summaryrefslogtreecommitdiff
path: root/drivers/iommu/intel
AgeCommit message (Collapse)AuthorFilesLines
2020-10-20Merge tag 'iommu-fix-v5.10' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fix from Joerg Roedel: "Fix a build regression with !CONFIG_IOMMU_API" * tag 'iommu-fix-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Don't dereference iommu_device if IOMMU_API is not built
2020-10-19iommu/vt-d: Don't dereference iommu_device if IOMMU_API is not builtBartosz Golaszewski1-1/+1
Since commit c40aaaac1018 ("iommu/vt-d: Gracefully handle DMAR units with no supported address widths") dmar.c needs struct iommu_device to be selected. We can drop this dependency by not dereferencing struct iommu_device if IOMMU_API is not selected and by reusing the information stored in iommu->drhd->ignored instead. This fixes the following build error when IOMMU_API is not selected: drivers/iommu/intel/dmar.c: In function ‘free_iommu’: drivers/iommu/intel/dmar.c:1139:41: error: ‘struct iommu_device’ has no member named ‘ops’ 1139 | if (intel_iommu_enabled && iommu->iommu.ops) { ^ Fixes: c40aaaac1018 ("iommu/vt-d: Gracefully handle DMAR units with no supported address widths") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Link: https://lore.kernel.org/r/20201013073055.11262-1-brgl@bgdev.pl Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-10-16Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-3/+7
Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...
2020-10-14Merge tag 'iommu-updates-v5.10' of ↵Linus Torvalds3-34/+89
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - ARM-SMMU Updates from Will: - Continued SVM enablement, where page-table is shared with CPU - Groundwork to support integrated SMMU with Adreno GPU - Allow disabling of MSI-based polling on the kernel command-line - Minor driver fixes and cleanups (octal permissions, error messages, ...) - Secure Nested Paging Support for AMD IOMMU. The IOMMU will fault when a device tries DMA on memory owned by a guest. This needs new fault-types as well as a rewrite of the IOMMU memory semaphore for command completions. - Allow broken Intel IOMMUs (wrong address widths reported) to still be used for interrupt remapping. - IOMMU UAPI updates for supporting vSVA, where the IOMMU can access address spaces of processes running in a VM. - Support for the MT8167 IOMMU in the Mediatek IOMMU driver. - Device-tree updates for the Renesas driver to support r8a7742. - Several smaller fixes and cleanups all over the place. * tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (57 commits) iommu/vt-d: Gracefully handle DMAR units with no supported address widths iommu/vt-d: Check UAPI data processed by IOMMU core iommu/uapi: Handle data and argsz filled by users iommu/uapi: Rename uapi functions iommu/uapi: Use named union for user data iommu/uapi: Add argsz for user filled data docs: IOMMU user API iommu/qcom: add missing put_device() call in qcom_iommu_of_xlate() iommu/arm-smmu-v3: Add SVA device feature iommu/arm-smmu-v3: Check for SVA features iommu/arm-smmu-v3: Seize private ASID iommu/arm-smmu-v3: Share process page tables iommu/arm-smmu-v3: Move definitions to a header iommu/io-pgtable-arm: Move some definitions to a header iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer iommu/amd: Re-purpose Exclusion range registers to support SNP CWWB iommu/amd: Add support for RMP_PAGE_FAULT and RMP_HW_ERR iommu/amd: Use 4K page for completion wait write-back semaphore iommu/tegra-smmu: Allow to group clients in same swgroup iommu/tegra-smmu: Fix iova->phys translation ...
2020-10-14Merge tag 'acpi-5.10-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it, clean up some non-ACPICA code referring to debug facilities from ACPICA, reduce the overhead related to accessing GPE registers, add a new DPTF (Dynamic Power and Thermal Framework) participant driver, update the ACPICA code in the kernel to upstream revision 20200925, add a new ACPI backlight whitelist entry, fix a few assorted issues and clean up some code. Specifics: - Add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it (Jonathan Cameron) - Clean up some non-ACPICA code referring to debug facilities from ACPICA that are not actually used in there (Hanjun Guo) - Add new DPTF driver for the PCH FIVR participant (Srinivas Pandruvada) - Reduce overhead related to accessing GPE registers in ACPICA and the OS interface layer and make it possible to access GPE registers using logical addresses if they are memory-mapped (Rafael Wysocki) - Update the ACPICA code in the kernel to upstream revision 20200925 including changes as follows: + Add predefined names from the SMBus sepcification (Bob Moore) + Update acpi_help UUID list (Bob Moore) + Return exceptions for string-to-integer conversions in iASL (Bob Moore) + Add a new "ALL <NameSeg>" debugger command (Bob Moore) + Add support for 64 bit risc-v compilation (Colin Ian King) + Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap) - Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex Hung) - Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko) - Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo) - Add missing config_item_put() to fix refcount leak (Hanjun Guo) - Drop lefrover field from struct acpi_memory_device (Hanjun Guo) - Make the ACPI extlog driver check for RDMSR failures (Ben Hutchings) - Fix handling of lid state changes in the ACPI button driver when input device is closed (Dmitry Torokhov) - Fix several assorted build issues (Barnabás Pőcze, John Garry, Nathan Chancellor, Tian Tao) - Drop unused inline functions and reduce code duplication by using kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing) - Serialize tools/power/acpi Makefile (Thomas Renninger)" * tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPICA: Update version to 20200925 Version 20200925 ACPICA: Remove unnecessary semicolon ACPICA: Debugger: Add a new command: "ALL <NameSeg>" ACPICA: iASL: Return exceptions for string-to-integer conversions ACPICA: acpi_help: Update UUID list ACPICA: Add predefined names found in the SMBus sepcification ACPICA: Tree-wide: fix various typos and spelling mistakes ACPICA: Drop the repeated word "an" in a comment ACPICA: Add support for 64 bit risc-v compilation ACPI: button: fix handling lid state changes when input device closed tools/power/acpi: Serialize Makefile ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug() ACPI: memhotplug: Remove 'state' from struct acpi_memory_device ACPI / extlog: Check for RDMSR failure ACPI: Make acpi_evaluate_dsm() prototype consistent docs: mm: numaperf.rst Add brief description for access class 1. node: Add access1 class to represent CPU to memory characteristics ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 ACPI: Let ACPI know we support Generic Initiator Affinity Structures x86: Support Generic Initiator only proximity domains ...
2020-10-13Merge branch 'acpi-numa'Rafael J. Wysocki1-1/+1
* acpi-numa: docs: mm: numaperf.rst Add brief description for access class 1. node: Add access1 class to represent CPU to memory characteristics ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 ACPI: Let ACPI know we support Generic Initiator Affinity Structures x86: Support Generic Initiator only proximity domains ACPI: Support Generic Initiator only domains ACPI / NUMA: Add stub function for pxm_to_node() irq-chip/gic-v3-its: Fix crash if ITS is in a proximity domain without processor or memory ACPI: Remove side effect of partly creating a node in acpi_get_node() ACPI: Rename acpi_map_pxm_to_online_node() to pxm_to_online_node() ACPI: Remove side effect of partly creating a node in acpi_map_pxm_to_online_node() ACPI: Do not create new NUMA domains from ACPI static tables that are not SRAT ACPI: Add out of bounds and numa_off protections to pxm_to_node()
2020-10-12Merge tag 'x86-irq-2020-10-12' of ↵Linus Torvalds2-65/+57
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 irq updates from Thomas Gleixner: "Surgery of the MSI interrupt handling to prepare the support of upcoming devices which require non-PCI based MSI handling: - Cleanup historical leftovers all over the place - Rework the code to utilize more core functionality - Wrap XEN PCI/MSI interrupts into an irqdomain to make irqdomain assignment to PCI devices possible. - Assign irqdomains to PCI devices at initialization time which allows to utilize the full functionality of hierarchical irqdomains. - Remove arch_.*_msi_irq() functions from X86 and utilize the irqdomain which is assigned to the device for interrupt management. - Make the arch_.*_msi_irq() support conditional on a config switch and let the last few users select it" * tag 'x86-irq-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) PCI: MSI: Fix Kconfig dependencies for PCI_MSI_ARCH_FALLBACKS x86/apic/msi: Unbreak DMAR and HPET MSI iommu/amd: Remove domain search for PCI/MSI iommu/vt-d: Remove domain search for PCI/MSI[X] x86/irq: Make most MSI ops XEN private x86/irq: Cleanup the arch_*_msi_irqs() leftovers PCI/MSI: Make arch_.*_msi_irq[s] fallbacks selectable x86/pci: Set default irq domain in pcibios_add_device() iommm/amd: Store irq domain in struct device iommm/vt-d: Store irq domain in struct device x86/xen: Wrap XEN MSI management into irqdomain irqdomain/msi: Allow to override msi_domain_alloc/free_irqs() x86/xen: Consolidate XEN-MSI init x86/xen: Rework MSI teardown x86/xen: Make xen_msi_init() static and rename it to xen_hvm_msi_init() PCI/MSI: Provide pci_dev_has_special_msi_domain() helper PCI_vmd_Mark_VMD_irqdomain_with_DOMAIN_BUS_VMD_MSI irqdomain/msi: Provide DOMAIN_BUS_VMD_MSI x86/irq: Initialize PCI/MSI domain at PCI init time x86/pci: Reducde #ifdeffery in PCI init code ...
2020-10-12Merge tag 'x86_pasid_for_5.10' of ↵Linus Torvalds5-43/+70
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 PASID updates from Borislav Petkov: "Initial support for sharing virtual addresses between the CPU and devices which doesn't need pinning of pages for DMA anymore. Add support for the command submission to devices using new x86 instructions like ENQCMD{,S} and MOVDIR64B. In addition, add support for process address space identifiers (PASIDs) which are referenced by those command submission instructions along with the handling of the PASID state on context switch as another extended state. Work by Fenghua Yu, Ashok Raj, Yu-cheng Yu and Dave Jiang" * tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction x86/asm: Carve out a generic movdir64b() helper for general usage x86/mmu: Allocate/free a PASID x86/cpufeatures: Mark ENQCMD as disabled when configured out mm: Add a pasid member to struct mm_struct x86/msr-index: Define an IA32_PASID MSR x86/fpu/xstate: Add supervisor PASID state for ENQCMD x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions Documentation/x86: Add documentation for SVA (Shared Virtual Addressing) iommu/vt-d: Change flags type to unsigned int in binding mm drm, iommu: Change type of pasid to u32
2020-10-07Merge branches 'arm/allwinner', 'arm/mediatek', 'arm/renesas', 'arm/tegra', ↵Joerg Roedel3-34/+89
'arm/qcom', 'arm/smmu', 'ppc/pamu', 'x86/amd', 'x86/vt-d' and 'core' into next
2020-10-07iommu/vt-d: Gracefully handle DMAR units with no supported address widthsDavid Woodhouse1-15/+31
Instead of bailing out completely, such a unit can still be used for interrupt remapping. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/linux-iommu/549928db2de6532117f36c9c810373c14cf76f51.camel@infradead.org/ Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-10-06dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>Christoph Hellwig1-1/+1
Merge dma-contiguous.h into dma-map-ops.h, after removing the comment describing the contiguous allocator into kernel/dma/contigous.c. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-06dma-mapping: split <linux/dma-mapping.h>Christoph Hellwig1-1/+1
Split out all the bits that are purely for dma_map_ops implementations and related code into a new <linux/dma-map-ops.h> header so that they don't get pulled into all the drivers. That also means the architecture specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h> any more, which leads to a missing includes that were pulled in by the x86 or arm versions in a few not overly portable drivers. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-01iommu/vt-d: Fix lockdep splat in iommu_flush_dev_iotlb()Lu Baolu1-2/+2
Lock(&iommu->lock) without disabling irq causes lockdep warnings. [ 12.703950] ======================================================== [ 12.703962] WARNING: possible irq lock inversion dependency detected [ 12.703975] 5.9.0-rc6+ #659 Not tainted [ 12.703983] -------------------------------------------------------- [ 12.703995] systemd-udevd/284 just changed the state of lock: [ 12.704007] ffffffffbd6ff4d8 (device_domain_lock){..-.}-{2:2}, at: iommu_flush_dev_iotlb.part.57+0x2e/0x90 [ 12.704031] but this lock took another, SOFTIRQ-unsafe lock in the past: [ 12.704043] (&iommu->lock){+.+.}-{2:2} [ 12.704045] and interrupts could create inverse lock ordering between them. [ 12.704073] other info that might help us debug this: [ 12.704085] Possible interrupt unsafe locking scenario: [ 12.704097] CPU0 CPU1 [ 12.704106] ---- ---- [ 12.704115] lock(&iommu->lock); [ 12.704123] local_irq_disable(); [ 12.704134] lock(device_domain_lock); [ 12.704146] lock(&iommu->lock); [ 12.704158] <Interrupt> [ 12.704164] lock(device_domain_lock); [ 12.704174] *** DEADLOCK *** Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200927062428.13713-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-10-01iommu/vt-d: Check UAPI data processed by IOMMU coreJacob Pan2-4/+10
IOMMU generic layer already does sanity checks on UAPI data for version match and argsz range based on generic information. This patch adjusts the following data checking responsibilities: - removes the redundant version check from VT-d driver - removes the check for vendor specific data size - adds check for the use of reserved/undefined flags Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/1601051567-54787-7-git-send-email-jacob.jun.pan@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-10-01iommu/uapi: Use named union for user dataJacob Pan2-12/+12
IOMMU UAPI data size is filled by the user space which must be validated by the kernel. To ensure backward compatibility, user data can only be extended by either re-purpose padding bytes or extend the variable sized union at the end. No size change is allowed before the union. Therefore, the minimum size is the offset of the union. To use offsetof() on the union, we must make it named. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/linux-iommu/20200611145518.0c2817d6@x1.home/ Link: https://lore.kernel.org/r/1601051567-54787-4-git-send-email-jacob.jun.pan@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-25dma-mapping: add a new dma_alloc_pages APIChristoph Hellwig1-0/+4
This API is the equivalent of alloc_pages, except that the returned memory is guaranteed to be DMA addressable by the passed in device. The implementation will also be used to provide a more sensible replacement for DMA_ATTR_NON_CONSISTENT flag. Additionally dma_alloc_noncoherent is switched over to use dma_alloc_pages as its backend. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> (MIPS part)
2020-09-25Merge branch 'master' of ↵Christoph Hellwig2-54/+70
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into dma-mapping-for-next Pull in the latest 5.9 tree for the commit to revert the V4L2_FLAG_MEMORY_NON_CONSISTENT uapi addition.
2020-09-24ACPI: Do not create new NUMA domains from ACPI static tables that are not SRATJonathan Cameron1-1/+1
Several ACPI static tables contain references to proximity domains. ACPI 6.3 has clarified that only entries in SRAT may define a new domain (sec 5.2.16). Those tables described in the ACPI spec have additional clarifying text. NFIT: Table 5-132, "Integer that represents the proximity domain to which the memory belongs. This number must match with corresponding entry in the SRAT table." HMAT: Table 5-145, "... This number must match with the corresponding entry in the SRAT table's processor affinity structure ... if the initiator is a processor, or the Generic Initiator Affinity Structure if the initiator is a generic initiator". IORT and DMAR are defined by external specifications. Intel Virtualization Technology for Directed I/O Rev 3.1 does not make any explicit statements, but the general SRAT statement above will still apply. https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf IO Remapping Table, Platform Design Document rev D, also makes not explicit statement, but refers to ACPI SRAT table for more information and again the generic SRAT statement above applies. https://developer.arm.com/documentation/den0049/d/ In conclusion, any proximity domain specified in these tables, should be a reference to a proximity domain also found in SRAT, and they should not be able to instantiate a new domain. Hence we switch to pxm_to_node() which will only return existing nodes. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Barry Song <song.bao.hua@hisilicon.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-24iommu/vt-d: Use device numa domain if RHSA is missingLu Baolu1-2/+35
If there are multiple NUMA domains but the RHSA is missing in ACPI/DMAR table, we could default to the device NUMA domain as fall back. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Link: https://lore.kernel.org/r/20200904010303.2961-1-baolu.lu@linux.intel.com Link: https://lore.kernel.org/r/20200922060843.31546-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-17x86/mmu: Allocate/free a PASIDFenghua Yu1-1/+27
A PASID is allocated for an "mm" the first time any thread binds to an SVA-capable device and is freed from the "mm" when the SVA is unbound by the last thread. It's possible for the "mm" to have different PASID values in different binding/unbinding SVA cycles. The mm's PASID (non-zero for valid PASID or 0 for invalid PASID) is propagated to a per-thread PASID MSR for all threads within the mm through IPI, context switch, or inherited. This is done to ensure that a running thread has the right PASID in the MSR matching the mm's PASID. [ bp: s/SVM/SVA/g; massage. ] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1600187413-163670-10-git-send-email-fenghua.yu@intel.com
2020-09-17iommu/vt-d: Change flags type to unsigned int in binding mmFenghua Yu1-3/+4
"flags" passed to intel_svm_bind_mm() is a bit mask and should be defined as "unsigned int" instead of "int". Change its type to "unsigned int". Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/1600187413-163670-3-git-send-email-fenghua.yu@intel.com
2020-09-17drm, iommu: Change type of pasid to u32Fenghua Yu5-39/+39
PASID is defined as a few different types in iommu including "int", "u32", and "unsigned int". To be consistent and to match with uapi definitions, define PASID and its variations (e.g. max PASID) as "u32". "u32" is also shorter and a little more explicit than "unsigned int". No PASID type change in uapi although it defines PASID as __u64 in some places. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/1600187413-163670-2-git-send-email-fenghua.yu@intel.com
2020-09-16iommu/vt-d: Remove domain search for PCI/MSI[X]Thomas Gleixner1-3/+0
Now that the domain can be retrieved through device::msi_domain the domain search for PCI_MSI[X] is not longer required. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200826112334.305699301@linutronix.de
2020-09-16iommm/vt-d: Store irq domain in struct deviceThomas Gleixner2-0/+19
As a first step to make X86 utilize the direct MSI irq domain operations store the irq domain pointer in the device struct when a device is probed. This is done from dmar_pci_bus_add_dev() because it has to work even when DMA remapping is disabled. It only overrides the irqdomain of devices which are handled by a regular PCI/MSI irq domain which protects PCI devices behind special busses like VMD which have their own irq domain. No functional change. It just avoids the redirection through arch_*_msi_irqs() and allows the PCI/MSI core to directly invoke the irq domain alloc/free functions instead of having to look up the irq domain for every single MSI interupt. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200826112333.714566121@linutronix.de
2020-09-16x86/msi: Consolidate MSI allocationThomas Gleixner1-2/+2
Convert the interrupt remap drivers to retrieve the pci device from the msi descriptor and use info::hwirq. This is the first step to prepare x86 for using the generic MSI domain ops. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Wei Liu <wei.liu@kernel.org> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200826112332.466405395@linutronix.de
2020-09-16x86_ioapic_Consolidate_IOAPIC_allocationThomas Gleixner1-9/+9
Move the IOAPIC specific fields into their own struct and reuse the common devid. Get rid of the #ifdeffery as it does not matter at all whether the alloc info is a couple of bytes longer or not. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Wei Liu <wei.liu@kernel.org> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200826112332.054367732@linutronix.de
2020-09-16x86/msi: Consolidate HPET allocationThomas Gleixner1-2/+2
None of the magic HPET fields are required in any way. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200826112331.943993771@linutronix.de
2020-09-16iommu/irq_remapping: Consolidate irq domain lookupThomas Gleixner1-1/+0
Now that the iommu implementations handle the X86_*_GET_PARENT_DOMAIN types, consolidate the two getter functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200826112331.741909337@linutronix.de
2020-09-16iommu/vt-d: Consolidate irq domain getterThomas Gleixner1-43/+24
The irq domain request mode is now indicated in irq_alloc_info::type. Consolidate the two getter functions into one. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200826112331.530546013@linutronix.de
2020-09-16x86/irq: Add allocation type for parent domain retrievalThomas Gleixner1-6/+2
irq_remapping_ir_irq_domain() is used to retrieve the remapping parent domain for an allocation type. irq_remapping_irq_domain() is for retrieving the actual device domain for allocating interrupts for a device. The two functions are similar and can be unified by using explicit modes for parent irq domain retrieval. Add X86_IRQ_ALLOC_TYPE_IOAPIC/HPET_GET_PARENT and use it in the iommu implementations. Drop the parent domain retrieval for PCI_MSI/X as that is unused. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200826112331.436350257@linutronix.de
2020-09-16x86_irq_Rename_X86_IRQ_ALLOC_TYPE_MSI_to_reflect_PCI_dependencyThomas Gleixner1-9/+9
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200826112331.343103175@linutronix.de
2020-09-11dma-direct: rename and cleanup __phys_to_dmaChristoph Hellwig1-1/+1
The __phys_to_dma vs phys_to_dma distinction isn't exactly obvious. Try to improve the situation by renaming __phys_to_dma to phys_to_dma_unencryped, and not forcing architectures that want to override phys_to_dma to actually provide __phys_to_dma. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2020-09-04iommu/vt-d: Handle 36bit addressing for x86-32Chris Wilson1-7/+7
Beware that the address size for x86-32 may exceed unsigned long. [ 0.368971] UBSAN: shift-out-of-bounds in drivers/iommu/intel/iommu.c:128:14 [ 0.369055] shift exponent 36 is too large for 32-bit type 'long unsigned int' If we don't handle the wide addresses, the pages are mismapped and the device read/writes go astray, detected as DMAR faults and leading to device failure. The behaviour changed (from working to broken) in commit fa954e683178 ("iommu/vt-d: Delegate the dma domain to upper layer"), but the error looks older. Fixes: fa954e683178 ("iommu/vt-d: Delegate the dma domain to upper layer") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: James Sewart <jamessewart@arista.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: <stable@vger.kernel.org> # v5.3+ Link: https://lore.kernel.org/r/20200822160209.28512-1-chris@chris-wilson.co.uk Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-04iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set()Lu Baolu1-45/+55
The dev_iommu_priv_set() must be called after probe_device(). This fixes a NULL pointer deference bug when booting a system with kernel cmdline "intel_iommu=on,igfx_off", where the dev_iommu_priv_set() is abused. The following stacktrace was produced: Command line: BOOT_IMAGE=/isolinux/bzImage console=tty1 intel_iommu=on,igfx_off ... DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e DMAR: DRHD base: 0x000000fed91000 flags: 0x1 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da DMAR: RMRR base: 0x0000009aa9f000 end: 0x0000009aabefff DMAR: RMRR base: 0x0000009d000000 end: 0x0000009f7fffff DMAR: No ATSR found BUG: kernel NULL pointer dereference, address: 0000000000000038 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.9.0-devel+ #2 Hardware name: LENOVO 20HGS0TW00/20HGS0TW00, BIOS N1WET46S (1.25s ) 03/30/2018 RIP: 0010:intel_iommu_init+0xed0/0x1136 Code: fe e9 61 02 00 00 bb f4 ff ff ff e9 57 02 00 00 48 63 d1 48 c1 e2 04 48 03 50 20 48 8b 12 48 85 d2 74 0b 48 8b 92 d0 02 00 00 48 89 7a 38 ff c1 e9 15 f5 ff ff 48 c7 c7 60 99 ac a7 49 c7 c7 a0 RSP: 0000:ffff96d180073dd0 EFLAGS: 00010282 RAX: ffff8c91037a7d20 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff RBP: ffff96d180073e90 R08: 0000000000000001 R09: ffff8c91039fe3c0 R10: 0000000000000226 R11: 0000000000000226 R12: 000000000000000b R13: ffff8c910367c650 R14: ffffffffa8426d60 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c9107480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000004b100a001 CR4: 00000000003706e0 Call Trace: ? _raw_spin_unlock_irqrestore+0x1f/0x30 ? call_rcu+0x10e/0x320 ? trace_hardirqs_on+0x2c/0xd0 ? rdinit_setup+0x2c/0x2c ? e820__memblock_setup+0x8b/0x8b pci_iommu_init+0x16/0x3f do_one_initcall+0x46/0x1e4 kernel_init_freeable+0x169/0x1b2 ? rest_init+0x9f/0x9f kernel_init+0xa/0x101 ret_from_fork+0x22/0x30 Modules linked in: CR2: 0000000000000038 ---[ end trace 3653722a6f936f18 ]--- Fixes: 01b9d4e21148c ("iommu/vt-d: Use dev_iommu_priv_get/set()") Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Reported-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Link: https://lore.kernel.org/linux-iommu/96717683-70be-7388-3d2f-61131070a96a@secunet.com/ Link: https://lore.kernel.org/r/20200903065132.16879-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-04iommu/vt-d: Serialize IOMMU GCMD register modificationsLu Baolu1-2/+8
The VT-d spec requires (10.4.4 Global Command Register, GCMD_REG General Description) that: If multiple control fields in this register need to be modified, software must serialize the modifications through multiple writes to this register. However, in irq_remapping.c, modifications of IRE and CFI are done in one write. We need to do two separate writes with STS checking after each. It also checks the status register before writing command register to avoid unnecessary register write. Fixes: af8d102f999a4 ("x86/intel/irq_remapping: Clean up x2apic opt-out security warning mess") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Link: https://lore.kernel.org/r/20200828000615.8281-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-04iommu/vt-d: Drop kerneldoc marker from regular commentKrzysztof Kozlowski1-1/+1
Fix W=1 compile warnings (invalid kerneldoc): drivers/iommu/intel/dmar.c:389: warning: Function parameter or member 'header' not described in 'dmar_parse_one_drhd' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200728170859.28143-2-krzk@kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+0
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-12Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+2
Merge more updates from Andrew Morton: - most of the rest of MM (memcg, hugetlb, vmscan, proc, compaction, mempolicy, oom-kill, hugetlbfs, migration, thp, cma, util, memory-hotplug, cleanups, uaccess, migration, gup, pagemap), - various other subsystems (alpha, misc, sparse, bitmap, lib, bitops, checkpatch, autofs, minix, nilfs, ufs, fat, signals, kmod, coredump, exec, kdump, rapidio, panic, kcov, kgdb, ipc). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits) mm/gup: remove task_struct pointer for all gup code mm: clean up the last pieces of page fault accountings mm/xtensa: use general page fault accounting mm/x86: use general page fault accounting mm/sparc64: use general page fault accounting mm/sparc32: use general page fault accounting mm/sh: use general page fault accounting mm/s390: use general page fault accounting mm/riscv: use general page fault accounting mm/powerpc: use general page fault accounting mm/parisc: use general page fault accounting mm/openrisc: use general page fault accounting mm/nios2: use general page fault accounting mm/nds32: use general page fault accounting mm/mips: use general page fault accounting mm/microblaze: use general page fault accounting mm/m68k: use general page fault accounting mm/ia64: use general page fault accounting mm/hexagon: use general page fault accounting mm/csky: use general page fault accounting ...
2020-08-12mm: do page fault accounting in handle_mm_faultPeter Xu1-1/+2
Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12Merge tag 'iommu-updates-v5.9' of ↵Linus Torvalds8-151/+462
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Remove of the dev->archdata.iommu (or similar) pointers from most architectures. Only Sparc is left, but this is private to Sparc as their drivers don't use the IOMMU-API. - ARM-SMMU updates from Will Deacon: - Support for SMMU-500 implementation in Marvell Armada-AP806 SoC - Support for SMMU-500 implementation in NVIDIA Tegra194 SoC - DT compatible string updates - Remove unused IOMMU_SYS_CACHE_ONLY flag - Move ARM-SMMU drivers into their own subdirectory - Intel VT-d updates from Lu Baolu: - Misc tweaks and fixes for vSVA - Report/response page request events - Cleanups - Move the Kconfig and Makefile bits for the AMD and Intel drivers into their respective subdirectory. - MT6779 IOMMU Support - Support for new chipsets in the Renesas IOMMU driver - Other misc cleanups and fixes (e.g. to improve compile test coverage) * tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits) iommu/amd: Move Kconfig and Makefile bits down into amd directory iommu/vt-d: Move Kconfig and Makefile bits down into intel directory iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu iommu: Add gfp parameter to io_pgtable_ops->map() iommu: Mark __iommu_map_sg() as static iommu/vt-d: Rename intel-pasid.h to pasid.h iommu/vt-d: Add page response ops support iommu/vt-d: Report page request faults for guest SVA iommu/vt-d: Add a helper to get svm and sdev for pasid iommu/vt-d: Refactor device_to_iommu() helper iommu/vt-d: Disable multiple GPASID-dev bind iommu/vt-d: Warn on out-of-range invalidation address iommu/vt-d: Fix devTLB flush for vSVA iommu/vt-d: Handle non-page aligned address iommu/vt-d: Fix PASID devTLB invalidation iommu/vt-d: Remove global page support in devTLB flush iommu/vt-d: Enforce PASID devTLB field mask iommu: Make some functions static iommu/amd: Remove double zero check ...
2020-08-11Merge tag 'locking-urgent-2020-08-10' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Thomas Gleixner: "A set of locking fixes and updates: - Untangle the header spaghetti which causes build failures in various situations caused by the lockdep additions to seqcount to validate that the write side critical sections are non-preemptible. - The seqcount associated lock debug addons which were blocked by the above fallout. seqcount writers contrary to seqlock writers must be externally serialized, which usually happens via locking - except for strict per CPU seqcounts. As the lock is not part of the seqcount, lockdep cannot validate that the lock is held. This new debug mechanism adds the concept of associated locks. sequence count has now lock type variants and corresponding initializers which take a pointer to the associated lock used for writer serialization. If lockdep is enabled the pointer is stored and write_seqcount_begin() has a lockdep assertion to validate that the lock is held. Aside of the type and the initializer no other code changes are required at the seqcount usage sites. The rest of the seqcount API is unchanged and determines the type at compile time with the help of _Generic which is possible now that the minimal GCC version has been moved up. Adding this lockdep coverage unearthed a handful of seqcount bugs which have been addressed already independent of this. While generally useful this comes with a Trojan Horse twist: On RT kernels the write side critical section can become preemtible if the writers are serialized by an associated lock, which leads to the well known reader preempts writer livelock. RT prevents this by storing the associated lock pointer independent of lockdep in the seqcount and changing the reader side to block on the lock when a reader detects that a writer is in the write side critical section. - Conversion of seqcount usage sites to associated types and initializers" * tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) locking/seqlock, headers: Untangle the spaghetti monster locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header x86/headers: Remove APIC headers from <asm/smp.h> seqcount: More consistent seqprop names seqcount: Compress SEQCNT_LOCKNAME_ZERO() seqlock: Fold seqcount_LOCKNAME_init() definition seqlock: Fold seqcount_LOCKNAME_t definition seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g hrtimer: Use sequence counter with associated raw spinlock kvm/eventfd: Use sequence counter with associated spinlock userfaultfd: Use sequence counter with associated spinlock NFSv4: Use sequence counter with associated spinlock iocost: Use sequence counter with associated spinlock raid5: Use sequence counter with associated spinlock vfs: Use sequence counter with associated spinlock timekeeping: Use sequence counter with associated raw spinlock xfrm: policy: Use sequence counters with associated lock netfilter: nft_set_rbtree: Use sequence counter with associated rwlock netfilter: conntrack: Use sequence counter with associated spinlock sched: tasks: Use sequence counter with associated spinlock ...
2020-08-08Merge tag 'pci-v5.9-changes' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Fix pci_cfg_wait queue locking problem (Bjorn Helgaas) - Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi Saheed) - Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi Saheed) - Fix pci_create_slot() reference count leak (Qiushi Wu) - Announce device after early fixups (Tiezhu Yang) PCI device hotplug: - Make rpadlpar functions static (Wei Yongjun) Driver binding: - Add device even if driver attach failed (Rajat Jain) Virtualization: - xen: Remove redundant initialization of irq (Colin Ian King) IOMMU: - Add pci_pri_supported() to check device or associated PF (Ashok Raj) - Release IVRS table in AMD ACS quirk (Hanjun Guo) - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng) - Treat "external-facing" devices themselves as internal (Rajat Jain) MSI: - Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr Stankiewicz) Error handling: - Clear PCIe Device Status errors only if OS owns AER (Jonathan Cameron) - Log correctable errors as warning, not error (Matt Jolly) - Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc Van Oostenryck) Peer-to-peer DMA: - Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe) ASPM: - Add missing newline in sysfs 'policy' (Xiongfeng Wang) Native PCIe controllers: - Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng) - Convert to devm_platform_ioremap_resource() (Dejin Zheng) - Remove duplicate error message from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Fix runtime PM imbalance on error (Dinghao Liu) - Remove dev_err() when handing an error from platform_get_irq() (Krzysztof Wilczyński) - Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) ARM Versatile PCIe controller driver: - Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring) Cadence PCIe controller driver: - Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property (Kishon Vijay Abraham I) - Remove "mem" from reg binding (Kishon Vijay Abraham I) - Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I) - Convert all r/w accessors to perform only 32-bit accesses (Kishon Vijay Abraham I) - Add support to start link and verify link status (Kishon Vijay Abraham I) - Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I) - Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I) - Fix updating Vendor ID and Subsystem Vendor ID register (Kishon Vijay Abraham I) - Use bridge resources for outbound window setup (Rob Herring) - Remove private bus number and range storage (Rob Herring) Cadence PCIe endpoint driver: - Add MSI-X support (Alan Douglas) HiSilicon PCIe controller driver: - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring) Intel VMD host bridge driver: - Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick) Loongson PCIe controller driver: - Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang) Marvell Aardvark PCIe controller driver: - Indicate error in 'val' when config read fails (Pali Rohár) - Don't touch PCIe registers if no card connected (Pali Rohár) Marvell MVEBU PCIe controller driver: - Setup BAR0 in order to fix MSI (Shmuel Hazan) Microsoft Hyper-V host bridge driver: - Fix a timing issue which causes kdump to fail occasionally (Wei Hu) - Make some functions static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Revert tegra124 raw_violation_fixup (Nicolas Chauvet) - Remove PLL power supplies (Thierry Reding) Qualcomm PCIe controller driver: - Change duplicate PCI reset to phy reset (Abhishek Sahu) - Add missing ipq806x clocks in PCIe driver (Ansuel Smith) - Add missing reset for ipq806x (Ansuel Smith) - Add ext reset (Ansuel Smith) - Use bulk clk API and assert on error (Ansuel Smith) - Add support for tx term offset for rev 2.1.0 (Ansuel Smith) - Define some PARF params needed for ipq8064 SoC (Ansuel Smith) - Add ipq8064 rev2 variant (Ansuel Smith) - Support PCI speed set for ipq806x (Sham Muthayyan) Renesas R-Car PCIe controller driver: - Use devm_pci_alloc_host_bridge() (Rob Herring) - Use struct pci_host_bridge.windows list directly (Rob Herring) - Convert rcar-gen2 to use modern host bridge probe functions (Rob Herring) TI J721E PCIe driver: - Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I) Xilinx Versal CPM PCIe controller driver: - Add Versal CPM Root Port driver and YAML schema (Bharat Kumar Gogada) MicroSemi Switchtec management driver: - Add missing __iomem and __user tags to fix sparse warnings (Logan Gunthorpe) Miscellaneous: - Replace http:// links with https:// (Alexander A. Klimov) - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas) - Remove unused pci_lost_interrupt() (Heiner Kallweit) - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen) - Fix kerneldoc warnings (Krzysztof Kozlowski)" * tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: Fix kerneldoc warnings PCI: xilinx-cpm: Add Versal CPM Root Port driver PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: Remove dev_err() when handing an error from platform_get_irq() MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe misc: pci_endpoint_test: Add J721E in pci_device_id table PCI: j721e: Add TI J721E PCIe driver PCI: switchtec: Add missing __iomem tag to fix sparse warnings PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings PCI: rpadlpar: Make functions static PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs PCI: Release IVRS table in AMD ACS quirk PCI: Announce device after early fixups PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken PCI: Remove unused pci_lost_interrupt() dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC ...
2020-08-06x86/headers: Remove APIC headers from <asm/smp.h>Ingo Molnar1-0/+1
The APIC headers are relatively complex and bring in additional header dependencies - while smp.h is a relatively simple header included from high level headers. Remove the dependency and add in the missing #include's in .c files where they gained it indirectly before. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-08-06Merge branch 'pci/virtualization'Bjorn Helgaas1-1/+1
- Remove redundant variable init in xen (Colin Ian King) - Add pci_pri_supported() to check device or associated PF for PRI support (Ashok Raj) - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng) - Release IVRS table in AMD ACS quirk (Hanjun Guo) * pci/virtualization: PCI: Release IVRS table in AMD ACS quirk PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken PCI/ATS: Add pci_pri_supported() to check device or associated PF xen: Remove redundant initialization of irq
2020-08-04Merge tag 'uninit-macro-v5.9-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull uninitialized_var() macro removal from Kees Cook: "This is long overdue, and has hidden too many bugs over the years. The series has several "by hand" fixes, and then a trivial treewide replacement. - Clean up non-trivial uses of uninitialized_var() - Update documentation and checkpatch for uninitialized_var() removal - Treewide removal of uninitialized_var()" * tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler: Remove uninitialized_var() macro treewide: Remove uninitialized_var() usage checkpatch: Remove awareness of uninitialized_var() macro mm/debug_vm_pgtable: Remove uninitialized_var() usage f2fs: Eliminate usage of uninitialized_var() macro media: sur40: Remove uninitialized_var() usage KVM: PPC: Book3S PR: Remove uninitialized_var() usage clk: spear: Remove uninitialized_var() usage clk: st: Remove uninitialized_var() usage spi: davinci: Remove uninitialized_var() usage ide: Remove uninitialized_var() usage rtlwifi: rtl8192cu: Remove uninitialized_var() usage b43: Remove uninitialized_var() usage drbd: Remove uninitialized_var() usage x86/mm/numa: Remove uninitialized_var() usage docs: deprecated.rst: Add uninitialized_var()
2020-07-29Merge branches 'arm/renesas', 'arm/qcom', 'arm/mediatek', 'arm/omap', ↵Joerg Roedel8-151/+461
'arm/exynos', 'arm/smmu', 'ppc/pamu', 'x86/vt-d', 'x86/amd' and 'core' into next
2020-07-29iommu/vt-d: Move Kconfig and Makefile bits down into intel directoryJerry Snitselaar2-0/+93
Move Intel Kconfig and Makefile bits down into intel directory with the rest of the Intel specific files. Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200630200636.48600-2-jsnitsel@redhat.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-07-24PCI/ATS: Add pci_pri_supported() to check device or associated PFAshok Raj1-1/+1
For SR-IOV, the PF PRI is shared between the PF and any associated VFs, and the PRI Capability is allowed for PFs but not for VFs. Searching for the PRI Capability on a VF always fails, even if its associated PF supports PRI. Add pci_pri_supported() to check whether device or its associated PF supports PRI. [bhelgaas: commit log, avoid "!!"] Fixes: b16d0cb9e2fc ("iommu/vt-d: Always enable PASID/PRI PCI capabilities before ATS") Link: https://lore.kernel.org/r/1595543849-19692-1-git-send-email-ashok.raj@intel.com Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Joerg Roedel <jroedel@suse.de> Cc: stable@vger.kernel.org # v4.4+
2020-07-24iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommuLu Baolu2-0/+28
The VT-d spec requires (10.4.4 Global Command Register, TE field) that: Hardware implementations supporting DMA draining must drain any in-flight DMA read/write requests queued within the Root-Complex before completing the translation enable command and reflecting the status of the command through the TES field in the Global Status register. Unfortunately, some integrated graphic devices fail to do so after some kind of power state transition. As the result, the system might stuck in iommu_disable_translation(), waiting for the completion of TE transition. This provides a quirk list for those devices and skips TE disabling if the qurik hits. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=208363 Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=206571 Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Koba Ko <koba.ko@canonical.com> Tested-by: Jun Miao <jun.miao@windriver.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200723013437.2268-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-07-24iommu/vt-d: Rename intel-pasid.h to pasid.hLu Baolu5-5/+5
As Intel VT-d files have been moved to its own subdirectory, the prefix makes no sense. No functional changes. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200724014925.15523-13-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-06 20:51:55 +0300