summaryrefslogtreecommitdiff
path: root/drivers/iommu/mtk_iommu_v1.c
AgeCommit message (Collapse)AuthorFilesLines
2022-03-28Merge tag 'driver-core-5.18-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.18-rc1. Not much here, primarily it was a bunch of cleanups and small updates: - kobj_type cleanups for default_groups - documentation updates - firmware loader minor changes - component common helper added and take advantage of it in many drivers (the largest part of this pull request). All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits) Documentation: update stable review cycle documentation drivers/base/dd.c : Remove the initial value of the global variable Documentation: update stable tree link Documentation: add link to stable release candidate tree devres: fix typos in comments Documentation: add note block surrounding security patch note samples/kobject: Use sysfs_emit instead of sprintf base: soc: Make soc_device_match() simpler and easier to read driver core: dd: fix return value of __setup handler driver core: Refactor sysfs and drv/bus remove hooks driver core: Refactor multiple copies of device cleanup scripts: get_abi.pl: Fix typo in help message kernfs: fix typos in comments kernfs: remove unneeded #if 0 guard ALSA: hda/realtek: Make use of the helper component_compare_dev_name video: omapfb: dss: Make use of the helper component_compare_dev power: supply: ab8500: Make use of the helper component_compare_dev ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of iommu/mediatek: Make use of the helper component_compare/release_of drm: of: Make use of the helper component_release_of ...
2022-03-25Merge tag 'iommu-updates-v5.18' of ↵Linus Torvalds1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - IOMMU Core changes: - Removal of aux domain related code as it is basically dead and will be replaced by iommu-fd framework - Split of iommu_ops to carry domain-specific call-backs separatly - Cleanup to remove useless ops->capable implementations - Improve 32-bit free space estimate in iova allocator - Intel VT-d updates: - Various cleanups of the driver - Support for ATS of SoC-integrated devices listed in ACPI/SATC table - ARM SMMU updates: - Fix SMMUv3 soft lockup during continuous stream of events - Fix error path for Qualcomm SMMU probe() - Rework SMMU IRQ setup to prepare the ground for PMU support - Minor cleanups and refactoring - AMD IOMMU driver: - Some minor cleanups and error-handling fixes - Rockchip IOMMU driver: - Use standard driver registration - MSM IOMMU driver: - Minor cleanup and change to standard driver registration - Mediatek IOMMU driver: - Fixes for IOTLB flushing logic * tag 'iommu-updates-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (47 commits) iommu/amd: Improve amd_iommu_v2_exit() iommu/amd: Remove unused struct fault.devid iommu/amd: Clean up function declarations iommu/amd: Call memunmap in error path iommu/arm-smmu: Account for PMU interrupts iommu/vt-d: Enable ATS for the devices in SATC table iommu/vt-d: Remove unused function intel_svm_capable() iommu/vt-d: Add missing "__init" for rmrr_sanity_check() iommu/vt-d: Move intel_iommu_ops to header file iommu/vt-d: Fix indentation of goto labels iommu/vt-d: Remove unnecessary prototypes iommu/vt-d: Remove unnecessary includes iommu/vt-d: Remove DEFER_DEVICE_DOMAIN_INFO iommu/vt-d: Remove domain and devinfo mempool iommu/vt-d: Remove iova_cache_get/put() iommu/vt-d: Remove finding domain in dmar_insert_one_dev_info() iommu/vt-d: Remove intel_iommu::domains iommu/mediatek: Always tlb_flush_all when each PM resume iommu/mediatek: Add tlb_lock in tlb_flush_all iommu/mediatek: Remove the power status checking in tlb flush all ...
2022-02-28iommu: Split struct iommu_opsLu Baolu1-6/+8
Move the domain specific operations out of struct iommu_ops into a new structure that only has domain specific operations. This solves the problem of needing to know if the method vector for a given operation needs to be retrieved from the device or the domain. Logically the domain ops are the ones that make sense for external subsystems and endpoint drivers to use, while device ops, with the sole exception of domain_alloc, are IOMMU API internals. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20220216025249.3459465-10-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-02-25iommu/mediatek: Make use of the helper component_compare/release_ofYong Wu1-2/+2
Use the common compare/release helpers from component. Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Yunfei Wang <yf.wang@mediatek.com> Cc: Libo Kang <libo.kang@mediatek.com> Cc: Anan Sun <anan.sun@mediatek.com> Cc: Mingyuan Ma <mingyuan.ma@mediatek.com> Cc: Xueqi Zhang <xueqi.zhang@mediatek.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20220214060819.7334-20-yong.wu@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-28media: iommu/mediatek: Add device_link between the consumer and the larb devicesYong Wu1-1/+28
MediaTek IOMMU-SMI diagram is like below. all the consumer connect with smi-larb, then connect with smi-common. M4U | smi-common | ------------- | | ... | | larb1 larb2 | | vdec venc When the consumer works, it should enable the smi-larb's power which also need enable the smi-common's power firstly. Thus, First of all, use the device link connect the consumer and the smi-larbs. then add device link between the smi-larb and smi-common. This patch adds device_link between the consumer and the larbs. When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling pm_runtime_xx to keep the original status of clocks. It can avoid two issues: 1) Display HW show fastlogo abnormally reported in [1]. At the beggining, all the clocks are enabled before entering kernel, but the clocks for display HW(always in larb0) will be gated after clk_enable and clk_disable called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock operation happened before display driver probe. At that time, the display HW will be abnormal. 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip pm_runtime_xx to avoid the deadlock. Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then device_link_removed should be added explicitly. Meanwhile, Currently we don't have a device connect with 2 larbs at the same time. Disallow this case, print the error log. [1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/ [2] https://lore.kernel.org/patchwork/patch/1086569/ Suggested-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623 Acked-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-28media: iommu/mediatek: Add probe_defer for smi-larbYong Wu1-0/+4
Prepare for adding device_link. The iommu consumer should use device_link to connect with the smi-larb(supplier). then the smi-larb should run before the iommu consumer. Here we delay the iommu driver until the smi driver is ready, then all the iommu consumers always are after the smi driver. When there is no this patch, if some consumer drivers run before smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the device_link_add, then device_links_driver_bound will use WARN_ON to complain that the link_status of supplier is not right. device_is_bound may be more elegant here. but it is not allowed to EXPORT from https://lore.kernel.org/patchwork/patch/1334670/. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623 Acked-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-28media: iommu/mediatek: Return ENODEV if the device is NULLYong Wu1-1/+1
The platform device is created at: of_platform_default_populate_init: arch_initcall_sync ->of_platform_populate ->of_platform_device_create_pdata When entering our probe, all the devices should be already created. if it is null, means NODEV. Currently we don't get the fail case. It's a minor fix, no need add fixes tags. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Acked-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-28media: iommu/mediatek-v1: Free the existed fwspec if the master dev already hasYong Wu1-0/+9
When the iommu master device enters of_iommu_xlate, the ops may be NULL(iommu dev is defered), then it will initialize the fwspec here: [<c0c9c5bc>] (dev_iommu_fwspec_set) from [<c06bda80>] (iommu_fwspec_init+0xbc/0xd4) [<c06bd9c4>] (iommu_fwspec_init) from [<c06c0db4>] (of_iommu_xlate+0x7c/0x12c) [<c06c0d38>] (of_iommu_xlate) from [<c06c10e8>] (of_iommu_configure+0x144/0x1e8) BUT the mtk_iommu_v1.c only supports arm32, the probing flow still is a bit weird. We always expect create the fwspec internally. otherwise it will enter here and return fail. static int mtk_iommu_create_mapping(struct device *dev, struct of_phandle_args *args) { ... if (!fwspec) { .... } else if (dev_iommu_fwspec_get(dev)->ops != &mtk_iommu_ops) { >>>>>>>>>>Enter here. return fail.<<<<<<<<<<<< return -EINVAL; } ... } Thus, Free the existed fwspec if the master device already has fwspec. This issue is reported at: https://lore.kernel.org/linux-mediatek/trinity-7d9ebdc9-4849-4d93-bfb5-429dcb4ee449-1626253158870@3c-app-gmx-bs01/ Reported-by: Frank Wunderlich <frank-w@public-files.de> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623 Signed-off-by: Yong Wu <yong.wu@mediatek.com> Acked-by: Joerg Roedel <jroedel@suse.de> Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2021-08-18iommu/mtk: Drop IOVA cookie managementRobin Murphy1-1/+0
The core code bakes its own cookies now. CC: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/b856648e7ee2b1017e7c7c02e2ddd50eaf72cbf7.1628682048.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-06-08iommu: Drop unnecessary of_iommu.h includesRob Herring1-1/+0
The only place of_iommu.h is needed is in drivers/of/device.c. Remove it from everywhere else. Cc: Will Deacon <will@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Yong Wu <yong.wu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: iommu@lists.linux-foundation.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20210527193710.1281746-2-robh@kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-16iommu: Streamline registration interfaceRobin Murphy1-3/+1
Rather than have separate opaque setter functions that are easy to overlook and lead to repetitive boilerplate in drivers, let's pass the relevant initialisation parameters directly to iommu_device_register(). Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/ab001b87c533b6f4db71eb90db6f888953986c36.1617285386.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-16iommu/mediatek-v1: Add error handle for mtk_iommu_probeYong Wu1-4/+18
In the original code, we lack the error handle. This patch adds them. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20210412064843.11614-2-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-16iommu/mediatek-v1: Avoid build fail when build as moduleYong Wu1-34/+28
When this driver build as module, It build fail like: ERROR: modpost: "of_phandle_iterator_args" [drivers/iommu/mtk_iommu_v1.ko] undefined! This patch remove this interface to avoid this build fail. Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20210412064843.11614-1-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu/mediatek-v1: Allow building as moduleYong Wu1-5/+5
This patch only adds support for building the IOMMU-v1 driver as module. Correspondingly switch the config to tristate and update the iommu_ops's owner to THIS_MODULE. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20210326032337.24578-1-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-06-30iommu/mediatek: Do no use dev->archdata.iommuJoerg Roedel1-6/+4
The iommu private pointer is already used in the Mediatek IOMMU v1 driver, so move the dma_iommu_mapping pointer into 'struct mtk_iommu_data' and do not use dev->archdata.iommu anymore. Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20200625130836.1916-9-joro@8bytes.org
2020-05-19iommu/mediatek-v1: Fix a build warning for a unused variable 'data'Yong Wu1-2/+0
This patch fixes a build warning: drivers/iommu/mtk_iommu_v1.c: In function 'mtk_iommu_release_device': >> drivers/iommu/mtk_iommu_v1.c:467:25: warning: variable 'data' set but >> not used [-Wunused-but-set-variable] 467 | struct mtk_iommu_data *data; | ^~~~ It's reported at: https://lore.kernel.org/linux-iommu/202005191458.gY38V8bU%25lkp@intel.com/T/#u Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/1589875064-662-1-git-send-email-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-18iommu/mediatek-v1: Add def_domain_typeYong Wu1-5/+11
The MediaTek V1 IOMMU is arm32 whose default domain type is IOMMU_DOMAIN_UNMANAGED. Add this to satisfy the bus_iommu_probe to enter "probe_finalize". The iommu framework will create a iommu domain for each a device. But all the devices share a iommu domain here, thus we skip all the other domains in the "attach_device" except the domain we create internally with arm_iommu_create_mapping. Also a minor change: in the attach_device, "data" always is not null. Remove "if (!data) return". Signed-off-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/1589530123-30240-1-git-send-email-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/mediatek-v1 Convert to probe/release_device() call-backsJoerg Roedel1-30/+20
Convert the Mediatek-v1 IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-24-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-03-27iommu/mediatek: Use accessor functions for iommu private dataJoerg Roedel1-7/+7
Make use of dev_iommu_priv_set/get() functions. Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Link: https://lore.kernel.org/r/20200326150841.10083-14-joro@8bytes.org
2019-10-15iommu: Add gfp parameter to iommu_ops::mapTom Murphy1-1/+1
Add a gfp_t parameter to the iommu_ops::map function. Remove the needless locking in the AMD iommu driver. The iommu_ops::map function (or the iommu_map function which calls it) was always supposed to be sleepable (according to Joerg's comment in this thread: https://lore.kernel.org/patchwork/patch/977520/ ) and so should probably have had a "might_sleep()" since it was written. However currently the dma-iommu api can call iommu_map in an atomic context, which it shouldn't do. This doesn't cause any problems because any iommu driver which uses the dma-iommu api uses gfp_atomic in it's iommu_ops::map function. But doing this wastes the memory allocators atomic pools. Signed-off-by: Tom Murphy <murphyt7@tcd.ie> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-09-19Merge tag 'devicetree-for-5.4' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - a bunch of DT binding conversions to DT schema format - clean-ups of the Arm idle-states binding - support a default number of cells in of_for_each_phandle() when the cells name is missing - expose dtbs_check and dt_binding_check in the make help - convert writting-schema.md to ReST - HiSilicon reset controller binding updates - add documentation for MT8516 RNG * tag 'devicetree-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (46 commits) of: restore old handling of cells_name=NULL in of_*_phandle_with_args() bus: qcom: fix spelling mistake "ambigous" -> "ambiguous" of: Let of_for_each_phandle fallback to non-negative cell_count iommu: pass cell_count = -1 to of_for_each_phandle with cells_name dt-bindings: arm: Convert Realtek board/soc bindings to json-schema dt-bindings: arm: Convert Actions Semi bindings to jsonschema dt-bindings: Correct spelling in example schema dt-bindings: cpu: Add a support cpu type for cortex-a55 dt-bindings: gpu: mali-midgard: Add samsung exynos5250 compatible dt-bindings: arm: idle-states: Move exit-latency-us explanation dt-bindings: arm: idle-states: Add punctuation to improve readability dt-bindings: arm: idle-states: Correct "constraint guarantees" dt-bindings: arm: idle-states: Correct references to wake-up delay dt-bindings: arm: idle-states: Use "e.g." and "i.e." consistently pinctrl-mcp23s08: Fix property-name in dt-example dt-bindings: Clarify interrupts-extended usage dt-bindings: Convert Arm Mali Utgard GPU to DT schema dt-bindings: Convert Arm Mali Bifrost GPU to DT schema dt-bindings: Convert Arm Mali Midgard GPU to DT schema dt-bindings: irq: Convert Allwinner NMI Controller to a schema ...
2019-09-14iommu: pass cell_count = -1 to of_for_each_phandle with cells_nameUwe Kleine-König1-1/+1
Currently of_for_each_phandle ignores the cell_count parameter when a cells_name is given. I intend to change that and let the iterator fall back to a non-negative cell_count if the cells_name property is missing in the referenced node. To not change how existing of_for_each_phandle's users iterate, fix them to pass cell_count = -1 when also cells_name is given which yields the expected behaviour with and without my change. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Rob Herring <robh@kernel.org>
2019-08-30Merge branch 'arm/smmu' into arm/mediatekJoerg Roedel1-1/+2
2019-08-30iommu/mediatek: Clean up struct mtk_smi_iommuYong Wu1-2/+2
Remove the "struct mtk_smi_iommu" to simplify the code since it has only one item in it right now. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-30memory: mtk-smi: Get rid of need_larbidYong Wu1-2/+0
The "mediatek,larb-id" has already been parsed in MTK IOMMU driver. It's no need to parse it again in SMI driver. Only clean some codes. This patch is fit for all the current mt2701, mt2712, mt7623, mt8173 and mt8183. After this patch, the "mediatek,larb-id" only be needed for mt2712 which have 2 M4Us. In the other SoCs, we can get the larb-id from M4U in which the larbs in the "mediatek,larbs" always are ordered. Correspondingly, the larb_nr in the "struct mtk_smi_iommu" could also be deleted. CC: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-29iommu: Pass struct iommu_iotlb_gather to ->unmap() and ->iotlb_sync()Will Deacon1-1/+2
To allow IOMMU drivers to batch up TLB flushing operations and postpone them until ->iotlb_sync() is called, extend the prototypes for the ->unmap() and ->iotlb_sync() IOMMU ops callbacks to take a pointer to the current iommu_iotlb_gather structure. All affected IOMMU drivers are updated, but there should be no functional change since the extra parameter is ignored for now. Signed-off-by: Will Deacon <will@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-01iommu/mediatek: Fix semicolon code style issueYang Wei1-1/+1
Delete a superfluous semicolon in mtk_iommu_add_device(). Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-01-30Merge tag 'iommu-fixes-v5.0-rc4' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "A few more fixes this time: - Two patches to fix the error path of the map_sg implementation of the AMD IOMMU driver. - Also a missing IOTLB flush is fixed in the AMD IOMMU driver. - Memory leak fix for the Intel IOMMU driver. - Fix a regression in the Mediatek IOMMU driver which caused device initialization to fail (seen as broken HDMI output)" * tag 'iommu-fixes-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix IOMMU page flush when detach device from a domain iommu/mediatek: Use correct fwspec in mtk_iommu_add_device() iommu/vt-d: Fix memory leak in intel_iommu_put_resv_regions() iommu/amd: Unmap all mapped pages in error path of map_sg iommu/amd: Call free_iova_fast with pfn in map_sg
2019-01-23iommu/mediatek: Use correct fwspec in mtk_iommu_add_device()Joerg Roedel1-0/+4
The mtk_iommu_add_device() function keeps the fwspec in an on-stack pointer and calls mtk_iommu_create_mapping(), which might change its source, dev->iommu_fwspec. This causes the on-stack pointer to be obsoleted and the device initialization to fail. Update the on-stack fwspec pointer after mtk_iommu_create_mapping() has been called. Reported-by: Frank Wunderlich <frank-w@public-files.de> Fixes: a9bf2eec5a6f ('iommu/mediatek: Use helper functions to access dev->iommu_fwspec') Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-3/+2
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-20Merge branches 'iommu/fixes', 'arm/renesas', 'arm/mediatek', 'arm/tegra', ↵Joerg Roedel1-26/+21
'arm/omap', 'arm/smmu', 'x86/vt-d', 'x86/amd' and 'core' into next
2018-12-17iommu/mediatek: Use helper functions to access dev->iommu_fwspecJoerg Roedel1-12/+16
Use the new helpers dev_iommu_fwspec_get()/set() to access the dev->iommu_fwspec pointer. This makes it easier to move that pointer later into another struct. Cc: Matthias Brugger <matthias.bgg@gmail.com> Tested-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-03iommu/mediatek: Make it explicitly non-modularPaul Gortmaker1-12/+3
The Kconfig currently controlling compilation of this code is: drivers/iommu/Kconfig:config MTK_IOMMU_V1 drivers/iommu/Kconfig: bool "MTK IOMMU Version 1 (M4U gen1) Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not even used by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Joerg Roedel <joro@8bytes.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Honghui Zhang <honghui.zhang@mediatek.com> Cc: iommu@lists.linux-foundation.org Cc: linux-mediatek@lists.infradead.org Acked-by: Honghui Zhang <honghui.zhang@mediatek.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-11-06iommu/mediatek: Constify iommu_opsArvind Yadav1-2/+2
iommu_ops are not supposed to change at runtime. Functions 'iommu_device_set_ops' and 'bus_set_iommu' working with const iommu_ops provided by <linux/iommu.h>. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> (Change the title to iommu/mediatek: xx) Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-1/+1
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-08iommu: Remove the ->map_sg indirectionChristoph Hellwig1-1/+0
All iommu drivers use the default_iommu_map_sg implementation, and there is no good reason to ever override it. Just expose it as iommu_map_sg directly and remove the indirection, specially in our post-spectre world where indirect calls are horribly expensive. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-04-12Merge tag 'iommu-updates-v4.17' of ↵Linus Torvalds1-33/+21
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - OF_IOMMU support for the Rockchip iommu driver so that it can use generic DT bindings - rework of locking in the AMD IOMMU interrupt remapping code to make it work better in RT kernels - support for improved iotlb flushing in the AMD IOMMU driver - support for 52-bit physical and virtual addressing in the ARM-SMMU - various other small fixes and cleanups * tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (53 commits) iommu/io-pgtable-arm: Avoid warning with 32-bit phys_addr_t iommu/rockchip: Support sharing IOMMU between masters iommu/rockchip: Add runtime PM support iommu/rockchip: Fix error handling in init iommu/rockchip: Use OF_IOMMU to attach devices automatically iommu/rockchip: Use IOMMU device for dma mapping operations dt-bindings: iommu/rockchip: Add clock property iommu/rockchip: Control clocks needed to access the IOMMU iommu/rockchip: Fix TLB flush of secondary IOMMUs iommu/rockchip: Use iopoll helpers to wait for hardware iommu/rockchip: Fix error handling in attach iommu/rockchip: Request irqs in rk_iommu_probe() iommu/rockchip: Fix error handling in probe iommu/rockchip: Prohibit unbind and remove iommu/amd: Return proper error code in irq_remapping_alloc() iommu/amd: Make amd_iommu_devtable_lock a spin_lock iommu/amd: Drop the lock while allocating new irq remap table iommu/amd: Factor out setting the remap table for a devid iommu/amd: Use `table' instead `irt' as variable name in amd_iommu_update_ga() iommu/amd: Remove the special case from alloc_irq_table() ...
2018-04-06headers: untangle kmemleak.h from mm.hRandy Dunlap1-1/+0
Currently <linux/slab.h> #includes <linux/kmemleak.h> for no obvious reason. It looks like it's only a convenience, so remove kmemleak.h from slab.h and add <linux/kmemleak.h> to any users of kmemleak_* that don't already #include it. Also remove <linux/kmemleak.h> from source files that do not use it. This is tested on i386 allmodconfig and x86_64 allmodconfig. It would be good to run it through the 0day bot for other $ARCHes. I have neither the horsepower nor the storage space for the other $ARCHes. Update: This patch has been extensively build-tested by both the 0day bot & kisskb/ozlabs build farms. Both of them reported 2 build failures for which patches are included here (in v2). [ slab.h is the second most used header file after module.h; kernel.h is right there with slab.h. There could be some minor error in the counting due to some #includes having comments after them and I didn't combine all of those. ] [akpm@linux-foundation.org: security/keys/big_key.c needs vmalloc.h, per sfr] Link: http://lkml.kernel.org/r/e4309f98-3749-93e1-4bb7-d9501a39d015@infradead.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reported-by: Michael Ellerman <mpe@ellerman.id.au> [2 build failures] Reported-by: Fengguang Wu <fengguang.wu@intel.com> [2 build failures] Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: John Johansen <john.johansen@canonical.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-13iommu/mediatek: Move attach_device after iommu-group is ready for M4Uv1Yong Wu1-33/+21
In the commit 05f80300dc8b ("iommu: Finish making iommu_group support mandatory"), the iommu framework has supposed all the iommu drivers have their owner iommu-group, it get rid of the FIXME workarounds while the group is NULL. But the flow of Mediatek M4U gen1 looks a bit trick that it will hang at this case: ========================================== Unable to handle kernel NULL pointer dereference at virtual address 00000030 pgd = c0004000 [00000030] *pgd=00000000 PC is at mutex_lock+0x28/0x54 LR is at iommu_attach_device+0xa4/0xd4 pc : [<c07632e8>] lr : [<c04736fc>] psr: 60000013 sp : df0edbb8 ip : df0edbc8 fp : df0edbc4 r10: c114da14 r9 : df2a3e40 r8 : 00000003 r7 : df27a210 r6 : df2a90c4 r5 : 00000030 r4 : 00000000 r3 : df0f8000 r2 : fffff000 r1 : df29c610 r0 : 00000030 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none xxx (mutex_lock) from [<c04736fc>] (iommu_attach_device+0xa4/0xd4) (iommu_attach_device) from [<c011b9dc>] (__arm_iommu_attach_device+0x28/0x90) (__arm_iommu_attach_device) from [<c011ba60>] (arm_iommu_attach_device+0x1c/0x30) (arm_iommu_attach_device) from [<c04759ac>] (mtk_iommu_add_device+0xfc/0x214) (mtk_iommu_add_device) from [<c0472aa4>] (add_iommu_group+0x3c/0x68) (add_iommu_group) from [<c047d044>] (bus_for_each_dev+0x78/0xac) (bus_for_each_dev) from [<c04734a4>] (bus_set_iommu+0xb0/0xec) (bus_set_iommu) from [<c0476310>] (mtk_iommu_probe+0x328/0x368) (mtk_iommu_probe) from [<c048189c>] (platform_drv_probe+0x5c/0xc0) (platform_drv_probe) from [<c047f510>] (driver_probe_device+0x2f4/0x4d8) (driver_probe_device) from [<c047f800>] (__driver_attach+0x10c/0x128) (__driver_attach) from [<c047d044>] (bus_for_each_dev+0x78/0xac) (bus_for_each_dev) from [<c047ec78>] (driver_attach+0x2c/0x30) (driver_attach) from [<c047e640>] (bus_add_driver+0x1e0/0x278) (bus_add_driver) from [<c048052c>] (driver_register+0x88/0x108) (driver_register) from [<c04817ec>] (__platform_driver_register+0x50/0x58) (__platform_driver_register) from [<c0b31380>] (m4u_init+0x24/0x28) (m4u_init) from [<c0101c38>] (do_one_initcall+0xf0/0x17c) ========================= The root cause is that the device's iommu-group is NULL while arm_iommu_attach_device is called. This patch prepare a new iommu-group for the iommu consumer devices to fix this issue. CC: Robin Murphy <robin.murphy@arm.com> CC: Honghui Zhang <honghui.zhang@mediatek.com> Fixes: 05f80300dc8b ("iommu: Finish making iommu_group support mandatory") Reported-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-11-06iommu/mediatek: Fix driver nameMatthias Brugger1-1/+1
There exist two Mediatek iommu drivers for the two different generations of the device. But both drivers have the same name "mtk-iommu". This breaks the registration of the second driver: Error: Driver 'mtk-iommu' is already registered, aborting... Fix this by changing the name for first generation to "mtk-iommu-v1". Fixes: b17336c55d89 ("iommu/mediatek: add support for mtk iommu generation one HW") Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-05-17iommu/mediatek: Include linux/dma-mapping.hArnd Bergmann1-0/+1
The mediatek iommu driver relied on an implicit include of dma-mapping.h, but for some reason that is no longer there in 4.12-rc1: drivers/iommu/mtk_iommu_v1.c: In function 'mtk_iommu_domain_finalise': drivers/iommu/mtk_iommu_v1.c:233:16: error: implicit declaration of function 'dma_zalloc_coherent'; did you mean 'debug_dma_alloc_coherent'? [-Werror=implicit-function-declaration] drivers/iommu/mtk_iommu_v1.c: In function 'mtk_iommu_domain_free': drivers/iommu/mtk_iommu_v1.c:265:2: error: implicit declaration of function 'dma_free_coherent'; did you mean 'debug_dma_free_coherent'? [-Werror=implicit-function-declaration] This adds an explicit #include to make it build again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 208480bb27 ('iommu: Remove trace-events include from iommu.h') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-03iommu/mediatek: Teach MTK-IOMMUv1 about 'struct iommu_device'Joerg Roedel1-1/+24
Make use of the iommu_device_register() interface. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-06Merge branches 'arm/mediatek', 'arm/smmu', 'x86/amd', 's390', 'core' and ↵Joerg Roedel1-62/+43
'arm/exynos' into next
2016-11-15iommu/mediatek: Fix M4Uv1 group refcountingRobin Murphy1-0/+2
For each subsequent device assigned to the m4u_group after its initial allocation, we need to take an additional reference. Otherwise, the caller of iommu_group_get_for_dev() will inadvertently remove the reference taken by iommu_group_add_device(), and the group will be freed prematurely if any device is removed. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-11-10iommu/mediatek: Convert DT component matching to component_match_add_release()Russell King1-3/+5
Convert DT component matching to use component_match_add_release(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-11-10iommu/mediatek: Convert M4Uv1 to iommu_fwspecRobin Murphy1-59/+36
Our per-device data consists of the M4U instance and firmware-provided list of LARB IDs, which is a perfect fit for the generic iommu_fwspec machinery. Use that directly instead of the custom archdata code - while we can't rely on the of_xlate() mechanism to initialise things until the 32-bit ARM DMA code learns about groups and default domains, it still results in a reasonable simplification overall. CC: Honghui Zhang <honghui.zhang@mediatek.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Honghui Zhang <honghui.zhang@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-06-21iommu/mediatek: Make mtk_iommu_pm_ops staticJoerg Roedel1-1/+1
The symbol exists elsewhere already, so that is fails to link if the symbol is non-static. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-06-21iommu/mediatek: add support for mtk iommu generation one HWHonghui Zhang1-0/+727
Mediatek SoC's M4U has two generations of HW architcture. Generation one uses flat, one layer pagetable, and was shipped with ARM architecture, it only supports 4K size page mapping. MT2701 SoC uses this generation one m4u HW. Generation two uses the ARM short-descriptor translation table format for address translation, and was shipped with ARM64 architecture, MT8173 uses this generation two m4u HW. All the two generation iommu HW only have one iommu domain, and all its iommu clients share the same iova address. These two generation m4u HW have slit different register groups and register offset, but most register names are the same. This patch add iommu support for mediatek SoC mt2701. Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-23 00:43:54 +0300