summaryrefslogtreecommitdiff
path: root/drivers/media/i2c/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2023-12-13media: i2c: Add driver for OmniVision OV64A40Jacopo Mondi1-0/+1
Add a driver for the OmniVision OV64A40 image sensor. Co-developed-by: Lee Jackson <lee.jackson@arducam.com> Signed-off-by: Lee Jackson <lee.jackson@arducam.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-12-13media: i2c: gc0308: new driverSebastian Reichel1-0/+1
Introduce new driver for GalaxyCore GC0308, which is a cheap 640x480 with an on-chip ISP sensor sold since 2010. Data is provided via parallel bus. Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> [Sakari Ailus: Changed MAINTAINERS to match GC2145 entry.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-12-13media: i2c: Add support for alvium cameraTommaso Merciai1-0/+1
The Alvium camera is shipped with sensor + isp in the same housing. The camera can be equipped with one out of various sensor and abstract the user from this. Camera is connected via MIPI CSI-2. Most of the camera module features are supported, with the main exception being fw update. The driver provides all mandatory, optional and recommended V4L2 controls for maximum compatibility with libcamera References: - https://www.alliedvision.com/en/products/embedded-vision-solutions Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> [Sakari Ailus: Assign ret before using it in probe and squash Tommaso's other fixes.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil: alvium-csi2.h: SPDX must use /* */ instead of //]
2023-12-13media: i2c: Introduce a driver for the Techwell TW9900 decoderMehdi Djait1-0/+1
The Techwell video decoder supports PAL, NTSC standards and has a parallel BT.656 output interface. This commit adds support for this device, with basic support for NTSC and PAL, along with brightness and contrast controls. The TW9900 is capable of automatic standard detection. This driver is implemented with support for PAL and NTSC autodetection. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Mehdi Djait <mehdi.djait@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-12-04media: i2c: Add driver for THine THP7312Paul Elder1-0/+1
The THP7312 is an external camera ISP from THine. Add a V4L2 subdev driver for it. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [Sakari Ailus: squash a patch to fix missing mutex_unlock by Laurent.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-12-04media: i2c: gc2145: Galaxy Core GC2145 sensor supportAlain Volmat1-0/+1
Addition of support for the Galaxy Core GC2145 XVGA sensor. The sensor supports both DVP and CSI-2 interfaces however for the time being only CSI-2 is implemented. Configurations are currently based on initialization scripts coming from Galaxy Core and so for that purpose only 3 static resolutions are supported: - 640x480 - 1280x720 - 1600x1200 Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: i2c: Add driver for onsemi MT9M114 camera sensorLaurent Pinchart1-0/+1
The MT9M114 is a CMOS camera sensor that combines a 1296x976 pixel array with a 10-bit dynamic range together with an internal ISP. The driver exposes two subdevs, one for the pixel array and one for the ISP (named IFP for Image Flow Processor). Major supported features are - Full configuration of analog crop and binning in the pixel array - Full configuration of scaling in the ISP - Automatic exposure and white balance - Manual exposure and analog gain - Horizontal and vertical flip Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-08-10media: i2c: Add driver for DW9719 VCMDaniel Scally1-0/+1
Add a driver for the DW9719 VCM. The driver creates a v4l2 subdevice and registers a control to set the desired focus. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-07-14media: i2c: add DS90UB953 driverTomi Valkeinen1-0/+1
Add driver for TI DS90UB953 FPD-Link III Serializer. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-07-14media: i2c: add DS90UB913 driverTomi Valkeinen1-0/+1
Add driver for TI DS90UB913 FPD-Link III Serializer. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-07-14media: i2c: add DS90UB960 driverTomi Valkeinen1-0/+1
Add driver for TI DS90UB960 FPD-Link III Deserializer. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-25media: i2c: add ov01a10 image sensor driverBingbu Cao1-0/+1
Add v4l2 device driver for OmniVision ov01a10 image sensor, ov01a10 image sensor can deliver 1280x800 resolution BGGR10 images at 60 fps. Signed-off-by: Yating Wang <yating.wang@intel.com> Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-15media: i2c: Drop unused vs6624 camera sensor driverLaurent Pinchart1-1/+0
The vs6624 camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v4.17. The driver hasn't been used since them. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused sr030pc30 camera sensor driverLaurent Pinchart1-1/+0
The sr030pc30 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v2.6.37. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused s5k6aa camera sensor driverLaurent Pinchart1-1/+0
The s5k6aa camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v3.11. The driver hasn't been used since them. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused noon010pc30 camera sensor driverLaurent Pinchart1-1/+0
The noon010pc30 camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v3.16. A device tree file referencing the device has been added in v3.17, but without corresponding DT bindings, and with DT support in the driver. The driver thus hasn't been used since v316. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused mt9t001 camera sensor driverLaurent Pinchart1-1/+0
The mt9t001 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.2. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused mt9m032 camera sensor driverLaurent Pinchart1-1/+0
The mt9m032 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.4. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused m5mols camera sensor driverLaurent Pinchart1-1/+0
The m5mols camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v3.11. The driver hasn't been used since them. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused ad9389b video encoder driverLaurent Pinchart1-1/+0
The ad9389b video encoder driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.7. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: add imx415 cmos image sensor driverGerald Loacker1-0/+1
Add driver for the Sony IMX415 CMOS image sensor. Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net> Co-developed-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: IMX296 camera sensor driverLaurent Pinchart1-0/+1
The IMX296LLR is a monochrome 1.60MP CMOS sensor from Sony. The driver supports cropping and binning (but not both at the same time due to hardware limitations) and exposure, gain, vertical blanking and test pattern controls. Preliminary support is also included for the color IMX296LQR sensor. [Sakari Ailus: Make driver's remove function return void] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: Add driver for OmniVision OV8858Nicholas Roth1-0/+1
Add a driver for OmniVision OV8858 image sensor. The driver currently supports operations with 2 and 4 data lanes, in full resolution and half-binned resolution modes. The driver has been upported from the PinephonePro BSP available at https://gitlab.com/pine64-org/linux.git at commit 8c4a90c12dc2 ("media: i2c: ov8858: Use default subdev name"). Signed-off-by: Nicholas Roth <nicholas@rothemail.net> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-12-07media: s5k4ecgx: Delete driverLinus Walleij1-1/+0
This driver was until the previous patch unused in the kernel and depended on platform data that no board was defining. As no users can be proven to exist, delete the driver. Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-27media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driverMarco Felsch1-0/+1
Adding support for the TC358746 parallel <-> MIPI CSI bridge. This chip supports two operating modes: 1st) parallel-in -> mipi-csi out 2nd) mipi-csi in -> parallel out This patch only adds the support for the 1st mode. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [Sakari Ailus: remove() now returns void] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-10-27media: i2c: Add driver for ST VGXY61 camera sensorBenjamin Mugnier1-0/+1
The VGXY61 has a quad lanes CSI-2 output port running at 800mbps per lane, and supports RAW8, RAW10, RAW12, RAW14 and RAW16 formats. The driver handles both sensor types: - VG5661 and VG6661: 1.6 Mpx (1464 x 1104) 75fps. - VG5761 and VG6761: 2.3 Mpx (1944 x 1204) 60 fps. The driver supports: - HDR linearize mode, HDR substraction mode, and no HDR - GPIOs LEDs strobing - Digital binning and analog subsampling - Horizontal and vertical flip - Manual exposure - Analog and digital gains - Test patterns Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> [Sakari Ailus: remove() now returns void] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-10-25media: i2c: add support for OV4689Mikhail Rudenko1-0/+1
Add a V4L2 sub-device driver for OmniVision OV4689 image sensor. This is a 4 Mpx image sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog gain control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 2688x1520 at 30 fps The driver provides all mandatory V4L2 controls for compatibility with libcamera. The sensor supports 1/2/4-lane CSI-2 modes, but the driver implements 4 lane mode only at this moment. Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-10-25media: i2c: Add ov08x40 image sensor driverShawn Tu1-0/+1
Add a V4L2 sub-device driver for Omnivision ov08X40 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 3856x2464 at 30FPS + 1928x1208 at 30FPS Signed-off-by: Jason Chen <jason.z.chen@intel.com> Signed-off-by: Shawn Tu <shawnx.tu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-07-08media: On Semi AR0521 sensor driverKrzysztof Hałasa1-0/+1
The driver has been extensively tested in an i.MX6-based system. AR0521 is a 5.7 mm x 4.3 mm, 5 MPix RGGB MIPI/HiSPi BSI CMOS sensor from On Semiconductor. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-03-14media: Makefiles: sort entries where it fitsMauro Carvalho Chehab1-92/+92
Alphabetically sort entries at the Makefiles per group, in ASCII order, e. g., using the output of: $ LC_ALL=C sort Makefile |grep obj-y ... $ LC_ALL=C sort Makefile |grep obj.*CONFIG ... Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-03-12media: Makefiles: remove extra spacesMauro Carvalho Chehab1-46/+46
It is hard to keep all those options aligned as newer config changes get added, and we really don't want to have patches adding new options also touching already existing entries. So, drop the extra spaces. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-03-04media: i2c: isl7998x: Add driver for Intersil ISL7998xMarek Vasut1-0/+1
Add driver for the Intersil ISL7998x Analog to MIPI CSI-2/BT656 decoder. This chip supports 1/2/4 analog video inputs and converts them into 1/2/4 VCs in MIPI CSI2 stream. This driver currently supports ISL79987 and both 720x480 and 720x576 resolutions, however as per specification, all inputs must use the same resolution and standard. The only supported pixel format is now YUYV/YUV422. The chip should support RGB565 on the CSI2 as well, but this is currently unsupported. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> To: linux-media@vger.kernel.org Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [Sakari Ailus: Always call pm_runtime_get_and_resume in pre_streamon] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-03-04media: Add a driver for the og01a1b camera sensorShawn Tu1-0/+1
Add a V4L2 sub-device driver for Omnivision og01a1b b&w image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 1280x1024 at 120FPS Signed-off-by: Shawn Tu <shawnx.tu@intel.com> [Sakari Ailus: Update according to recent v4l2-async API changes] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-01-28media: i2c: Add ov08d10 camera sensor driverJimmy Su1-0/+1
Add a v4l2 sub-device driver for the OmniVision ov08d10 image sensor. This camera sensor is using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog/digital gain control - vblank/hblank control - test pattern - image vertical flip and horizontal mirror control - supported resolution: - 3280x2460 at 30 FPS - 3264x2448 at 30 FPS - 1632x1224 at 30 FPS - supported bayer order output: - SGRBG10 as default - SBGGR10 at flip mode - SRGGB10 at mirror mode - SGBRG10 at flip + mirror mode Signed-off-by: Jimmy Su <jimmy.su@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-28media: hi847: Add support for Hi-847 sensorShawn Tu1-0/+1
Add a V4L2 sub-device driver for Hynix Hi-847 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - vflip/hflip control support - keep SGRBG10 Bayer order output - support following resolutions: + 3264x2448 at 30FPS + 1632x1224 at 60FPS [Sakari Ailus: Wrapped a few long lines.] Signed-off-by: Shawn Tu <shawnx.tu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2021-11-30media: i2c: Add support for ov5693 sensorDaniel Scally1-0/+1
The OV5693 is a 5 Mpx CMOS image sensor, connected via MIPI CSI-2. The chip is capable of a single lane configuration, but currently only two lanes are supported. Most of the sensor's features are supported, with the main exception being the lens correction algorithm. The driver provides all mandatory, optional and recommended V4L2 controls for maximum compatibility with libcamera. [mchehab: fixed a coding style warning] Signed-off-by: Daniel Scally <djrscally@gmail.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-10-08media: i2c: add driver for the SK Hynix Hi-846 8M pixel cameraMartin Kepplinger1-0/+1
The SK Hynix Hi-846 is a 1/4" 8M Pixel CMOS Image Sensor. It supports usual features like I2C control, CSI-2 for frame data, digital/analog gain control or test patterns. This driver supports the 640x480, 1280x720 and 1632x1224 resolution modes. It supports runtime PM in order not to draw any unnecessary power. The part is also called YACG4D0C9SHC and a datasheet can be found at https://product.skhynix.com/products/cis/cis.go The large sets of partly undocumented register values are for example found when searching for the hi846_mipi_raw_Sensor.c Android driver. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-09-30media: Add sensor driver support for the ov13b10 camera.Arec Kao1-0/+1
This driver supports following features: - phase detection auto focus (PDAF) - manual exposure and analog/digital gain control - vblank/hblank control - test pattern - image vertical flip and horizontal mirror control - 4208x3120 at 30FPS - 2080x1170 at 60FPS Signed-off-by: Arec Kao <arec.kao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-08-04media: i2c: Add ov9282 camera sensor driverMartina Krasteva1-0/+1
Add a v4l2 sub-device driver for the OmniVisison ov9282 black&white image sensor. The camera sensor uses the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog gain control support - vblank/hblank/pixel rate/link freq control support - supported resolution: - 1280x720 @ 30fps [Sakari Ailus: Rebase on commit c802a4174beeb25cb539c806c9d0d3c0f61dfa53.] Signed-off-by: Martina Krasteva <martinax.krasteva@intel.com> Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Acked-by: Paul J. Murphy <paul.j.murphy@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-08-04media: i2c: Add imx412 camera sensor driverMartina Krasteva1-1/+1
Add a v4l2 sub-device driver for the Sony imx412 image sensor. This is a camera sensor using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog gain control support - vblank/hblank/pixel rate/link freq control support - supported resolution: - 4056x3040 @ 30fps - supported bayer order output: - SRGGB10 [Sakari Ailus: Rebase on commit c802a4174beeb25cb539c806c9d0d3c0f61dfa53.] Signed-off-by: Martina Krasteva <martinax.krasteva@intel.com> Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Acked-by: Paul J. Murphy <paul.j.murphy@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-08-04media: i2c: Add imx335 camera sensor driverMartina Krasteva1-0/+1
Add a v4l2 sub-device driver for the Sony imx335 image sensor. ThE camera sensor uses the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog gain control support - vblank/hblank/pixel rate/link freq control support - supported resolution: - 2592x1940 @ 30fps - supported bayer order output: - SRGGB12 [Sakari Ailus: Rebase on commit c802a4174beeb25cb539c806c9d0d3c0f61dfa53.] Signed-off-by: Martina Krasteva <martinax.krasteva@intel.com> Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Acked-by: Paul J. Murphy <paul.j.murphy@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: imx208: Add imx208 camera sensor driverShawn Tu1-0/+1
Add a V4L2 sub-device driver for the Sony IMX208 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. [Sakari Ailus: Rename sensor async register function to make it compile, use exposure_max and wrap a few long lines.] Signed-off-by: Ping-Chung Chen <ping-chung.chen@intel.com> Signed-off-by: Yeh, Andy <andy.yeh@intel.com> Signed-off-by: Shawn Tu <shawnx.tu@intel.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-09media: i2c: Kconfig: Make MAX9271 a moduleJacopo Mondi1-4/+3
With the introduction of the RDACM21 camera module support in commit a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module") the symbols defined by the max9271 library were exported twice if multiple users of the library were compiled in at the same time. In example: WARNING: modpost: drivers/media/i2c/rdacm21-camera_module: 'max9271_set_serial_link' exported twice. Previous export was in drivers/media/i2c/rdacm20-camera_module.ko Fix this by making the max9271 file a module and have the driver using its functions select it. Fixes: a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: i2c: Add imx334 camera sensor driverMartina Krasteva1-0/+1
Add a v4l2 sub-device driver for the Sony imx334 image sensor. This is a camera sensor using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog gain control support - vblank/hblank/pixel rate/link freq control support - supported resolution: - 3840x2160 @ 60fps - supported bayer order output: - SRGGB12 Signed-off-by: Martina Krasteva <martinax.krasteva@intel.com> Reviewed-by: Gjorgji Rosikopulos <gjorgjix.rosikopulos@intel.com> Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Acked-by: Paul J. Murphy <paul.j.murphy@intel.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: i2c: Add driver for RDACM21 camera moduleJacopo Mondi1-0/+2
The RDACM21 is a GMSL camera supporting 1280x1080 resolution images developed by IMI based on an Omnivision OV10640 sensor, an Omnivision OV490 ISP and a Maxim MAX9271 GMSL serializer. The driver uses the max9271 library module, to maximize code reuse with other camera module drivers using the same serializer, such as rdacm20. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: i2c: Add support for the OV8865 image sensorPaul Kocialkowski1-0/+1
The OV8865 is a 8 Mpx CMOS image sensor producing 3264x2448 at 30 fps. Other modes (including some with sub-sampling) are available too. It outputs 10-bit bayer CFA data through a MIPI CSI-2 interface with up to 4 lanes supported. Some register initialisation sequences are still needed for this driver, as they cover registers for which no documentation is available. This work is based on the first version of the driver submitted by Kévin L'hôpital, which was adapted to mainline from the Allwinner BSP. This version is a rewrite of the first version that matches the structure of the OV5648 driver, with explicit PLL configuration, all the necessary mode-specific fields, associatied registers and reduced static sequences. It was tested with the Banana Pi Camera Board v3 and the Banana Pi M3. Co-developed-by: Kévin L'hôpital <kevin.lhopital@bootlin.com> Signed-off-by: Kévin L'hôpital <kevin.lhopital@bootlin.com> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: i2c: Add support for the OV5648 image sensorPaul Kocialkowski1-0/+1
The OV5648 is a 5 Mpx CMOS image sensor, connected via MIPI CSI-2 in a one or two lane configuration. Most of the features of the hardware are supported, including: - Auto and manual exposition/gain - Auto and manual white balance - Horizontal and vertical flip - Test patterns But the following are still missing: - Debanding, based on power source frequency; - Exposition setting correlated to time units. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: smiapp-pll: Rename as ccs-pllSakari Ailus1-1/+1
MIPI CCS replaces SMIA and SMIA++ as the current standard. CCS brings new features while existing functionality will be supported. Rename the smiapp-pll as ccs-pll accordingly. Also add Intel copyright to the files. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-02media: i2c: add OV02A10 image sensor driverDongchun Zhu1-0/+1
Add a V4L2 sub-device driver for OmniVision OV02A10 image sensor. Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-02media: smiapp: Rename as "ccs"Sakari Ailus1-1/+1
Rename the "smiapp" driver as "ccs". MIPI CCS is the contemporary standard for raw Bayer camera sensors. The driver retains support for the SMIA++ and SMIA compliant camera sensors. A module alias is added for old user space using "smiapp" module name. Add Intel copyright while at it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-29 11:34:04 +0300