summaryrefslogtreecommitdiff
path: root/drivers/leds/leds-lp5523.c
AgeCommit message (Collapse)AuthorFilesLines
2014-05-08leds: lp55xx: add DT bindings for LP55231Daniel Mack1-1/+2
The TI55231 appears to be fully compatible to the 5523 model from National Semicondutor. This patch just adds DT bindings for it. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-02-27drivers/leds: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Cc: Bryan Wu <cooloney@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: linux-leds@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-01-29Merge branch 'for-next' of ↵Linus Torvalds1-3/+17
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem update from Bryan Wu: "Basically this cycle is mostly cleanup for LED subsystem" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: s3c24xx: Remove hardware.h inclusion leds: replace list_for_each with list_for_each_entry leds: kirkwood: Cleanup in header files leds: pwm: Remove a warning on non-DT platforms leds: leds-pwm: fix duty time overflow. leds: leds-mc13783: Remove unneeded mc13xxx_{un}lock leds: leds-mc13783: Remove duplicate field in platform data drivers: leds: leds-tca6507: check CONFIG_GPIOLIB whether defined for 'gpio_base' leds: lp5523: Support LED MUX configuration on running a pattern leds: lp5521/5523: Fix multiple engine usage bug LEDS: tca6507 - fix up some comments. LEDS: tca6507: add device-tree support for GPIO configuration. LEDS: tca6507 - fix bugs in parsing of device-tree configuration.
2014-01-28leds: lp5521/5523: Fix multiple engine usage bugMilo Kim1-3/+17
Whenever the engine is loaded by the user-application, the operation mode is reset first. But it has a problem in case of multiple engine used because previous engine settings are cleared. The driver should update not whole 8bits but each engine bit by masking. On the other hands, whole engines should be reset when the driver is unloaded and on initializing the LP5523 driver. So, new functions are used for this handling - lp5521/5523_stop_all_engines(). Cc: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-01-23Merge branch 'for-linus' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science stuff from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) neighbour.h: fix comment sched: Fix warning on make htmldocs caused by wait.h slab: struct kmem_cache is protected by slab_mutex doc: Fix typo in USB Gadget Documentation of/Kconfig: Spelling s/one/once/ mkregtable: Fix sscanf handling lp5523, lp8501: comment improvements thermal: rcar: comment spelling treewide: fix comments and printk msgs IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart() Documentation: update /proc/uptime field description Documentation: Fix size parameter for snprintf arm: fix comment header and macro name asm-generic: uaccess: Spelling s/a ny/any/ mtd: onenand: fix comment header doc: driver-model/platform.txt: fix a typo drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text doc: Fix typo (acces_process_vm -> access_process_vm) treewide: Fix typos in printk drivers/gpu/drm/qxl/Kconfig: reformat the help text ...
2014-01-11leds: lp5521/5523: Remove duplicate mutexMilo Kim1-8/+4
It can be a problem when a pattern is loaded via the firmware interface. LP55xx common driver has already locked the mutex in 'lp55xx_firmware_loaded()'. So it should be deleted. On the other hand, locks are required in store_engine_load() on updating program memory. Reported-by: Pali Rohár <pali.rohar@gmail.com> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com> Cc: <stable@vger.kernel.org>
2014-01-10lp5523, lp8501: comment improvementsPavel Machek1-1/+9
Add some comments that are not obvious from first look at the driver to lp5523, fix typo in lp8501. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-22leds: Include linux/of.h headerSachin Kamat1-0/+1
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-08-27leds: lp5523: remove unnecessary writing commandsMilo Kim1-11/+3
This patch reduces the number of programming commands. (Count of sending commands) Old code: 32 + program size (32 counts for clearing program memory) New code: 32 Pattern buffer is initialized to 0 in this function. Just update new program data and remaining buffers are filled with 0. So it's needless to clear whole area. Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-08-27leds: lp5523: restore legacy device attributesMilo Kim1-4/+223
git commit db6eaf8388a413a5ee1b4547ce78506b9c6456b0 (leds-lp5523: use generic firmware interface) causes an application conflict. This interface should be maintained for compatibility. Restored device attributes are 'engineN_mode', 'engineN_load' and 'engineN_leds'. (N = 1, 2 or 3) A 'selftest' attribute macro is replaced with LP55xx common macro. Those are accessed when a LED pattern is run by an application. Use a mutex in lp5523_update_program_memory() : This function is called when an user-application writes a 'engineN_load' file or pattern data is loaded from generic firmware interface. So, writing program memory should be protected. If an error occurs on accessing this area, just it returns as -EINVAL quickly. This error code is exact same as old driver function, lp5523_do_store_load() because it should be kept for an user-application compatibility. Even the driver is changed, we can use the application without re-compiling sources. Reported-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-08-27leds: lp5523: LED MUX configuration on initializingMilo Kim1-1/+69
LED MUX start and stop address should be updated in the program memory on LP5523 initialization. LED pattern doesn't work without additional MUX address configuration. This handling is done by new function, lp5523_init_program_engine(). Eventually, it's called during device initialization, lp5523_post_init_device(). This is a conflict after git commit 632418bf65503405df3f9a6a1616f5a95f91db85 (leds-lp5523: clean up lp5523_configure()). So it should be fixed. Cc: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-08-27leds: lp5523: make separate API for loading engineMilo Kim1-4/+10
lp5523_load_engine() It is called whenever the operation mode is changed to 'load'. It is used for simple operation mode change. It will be used when engine mode and LED selection is updated in later patch. lp5523_load_engine_and_select_page() Change the operation mode to 'load' and select program page number. This is used for programming a LED pattern at a time. So load_engine() is replaced with new API, load_engine_and_select_page() in lp5523_firmware_loaded(). Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-08-27leds: use dev_get_platdata()Jingoo Han1-2/+2
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-06-21leds: lp5523: Properly setup of_device_id tableAxel Lin1-1/+10
Don't mix of_device_id entry in i2c_device_id table. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-06-21leds: lp55xx: add support for Device Tree bindingsLinus Walleij1-5/+14
This patch allows the lp5521 driver to be successfully probed and initialised when Device Tree support is enabled. Based on a patch by Gabriel Fernandez, rewritten in accordance with review feedback. Cc: Gabriel Fernandez <gabriel.fernandez@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp5521/5523: add author and copyright descriptionMilo(Woogyom) Kim1-0/+3
Now LP5521 and LP5523 drivers are based on new lp55xx structure. So the author and copyrights are updated. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: clean up headersMilo(Woogyom) Kim1-13/+6
Remove unused headers and sort them alphabetically Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: clean up definitionsMilo(Woogyom) Kim1-47/+9
Remove unused definitions and change hex values to capital letters Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: clean up unused data and functionsMilo(Woogyom) Kim1-19/+0
Old data structures and I2C function are not used any more. Each driver uses the lp55xx common data and functions. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: clean up _remove()Milo(Woogyom) Kim1-17/+2
Replace lp5521/5523_unregister_sysfs() with lp55xx_unregister_sysfs(). On unloading the driver, running engines should be stopped. Use explicit driver function, lp5521/5523_stop_engine(). Unused functions are removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: code refactoring on selftest functionMilo(Woogyom) Kim1-33/+20
LP5521 and LP5523 have a selftest function which is run via the sysfs. Use lp55xx driver data and R/W functions rather than lp5521/5523 private data and functions. Additionally, if-statements are changed for code simplicity. Unused functions, lp5521/5523_read() are removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: use common device attribute driver functionMilo(Woogyom) Kim1-16/+7
lp5521/5523_register_sysfs() are replaced with lp55xx common driver function, lp55xx_register_sysfs(). Chip specific device attributes are configurable using 'dev_attr_group'. Error condition name is changed: use specific error condition, 'err_register_sysfs' rather than unclear name, 'fail2'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp5523: use generic firmware interfaceMilo(Woogyom) Kim1-346/+157
LP55xx common driver provides generic firmware interface for running a LED pattern. LP5521 and LP5523 have many device attributes for running patterns. This patch cleans up those complex code. Removed device attributes: engine1_mode engine2_mode engine3_mode engine1_load engine2_load engine3_load engine1_leds engine2_leds engine3_leds All device attributes and functions are replaced with two callback functions, 'firmware_cb' and 'run_engine'. New engine functions: lp5523_load/stop/run_engine(), lp5523_update_program_memory() and lp5523_wait_opmode_done() Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: use lp55xx_unregister_leds()Milo(Woogyom) Kim1-23/+2
To unregister led class devices and sysfs attributes, LP5521 and LP5523 have each driver function. This patch makes both drivers simple using common driver function, lp55xx_unregister_leds(). And some unused variables are removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: provide common LED current settingMilo(Woogyom) Kim1-61/+8
LED current is configurable via the sysfs. Max current is a read-only attribute. These attributes code can be shared in lp55xx common driver. Device attributes: 'led_current' and 'max_current' move to lp55xx common driver Replaced functions: show_max_current() => lp55xx_show_max_current() show_current() => lp55xx_show_current() store_current() => lp55xx_store_current() LED setting function: set_led_current() Current registers are device specific, so configurable function is added in each driver. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: use lp55xx_set_brightness()Milo(Woogyom) Kim1-19/+4
lp5521_set_brightness() and lp5523_set_brightness() are replaced with common function, lp55xx_set_brightness(). This function is invoked when the brightness of each LED channel is updated. LP5521 and LP5523 have different register address for the brightness control, so this work is done by chip specific brightness_work_fn(). lp5521/5523_led_brightness_work(): use lp55xx_led and lp55xx_chip data structure. use lp55xx write function. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: use lp55xx_init_led() common functionMilo(Woogyom) Kim1-55/+7
lp5521_init_led() and lp5523_init_led() are replaced with one common function, lp55xx_init_led(). Max channels is configurable, so it's used in lp55xx_init_led(). 'LP5523_LEDS' are changed to 'LP5523_MAX_LEDS'. lp55xx_set_brightness, lp55xx_led_attributes: skeleton Will be filled in next patches. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: use lp55xx common led registration functionMilo(Woogyom) Kim1-42/+3
LED class devices are registered in lp5521_register_leds() and lp5523_register_leds(). Two separate functions are merged into consolidated lp55xx function, lp55xx_register_leds(). Error handling fix: Unregistering LEDS are handled in lp55xx_register_leds() when LED registration failure occurs. So each driver error handler is changed to 'err_register_leds' Chip dependency: 'brightness_work_fn' and 'set_led_current' To make the structure abstract, both functions are configured in each driver. Those functions should be done by each driver because register control is chip-dependant work. lp55xx_init_led: skeleton Will be filled in next patch Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: use lp55xx common deinit functionMilo(Woogyom) Kim1-12/+4
Two separate de-init functions are merged into one common function. And it is used in err_post_init of lp55xx_init_device(). Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: clean up init functionMilo(Woogyom) Kim1-44/+2
lp5521/5523_init_device() are replaced with lp55xx common function, lp55xx_init_device(). Error handler in init_device: deinit function are matched with 'err_post_init' section in lp55xx_init_device(). Remove LP5523 engine intialization code: Engine functionality is not mandatory but optional. Moreover engine initialization is done internally with device reset command. Therefore, this code is unnecessary. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: use lp55xx common init function - post intMilo(Woogyom) Kim1-7/+9
LP5521/5523 chip configuration is replaced with lp55xx common function, lp55xx_post_init_device(). Name change: lp5521/5523_configure() to lp5521/5523_post_init_device() These are called in init function. Register access function Argument type is changed from 'i2c_client' to 'lp55xx_chip'. Use exported R/W functions of lp55xx common driver. Temporary variables in lp5521/5523_init_device() These functions will be removed but temporary variables are needed for blocking build warnings - incompatible pointer. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: use lp55xx common init function - detectMilo(Woogyom) Kim1-22/+4
LP5521/5523 chip detection functions are replaced with lp55xx common function, lp55xx_detect_device(). Chip dependent address and values are configurable in each driver. In init function, chip detection is executed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: use lp55xx common init function - resetMilo(Woogyom) Kim1-13/+10
LP5521/5523 reset device functions are moved to lp55xx common driver. Value of register address and value are chip dependent. Those are configured in each driver. In init function, reset command is executed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: use lp55xx common init function - platform dataMilo(Woogyom) Kim1-14/+0
LP5521/5523 platform data functions are moved to lp55xx common driver. New init function, lp55xx_init_device() is created. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp5523: clean up lp5523_configure()Milo(Woogyom) Kim1-58/+9
This patch is a preceding step for making common lp55xx init function. Return code: Do not use 'OR' arithmetic for the result. If some error occurs, just return it. Remove engine verification code: To check whether internal engine works or not, many lines of code are executed. However, this job is unnecessary during the chip initialization because the engine usage is not mandatory but optional function. LED engines are enabled when specific LED pattern is loaded. Therefore, this verification code is removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: use common lp55xx data structure in _probe()Milo(Woogyom) Kim1-14/+22
LP5521 and LP5523 data structures have common features. Use common lp55xx data structures rather than chip specific data. Legacy code in probe is replaced with this new data structures. lp55xx_chip : Common data between lp5521_chip and lp5523_chip lp55xx_led : Common LED structure between lp5521_led and lp5523_led lp55xx_platform_data : Common platform data between lp5521_platform_data and lp5523_platform_data Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: replace name of data structureMilo(Woogyom) Kim1-19/+19
Change the name of chip data structure and platform data. This patch is a preceding step for cleaning up lp5521/5523 probe and remove. These data will be replaced with new lp55xx common data structures in next patch. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: do chip specific configuration on device initMilo(Woogyom) Kim1-7/+19
Chip specific function is configured when the device is initialized. So _configure() is moved to each device init function. If chip configuration gets failed, the device is de-initialized in each _init_device(), not probe(). For compile error fix, function type declarations are added. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: add device reset function in lp5521/5523Milo(Woogyom) Kim1-1/+9
Use explicit each driver function rather than raw command. These function will be merged into the lp55xx common driver. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: clean up deinit leds in lp5521/5523Milo(Woogyom) Kim1-9/+12
To make LED unregistration code simple, new function, _unregister_leds() is added in each driver. This patch is a preceding step for lp55xx common driver architecture. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: clean up init leds in lp5521/5523Milo(Woogyom) Kim1-29/+44
To make LED initialization code simple, new function, _register_leds() is added at each driver. This patch is a preceding step for lp55xx common driver architecture. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: clean up deinit_device() in lp5521/5523Milo(Woogyom) Kim1-8/+12
Device de-initialization code is moved to _deinit_device() at each driver. This patch is a preceding step for lp55xx common driver architecture. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-07leds-lp55xx: clean up init_device() in lp5521/5523Milo(Woogyom) Kim1-19/+28
To make _probe() simple, device initialization code is moved to _init_device() at each driver. This patch is a preceding step for lp55xx common driver architecture. leds-lp5521: When 'lp5521_init_device()' gets failed, error handling should be 'fail1' rather than 'fail2'. fail1: releasing platform resource and return code fail2: releasing allocated LED devices with handling 'fail1' The 'lp5521_init_device()' is called before creating LED devices. Thus, 'goto fail1' is proper error handler of this function. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-12-16Merge branch 'for-next' of ↵Linus Torvalds1-5/+19
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem update from Bryan Wu. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (47 commits) leds: leds-lp5521: return an error code on error in probe() leds: leds-clevo-mail: Use pr_* instead of printks leds: leds-rb532: Fix checkpatch errors leds: led-triggers: Fix checkpatch warnings leds: ledtrig-backlight: Fix checkpatch error leds: leds-wrap: Use <linux/io.h> instead of <asm/io.h> leds: leds-wm8350: Use dev_err instead of printk leds: leds-pwm: Fix checkpatch warning leds: leds-pca955x: Use dev_info instead of printk leds: leds-net48xx: Use linux/io.h instead of asm/io.h leds: leds-lt3593: Fix checkpatch warnings leds: leds-gpio: Use dev_info instead of printk leds: leds-da903x: Fix checkpatch error and warnings leds: leds-bd2802: Fix checkpatch warnings leds: leds-adp5520: Fix checkpatch warnings leds: led-class: Fix checkpatch warning leds: leds-ns2: use devm_gpio_request_one leds: leds-lt3593: use devm_gpio_request_one leds: leds-gpio: use devm_gpio_request_one leds: lp3944: Fix return value ...
2012-11-29leds: remove use of __devinitBill Pemberton1-2/+2
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jan-Simon Moeller <jansimon.moeller@gmx.de> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-27leds: lp5523: Fix return valueSachin Kamat1-1/+1
Return the value obtained from i2c_smbus_read_byte_data() instead of -EIO. Silences the following smatch warning: drivers/leds/leds-lp5523.c:174 lp5523_read() info: why not propagate 'ret' from i2c_smbus_read_byte_data() instead of -5? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-27leds: leds-lp5523: replace strict_strtoul() with kstrtoul()Jingoo Han1-1/+1
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-27leds: leds-lp5523: fix build warningsJingoo Han1-3/+17
This patch fixes build warnings as below: drivers/leds/leds-lp5523.c: In function 'lp5523_selftest': drivers/leds/leds-lp5523.c:496:18: warning: 'adc' may be used uninitialized in this function [-Wuninitialized] drivers/leds/leds-lp5523.c:471:5: warning: 'vdd' may be used uninitialized in this function [-Wuninitialized] drivers/leds/leds-lp5523.c: In function 'lp5523_probe': drivers/leds/leds-lp5523.c:252:9: warning: 'status' may be used uninitialized in this function [-Wuninitialized] drivers/leds/leds-lp5523.c:201:5: note: 'status' was declared here If lp5523_read() returns an error, problems will happen. Thus, when lp5523_read() returns an error, it should be handled. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-09-13leds-lp5523: Fix riskiness of the page faultKim, Milo1-0/+1
The last attribute should be terminated as NULL because any member of attribute structure is accessed while adding the sysfs file. If not, invalid address may cause the page fault problem. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-13leds-lp5523: turn off the LED engines on unloading the driverKim, Milo1-0/+3
The LP5523 has 3 engines which are used for running LED patterns. These engines should be off while unloading the driver. Obviously, LP5523 platform data are used for releasing the resource such like enable()/release_resource(), but these are not mandatory. Therefore this patch is required without the platform data dependency. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>