| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use the new common CCI register access helpers to replace the private
register access helpers in the imx219 driver. This simplifies the driver
by reducing the amount of code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The MT9M114 is a CMOS camera sensor that combines a 1296x976 pixel array
with a 10-bit dynamic range together with an internal ISP. The driver
exposes two subdevs, one for the pixel array and one for the ISP (named
IFP for Image Flow Processor). Major supported features are
- Full configuration of analog crop and binning in the pixel array
- Full configuration of scaling in the ISP
- Automatic exposure and white balance
- Manual exposure and analog gain
- Horizontal and vertical flip
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use the new comon CCI register access helpers to replace the private
register access helpers in the ov2680 driver.
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a driver for the DW9719 VCM. The driver creates a v4l2 subdevice
and registers a control to set the desired focus.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use the new comon CCI register access helpers to replace the private
register access helpers in the imx290 driver.
[Sakari Ailus: Squashed the patch to address a merge issue in Kconfig]
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use the new comon CCI register access helpers to replace the private
register access helpers in the ov5693 driver.
[Sakari Ailus: Squashed the patch to address a merge issue in Kconfig]
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
As selecting V4L2_FWNODE, MEDIA_CONTROLLER and VIDEO_V4L2_SUBDEV_API are
now selected by the top level menu, they can be dropped from the
individual drivers. Also dropped selecting V4L2_ASYNC for a single driver
as this is already implied by V4L2_FWNODE.
Similarly, the I2C dependency is now also in the top level menu, so remove
it, as well as VIDEO_DEV which isn't needed by camera sensor drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Select V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API for all sensor drivers. This
also adds the options to drivers that don't specifically need them, these
are still seldom used drivers using old APIs. The upside is that these
should now all compile --- many drivers have had missing dependencies.
The "menu" is replaced by selectable "menuconfig" to select the needed
V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API options.
Also select MEDIA_CONTROLLER which VIDEO_V4L2_SUBDEV_API effectively
depends on, and add the I2C dependency to the menu.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org # for >= 6.1
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add driver for TI DS90UB953 FPD-Link III Serializer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add driver for TI DS90UB913 FPD-Link III Serializer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add driver for TI DS90UB960 FPD-Link III Deserializer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The tc358746 driver selects CONFIG_GENERIC_PHY_MIPI_DPHY and links to
that, but this fails when CONFIG_GENERIC_PHY is disabled, because Kbuild
then never enters the drivers/phy directory for building object files:
ERROR: modpost: "phy_mipi_dphy_get_default_config_for_hsclk" [drivers/media/i2c/tc358746.ko] undefined!
Add an explicit 'select GENERIC_PHY' here to ensure that the directory
is entered, and add another dependency on that symbol so make it
more obvious what is going on if another driver has the same problem,
as this will produce a Kconfig warning.
Link: https://lore.kernel.org/linux-media/20230623152318.2276816-1-arnd@kernel.org
Fixes: 80a21da360516 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add v4l2 device driver for OmniVision ov01a10 image sensor, ov01a10
image sensor can deliver 1280x800 resolution BGGR10 images at 60 fps.
Signed-off-by: Yating Wang <yating.wang@intel.com>
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The vs6624 camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v4.17. The driver hasn't
been used since them. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The sr030pc30 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v2.6.37. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The s5k6aa camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v3.11. The driver hasn't
been used since them. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The noon010pc30 camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v3.16. A device tree file
referencing the device has been added in v3.17, but without
corresponding DT bindings, and with DT support in the driver. The driver
thus hasn't been used since v316. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The mt9t001 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v3.2. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The mt9m032 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v3.4. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The m5mols camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v3.11. The driver hasn't
been used since them. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The ad9389b video encoder driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v3.7. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
VIDEO_V4L2_SUBDEV_API is required for v4l2_subdev_get_pad_*() functions.
Select it.
Fixes: ("media: i2c: ov2685: Add .get_selection() support")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add driver for the Sony IMX415 CMOS image sensor.
Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Co-developed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The IMX296LLR is a monochrome 1.60MP CMOS sensor from Sony. The driver
supports cropping and binning (but not both at the same time due to
hardware limitations) and exposure, gain, vertical blanking and test
pattern controls.
Preliminary support is also included for the color IMX296LQR sensor.
[Sakari Ailus: Make driver's remove function return void]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a driver for OmniVision OV8858 image sensor.
The driver currently supports operations with 2 and 4 data lanes, in
full resolution and half-binned resolution modes.
The driver has been upported from the PinephonePro BSP available at
https://gitlab.com/pine64-org/linux.git
at commit 8c4a90c12dc2 ("media: i2c: ov8858: Use default subdev
name").
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This driver was until the previous patch unused in the kernel
and depended on platform data that no board was defining.
As no users can be proven to exist, delete the driver.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Commit 9958d30f38b9 ("media: Kconfig: cleanup VIDEO_DEV dependencies")
removes the config VIDEO_V4L2 as it is merged with config VIDEO_DEV.
Long after this change, commit 38fc5136ac16 ("media: i2c: Add ov08x40 image
sensor driver") introduces and refers to the removed config VIDEO_V4L2,
basically making this driver impossible to build, test and use due to
dependencies that cannot be met.
Refer to config VIDEO_DEV instead to make this driver usable.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Fixes: 38fc5136ac16 ("media: i2c: Add ov08x40 image sensor driver")
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Still there are archs/platforms which do not support the common clk
framework. If such a platform is used in combination with the module
enabled the compiler will throw an error. Since the clock has stubs if
not selected we can drop it, so it is up to the arch/platform to select
the correct clock framework.
Fixes: 80a21da36051 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Adding support for the TC358746 parallel <-> MIPI CSI bridge. This chip
supports two operating modes:
1st) parallel-in -> mipi-csi out
2nd) mipi-csi in -> parallel out
This patch only adds the support for the 1st mode.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: remove() now returns void]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The VGXY61 has a quad lanes CSI-2 output port running at 800mbps per
lane, and supports RAW8, RAW10, RAW12, RAW14 and RAW16 formats.
The driver handles both sensor types:
- VG5661 and VG6661: 1.6 Mpx (1464 x 1104) 75fps.
- VG5761 and VG6761: 2.3 Mpx (1944 x 1204) 60 fps.
The driver supports:
- HDR linearize mode, HDR substraction mode, and no HDR
- GPIOs LEDs strobing
- Digital binning and analog subsampling
- Horizontal and vertical flip
- Manual exposure
- Analog and digital gains
- Test patterns
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
[Sakari Ailus: remove() now returns void]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Add a V4L2 sub-device driver for OmniVision OV4689 image sensor. This
is a 4 Mpx image sensor using the I2C bus for control and the CSI-2
bus for data.
This driver supports following features:
- manual exposure and analog gain control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
+ 2688x1520 at 30 fps
The driver provides all mandatory V4L2 controls for compatibility with
libcamera. The sensor supports 1/2/4-lane CSI-2 modes, but the driver
implements 4 lane mode only at this moment.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Add a V4L2 sub-device driver for Omnivision ov08X40 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
+ 3856x2464 at 30FPS
+ 1928x1208 at 30FPS
Signed-off-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Shawn Tu <shawnx.tu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
VIDEO_V4L2 no longer exists, instead use VIDEO_DEV. Without this change
this driver cannot be selected.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The VIDEO_V4L2_SUBDEV_API Kconfig symbol is mostly selected
automatically, with a a handful of drivers still using it as a
dependency. Fix them to use selection, and drop the symbol title text to
not expose it for manual selection.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The driver has been extensively tested in an i.MX6-based system.
AR0521 is a 5.7 mm x 4.3 mm, 5 MPix RGGB MIPI/HiSPi BSI CMOS sensor
from On Semiconductor.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Fix build error when VIDEO_ISL7998X=y and V4L2_FWNODE=m
by selecting V4L2_FWNODE.
microblaze-linux-ld: drivers/media/i2c/isl7998x.o: in function `isl7998x_probe':
(.text+0x8f4): undefined reference to `v4l2_fwnode_endpoint_parse'
Cc: stable@vger.kernel.org # 5.18 and above
Fixes: 51ef2be546e2 ("media: i2c: isl7998x: Add driver for Intersil ISL7998x")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add V4L2_ASYNC as a dependency to match other drivers and prevent failures
when compile testing.
Fixes: ff3cc65cadb5 ("media: v4l: async, fwnode: Improve module organisation")
Signed-off-by: Mike Pagano <mpagano@gentoo.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The camera drivers are the ones that suffer additions/changes
on those days. Place them on the top of the I2C drivers.
Suggested-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Currently, the idems inside media Kconfig are out of order.
Sort them using the script below:
<script>
use strict;
use warnings;
my %config;
my @source;
my $out;
sub flush_config()
{
if (scalar %config) {
for my $c (sort keys %config) {
$out .= $config{$c} . "\n";
}
%config = ();
}
return if (!scalar @source);
$out .= "\n";
for my $s (sort @source) {
$out .= $s;
}
$out .= "\n";
@source = ();
}
sub sort_kconfig($)
{
my $fname = shift;
my $cur_config = "";
@source = ();
$out = "";
%config = ();
open IN, $fname or die;
while (<IN>) {
if (m/^config\s+(.*)/) {
$cur_config = $1;
$config{$cur_config} .= $_;
} elsif (m/^source\s+(.*)/) {
push @source, $_;
} elsif (m/^\s+/) {
if ($cur_config eq "") {
$out .= $_;
} else {
$config{$cur_config} .= $_;
}
} else {
flush_config();
$cur_config = "";
$out .= $_;
}
}
close IN or die;
flush_config();
$out =~ s/\n\n+/\n\n/g;
$out =~ s/\n+$/\n/;
open OUT, ">$fname";
print OUT $out;
close OUT;
}
for my $fname(@ARGV) {
sort_kconfig $fname
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
media Kconfig has two entries associated to V4L API:
VIDEO_DEV and VIDEO_V4L2.
On Kernel 2.6.x, there were two V4L APIs, each one with its own flag.
VIDEO_DEV were meant to:
1) enable Video4Linux and make its Kconfig options to appear;
2) it makes the Kernel build the V4L core.
while VIDEO_V4L2 where used to distinguish between drivers that
implement the newer API and drivers that implemented the former one.
With time, such meaning changed, specially after the removal of
all V4L version 1 drivers.
At the current implementation, VIDEO_DEV only does (1): it enables
the media options related to V4L, that now has:
menu "Video4Linux options"
visible if VIDEO_DEV
source "drivers/media/v4l2-core/Kconfig"
endmenu
but it doesn't affect anymore the V4L core drivers.
The rationale is that the V4L2 core has a "soft" dependency
at the I2C bus, and now requires to select a number of other
Kconfig options:
config VIDEO_V4L2
tristate
depends on (I2C || I2C=n) && VIDEO_DEV
select RATIONAL
select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE
default (I2C || I2C=n) && VIDEO_DEV
In the past, merging them would be tricky, but it seems that it is now
possible to merge those symbols, in order to simplify V4L dependencies.
Let's keep VIDEO_DEV, as this one is used on some make *defconfig
configurations.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for meson-vdec & meson-ge2d
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add driver for the Intersil ISL7998x Analog to MIPI CSI-2/BT656 decoder.
This chip supports 1/2/4 analog video inputs and converts them into
1/2/4 VCs in MIPI CSI2 stream.
This driver currently supports ISL79987 and both 720x480 and 720x576
resolutions, however as per specification, all inputs must use the
same resolution and standard. The only supported pixel format is now
YUYV/YUV422. The chip should support RGB565 on the CSI2 as well, but
this is currently unsupported.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
To: linux-media@vger.kernel.org
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[Sakari Ailus: Always call pm_runtime_get_and_resume in pre_streamon]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Add a V4L2 sub-device driver for Omnivision og01a1b b&w
image sensor. This is a camera sensor using the I2C bus
for control and the CSI-2 bus for data.
This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
+ 1280x1024 at 120FPS
Signed-off-by: Shawn Tu <shawnx.tu@intel.com>
[Sakari Ailus: Update according to recent v4l2-async API changes]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Add a v4l2 sub-device driver for the OmniVision ov08d10 image sensor.
This camera sensor is using the i2c bus for control and the
csi-2 bus for data.
The following features are supported:
- manual exposure and analog/digital gain control
- vblank/hblank control
- test pattern
- image vertical flip and horizontal mirror control
- supported resolution:
- 3280x2460 at 30 FPS
- 3264x2448 at 30 FPS
- 1632x1224 at 30 FPS
- supported bayer order output:
- SGRBG10 as default
- SBGGR10 at flip mode
- SRGGB10 at mirror mode
- SGBRG10 at flip + mirror mode
Signed-off-by: Jimmy Su <jimmy.su@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a V4L2 sub-device driver for Hynix Hi-847 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- vflip/hflip control support
- keep SGRBG10 Bayer order output
- support following resolutions:
+ 3264x2448 at 30FPS
+ 1632x1224 at 60FPS
[Sakari Ailus: Wrapped a few long lines.]
Signed-off-by: Shawn Tu <shawnx.tu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The OV5693 is a 5 Mpx CMOS image sensor, connected via MIPI CSI-2. The
chip is capable of a single lane configuration, but currently only two
lanes are supported.
Most of the sensor's features are supported, with the main exception
being the lens correction algorithm.
The driver provides all mandatory, optional and recommended V4L2 controls
for maximum compatibility with libcamera.
[mchehab: fixed a coding style warning]
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The MAX9286 has not explicitly declared a dependency upon VIDEO_V4L2.
While this dependency has likely always been met by configurations
including it, the device does use V4L2 core, and should depend upon it.
Add VIDEO_V4L2 as a dependency to match other drivers and prevent
failures when compile testing.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
I came across a link failure from randconfig builds:
x86_64-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_remove':
ths8200.c:(.text+0x491): undefined reference to `v4l2_async_unregister_subdev'
x86_64-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_probe':
ths8200.c:(.text+0xe49): undefined reference to `v4l2_async_register_subdev'
x86_64-linux-ld: drivers/media/i2c/tw9910.o: in function `tw9910_remove':
tw9910.c:(.text+0x467): undefined reference to `v4l2_async_unregister_subdev'
x86_64-linux-ld: drivers/media/i2c/tw9910.o: in function `tw9910_probe':
tw9910.c:(.text+0x1123): undefined reference to `v4l2_async_register_subdev'
These clearly lack a 'select' statement, but I don't know why
this started happening only now. I had a bit of a look around to find
other configs that have the same problem, but could not come up with
a reliable way and found nothing else through experimentation.
It is likely that other symbols like these exist that need an extra
select.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The SK Hynix Hi-846 is a 1/4" 8M Pixel CMOS Image Sensor. It supports
usual features like I2C control, CSI-2 for frame data, digital/analog
gain control or test patterns.
This driver supports the 640x480, 1280x720 and 1632x1224 resolution
modes. It supports runtime PM in order not to draw any unnecessary power.
The part is also called YACG4D0C9SHC and a datasheet can be found at
https://product.skhynix.com/products/cis/cis.go
The large sets of partly undocumented register values are for example
found when searching for the hi846_mipi_raw_Sensor.c Android driver.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix the build errors reported by the kernel test robot by
selecting V4L2_ASYNC:
mips-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_remove':
ths8200.c:(.text+0x1ec): undefined reference to `v4l2_async_unregister_subdev'
mips-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_probe':
ths8200.c:(.text+0x404): undefined reference to `v4l2_async_register_subdev'
Fixes: ed29f89497006 ("media: i2c: ths8200: support asynchronous probing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This driver supports following features:
- phase detection auto focus (PDAF)
- manual exposure and analog/digital gain control
- vblank/hblank control
- test pattern
- image vertical flip and horizontal mirror control
- 4208x3120 at 30FPS
- 2080x1170 at 60FPS
Signed-off-by: Arec Kao <arec.kao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
