summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2017-07-10Merge tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds9-16/+103
Pull drm updates from Dave Airlie: "This is the main pull request for the drm, I think I've got one later driver pull for mediatek SoC driver, I'm undecided on if it needs to go to you yet. Otherwise summary below: Core drm: - Atomic add driver private objects - Deprecate preclose hook in modern drivers - MST bandwidth tracking - Use kvmalloc in more places - Add mode_valid hook for crtc/encoder/bridge - Reduce sync_file construction time - Documentation updates - New DRM synchronisation object support New drivers: - pl111 - pl111 CLCD display controller Panel: - Innolux P079ZCA panel driver - Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels - panel-samsung-s6e3ha2: Add s6e3hf2 panel support i915: - SKL+ watermark fixes - G4x/G33 reset improvements - DP AUX backlight improvements - Buffer based GuC/host communication - New getparam for (sub)slice infomation - Cannonlake and Coffeelake initial patches - Execbuf optimisations radeon/amdgpu: - Lots of Vega10 bug fixes - Preliminary raven support - KIQ support for compute rings - MEC queue management rework - DCE6 Audio support - SR-IOV improvements - Better radeon/amdgpu selection support nouveau: - HDMI stereoscopic support - Display code rework for >= GM20x GPUs msm: - GEM rework for fine-grained locking - Per-process pagetable work - HDMI fixes for Snapdragon 820. vc4: - Remove 256MB CMA limit from vc4 - Add out-fence support - Add support for cygnus - Get/set tiling ioctls support - Add T-format tiling support for scanout zte: - add VGA support. etnaviv: - Thermal throttle support for newer GPUs - Restore userspace buffer cache performance - dma-buf sync fix stm: - add stm32f429 display support exynos: - Rework vblank handling - Fixup sw-trigger code sun4i: - V3s display engine support - HDMI support for older SoCs - Preliminary work on dual-pipeline SoCs. rcar-du: - VSP work imx-drm: - Remove counter load enable from PRE - Double read/write reduction flag support tegra: - Documentation for the host1x and drm driver. - Lots of staging ioctl fixes due to grate project work. omapdrm: - dma-buf fence support - TILER rotation fixes" * tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits) drm: Remove unused drm_file parameter to drm_syncobj_replace_fence() drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu. amdgpu: Set cik/si_support to 1 by default if radeon isn't built drm/amdgpu/gfx9: fix driver reload with KIQ drm/amdgpu/gfx8: fix driver reload with KIQ drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay drm/ttm: Fix use-after-free in ttm_bo_clean_mm drm/amd/amdgpu: move get memory type function from early init to sw init drm/amdgpu/cgs: always set reference clock in mode_info drm/amdgpu: fix vblank_time when displays are off drm/amd/powerplay: power value format change for Vega10 drm/amdgpu/gfx9: support the amdgpu.disable_cu option drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10 drm/amdgpu: Make amdgpu_cs_parser_init static (v2) drm/amdgpu/cs: fix a typo in a comment drm/amdgpu: Fix the exported always on CU bitmap drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup drm/amd/powerplay/cz: print message if smc message fails drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init ...
2017-07-06Merge tag 'media/v4.13-1' of ↵Linus Torvalds227-4228/+28874
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - addition of fwnode support at V4L2 core - addition of a few more SDR formats - new imx driver to support i.MX6 cameras - new driver for Qualcon venus codecs - new I2C sensor drivers: dw9714, max2175, ov13858, ov5640 - new CEC driver: stm32-cec - some improvements to DVB frontend documentation and a few fixups - several driver improvements and fixups * tag 'media/v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (361 commits) [media] media: entity: Catch unbalanced media_pipeline_stop calls [media] media/uapi/v4l: clarify cropcap/crop/selection behavior [media] v4l2-ioctl/exynos: fix G/S_SELECTION's type handling [media] vimc: sen: Declare vimc_sen_video_ops as static [media] vimc: sca: Add scaler [media] vimc: deb: Add debayer filter [media] vimc: Subdevices as modules [media] vimc: cap: Support several image formats [media] vimc: sen: Support several image formats [media] vimc: common: Add vimc_colorimetry_clamp [media] vimc: common: Add vimc_link_validate [media] vimc: common: Add vimc_pipeline_s_stream helper [media] vimc: common: Add vimc_ent_sd_* helper [media] vimc: Move common code from the core [media] vimc: sen: Integrate the tpg on the sensor [media] media: i2c: ov772x: Force use of SCCB protocol [media] dvb uapi docs: enums are passed by value, not reference [media] dvb: don't use 'time_t' in event ioctl [media] media: venus: enable building with COMPILE_TEST [media] af9013: refactor power control ...
2017-07-06Merge tag 'sound-4.13-rc1' of ↵Linus Torvalds1-8/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This development cycle resulted in a fair amount of changes in both core and driver sides. The most significant change in ALSA core is about PCM. Also the support of of-graph card and the new DAPM widget for DSP are noteworthy changes in ASoC core. And there're lots of small changes splat over the tree, as you can see in diffstat. Below are a few highlights: ALSA core: - Removal of set_fs() hackery from PCM core stuff, and the code reorganization / optimization thereafter - Improved support of PCM ack ops, and a new ABI for improved control/status mmap handling - Lots of constifications in various codes ASoC core: - The support of of-graph card, which may work as a better generic device for a replacement of simple-card - New widget types intended mainly for use with DSPs ASoC drivers: - New drivers for Allwinner V3s SoCs - Ensonic ES8316 codec support - More Intel SKL and KBL works - More device support for Intel SST Atom (mostly for cheap tablets and 2-in-1 devices) - Support for Rockchip PDM controllers - Support for STM32 I2S and S/PDIF controllers - Support for ZTE AUD96P22 codecs HD-audio: - Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks for HP and Dell machines - A few more fixes for i915 component binding" * tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (418 commits) ALSA: hda - Fix unbalance of i915 module refcount ASoC: Intel: Skylake: Remove driver debugfs exit ASoC: Intel: Skylake: explicitly add the headers sst-dsp.h ALSA: hda/realtek - Remove GPIO_MASK ALSA: hda/realtek - Fix typo of pincfg for Dell quirk ALSA: pcm: add a documentation for tracepoints ALSA: atmel: ac97c: fix error return code in atmel_ac97c_probe() ALSA: x86: fix error return code in hdmi_lpe_audio_probe() ASoC: Intel: Skylake: Add support to read firmware registers ASoC: Intel: Skylake: Add sram address to sst_addr structure ASoC: Intel: Skylake: Debugfs facility to dump module config ASoC: Intel: Skylake: Add debugfs support ASoC: fix semicolon.cocci warnings ASoC: rt5645: Add quirk override by module option ASoC: rsnd: make arrays path and cmd_case static const ASoC: audio-graph-card: add widgets and routing for external amplifier support ASoC: audio-graph-card: update bindings for amplifier support ASoC: rt5665: calibration should be done before jack detection ASoC: rsnd: constify dev_pm_ops structures. ASoC: nau8825: change crosstalk-bypass property to bool type ...
2017-07-03Merge tag 'asoc-v4.13' of ↵Takashi Iwai20-59/+64
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.13 The big news with this release is the of-graph card, this provides a replacement for simple-card that is much more flexibile and scalable, allowing many more systems to use a generic sound card than was possible before: - The of-graph card, finally merged after a long and dedicated effort by Morimoto-san. - New widget types intended mainly for use with DSPs. - New drivers for Allwinner V3s SoCs, Ensonic ES8316, several classes of x86 machine, Rockchip PDM controllers, STM32 I2S and S/PDIF controllers and ZTE AUD96P22 CODECs.
2017-06-27Backmerge tag 'v4.12-rc7' into drm-nextDave Airlie6-9/+11
Linux 4.12-rc7 Needed at least rc6 for drm-misc-next-fixes, may as well go to rc7
2017-06-23[media] media: entity: Catch unbalanced media_pipeline_stop callsKieran Bingham1-1/+6
Drivers must not perform unbalanced calls to stop the entity pipeline, however if they do they will fault in the core media code, as the entity->pipe will be set as NULL. We handle this gracefully in the core with a WARN for the developer. Replace the erroneous check on zero streaming counts, with a check on NULL pipe elements instead, as this is the symptom of unbalanced media_pipeline_stop calls. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pincharts@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-23[media] v4l2-ioctl/exynos: fix G/S_SELECTION's type handlingHans Verkuil5-16/+57
The type field in struct v4l2_selection is supposed to never use the _MPLANE variants. E.g. if the driver supports V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, then userspace should still pass V4L2_BUF_TYPE_VIDEO_CAPTURE. The reasons for this are lost in the mists of time, but it is really annoying. In addition, the exynos drivers didn't follow this rule and instead expected the _MPLANE type. To fix that code is added to the v4l2 core that maps the _MPLANE buffer types to their regular equivalents before calling the driver. Effectively this allows for userspace to use either _MPLANE or the regular buffer type. This keeps backwards compatibility while making things easier for userspace. Since drivers now never see the _MPLANE buffer types the exynos drivers had to be adapted as well. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-23[media] vimc: sen: Declare vimc_sen_video_ops as staticHelen Fornazier1-1/+1
Declare vimc_sen_video_ops as static, remove warning from sparse tool Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-23[media] vimc: sca: Add scalerHelen Fornazier4-1/+485
Implement scaler and integrated with the core Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-23[media] vimc: deb: Add debayer filterHelen Fornazier3-1/+606
Implement the debayer filter and integrate it with the core Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-23[media] vimc: Subdevices as modulesHelen Fornazier8-388/+339
Change the core structure for adding subdevices in the topology. Instead of calling the specific create function for each subdevice, inject a child platform_device with the driver's name. Each type of node in the topology (sensor, capture, debayer, scaler) will register a platform_driver with the corresponding name through the component subsystem. Implementing a new subdevice type doesn't require vimc-core to be altered. This facilitates future implementation of dynamic entities, where hotpluging an entity in the topology is just a matter of registering/unregistering a platform_device in the system. It also facilitates other implementations of different nodes without touching the core code and remove the need of a header file for each type of node. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-23[media] vimc: cap: Support several image formatsHelen Fornazier1-16/+101
Allow user space to change the image format as the frame size, the pixel format, colorspace, quantization, field YCbCr encoding and the transfer function Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-23[media] vimc: sen: Support several image formatsHelen Fornazier3-29/+121
Allow user space to change the image format as the frame size, the media bus pixel format, colorspace, quantization, field YCbCr encoding and the transfer function Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-23[media] vimc: common: Add vimc_colorimetry_clampHelen Fornazier1-0/+26
Colorimetry value will always be checked in the same way. Adding a helper macro for that Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-23[media] vimc: common: Add vimc_link_validateHelen Fornazier3-68/+145
All links will be checked in the same way. Adding a helper function for that Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-23[media] vimc: common: Add vimc_pipeline_s_stream helperHelen Fornazier3-27/+45
Move the vimc_cap_pipeline_s_stream from the vimc-cap.c to vimc-common.c as this core will be reused by other subdevices to activate the stream in their directly connected nodes Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-23[media] vimc: common: Add vimc_ent_sd_* helperHelen Fornazier3-49/+114
As all the subdevices in the topology will be initialized in the same way, to avoid code repetition the vimc_ent_sd_{register, unregister} helper functions were created Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-23[media] vimc: Move common code from the coreHelen Fornazier6-210/+229
Remove helper functions from vimc-core and add it in vimc-common to clean up the core. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-23[media] vimc: sen: Integrate the tpg on the sensorHelen Fornazier2-13/+52
Initialize the test pattern generator on the sensor Generate a colored bar image instead of a grey one Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-23[media] media: i2c: ov772x: Force use of SCCB protocolJacopo Mondi1-2/+4
Commit e78902976150 ("i2c: sh_mobile: don't send a stop condition by default inside transfers") makes the i2c_sh_mobile I2C-adapter emit a stop/start sequence between messages in a single transfer only when explicitly requested with I2C_M_STOP. This breaks the ov772x driver in the SH4 Migo-R board as the Omnivision sensor uses the I2C-like SCCB protocol that doesn't support repeated starts: i2c-sh_mobile i2c-sh_mobile.0: Transfer request timed out ov772x 0-0021: Product ID error 92:92 Fix it by marking the client as SCCB, forcing the emission of a stop/start sequence between all messages. As I2C_M_STOP requires the I2C adapter to support protocol mangling, ensure that the I2C_FUNC_PROTOCOL_MANGLING functionality is available. Tested on SH4 Migo-R board, with OV772x now successfully probing soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0 ov772x 0-0021: ov7725 Product ID 77:21 Manufacturer ID 7f:a2 Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] media: venus: enable building with COMPILE_TESTStanimir Varbanov1-2/+3
We want all media drivers to build with COMPILE_TEST, as the Coverity instance we use on Kernel works only for x86. Also, our test workflow relies on it, in order to identify git bisect breakages. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
2017-06-20[media] af9013: refactor power controlAntti Palosaari1-57/+36
Move power-up and power-down functionality to init/sleep ops and get rid of old function. Fixes and simplifies power-up functionality slightly. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] af9013: refactor firmware download routineAntti Palosaari1-35/+30
Refactor firmware download routine. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] af9015: move 2nd demod power-up wait different locationAntti Palosaari1-3/+3
We need to wait 2nd demod power-up before download firmware. Move that wait to more correct location. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] af9013: remove unneeded register writesAntti Palosaari1-42/+0
Removed register writes are already chip defaults, are not required, are set later or belong to AF9015 USB interface. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] af9013: add configurable TS output pinAntti Palosaari2-13/+16
On serial TS mode output pin could be selected from D0 or D7. Add configuration option to for it. Rename TS mode config option prefix from AF9013_TS_ to AF9013_TS_MODE_. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] af9015: enable 2nd TS flow control when dual modeAntti Palosaari1-2/+13
It needs to be enabled in order to get stream from slave af9013 demod. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] af9015: fix and refactor i2c adapter algo logicAntti Palosaari1-74/+79
* fix write+read when write has more than one byte * remove lock, not needed on that case * remove useless i2c msg send loop, as we support only write, read and write+read as one go and nothing more Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] af9013: add dvbv5 cnrAntti Palosaari1-0/+9
Add support for DVBv5 CNR. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] af9013: fix error handlingAntti Palosaari1-35/+49
Use typical (return 0/goto err/return err) error handling everywhere. Add missing error handling where missing. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] af9013: convert to regmap apiAntti Palosaari3-306/+294
Use regmap for register access. Own low level i2c read and write routines for regmap is still needed because chip uses single command byte in addition to typical i2c register access. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] af9013: fix loggingAntti Palosaari1-102/+100
We can simplify logging as we now have a proper i2c client to pass for kernel dev_* logging functions. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] af9013: use kernel 64-bit divisionAntti Palosaari2-31/+4
Replace own binary division with 64-bit multiply and division. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] af9013: add i2c client bindingsAntti Palosaari2-164/+241
Add kernel i2c driver bindings. That allows dev_* logging, regmap and more. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] af9013: move config values directly under driver stateAntti Palosaari1-24/+38
It shorten, as typed chars, access to config values as there is one pointer less. Also, when config/platform data is passed to driver there could be some values that are not relevant to store state as such or not needed to store at all. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] af9015: use correct 7-bit i2c addressesAntti Palosaari2-13/+15
Driver was using wrong "8-bit" i2c addresses for demods and tuners. Internal demod i2c address was not set at all. These are needed to be fixed before proper i2c client binding is used. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] af9013: add check on af9013_wr_regs() return valueGustavo A. R. Silva1-0/+2
Check return value from call to af9013_wr_regs(), so in case of error print debug message and return. Addresses-Coverity-ID: 1227035 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] ddbridge: hardware IDs for new C2T2 cards and other devicesDaniel Scheller3-4/+88
Adds hardware IDs for all Sony CXD-based Cine-cards and MaxA8 devices, also adds some other yet missing IDs like the Octopus V3, Octopus OEM and Octopus Mini, as well as cards with unknown/deleted sub-ids. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] ddbridge: support for Sony CXD28xx C/C2/T/T2 tuner modulesDaniel Scheller3-14/+132
Properly detect and attach Ports and Flex modules with the Sony CXD28xxER series demods. This makes newer Cine cards and most DuoFlex C/C2/T/T2 (or any combination of these systems) work, PCI IDs need to be added though. Note: This utilises the CXD2841ER demod driver, which requires the changes from this patch series to properly work. Without those changes, it won't function properly (if at all). Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] ddbridge: add I2C functions, add XO2 module supportDaniel Scheller2-0/+158
Some Flex modules (mostly with anyof C/C2/T/T2 demods based on the Sony CXD28xxER series) are equipped with an interface named XO2 (which appears to be the Lattice MachXO2). Add functionality to detect such links and initialise them, so any tuner module with such an interface can be used. This also adds dummy detection for any possible connected module, telling the user it isn't supported at this very moment. Also adds i2c_io(), i2c_write() and i2c_write_reg(), all required for the XO2 handling functionality. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] ddbridge: board control setup, ts quirk flagsDaniel Scheller3-0/+27
This is a backport of the board control setup from the vendor provided dddvb driver package, which does additional device initialisation based on the board_control device info values. Also backports the TS quirk flags which is used to control setup and usage of the tuner modules soldered on the bridge cards (e.g. CineCTv7, CineS2 V7, MaxA8 and the likes). Functionality originates from ddbridge vendor driver. Permission for reuse and kernel inclusion was formally granted by Ralph Metzler <rjkm@metzlerbros.de>. Cc: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] dvb-frontends/cxd2841er: improved snr reportingDaniel Scheller1-3/+4
On DVB-T/T2 at least, SNR might be reported as >2500dB, which not only is just wrong but also ridiculous, so fix this by improving the conversion of the register value. The INTLOG10X100 function/macro and the way the values are converted were both taken from DD's cxd2843 driver. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Acked-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] dvb-frontends/cxd2841er: more configurable TSBITSDaniel Scheller2-0/+5
Bits 3 and 4 of the TSCONFIG register are important for certain hardware constellations, in that they need to be zeroed. Add a configuration flag to toggle this. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Acked-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] dvb-frontends/cxd2841er: configurable IFAGCNEGDaniel Scheller2-2/+4
Adds a flag to enable or disable the IFAGCNEG bit in cxd2841er_init_tc(). Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Acked-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] dvb-frontends/cxd2841er: make lock wait in set_fe_tc() optionalDaniel Scheller2-0/+5
Don't wait for FE_HAS_LOCK in set_frontend_tc() and thus don't hammer the lock status register with inquiries when CXD2841ER_NO_WAIT_LOCK is set in the configuration, which also unneccessarily blocks applications until a TS LOCK has been acquired. Rather, API and applications will check for a TS LOCK by utilising the tune fe_op, read_status and get_frontend ops, which is sufficient. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Acked-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] dvb-frontends/cxd2841er: optionally tune earlier in set_frontend()Daniel Scheller2-2/+13
When AUTO_IFHZ is set and the tuner is supposed to provide proper IF speed values, it should be possible to have the tuner setup take place before the demod is configured, else the demod might be configured with either wrong (old), or even no values at all, which obviously will cause issues. To set this behaviour in the most flexible way, this is done with a separate flag instead of making this depend on AUTO_IFHZ. It should be evaluated if tuning shouldn't take place earlier in all cases and hardware constellations. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Acked-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] dvb-frontends/cxd2841er: make ASCOT use optionalDaniel Scheller3-27/+46
The Sony CXD28xx demods may have other tuner types attached to them (e.g. NXP TDA18212), so don't mandatorily configure and enable the ASCOT functionality, but make this conditional by a config flag. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Acked-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] dvb-frontends/cxd2841er: TS_SERIAL config flagDaniel Scheller2-4/+19
Some constellations work/need a serial TS transport mode. This adds a flag that will toggle set up of such mode. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Acked-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] dvb-frontends/cxd2841er: support IF speed calc from tuner valuesDaniel Scheller2-18/+47
Add a AUTO_IFHZ flag and a function that will read IF speed values from any attached tuner if the tuner supports this and if AUTO_IFHZ is enabled, and else the passed default value (which probably matches Sony ASCOT tuners) will be passed back. The returned value is then used to calculate the iffeq which the demod will be programmed with. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Acked-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] dvb-frontends/cxd2841er: make call to i2c_gate_ctrl optionalDaniel Scheller3-13/+24
Some cards/bridges wrap i2c_gate_ctrl handling with a mutex_lock(). This is e.g. done in ddbridge to protect against concurrent tuner access with regards to the dual tuner HW, where concurrent tuner reconfiguration can result in tuning fails or bad reception quality. When the tuner driver additionally tries to open the I2C gate (which e.g. the tda18212 driver does) when the demod already did this, this will lead to a deadlock. This makes the calls to i2c_gatectrl from the demod driver optional when the flag is set, leaving this to the tuner driver. For readability reasons and to not have the check duplicated multiple times, the setup is factored into cxd2841er_tuner_set(). This commit also updates the netup card driver (which seems to be the only consumer of the cxd2841er as of now). Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Acked-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>