summaryrefslogtreecommitdiff
path: root/drivers/media/usb
AgeCommit message (Collapse)AuthorFilesLines
2023-02-26Merge tag 'media/v6.3-1' of ↵Linus Torvalds3-7/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Removal of several VB1-only deprecated drivers: cpia2, fsl-viu, meye, stkwebcam, tm6000, vpfe_capture and zr364xx - saa7146 recovered from staging/deprecated. We opted to give ti a chance, and, instead of deprecating it, the intention is to write patches migrating it from VB1 to VB2. - av7110 returned from staging/deprecated/ to staging/ as we're not planning on dropping it any time soon - media controller API has gained experimental support for G_ROUTING and streams API. No drivers use it right now. We're planning to add one after -rc1, giving some time to experience the API and eventually have changes during the next development cycle - New sensor drivers: imx296, imx415, ov8858 - Atomisp had lots of changes, specially on its sensor's interface, making atomisp sensor drivers closer to normal sensor drivers - media controller kAPI has gained some helpers to traverse pipelines - uvcvideo now better support power line control - lots of bug fixes, cleanups and driver improvements * tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (296 commits) media: imx-mipi-csis: Check csis_fmt validity before use media: v4l2-subdev.c: clear stream field media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line media: Revert "media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci" media: Revert "media: av7110: move to staging/media/deprecated/saa7146" media: imx-pxp: convert to regmap media: imx-pxp: Use non-threaded IRQ media: imx-pxp: Introduce pxp_read() and pxp_write() wrappers media: imx-pxp: Implement frame size enumeration media: imx-pxp: Pass pixel format value to find_format() media: imx-pxp: Add media controller support media: imx-pxp: Don't set bus_info manually in .querycap() media: imx-pxp: Sort headers alphabetically media: imx-pxp: add support for i.MX7D media: imx-pxp: make data_path_ctrl0 platform dependent media: imx-pxp: disable LUT block media: imx-pxp: explicitly disable unused blocks media: imx-pxp: extract helper function to setup data path media: imx-pxp: detect PXP version media: dt-bindings: media: fsl-pxp: convert to yaml ...
2023-02-08media: usb: siano: Fix use after free bugs caused by do_submit_urbDuoming Zhou1-0/+1
There are UAF bugs caused by do_submit_urb(). One of the KASan reports is shown below: [ 36.403605] BUG: KASAN: use-after-free in worker_thread+0x4a2/0x890 [ 36.406105] Read of size 8 at addr ffff8880059600e8 by task kworker/0:2/49 [ 36.408316] [ 36.408867] CPU: 0 PID: 49 Comm: kworker/0:2 Not tainted 6.2.0-rc3-15798-g5a41237ad1d4-dir8 [ 36.411696] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584 [ 36.416157] Workqueue: 0x0 (events) [ 36.417654] Call Trace: [ 36.418546] <TASK> [ 36.419320] dump_stack_lvl+0x96/0xd0 [ 36.420522] print_address_description+0x75/0x350 [ 36.421992] print_report+0x11b/0x250 [ 36.423174] ? _raw_spin_lock_irqsave+0x87/0xd0 [ 36.424806] ? __virt_addr_valid+0xcf/0x170 [ 36.426069] ? worker_thread+0x4a2/0x890 [ 36.427355] kasan_report+0x131/0x160 [ 36.428556] ? worker_thread+0x4a2/0x890 [ 36.430053] worker_thread+0x4a2/0x890 [ 36.431297] ? worker_clr_flags+0x90/0x90 [ 36.432479] kthread+0x166/0x190 [ 36.433493] ? kthread_blkcg+0x50/0x50 [ 36.434669] ret_from_fork+0x22/0x30 [ 36.435923] </TASK> [ 36.436684] [ 36.437215] Allocated by task 24: [ 36.438289] kasan_set_track+0x50/0x80 [ 36.439436] __kasan_kmalloc+0x89/0xa0 [ 36.440566] smsusb_probe+0x374/0xc90 [ 36.441920] usb_probe_interface+0x2d1/0x4c0 [ 36.443253] really_probe+0x1d5/0x580 [ 36.444539] __driver_probe_device+0xe3/0x130 [ 36.446085] driver_probe_device+0x49/0x220 [ 36.447423] __device_attach_driver+0x19e/0x1b0 [ 36.448931] bus_for_each_drv+0xcb/0x110 [ 36.450217] __device_attach+0x132/0x1f0 [ 36.451470] bus_probe_device+0x59/0xf0 [ 36.452563] device_add+0x4ec/0x7b0 [ 36.453830] usb_set_configuration+0xc63/0xe10 [ 36.455230] usb_generic_driver_probe+0x3b/0x80 [ 36.456166] printk: console [ttyGS0] disabled [ 36.456569] usb_probe_device+0x90/0x110 [ 36.459523] really_probe+0x1d5/0x580 [ 36.461027] __driver_probe_device+0xe3/0x130 [ 36.462465] driver_probe_device+0x49/0x220 [ 36.463847] __device_attach_driver+0x19e/0x1b0 [ 36.465229] bus_for_each_drv+0xcb/0x110 [ 36.466466] __device_attach+0x132/0x1f0 [ 36.467799] bus_probe_device+0x59/0xf0 [ 36.469010] device_add+0x4ec/0x7b0 [ 36.470125] usb_new_device+0x863/0xa00 [ 36.471374] hub_event+0x18c7/0x2220 [ 36.472746] process_one_work+0x34c/0x5b0 [ 36.474041] worker_thread+0x4b7/0x890 [ 36.475216] kthread+0x166/0x190 [ 36.476267] ret_from_fork+0x22/0x30 [ 36.477447] [ 36.478160] Freed by task 24: [ 36.479239] kasan_set_track+0x50/0x80 [ 36.480512] kasan_save_free_info+0x2b/0x40 [ 36.481808] ____kasan_slab_free+0x122/0x1a0 [ 36.483173] __kmem_cache_free+0xc4/0x200 [ 36.484563] smsusb_term_device+0xcd/0xf0 [ 36.485896] smsusb_probe+0xc85/0xc90 [ 36.486976] usb_probe_interface+0x2d1/0x4c0 [ 36.488303] really_probe+0x1d5/0x580 [ 36.489498] __driver_probe_device+0xe3/0x130 [ 36.491140] driver_probe_device+0x49/0x220 [ 36.492475] __device_attach_driver+0x19e/0x1b0 [ 36.493988] bus_for_each_drv+0xcb/0x110 [ 36.495171] __device_attach+0x132/0x1f0 [ 36.496617] bus_probe_device+0x59/0xf0 [ 36.497875] device_add+0x4ec/0x7b0 [ 36.498972] usb_set_configuration+0xc63/0xe10 [ 36.500264] usb_generic_driver_probe+0x3b/0x80 [ 36.501740] usb_probe_device+0x90/0x110 [ 36.503084] really_probe+0x1d5/0x580 [ 36.504241] __driver_probe_device+0xe3/0x130 [ 36.505548] driver_probe_device+0x49/0x220 [ 36.506766] __device_attach_driver+0x19e/0x1b0 [ 36.508368] bus_for_each_drv+0xcb/0x110 [ 36.509646] __device_attach+0x132/0x1f0 [ 36.510911] bus_probe_device+0x59/0xf0 [ 36.512103] device_add+0x4ec/0x7b0 [ 36.513215] usb_new_device+0x863/0xa00 [ 36.514736] hub_event+0x18c7/0x2220 [ 36.516130] process_one_work+0x34c/0x5b0 [ 36.517396] worker_thread+0x4b7/0x890 [ 36.518591] kthread+0x166/0x190 [ 36.519599] ret_from_fork+0x22/0x30 [ 36.520851] [ 36.521405] Last potentially related work creation: [ 36.523143] kasan_save_stack+0x3f/0x60 [ 36.524275] kasan_record_aux_stack_noalloc+0x9d/0xb0 [ 36.525831] insert_work+0x25/0x130 [ 36.527039] __queue_work+0x4d4/0x620 [ 36.528236] queue_work_on+0x72/0xb0 [ 36.529344] __usb_hcd_giveback_urb+0x13f/0x1b0 [ 36.530819] dummy_timer+0x350/0x1a40 [ 36.532149] call_timer_fn+0x2c/0x190 [ 36.533567] expire_timers+0x69/0x1f0 [ 36.534736] __run_timers+0x289/0x2d0 [ 36.535841] run_timer_softirq+0x2d/0x60 [ 36.537110] __do_softirq+0x116/0x380 [ 36.538377] [ 36.538950] Second to last potentially related work creation: [ 36.540855] kasan_save_stack+0x3f/0x60 [ 36.542084] kasan_record_aux_stack_noalloc+0x9d/0xb0 [ 36.543592] insert_work+0x25/0x130 [ 36.544891] __queue_work+0x4d4/0x620 [ 36.546168] queue_work_on+0x72/0xb0 [ 36.547328] __usb_hcd_giveback_urb+0x13f/0x1b0 [ 36.548805] dummy_timer+0x350/0x1a40 [ 36.550116] call_timer_fn+0x2c/0x190 [ 36.551570] expire_timers+0x69/0x1f0 [ 36.552762] __run_timers+0x289/0x2d0 [ 36.553916] run_timer_softirq+0x2d/0x60 [ 36.555118] __do_softirq+0x116/0x380 [ 36.556239] [ 36.556807] The buggy address belongs to the object at ffff888005960000 [ 36.556807] which belongs to the cache kmalloc-4k of size 4096 [ 36.560652] The buggy address is located 232 bytes inside of [ 36.560652] 4096-byte region [ffff888005960000, ffff888005961000) [ 36.564791] [ 36.565355] The buggy address belongs to the physical page: [ 36.567212] page:000000004f0a0731 refcount:1 mapcount:0 mapping:0000000000000000 index:0x00 [ 36.570534] head:000000004f0a0731 order:3 compound_mapcount:0 subpages_mapcount:0 compound0 [ 36.573717] flags: 0x100000000010200(slab|head|node=0|zone=1) [ 36.575481] raw: 0100000000010200 ffff888001042140 dead000000000122 0000000000000000 [ 36.577842] raw: 0000000000000000 0000000000040004 00000001ffffffff 0000000000000000 [ 36.580175] page dumped because: kasan: bad access detected [ 36.581994] [ 36.582548] Memory state around the buggy address: [ 36.583983] ffff88800595ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 36.586240] ffff888005960000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 36.588884] >ffff888005960080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 36.591071] ^ [ 36.593295] ffff888005960100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 36.595705] ffff888005960180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 36.598026] ================================================================== [ 36.600224] Disabling lock debugging due to kernel taint [ 36.602681] general protection fault, probably for non-canonical address 0x43600a000000060I [ 36.607129] CPU: 0 PID: 49 Comm: kworker/0:2 Tainted: G B 6.2.0-rc3-15798-8 [ 36.611115] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584 [ 36.615026] Workqueue: events do_submit_urb [ 36.616290] RIP: 0010:_raw_spin_lock_irqsave+0x8a/0xd0 [ 36.618107] Code: 24 00 00 00 00 48 89 df be 04 00 00 00 e8 9e b5 c6 fe 48 89 ef be 04 00 5 [ 36.623522] RSP: 0018:ffff888004b6fcf0 EFLAGS: 00010046 [ 36.625072] RAX: 0000000000000000 RBX: 043600a000000060 RCX: ffffffff9fc0e0d7 [ 36.627206] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff888004b6fcf0 [ 36.629813] RBP: ffff888004b6fcf0 R08: dffffc0000000000 R09: ffffed100096df9f [ 36.631974] R10: dfffe9100096dfa0 R11: 1ffff1100096df9e R12: ffff888005960020 [ 36.634285] R13: ffff8880059600f0 R14: 0000000000000246 R15: 0000000000000001 [ 36.636438] FS: 0000000000000000(0000) GS:ffff88806d600000(0000) knlGS:0000000000000000 [ 36.639092] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.640951] CR2: 00007f07476819a3 CR3: 0000000004a34000 CR4: 00000000000006f0 [ 36.643411] Call Trace: [ 36.644215] <TASK> [ 36.644902] smscore_getbuffer+0x3e/0x1e0 [ 36.646147] do_submit_urb+0x4f/0x190 [ 36.647449] process_one_work+0x34c/0x5b0 [ 36.648777] worker_thread+0x4b7/0x890 [ 36.649984] ? worker_clr_flags+0x90/0x90 [ 36.651166] kthread+0x166/0x190 [ 36.652151] ? kthread_blkcg+0x50/0x50 [ 36.653547] ret_from_fork+0x22/0x30 [ 36.655051] </TASK> [ 36.655733] Modules linked in: [ 36.656787] ---[ end trace 0000000000000000 ]--- [ 36.658328] RIP: 0010:_raw_spin_lock_irqsave+0x8a/0xd0 [ 36.660045] Code: 24 00 00 00 00 48 89 df be 04 00 00 00 e8 9e b5 c6 fe 48 89 ef be 04 00 5 [ 36.665730] RSP: 0018:ffff888004b6fcf0 EFLAGS: 00010046 [ 36.667448] RAX: 0000000000000000 RBX: 043600a000000060 RCX: ffffffff9fc0e0d7 [ 36.669675] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff888004b6fcf0 [ 36.672645] RBP: ffff888004b6fcf0 R08: dffffc0000000000 R09: ffffed100096df9f [ 36.674921] R10: dfffe9100096dfa0 R11: 1ffff1100096df9e R12: ffff888005960020 [ 36.677034] R13: ffff8880059600f0 R14: 0000000000000246 R15: 0000000000000001 [ 36.679184] FS: 0000000000000000(0000) GS:ffff88806d600000(0000) knlGS:0000000000000000 [ 36.681655] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.683383] CR2: 00007f07476819a3 CR3: 0000000004a34000 CR4: 00000000000006f0 [ 36.685733] Kernel panic - not syncing: Fatal exception [ 36.688585] Kernel Offset: 0x1d400000 from 0xffffffff81000000 (relocation range: 0xfffffff) [ 36.692199] ---[ end Kernel panic - not syncing: Fatal exception ]--- When the siano device is plugged in, it may call the following functions to initialize the device. smsusb_probe()-->smsusb_init_device()-->smscore_start_device(). When smscore_start_device() gets failed, the function smsusb_term_device() will be called and smsusb_device_t will be deallocated. Although we use usb_kill_urb() in smsusb_stop_streaming() to cancel transfer requests and wait for them to finish, the worker threads that are scheduled by smsusb_onresponse() may be still running. As a result, the UAF bugs could happen. We add cancel_work_sync() in smsusb_stop_streaming() in order that the worker threads could finish before the smsusb_device_t is deallocated. Fixes: dd47fbd40e6e ("[media] smsusb: don't sleep while atomic") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-08media: usb: dvb-usb-v2: af9015.c: return 0 instead of 'ret'.Hans Verkuil1-2/+2
Since 'ret' is known to be 0, just return '0'. This fixes two smatch warnings: af9015.c:1168 af9015_rc_query() warn: missing error code? 'ret' af9015.c:1177 af9015_rc_query() warn: missing error code? 'ret' Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: go7007: don't modify q->streamingHans Verkuil1-5/+1
The streaming state is maintained by the vb2 core, so drivers must never change it themselves. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-31usb: uvc: make uvc_format_desc table constMichael Grzeschik1-1/+1
Since the uvc_fmts array can not be modified we declare it const and change every user of the uvc_format_by_guid function aswell. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Tested-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20230126231456.3402323-5-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-31usb: uvc: move uvc_fmts and uvc_format_by_guid to own compile unitMichael Grzeschik1-0/+1
The media driver USB_VIDEO_CLASS and USB_F_UVC are using the same function uvc_format_by_guid. Since the function is inline, every user will get a copy of the used uvc_fmts array and the function. This patch moves the code to an own compile unit and add this dependency as UVC_COMMON to both users. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Tested-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20230126231456.3402323-4-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-31usb: uvc: move media/v4l2-uvc.h to usb/uvc.hMichael Grzeschik2-2/+2
Since the headerfile is only used in usb devices it is better placed with the other usb files. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Tested-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20230126231456.3402323-3-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-16media: uvcvideo: Silence memcpy() run-time false positive warningsKees Cook1-1/+3
The memcpy() in uvc_video_decode_meta() intentionally copies across the length and flags members and into the trailing buf flexible array. Split the copy so that the compiler can better reason about (the lack of) buffer overflows here. Avoid the run-time false positive warning: memcpy: detected field-spanning write (size 12) of single field "&meta->length" at drivers/media/usb/uvc/uvc_video.c:1355 (size 1) Additionally fix a typo in the documentation for struct uvc_meta_buf. Reported-by: ionut_n2001@yahoo.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=216810 Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Quirk for autosuspend in Logitech B910 and C910Ricardo Ribalda3-0/+30
Logitech B910 and C910 firmware are unable to recover from a USB autosuspend. When it resumes, the device is in a state where it only produces invalid frames. Eg: $ echo 0xFFFF > /sys/module/uvcvideo/parameters/trace # enable verbose log $ yavta -c1 -n1 --file='frame#.jpg' --format MJPEG --size=1920x1080 /dev/video1 [350438.435219] uvcvideo: uvc_v4l2_open [350438.529794] uvcvideo: Resuming interface 2 [350438.529801] uvcvideo: Resuming interface 3 [350438.529991] uvcvideo: Trying format 0x47504a4d (MJPG): 1920x1080. [350438.529996] uvcvideo: Using default frame interval 33333.3 us (30.0 fps). [350438.551496] uvcvideo: uvc_v4l2_mmap [350438.555890] uvcvideo: Device requested 3060 B/frame bandwidth. [350438.555896] uvcvideo: Selecting alternate setting 11 (3060 B/frame bandwidth). [350438.556362] uvcvideo: Allocated 5 URB buffers of 32x3060 bytes each. [350439.316468] uvcvideo: Marking buffer as bad (error bit set). [350439.316475] uvcvideo: Frame complete (EOF found). [350439.316477] uvcvideo: EOF in empty payload. [350439.316484] uvcvideo: frame 1 stats: 149/261/417 packets, 1/149/417 pts (early initial), 416/417 scr, last pts/stc/sof 2976325734/2978107243/249 [350439.384510] uvcvideo: Marking buffer as bad (error bit set). [350439.384516] uvcvideo: Frame complete (EOF found). [350439.384518] uvcvideo: EOF in empty payload. [350439.384525] uvcvideo: frame 2 stats: 265/379/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2979524454/2981305193/316 [350439.448472] uvcvideo: Marking buffer as bad (error bit set). [350439.448478] uvcvideo: Frame complete (EOF found). [350439.448480] uvcvideo: EOF in empty payload. [350439.448487] uvcvideo: frame 3 stats: 265/377/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2982723174/2984503144/382 ...(loop)... The devices can leave this invalid state if the alternate setting of the streaming interface is toggled. This patch adds a quirk for this device so it can be autosuspended properly. lsusb -v: Bus 001 Device 049: ID 046d:0821 Logitech, Inc. HD Webcam C910 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x046d Logitech, Inc. idProduct 0x0821 HD Webcam C910 bcdDevice 0.10 iManufacturer 0 iProduct 0 iSerial 1 390022B0 bNumConfigurations 1 Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Fix race condition with usb_kill_urbRicardo Ribalda3-0/+43
usb_kill_urb warranties that all the handlers are finished when it returns, but does not protect against threads that might be handling asynchronously the urb. For UVC, the function uvc_ctrl_status_event_async() takes care of control changes asynchronously. If the code is executed in the following order: CPU 0 CPU 1 ===== ===== uvc_status_complete() uvc_status_stop() uvc_ctrl_status_event_work() uvc_status_start() -> FAIL Then uvc_status_start will keep failing and this error will be shown: <4>[ 5.540139] URB 0000000000000000 submitted while active drivers/usb/core/urb.c:378 usb_submit_urb+0x4c3/0x528 Let's improve the current situation, by not re-submiting the urb if we are stopping the status event. Also process the queued work (if any) during stop. CPU 0 CPU 1 ===== ===== uvc_status_complete() uvc_status_stop() uvc_status_start() uvc_ctrl_status_event_work() -> FAIL Hopefully, with the usb layer protection this should be enough to cover all the cases. Cc: stable@vger.kernel.org Fixes: e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives") Reviewed-by: Yunke Cao <yunkec@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Use standard names for menusRicardo Ribalda3-64/+173
Instead of duplicating the menu info, use the one from the core. Also, do not use extra memory for 1:1 mappings. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Fix power line control for Lenovo Integrated CameraRicardo Ribalda3-1/+18
The device does not implement the power line frequenyc control correctly. It is a UVC 1.5 device, but implements the control as a UVC 1.1 device. Add the corresponding control mapping override. Bus 003 Device 002: ID 30c9:0093 Lenovo Integrated Camera Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.01 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x30c9 idProduct 0x0093 bcdDevice 0.07 iManufacturer 3 Lenovo iProduct 1 Integrated Camera iSerial 2 8SSC21J75356V1SR2830069 bNumConfigurations 1 Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Refactor power_line_frequency_controls_limitedRicardo Ribalda3-18/+14
Move the control mapping to uvc_ctrl.c. This way we do not have references to UVC controls or V4L2 controls in uvc_driver.c. This also fixes a bug introduced in commit 382075604a68 ("media: uvcvideo: Limit power line control for Quanta UVC Webcam"). The offending commit caused the power line control menu entries to have incorrect indices compared to the V4L2_CID_POWER_LINE_FREQUENCY_* enumeration. Now that the limited mapping reuses the correct menu_info array, the indices correctly map to the V4L2 control specification. Fixes: 382075604a68 ("media: uvcvideo: Limit power line control for Quanta UVC Webcam") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXXRicardo Ribalda1-37/+37
Convert the array of structs into an array of pointers, that way the mappings can be reused. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENURicardo Ribalda4-13/+29
Replace the count with a mask field that lets us choose not only the max value, but also the minimum value and what values are valid in between. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Extend documentation of uvc_video_clock_decode()Ricardo Ribalda1-1/+3
Make an explicit reference to UVC 1.5, explaining how the algorithm supports the different behaviour of UVC 1.1 and 1.5. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: HungNien Chen <hn.chen@sunplusit.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Limit power line control for Acer EasyCameraRicardo Ribalda1-0/+9
The device does not implement the power line control correctly. Add a corresponding control mapping override. Bus 003 Device 002: ID 5986:1180 Acer, Inc EasyCamera Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x5986 Acer, Inc idProduct 0x1180 bcdDevice 56.04 iManufacturer 3 Bison iProduct 1 EasyCamera iSerial 2 bNumConfigurations 1 Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Refactor __uvc_ctrl_add_mappingRicardo Ribalda1-11/+15
Simplify the exit code with a common error tag freeing all the memory. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Fix handling on Bitmask controlsRicardo Ribalda1-12/+40
Minimum and step values for V4L2_CTRL_TYPE_BITMASK controls should be 0. There is no need to query the camera firmware about this and maybe get invalid results. Also value should be masked to the max value advertised by the hardware. Finally, handle UVC 1.5 mask controls that use MAX instead of RES to describe the valid bits. Fixes v4l2-compliane: Control ioctls (Input 0): fail: v4l2-test-controls.cpp(97): minimum must be 0 for a bitmask control test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: FAIL Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Do not return positive errors in uvc_query_ctrl()Ricardo Ribalda1-1/+1
If the returned size of the query does not match the expected size or it is zero, return -EPIPE instead of 0 or a positive value. This will avoid confusing the caller (and ultimately userspace) that doesn't expect a positive or zero value. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Return -EACCES for Wrong state errorRicardo Ribalda1-1/+1
Error 2 is defined by UVC as: Wrong State: The device is in a state that disallows the specific request. The device will remain in this state until a specific action from the host or the user is completed. This is documented as happening when attempting to set the value of a manual control when the device is in auto mode. While V4L2 allows this, the closest error code defined by VIDIOC_S_CTRL is EACCES: EACCES: Attempt to set a read-only control or to get a write-only control. Or if there is an attempt to set an inactive control and the driver is not capable of caching the new value until the control is active again. Replace EILSEQ with EACCES. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Improve error logging in uvc_query_ctrl()Hans Verkuil1-5/+6
Standard use of the driver may result in error messages on the kernel log. This can hide other more important messages, and alert unnecessarily the user. Let's keep dev_err() for the important occasions. If __uvc_query_ctrl() failed with a non -EPIPE error, then report that with dev_err. If an error code is obtained, then report that with dev_dbg. Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()Hans Verkuil3-4/+44
Check for inactive controls in uvc_ctrl_is_accessible(). Use the new value for the master_id controls if present, otherwise use the existing value to determine if it is OK to set the control. Doing this here avoids attempting to set an inactive control, which will return an error from the USB device, which returns an invalid errorcode. This fixes: warn: v4l2-test-controls.cpp(483): s_ctrl returned EIO   warn: v4l2-test-controls.cpp(483): s_ctrl returned EIO test VIDIOC_G/S_CTRL: OK   warn: v4l2-test-controls.cpp(739): s_ext_ctrls returned EIO   warn: v4l2-test-controls.cpp(739): s_ext_ctrls returned EIO   warn: v4l2-test-controls.cpp(816): s_ext_ctrls returned EIO test VIDIOC_G/S/TRY_EXT_CTRLS: OK Tested with: v4l2-ctl -c auto_exposure=1 OK v4l2-ctl -c exposure_time_absolute=251 OK v4l2-ctl -c auto_exposure=3 OK v4l2-ctl -c exposure_time_absolute=251 VIDIOC_S_EXT_CTRLS: failed: Input/output error exposure_time_absolute: Input/output error ERROR v4l2-ctl -c auto_exposure=3,exposure_time_absolute=251,auto_exposure=1 v4l2-ctl -C auto_exposure,exposure_time_absolute   auto_exposure: 1 exposure_time_absolute: 251 Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Factor out usb_string() callsLaurent Pinchart1-24/+35
When parsing UVC descriptors to instantiate entities, the driver calls usb_string() to retrieve the entity name from the device, and falls back to a default name if the string can't be retrieved. This code pattern occurs multiple times. Factor it out to a separate helper function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2023-01-16media: uvcvideo: Limit power line control for Acer EasyCameraRicardo Ribalda1-0/+9
The device does not implement the power line control correctly. Add a corresponding control mapping override. Bus 003 Device 002: ID 5986:1180 Acer, Inc EasyCamera Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x5986 Acer, Inc idProduct 0x1180 bcdDevice 56.04 iManufacturer 3 Bison iProduct 1 EasyCamera iSerial 2 bNumConfigurations 1 Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Recover stalled ElGato devicesRicardo Ribalda1-4/+20
Elgato Cam Link 4k can be in a stalled state if the resolution of the external source has changed while the firmware initializes. Once in this state, the device is useless until it receives a USB reset. It has even been observed that the stalled state will continue even after unplugging the device. lsusb -v Bus 002 Device 002: ID 0fd9:0066 Elgato Systems GmbH Cam Link 4K Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 9 idVendor 0x0fd9 Elgato Systems GmbH idProduct 0x0066 bcdDevice 0.00 iManufacturer 1 Elgato iProduct 2 Cam Link 4K iSerial 4 0005AC52FE000 bNumConfigurations 1 Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Remove void casting for the status endpointRicardo Ribalda2-46/+44
Make the code more resilient, by replacing the castings with proper structure definitions and using offsetof() instead of open coding the location of the data. Suggested-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Fix usage of symbolic permissions to octalPedro Guilherme Siqueira Moreira1-6/+6
Change symbolic permissions to octal equivalents as recommended by scripts/checkpatch.pl on drivers/media/usb/uvc/uvc_driver.c. Signed-off-by: Pedro Guilherme Siqueira Moreira <pedro.guilherme@espectro.eng.br> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Fix assignment inside if conditionPedro Guilherme Siqueira Moreira1-2/+4
Fixes 'do not use assignment in if condition' errors issued by scripts/checkpatch.pl on drivers/media/usb/uvc/uvc_driver.c Signed-off-by: Pedro Guilherme Siqueira Moreira <pedro.guilherme@espectro.eng.br> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Fix missing newline after declarationsPedro Guilherme Siqueira Moreira1-0/+4
Fixes 'Missing a blank line after declarations' warning issued by scripts/checkpatch.pl on drivers/media/usb/uvc/uvc_driver.c Signed-off-by: Pedro Guilherme Siqueira Moreira <pedro.guilherme@espectro.eng.br> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Handle errors from calls to usb_stringGuenter Roeck1-29/+19
On a Webcam from Quanta, we see the following error. usb 3-5: New USB device found, idVendor=0408, idProduct=30d2, bcdDevice= 0.03 usb 3-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 usb 3-5: Product: USB2.0 HD UVC WebCam usb 3-5: Manufacturer: Quanta usb 3-5: SerialNumber: 0x0001 ... uvcvideo: Found UVC 1.10 device USB2.0 HD UVC WebCam (0408:30d2) uvcvideo: Failed to initialize entity for entity 5 uvcvideo: Failed to register entities (-22). The Webcam reports an entity of type UVC_VC_EXTENSION_UNIT. It reports a string index of '7' associated with that entity. The attempt to read that string from the camera fails with error -32 (-EPIPE). usb_string() returns that error, but it is ignored. As result, the entity name is empty. This later causes v4l2_device_register_subdev() to return -EINVAL, and no entities are registered as result. While this appears to be a firmware problem with the camera, the kernel should still handle the situation gracefully. To do that, check the return value from usb_string(). If it reports an error, assign the entity's default name. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Only create input devs if hw supports itRicardo Ribalda1-0/+23
Examine the stream headers to figure out if the device has a button and can be used as an input. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Handle cameras with invalid descriptorsRicardo Ribalda1-1/+1
If the source entity does not contain any pads, do not create a link. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16media: uvcvideo: Remove format descriptionsLaurent Pinchart3-26/+2
The V4L2 core overwrites format descriptions in v4l_fill_fmtdesc(), there's no need to manually set the descriptions in the driver. This prepares for removal of the format descriptions from the uvc_fmts table. Unlike V4L2, UVC makes a distinction between the SD-DV, SDL-DV and HD-DV formats. It also indicates whether the DV format uses 50Hz or 60Hz. This information is parsed by the driver to construct a format name string that is printed in a debug message, but serves no other purpose as V4L2 has a single V4L2_PIX_FMT_DV pixel format that covers all those cases. As the information is available in the UVC descriptors, and thus accessible to users with lsusb if they really care, don't log it in a debug message and drop the format name string to simplify the code. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
2022-12-26treewide: Convert del_timer*() to timer_shutdown*()Steven Rostedt (Google)2-10/+10
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-07Merge tag 'br-v6.2i' of git://linuxtv.org/hverkuil/media_tree into media_stageMauro Carvalho Chehab2-7/+4
Tag branch Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> * tag 'br-v6.2i' of git://linuxtv.org/hverkuil/media_tree: (31 commits) media: s5c73m3: Switch to GPIO descriptors media: i2c: s5k5baf: switch to using gpiod API media: i2c: s5k6a3: switch to using gpiod API media: imx: remove code for non-existing config IMX_GPT_ICAP media: si470x: Fix use-after-free in si470x_int_in_callback() media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies media: coda: Add check for kmalloc media: coda: Add check for dcoda_iram_alloc dt-bindings: media: s5c73m3: Fix reset-gpio descriptor media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property media: s5k4ecgx: Delete driver media: s5k4ecgx: Switch to GPIO descriptors media: Switch to use dev_err_probe() helper headers: Remove some left-over license text in include/uapi/linux/v4l2-* headers: Remove some left-over license text in include/uapi/linux/dvb/ media: usb: pwc-uncompress: Use flex array destination for memcpy() media: s5p-mfc: Fix to handle reference queue during finishing media: s5p-mfc: Clear workbit to handle error condition media: s5p-mfc: Fix in register read and write for H264 media: imx: Use get_mbus_config instead of parsing upstream DT endpoints ...
2022-12-07media: Switch to use dev_err_probe() helperYang Yingliang1-6/+3
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER. Reviewed-by: Sean Young <sean@mess.org> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-12-07media: usb: pwc-uncompress: Use flex array destination for memcpy()Gustavo A. R. Silva1-1/+1
In preparation for FORTIFY_SOURCE performing run-time destination buffer bounds checking for memcpy(), specify the destination output buffer explicitly, instead of asking memcpy() to write past the end of what looked like a fixed-size object. Notice that raw_frame is a pointer to a structure that contains flexible-array member rawframe[]: drivers/media/usb/pwc/pwc.h: 190 struct pwc_raw_frame { 191 __le16 type; /* type of the webcam */ 192 __le16 vbandlength; /* Size of 4 lines compressed (used by the 193 decompressor) */ 194 __u8 cmd[4]; /* the four byte of the command (in case of 195 nala, only the first 3 bytes is filled) */ 196 __u8 rawframe[]; /* frame_size = H / 4 * vbandlength */ 197 } __packed; Link: https://github.com/KSPP/linux/issues/200 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-12-02media: dvb-usb: m920x: make read-only arrays static constColin Ian King1-8/+8
Don't populate the arrays on the stack, instead make them static const. Also makes the object code smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-11-25media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()Baisong Zhong1-0/+4
Wei Chen reports a kernel bug as blew: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] ... Call Trace: <TASK> __i2c_transfer+0x77e/0x1930 drivers/i2c/i2c-core-base.c:2109 i2c_transfer+0x1d5/0x3d0 drivers/i2c/i2c-core-base.c:2170 i2cdev_ioctl_rdwr+0x393/0x660 drivers/i2c/i2c-dev.c:297 i2cdev_ioctl+0x75d/0x9f0 drivers/i2c/i2c-dev.c:458 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fd834a8bded In az6027_i2c_xfer(), if msg[i].addr is 0x99, a null-ptr-deref will caused when accessing msg[i].buf. For msg[i].len is 0 and msg[i].buf is null. Fix this by checking msg[i].len in az6027_i2c_xfer(). Link: https://lore.kernel.org/lkml/CAO4mrfcPHB5aQJO=mpqV+p8mPLNg-Fok0gw8gZ=zemAfMGTzMg@mail.gmail.com/ Link: https://lore.kernel.org/linux-media/20221120065918.2160782-1-zhongbaisong@huawei.com Fixes: 76f9a820c867 ("V4L/DVB: AZ6027: Initial import of the driver") Reported-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-25media: dvb-usb: dib0700_devices: Remove unused struct dibx090p_adcYuan Can1-7/+0
After commit 5e9c85d98337("[media] dib8096: enhancement"), no one use struct dibx090p_adc, so remove it. Link: https://lore.kernel.org/linux-media/20220927133827.99097-1-yuancan@huawei.com Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-25media: dib0700: remove orphan dvb_usb_dib0700_ir_proto declarationGaosheng Cui1-1/+0
The dvb_usb_dib0700_ir_proto has been removed by commit 0ffd1ab34a00 ("V4L/DVB: dib0700: properly implement IR change_protocol"), so remove the orphan declaration. Link: https://lore.kernel.org/linux-media/20220920015902.785337-1-cuigaosheng1@huawei.com Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-25media: dvb-usb: fix memory leak in dvb_usb_adapter_init()Mazin Al Haddad1-1/+3
Syzbot reports a memory leak in "dvb_usb_adapter_init()". The leak is due to not accounting for and freeing current iteration's adapter->priv in case of an error. Currently if an error occurs, it will exit before incrementing "num_adapters_initalized", which is used as a reference counter to free all adap->priv in "dvb_usb_adapter_exit()". There are multiple error paths that can exit from before incrementing the counter. Including the error handling paths for "dvb_usb_adapter_stream_init()", "dvb_usb_adapter_dvb_init()" and "dvb_usb_adapter_frontend_init()" within "dvb_usb_adapter_init()". This means that in case of an error in any of these functions the current iteration is not accounted for and the current iteration's adap->priv is not freed. Fix this by freeing the current iteration's adap->priv in the "stream_init_err:" label in the error path. The rest of the (accounted for) adap->priv objects are freed in dvb_usb_adapter_exit() as expected using the num_adapters_initalized variable. Syzbot report: BUG: memory leak unreferenced object 0xffff8881172f1a00 (size 512): comm "kworker/0:2", pid 139, jiffies 4294994873 (age 10.960s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff844af012>] dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:75 [inline] [<ffffffff844af012>] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:184 [inline] [<ffffffff844af012>] dvb_usb_device_init.cold+0x4e5/0x79e drivers/media/usb/dvb-usb/dvb-usb-init.c:308 [<ffffffff830db21d>] dib0700_probe+0x8d/0x1b0 drivers/media/usb/dvb-usb/dib0700_core.c:883 [<ffffffff82d3fdc7>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline] [<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621 [<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline] [<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752 [<ffffffff8274af6a>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:782 [<ffffffff8274b786>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:899 [<ffffffff82747c87>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [<ffffffff8274b352>] __device_attach+0x122/0x260 drivers/base/dd.c:970 [<ffffffff827498f6>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487 [<ffffffff82745cdb>] device_add+0x5fb/0xdf0 drivers/base/core.c:3405 [<ffffffff82d3d202>] usb_set_configuration+0x8f2/0xb80 drivers/usb/core/message.c:2170 [<ffffffff82d4dbfc>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 [<ffffffff82d3f49c>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293 [<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline] [<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621 [<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline] [<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752 Link: https://syzkaller.appspot.com/bug?extid=f66dd31987e6740657be Reported-and-tested-by: syzbot+f66dd31987e6740657be@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-media/20220824012152.539788-1-mazinalhaddad05@gmail.com Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-25media: dvb-core: Enhance shared multi-frontend supportRobert Schlabbach1-1/+1
Drivers for devices with multiple frontends which cannot be used concurrently due to hardware limitations which enforce that restriction by setting the mfe_shared field to 1 exhibit rather unfriendly behavior towards applications: The unavailable frontend devices cannot be opened at all, not even for read-only access to query information. Even worse, any open call is blocked for 5 seconds by default. Allow drivers for such devices to behave like regular busy frontend devices instead, i.e. still allowing concurrent read access to the unavailable frontend and denying concurrent write access with -EBUSY without delay. This patch does not alter the behavior of any existing driver to avoid regressions. Driver developers who wish to take advantage of this must ensure their driver can handle all read-only accesses to the unavailable frontend, and indicate the capability by setting the mfe_shared field to 2 instead of 1. Add a check to dvb-usb-init.c when automatically setting the mfe_shared field that when a driver has already set the field to 2, it is not overwritten. Document the additional capability in the code comment about mfe_shared. Link: https://lore.kernel.org/linux-media/trinity-22c77578-26b0-4867-9ff7-2668e5d22c64-1642799929896@3c-app-gmx-bap04 Signed-off-by: Robert Schlabbach <robert_s@gmx.net> Tested-by: Robert Schlabbach <robert_s@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-25media: dvb-frontends: a8293: fix LNB powerup failure in PCTV 461eChuck Ritola1-0/+6
Fixes a8293 failure to raise LNB voltage in PCTV 461e DVB-S2 Stick affecting multiple users over several years as found here: http://www.linuxquestions.org/questions/linux-hardware-18/pctv-dvb-s2-stick-461e-not-feeding-lnb-4175529374/ https://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_DVB-S2_Stick_(461e) https://github.com/OpenELEC/OpenELEC.tv/issues/3731 Caused by vIN undervoltage lockout (status register bit 7) when raising LNB to 18V. Addressed by using the higher-precision voltages available on the a8293 to gradually increase (slew) the voltage when voltage increases are requested. Adds volt_slew_nanos_per_mv to a8293_platform_data struct for specifying slew rate. If value is <1 or non-sane (>1600), the original no-slew version for a8293_set_voltage is used. Link: https://lore.kernel.org/linux-media/20211231035326.6759-1-cjritola@gmail.com [mchehab: fixed some coding style issues] Signed-off-by: Chuck Ritola <cjritola@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-25Merge tag 'br-v6.2g' of git://linuxtv.org/hverkuil/media_tree into media_stageMauro Carvalho Chehab1-3/+2
Despite being big, the changes here are trivial: they just change the probing method for I2C. So, apply it as a merge. Tag branch * tag 'br-v6.2g' of git://linuxtv.org/hverkuil/media_tree: (96 commits) media: v4l2-core/tuner-core: Convert to i2c's .probe_new() media: usb: go7007: s2250-board: Convert to i2c's .probe_new() media: tuners/tua9001: Convert to i2c's .probe_new() media: tuners/tda18250: Convert to i2c's .probe_new() media: tuners/tda18212: Convert to i2c's .probe_new() media: tuners/qm1d1c0042: Convert to i2c's .probe_new() media: tuners/qm1d1b0004: Convert to i2c's .probe_new() media: tuners/mxl301rf: Convert to i2c's .probe_new() media: tuners/mt2060: Convert to i2c's .probe_new() media: tuners/m88rs6000t: Convert to i2c's .probe_new() media: tuners/fc2580: Convert to i2c's .probe_new() media: tuners/e4000: Convert to i2c's .probe_new() media: vidtv: Convert to i2c's .probe_new() media: radio/tef6862: Convert to i2c's .probe_new() media: radio/saa7706h: Convert to i2c's .probe_new() media: radio/radio-tea5764: Convert to i2c's .probe_new() media: i2c/wm8775: Convert to i2c's .probe_new() media: i2c/wm8739: Convert to i2c's .probe_new() media: i2c/vs6624: Convert to i2c's .probe_new() media: i2c/vpx3220: Convert to i2c's .probe_new() ... Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-25media: vb2/au0828: move the v4l_vb2q_enable_media_source to the au0828 driverHans Verkuil2-0/+3
With the new prepare_streaming op it is possible to move the ugly v4l_vb2q_enable_media_source() call in vb2_core_streamon to the driver. It was called incorrectly in vb2 as well: it was only called if sufficient buffers were queued at STREAMON time, but not if more buffers were queued later. This was not an issue with the au0828 driver since it never set min_buffers_needed. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-21media: usb: go7007: s2250-board: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-23Merge tag 'media/v6.1-2' of ↵Linus Torvalds3-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull missed media updates from Mauro Carvalho Chehab: "It seems I screwed-up my previous pull request: it ends up that only half of the media patches that were in linux-next got merged in -rc1. The script which creates the signed tags silently failed due to 5.19->6.0 so it ended generating a tag with incomplete stuff. So here are the missing parts: - a DVB core security fix - lots of fixes and cleanups for atomisp staging driver - old drivers that are VB1 are being moved to staging to be deprecated - several driver updates - mostly for embedded systems, but there are also some things addressing issues with some PC webcams, in the UVC video driver" * tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits) media: sun6i-csi: Move csi buffer definition to main header file media: sun6i-csi: Introduce and use video helper functions media: sun6i-csi: Add media ops with link notify callback media: sun6i-csi: Remove controls handler from the driver media: sun6i-csi: Register the media device after creation media: sun6i-csi: Pass and store csi device directly in video code media: sun6i-csi: Tidy up video code media: sun6i-csi: Tidy up v4l2 code media: sun6i-csi: Tidy up Kconfig media: sun6i-csi: Use runtime pm for clocks and reset media: sun6i-csi: Define and use variant to get module clock rate media: sun6i-csi: Always set exclusive module clock rate media: sun6i-csi: Tidy up platform code media: sun6i-csi: Refactor main driver data structures media: sun6i-csi: Define and use driver name and (reworked) description media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER ...
2022-10-08Merge tag 'usb-6.1-rc1' of ↵Linus Torvalds5-451/+23
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1. Nothing major in here, lots of little things with new devices supported and updates for a few drivers. Highlights include: - thunderbolt/USB4 devices supported a bit better than before, and some new ids to enable new hardware devices - USB gadget uvc updates for newer video formats and better v4l integration (the v4l portions were acked by those maintainers) - typec updates for tiny issues and more typec drivers for new chips. - xhci tiny updates for minor issues - big usb-serial ftdi_sio driver update to handle new devices better - lots of tiny dwc3 fixes and updates for the IP block that is showing up everywhere these days - dts updates for new devices being supported - other tiny janitorial and cleanups fixes for lots of different USB drivers. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: gadget: uvc: don't put item still in use usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video() usb: host: ehci-exynos: switch to using gpiod API Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present" Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"" dt-bindings: usb: Convert FOTG210 to dt schema usb: mtu3: fix failed runtime suspend in host only mode USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl" usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra usb: typec: Replace custom implementation of device_match_fwnode() usb: typec: ucsi: Don't warn on probe deferral usb: add quirks for Lenovo OneLink+ Dock MAINTAINERS: switch dwc3 to Thinh usb: idmouse: fix an uninit-value in idmouse_open USB: PHY: JZ4770: Switch to use dev_err_probe() helper usb: phy: generic: Switch to use dev_err_probe() helper usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs usb: cdns3: remove dead code usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair usb: musb: sunxi: Switch to use dev_err_probe() helper ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-13 20:02:46 +0300