summaryrefslogtreecommitdiff
path: root/drivers/irqchip/irq-gic.c
AgeCommit message (Collapse)AuthorFilesLines
2023-02-22Merge tag 'arm64-upstream' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore - Include TPIDR2 in the signal context and add the corresponding kselftests - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64 - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values) - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone - Further arm64 sysreg conversion and some fixes - arm64 kselftest fixes and improvements - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation - Pseudo-NMI code generation optimisations - Minor fixes for SME and TPIDR2 handling - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits) arm64: fix .idmap.text assertion for large kernels kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context arm64: kprobes: Drop ID map text from kprobes blacklist perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 arm64/sme: Fix __finalise_el2 SMEver check drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable arm64/signal: Only read new data when parsing the ZT context arm64/signal: Only read new data when parsing the ZA context arm64/signal: Only read new data when parsing the SVE context arm64/signal: Avoid rereading context frame sizes arm64/signal: Make interface for restore_fpsimd_context() consistent arm64/signal: Remove redundant size validation from parse_user_sigframe() arm64/signal: Don't redundantly verify FPSIMD magic arm64/cpufeature: Use helper macros to specify hwcaps arm64/cpufeature: Always use symbolic name for feature value in hwcaps arm64/sysreg: Initial unsigned annotations for ID registers arm64/sysreg: Initial annotation of signed ID registers ...
2023-01-31arm64: rename ARM64_HAS_SYSREG_GIC_CPUIF to ARM64_HAS_GIC_CPUIF_SYSREGSMark Rutland1-1/+1
Subsequent patches will add more GIC-related cpucaps. When we do so, it would be nice to give them a consistent HAS_GIC_* prefix. In preparation for doing so, this patch renames the existing ARM64_HAS_SYSREG_GIC_CPUIF cap to ARM64_HAS_GIC_CPUIF_SYSREGS. The 'CPUIF_SYSREGS' suffix is chosen so that this will be ordered ahead of other ARM64_HAS_GIC_* definitions in subsequent patches. The cpucaps file was hand-modified; all other changes were scripted with: find . -type f -name '*.[chS]' -print0 | \ xargs -0 sed -i 's/ARM64_HAS_SYSREG_GIC_CPUIF/ARM64_HAS_GIC_CPUIF_SYSREGS/' There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20230130145429.903791-2-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-01-11irqchip: Use irq_domain_alloc_irqs()Johan Hovold1-3/+1
Use the irq_domain_alloc_irqs() wrapper instead of the full __irq_domain_alloc_irqs() interface, which was only intended for some legacy (x86) use cases. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20221213140844.15470-2-johan+linaro@kernel.org
2022-12-07Merge tag 'irqchip-6.2' of ↵Thomas Gleixner1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates frim Marc Zyngier: - More APCI fixes and improvements for the LoongArch architecture, adding support for the HTVEC irqchip, suspend-resume, and some PCI INTx workarounds - Initial DT support for LoongArch. I'm not even kidding. - Support for the MTK CIRQv2, a minor deviation from the original version - Error handling fixes for wpcm450, GIC... - BE detection for a FSL controller - Declare the Sifive PLIC as wake-up agnostic - Simplify fishing out the device data for the ST irqchip - Mark some data structures as __initconst in the apple-aic driver - Switch over from strtobool to kstrtobool - COMPILE_TEST fixes
2022-12-05genirq/irqdomain: Rename irq_domain::dev to irq_domain:: Pm_devThomas Gleixner1-2/+2
irq_domain::dev is a misnomer as it's usually the rule that a device pointer points to something which is directly related to the instance. irq_domain::dev can point to some other device for power management to ensure that this underlying device is not powered down when an interrupt is allocated. The upcoming per device MSI domains really require a pointer to the device which instantiated the irq domain and not to some random other device which is required for power management down the chain. Rename irq_domain::dev to irq_domain::pm_dev and fixup the few sites which use that pointer. Conversion was done with the help of coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221124230313.574541683@linutronix.de
2022-11-28irqchip/gic: Use kstrtobool() instead of strtobool()Christophe JAILLET1-1/+2
strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file (<linux/kstrtox.h>) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/755c4083122071bb27aa8ed5d98156a07bb63a39.1667336095.git.christophe.jaillet@wanadoo.fr
2022-07-20APCI: irq: Add support for multiple GSI domainsMarc Zyngier1-6/+12
In an unfortunate departure from the ACPI spec, the LoongArch architecture split its GSI space across multiple interrupt controllers. In order to be able to reuse the core code and prevent architectures from reinventing an already square wheel, offer the arch code the ability to register a dispatcher function that will return the domain fwnode for a given GSI. The ARM GIC drivers are updated to support this (with a single domain, as intended). Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Tested-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/1658314292-35346-3-git-send-email-lvjianmin@loongson.cn
2022-05-04irqchip/gic: Improved warning about incorrect typeFlorian Fainelli1-2/+4
Issue the warning for interrupt lines that have an incorrect interrupt type and also print the hardware interrupt number to facilitate the resolution of such problems. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220308201117.3870678-1-f.fainelli@gmail.com
2022-04-05irqchip/gic, gic-v3: Prevent GSI to SGI translationsAndre Przywara1-0/+6
At the moment the GIC IRQ domain translation routine happily converts ACPI table GSI numbers below 16 to GIC SGIs (Software Generated Interrupts aka IPIs). On the Devicetree side we explicitly forbid this translation, actually the function will never return HWIRQs below 16 when using a DT based domain translation. We expect SGIs to be handled in the first part of the function, and any further occurrence should be treated as a firmware bug, so add a check and print to report this explicitly and avoid lengthy debug sessions. Fixes: 64b499d8df40 ("irqchip/gic-v3: Configure SGIs as standard interrupts") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220404110842.2882446-1-andre.przywara@arm.com
2022-02-15irqchip/gic: Switch to dynamic chip name outputMarc Zyngier1-48/+54
The last dynamic aspect of the GIC's irq_chip structure is the name that is associated to it. Move the output of that name to the relevant callback, which allows us to do a bit of cleanup and mark the structures const. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220209162607.1118325-4-maz@kernel.org
2022-02-09irqchip/gic: Move PM device over to irq domainMarc Zyngier1-6/+6
Move the reference to the GIC device over to the irq domain. This allows for some localised cleanup. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl> Link: https://lore.kernel.org/r/20220201120310.878267-3-maz@kernel.org
2021-10-26irq: remove handle_domain_{irq,nmi}()Mark Rutland1-1/+1
Now that entry code handles IRQ entry (including setting the IRQ regs) before calling irqchip code, irqchip code can safely call generic_handle_domain_irq(), and there's no functional reason for it to call handle_domain_irq(). Let's cement this split of responsibility and remove handle_domain_irq() entirely, updating irqchip drivers to call generic_handle_domain_irq(). For consistency, handle_domain_nmi() is similarly removed and replaced with a generic_handle_domain_nmi() function which also does not perform any entry logic. Previously handle_domain_{irq,nmi}() had a WARN_ON() which would fire when they were called in an inappropriate context. So that we can identify similar issues going forward, similar WARN_ON_ONCE() logic is added to the generic_handle_*() functions, and comments are updated for clarity and consistency. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2021-09-22irqchip/gic: Work around broken Renesas integrationMarc Zyngier1-1/+51
Geert reported that the GIC driver locks up on a Renesas system since 005c34ae4b44f085 ("irqchip/gic: Atomically update affinity") fixed the driver to use writeb_relaxed() instead of writel_relaxed(). As it turns out, the interconnect used on this system mandates 32bit wide accesses for all MMIO transactions, even if the GIC architecture specifically mandates for some registers to be byte accessible. Gahhh... Work around the issue by crudly detecting the offending system, and falling back to an inefficient RMW+lock implementation. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/CAMuHMdV+Ev47K5NO8XHsanSq5YRMCHn2gWAQyV-q2LpJVy9HiQ@mail.gmail.com
2021-06-29Merge tag 'irq-core-2021-06-29' of ↵Linus Torvalds1-8/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Core changes: - Cleanup and simplification of common code to invoke the low level interrupt flow handlers when this invocation requires irqdomain resolution. Add the necessary core infrastructure. - Provide a proper interface for modular PMU drivers to set the interrupt affinity. - Add a request flag which allows to exclude interrupts from spurious interrupt detection. Useful especially for IPI handlers which always return IRQ_HANDLED which turns the spurious interrupt detection into a pointless waste of CPU cycles. Driver changes: - Bulk convert interrupt chip drivers to the new irqdomain low level flow handler invocation mechanism. - Add device tree bindings for the Renesas R-Car M3-W+ SoC - Enable modular build of the Qualcomm PDC driver - The usual small fixes and improvements" * tag 'irq-core-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits) dt-bindings: interrupt-controller: arm,gic-v3: Describe GICv3 optional properties irqchip: gic-pm: Remove redundant error log of clock bulk irqchip/sun4i: Remove unnecessary oom message irqchip/irq-imx-gpcv2: Remove unnecessary oom message irqchip/imgpdc: Remove unnecessary oom message irqchip/gic-v3-its: Remove unnecessary oom message irqchip/gic-v2m: Remove unnecessary oom message irqchip/exynos-combiner: Remove unnecessary oom message irqchip: Bulk conversion to generic_handle_domain_irq() genirq: Move non-irqdomain handle_domain_irq() handling into ARM's handle_IRQ() genirq: Add generic_handle_domain_irq() helper irqchip/nvic: Convert from handle_IRQ() to handle_domain_irq() irqdesc: Fix __handle_domain_irq() comment genirq: Use irq_resolve_mapping() to implement __handle_domain_irq() and co irqdomain: Introduce irq_resolve_mapping() irqdomain: Protect the linear revmap with RCU irqdomain: Cache irq_data instead of a virq number in the revmap irqdomain: Use struct_size() helper when allocating irqdomain irqdomain: Make normal and nomap irqdomains exclusive powerpc: Move the use of irq_domain_add_nomap() behind a config option ...
2021-06-10irqchip: Bulk conversion to generic_handle_domain_irq()Marc Zyngier1-8/+5
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-06-01irqchip/gic: Split vGIC probing information from the GIC codeMarc Zyngier1-3/+3
The vGIC advertising code is unsurprisingly very much tied to the GIC implementations. However, we are about to extend the support to lesser implementations. Let's dissociate the vgic registration from the GIC code and move it into KVM, where it makes a bit more sense. This also allows us to mark the gic_kvm_info structures as __initdata. Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-12-11irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()Valentin Schneider1-7/+1
handle_percpu_devid_fasteoi_ipi() states: * The biggest difference with the IRQ version is that the interrupt is * EOIed early, as the IPI could result in a context switch, and we need to * make sure the IPI can fire again All that can actually happen scheduler-wise within the handling of an IPI is the raising of TIF_NEED_RESCHED (and / or folding thereof into preempt_count); see scheduler_ipi() or sched_ttwu_pending() for instance. Said flag / preempt_count is evaluated some time later before returning to whatever context was interrupted, and this gates a call to preempt_schedule_irq() (arm64_preempt_schedule_irq() in arm64). Per the above, SGI's do not need a different handler than PPI's, so make them use the same (handle_percpu_devid_irq). Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201109094121.29975-2-valentin.schneider@arm.com
2020-12-11irqchip/gic: Spelling s/REturn/Return/Geert Uytterhoeven1-1/+1
Fix a capitalization typo. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201209101504.2206941-1-geert+renesas@glider.be
2020-09-17Merge remote-tracking branch 'origin/irq/gic-retrigger' into irq/irqchip-nextMarc Zyngier1-1/+11
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic: Cleanup Franken-GIC handlingMarc Zyngier1-29/+12
Introduce a static key identifying Samsung's unique creation, allowing to replace the indirect call to compute the base addresses with a simple test on the static key. Faster, cheaper, negative diffstat. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic: Configure SGIs as standard interruptsMarc Zyngier1-41/+87
Change the way we deal with GIC SGIs by turning them into proper IRQs, and calling into the arch code to register the interrupt range instead of a callback. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic: Refactor SMP configurationMarc Zyngier1-36/+40
As we are about to change quite a lot of the SMP support code, let's start by moving it around so that it minimizes the amount of #ifdefery. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-06irqchip/gic-v2, v3: Prevent SW resends entirelyValentin Schneider1-1/+5
The GIC irqchips can now use a HW resend when a retrigger is invoked by check_irq_resend(). However, should the HW resend fail, check_irq_resend() will still attempt to trigger a SW resend, which is still a bad idea for the GICs. Prevent this from happening by setting IRQD_HANDLE_ENFORCE_IRQCTX on all GIC IRQs. Technically per-cpu IRQs do not need this, as their flow handlers never set IRQS_PENDING, but this aligns all IRQs wrt context enforcement: this also forces all GIC IRQ handling to happen in IRQ context (as defined by in_irq()). Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200730170321.31228-3-valentin.schneider@arm.com
2020-09-06irqchip/gic-v2, v3: Implement irq_chip->irq_retrigger()Valentin Schneider1-0/+6
While digging around IRQCHIP_EOI_IF_HANDLED and irq/resend.c, it has come to my attention that the IRQ resend situation seems a bit precarious for the GIC(s). When marking an IRQ with IRQS_PENDING, handle_fasteoi_irq() will bail out and issue an irq_eoi(). Should the IRQ in question be re-enabled, check_irq_resend() will trigger a SW resend, which will go through the flow handler again and issue *another* irq_eoi() on the *same* IRQ activation. This is something the GIC spec clearly describes as a bad idea: any EOI must match a previous ACK. Implement irq_chip.irq_retrigger() for the GIC chips by setting the GIC pending bit of the relevant IRQ. After being called by check_irq_resend(), this will eventually trigger a *new* interrupt which we will handle as usual. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200730170321.31228-2-valentin.schneider@arm.com
2020-08-05Merge tag 'irq-core-2020-08-04' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The usual boring updates from the interrupt subsystem: - Infrastructure to allow building irqchip drivers as modules - Consolidation of irqchip ACPI probing - Removal of the EOI-preflow interrupt handler which was required for SPARC support and became obsolete after SPARC was converted to use sparse interrupts. - Cleanups, fixes and improvements all over the place" * tag 'irq-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits) irqchip/loongson-pch-pic: Fix the misused irq flow handler irqchip/loongson-htvec: Support 8 groups of HT vectors irqchip/loongson-liointc: Fix misuse of gc->mask_cache dt-bindings: interrupt-controller: Update Loongson HTVEC description irqchip/imx-intmux: Fix irqdata regs save in imx_intmux_runtime_suspend() irqchip/imx-intmux: Implement intmux runtime power management irqchip/gic-v4.1: Use GFP_ATOMIC flag in allocate_vpe_l1_table() irqchip: Fix IRQCHIP_PLATFORM_DRIVER_* compilation by including module.h irqchip/stm32-exti: Map direct event to irq parent irqchip/mtk-cirq: Convert to a platform driver irqchip/mtk-sysirq: Convert to a platform driver irqchip/qcom-pdc: Switch to using IRQCHIP_PLATFORM_DRIVER helper macros irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros irqchip: irq-bcm2836.h: drop a duplicated word irqchip/gic-v4.1: Ensure accessing the correct RD when writing INVALLR irqchip/irq-bcm7038-l1: Guard uses of cpu_logical_map irqchip/gic-v3: Remove unused register definition irqchip/qcom-pdc: Allow QCOM_PDC to be loadable as a permanent module genirq: Export irq_chip_retrigger_hierarchy and irq_chip_set_vcpu_affinity_parent irqdomain: Export irq_domain_update_bus_token ...
2020-06-27drivers/irqchip: Use new macro ACPI_DECLARE_SUBTABLE_PROBE_ENTRYOscar Carter1-1/+1
In an effort to enable -Wcast-function-type in the top-level Makefile to support Control Flow Integrity builds, there are the need to remove all the function callback casts. To do this, modify the IRQCHIP_ACPI_DECLARE macro to use the new defined macro ACPI_DECLARE_SUBTABLE_PROBE_ENTRY instead of the macro ACPI_DECLARE_PROBE_ENTRY. This is necessary to be able to initialize the the acpi_probe_entry struct using the probe_subtbl field instead of the probe_table field and avoid function cast mismatches. Also, modify the prototype of the functions used by the invocation of the IRQCHIP_ACPI_DECLARE macro to match all the parameters. Co-developed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20200530143430.5203-3-oscar.carter@gmx.com
2020-06-21irqchip/gic: Atomically update affinityMarc Zyngier1-11/+3
The GIC driver uses a RMW sequence to update the affinity, and relies on the gic_lock_irqsave/gic_unlock_irqrestore sequences to update it atomically. But these sequences only expand into anything meaningful if the BL_SWITCHER option is selected, which almost never happens. It also turns out that using a RMW and locks is just as silly, as the GIC distributor supports byte accesses for the GICD_TARGETRn registers, which when used make the update atomic by definition. Drop the terminally broken code and replace it by a byte write. Fixes: 04c8b0f82c7d ("irqchip/gic: Make locking a BL_SWITCHER only feature") Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-05-25irqchip/gic-v2, v3: Drop extra IRQ_NOAUTOEN setting for (E)PPIsValentin Schneider1-1/+0
(E)PPIs are per-CPU interrupts, so we want each CPU to go and enable them via enable_percpu_irq(); this also means we want IRQ_NOAUTOEN for them as the autoenable would lead to calling irq_enable() instead of the more appropriate irq_percpu_enable(). Calling irq_set_percpu_devid() is enough to get just that since it trickles down to irq_set_percpu_devid_flags(), which gives us IRQ_NOAUTOEN (and a few others). Setting IRQ_NOAUTOEN *again* right after this call is just redundant, so don't do it. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200521223500.834-1-valentin.schneider@arm.com
2019-08-20irqchip/gic: Prepare for more than 16 PPIsMarc Zyngier1-1/+1
GICv3.1 allows up to 80 PPIs (16 legaci PPIs and 64 Extended PPIs), meaning we can't just leave the old 16 hardcoded everywhere. We also need to add the infrastructure to discover the number of PPIs on a per redistributor basis, although we still pretend there is only 16 of them for now. No functional change. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic: Rework gic_configure_irq to take the full ICFGR baseMarc Zyngier1-1/+9
gic_configure_irq is currently passed the (re)distributor address, to which it applies an a fixed offset to get to the configuration registers. This offset is constant across all GICs, or rather it was until to v3.1... An easy way out is for the individual drivers to pass the base address of the configuration register for the considered interrupt. At the same time, move part of the error handling back to the individual drivers, as things are about to change on that front. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-07irqchip/gic: Register the distributor's PA instead of its VA in fwnodeMarc Zyngier1-1/+1
Do not expose the distributor's VA (it appears in debugfs). Instead, record the PA, which at least can be used to precisely identify the associated irqchip and domain. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04acpi: Create subtable parsing infrastructureKeith Busch1-2/+2
Parsing entries in an ACPI table had assumed a generic header structure. There is no standard ACPI header, though, so less common layouts with different field sizes required custom parsers to go through their subtable entry list. Create the infrastructure for adding different table types so parsing the entries array may be more reused for all ACPI system tables and the common code doesn't need to be duplicated. Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Tested-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-11irqchip/gic: Drop support for secondary GIC in non-DT systemsMarc Zyngier1-29/+16
We do not have any in-tree platform with this pathological setup, and only a single system (Cavium's cns3xxx) isn't DT aware. Let's drop the secondary GIC support for now, until we remove the above horror altogether. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18genirq: Fix various typos in commentsIngo Molnar1-3/+3
Go over the IRQ subsystem source code (including irqchip drivers) and fix common typos in comments. No change in functionality intended. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org
2018-03-28irqchip/gic: Update supports_deactivate static key to modern apiDavidlohr Bueso1-11/+11
No changes in semantics -- key init is true; replace static_key_slow_dec with static_branch_disable static_key_true with static_branch_likely The first is because we never actually do any couterpart incs, thus there is really no reference counting semantics going on. Use the more proper static_branch_disable() construct. Also added a '_key' suffix to supports_deactivate, for better self documentation. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-16irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONEMarc Zyngier1-0/+5
There is a huge number of broken device trees out there. Just grepping through the tree for the use of IRQ_TYPE_NONE in conjunction with the GIC is scary. People just don't realise that IRQ_TYPE_NONE just doesn't exist, and you just get whatever junk was there before. So let's make them aware of the issue. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-14irqchip/gic-v2: Reset APRn registers at boot timeMarc Zyngier1-6/+11
Booting a crash kernel while in an interrupt handler is likely to leave the Active Priority Registers with some state that is not relevant to the new kernel, and is likely to lead to erratic behaviours such as interrupts not firing as their priority is already active. As a sanity measure, wipe the APRs clean on startup. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-17Merge tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-2/+4
Pull KVM updates from Radim Krčmář: "First batch of KVM changes for 4.15 Common: - Python 3 support in kvm_stat - Accounting of slabs to kmemcg ARM: - Optimized arch timer handling for KVM/ARM - Improvements to the VGIC ITS code and introduction of an ITS reset ioctl - Unification of the 32-bit fault injection logic - More exact external abort matching logic PPC: - Support for running hashed page table (HPT) MMU mode on a host that is using the radix MMU mode; single threaded mode on POWER 9 is added as a pre-requisite - Resolution of merge conflicts with the last second 4.14 HPT fixes - Fixes and cleanups s390: - Some initial preparation patches for exitless interrupts and crypto - New capability for AIS migration - Fixes x86: - Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs, and after-reset state - Refined dependencies for VMX features - Fixes for nested SMI injection - A lot of cleanups" * tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits) KVM: s390: provide a capability for AIS state migration KVM: s390: clear_io_irq() requests are not expected for adapter interrupts KVM: s390: abstract conversion between isc and enum irq_types KVM: s390: vsie: use common code functions for pinning KVM: s390: SIE considerations for AP Queue virtualization KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup KVM: PPC: Book3S HV: Cosmetic post-merge cleanups KVM: arm/arm64: fix the incompatible matching for external abort KVM: arm/arm64: Unify 32bit fault injection KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared KVM: arm/arm64: vgic-its: New helper functions to free the caches KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device arm/arm64: KVM: Load the timer state when enabling the timer KVM: arm/arm64: Rework kvm_timer_should_fire KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit KVM: arm/arm64: Move phys_timer_emulate function KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps ...
2017-11-06KVM: arm/arm64: Check that system supports split eoi/deactivateChristoffer Dall1-2/+4
Some systems without proper firmware and/or hardware description data don't support the split EOI and deactivate operation. On such systems, we cannot leave the physical interrupt active after the timer handler on the host has run, so we cannot support KVM with an in-kernel GIC with the timer changes we are about to introduce. This patch makes sure that trying to initialize the KVM GIC code will fail on such systems. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-11-02irqchip/gic: Deal with broken firmware exposing only 4kB of GICv2 CPU interfaceMarc Zyngier1-9/+62
There is a lot of broken firmware out there that don't really expose the information the kernel requires when it comes with dealing with GICv2: (1) Firmware that only describes the first 4kB of GICv2 (2) Firmware that describe 128kB of CPU interface, while the usable portion of the address space is between 60 and 68kB So far, we only deal with (2). But we have platforms exhibiting behaviour (1), resulting in two sub-cases: (a) The GIC is occupying 8kB, as required by the GICv2 architecture (b) It is actually spread 128kB, and this is likely to be a version of (2) This patch tries to work around both (a) and (b) by poking at the outside of the described memory region, and try to work out what is actually there. This is of course unsafe, and should only be enabled if there is no way to otherwise fix the DT provided by the firmware (we provide a "irqchip.gicv2_force_probe" option to that effect). Note that for the time being, we restrict ourselves to GICv2 implementations provided by ARM, since there I have no knowledge of an alternative implementations. This could be relaxed if such an implementation comes to light on a broken platform. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-09-04Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The interrupt subsystem delivers this time: - Refactoring of the GIC-V3 driver to prepare for the GIC-V4 support - Initial GIC-V4 support - Consolidation of the FSL MSI support - Utilize the effective affinity interface in various ARM irqchip drivers - Yet another interrupt chip driver (UniPhier AIDET) - Bulk conversion of the irq chip driver to use %pOF - The usual small fixes and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits) irqchip/ls-scfg-msi: Add MSI affinity support irqchip/ls-scfg-msi: Add LS1043a v1.1 MSI support irqchip/ls-scfg-msi: Add LS1046a MSI support arm64: dts: ls1046a: Add MSI dts node arm64: dts: ls1043a: Share all MSIs arm: dts: ls1021a: Share all MSIs arm64: dts: ls1043a: Fix typo of MSI compatible string arm: dts: ls1021a: Fix typo of MSI compatible string irqchip/ls-scfg-msi: Fix typo of MSI compatible strings irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_mask irqchip/mmp: Make mmp_intc_conf const irqchip/gic: Make irq_chip const irqchip/gic-v3: Advertise GICv4 support to KVM irqchip/gic-v4: Enable low-level GICv4 operations irqchip/gic-v4: Add some basic documentation irqchip/gic-v4: Add VLPI configuration interface irqchip/gic-v4: Add VPE command interface irqchip/gic-v4: Add per-VM VPE domain creation irqchip/gic-v3-its: Set implementation defined bit to enable VLPIs irqchip/gic-v3-its: Allow doorbell interrupts to be injected/cleared ...
2017-08-31Merge tag 'irqchip-4.14' of ↵Thomas Gleixner1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for 4.14 from Marc Zyngier: - irqchip-specific part of the monster GICv4 series - new UniPhier AIDET irqchip driver - new variants of some Freescale MSI widget - blanket removal of of_node->full_name in printk - random collection of fixes
2017-08-31irqchip/gic: Make irq_chip constBhumika Goyal1-1/+1
Make this const as it is only used in a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-18irqchip/gic: Report that effective affinity is a single targetMarc Zyngier1-0/+3
The GIC driver only targets a single CPU at a time, even if the notional affinity is wider. Let's inform the core code about this. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Chris Zankel <chris@zankel.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: http://lkml.kernel.org/r/20170818083925.10108-4-marc.zyngier@arm.com
2017-08-02irqchip/gic: Ensure we have an ISB between ack and ->handle_irqWill Deacon1-2/+5
Devices that expose their interrupt status registers via system registers (e.g. Statistical profiling, CPU PMU, DynamIQ PMU, arch timer, vgic (although unused by Linux), ...) rely on a context synchronising operation on the CPU to ensure that the updated status register is visible to the CPU when handling the interrupt. This usually happens as a result of taking the IRQ exception in the first place, but there are two race scenarios where this isn't the case. For example, let's say we have two peripherals (X and Y), where Y uses a system register for its interrupt status. Case 1: 1. CPU takes an IRQ exception as a result of X raising an interrupt 2. Y then raises its interrupt line, but the update to its system register is not yet visible to the CPU 3. The GIC decides to expose Y's interrupt number first in the Ack register 4. The CPU runs the IRQ handler for Y, but the status register is stale Case 2: 1. CPU takes an IRQ exception as a result of X raising an interrupt 2. CPU reads the interrupt number for X from the Ack register and runs its IRQ handler 3. Y raises its interrupt line and the Ack register is updated, but again, the update to its system register is not yet visible to the CPU. 4. Since the GIC drivers poll the Ack register, we read Y's interrupt number and run its handler without a context synchronisation operation, therefore seeing the stale register value. In either case, we run the risk of missing an IRQ. This patch solves the problem by ensuring that we execute an ISB in the GIC drivers prior to invoking the interrupt handler. This is already the case for GICv3 and EOIMode 1 (the usual case for the host). Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-07-04irqchip/gic-v2: Report failures in gic_irq_domain_allocSuzuki K Poulose1-2/+5
If the GIC cannot map an IRQ via irq_domain_ops->alloc(), it doesn't return an error code. This can cause a problem with drivers, where it thinks it has successfully got an IRQ for the device, but requesting the same ends up failure with -ENOSYS (as the IRQ's chip is not set). Fixes: commit 9a1091ef0017c ("irqchip: gic: Support hierarchy irq domain.") Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-12-25cpu/hotplug: Cleanup state namesThomas Gleixner1-1/+1
When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-20irqchip/gic: Add missing \n to CPU IF adjustment messageMarc Zyngier1-1/+1
It really looks bad without a newline. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12irqchip/gic: Mark gic_init_physaddr() staticBaoyou Xie1-1/+1
We get 1 warning when building kernel with W=1: drivers/irqchip/irq-gic.c:917:13: warning: no previous prototype for 'gic_init_physaddr' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>