Age | Commit message (Collapse) | Author | Files | Lines |
|
The struct definition macros are hard to read and compare, expand them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-7-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The struct definition macros are hard to read and compare, expand them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-6-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The struct definition macros are hard to read and compare, expand them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-5-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The struct definition macros are hard to read and compare, expand them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-4-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The struct definition macros are hard to read and compare, expand them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-3-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The struct definition macros are hard to read and compare, expand them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-2-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The struct definition macros are hard to read and compare, expand them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-1-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
As pointed out by Bjorn and Mike in [1], we can simplify the handling
of enable_mask-based BCMs. This series attempts to do so and fixes a bug
that snuck in.
Gave a quick spin on 8450, doesn't seem to have exploded.
[1] https://lore.kernel.org/linux-arm-msm/113b50f8-35f6-73fc-4fc9-302262927c5e@quicinc.com/
Link: https://lore.kernel.org/r/20230811-topic-icc_fix_1he-v2-0-0620af8ac133@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
BCMs with an enable_mask expect to only have that specific value written
to them. The current implementation only works by miracle for BCMs with
enable mask == BIT(0), as the minimal vote we've been using so far just
so happens to be equal to that.
Use the correct value with keepalive voting.
Fixes: d8630f050d3f ("interconnect: qcom: Add support for mask-based BCMs")
Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-icc_fix_1he-v2-2-0620af8ac133@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
We don't need all the complex arithmetic for BCMs utilizing enable_mask,
as all we need to do is to determine whether there's any user (or
keepalive) asking for it to be on.
Separate the logic for such BCMs for a small speed boost.
Suggested-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-icc_fix_1he-v2-1-0620af8ac133@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Teach lockdep that icc_bw_lock is needed in code paths that could
deadlock if they trigger reclaim.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20230807171148.210181-8-robdclark@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
For cases where icc_bw_set() can be called in callbaths that could
deadlock against shrinker/reclaim, such as runpm resume, we need to
decouple the icc locking. Introduce a new icc_bw_lock for cases where
we need to serialize bw aggregation and update to decouple that from
paths that require memory allocation such as node/link creation/
destruction.
Fixes this lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
6.2.0-rc8-debug+ #554 Not tainted
------------------------------------------------------
ring0/132 is trying to acquire lock:
ffffff80871916d0 (&gmu->lock){+.+.}-{3:3}, at: a6xx_pm_resume+0xf0/0x234
but task is already holding lock:
ffffffdb5aee57e8 (dma_fence_map){++++}-{0:0}, at: msm_job_run+0x68/0x150
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (dma_fence_map){++++}-{0:0}:
__dma_fence_might_wait+0x74/0xc0
dma_resv_lockdep+0x1f4/0x2f4
do_one_initcall+0x104/0x2bc
kernel_init_freeable+0x344/0x34c
kernel_init+0x30/0x134
ret_from_fork+0x10/0x20
-> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}:
fs_reclaim_acquire+0x80/0xa8
slab_pre_alloc_hook.constprop.0+0x40/0x25c
__kmem_cache_alloc_node+0x60/0x1cc
__kmalloc+0xd8/0x100
topology_parse_cpu_capacity+0x8c/0x178
get_cpu_for_node+0x88/0xc4
parse_cluster+0x1b0/0x28c
parse_cluster+0x8c/0x28c
init_cpu_topology+0x168/0x188
smp_prepare_cpus+0x24/0xf8
kernel_init_freeable+0x18c/0x34c
kernel_init+0x30/0x134
ret_from_fork+0x10/0x20
-> #2 (fs_reclaim){+.+.}-{0:0}:
__fs_reclaim_acquire+0x3c/0x48
fs_reclaim_acquire+0x54/0xa8
slab_pre_alloc_hook.constprop.0+0x40/0x25c
__kmem_cache_alloc_node+0x60/0x1cc
__kmalloc+0xd8/0x100
kzalloc.constprop.0+0x14/0x20
icc_node_create_nolock+0x4c/0xc4
icc_node_create+0x38/0x58
qcom_icc_rpmh_probe+0x1b8/0x248
platform_probe+0x70/0xc4
really_probe+0x158/0x290
__driver_probe_device+0xc8/0xe0
driver_probe_device+0x44/0x100
__driver_attach+0xf8/0x108
bus_for_each_dev+0x78/0xc4
driver_attach+0x2c/0x38
bus_add_driver+0xd0/0x1d8
driver_register+0xbc/0xf8
__platform_driver_register+0x30/0x3c
qnoc_driver_init+0x24/0x30
do_one_initcall+0x104/0x2bc
kernel_init_freeable+0x344/0x34c
kernel_init+0x30/0x134
ret_from_fork+0x10/0x20
-> #1 (icc_lock){+.+.}-{3:3}:
__mutex_lock+0xcc/0x3c8
mutex_lock_nested+0x30/0x44
icc_set_bw+0x88/0x2b4
_set_opp_bw+0x8c/0xd8
_set_opp+0x19c/0x300
dev_pm_opp_set_opp+0x84/0x94
a6xx_gmu_resume+0x18c/0x804
a6xx_pm_resume+0xf8/0x234
adreno_runtime_resume+0x2c/0x38
pm_generic_runtime_resume+0x30/0x44
__rpm_callback+0x15c/0x174
rpm_callback+0x78/0x7c
rpm_resume+0x318/0x524
__pm_runtime_resume+0x78/0xbc
adreno_load_gpu+0xc4/0x17c
msm_open+0x50/0x120
drm_file_alloc+0x17c/0x228
drm_open_helper+0x74/0x118
drm_open+0xa0/0x144
drm_stub_open+0xd4/0xe4
chrdev_open+0x1b8/0x1e4
do_dentry_open+0x2f8/0x38c
vfs_open+0x34/0x40
path_openat+0x64c/0x7b4
do_filp_open+0x54/0xc4
do_sys_openat2+0x9c/0x100
do_sys_open+0x50/0x7c
__arm64_sys_openat+0x28/0x34
invoke_syscall+0x8c/0x128
el0_svc_common.constprop.0+0xa0/0x11c
do_el0_svc+0xac/0xbc
el0_svc+0x48/0xa0
el0t_64_sync_handler+0xac/0x13c
el0t_64_sync+0x190/0x194
-> #0 (&gmu->lock){+.+.}-{3:3}:
__lock_acquire+0xe00/0x1060
lock_acquire+0x1e0/0x2f8
__mutex_lock+0xcc/0x3c8
mutex_lock_nested+0x30/0x44
a6xx_pm_resume+0xf0/0x234
adreno_runtime_resume+0x2c/0x38
pm_generic_runtime_resume+0x30/0x44
__rpm_callback+0x15c/0x174
rpm_callback+0x78/0x7c
rpm_resume+0x318/0x524
__pm_runtime_resume+0x78/0xbc
pm_runtime_get_sync.isra.0+0x14/0x20
msm_gpu_submit+0x58/0x178
msm_job_run+0x78/0x150
drm_sched_main+0x290/0x370
kthread+0xf0/0x100
ret_from_fork+0x10/0x20
other info that might help us debug this:
Chain exists of:
&gmu->lock --> mmu_notifier_invalidate_range_start --> dma_fence_map
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(dma_fence_map);
lock(mmu_notifier_invalidate_range_start);
lock(dma_fence_map);
lock(&gmu->lock);
*** DEADLOCK ***
2 locks held by ring0/132:
#0: ffffff8087191170 (&gpu->lock){+.+.}-{3:3}, at: msm_job_run+0x64/0x150
#1: ffffffdb5aee57e8 (dma_fence_map){++++}-{0:0}, at: msm_job_run+0x68/0x150
stack backtrace:
CPU: 7 PID: 132 Comm: ring0 Not tainted 6.2.0-rc8-debug+ #554
Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
Call trace:
dump_backtrace.part.0+0xb4/0xf8
show_stack+0x20/0x38
dump_stack_lvl+0x9c/0xd0
dump_stack+0x18/0x34
print_circular_bug+0x1b4/0x1f0
check_noncircular+0x78/0xac
__lock_acquire+0xe00/0x1060
lock_acquire+0x1e0/0x2f8
__mutex_lock+0xcc/0x3c8
mutex_lock_nested+0x30/0x44
a6xx_pm_resume+0xf0/0x234
adreno_runtime_resume+0x2c/0x38
pm_generic_runtime_resume+0x30/0x44
__rpm_callback+0x15c/0x174
rpm_callback+0x78/0x7c
rpm_resume+0x318/0x524
__pm_runtime_resume+0x78/0xbc
pm_runtime_get_sync.isra.0+0x14/0x20
msm_gpu_submit+0x58/0x178
msm_job_run+0x78/0x150
drm_sched_main+0x290/0x370
kthread+0xf0/0x100
ret_from_fork+0x10/0x20
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20230807171148.210181-7-robdclark@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Enable sync_state on sm8450 so that the interconnect votes actually mean
anything and aren't just pinned to INT_MAX.
Fixes: fafc114a468e ("interconnect: qcom: Add SM8450 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230811-topic-8450_syncstate-v1-1-69ae5552a18b@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct icc_onecell_data.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Georgi Djakov <djakov@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230817204215.never.916-kees@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct icc_path.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Georgi Djakov <djakov@kernel.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230817204144.never.605-kees@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct icc_clk_provider.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Georgi Djakov <djakov@kernel.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230817202914.never.661-kees@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
This series contains fixes necessary for icc to behave correctly
on QCM2290.
* icc-qcm2290
interconnect: qcom: qcm2290: Enable keep_alive on all buses
interconnect: qcom: qcm2290: Enable sync state
Link: https://lore.kernel.org/r/20230720-topic-qcm2290_icc-v2-0-a2ceb9d3e713@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The fixes that got merged into v6.5-rc6 are needed here.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Enable the generic .sync_state callback to ensure there are no
outstanding votes that would waste power.
Generally one would need a bunch of interface clocks to access the QoS
registers when trying to go over all possible nodes during sync_state,
but QCM2290 surprisingly does not seem to require any such handling.
Fixes: 1a14b1ac3935 ("interconnect: qcom: Add QCM2290 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230720-topic-qcm2290_icc-v2-2-a2ceb9d3e713@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
QCM2290 expects all buses to be up at all times when the CPU is
active. Enable keep_alive on all of them to achieve that.
Fixes: 1a14b1ac3935 ("interconnect: qcom: Add QCM2290 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230720-topic-qcm2290_icc-v2-1-a2ceb9d3e713@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
SM8250 (like SM8150 but unlike all other QUP-equipped SoCs) doesn't
provide a qup-core path. Adjust the bindings and drivers as necessary,
and then describe the icc paths in the device tree. This makes it possible
for interconnect sync_state succeed so long as you don't use UFS.
* icc-sm8250-qup
dt-bindings: interconnect: qcom,rpmh: Add SM8250 QUP virt
dt-bindings: interconnect: qcom,sm8250: Add QUP virt
interconnect: qcom: sm8250: Fix QUP0 nodes
Link: https://lore.kernel.org/r/20230703-topic-8250_qup_icc-v2-0-9ba0a9460be2@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The QUP0 BCM relates to some internal property of the QUPs, and should
be configured independently of the path to the QUP. In line with other
platforms expose QUP_CORE endpoints in order allow this configuration.
Fixes: 6df5b349491e ("interconnect: qcom: Add SM8250 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230703-topic-8250_qup_icc-v2-3-9ba0a9460be2@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Fix the following smatch error:
drivers/interconnect/qcom/icc-rpm.c:243 qcom_icc_rpm_set() error: uninitialized symbol 'ret'.
Fixes: 32846c4a8f2a ("interconnect: qcom: icc-rpm: Set bandwidth on both contexts")
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230717125534.2455745-1-djakov@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174638.4058268-1-robh@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Up until now, we've been aggregating the bandwidth values and only
dividing them by the bus width of the source node. This was completely
wrong, as different nodes on a given path may (and usually do) have
varying bus widths. That in turn, resulted in the calculated clock rates
being completely bogus - usually they ended up being much higher, as
NoC_A<->NoC_B links are very wide.
Since we're not using the aggregate bandwidth value for anything other
than clock rate calculations, remodel qcom_icc_bus_aggregate() to
calculate the per-context clock rate for a given provider, taking into
account the bus width of every individual node.
Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-22-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Currently, we're setting the aggregated-on-provider bandwidth on each
node, individually. That is of course incorrect and results in far too
high votes. Use the correct values to ensure we're not wasting power.
Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-21-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Up until now, for some reason we've only been setting bandwidth values
on the active-only context. That pretty much meant that RPM could lift
all votes when entering sleep mode. Or never sleep at all.
That in turn could potentially break things like USB wakeup, as the
connection between APSS and SNoC/PNoC would simply be dead.
Set the values appropriately.
Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-20-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SMD RPM only provides two buckets, one each for the active-only and
active-sleep RPM contexts. Use the correct constant to allocate and
operate on them.
This will make the qcom,icc.h header no longer work with this driver,
mostly because.. it was never meant to! The commit that introduced
bucket support to SMD RPM was trying to shove a square into a round
hole and it did not work out very well. That said, there are no
active users of SMD RPM ICC + qcom,icc.h, so that doesn't hurt.
Fixes: dcbce7b0a79c ("interconnect: qcom: icc-rpm: Support multiple buckets")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-19-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The sole purpose of bus clocks that were previously registered with
rpmcc was to convey the aggregated bandwidth to RPM. There's no good
reason to keep them outside the interconnect framework, as it only
adds to the plentiful complexity.
Add the required code to handle these clocks from within SMD RPM ICC.
RPM-owned bus clocks are no longer considered a thing, but sadly we
have to allow for the existence of HLOS-owned bus clocks, as some
(mostly older) SoCs (ab)use these for bus scaling (e.g. MSM8998 and
&mmcc AHB_CLK_SRC).
This in turn is trivially solved with a single *clk, which is filled
and used iff qp.bus_clk_desc is absent and we have a "bus" clock-names
entry in the DT node.
This change should(tm) be fully compatible with all sorts of old
Device Trees as far as the interconnect functionality goes (modulo
abusing bus clock handles or wrongly using the qcom,icc.h binding,
but that's a mistake in and of itself).
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-17-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Assign the necessary definitions to migrate to the new bus clock
handling mechanism.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-16-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Assign the necessary definitions to migrate to the new bus clock
handling mechanism.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-15-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Assign the necessary definitions to migrate to the new bus clock
handling mechanism.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-14-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Assign the necessary definitions to migrate to the new bus clock
handling mechanism.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-13-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Assign the necessary definitions to migrate to the new bus clock
handling mechanism.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-12-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Assign the necessary definitions to migrate to the new bus clock
handling mechanism.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-11-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the definitions for RPM bus clocks that will be used by many
different platforms.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-10-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Introduce qcom_icc_rpm_set_bus_rate() in preparation for handling RPM
clock resources within the interconnect framework. This lets us greatly
simplify all of the code handling, as setting the rate comes down to:
u32 rate_khz = max(clk.sleep_rate, clk.active_rate, clk_a.active_rate)
write_to_rpm(clock.description, rate_khz);
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-9-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
smd-rpm.h is not very useful as-is and both files are always included
anyway.. Combine them.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-8-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Currently the header does not provide all the required dependencies.
Fix it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-7-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The downstream kernel employs the concept of "keeping the bus alive"
by voting for the minimum (XO/19.2MHz) rate at all times on certain
(well, most) buses. This is a very important thing to have, as if we
either have a lackluster/wrong DT that doesn't specify a (high enough)
vote on a certain bus, we may lose access to the entire bus altogether.
This is very apparent when we only start introducing interconnect
support on a given platform and haven't yet introduced voting on all
peripherals.
The same can happen if we only have a single driver casting a vote on
a certain bus and that driver exits/crashes/suspends.
The keepalive vote is limited to the ACTIVE bucket, as keeping a
permanent vote on the SLEEP one could prevent the platform from properly
entering low power mode states.
Introduce the very same concept, with a slight twist: the vendor
kernel checks whether the rate is zero before setting the minimum
vote, but that's rather silly, as in doing so we're at the mercy
of CCF. Instead, explicitly clamp the rates to always be >= 19.2 MHz
for providers with keep_alive=true.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-6-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Set the proper enable_mask the ACV node requiring such value
to be used instead of a bandwidth when voting.
The masks was copied from the downstream implementation at [1].
[1] https://git.codelinaro.org/clo/la/kernel/msm-5.15/-/blob/kernel.lnx.5.15.r32-rel/drivers/interconnect/qcom/lemans.c
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230619-topic-sm8550-upstream-interconnect-mask-vote-v2-4-709474b151cc@linaro.org
Fixes: 3655a63f9661 ("interconnect: qcom: add a driver for sa8775p")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Set the proper enable_mask to nodes requiring such value
to be used instead of a bandwidth when voting.
The masks were copied from the downstream implementation at [1].
[1] https://git.codelinaro.org/clo/la/kernel/msm-5.15/-/blob/kernel.lnx.5.15.r1-rel/drivers/interconnect/qcom/kalama.c
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230619-topic-sm8550-upstream-interconnect-mask-vote-v2-3-709474b151cc@linaro.org
Fixes: e6f0d6a30f73 ("interconnect: qcom: Add SM8550 interconnect provider driver")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Set the proper enable_mask to nodes requiring such value
to be used instead of a bandwidth when voting.
The masks were copied from the downstream implementation at [1].
[1] https://git.codelinaro.org/clo/la/kernel/msm-5.10/-/blob/KERNEL.PLATFORM.1.0.r2-05600-WAIPIOLE.0/drivers/interconnect/qcom/waipio.c
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230619-topic-sm8550-upstream-interconnect-mask-vote-v2-2-709474b151cc@linaro.org
Fixes: fafc114a468e ("interconnect: qcom: Add SM8450 interconnect provider driver")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Some BCMs aren't directly associated with the data path (i.e. ACV) and
therefore don't communicate using BW. Instead, they are simply
enabled/disabled with a simple bit mask. Add support for these.
Origin commit retrieved from:
https://git.codelinaro.org/clo/la/kernel/msm-5.15/-/commit/2d1573e0206998151b342e6b52a4c0f7234d7e36
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
[narmstrong: removed copyright change from original commit]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230619-topic-sm8550-upstream-interconnect-mask-vote-v2-1-709474b151cc@linaro.org
Fixes: fafc114a468e ("interconnect: qcom: Add SM8450 interconnect provider driver")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
* icc-qos
interconnect: qcom: rpm: Rename icc desc clocks to bus_blocks
interconnect: qcom: rpm: Rename icc provider num_clocks to num_bus_clocks
interconnect: qcom: rpm: Drop unused parameters
interconnect: qcom: rpm: Set QoS registers only once
interconnect: qcom: rpm: Handle interface clocks
interconnect: qcom: icc-rpm: Enforce 2 or 0 bus clocks
interconnect: qcom: rpm: Don't use clk_get_optional for bus clocks anymore
interconnect: qcom: msm8996: Promote to core_initcall
interconnect: qcom: rpm: allocate enough data in probe()
Link: https://lore.kernel.org/r/20230228-topic-qos-v8-0-ee696a2c15a9@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
On MSM8996 two CPU clusters are interconnected using the Core Bus
Fabric (CBF). In order for the CPU clusters to function properly, it
should be clocked following the core's frequencies to provide adequate
bandwidth.
Register CBF as a clock (required for CPU to boot) and add a tiny
interconnect layer on top of it to let cpufreq/opp scale the CBF clock.
* icc-cbf
dt-bindings: interconnect/msm8996-cbf: add defines to be used by CBF
interconnect: add clk-based icc provider support
clk: qcom: cbf-msm8996: scale CBF clock according to the CPUfreq
interconnect: icc-clk: fix modular build
Link: https://lore.kernel.org/r/20230512001334.2983048-1-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Fix building interconnect-clk as a module:
- Add EXPORT_SYMBOL_GPL to the exported functions
- Add MODULE_DESCRIPTION/_LICENSE/_AUTHOR
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230519230122.3958816-1-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The icc_get() interface can be used to lookup an interconnect path based
on global node ids. There has never been any users of this interface and
all lookups are currently done from the devicetree.
Remove the unused icc_get() interface.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230523095248.25211-1-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
This was not allocating enough bytes. There are two issue here.
First, there was a typo where it was taking the size of the pointer
instead of the size of the struct, "sizeof(qp->intf_clks)" vs
"sizeof(*qp->intf_clks)". Second, it's an array of "cd_num" clocks so
we need to allocate space for more than one element.
Fixes: 2e2113c8a64f ("interconnect: qcom: rpm: Handle interface clocks")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/e0fa275c-ae63-4342-9c9e-0ffaf6314da1@kili.mountain
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The interconnect driver is (or soon will be) vital to many other
devices, as it's not a given that the bootloader will set up enough
bandwidth for us or that the values we come into are reasonable.
Promote the driver to core_initcall to ensure the consumers (i.e.
most "meaningful" parts of the SoC) can probe without deferrals.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v8-8-ee696a2c15a9@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|