summaryrefslogtreecommitdiff
path: root/drivers/leds
AgeCommit message (Collapse)AuthorFilesLines
2016-01-17Merge tag 'gpio-v4.5-1' of ↵Linus Torvalds2-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for v4.5. Notably there are big refactorings mostly by myself, aimed at getting the gpio_chip into a shape that makes me believe I can proceed to preserve state for a proper userspace ABI (character device) that has already been proposed once, but resulted in the feedback that I need to go back and restructure stuff. So I've been restructuring stuff. On the way I ran into brokenness (return code from the get_value() callback) and had to fix it. Also, refactored generic GPIO to be simpler. Some of that is still waiting to trickle down from the subsystems all over the kernel that provide random gpio_chips, I've touched every single GPIO driver in the kernel now, oh man I didn't know I was responsible for so much... Apart from that we're churning along as usual. I took some effort to test and retest so it should merge nicely and we shook out a couple of bugs in -next. Infrastructural changes: - In struct gpio_chip, rename the .dev node to .parent to better reflect the fact that this is not the GPIO struct device abstraction. We will add that soon so this would be totallt confusing. - It was noted that the driver .get_value() callbacks was sometimes reporting negative -ERR values to the gpiolib core, expecting them to be propagated to consumer gpiod_get_value() and gpio_get_value() calls. This was not happening, so as there was a mess of drivers returning negative errors and some returning "anything else than zero" to indicate that a line was active. As some would have bit 31 set to indicate "line active" it clashed with negative error codes. This is fixed by the largeish series clamping values in all drivers with !!value to [0,1] and then augmenting the code to propagate error codes to consumers. (Includes some ACKed patches in other subsystems.) - Add a void *data pointer to struct gpio_chip. The container_of() design pattern is indeed very nice, but we want to reform the struct gpio_chip to be a non-volative, stateless business, and keep states internal to the gpiolib to be able to hold on to the state when adding a proper userspace ABI (character device) further down the road. To achieve this, drivers need a handle at the internal state that is not dependent on their struct gpio_chip() so we add gpiochip_add_data() and gpiochip_get_data() following the pattern of many other subsystems. All the "use gpiochip data pointer" patches transforms drivers to this scheme. - The Generic GPIO chip header has been merged into the general <linux/gpio/driver.h> header, and the custom header for that removed. Instead of having a separate mm_gpio_chip struct for these generic drivers, merge that into struct gpio_chip, simplifying the code and removing the need for separate and confusing includes. Misc improvements: - Stabilize the way GPIOs are looked up from the ACPI legacy specification. - Incremental driver features for PXA, PCA953X, Lantiq (patches from the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48 New drivers: - Add a GPIO chip to the ALSA SoC AC97 driver. - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but the branch is merged here too to account for infrastructural changes). - The sx150x driver now supports the sx1502" * tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits) gpio: generic: make bgpio_pdata always visible gpiolib: fix chip order in gpio list gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs() gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs() gpio: brcmstb: Allow building driver for BMIPS_GENERIC gpio: brcmstb: Set endian flags for big-endian MIPS gpio: moxart: fix build regression gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs() leds: pca9532: use gpiochip data pointer leds: tca6507: use gpiochip data pointer hid: cp2112: use gpiochip data pointer bcma: gpio: use gpiochip data pointer avr32: gpio: use gpiochip data pointer video: fbdev: via: use gpiochip data pointer gpio: pch: Optimize pch_gpio_get() Revert "pinctrl: lantiq: Implement gpio_chip.to_irq" pinctrl: nsp-gpio: use gpiochip data pointer pinctrl: vt8500-wmt: use gpiochip data pointer pinctrl: exynos5440: use gpiochip data pointer pinctrl: at91-pio4: use gpiochip data pointer ...
2016-01-07leds: pca9532: use gpiochip data pointerLinus Walleij1-4/+4
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: linux-leds@vger.kernel.org Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-07leds: tca6507: use gpiochip data pointerLinus Walleij1-2/+2
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: linux-leds@vger.kernel.org Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-04leds: add HAS_IOMEM dependency to LEDS_BCM6328/LEDS_BCM6358Vegard Nossum1-0/+2
Ran into this on UML: drivers/built-in.o: In function `bcm6328_leds_probe': drivers/leds/leds-bcm6328.c:340: undefined reference to `devm_ioremap_resource' drivers/built-in.o: In function `bcm6358_leds_probe': drivers/leds/leds-bcm6358.c:173: undefined reference to `devm_ioremap_resource' collect2: error: ld returned 1 exit status devm_ioremap_resource() is defined only when HAS_IOMEM is selected. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: linux-leds@vger.kernel.org Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: core: add managed version of led_trigger_registerHeiner Kallweit1-0/+28
Complementing devm_led_classdev_register add a managed version of led_trigger_register. I omit a managed version of led_classdev_unregister as the equivalent devm_led_classdev_unregister isn't used in the kernel as of today. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: bcm6358: remove unneeded busy status checkÁlvaro Fernández Rojas1-3/+0
The busy status checking isn't needed while reading initial LED status. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: bcm6328: improve blink supportÁlvaro Fernández Rojas1-5/+15
BCM6328 controller has a margin of 20ms per blink step, which means that we can only set it to 20, 40, 60 ... 1260 ms (0x3f * 20ms). However, when checking if delay_on == delay_off, we were not considering the case when the user had set delay_on=20 and delay_off=21, since this will cause the driver to fallback to software blinking. This update fixes this issue and improves blink steps by rounding them in a more sensible way. Now 30-49ms is rounded to 40 ms, and previous behaviour implied 40-59ms being rounded to 40 ms. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: bcm6358: merge bcm6358_led_mode and bcm6358_led_setÁlvaro Fernández Rojas1-14/+6
bcm6358_led_mode is now only called by bcm6358_led_set, so merge both in one single function. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: bcm6328: simplify duplicated unlock in bcm6328_blink_setÁlvaro Fernández Rojas1-5/+5
Instead of duplicating the unlock we can store the return value and use a single unlock before returning that value, which simplifies the code. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: bcm6358: add little endian supportÁlvaro Fernández Rojas1-0/+8
This adds little endian support while keeping big endian support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: bcm6328: add little endian supportÁlvaro Fernández Rojas1-0/+8
This adds little endian support while keeping big endian support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: bcm6358: remove unneded lock when checking initial LED statusÁlvaro Fernández Rojas1-3/+0
This lock isn't really needed, since we're only reading the register and changes made to other LEDs aren't relevant. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: bcm6358: Use bcm6358_led_set() in order to get rid of the lockÁlvaro Fernández Rojas1-1/+2
Replaces bcm6358_led_mode with bcm6358_led_set so we don't need to handle the lock. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: bcm6328: remove unneded lock when checking initial LEDÁlvaro Fernández Rojas1-3/+0
This lock isn't really needed, since we're only reading the register and changes made to other LEDs aren't relevant. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: bcm6328: code cleaningÁlvaro Fernández Rojas1-4/+4
- Remove double whitespace - Add missing brackets - Add spinlock info Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: syscon: Make the driver explicitly non-modularPaul Gortmaker1-15/+3
The Kconfig currently controlling compilation of this code is: drivers/leds/Kconfig:config LEDS_SYSCON drivers/leds/Kconfig: bool "LED support for LEDs on system controllers" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Cc: Richard Purdie <rpurdie@rpsys.net> Cc: linux-leds@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: ledtrig-ide-disk: Make the driver explicitly non-modularPaul Gortmaker1-13/+1
The Kconfig for this driver is currently: config LEDS_TRIGGER_IDE_DISK bool "LED IDE Disk Trigger" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Bryan Wu <cooloney@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: linux-leds@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: ledtrig-cpu: Make the driver explicitly non-modularPaul Gortmaker1-25/+1
The Kconfig for this driver is currently: config LEDS_TRIGGER_CPU bool "LED CPU Trigger" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Bryan Wu <cooloney@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: linux-leds@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: sunfire: Use platform_register/unregister_drivers()Thierry Reding1-16/+7
These new helpers simplify implementing multi-driver modules and properly handle failure to register one driver by unregistering all previously registered drivers. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: max77693: Add missing of_node_putJacek Anaszewski1-0/+1
Each break out of the for_each_available_child_of_node loop requires of_node_put(). This patch adds missing of_node_put() when loop breaks on conflicting values of led-sources DT property. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Cc: Rob Herring <robh@kernel.org> Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
2016-01-04leds: aat1290: Add missing of_node_putJacek Anaszewski1-4/+5
The refcount of device_node increases after of_get_next_available_child() is called. Make sure it is decremented also in case of DT parsing error. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Cc: Rob Herring <robh@kernel.org> Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
2016-01-04leds: powernv: Implement brightness_set_blocking opJacek Anaszewski1-6/+10
Since brightness setting can sleep for this driver, implement brightness_set_blocking op, instead of brightness_set. It makes this driver compatible with LED triggers. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Cc: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
2016-01-04leds: ipaq-micro: Implement brightness_set_blocking opJacek Anaszewski1-3/+3
Since brightness setting can sleep for this driver, implement brightness_set_blocking op, instead of brightness_set. It makes this driver compatible with LED triggers. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-04leds: powernv: removing NULL checkSaurabh Sengar1-2/+0
No need to explicitly check for pointer to be null, of_prop_next_string anyways returns NULL, if passed pointer is NULL and hence loop will continue. Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com> Acked-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: bcm6328: Swap LED ON and OFF definitionsSimon Arlott1-6/+6
The values of BCM6328_LED_MODE_ON and BCM6328_LED_MODE_OFF were named for active low LEDs. These should be swapped so that they are named for the default case of active high LEDs. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: bcm6328: Reuse bcm6328_led_set() instead of copying its functionalitySimon Arlott1-6/+2
When ensuring a consistent initial LED state in bcm6328_led (as they may be blinking instead of on/off), the LED register is set using an inverted copy of bcm6328_led_set(). To avoid further errors relating to active low handling, call this function directly instead. As bcm6328_led_set() acquires the same spinlock again when updating the register, it is called after unlocking. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: ns2: Remove work queueJacek Anaszewski1-18/+13
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Tested-by: Simon Guinot <simon.guinot@sequanux.org>
2016-01-04leds: pwm: fix driver description and make license match the headerUwe Kleine-König1-2/+2
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: turn off the LED and wait for completion on unregistering LED class deviceMilo Kim1-2/+3
Workqueue, 'set_brightness_work' is used for scheduling brightness control. This workqueue is canceled when the LED class device is unregistered. Currently, LED subsystem handles like below. cancel_work_sync(&led_cdev->set_brightness_work) led_set_brightness(led_cdev, LED_OFF) However, this could be a problem. Workqueue is going to be canceled but LED device needs to be off. The worst case is null pointer access due to scheduling a workqueue. LED module is loaded. LED driver private data is allocated by using devm_zalloc(). LED module is unloaded. led_classdev_unregister() is called. cancel_work_sync() led_set_brightness(led_cdev, LED_OFF) schedule_work() if LED driver uses brightness_set_blocking() In the meantime, driver private data will be freed. ..scheduling.. brightness_set_blocking() callback is invoked. For the brightness control, LED driver tries to access private data but resource is removed! To avoid this problem, LED subsystem should turn off the brightness first and wait for completion. led_set_brightness(led_cdev, LED_OFF) flush_work(&led_cdev->set_brightness_work) It guarantees that LED driver turns off the brightness prior to resource management. Cc: linux-leds@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: flash: Remove checking for state < 1 in flash_strobe_store()Jacek Anaszewski1-1/+1
Strobe state variable is declared as unsigned long, remove the check for values less than zero then. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Reported-by: David Binderman <dcb314@hotmail.com>
2016-01-04leds: ktd2692: Add missing of_node_putIngi Kim1-3/+6
The refcount of device_node increases after of_node_get() is called. So, a break out of the loop requires of_node_put(). This patch adds missing of_node_put() when loop breaks. Signed-off-by: Ingi Kim <ingi2.kim@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: call led_pwm_set() in leds-pwm to enforce default LED_OFFMarkus Hofstaetter1-0/+1
Some PWMs are disabled by default or the default pin setting does not match the LED_OFF state (e.g., active-low leds). Hence, the driver may end up reporting 0 brightness, but the leds are actually on using full brightness, because it never enforces its default configuration. So enforce it by calling led_pwm_set() after successfully registering the device. Tested on a Phytec phyFLEX i.MX6Q board based on kernel v3.19.5. Signed-off-by: Markus Hofstaetter <markus.hofstaetter@ait.ac.at> Tested-by: Markus Hofstaetter <markus.hofstaetter@ait.ac.at> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: triggers: oneshot: fix module license specificationUwe Kleine-König1-1/+1
The header of this file fixes the license to GPL 2 only without the option to use later version. So use the string "GPL v2" that is to be used in this case. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Fabio Baltieri <fabio.baltieri@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: ledtrig-transient: fix duration to be msec instead of jiffiesRob Herring1-1/+1
The transient trigger duration is documented to be in msec units, but is actually in jiffies units. Other time based triggers are in msec units as well. Fix the timer setup to convert from msec. This could break an existing userspace that worked around this problem, but exposing jiffies to userspace is just wrong and would break anyway if HZ is changed. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Shuah Khan <shuahkhan@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: linux-leds@vger.kernel.org Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: lm355x: Remove work queueJacek Anaszewski1-59/+26
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Cc: Daniel Jeong <daniel.jeong@ti.com> Cc: G.Shark Jeong <gshark.jeong@gmail.com>
2016-01-04leds: pwm: remove work queueJacek Anaszewski1-21/+13
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Cc: Raphael Assenat <raph@8d.com>
2016-01-04leds: gpio: Remove work queueJacek Anaszewski1-40/+22
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Cc: Raphael Assenat <raph@8d.com>
2016-01-04leds: wm8350: Remove work queueAndrew Lunn1-39/+25
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Antonio Ospite <ao2@ao2.it> Reviewed-by: Mark Brown <broonie@kernel.org>
2016-01-04leds: regulator: Remove work queueAndrew Lunn1-34/+12
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: mc13783: Remove work queueAndrew Lunn1-26/+9
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: max8997: Remove unneeded workqueue includeAndrew Lunn1-1/+0
Work queues are not used in this driver, so remove the include. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2016-01-04leds: lt3593: Remove work queueAndrew Lunn1-23/+10
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: dac124d085: Remove work queueAndrew Lunn1-28/+10
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: da9052: Remove work queueAndrew Lunn1-27/+12
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: da903x: Remove work queueAndrew Lunn1-28/+18
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: wm831x: Remove work queueAndrew Lunn1-16/+9
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: pca963x: Remove work queueAndrew Lunn1-57/+23
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Dan Murphy <dmurphy@ti.com> Cc: Ricardo Ribalda <ricardo.ribalda@gmail.com>
2016-01-04leds: pca955x: Remove work queueAndrew Lunn1-30/+9
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Nate Case <ncase@xes-inc.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: lp8860: Remove work queueAndrew Lunn1-20/+7
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: lp8788: Remove work queueAndrew Lunn1-27/+21
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Milo Kim <milo.kim@ti.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>