uploaded force-feedback effects to be erased when a process did a dup()/close() on the event FD, called system(), etc. Call input_flush_device() from evdev_release() instead. Reported-by: Mathieu Maret <mathieu.maret@gmail.com> Signed-off-by: Brendan Shanks <bshanks@codeweavers.com> Link: https://lore.kernel.org/r/20200421231003.7935-1-bshanks@codeweavers.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-19Input: evdev - use keyed wakeupsKenny Levinsen1-3/+4
Some processes, such as systemd, are only polling for EPOLLERR|EPOLLHUP. As evdev uses unkeyed wakeups, such a poll receives many spurious wakeups from uninteresting events. Use keyed wakeups to allow the wakeup target to more efficiently discard these uninteresting events. Signed-off-by: Kenny Levinsen <kl@kl.wtf> Link: https://lore.kernel.org/r/20200410233557.3892-1-kl@kl.wtf Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-01-11Input: evdev - convert kzalloc()/vzalloc() to kvzalloc()Miles Chen1-4/+1
We observed a large(order-3) allocation in evdev_open() and it may cause an OOM kernel panic in kzalloc(), before we getting to the vzalloc() fallback. Fix it by converting kzalloc()/vzalloc() to kvzalloc() to avoid the OOM killer logic as we have a vmalloc fallback. InputReader invoked oom-killer: gfp_mask=0x240c2c0 (GFP_KERNEL|__GFP_NOWARN|__GFP_COMP|__GFP_ZERO), nodemask=0, order=3, oom_score_adj=-900 ... (dump_backtrace) from (show_stack+0x18/0x1c) (show_stack) from (dump_stack+0x94/0xa8) (dump_stack) from (dump_header+0x7c/0xe4) (dump_header) from (out_of_memory+0x334/0x348) (out_of_memory) from (__alloc_pages_nodemask+0xe9c/0xeb8) (__alloc_pages_nodemask) from (kmalloc_order_trace+0x34/0x128) (kmalloc_order_trace) from (__kmalloc+0x258/0x36c) (__kmalloc) from (evdev_open+0x5c/0x17c) (evdev_open) from (chrdev_open+0x100/0x204) (chrdev_open) from (do_dentry_open+0x21c/0x354) (do_dentry_open) from (vfs_open+0x58/0x84) (vfs_open) from (path_openat+0x640/0xc98) (path_openat) from (do_filp_open+0x78/0x11c) (do_filp_open) from (do_sys_open+0x130/0x244) (do_sys_open) from (SyS_openat+0x14/0x18) (SyS_openat) from (__sys_trace_return+0x0/0x10) ... Normal: 12488*4kB (UMEH) 6984*8kB (UMEH) 2101*16kB (UMEH) 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 139440kB HighMem: 206*4kB (H) 131*8kB (H) 42*16kB (H) 2*32kB (H) 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2608kB ... Kernel panic - not syncing: Out of memory and no killable processes... Signed-off-by: Miles Chen <miles.chen@mediatek.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-12-14Input: input_event - fix struct padding on sparc64Arnd Bergmann1-7/+7
Going through all uses of timeval, I noticed that we screwed up input_event in the previous attempts to fix it: The time fields now match between kernel and user space, but all following fields are in the wrong place. Add the required padding that is implied by the glibc timeval definition to fix the layout, and use a struct initializer to avoid leaking kernel stack data. Fixes: 141e5dcaa735 ("Input: input_event - fix the CONFIG_SPARC64 mixup") Fixes: 2e746942ebac ("Input: input_event - provide override for sparc64") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20191213204936.3643476-2-arnd@arndb.de Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-25Input: allow drivers specify timestamp for input eventsAtif Niyaz1-27/+8
Currently, evdev stamps events with timestamps acquired in evdev_events() However, this timestamping may not be accurate in terms of measuring when the actual event happened. Let's allow individual drivers specify timestamp in order to provide a more accurate sense of time for the event. It is expected that drivers will set the timestamp in their hard interrupt routine. Signed-off-by: Atif Niyaz <atifniyaz@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14Merge branch 'for-linus' of ↵Linus Torvalds1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A few new drivers: - driver for Azoteq IQS550/572/525 touch controllers - driver for Microchip AT42QT1050 keys - driver for GPIO controllable vibrators - support for GT5663 in Goodix driver ... along with miscellaneous driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: libps2 - mark expected switch fall-through Input: qt1050 - add Microchip AT42QT1050 support Input: add support for Azoteq IQS550/572/525 Input: add a driver for GPIO controllable vibrators Input: synaptics-rmi4 - fix enum_fmt Input: synaptics-rmi4 - fill initial format HID: input: add mapping for KEY_KBD_LAYOUT_NEXT Input: add KEY_KBD_LAYOUT_NEXT Input: hyperv-keyboard - add module description Input: olpc_apsp - depend on ARCH_MMP Input: sun4i-a10-lradc-keys - add support for A83T Input: snvs_pwrkey - use dev_pm_set_wake_irq() to simplify code Input: lpc32xx-key - add clocks property and fix DT binding example Input: i8042 - signal wakeup from atkbd/psmouse Input: goodix - add GT5663 CTP support Input: goodix - add regulators suppot Input: evdev - use struct_size() in kzalloc() and vzalloc() Input: edt-ft5x06 - convert to use SPDX identifier Input: edt-ft5x06 - enable ACPI enumeration
2019-05-06*: convert stream-like files from nonseekable_open -> stream_openKirill Smelkov1-1/+1
Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock"), search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Among cases converted 14 were potentially vulnerable to read vs write deadlock (see details in 10dce8af3422): drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. and the rest were just safe to convert to stream_open because their read and write do not use ppos at all and corresponding file_operations do not have methods that assume @offset file access(*): arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. One can also recheck/review the patch via generating it with explanation comments included via $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain" (*) This second group also contains cases with read/write deadlocks that stream_open.cocci don't yet detect, but which are still valid to convert to stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c calls wait_for_completion_interruptible() in its .read, but stream_open.cocci currently detects only "wait_event*" as blocking. Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James R. Van Zandt" <jrv@vanzandt.mv.com> Cc: Corey Minyard <minyard@acm.org> Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> [scr24x_cs] Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Johan Hovold <johan@kernel.org> Cc: David Herrmann <dh.herrmann@googlemail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jean Delvare <jdelvare@suse.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [watchdog/* hwmon/*] Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> [drivers/pci/switch/switchtec] Acked-by: Bjorn Helgaas <bhelgaas@google.com> [drivers/pci/switch/switchtec] Cc: Benson Leung <bleung@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [platform/chrome] Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [rtc/*] Cc: Mark Brown <broonie@kernel.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Zwane Mwaikambo <zwanem@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
2019-04-04Input: evdev - use struct_size() in kzalloc() and vzalloc()Gustavo A. R. Silva1-4/+3
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); Notice that, in this case, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-05Input: evdev - add a schedule point in evdev_write()Dmitry Torokhov1-0/+1
Large writes to evdev interface may cause rcu stalls. Let's add cond_resched() to the loop to avoid this. Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-02Input: evdev - switch to bitmap APIAndy Shevchenko1-9/+7
Switch to bitmap API, i.e. bitmap_alloc(), bitmap_zalloc(), to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. While here, replace memcpy() with bitmap_copy() for sake of consistency. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-12vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-3/+3
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01Merge branch 'for-linus' of ↵Linus Torvalds1-7/+13
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer updates from Dmitry Torokhov: - evdev interface has been adjusted to extend the life of timestamps on 32 bit systems to the year of 2108 - Synaptics RMI4 driver's PS/2 guest handling ha beed updated to improve chances of detecting trackpoints on the pass-through port - mms114 touchcsreen controller driver has been updated to support generic device properties and work with mms152 cntrollers - Goodix driver now supports generic touchscreen properties - couple of drivers for AVR32 architecture are gone as the architecture support has been removed from the kernel - gpio-tilt driver has been removed as there are no mainline users and the driver itself is using legacy APIs and relies on platform data - MODULE_LINECSE/MODULE_VERSION cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: goodix - use generic touchscreen_properties Input: mms114 - fix typo in definition Input: mms114 - use BIT() macro instead of explicit shifting Input: mms114 - replace mdelay with msleep Input: mms114 - add support for mms152 Input: mms114 - drop platform data and use generic APIs Input: mms114 - mark as direct input device Input: mms114 - do not clobber interrupt trigger Input: edt-ft5x06 - fix error handling for factory mode on non-M06 Input: stmfts - set IRQ_NOAUTOEN to the irq flag Input: auo-pixcir-ts - delete an unnecessary return statement Input: auo-pixcir-ts - remove custom log for a failed memory allocation Input: da9052_tsi - remove unused mutex Input: docs - use PROPERTY_ENTRY_U32() directly Input: synaptics-rmi4 - log when we create a guest serio port Input: synaptics-rmi4 - unmask F03 interrupts when port is opened Input: synaptics-rmi4 - do not delete interrupt memory too early Input: ad7877 - use managed resource allocations Input: stmfts,s6sy671 - add SPDX identifier Input: remove atmel-wm97xx touchscreen driver ...
2018-01-10Input: extend usable life of event timestamps to 2106 on 32 bit systemsDeepa Dinamani1-7/+13
The input events use struct timeval to store event time, unfortunately this structure is not y2038 safe and is being replaced in kernel with y2038 safe structures. Because of ABI concerns we can not change the size or the layout of structure input_event, so we opt to re-interpreting the 'seconds' part of timestamp as an unsigned value, effectively doubling the range of values, to year 2106. Newer glibc that has support for 32 bit applications to use 64 bit time_t supplies __USE_TIME_BITS64 define [1], that we can use to present the userspace with updated input_event layout. The updated layout will cause the compile time breakage, alerting applications and distributions maintainers to the issue. Existing 32 binaries will continue working without any changes until 2038. Ultimately userspace applications should switch to using monotonic or boot time clocks, as realtime clock is not very well suited for input event timestamps as it can go backwards (see a80b83b7b8 "Input: evdev - add CLOCK_BOOTTIME support" by by John Stultz). With monotonic clock the practical range of reported times will always fit into the pair of 32 bit values, as we do not expect any system to stay up for a hundred years without a single reboot. [1] https://sourceware.org/glibc/wiki/Y2038ProofnessDesign Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Patchwork-Id: 10148083 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-21input: utilize new cdev_device_add helper functionLogan Gunthorpe1-9/+2
Replace the open coded registration of the cdev and dev with the new device_add_cdev() helper in evdev, joydev and mousedev. The helper replaces a common pattern by taking the proper reference against the parent device and adding both the cdev and the device. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-31Input: evdev - fix bug in checking duplicate clock change requestAniroop Mathur1-17/+19
clk_type and clkid stores different predefined clock identification values so they cannot be compared for checking duplicate clock change request. Therefore, lets fix it to avoid unexpected results. Signed-off-by: Aniroop Mathur <a.mathur@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-27Input: evdev - add event-mask APIDavid Herrmann1-2/+232
Hardware manufacturers group keys in the weirdest way possible. This may cause a power-key to be grouped together with normal keyboard keys and thus be reported on the same kernel interface. However, user-space is often only interested in specific sets of events. For instance, daemons dealing with system-reboot (like systemd-logind) listen for KEY_POWER, but are not interested in any main keyboard keys. Usually, power keys are reported via separate interfaces, however, some i8042 boards report it in the AT matrix. To avoid waking up those system daemons on each key-press, we had two ideas: - split off KEY_POWER into a separate interface unconditionally - allow filtering a specific set of events on evdev FDs Splitting of KEY_POWER is a rather weird way to deal with this and may break backwards-compatibility. It is also specific to KEY_POWER and might be required for other stuff, too. Moreover, we might end up with a huge set of input-devices just to have them properly split. Hence, this patchset implements the second idea: An event-mask to specify which events you're interested in. Two ioctls allow setting this mask for each event-type. If not set, all events are reported. The type==0 entry is used same as in EVIOCGBIT to set the actual EV_* mask of filtered events. This way, you have a two-level filter. We are heavily forward-compatible to new event-types and event-codes. So new user-space will be able to run on an old kernel which doesn't know the given event-codes or event-types. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-04Input: evdev - do not report errors form flush()Takashi Iwai1-9/+4
We've got bug reports showing the old systemd-logind (at least system-210) aborting unexpectedly, and this turned out to be because of an invalid error code from close() call to evdev devices. close() is supposed to return only either EINTR or EBADFD, while the device returned ENODEV. logind was overreacting to it and decided to kill itself when an unexpected error code was received. What a tragedy. The bad error code comes from flush fops, and actually evdev_flush() returns ENODEV when device is disconnected or client's access to it is revoked. But in these cases the fact that flush did not actually happen is not an error, but rather normal behavior. For non-disconnected devices result of flush is also not that interesting as there is no potential of data loss and even if it fails application has no way of handling the error. Because of that we are better off always returning success from evdev_flush(). Also returning EINTR from flush()/close() is discouraged (as it is not clear how application should handle this error), so let's stop taking evdev->mutex interruptibly. Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=939834 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-16Input: evdev - use kvfree() in evdev_release()Pekka Enberg1-4/+1
Use kvfree() instead of open-coding it. Signed-off-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-06Input: evdev - do not queue SYN_DROPPED if queue is emptyDmitry Torokhov1-11/+23
There is no point in queueing EV_SYN/SYN_DROPPED on clock type change when there are no events in the client's queue and doing so confuses tests in libinput package, so let's not do that. Reported-and-tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-01-15Merge tag 'v3.19-rc4' into nextDmitry Torokhov1-1/+1
Merge with mainline to bring in the latest thermal and other changes.
2015-01-15Input: evdev - flush pending events on clock type changeAnshul Garg1-23/+32
When client changes the type of clock used for the time stamps in input events flush pending events from the client's queue (since client would not know which events have old time stamps and which ones have new ones) and and queue SYN_DROPPED event. Signed-off-by: Anshul Garg <anshul.g@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-31Merge branch 'for-linus' of ↵Linus Torvalds1-16/+44
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Fixes for v7 protocol for ALPS devices and few other driver fixes. Also users can request input events to be stamped with boot time timestamps, in addition to real and monotonic timestamps" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: hil_kbd - fix incorrect use of init_completion Input: alps - v7: document the v7 touchpad packet protocol Input: alps - v7: fix finger counting for > 2 fingers on clickpads Input: alps - v7: sometimes a single touch is reported in mt[1] Input: alps - v7: ignore new packets Input: evdev - add CLOCK_BOOTTIME support Input: psmouse - expose drift duration for IBM trackpoints Input: stmpe - bias keypad columns properly Input: stmpe - enforce device tree only mode mfd: stmpe: add pull up/down register offsets for STMPE Input: optimize events_per_packet count calculation Input: edt-ft5x06 - fixed a macro coding style issue Input: gpio_keys - replace timer and workqueue with delayed workqueue Input: gpio_keys - allow separating gpio and irq in device tree
2014-12-18Input: evdev - add CLOCK_BOOTTIME supportAniroop Mathur1-16/+44
This patch adds support for CLOCK_BOOTTIME for input event timestamp. CLOCK_BOOTTIME includes suspend time, so it would allow aplications to get correct time difference between two events even when system resumes from suspend state. Signed-off-by: Aniroop Mathur <a.mathur@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-03drivers/input/evdev.c: don't kfree() a vmalloc addressAndrew Morton1-1/+1
If kzalloc() failed and then evdev_open_device() fails, evdev_open() will pass a vmalloc'ed pointer to kfree. This might fix https://bugzilla.kernel.org/show_bug.cgi?id=88401, where there was a crash in kfree(). Reported-by: Christian Casteyde <casteyde.christian@free.fr> Belatedly-Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Henrik Rydberg <rydberg@euromail.se> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-07Input: evdev - fix EVIOCG{type} ioctlDmitry Torokhov1-5/+8
The 'max' size passed into the function is measured in number of bits (KEY_MAX, LED_MAX, etc) so we need to convert it accordingly before trying to copy the data out, otherwise we will try copying too much and end up with up with a page fault. Reported-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23input: evdev: Use ktime_mono_to_real()Thomas Gleixner1-4/+3
Convert the monotonic timestamp with ktime_mono_to_real() in evdev_events(). In evdev_queue_syn_dropped() we can call either ktime_get() or ktime_get_real() depending on the clkid. No point in having two calls for CLOCK_REALTIME. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-05-15Merge tag 'v3.15-rc5' into nextDmitry Torokhov1-1/+3
Merge with Linux 3.15-rc5 to sync up Wacom and other changes.
2014-05-15Input: evdev - get rid of old workaround for EVIOCGBITDmitry Torokhov1-18/+0
We put this workaround in 2008 and the offending userspace has been fixed up long time ago; the link in the message is no longer valid either, so it is time to retire it. Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-29Input: don't modify the id of ioctl-provided ff effect on upload failureElias Vanderstuyft1-1/+3
If a new (id == -1) ff effect was uploaded from userspace, ff-core.c::input_ff_upload() will have assigned a positive number to the new effect id. Currently, evdev.c::evdev_do_ioctl() will save this new id to userspace, regardless of whether the upload succeeded or not. On upload failure, this can be confusing because the dev->ff->effects[] array will not contain an element at the index of that new effect id. This patch fixes this by leaving the id unchanged after upload fails. Note: Unfortunately applications should still expect changed effect id for quite some time. This has been discussed on: http://www.mail-archive.com/linux-input@vger.kernel.org/msg08513.html ("ff-core effect id handling in case of a failed effect upload") Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Elias Vanderstuyft <elias.vds@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-31Input: evdev - fall back to vmalloc for client event bufferDaniel Stone1-4/+12
evdev always tries to allocate the event buffer for clients using kzalloc rather than vmalloc, presumably to avoid mapping overhead where possible. However, drivers like bcm5974, which claims support for reporting 16 fingers simultaneously, can have an extraordinarily large buffer. The resultant contiguous order-4 allocation attempt fails due to fragmentation, and the device is thus unusable until reboot. Try kzalloc if we can to avoid the mapping overhead, but if that fails, fall back to vzalloc. Signed-off-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-09-07Input: evdev - add EVIOCREVOKE ioctlDavid Herrmann1-6/+31
If we have multiple sessions on a system, we normally don't want background sessions to read input events. Otherwise, it could capture passwords and more entered by the user on the foreground session. This is a real world problem as the recent XMir development showed: http://mjg59.dreamwidth.org/27327.html We currently rely on sessions to release input devices when being deactivated. This relies on trust across sessions. But that's not given on usual systems. We therefore need a way to control which processes have access to input devices. With VTs the kernel simply routed them through the active /dev/ttyX. This is not possible with evdev devices, though. Moreover, we want to avoid routing input-devices through some dispatcher-daemon in userspace (which would add some latency). This patch introduces EVIOCREVOKE. If called on an evdev fd, this revokes device-access irrecoverably for that *single* open-file. Hence, once you call EVIOCREVOKE on any dup()ed fd, all fds for that open-file will be rather useless now (but still valid compared to close()!). This allows us to pass fds directly to session-processes from a trusted source. The source keeps a dup()ed fd and revokes access once the session-process is no longer active. Compared to the EVIOCMUTE proposal, we can avoid the CAP_SYS_ADMIN restriction now as there is no way to revive the fd again. Hence, a user is free to call EVIOCREVOKE themself to kill the fd. Additionally, this ioctl allows multi-layer access-control (again compared to EVIOCMUTE which was limited to one layer via CAP_SYS_ADMIN). A middle layer can simply request a new open-file from the layer above and pass it to the layer below. Now each layer can call EVIOCREVOKE on the fds to revoke access for all layers below, at the expense of one fd per layer. There's already ongoing experimental user-space work which demonstrates how it can be used: http://lists.freedesktop.org/archives/systemd-devel/2013-August/012897.html Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-10Input: evdev - flush queues during EVIOCGKEY-like ioctlsDavid Herrmann1-4/+129
If userspace requests current KEY-state, they very likely assume that no such events are pending in the output queue of the evdev device. Otherwise, they will parse events which they already handled via EVIOCGKEY(). For XKB applications this can cause irreversible keyboard states if a modifier is locked multiple times because a CTRL-DOWN event is handled once via EVIOCGKEY() and once from the queue via read(), even though it should handle it only once. Therefore, lets do the only logical thing and flush the evdev queue atomically during this ioctl. We only flush events that are affected by the given ioctl. This only affects boolean events like KEY, SND, SW and LED. ABS, REL and others are not affected as duplicate events can be handled gracefully by user-space. Note: This actually breaks semantics of the evdev ABI. However, investigations showed that userspace already expects the new semantics and we end up fixing at least all XKB applications. All applications that are aware of this race-condition mirror the KEY state for each open-file and detect/drop duplicate events. Hence, they do not care whether duplicates are posted or not and work fine with this fix. Also note that we need proper locking to guarantee atomicity and avoid dead-locks. event_lock must be locked before queue_lock (see input-core). However, we can safely release event_lock while flushing the queue. This allows the input-core to proceed with pending events and only stop if it needs our queue_lock to post new events. This should guarantee that we don't block event-dispatching for too long while flushing a single event queue. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-22Input: fix use-after-free introduced with dynamic minor changesDmitry Torokhov1-2/+1
Commit 7f8d4cad1e4e ("Input: extend the number of event (and other) devices") made evdev, joydev and mousedev to embed struct cdev into their respective structures representing input devices. Unfortunately character device structure may outlive the parent structure unless we do not set it up as parent of character device so that it will stay pinned until character device is freed. Also, now that parent structure is pinned while character device exists we do not need to pin and unpin it every time user opens or closes it. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08Input: extend the number of event (and other) devicesDmitry Torokhov1-66/+33
Extend the amount of character devices, such as eventX, mouseX and jsX, from a hard limit of 32 per input handler to about 1024 shared across all handlers. To be compatible with legacy installations input handlers will start creating char devices with minors in their legacy range, however once legacy range is exhausted they will start allocating minors from the dynamic range 256-1024. Reviewed-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-09-19Input: evdev - Add the events() callbackHenrik Rydberg1-21/+47
By sending a full frame of events at the same time, the irqsoff latency at heavy load is brought down from 200 us to 100 us. Cc: Daniel Kurtz <djkurtz@chromium.org> Tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: Ping Cheng <pingc@wacom.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Input: Break out MT dataHenrik Rydberg1-4/+6
Move all MT-related things to a separate place. This saves some bytes for non-mt input devices, and prepares for new MT features. Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: Ping Cheng <pingc@wacom.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-05-02Input: evdev - properly handle read/write with count 0Dmitry Torokhov1-23/+38
According to the standard count 0 is special - no IO should happen but we can check error conditions (device gone away, etc), and return 0 if there are no errors. We used to return -EINVAL instead and we also could return 0 if an event was "stolen" by another thread. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02Input: evdev - properly access RCU-protected 'grab' dataDmitry Torokhov1-3/+5
We should use rcu_dereference_protected() when checking if given client is the one that grabbed the device. This fixes warnings produced by sparse. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-20Merge branch 'next' into for-linusDmitry Torokhov1-5/+47
2012-03-09Merge branch 'for-next' of github.com:rydberg/linux into nextDmitry Torokhov1-1/+26
2012-03-09Merge commit 'v3.3-rc6' into nextDmitry Torokhov1-1/+1
2012-02-24Input: evdev - fix variable initialisationHeiko Stübner1-1/+1
Commit 509f87c5f564 (evdev - do not block waiting for an event if fd is nonblock) created a code path were it was possible to use retval uninitialized. This could lead to the xorg evdev input driver getting corrupt data and refusing to work with log messages like AUO-Pixcir touchscreen: Read error: Success sg060_keys: Read error: Success AUO-Pixcir touchscreen: Read error: Success sg060_keys: Read error: Success (for drivers auo-pixcir-ts and gpio-keys). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Dima Zavin <dima@android.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-09Input: Add EVIOC mechanism for MT slotsHenrik Rydberg1-1/+26
This patch adds the ability to extract MT slot data via a new ioctl, EVIOCGMTSLOTS. The function returns an array of slot values for the specified ABS_MT event type. Example of user space usage: struct { unsigned code; int values[64]; } req; req.code = ABS_MT_POSITION_X; if (ioctl(fd, EVIOCGMTSLOTS(sizeof(req)), &req) < 0) return -1; for (i = 0; i < 64; i++) printf("slot %d: %d\n", i, req.values[i]); Reviewed-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-02-03Input: add infrastructure for selecting clockid for event time stampsJohn Stultz1-4/+21
As noted by Arve and others, since wall time can jump backwards, it is difficult to use for input because one cannot determine if one event occurred before another or for how long a key was pressed. However, the timestamp field is part of the kernel ABI, and cannot be changed without possibly breaking existing users. This patch adds a new IOCTL that allows a clockid to be set in the evdev_client struct that will specify which time base to use for event timestamps (ie: CLOCK_MONOTONIC instead of CLOCK_REALTIME). For now we only support CLOCK_MONOTONIC and CLOCK_REALTIME, but in the future we could support other clockids if appropriate. The default remains CLOCK_REALTIME, so we don't change the ABI. Signed-off-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-01Input: evdev - fix variable initialisationHeiko Stübner1-1/+1
Commit 509f87c5f564 (evdev - do not block waiting for an event if fd is nonblock) created a code path were it was possible to use retval uninitialized. This could lead to the xorg evdev input driver getting corrupt data and refusing to work with log messages like AUO-Pixcir touchscreen: Read error: Success sg060_keys: Read error: Success AUO-Pixcir touchscreen: Read error: Success sg060_keys: Read error: Success (for drivers auo-pixcir-ts and gpio-keys). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Dima Zavin <dima@android.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>