summaryrefslogtreecommitdiff
path: root/drivers/iommu
AgeCommit message (Collapse)AuthorFilesLines
2018-02-22treewide/trivial: Remove ';;$' typo noiseIngo Molnar1-1/+1
On lkml suggestions were made to split up such trivial typo fixes into per subsystem patches: --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height) struct efi_uga_draw_protocol *uga = NULL, *first_uga; efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID; unsigned long nr_ugas; - u32 *handles = (u32 *)uga_handle;; + u32 *handles = (u32 *)uga_handle; efi_status_t status = EFI_INVALID_PARAMETER; int i; This patch is the result of the following script: $ sed -i 's/;;$/;/g' $(git grep -E ';;$' | grep "\.[ch]:" | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq) ... followed by manual review to make sure it's all good. Splitting this up is just crazy talk, let's get over with this and just do it. Reported-by: Pavel Machek <pavel@ucw.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-08Merge tag 'iommu-updates-v4.16' of ↵Linus Torvalds13-66/+77
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "This time there are not a lot of changes coming from the IOMMU side. That is partly because I returned from my parental leave late in the development process and probably partly because everyone was busy with Spectre and Meltdown mitigation work and didn't find the time for IOMMU work. So here are the few changes that queued up for this merge window: - 5-level page-table support for the Intel IOMMU. - error reporting improvements for the AMD IOMMU driver - additional DT bindings for ipmmu-vmsa (Renesas) - small fixes and cleanups" * tag 'iommu-updates-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Clean up of_iommu_init_fn iommu/ipmmu-vmsa: Remove redundant of_iommu_init_fn hook iommu/msm: Claim bus ops on probe iommu/vt-d: Enable 5-level paging mode in the PASID entry iommu/vt-d: Add a check for 5-level paging support iommu/vt-d: Add a check for 1GB page support iommu/vt-d: Enable upto 57 bits of domain address width iommu/vt-d: Use domain instead of cache fetching iommu/exynos: Don't unconditionally steal bus ops iommu/omap: Fix debugfs_create_*() usage iommu/vt-d: clean up pr_irq if request_threaded_irq fails iommu: Check the result of iommu_group_get() for NULL iommu/ipmmu-vmsa: Add r8a779(70|95) DT bindings iommu/ipmmu-vmsa: Add r8a7796 DT binding iommu/amd: Set the device table entry PPR bit for IOMMU V2 devices iommu/amd - Record more information about unknown events
2018-02-06Merge tag 'pci-v4.16-changes' of ↵Linus Torvalds3-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - skip AER driver error recovery callbacks for correctable errors reported via ACPI APEI, as we already do for errors reported via the native path (Tyler Baicar) - fix DPC shared interrupt handling (Alex Williamson) - print full DPC interrupt number (Keith Busch) - enable DPC only if AER is available (Keith Busch) - simplify DPC code (Bjorn Helgaas) - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn Helgaas) - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn Helgaas) - move ASPM internal interfaces out of public header (Bjorn Helgaas) - allow hot-removal of VGA devices (Mika Westerberg) - speed up unplug and shutdown by assuming Thunderbolt controllers don't support Command Completed events (Lukas Wunner) - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling, Jay Cornwall) - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes) - clean up PCI DMA interface usage (Christoph Hellwig) - remove PCI pool API (replaced with DMA pool) (Romain Perier) - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan Kaya) - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring) - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler) - remove warnings on sysfs mmap failure (Bjorn Helgaas) - quiet ROM validation messages (Alex Deucher) - remove redundant memory alloc failure messages (Markus Elfring) - fill in types for compile-time VGA and other I/O port resources (Bjorn Helgaas) - make "pci=pcie_scan_all" work for Root Ports as well as Downstream Ports to help AmigaOne X1000 (Bjorn Helgaas) - add SPDX tags to all PCI files (Bjorn Helgaas) - quirk Marvell 9128 DMA aliases (Alex Williamson) - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas) - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas Cassel) - use DMA API to get MSI address for DesignWare IP (Niklas Cassel) - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I) - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun) - add support for ARTPEC-7 SoC (Niklas Cassel) - add endpoint-mode support for ARTPEC (Niklas Cassel) - add Cadence PCIe host and endpoint controller driver (Cyrille Pitchen) - handle multiple INTx status bits being set in dra7xx (Vignesh R) - translate dra7xx hwirq range to fix INTD handling (Vignesh R) - remove deprecated Exynos PHY initialization code (Jaehoon Chung) - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu) - fix NULL pointer dereference in iProc BCMA driver (Ray Jui) - fix Keystone interrupt-controller-node lookup (Johan Hovold) - constify qcom driver structures (Julia Lawall) - rework Tegra config space mapping to increase space available for endpoints (Vidya Sagar) - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy) - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy) - add support for Global Fabric Manager Server (GFMS) event to Microsemi Switchtec switch driver (Logan Gunthorpe) - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao) * tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile PCI/DPC: Reformat DPC register definitions PCI/DPC: Add and use DPC Status register field definitions PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error() PCI/DPC: Remove unnecessary RP PIO register structs PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info() PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info() PCI/DPC: Make RP PIO log size check more generic PCI/DPC: Rename local "status" to "dpc_status" PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error() ...
2018-02-02Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-4/+120
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "A number of new drivers get added this time, along with many low-priority bugfixes. The most interesting changes by subsystem are: bus drivers: - Updates to the Broadcom bus interface driver to support newer SoC types - The TI OMAP sysc driver now supports updated DT bindings memory controllers: - A new driver for Tegra186 gets added - A new driver for the ti-emif sram, to allow relocating suspend/resume handlers there SoC specific: - A new driver for Qualcomm QMI, the interface to the modem on MSM SoCs - A new driver for power domains on the actions S700 SoC - A driver for the Xilinx Zynq VCU logicoreIP reset controllers: - A new driver for Amlogic Meson-AGX - various bug fixes tee subsystem: - A new user interface got added to enable asynchronous communication with the TEE supplicant. - A new method of using user space memory for communication with the TEE is added" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits) of: platform: fix OF node refcount leak soc: fsl: guts: Add a NULL check for devm_kasprintf() bus: ti-sysc: Fix smartreflex sysc mask psci: add CPU_IDLE dependency soc: xilinx: Fix Kconfig alignment soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu soc: bcm: brcmstb: Be multi-platform compatible soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms Revert "soc: brcmstb: Only register SoC device on STB platforms" bus: omap: add MODULE_LICENSE tags soc: brcmstb: Only register SoC device on STB platforms tee: shm: Potential NULL dereference calling tee_shm_register() soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver soc: xilinx: Create folder structure for soc specific drivers of: platform: populate /firmware/ node from of_platform_default_populate_init() soc: samsung: Add SPDX license identifiers soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe() tee: shm: don't put_page on null shm->pages ...
2018-02-01mm, mmu_notifier: annotate mmu notifiers with blockable invalidate callbacksDavid Rientjes2-0/+2
Commit 4d4bbd8526a8 ("mm, oom_reaper: skip mm structs with mmu notifiers") prevented the oom reaper from unmapping private anonymous memory with the oom reaper when the oom victim mm had mmu notifiers registered. The rationale is that doing mmu_notifier_invalidate_range_{start,end}() around the unmap_page_range(), which is needed, can block and the oom killer will stall forever waiting for the victim to exit, which may not be possible without reaping. That concern is real, but only true for mmu notifiers that have blockable invalidate_range_{start,end}() callbacks. This patch adds a "flags" field to mmu notifier ops that can set a bit to indicate that these callbacks do not block. The implementation is steered toward an expensive slowpath, such as after the oom reaper has grabbed mm->mmap_sem of a still alive oom victim. [rientjes@google.com: mmu_notifier_invalidate_range_end() can also call the invalidate_range() must not block, fix comment] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1801091339570.240101@chino.kir.corp.google.com [akpm@linux-foundation.org: make mm_has_blockable_invalidate_notifiers() return bool, use rwsem_is_locked()] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1712141329500.74052@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Dimitri Sivanich <sivanich@hpe.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Joerg Roedel <joro@8bytes.org> Cc: Doug Ledford <dledford@redhat.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-17Merge branches 'arm/renesas', 'arm/omap', 'arm/exynos', 'x86/amd', ↵Joerg Roedel14-72/+92
'x86/vt-d' and 'core' into next
2018-01-17iommu: Clean up of_iommu_init_fnRobin Murphy7-28/+12
Now that no more drivers rely on arbitrary early initialisation via an of_iommu_init_fn hook, let's clean up the redundant remnants. The IOMMU_OF_DECLARE() macro needs to remain for now, as the probe-deferral mechanism has no other nice way to detect built-in drivers before they have registered themselves, such that it can make the right decision. Reviewed-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-01-17iommu/ipmmu-vmsa: Remove redundant of_iommu_init_fn hookRobin Murphy1-12/+2
Having of_iommu_init() call ipmmu_init() via ipmmu_vmsa_iommu_of_setup() does nothing that the subsys_initcall wouldn't do slightly later anyway, since probe-deferral of masters means it is no longer critical to register the driver super-early. Clean it up. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-01-17iommu/msm: Claim bus ops on probeRobin Murphy1-13/+3
Since the MSM IOMMU driver now probes via DT exclusively rather than platform data, dependent masters should be deferred until the IOMMU itself is ready. Thus we can do away with the early initialisation hook to unconditionally claim the bus ops, and instead do that only once an IOMMU is actually probed. Furthermore, this should also make the driver safe for multiplatform kernels on non-MSM SoCs. Reviewed-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-01-17iommu/vt-d: Enable 5-level paging mode in the PASID entrySohil Mehta1-2/+13
If the CPU has support for 5-level paging enabled and the IOMMU also supports 5-level paging then enable the 5-level paging mode for first- level translations - used when SVM is enabled. Signed-off-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-01-17iommu/vt-d: Add a check for 5-level paging supportSohil Mehta1-0/+4
Add a check to verify IOMMU 5-level paging support. If the CPU supports supports 5-level paging but the IOMMU does not support it then disable SVM by not allocating PASID tables. Signed-off-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-01-17iommu/vt-d: Add a check for 1GB page supportSohil Mehta1-0/+4
Add a check to verify IOMMU 1GB page support. If the CPU supports 1GB pages but the IOMMU does not support it then disable SVM by not allocating PASID tables. Signed-off-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-01-17iommu/vt-d: Enable upto 57 bits of domain address widthSohil Mehta1-1/+1
Update the IOMMU default domain address width to 57 bits. This would enable the IOMMU to do upto 5-levels of paging for second level translations - IOVA translation requests without PASID. Even though the maximum supported address width is being increased to 57, __iommu_calculate_agaw() would set the actual supported address width to the maximum support available in IOMMU hardware. Signed-off-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-01-17iommu/vt-d: Use domain instead of cache fetchingPeter Xu1-2/+1
after commit a1ddcbe93010 ("iommu/vt-d: Pass dmar_domain directly into iommu_flush_iotlb_psi", 2015-08-12), we have domain pointer as parameter to iommu_flush_iotlb_psi(), so no need to fetch it from cache again. More importantly, a NULL reference pointer bug is reported on RHEL7 (and it can be reproduced on some old upstream kernels too, e.g., v4.13) by unplugging an 40g nic from a VM (hard to test unplug on real host, but it should be the same): https://bugzilla.redhat.com/show_bug.cgi?id=1531367 [ 24.391863] pciehp 0000:00:03.0:pcie004: Slot(0): Attention button pressed [ 24.393442] pciehp 0000:00:03.0:pcie004: Slot(0): Powering off due to button press [ 29.721068] i40evf 0000:01:00.0: Unable to send opcode 2 to PF, err I40E_ERR_QUEUE_EMPTY, aq_err OK [ 29.783557] iommu: Removing device 0000:01:00.0 from group 3 [ 29.784662] BUG: unable to handle kernel NULL pointer dereference at 0000000000000304 [ 29.785817] IP: iommu_flush_iotlb_psi+0xcf/0x120 [ 29.786486] PGD 0 [ 29.786487] P4D 0 [ 29.786812] [ 29.787390] Oops: 0000 [#1] SMP [ 29.787876] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_ng [ 29.795371] CPU: 0 PID: 156 Comm: kworker/0:2 Not tainted 4.13.0 #14 [ 29.796366] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.11.0-1.el7 04/01/2014 [ 29.797593] Workqueue: pciehp-0 pciehp_power_thread [ 29.798328] task: ffff94f5745b4a00 task.stack: ffffb326805ac000 [ 29.799178] RIP: 0010:iommu_flush_iotlb_psi+0xcf/0x120 [ 29.799919] RSP: 0018:ffffb326805afbd0 EFLAGS: 00010086 [ 29.800666] RAX: ffff94f5bc56e800 RBX: 0000000000000000 RCX: 0000000200000025 [ 29.801667] RDX: ffff94f5bc56e000 RSI: 0000000000000082 RDI: 0000000000000000 [ 29.802755] RBP: ffffb326805afbf8 R08: 0000000000000000 R09: ffff94f5bc86bbf0 [ 29.803772] R10: ffffb326805afba8 R11: 00000000000ffdc4 R12: ffff94f5bc86a400 [ 29.804789] R13: 0000000000000000 R14: 00000000ffdc4000 R15: 0000000000000000 [ 29.805792] FS: 0000000000000000(0000) GS:ffff94f5bfc00000(0000) knlGS:0000000000000000 [ 29.806923] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.807736] CR2: 0000000000000304 CR3: 000000003499d000 CR4: 00000000000006f0 [ 29.808747] Call Trace: [ 29.809156] flush_unmaps_timeout+0x126/0x1c0 [ 29.809800] domain_exit+0xd6/0x100 [ 29.810322] device_notifier+0x6b/0x70 [ 29.810902] notifier_call_chain+0x4a/0x70 [ 29.812822] __blocking_notifier_call_chain+0x47/0x60 [ 29.814499] blocking_notifier_call_chain+0x16/0x20 [ 29.816137] device_del+0x233/0x320 [ 29.817588] pci_remove_bus_device+0x6f/0x110 [ 29.819133] pci_stop_and_remove_bus_device+0x1a/0x20 [ 29.820817] pciehp_unconfigure_device+0x7a/0x1d0 [ 29.822434] pciehp_disable_slot+0x52/0xe0 [ 29.823931] pciehp_power_thread+0x8a/0xa0 [ 29.825411] process_one_work+0x18c/0x3a0 [ 29.826875] worker_thread+0x4e/0x3b0 [ 29.828263] kthread+0x109/0x140 [ 29.829564] ? process_one_work+0x3a0/0x3a0 [ 29.831081] ? kthread_park+0x60/0x60 [ 29.832464] ret_from_fork+0x25/0x30 [ 29.833794] Code: 85 ed 74 0b 5b 41 5c 41 5d 41 5e 41 5f 5d c3 49 8b 54 24 60 44 89 f8 0f b6 c4 48 8b 04 c2 48 85 c0 74 49 45 0f b6 ff 4a 8b 3c f8 <80> bf [ 29.838514] RIP: iommu_flush_iotlb_psi+0xcf/0x120 RSP: ffffb326805afbd0 [ 29.840362] CR2: 0000000000000304 [ 29.841716] ---[ end trace b10ec0d6900868d3 ]--- This patch fixes that problem if applied to v4.13 kernel. The bug does not exist on latest upstream kernel since it's fixed as a side effect of commit 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing", 2017-08-15). But IMHO it's still good to have this patch upstream. CC: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Fixes: a1ddcbe93010 ("iommu/vt-d: Pass dmar_domain directly into iommu_flush_iotlb_psi") Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-01-17iommu/exynos: Don't unconditionally steal bus opsRobin Murphy1-0/+7
Removing the early device registration hook overlooked the fact that it only ran conditionally on a compatible device being present in the DT. With exynos_iommu_init() now running as an unconditional initcall, problems arise on non-Exynos systems when other IOMMU drivers find themselves unable to install their ops on the platform bus, or at worst the Exynos ops get called with someone else's domain and all hell breaks loose. The global ops/cache setup could probably all now be triggered from the first IOMMU probe, as with dma_dev assigment, but for the time being the simplest fix is to resurrect the logic from commit a7b67cd5d9af ("iommu/exynos: Play nice in multi-platform builds") to explicitly check the DT for the presence of an Exynos IOMMU before trying anything. Fixes: 928055a01b3f ("iommu/exynos: Remove custom platform device registration code") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-01-17iommu/omap: Fix debugfs_create_*() usageGeert Uytterhoeven1-2/+2
When exposing data access through debugfs, the correct debugfs_create_*() functions must be used, depending on data type. Remove all casts from data pointers passed to debugfs_create_*() functions, as such casts prevent the compiler from flagging bugs. omap_iommu.nr_tlb_entries is "int", hence casting to "u8 *" exposes only a part of it. Fix this by using debugfs_create_u32() instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-01-15ia64: clean up swiotlb supportChristoph Hellwig1-1/+1
Move the few remaining bits of swiotlb glue towards their callers, and remove the pointless on ia64 swiotlb variable. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian König <christian.koenig@amd.com>
2018-01-12iommu/amd: Deprecate pci_get_bus_and_slot()Sinan Kaya3-6/+9
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as where a PCI device is present. This restricts the device drivers to be reused for other domain numbers. Getting ready to remove pci_get_bus_and_slot() function in favor of pci_get_domain_bus_and_slot(). Hard-code the domain number as 0 for the AMD IOMMU driver. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Reviewed-by: Gary R Hook <gary.hook@amd.com> Acked-by: Joerg Roedel <jroedel@suse.de>
2018-01-02iommu/arm-smmu-v3: Cope with duplicated Stream IDsRobin Murphy1-1/+8
For PCI devices behind an aliasing PCIe-to-PCI/X bridge, the bridge alias to DevFn 0.0 on the subordinate bus may match the original RID of the device, resulting in the same SID being present in the device's fwspec twice. This causes trouble later in arm_smmu_write_strtab_ent() when we wind up visiting the STE a second time and find it already live. Avoid the issue by giving arm_smmu_install_ste_for_dev() the cleverness to skip over duplicates. It seems mildly counterintuitive compared to preventing the duplicates from existing in the first place, but since the DT and ACPI probe paths build their fwspecs differently, this is actually the cleanest and most self-contained way to deal with it. Cc: <stable@vger.kernel.org> Fixes: 8f78515425da ("iommu/arm-smmu: Implement of_xlate() for SMMUv3") Reported-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com> Tested-by: Jayachandran C. <jnair@caviumnetworks.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-01-02iommu/arm-smmu-v3: Don't free page table ops twiceJean-Philippe Brucker1-3/+5
Kasan reports a double free when finalise_stage_fn fails: the io_pgtable ops are freed by arm_smmu_domain_finalise and then again by arm_smmu_domain_free. Prevent this by leaving pgtbl_ops empty on failure. Cc: <stable@vger.kernel.org> Fixes: 48ec83bcbcf5 ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-29genirq/irqdomain: Rename early argument of irq_domain_activate_irq()Thomas Gleixner2-2/+2
The 'early' argument of irq_domain_activate_irq() is actually used to denote reservation mode. To avoid confusion, rename it before abuse happens. No functional change. Fixes: 72491643469a ("genirq/irqdomain: Update irq_domain_ops.activate() signature") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexandru Chirvasitu <achirvasub@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Mikael Pettersson <mikpelinux@gmail.com> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@intel.com>, Cc: linux-media@vger.kernel.org
2017-12-21Merge tag 'tegra-for-4.16-memory' of ↵Arnd Bergmann1-4/+120
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers Pull "memory: tegra: Changes for v4.16-rc1" from Thierry Reding: The Tegra memory controller driver will now instruct the SMMU driver to create groups, which will make it easier for device drivers to share an IOMMU domain between multiple devices. Initial Tegra186 support is also added in a separate driver. * tag 'tegra-for-4.16-memory' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux: iommu/tegra-smmu: Fix return value check in tegra_smmu_group_get() iommu/tegra: Allow devices to be grouped memory: tegra: Create SMMU display groups memory: tegra: Add Tegra186 support dt-bindings: memory: Add Tegra186 support dt-bindings: misc: Add Tegra186 MISC registers bindings
2017-12-20iommu/tegra-smmu: Fix return value check in tegra_smmu_group_get()Wei Yongjun1-1/+1
In case of error, the function iommu_group_alloc() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 7f4c9176f760 ("iommu/tegra: Allow devices to be grouped") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-20iommu/vt-d: clean up pr_irq if request_threaded_irq failsJerry Snitselaar1-3/+6
It is unlikely request_threaded_irq will fail, but if it does for some reason we should clear iommu->pr_irq in the error path. Also intel_svm_finish_prq shouldn't try to clean up the page request interrupt if pr_irq is 0. Without these, if request_threaded_irq were to fail the following occurs: fail with no fixes: [ 0.683147] ------------[ cut here ]------------ [ 0.683148] NULL pointer, cannot free irq [ 0.683158] WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:1632 irq_domain_free_irqs+0x126/0x140 [ 0.683160] Modules linked in: [ 0.683163] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #3 [ 0.683165] Hardware name: /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017 [ 0.683168] RIP: 0010:irq_domain_free_irqs+0x126/0x140 [ 0.683169] RSP: 0000:ffffc90000037ce8 EFLAGS: 00010292 [ 0.683171] RAX: 000000000000001d RBX: ffff880276283c00 RCX: ffffffff81c5e5e8 [ 0.683172] RDX: 0000000000000001 RSI: 0000000000000096 RDI: 0000000000000246 [ 0.683174] RBP: ffff880276283c00 R08: 0000000000000000 R09: 000000000000023c [ 0.683175] R10: 0000000000000007 R11: 0000000000000000 R12: 000000000000007a [ 0.683176] R13: 0000000000000001 R14: 0000000000000000 R15: 0000010010000000 [ 0.683178] FS: 0000000000000000(0000) GS:ffff88027ec80000(0000) knlGS:0000000000000000 [ 0.683180] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.683181] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0 [ 0.683182] Call Trace: [ 0.683189] intel_svm_finish_prq+0x3c/0x60 [ 0.683191] free_dmar_iommu+0x1ac/0x1b0 [ 0.683195] init_dmars+0xaaa/0xaea [ 0.683200] ? klist_next+0x19/0xc0 [ 0.683203] ? pci_do_find_bus+0x50/0x50 [ 0.683205] ? pci_get_dev_by_id+0x52/0x70 [ 0.683208] intel_iommu_init+0x498/0x5c7 [ 0.683211] pci_iommu_init+0x13/0x3c [ 0.683214] ? e820__memblock_setup+0x61/0x61 [ 0.683217] do_one_initcall+0x4d/0x1a0 [ 0.683220] kernel_init_freeable+0x186/0x20e [ 0.683222] ? set_debug_rodata+0x11/0x11 [ 0.683225] ? rest_init+0xb0/0xb0 [ 0.683226] kernel_init+0xa/0xff [ 0.683229] ret_from_fork+0x1f/0x30 [ 0.683259] Code: 89 ee 44 89 e7 e8 3b e8 ff ff 5b 5d 44 89 e7 44 89 ee 41 5c 41 5d 41 5e e9 a8 84 ff ff 48 c7 c7 a8 71 a7 81 31 c0 e8 6a d3 f9 ff <0f> ff 5b 5d 41 5c 41 5d 41 5 e c3 0f 1f 44 00 00 66 2e 0f 1f 84 [ 0.683285] ---[ end trace f7650e42792627ca ]--- with iommu->pr_irq = 0, but no check in intel_svm_finish_prq: [ 0.669561] ------------[ cut here ]------------ [ 0.669563] Trying to free already-free IRQ 0 [ 0.669573] WARNING: CPU: 3 PID: 1 at kernel/irq/manage.c:1546 __free_irq+0xa4/0x2c0 [ 0.669574] Modules linked in: [ 0.669577] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #4 [ 0.669579] Hardware name: /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017 [ 0.669581] RIP: 0010:__free_irq+0xa4/0x2c0 [ 0.669582] RSP: 0000:ffffc90000037cc0 EFLAGS: 00010082 [ 0.669584] RAX: 0000000000000021 RBX: 0000000000000000 RCX: ffffffff81c5e5e8 [ 0.669585] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000046 [ 0.669587] RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000023c [ 0.669588] R10: 0000000000000007 R11: 0000000000000000 R12: ffff880276253960 [ 0.669589] R13: ffff8802762538a4 R14: ffff880276253800 R15: ffff880276283600 [ 0.669593] FS: 0000000000000000(0000) GS:ffff88027ed80000(0000) knlGS:0000000000000000 [ 0.669594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.669596] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0 [ 0.669602] Call Trace: [ 0.669616] free_irq+0x30/0x60 [ 0.669620] intel_svm_finish_prq+0x34/0x60 [ 0.669623] free_dmar_iommu+0x1ac/0x1b0 [ 0.669627] init_dmars+0xaaa/0xaea [ 0.669631] ? klist_next+0x19/0xc0 [ 0.669634] ? pci_do_find_bus+0x50/0x50 [ 0.669637] ? pci_get_dev_by_id+0x52/0x70 [ 0.669639] intel_iommu_init+0x498/0x5c7 [ 0.669642] pci_iommu_init+0x13/0x3c [ 0.669645] ? e820__memblock_setup+0x61/0x61 [ 0.669648] do_one_initcall+0x4d/0x1a0 [ 0.669651] kernel_init_freeable+0x186/0x20e [ 0.669653] ? set_debug_rodata+0x11/0x11 [ 0.669656] ? rest_init+0xb0/0xb0 [ 0.669658] kernel_init+0xa/0xff [ 0.669661] ret_from_fork+0x1f/0x30 [ 0.669662] Code: 7a 08 75 0e e9 c3 01 00 00 4c 39 7b 08 74 57 48 89 da 48 8b 5a 18 48 85 db 75 ee 89 ee 48 c7 c7 78 67 a7 81 31 c0 e8 4c 37 fa ff <0f> ff 48 8b 34 24 4c 89 ef e 8 0e 4c 68 00 49 8b 46 40 48 8b 80 [ 0.669688] ---[ end trace 58a470248700f2fc ]--- Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-12-20iommu: Check the result of iommu_group_get() for NULLJordan Crouse1-0/+5
The result of iommu_group_get() was being blindly used in both attach and detach which results in a dereference when trying to work with an unknown device. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-12-20iommu/amd: Set the device table entry PPR bit for IOMMU V2 devicesGary R Hook2-5/+17
The AMD IOMMU specification Rev 3.00 (December 2016) introduces a new Enhanced PPR Handling Support (EPHSup) bit in the MMIO register offset 0030h (IOMMU Extended Feature Register). When EPHSup=1, the IOMMU hardware requires the PPR bit of the device table entry (DTE) to be set in order to support PPR for a particular endpoint device. Please see https://support.amd.com/TechDocs/48882_IOMMU.pdf for this revision of the AMD IOMMU specification. Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-12-20iommu/amd - Record more information about unknown eventsGary R Hook1-1/+3
When an unknown type event occurs, the default information written to the syslog should dump raw event data. This could provide insight into the event that occurred. Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-12-15iommu/tegra: Allow devices to be groupedThierry Reding1-4/+120
Implement the ->device_group() and ->of_xlate() callbacks which are used in order to group devices. Each group can then share a single domain. This is implemented primarily in order to achieve the same semantics on Tegra210 and earlier as on Tegra186 where the Tegra SMMU was replaced by an ARM SMMU. Users of the IOMMU API can now use the same code to share domains between devices, whereas previously they used to attach each device individually. Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-06Merge tag 'iommu-v4.15-rc3' of git://github.com/awilliam/linux-vfioLinus Torvalds1-3/+5
Pull IOMMU fix from Alex Williamson: "Fix VT-d handling of scatterlists where sg->offset exceeds PAGE_SIZE" * tag 'iommu-v4.15-rc3' of git://github.com/awilliam/linux-vfio: iommu/vt-d: Fix scatterlist offset handling
2017-11-22treewide: setup_timer() -> timer_setup()Kees Cook1-4/+4
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-17iommu/vt-d: Fix scatterlist offset handlingRobin Murphy1-3/+5
The intel-iommu DMA ops fail to correctly handle scatterlists where sg->offset is greater than PAGE_SIZE - the IOVA allocation is computed appropriately based on the page-aligned portion of the offset, but the mapping is set up relative to sg->page, which means it fails to actually cover the whole buffer (and in the worst case doesn't cover it at all): (sg->dma_address + sg->dma_len) ----+ sg->dma_address ---------+ | iov_pfn------+ | | | | | v v v iova: a b c d e f |--------|--------|--------|--------|--------| <...calculated....> [_____mapped______] pfn: 0 1 2 3 4 5 |--------|--------|--------|--------|--------| ^ ^ ^ | | | sg->page ----+ | | sg->offset --------------+ | (sg->offset + sg->length) ----------+ As a result, the caller ends up overrunning the mapping into whatever lies beyond, which usually goes badly: [ 429.645492] DMAR: DRHD: handling fault status reg 2 [ 429.650847] DMAR: [DMA Write] Request device [02:00.4] fault addr f2682000 ... Whilst this is a fairly rare occurrence, it can happen from the result of intermediate scatterlist processing such as scatterwalk_ffwd() in the crypto layer. Whilst that particular site could be fixed up, it still seems worthwhile to bring intel-iommu in line with other DMA API implementations in handling this robustly. To that end, fix the intel_map_sg() path to line up the mapping correctly (in units of MM pages rather than VT-d pages to match the aligned_nrpages() calculation) regardless of the offset, and use sg_phys() consistently for clarity. Reported-by: Harsh Jain <Harsh@chelsio.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed by: Ashok Raj <ashok.raj@intel.com> Tested by: Jacob Pan <jacob.jun.pan@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-15Merge tag 'iommu-v4.15-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds17-615/+970
Pull IOMMU updates from Alex Williamson: "As Joerg mentioned[1], he's out on paternity leave through the end of the year and I'm filling in for him in the interim: - Enforce MSI multiple IRQ alignment in AMD IOMMU - VT-d PASID error handling fixes - Add r8a7795 IPMMU support - Manage runtime PM links on exynos at {add,remove}_device callbacks - Fix Mediatek driver name to avoid conflict - Add terminate support to qcom fault handler - 64-bit IOVA optimizations - Simplfy IOVA domain destruction, better use of rcache, and skip anchor nodes on copy - Convert to IOMMU TLB sync API in io-pgtable-arm{-v7s} - Drop command queue lock when waiting for CMD_SYNC completion on ARM SMMU implementations supporting MSI to cacheable memory - iomu-vmsa cleanup inspired by missed IOTLB sync callbacks - Fix sleeping lock with preemption disabled for RT - Dual MMU support for TI DRA7xx DSPs - Optional flush option on IOVA allocation avoiding overhead when caller can try other options [1] https://lkml.org/lkml/2017/10/22/72" * tag 'iommu-v4.15-rc1' of git://github.com/awilliam/linux-vfio: (54 commits) iommu/iova: Use raw_cpu_ptr() instead of get_cpu_ptr() for ->fq iommu/mediatek: Fix driver name iommu/ipmmu-vmsa: Hook up r8a7795 DT matching code iommu/ipmmu-vmsa: Allow two bit SL0 iommu/ipmmu-vmsa: Make IMBUSCTR setup optional iommu/ipmmu-vmsa: Write IMCTR twice iommu/ipmmu-vmsa: IPMMU device is 40-bit bus master iommu/ipmmu-vmsa: Make use of IOMMU_OF_DECLARE() iommu/ipmmu-vmsa: Enable multi context support iommu/ipmmu-vmsa: Add optional root device feature iommu/ipmmu-vmsa: Introduce features, break out alias iommu/ipmmu-vmsa: Unify ipmmu_ops iommu/ipmmu-vmsa: Clean up struct ipmmu_vmsa_iommu_priv iommu/ipmmu-vmsa: Simplify group allocation iommu/ipmmu-vmsa: Unify domain alloc/free iommu/ipmmu-vmsa: Fix return value check in ipmmu_find_group_dma() iommu/vt-d: Clear pasid table entry when memory unbound iommu/vt-d: Clear Page Request Overflow fault bit iommu/vt-d: Missing checks for pasid tables if allocation fails iommu/amd: Limit the IOVA page range to the specified addresses ...
2017-11-13Merge branches 'iommu/arm/smmu', 'iommu/updates', 'iommu/vt-d', ↵Alex Williamson20-559/+849
'iommu/ipmmu-vmsa' and 'iommu/iova' into iommu-next-20171113.0
2017-11-07Merge branch 'linus' into x86/apic, to resolve conflictsIngo Molnar7-5/+13
Conflicts: arch/x86/include/asm/x2apic.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-06iommu/iova: Use raw_cpu_ptr() instead of get_cpu_ptr() for ->fqSebastian Andrzej Siewior1-3/+1
get_cpu_ptr() disabled preemption and returns the ->fq object of the current CPU. raw_cpu_ptr() does the same except that it not disable preemption which means the scheduler can move it to another CPU after it obtained the per-CPU object. In this case this is not bad because the data structure itself is protected with a spin_lock. This change shouldn't matter however on RT it does because the sleeping lock can't be accessed with disabled preemption. Cc: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Reported-by: vinadhy@gmail.com Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-06iommu/mediatek: Fix driver nameMatthias Brugger1-1/+1
There exist two Mediatek iommu drivers for the two different generations of the device. But both drivers have the same name "mtk-iommu". This breaks the registration of the second driver: Error: Driver 'mtk-iommu' is already registered, aborting... Fix this by changing the name for first generation to "mtk-iommu-v1". Fixes: b17336c55d89 ("iommu/mediatek: add support for mtk iommu generation one HW") Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-06iommu/ipmmu-vmsa: Hook up r8a7795 DT matching codeMagnus Damm1-0/+29
Tie in r8a7795 features and update the IOMMU_OF_DECLARE compat string to include the updated compat string. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-06iommu/ipmmu-vmsa: Allow two bit SL0Magnus Damm1-1/+13
Introduce support for two bit SL0 bitfield in IMTTBCR by using a separate feature flag. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-06iommu/ipmmu-vmsa: Make IMBUSCTR setup optionalMagnus Damm1-3/+6
Introduce a feature to allow opt-out of setting up IMBUSCR. The default case is unchanged. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-06iommu/ipmmu-vmsa: Write IMCTR twiceMagnus Damm1-21/+35
Write IMCTR both in the root device and the leaf node. To allow access of IMCTR introduce the following function: - ipmmu_ctx_write_all() While at it also rename context functions: - ipmmu_ctx_read() -> ipmmu_ctx_read_root() - ipmmu_ctx_write() -> ipmmu_ctx_write_root() Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-06iommu/ipmmu-vmsa: IPMMU device is 40-bit bus masterMagnus Damm1-0/+1
The r8a7795 IPMMU supports 40-bit bus mastering. Both the coherent DMA mask and the streaming DMA mask are set to unlock the 40-bit address space for coherent allocations and streaming operations. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-06iommu/ipmmu-vmsa: Make use of IOMMU_OF_DECLARE()Magnus Damm1-9/+41
Hook up IOMMU_OF_DECLARE() support in case CONFIG_IOMMU_DMA is enabled. The only current supported case for 32-bit ARM is disabled, however for 64-bit ARM usage of OF is required. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-06iommu/ipmmu-vmsa: Enable multi context supportMagnus Damm1-8/+22
Add support for up to 8 contexts. Each context is mapped to one domain. One domain is assigned one or more slave devices. Contexts are allocated dynamically and slave devices are grouped together based on which IPMMU device they are connected to. This makes slave devices tied to the same IPMMU device share the same IOVA space. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-06iommu/ipmmu-vmsa: Add optional root device featureMagnus Damm1-17/+73
Add root device handling to the IPMMU driver by allowing certain DT compat strings to enable has_cache_leaf_nodes that in turn will support both root devices with interrupts and leaf devices that face the actual IPMMU consumer devices. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-06iommu/ipmmu-vmsa: Introduce features, break out aliasMagnus Damm1-7/+24
Introduce struct ipmmu_features to track various hardware and software implementation changes inside the driver for different kinds of IPMMU hardware. Add use_ns_alias_offset as a first example of a feature to control if the secure register bank offset should be used or not. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-06iommu/ipmmu-vmsa: Unify ipmmu_opsRobin Murphy1-50/+19
The remaining difference between the ARM-specific and iommu-dma ops is in the {add,remove}_device implementations, but even those have some overlap and duplication. By stubbing out the few arm_iommu_*() calls, we can get rid of the rest of the inline #ifdeffery to both simplify the code and improve build coverage. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-06iommu/ipmmu-vmsa: Clean up struct ipmmu_vmsa_iommu_privRobin Murphy1-24/+12
Now that the IPMMU instance pointer is the only thing remaining in the private data structure, we no longer need the extra level of indirection and can simply stash that directlty in the fwspec. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-06iommu/ipmmu-vmsa: Simplify group allocationRobin Murphy1-44/+9
We go through quite the merry dance in order to find masters behind the same IPMMU instance, so that we can ensure they are grouped together. None of which is really necessary, since the master's private data already points to the particular IPMMU it is associated with, and that IPMMU instance data is the perfect place to keep track of a per-instance group directly. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-06iommu/ipmmu-vmsa: Unify domain alloc/freeRobin Murphy1-41/+24
We have two implementations for ipmmu_ops->alloc depending on CONFIG_IOMMU_DMA, the difference being whether they accept the IOMMU_DOMAIN_DMA type or not. However, iommu_dma_get_cookie() is guaranteed to return an error when !CONFIG_IOMMU_DMA, so if ipmmu_domain_alloc_dma() was actually checking and handling the return value correctly, it would behave the same as ipmmu_domain_alloc() anyway. Similarly for freeing; iommu_put_dma_cookie() is robust by design. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-06iommu/ipmmu-vmsa: Fix return value check in ipmmu_find_group_dma()weiyongjun (A)1-1/+1
In case of error, the function iommu_group_get() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 3ae47292024f ("iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>