summaryrefslogtreecommitdiff
path: root/drivers/iommu/of_iommu.c
AgeCommit message (Collapse)AuthorFilesLines
2023-02-16iommu/of: mark an unused function as __maybe_unusedRandy Dunlap1-2/+4
When CONFIG_OF_ADDRESS is not set, there is a build warning/error about an unused function. Annotate the function to quieten the warning/error. ../drivers/iommu/of_iommu.c:176:29: warning: 'iommu_resv_region_get_type' defined but not used [-Wunused-function] 176 | static enum iommu_resv_type iommu_resv_region_get_type(struct device *dev, struct resource *phys, | ^~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: a5bf3cfce8cb ("iommu: Implement of_iommu_get_resv_regions()") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Will Deacon <will@kernel.org> Cc: iommu@lists.linux.dev Reviewed-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20230209010359.23831-1-rdunlap@infradead.org [joro: Improve code formatting] Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-25iommu: Implement of_iommu_get_resv_regions()Thierry Reding1-0/+94
This is an implementation that IOMMU drivers can use to obtain reserved memory regions from a device tree node. It uses the reserved-memory DT bindings to find the regions associated with a given device. If these regions are marked accordingly, identity mappings will be created for them in the IOMMU domain that the devices will be attached to. Cc: Frank Rowand <frowand.list@gmail.com> Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20230120174251.4004100-4-thierry.reding@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-11-24iommu/of: Remove linux/msi.h includeThomas Gleixner1-1/+0
Nothing in this file needs anything from linux/msi.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20221113202428.889624434@linutronix.de
2022-08-23Revert "iommu/of: Delete usage of driver_deferred_probe_check_state()"Saravana Kannan1-1/+1
This reverts commit b09796d528bbf06e3e10a4a8f78038719da7ebc6. An issue was reported[1] on the original commit. I'll need to address that before I can delete the use of driver_deferred_probe_check_state(). So, bring it back for now. [1] - https://lore.kernel.org/lkml/4799738.LvFx2qVVIh@steina-w/ Fixes: b09796d528bb ("iommu/of: Delete usage of driver_deferred_probe_check_state()") Reported-by: Jean-Philippe Brucker <jpb@kernel.org> Tested-by: Jean-Philippe Brucker <jpb@kernel.org> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20220819221616.2107893-5-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10iommu/of: Delete usage of driver_deferred_probe_check_state()Saravana Kannan1-1/+1
Now that fw_devlink=on and fw_devlink.strict=1 by default and fw_devlink supports iommu DT properties, the execution will never get to the point where driver_deferred_probe_check_state() is called before the supplier has probed successfully or before deferred probe timeout has expired. So, delete the call and replace it with -ENODEV. Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20220601070707.3946847-9-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-08iommu: Remove unused of_get_dma_window()Rob Herring1-68/+0
of_get_dma_window() was added in 2012 and removed in 2014 in commit 891846516317 ("memory: Add NVIDIA Tegra memory controller support"). Remove it and simplify the header to use forward declarations for structs rather than includes. Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: iommu@lists.linux-foundation.org Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210527193710.1281746-1-robh@kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu/arm-smmu-v3: Use device properties for pasid-num-bitsJean-Philippe Brucker1-5/+0
The pasid-num-bits property shouldn't need a dedicated fwspec field, it's a job for device properties. Add properties for IORT, and access the number of PASID bits using device_property_read_u32(). Suggested-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Acked-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20210401154718.307519-3-jean-philippe@linaro.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-07-28of/device: Add input id to of_dma_configure()Lorenzo Pieralisi1-37/+44
Devices sitting on proprietary busses have a device ID space that is owned by the respective bus and related firmware bindings. In order to let the generic OF layer handle the input translations to an IOMMU id, for such busses the current of_dma_configure() interface should be extended in order to allow the bus layer to provide the device input id parameter - that is retrieved/assigned in bus specific code and firmware. Augment of_dma_configure() to add an optional input_id parameter, leaving current functionality unchanged. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200619082013.13661-8-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28of/iommu: Make of_map_rid() PCI agnosticLorenzo Pieralisi1-2/+2
There is nothing PCI specific (other than the RID - requester ID) in the of_map_rid() implementation, so the same function can be reused for input/output IDs mapping for other busses just as well. Rename the RID instances/names to a generic "id" tag. No functionality change intended. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Joerg Roedel <jroedel@suse.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200619082013.13661-7-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-01-15iommu/arm-smmu-v3: Parse PASID devicetree property of platform devicesJean-Philippe Brucker1-1/+5
For platform devices that support SubstreamID (SSID), firmware provides the number of supported SSID bits. Restrict it to what the SMMU supports and cache it into master->ssid_bits, which will also be used for PCI PASID. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
2019-12-23iommu/of: Take a ref to the IOMMU driver during ->of_xlate()Will Deacon1-6/+12
Ensure that we hold a reference to the IOMMU driver module while calling the '->of_xlate()' callback during early device probing. Signed-off-by: Will Deacon <will@kernel.org> Tested-by: John Garry <john.garry@huawei.com> # smmu v3 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-23iommu/of: Request ACS from the PCI core when configuring IOMMU linkageWill Deacon1-0/+1
To avoid having to export 'pci_request_acs()' to modular IOMMU drivers, move the call into the 'of_dma_configure()' path in a similar manner to the way in which ACS is configured when probing via ACPI/IORT. Signed-off-by: Will Deacon <will@kernel.org> Tested-by: John Garry <john.garry@huawei.com> # smmu v3 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-21PCI: Remove unused includes and superfluous struct declarationKrzysztof Wilczynski1-0/+2
Remove <linux/pci.h> and <linux/msi.h> from being included directly as part of the include/linux/of_pci.h, and remove superfluous declaration of struct of_phandle_args. Move users of include <linux/of_pci.h> to include <linux/pci.h> and <linux/msi.h> directly rather than rely on both being included transitively through <linux/of_pci.h>. Link: https://lore.kernel.org/r/20190903113059.2901-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 335Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 111 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-11iommu/of: Fix probe-deferralRobin Murphy1-1/+1
Whilst iommu_probe_device() does check for non-NULL ops as the previous code did, it does not do so in the same order relative to the other checks, and as a result means that -EPROBE_DEFER returned by of_xlate() (plus any real error condition too) gets overwritten with -EINVAL and leads to various misbehaviour. Reinstate the original logic, but without implicitly relying on ops being set to infer !err as the initial condition (now that the validity of ops for its own sake is checked elsewhere). Fixes: 641fb0efbff0 ("iommu/of: Don't call iommu_ops->add_device directly") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-17iommu/of: Don't call iommu_ops->add_device directlyJoerg Roedel1-3/+3
Make sure to invoke this call-back through the proper function of the IOMMU-API. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-17iommu/of: Use device_iommu_mapped()Joerg Roedel1-1/+1
Use Use device_iommu_mapped() to check if the device is already mapped by an IOMMU. Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-17iommu/of: Use helper functions to access dev->iommu_fwspecJoerg Roedel1-3/+7
Use the new helpers dev_iommu_fwspec_get()/set() to access the dev->iommu_fwspec pointer. This makes it easier to move that pointer later into another struct. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-09-25iommu/of: support iommu configuration for fsl-mc devicesNipun Gupta1-0/+20
With of_pci_map_rid available for all the busses, use the function for configuration of devices on fsl-mc bus Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-09-25iommu/of: make of_pci_map_rid() available for other devices tooNipun Gupta1-3/+2
iommu-map property is also used by devices with fsl-mc. This patch moves the of_pci_map_rid to generic location, so that it can be used by other busses too. 'of_pci_map_rid' is renamed here to 'of_map_rid' and there is no functional change done in the API. Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-07-10iommu: Remove IOMMU_OF_DECLARERob Herring1-18/+1
Now that we use the driver core to stop deferred probe for missing drivers, IOMMU_OF_DECLARE can be removed. This is slightly less optimal than having a list of built-in drivers in that we'll now defer probe twice before giving up. This shouldn't have a significant impact on boot times as past discussions about deferred probe have given no evidence of deferred probe having a substantial impact. Cc: Robin Murphy <robin.murphy@arm.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Frank Rowand <frowand.list@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: iommu@lists.linux-foundation.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: devicetree@vger.kernel.org Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-10iommu: Stop deferring probe at end of initcallsRob Herring1-1/+1
The IOMMU subsystem has its own mechanism to not defer probe if driver support is missing. Now that the driver core supports stopping deferring probe if drivers aren't built-in (and probed), use the driver core support so the IOMMU specific support can be removed. Acked-by: Joerg Roedel <jroedel@suse.de> Cc: iommu@lists.linux-foundation.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17iommu: Clean up of_iommu_init_fnRobin Murphy1-16/+0
Now that no more drivers rely on arbitrary early initialisation via an of_iommu_init_fn hook, let's clean up the redundant remnants. The IOMMU_OF_DECLARE() macro needs to remain for now, as the probe-deferral mechanism has no other nice way to detect built-in drivers before they have registered themselves, such that it can make the right decision. Reviewed-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-09-22iommu/of: Remove PCI host bridge node checkRobin Murphy1-4/+1
of_pci_iommu_init() tries to be clever and stop its alias walk at the device represented by master_np, in case of weird PCI topologies where the bridge to the IOMMU and the rest of the system is not at the root. It turns out this is a bit short-sighted, since there are plenty of other callers of pci_for_each_dma_alias() which would also need the same behaviour in that situation, and the only platform so far with such a topology (Cavium ThunderX2) already solves it more generally via a PCI quirk. As this check is effectively redundant, and returning a boolean value as an int is a bit broken anyway, let's just get rid of it. Reported-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Fixes: d87beb749281 ("iommu/of: Handle PCI aliases properly") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-15iommu/of: Fix of_iommu_configure() for disabled IOMMUsRobin Murphy1-30/+29
Sudeep reports that the logic got slightly broken when a PCI iommu-map entry targets an IOMMU marked as disabled in DT, since of_pci_map_rid() succeeds in following a phandle, and of_iommu_xlate() doesn't return an error value, but we miss checking whether ops was actually non-NULL. Whilst this could be solved with a point fix in of_pci_iommu_init(), it suggests that all the juggling of ERR_PTR values through the ops pointer is proving rather too complicated for its own good, so let's instead simplify the whole flow (with a side-effect of eliminating the cause of the bug). The fact that we now rely on iommu_fwspec means that we no longer need to pass around an iommu_ops pointer at all - we can simply propagate a regular int return value until we know whether we have a viable IOMMU, then retrieve the ops from the fwspec if and when we actually need them. This makes everything a bit more uniform and certainly easier to follow. Fixes: d87beb749281 ("iommu/of: Handle PCI aliases properly") Reported-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-07-26iommu: Convert to using %pOF instead of full_nameRob Herring1-2/+1
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: iommu@lists.linux-foundation.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-07-26iommu/of: Handle PCI aliases properlyRobin Murphy1-57/+47
When a PCI device has DMA quirks, we need to ensure that an upstream IOMMU knows about all possible aliases, since the presence of a DMA quirk does not preclude the device still also emitting transactions (e.g. MSIs) on its 'real' RID. Similarly, the rules for bridge aliasing are relatively complex, and some bridges may only take ownership of transactions under particular transient circumstances, leading again to multiple RIDs potentially being seen at the IOMMU for the given device. Take all this into account in the OF code by translating every RID produced by the alias walk, not just whichever one comes out last. Happily, this also makes things tidy enough that we can reduce the number of both total lines of code, and confusing levels of indirection, by pulling the "iommus"/"iommu-map" parsing helpers back in-line again. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-06-20Merge branch 'WIP.sched/core' into sched/coreIngo Molnar1-0/+7
Conflicts: kernel/sched/Makefile Pick up the waitqueue related renames - it didn't get much feedback, so it appears to be uncontroversial. Famous last words? ;-) Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-30iommu/of: Ignore all errors except EPROBE_DEFERSricharan R1-0/+6
While deferring the probe of IOMMU masters, xlate and add_device callbacks called from of_iommu_configure can pass back error values like -ENODEV, which means the IOMMU cannot be connected with that master for real reasons. Before the IOMMU probe deferral, all such errors were ignored. Now all those errors are propagated back, killing the master's probe for such errors. Instead ignore all the errors except EPROBE_DEFER, which is the only one of concern and let the master work without IOMMU, thus restoring the old behavior. Also make explicit that of_dma_configure handles only -EPROBE_DEFER from of_iommu_configure. Fixes: 7b07cbefb68d ("iommu: of: Handle IOMMU lookup failure with deferred probing or error") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Magnus Damn <magnus.damn@gmail.com> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-05-30iommu/of: Fix check for returning EPROBE_DEFERSricharan R1-0/+1
Now with IOMMU probe deferral, we return -EPROBE_DEFER for masters that are connected to an IOMMU which is not probed yet, but going to get probed, so that we can attach the correct dma_ops. So while trying to defer the probe of the master, check if the of_iommu node that it is connected to is marked in DT as 'status=disabled', then the IOMMU is never is going to get probed. So simply return NULL and let the master work without an IOMMU. Fixes: 7b07cbefb68d ("iommu: of: Handle IOMMU lookup failure with deferred probing or error") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Will Deacon <will.deacon@arm.com> Tested-by: Magnus Damn <magnus.damn@gmail.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-05-23iommu/of: Adjust system_state checkThomas Gleixner1-1/+1
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. Adjust the system_state check in of_iommu_driver_present() to handle the extra states. Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Joerg Roedel <joro@8bytes.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20170516184735.788023442@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-20iommu: of: Handle IOMMU lookup failure with deferred probing or errorLaurent Pinchart1-2/+2
Failures to look up an IOMMU when parsing the DT iommus property need to be handled separately from the .of_xlate() failures to support deferred probing. The lack of a registered IOMMU can be caused by the lack of a driver for the IOMMU, the IOMMU device probe not having been performed yet, having been deferred, or having failed. The first case occurs when the device tree describes the bus master and IOMMU topology correctly but no device driver exists for the IOMMU yet or the device driver has not been compiled in. Return NULL, the caller will configure the device without an IOMMU. The second and third cases are handled by deferring the probe of the bus master device which will eventually get reprobed after the IOMMU. The last case is currently handled by deferring the probe of the bus master device as well. A mechanism to either configure the bus master device without an IOMMU or to fail the bus master device probe depending on whether the IOMMU is optional or mandatory would be a good enhancement. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Laurent Pichart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-20iommu/of: Prepare for deferred IOMMU configurationRobin Murphy1-1/+42
IOMMU configuration represents unchanging properties of the hardware, and as such should only need happen once in a device's lifetime, but the necessary interaction with the IOMMU device and driver complicates exactly when that point should be. Since the only reasonable tool available for handling the inter-device dependency is probe deferral, we need to prepare of_iommu_configure() to run later than it is currently called (i.e. at driver probe rather than device creation), to handle being retried, and to tell whether a not-yet present IOMMU should be waited for or skipped (by virtue of having declared a built-in driver or not). Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-20iommu/of: Refactor of_iommu_configure() for error handlingRobin Murphy1-30/+53
In preparation for some upcoming cleverness, rework the control flow in of_iommu_configure() to minimise duplication and improve the propogation of errors. It's also as good a time as any to switch over from the now-just-a-compatibility-wrapper of_iommu_get_ops() to using the generic IOMMU instance interface directly. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-10Merge branches 'iommu/fixes', 'arm/exynos', 'arm/renesas', 'arm/smmu', ↵Joerg Roedel1-2/+2
'arm/mediatek', 'arm/core', 'x86/vt-d' and 'core' into next
2017-01-26iommu: Drop the of_iommu_{set/get}_ops() interfaceLorenzo Pieralisi1-2/+2
With the introduction of the new iommu_{register/get}_instance() interface in commit e4f10ffe4c9b ("iommu: Make of_iommu_set/get_ops() DT agnostic") (based on struct fwnode_handle as look-up token, so firmware agnostic) to register IOMMU instances with the core IOMMU layer there is no reason to keep the old OF based interface around any longer. Convert all the IOMMU drivers (and OF IOMMU core code) that rely on the of_iommu_{set/get}_ops() to the new kernel interface to register/retrieve IOMMU instances and remove the of_iommu_{set/get}_ops() remaining glue code in order to complete the interface rework. Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-11-29iommu: Make of_iommu_set/get_ops() DT agnosticLorenzo Pieralisi1-39/+0
The of_iommu_{set/get}_ops() API is used to associate a device tree node with a specific set of IOMMU operations. The same kernel interface is required on systems booting with ACPI, where devices are not associated with a device tree node, therefore the interface requires generalization. The struct device fwnode member represents the fwnode token associated with the device and the struct it points at is firmware specific; regardless, it is initialized on both ACPI and DT systems and makes an ideal candidate to use it to associate a set of IOMMU operations to a given device, through its struct device.fwnode member pointer, paving the way for representing per-device iommu_ops (ie an iommu instance associated with a device). Convert the DT specific of_iommu_{set/get}_ops() interface to use struct device.fwnode as a look-up token, making the interface usable on ACPI systems and rename the data structures and the registration API so that they are made to represent their usage more clearly. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-16iommu: Introduce iommu_fwspecRobin Murphy1-2/+6
Introduce a common structure to hold the per-device firmware data that most IOMMU drivers need to keep track of. This enables us to configure much of that data from common firmware code, and consolidate a lot of the equivalent implementations, device look-up tables, etc. which are currently strewn across IOMMU drivers. This will also be enable us to address the outstanding "multiple IOMMUs on the platform bus" problem by tweaking IOMMU API calls to prefer dev->fwspec->ops before falling back to dev->bus->iommu_ops, and thus gracefully handle those troublesome systems which we currently cannot. As the first user, hook up the OF IOMMU configuration mechanism. The driver-defined nature of DT cells means that we still need the drivers to translate and add the IDs themselves, but future users such as the much less free-form ACPI IORT will be much simpler and self-contained. CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-16iommu/of: Handle iommu-map property for PCIRobin Murphy1-5/+41
Now that we have a way to pick up the RID translation and target IOMMU, hook up of_iommu_configure() to bring PCI devices into the of_xlate mechanism and allow them IOMMU-backed DMA ops without the need for driver-specific handling. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-23of: iommu: make of_iommu_init() postcore_initcall_syncKefeng Wang1-1/+4
The of_iommu_init() is called multiple times by arch code, make it postcore_initcall_sync, then we can drop relevant calls fully. Note, the IOMMUs should have a chance to perform some basic initialisation before we start adding masters to them. So postcore_initcall_sync is good choice, it ensures of_iommu_init() called before of_platform_populate. Acked-by: Rich Felker <dalias@libc.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Rob Herring <robh@kernel.org>
2016-05-09iommu: of: enforce const-ness of struct iommu_opsRobin Murphy1-7/+7
As a set of driver-provided callbacks and static data, there is no compelling reason for struct iommu_ops to be mutable in core code, so enforce const-ness throughout. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-02-18of: iommu: Increment DT node refcount in of_iommu_set_ops()Anup Patel1-0/+1
We are saving pointer to iommu DT node in of_iommu_set_ops() hence we should increment DT node ref count. Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Anup Patel <anup.patel@broadcom.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-08-03of: iommu: Silence misleading warningRobin Murphy1-3/+5
Printing "IOMMU is currently not supported for PCI" for every PCI device probed on a DT-based system proves to be both irritatingly noisy and confusing to users who have misinterpreted it to mean they can no longer use VFIO device assignment. Since configuring DMA masks for PCI devices via of_dma_configure() has not in fact changed anything with regard to IOMMUs there really is nothing to warn about here; shut it up. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-03-03of: iommu: Add ptr to OF node arg to of_iommu_configure()Murali Karicheri1-2/+8
of_iommu_configure() is called from of_dma_configure() to setup iommu ops using DT property. This API is currently used for platform devices for which DMA configuration (including IOMMU ops) may come from the device's parent. To extend this functionality for PCI devices, this API needs to take a parent node ptr as an argument instead of assuming device's parent. This is needed since for PCI, the DMA configuration may be defined in the DT node of the root bus bridge's parent device. Currently only dma-range is used for PCI and IOMMU is not supported. Return error if the device is PCI. Add "parent" parameter (a struct device_node *) to of_iommu_configure(). Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> (AMD Seattle) Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Rob Herring <robh+dt@kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> CC: Joerg Roedel <joro@8bytes.org> CC: Grant Likely <grant.likely@linaro.org> CC: Russell King <linux@arm.linux.org.uk> CC: Arnd Bergmann <arnd@arndb.de>
2014-12-05iommu: store DT-probed IOMMU data privatelyRobin Murphy1-0/+39
Since the data pointer in the DT node is public and may be overwritten by conflicting code, move the DT-probed IOMMU ops to a private list where they will be safe. Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> [will: added missing #include and missing ')'] Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-12-01iommu: provide helper function to configure an IOMMU for an of masterWill Deacon1-0/+33
The generic IOMMU device-tree bindings can be used to add arbitrary OF masters to an IOMMU with a compliant binding. This patch introduces of_iommu_configure, which does exactly that. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Joerg Roedel <jroedel@suse.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-12-01iommu: provide early initialisation hook for IOMMU driversWill Deacon1-0/+17
IOMMU drivers must be initialised before any of their upstream devices, otherwise the relevant iommu_ops won't be configured for the bus in question. To solve this, a number of IOMMU drivers use initcalls to initialise the driver before anything has a chance to be probed. Whilst this solves the immediate problem, it leaves the job of probing the IOMMU completely separate from the iommu_ops to configure the IOMMU, which are called on a per-bus basis and require the driver to figure out exactly which instance of the IOMMU is being requested. In particular, the add_device callback simply passes a struct device to the driver, which then has to parse firmware tables or probe buses to identify the relevant IOMMU instance. This patch takes the first step in addressing this problem by adding an early initialisation pass for IOMMU drivers, giving them the ability to store some per-instance data in their iommu_ops structure and store that in their of_node. This can later be used when parsing OF masters to identify the IOMMU instance in question. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Joerg Roedel <jroedel@suse.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-01-07iommu: add missing includeBrian Norris1-0/+1
Fix a warning in of_iommu.c: drivers/iommu/of_iommu.c:38:5: warning: no previous prototype for 'of_get_dma_window' [-Wmissing-prototypes] Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Hiroshi DOYU <hdoyu@nvidia.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2012-06-25iommu: Add DMA window parser, of_get_dma_window()Hiroshi Doyu1-0/+90
This code was based on: "arch/microblaze/kernel/prom_parse.c" "arch/powerpc/kernel/prom_parse.c" Can replace "of_parse_dma_window()" in the above. This supports different formats flexibly. "prefix" can be configured if any. "busno" and "index" are optionally specified. Set NULL and 0 if not used. Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>