summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen
AgeCommit message (Collapse)AuthorFilesLines
2017-09-16Merge branch 'for-linus' of ↵Linus Torvalds4-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "A second round of updates for the input subsystem: - a new driver for PWM-controlled vibrators - ucb1400 touchscreen driver had completely busted suspend/resume handling - we now handle "home" button found on some devices with Goodix touchscreens - assorted other fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Gigabyte P57 to the keyboard reset table Input: xpad - validate USB endpoint type during probe Input: ucb1400_ts - fix suspend and resume handling Input: edt-ft5x06 - fix access to non-existing register Input: elantech - make arrays debounce_packet static, reduces object code size Input: surface3_spi - make const array header static, reduces object code size Input: goodix - add support for capacitive home button Input: add a driver for PWM controllable vibrators Input: adi - make array seq static, reduces object code size
2017-09-14dmi: Mark all struct dmi_system_id instances constChristoph Hellwig1-1/+1
... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-09-12Input: ucb1400_ts - fix suspend and resume handlingDmitry Torokhov1-2/+2
Instead of stopping the touchscreen we were starting it in suspend, and disabling it in resume. Fixes: c899afedf168 ("Input: ucb1400_ts - convert to threaded IRQ") Reported-by: Anton Volkov <avolkov@ispras.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-12Input: edt-ft5x06 - fix access to non-existing registerLuca Ceresoli1-1/+2
reg_addr->reg_report_rate is supposed to exist in M06, not M09. The driver is written to skip avoids access to non-existing registers when the register address is NO_REGISTER (0xff). But reg_addr->reg_report_rate is initialized to 0x00 by devm_kzalloc() (in edt_ft5x06_ts_probe()) and not changed thereafter. So the checks do not work and an access to register 0x00 is done. Fix by setting reg_addr->reg_report_rate to NO_REGISTER. Also fix the only place where reg_report_rate is checked against zero instead of NO_REGISTER. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-12Input: surface3_spi - make const array header static, reduces object code sizeColin Ian King1-1/+1
Don't populate the const array header on the stack, instead make it static. Makes the object code smaller by over 180 bytes: Before: text data bss dec hex filename 6003 1536 0 7539 1d73 surface3_spi.o After: text data bss dec hex filename 5726 1632 0 7358 1cbe surface3_spi.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-12Input: goodix - add support for capacitive home buttonSergei A. Trusov1-0/+9
On some x86 tablets with a Goodix touchscreen, the Windows logo on the front is a capacitive home button. Touching this button results in a touch with bit 4 of the first byte set, while only the lower 4 bits (0-3) are used to indicate the number of touches. Report a KEY_LEFTMETA press when this happens. Note that the hardware might support more than one button, in which case the "id" byte of coor_data would identify the button in question. This is not implemented as we don't have access to hardware with multiple buttons. Signed-off-by: Sergei A. Trusov <sergei.a.trusov@ya.ru> Acked-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-21Input: atmel_mxt_ts - add support for reset lineSebastian Reichel1-0/+22
Provide support for controlling reset pin. If this is not driven correctly the device will be held in reset and will not respond. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-21Input: atmel_mxt_ts - use more managed resourcesSebastian Reichel1-15/+9
Switch mxt_data and interrupt to resource managed allocation methods, which cleans up the driver slightly and prepares for adding reset GPIO support. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-19Input: wacom_w8001 - constify serio_device_idArvind Yadav1-1/+1
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-19Input: tsc40 - constify serio_device_idArvind Yadav1-1/+1
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-19Input: touchwin - constify serio_device_idArvind Yadav1-1/+1
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-19Input: touchright - constify serio_device_idArvind Yadav1-1/+1
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-19Input: touchit213 - constify serio_device_idArvind Yadav1-1/+1
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-19Input: penmount - constify serio_device_idArvind Yadav1-1/+1
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-19Input: mtouch - constify serio_device_idArvind Yadav1-1/+1
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-19Input: inexio - constify serio_device_idArvind Yadav1-1/+1
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-19Input: hampshire - constify serio_device_idArvind Yadav1-1/+1
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-19Input: gunze - constify serio_device_idArvind Yadav1-1/+1
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-19Input: fujitsu_ts - constify serio_device_idArvind Yadav1-1/+1
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-19Input: elo - constify serio_device_idArvind Yadav1-1/+1
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-19Input: dynapro - constify serio_device_idArvind Yadav1-1/+1
serio_device_id are not supposed to change at runtime. All functions working with serio_device_id provided by <linux/serio.h> work with const serio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-15Input: sun4i-ts - constify thermal_zone_of_device_ops structuresJulia Lawall1-1/+1
The thermal_zone_of_device_ops structure is only passed as the fourth argument to devm_thermal_zone_of_sensor_register, which is declared as const. Thus the thermal_zone_of_device_ops structure itself can be const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-15Input: mxs-lradc - make symbol mxs_lradc_ts_irq_names staticWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/input/touchscreen/mxs-lradc-ts.c:33:12: warning: symbol 'mxs_lradc_ts_irq_names' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> [dtor: changed to static const char * const] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-15Input: mxs-lradc - use correct error checkPan Bian1-2/+2
Function devm_ioremap() will return a NULL pointer on failure. However, in function mxs_lradc_ts_probe(), its return value is checked with IS_ERR(), which cannot detect the exceptional case. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-15Input: mxs-lradc - do a NULL check on ioresFabio Estevam1-0/+2
platform_get_resource() may fail, so we should better do a NULL check and return error on failure. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-07-25Merge branch 'bind_unbind' of ↵Dmitry Torokhov1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into next This brings in devm_device_add_group() and friends so that we can create driver-specific device attributes as managed resources.
2017-07-13Input: sur40 - skip all blobs that are not touchesFlorian Echtler1-9/+13
The SUR40 labels all reported blobs as touch, token, or generic blob. Previously, all blobs were reported as touch regardless of type, causing lots of false positives. Present patch fixes this. Signed-off-by: Martin Kaltenbrunner <modin@yuri.at> Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-07-13Input: sur40 - silence unnecessary noisy debug outputFlorian Echtler1-2/+5
This information is unneccessary, even as debug output. Leave commented out as documentation of the packet ID quirk. Signed-off-by: Martin Kaltenbrunner <modin@yuri.at> Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-07-13Input: sur40 - add additional reverse-engineered informationFlorian Echtler1-5/+12
Due to recent reverse engineering efforts, a lot more information is now available about the internals of the SUR40. We document this in the kernel driver for future use. Signed-off-by: Martin Kaltenbrunner <modin@yuri.at> Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-07-13Input: ads7846 - constify attribute_group structuresArvind Yadav1-2/+2
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 9086 624 0 9710 25ee drivers/input/touchscreen/ads7846.o File size After adding 'const': text data bss dec hex filename 9198 496 0 9694 25de drivers/input/touchscreen/ads7846.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-07-13Input: elants_i2c - constify attribute_group structuresArvind Yadav1-1/+1
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 9448 1008 0 10456 28d8 drivers/input/touchscreen/elants_i2c.o File size After adding 'const': text data bss dec hex filename 9496 944 0 10440 28c8 drivers/input/touchscreen/elants_i2c.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-07-13Input: raydium_i2c_ts - constify attribute_group structuresArvind Yadav1-1/+1
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 7801 560 0 8361 20a9 drivers/input/touchscreen/raydium_i2c_ts.o File size After adding 'const': text data bss dec hex filename 7849 496 0 8345 2099 drivers/input/touchscreen/raydium_i2c_ts.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-06-09Input: stmfts - mark all PM functions as __maybe_unusedArnd Bergmann1-2/+2
We get a harmless warning when CONFIG_RUNTIME_PM is disabled: drivers/input/touchscreen/stmfts.c:760:12: error: 'stmfts_runtime_resume' defined but not used [-Werror=unused-function] static int stmfts_runtime_resume(struct device *dev) drivers/input/touchscreen/stmfts.c:748:12: error: 'stmfts_runtime_suspend' defined but not used [-Werror=unused-function] static int stmfts_runtime_suspend(struct device *dev) The regular PM functions are already marked as __maybe_unused, so let's do the same for the runtime-PM as well. Fixes: 78bcac7b2ae1 ("Input: add support for the STMicroelectronics FingerTip touchscreen") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-06-06Input: add support for the STMicroelectronics FingerTip touchscreenAndi Shyti3-0/+834
The stmfts (ST-Microelectronics FingerTip S) touchscreen device is a capacitive multi-touch controller mainly for mobile use. It's connected through i2c bus at the address 0x49 and it interfaces with userspace through input event interface. At the current state it provides a touchscreen multitouch functionality up to 10 fingers. Each finger is enumerated with a distinctive id (from 0 to 9). If enabled the device can support single "touch" hovering, by providing three coordinates, x, y and distance. It is possible to select the touchkey functionality which provides a basic two keys interface for "home" and "back" menu, typical in mobile phones. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-06-03Input: s3c2410_ts - handle return value of clk_prepare_enableArvind Yadav1-1/+7
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-06-03Merge tag 'v4.12-rc3' into for-linusDmitry Torokhov4-2/+727
Merge with mainline to get acpi_dev_present() needed by patches to axp20x-pek driver.
2017-05-30Input: silead - disable interrupt during suspendHans de Goede1-0/+3
When we put the touchscreen controller in low-power mode the irq pin may trigger (float) and if we then try to read a data packet we get the following error in dmesg: [ 478.801017] silead_ts i2c-MSSL1680:00: Data read error -121 This commit disables the irq during suspend/resume fixing this error. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-30Merge tag 'v4.12-rc3' into nextDmitry Torokhov6-3/+729
Sync with mainline to bring in changes in platform drovers dropping calls to sparse_keymap_free() so that we can remove it for good.
2017-05-27Merge branch 'for-linus' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Just a few fixups to a couple of drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - ignore signals when finishing updating firmware Input: elan_i2c - clear INT before resetting controller Input: atmel_mxt_ts - add T100 as a readable object Input: edt-ft5x06 - increase allowed data range for threshold parameter
2017-05-23Input: tsc2007 - move header file out of I2C realmWolfram Sang1-1/+1
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-23Input: mms114 - move header file out of I2C realmWolfram Sang1-1/+1
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-23Input: mcs - move header file out of I2C realmWolfram Sang1-1/+1
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-23Input: atmel_mxt_ts - add T100 as a readable objectMaxime Roussin-Bélanger1-0/+1
When using the 'object' sysfs attribute, T100 is not displayed in the output. Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-23Input: edt-ft5x06 - increase allowed data range for threshold parameterMartin Kepplinger1-1/+1
The datasheet and application note does not mention an allowed range for the M09_REGISTER_THRESHOLD parameter. One of our customers needs to set lower values than 20 and they seem to work just fine on EDT EP0xx0M09 with T5x06 touch. So, lacking a known lower limit, we increase the range for thresholds, and set the lower limit to 0. The documentation is updated accordingly. Signed-off-by: Schoefegger Stefan <stefan.schoefegger@ginzinger.com> Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-11Merge tag 'hwparam-20170420' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull hw lockdown support from David Howells: "Annotation of module parameters that configure hardware resources including ioports, iomem addresses, irq lines and dma channels. This allows a future patch to prohibit the use of such module parameters to prevent that hardware from being abused to gain access to the running kernel image as part of locking the kernel down under UEFI secure boot conditions. Annotations are made by changing: module_param(n, t, p) module_param_named(n, v, t, p) module_param_array(n, t, m, p) to: module_param_hw(n, t, hwtype, p) module_param_hw_named(n, v, t, hwtype, p) module_param_hw_array(n, t, hwtype, m, p) where the module parameter refers to a hardware setting hwtype specifies the type of the resource being configured. This can be one of: ioport Module parameter configures an I/O port iomem Module parameter configures an I/O mem address ioport_or_iomem Module parameter could be either (runtime set) irq Module parameter configures an I/O port dma Module parameter configures a DMA channel dma_addr Module parameter configures a DMA buffer address other Module parameter configures some other value Note that the hwtype is compile checked, but not currently stored (the lockdown code probably won't require it). It is, however, there for future use. A bonus is that the hwtype can also be used for grepping. The intention is for the kernel to ignore or reject attempts to set annotated module parameters if lockdown is enabled. This applies to options passed on the boot command line, passed to insmod/modprobe or direct twiddling in /sys/module/ parameter files. The module initialisation then needs to handle the parameter not being set, by (1) giving an error, (2) probing for a value or (3) using a reasonable default. What I can't do is just reject a module out of hand because it may take a hardware setting in the module parameters. Some important modules, some ipmi stuff for instance, both probe for hardware and allow hardware to be manually specified; if the driver is aborts with any error, you don't get any ipmi hardware. Further, trying to do this entirely in the module initialisation code doesn't protect against sysfs twiddling. [!] Note that in and of itself, this series of patches should have no effect on the the size of the kernel or code execution - that is left to a patch in the next series to effect. It does mark annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in an already existing field" * tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits) Annotate hardware config module parameters in sound/pci/ Annotate hardware config module parameters in sound/oss/ Annotate hardware config module parameters in sound/isa/ Annotate hardware config module parameters in sound/drivers/ Annotate hardware config module parameters in fs/pstore/ Annotate hardware config module parameters in drivers/watchdog/ Annotate hardware config module parameters in drivers/video/ Annotate hardware config module parameters in drivers/tty/ Annotate hardware config module parameters in drivers/staging/vme/ Annotate hardware config module parameters in drivers/staging/speakup/ Annotate hardware config module parameters in drivers/staging/media/ Annotate hardware config module parameters in drivers/scsi/ Annotate hardware config module parameters in drivers/pcmcia/ Annotate hardware config module parameters in drivers/pci/hotplug/ Annotate hardware config module parameters in drivers/parport/ Annotate hardware config module parameters in drivers/net/wireless/ Annotate hardware config module parameters in drivers/net/wan/ Annotate hardware config module parameters in drivers/net/irda/ Annotate hardware config module parameters in drivers/net/hamradio/ Annotate hardware config module parameters in drivers/net/ethernet/ ...
2017-05-03Merge branch 'for-linus' of ↵Linus Torvalds19-510/+569
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: - a big update from Mauro converting input documentation to ReST format - Synaptics PS/2 is now aware of SMBus companion devices, which means that we can now use native RMI4 protocol to handle touchpads, instead of relying on legacy PS/2 mode. - we removed support from BMA180 accelerometer from input devices as it is now handled properly by IIO - update to TSC2007 to corretcly report pressure - other miscellaneous driver fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (152 commits) Input: ar1021_i2c - use BIT to check for a bit Input: twl4030-pwrbutton - use input_set_capability() helper Input: twl4030-pwrbutton - use correct device for irq request Input: ar1021_i2c - enable touch mode during open Input: add uinput documentation dt-bindings: input: add bindings document for ar1021_i2c driver dt-bindings: input: rotary-encoder: fix typo Input: xen-kbdfront - add module parameter for setting resolution ARM: pxa/raumfeld: fix compile error in rotary controller resources Input: xpad - do not suggest writing to Dominic Input: xpad - don't use literal blocks inside footnotes Input: xpad - note that usb/devices is now at /sys/kernel/debug/ Input: docs - freshen up introduction Input: docs - split input docs into kernel- and user-facing Input: docs - note that MT-A protocol is obsolete Input: docs - update joystick documentation a bit Input: docs - remove disclaimer/GPL notice Input: fix "Game console" heading level in joystick documentation Input: rotary-encoder - remove references to platform data from docs Input: move documentation for Amiga CD32 ...
2017-05-03Merge tag 'mfd-next-4.12' of ↵Linus Torvalds3-0/+725
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Freescale MXS Low Resolution ADC - Freescale i.MX23/i.MX28 LRADC touchscreen - Motorola CPCAP Power Button - TI LMU (Lighting Management Unit) - Atmel SMC (Static Memory Controller) New Device Support: - Add support for X-Powers AXP803 to axp20x - Add support for Dialog Semi DA9061 to da9062-core - Add support for Intel Cougar Mountain to lpc_ich - Add support for Intel Gemini Lake to lpc_ich New Functionality: - Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc - Add IRQ sense support; motorola-cpcap - Add ACPI support; cros_ec - Add Reset support; altera-a10sr - Add ADC support; axp20x - Add AC Power support; axp20x - Add Runtime PM support; atmel-ebi, exynos-lpass - Add Battery Power Supply support; axp20x - Add Clock support; exynos-lpass, hi655x-pmic Fix-ups: - Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc - Add .remove() method; stm32-timers, exynos-lpass - Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus - Rename variables for clarity; axp20x - Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power - Improve formatting; arizona-core, axp20x - Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb - Simplify/refactor code; arizona-core, atmel-ebi - Improve error checking; intel_soc_pmic_core Bug Fixes: - Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power - Correct max-register value; stm32-timers - Extend timeout to account for clock stretching; cros_ec_spi - Use correct IRQ trigger type; motorola-cpcap - Fix bad use of IRQ sense register; motorola-cpcap - Logic error "||" should be "&&"; mxs-lradc-ts" * tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits) input: touchscreen: mxs-lradc: || vs && typos dt-bindings: Add AXP803's regulator info mfd: axp20x: Support AXP803 variant dt-bindings: Add device tree binding for X-Powers AXP803 PMIC dt-bindings: Make AXP20X compatible strings one per line mfd: intel_soc_pmic_core: Fix unchecked return value mfd: menelaus: Remove obsolete local_irq_disable() and local_irq_enable() mfd: omap-usb-tll: Configure ULPIAUTOIDLE mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode mfd: palmas: Fixed spelling mistake in error message mfd: lpc_ich: Add support for Intel Gemini Lake SoC mfd: hi655x: Add the clock cell to provide WiFi and Bluetooth mfd: intel_soc_pmic: Fix a mess with compilation units mfd: exynos-lpass: Add runtime PM support mfd: exynos-lpass: Add missing remove() function mfd: exynos-lpass: Add support for clocks mfd: exynos-lpass: Remove pad retention control iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs mfd: cpcap: Fix bad use of IRQ sense register mfd: cpcap: Use ack_invert interrupts ...
2017-05-01Input: ar1021_i2c - use BIT to check for a bitMartin Kepplinger1-1/+2
The MSB for the first byte of touch data transmission is always 1. Make it a little more obvious we're testing this bit by using BIT(7). Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-01Input: ar1021_i2c - enable touch mode during openMartin Kepplinger1-0/+15
The device could as well be in command mode, in which this driver cannot handle the device. When opening the device, let's make sure the device will be in the mode we expect it to be for this driver. Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-27input: touchscreen: mxs-lradc: || vs && typosDan Carpenter1-3/+3
These tests are meaningless as is because "adapt" can't possibly be both less than 1 and greater than 32. Fixes: d81ca730e3e4 ("input: touchscreen: mxs-lradc: Add support for touchscreen") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>