summaryrefslogtreecommitdiff
path: root/drivers/lightnvm
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-28lightnvm: pblk: advance bio according to lba indexJavier González3-10/+19
When a lba either hits the cache or corresponds to an empty entry in the L2P table, we need to advance the bio according to the position in which the lba is located. Otherwise, we will copy data in the wrong page, thus causing data corruption for the application. In case of a cache hit, we assumed that bio->bi_iter.bi_idx would contain the correct index, but this is no necessarily true. Instead, use the local bio advance counter and iterator. This guarantees that lbas hitting the cache are copied into the right bv_page. In case of an empty L2P entry, we omitted to advance the bio. In the cases when the same I/O also contains a cache hit, data corresponding to this lba will be copied to the wrong bv_page. Fix this by advancing the bio as we do in the case of a cache hit. Fixes: a4bd217b4326 lightnvm: physical block device (pblk) target Signed-off-by: Javier González <javier@javigon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-07lightnvm: pblk: remove unnecessary checksJavier González1-6/+1
Remove unnecessary checks when freeing dma memory in the completion path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-07lightnvm: pblk: control I/O flow also on tear downJavier González4-35/+78
When removing a pblk instance, control the write I/O flow to the controller as we do in the fast path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30lightnvm: pblk: set line bitmap check under debugJavier González1-1/+4
Do bitmap checks only when debug mode is enable. The line bitmap used for mapping to physical addresses is fairly large (~512KB) and it is expensive to do this checks on the fast path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30lightnvm: pblk: verify that cache read is still validJavier González3-6/+22
When a read is directed to the cache, we risk that the lba has been updated during the time we made the L2P table lookup and the time we are actually reading form the cache. We intentionally not hold the L2P lock not to block other threads. While strict ordering is not a guarantee at this level (unless REQ_FLUSH has been previously issued), we have experience that some databases that have recently implemented direct I/O support, issue metadata reads very close to the writes, without issuing a fsync in the middle. An easy way to support them while they is to make an extra effort and check the L2P map right before reading the cache. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30lightnvm: pblk: add initialization checkJavier González1-0/+6
Add a sanity check to the pblk initialization sequence in order to ensure that enough LUNs have been allocated to store the line metadata. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30lightnvm: pblk: remove target using async. I/OsJavier González6-73/+122
When removing a pblk instance, pad the current line using asynchronous I/O. This reduces the removal time from ~1 minute in the worst case to a couple of seconds. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30lightnvm: pblk: use vmalloc for GC data bufferJavier González5-12/+14
For now, we allocate a per I/O buffer for GC data. Since the potential size of the buffer is 256KB and GC is not in the fast path, do this allocation with vmalloc. This puts lets pressure on the memory allocator at no performance cost. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30lightnvm: pblk: use right metadata buffer for recoveryJavier González1-3/+3
Fix bad metadata buffer assignations introduced when refactoring the medatada write path. Fixes: dd2a43437337 lightnvm: pblk: sched. metadata on write thread Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30lightnvm: pblk: schedule if data is not readyJavier González1-1/+3
When user threads place data into the write buffer, they reserve space and do the memory copy out of the lock. As a consequence, when the write thread starts persisting data, there is a chance that it is not copied yet. In this case, avoid polling, and schedule before retrying. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30lightnvm: pblk: remove unused return variableJavier González1-2/+2
Remove unused variable. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30lightnvm: pblk: fix double-free on pblk initJavier González1-2/+0
Prevent pblk->lines being double freed in case of an error during pblk initialization. Fixes: dd2a43437337: "lightnvm: pblk: sched. metadata on write thread" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-30lightnvm: pblk: fix bad le64 assignationsJavier González4-4/+7
Use the right types and conversions on le64 variables. Reported by sparse. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: if LUNs are already allocated fix returnRakesh Pandit1-2/+3
While creating new device with NVM_DEV_CREATE if LUNs are already allocated ioctl would return -ENOMEM which is wrong. This patch propagates -EBUSY from nvm_reserve_luns which is correct response. Fixes: ade69e243 ("lightnvm: merge gennvm with core") Reviewed-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: fail gracefully on irrec. errorJavier González11-114/+332
Due to user writes being decoupled from media writes because of the need of an intermediate write buffer, irrecoverable media write errors lead to pblk stalling; user writes fill up the buffer and end up in an infinite retry loop. In order to let user writes fail gracefully, it is necessary for pblk to keep track of its own internal state and prevent further writes from being placed into the write buffer. This patch implements a state machine to keep track of internal errors and, in case of failure, fail further user writes in an standard way. Depending on the type of error, pblk will do its best to persist buffered writes (which are already acknowledged) and close down on a graceful manner. This way, data might be recovered by re-instantiating pblk. Such state machine paves out the way for a state-based FTL log. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: set mempool and workqueue params.Javier González4-20/+44
Make constants to define sizes for internal mempools and workqueues. In this process, adjust the values to be more meaningful given the internal constrains of the FTL. In order to do this for workqueues, separate the current auxiliary workqueue into two dedicated workqueues to manage lines being closed and bad blocks. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: redesign GC algorithmJavier González6-278/+368
At the moment, in order to get enough read parallelism, we have recycled several lines at the same time. This approach has proven not to work well when reaching capacity, since we end up mixing valid data from all lines, thus not maintaining a sustainable free/recycled line ratio. The new design, relies on a two level workqueue mechanism. In the first level, we read the metadata for a number of lines based on the GC list they reside on (this is governed by the number of valid sectors in each line). In the second level, we recycle a single line at a time. Here, we issue reads in parallel, while a single GC write thread places data in the write buffer. This design allows to (i) only move data from one line at a time, thus maintaining a sane free/recycled ration and (ii) maintain the GC writer busy with recycled data. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: add lock assertions on helpersJavier González1-0/+4
Add lockdep assertions on helper functions. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: cleanup unnecessary codeJavier González2-7/+0
Cleanup unnecessary headers and code lines. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: set metadata list for all I/OsJavier González2-38/+54
Set a dma area for all I/Os in order to read/write from/to the metadata stored on the per-sector out-of-bound area. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: choose optimal victim GC lineJavier González1-1/+15
At the moment, we separate the closed lines on three different list based on their number of valid sectors. GC recycles lines from each list based on capacity. Lines from each list are taken in a FIFO fashion. Since the number of lines is limited (it corresponds to the number of blocks in a LUN, which is somewhere between 1000-2000), we can afford scanning the lists to choose the optimal line to be recycled. This helps specially in lines with a high number of valid sectors. If the number of blocks per LUN increases, we will consider a more efficient policy. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: decouple bad block from line allocJavier González1-16/+37
Decouple bad block discovery from line allocation logic. This allows to return meaningful error codes in case of bad block discovery failure. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: simplify meta. memory allocationJavier González4-8/+8
smeta size will always be suitable for a kmalloc allocation. Simplify the code and leave the vmalloc fallback only for emeta, where the pblk configuration has an impact. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: issue multiplane reads if possibleJavier González4-12/+51
If a read request is sequential and its size aligns with a multi-plane page size, use the multi-plane hint to process the I/O in parallel in the controller. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: delete redundant buffer pointerJavier González7-41/+11
After refactoring the metadata path, the backpointer controlling synced I/Os in a line becomes unnecessary; metadata is scheduled on the write thread, thus we know when the end of the line is reached and act on it directly. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: delete redundant debug line statJavier González1-5/+3
Remove a legacy variable that helped verifying the consistency of the run-time metadata for the free line list. With the new metadata layout, this check is no longer necessary. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: sched. metadata on write threadJavier González8-285/+673
At the moment, line metadata is persisted on a separate work queue, that is kicked each time that a line is closed. The assumption when designing this was that freeing the write thread from creating a new write request was better than the potential impact of writes colliding on the media (user I/O and metadata I/O). Experimentation has proven that this assumption is wrong; collision can cause up to 25% of bandwidth and introduce long tail latencies on the write thread, which potentially cause user write threads to spend more time spinning to get a free entry on the write buffer. This patch moves the metadata logic to the write thread. When a line is closed, remaining metadata is written in memory and is placed on a metadata queue. The write thread then takes the metadata corresponding to the previous line, creates the write request and schedules it to minimize collisions on the media. Using this approach, we see that we can saturate the media's bandwidth, which helps reducing both write latencies and the spinning time for user writer threads. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: rename read request poolJavier González5-37/+38
Read requests allocate some extra memory to store its per I/O context. Instead of requiring yet another memory pool for other type of requests, generalize this context allocation (and change naming accordingly). Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: generalize erase pathJavier González6-90/+116
Erase I/Os are scheduled with the following goals in mind: (i) minimize LUNs collisions with write I/Os, and (ii) even out the price of erasing on every write, instead of putting all the burden on when garbage collection runs. This works well on the current design, but is specific to the default mapping algorithm. This patch generalizes the erase path so that other mapping algorithms can select an arbitrary line to be erased instead. It also gets rid of the erase semaphore since it creates jittering for user writes. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: expose max sec per write on sysfsJavier González4-1/+48
Allow to configure the number of maximum sectors per write command through sysfs. This makes it easier to tune write command sizes for different controller configurations. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: add debug stat for read cache hitsJavier González4-1/+10
Add a new debug counter to measure cache hits on the read path Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: pblk: spare double cpu_to_le64 calc.Javier González2-4/+5
Spare a double calculation on the fast write path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27lightnvm: re-convert ppa format on I/O failureJavier González1-1/+7
In case of a failure when submitting a request, convert the ppa_list addresses to the target format so that it can interpret ppas for recovery Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-18lightnvm/pblk-read: use bio_clone_fast()NeilBrown3-2/+13
pblk_submit_read() uses bio_clone_bioset() but doesn't change the io_vec, so bio_clone_fast() is a better choice. It also uses fs_bio_set which is intended for filesystems. Using it in a device driver can deadlock. So allocate a new bioset, and and use bio_clone_fast(). Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Javier González <javier@cnexlabs.com> Tested-by: Javier González <javier@cnexlabs.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-18blk: remove bio_set arg from blk_queue_split()NeilBrown2-3/+3
blk_queue_split() is always called with the last arg being q->bio_split, where 'q' is the first arg. Also blk_queue_split() sometimes uses the passed-in 'bs' and sometimes uses q->bio_split. This is inconsistent and unnecessary. Remove the last arg and always use q->bio_split inside blk_queue_split() Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Credit-to: Javier González <jg@lightnvm.io> (Noticed that lightnvm was missed) Reviewed-by: Javier González <javier@cnexlabs.com> Tested-by: Javier González <javier@cnexlabs.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-09block: switch bios to blk_status_tChristoph Hellwig4-9/+9
Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04lightnvm: fix bad back free on error pathJavier González1-2/+2
Free memory correctly when an allocation fails on a loop and we free backwards previously successful allocations. Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-25lightnvm: fix possible memory leak in pblk_bb_discovery()Wei Yongjun1-1/+3
'blks' is malloced in pblk_bb_discovery() and should be freed before leaving from the nvm_get_tgt_bb_tbl() error handling cases, otherwise it will cause memory leak. Also skip assign blks to rlun->bb_list when error. Fixes: a4bd217b4326 ("lightnvm: physical block device (pblk) target") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-24lightnvm: pblk: fix erase counters on error failJavier González7-22/+37
When block erases fail, these blocks are marked bad. The number of valid blocks in the line was not updated, which could cause an infinite loop on the erase path. Fix this atomic counter and, in order to avoid taking an irq lock on the interrupt context, make the erase counters atomic too. Also, in the case that a significant number of blocks become bad in a line, the result is the double shared metadata buffer (emeta) to stop the pipeline until all metadata is flushed to the media. Increase the number of metadata lines from 2 to 4 to avoid this case. Fixes: a4bd217b4326 "lightnvm: physical block device (pblk) target" Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-24lightnvm: pblk: free metadata on line alloc failureJavier González1-7/+9
When a line allocation fails, for example, due to having too many bad blocks, free its metadata correctly. Fixes: a4bd217b4326 "lightnvm: physical block device (pblk) target" Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-24lightnvm: pblk: fix memory leak on error pathJavier González1-0/+3
When write recovery fails, Free memory for the recovery structure. Fixes: a4bd217b4326 "lightnvm: physical block device (pblk) target" Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-24lightnvm: pblk: fix bad error checkJavier González1-1/+1
Fix bad error check Fixes: a4bd217b4326 "lightnvm: physical block device (pblk) target" Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-24lightnvm: pblk: fix race condition on line retryJavier González1-3/+3
When a pblk line fails (or is recovered), make sure to take the line management lock. Fixes: a4bd217b4326 "lightnvm: physical block device (pblk) target" Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-22lightnvm: don't print a warning for ADDR_EMPTYDan Carpenter1-3/+3
Reading from ADDR_EMPTY is out of bounds. The current code generates a static checker warning because we check for out of bounds "lba" before we check for ADDR_EMPTY, so the second check is always false. It looks like we intended ADDR_EMPTY to be a no-op without printing a warning. Fixes: a4bd217b4326 ("lightnvm: physical block device (pblk) target") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-22lightnvm: potential underflow in pblk_read_rq()Dan Carpenter1-1/+1
This is a static checker fix, and perhaps not a real bug. The static checker thinks that nr_secs could be negative. It would result in zeroing more memory than intended. Anyway, even if it's not a bug, changing this variable to unsigned makes the code easier to audit. Fixes: a4bd217b4326 ("lightnvm: physical block device (pblk) target") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-21lightnvm: propagate pblk_init return to userspaceRakesh Pandit1-6/+18
From userspace calling ioctl(NVM_DEV_CREATE) was returning ENOMEM for invalid arguments even though pblk (pblk_init) was returning correctly -EINVAL to nvm_create_tgt inside core. This patch propagates the correct return value to userspace. Because pblk was introduced recently this only needs to go in 4.12. Fixes: a4bd217b4326 ("lightnvm: physical block device (pblk) target") Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20ligtnvm: fix double blk_put_queue on same queueRakesh Pandit1-0/+1
On an error path in NVM_DEV_CREATE ioctl blk_put_queue is being called twice: one via blk_cleanup_queue and another via put_disk. Straight fix seems to remove queue pointer so that disk_release never ends up caling blk_put_queue again. [ 391.808827] WARNING: CPU: 1 PID: 1250 at lib/refcount.c:128 refcount_sub_and_test+0x70/0x80 [ 391.808830] refcount_t: underflow; use-after-free. [ 391.808832] Modules linked in: nf_conntrack_netbios_ns............ [ 391.809052] CPU: 1 PID: 1250 Comm: nvme Not tainted......... [ 391.809057] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 391.809060] Call Trace: [ 391.809079] dump_stack+0x63/0x86 [ 391.809094] __warn+0xcb/0xf0 [ 391.809103] warn_slowpath_fmt+0x5f/0x80 [ 391.809118] refcount_sub_and_test+0x70/0x80 [ 391.809125] refcount_dec_and_test+0x11/0x20 [ 391.809136] kobject_put+0x1f/0x60 [ 391.809149] blk_put_queue+0x15/0x20 [ 391.809159] disk_release+0xae/0xf0 [ 391.809172] device_release+0x32/0x90 [ 391.809184] kobject_release+0x6a/0x170 [ 391.809196] kobject_put+0x2f/0x60 [ 391.809206] put_disk+0x17/0x20 [ 391.809219] nvm_ioctl_dev_create.isra.16+0x897/0xa30 [ 391.809236] nvm_ctl_ioctl+0x23c/0x4c0 [ 391.809248] do_vfs_ioctl+0xa3/0x5f0 [ 391.809258] SyS_ioctl+0x79/0x90 [ 391.809271] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 391.809280] RIP: 0033:0x7f5d3ef363c7 [ 391.809286] RSP: 002b:00007ffc72ed8d78 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [ 391.809296] RAX: ffffffffffffffda RBX: 00007ffc72edb552 RCX: 00007f5d3ef363c7 [ 391.809301] RDX: 00007ffc72ed8d90 RSI: 0000000040804c22 RDI: 0000000000000003 [ 391.809306] RBP: 0000000000000001 R08: 0000000000000020 R09: 0000000000000001 [ 391.809311] R10: 000000000000053f R11: 0000000000000206 R12: 0000000000000000 [ 391.809316] R13: 0000000000000000 R14: 00007ffc72edb58d R15: 00007ffc72edb581 Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Fixes: 7d1ef2f408ab "lightnvm: fix cleanup order of disk on init error" Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-19lightnvm: assume 64-bit lba numbersArnd Bergmann1-1/+1
The driver uses both u64 and sector_t to refer to offsets, and assigns between the two. This causes one harmless warning when sector_t is 32-bit: drivers/lightnvm/pblk-rb.c: In function 'pblk_rb_write_entry_gc': include/linux/lightnvm.h:215:20: error: large integer implicitly truncated to unsigned type [-Werror=overflow] drivers/lightnvm/pblk-rb.c:324:22: note: in expansion of macro 'ADDR_EMPTY' As the driver is already doing this inconsistently, changing the type won't make it worse and is an easy way to avoid the warning. Fixes: a4bd217b4326 ("lightnvm: physical block device (pblk) target") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: fix some error code in pblk-init.cDan Carpenter1-6/+14
There were a bunch of places in pblk_lines_init() where we didn't set an error code. And in pblk_writer_init() we accidentally return 1 instead of a correct error code, which would result in a Oops later. Fixes: 11a5d6fdf919 ("lightnvm: physical block device (pblk) target") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>