| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 30040818b338b8ebc956ce0ebd198f8d593586a6 ]
In case runtime PM is enabled, do runtime PM clean up to remove
cpu latency qos request, otherwise driver removal may have below
kernel dump:
[ 19.463299] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000048
[ 19.472161] Mem abort info:
[ 19.474985] ESR = 0x0000000096000004
[ 19.478754] EC = 0x25: DABT (current EL), IL = 32 bits
[ 19.484081] SET = 0, FnV = 0
[ 19.487149] EA = 0, S1PTW = 0
[ 19.490361] FSC = 0x04: level 0 translation fault
[ 19.495256] Data abort info:
[ 19.498149] ISV = 0, ISS = 0x00000004
[ 19.501997] CM = 0, WnR = 0
[ 19.504977] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000049f81000
[ 19.511432] [0000000000000048] pgd=0000000000000000,
p4d=0000000000000000
[ 19.518245] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 19.524520] Modules linked in: gpio_ir_recv(+) rc_core [last
unloaded: rc_core]
[ 19.531845] CPU: 0 PID: 445 Comm: insmod Not tainted
6.2.0-rc1-00028-g2c397a46d47c #72
[ 19.531854] Hardware name: FSL i.MX8MM EVK board (DT)
[ 19.531859] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[ 19.551777] pc : cpu_latency_qos_remove_request+0x20/0x110
[ 19.557277] lr : gpio_ir_recv_runtime_suspend+0x18/0x30
[gpio_ir_recv]
[ 19.557294] sp : ffff800008ce3740
[ 19.557297] x29: ffff800008ce3740 x28: 0000000000000000 x27:
ffff800008ce3d50
[ 19.574270] x26: ffffc7e3e9cea100 x25: 00000000000f4240 x24:
ffffc7e3f9ef0e30
[ 19.574284] x23: 0000000000000000 x22: ffff0061803820f4 x21:
0000000000000008
[ 19.574296] x20: ffffc7e3fa75df30 x19: 0000000000000020 x18:
ffffffffffffffff
[ 19.588570] x17: 0000000000000000 x16: ffffc7e3f9efab70 x15:
ffffffffffffffff
[ 19.595712] x14: ffff800008ce37b8 x13: ffff800008ce37aa x12:
0000000000000001
[ 19.602853] x11: 0000000000000001 x10: ffffcbe3ec0dff87 x9 :
0000000000000008
[ 19.609991] x8 : 0101010101010101 x7 : 0000000000000000 x6 :
000000000f0bfe9f
[ 19.624261] x5 : 00ffffffffffffff x4 : 0025ab8e00000000 x3 :
ffff006180382010
[ 19.631405] x2 : ffffc7e3e9ce8030 x1 : ffffc7e3fc3eb810 x0 :
0000000000000020
[ 19.638548] Call trace:
[ 19.640995] cpu_latency_qos_remove_request+0x20/0x110
[ 19.646142] gpio_ir_recv_runtime_suspend+0x18/0x30 [gpio_ir_recv]
[ 19.652339] pm_generic_runtime_suspend+0x2c/0x44
[ 19.657055] __rpm_callback+0x48/0x1dc
[ 19.660807] rpm_callback+0x6c/0x80
[ 19.664301] rpm_suspend+0x10c/0x640
[ 19.667880] rpm_idle+0x250/0x2d0
[ 19.671198] update_autosuspend+0x38/0xe0
[ 19.675213] pm_runtime_set_autosuspend_delay+0x40/0x60
[ 19.680442] gpio_ir_recv_probe+0x1b4/0x21c [gpio_ir_recv]
[ 19.685941] platform_probe+0x68/0xc0
[ 19.689610] really_probe+0xc0/0x3dc
[ 19.693189] __driver_probe_device+0x7c/0x190
[ 19.697550] driver_probe_device+0x3c/0x110
[ 19.701739] __driver_attach+0xf4/0x200
[ 19.705578] bus_for_each_dev+0x70/0xd0
[ 19.709417] driver_attach+0x24/0x30
[ 19.712998] bus_add_driver+0x17c/0x240
[ 19.716834] driver_register+0x78/0x130
[ 19.720676] __platform_driver_register+0x28/0x34
[ 19.725386] gpio_ir_recv_driver_init+0x20/0x1000 [gpio_ir_recv]
[ 19.731404] do_one_initcall+0x44/0x2ac
[ 19.735243] do_init_module+0x48/0x1d0
[ 19.739003] load_module+0x19fc/0x2034
[ 19.742759] __do_sys_finit_module+0xac/0x12c
[ 19.747124] __arm64_sys_finit_module+0x20/0x30
[ 19.751664] invoke_syscall+0x48/0x114
[ 19.755420] el0_svc_common.constprop.0+0xcc/0xec
[ 19.760132] do_el0_svc+0x38/0xb0
[ 19.763456] el0_svc+0x2c/0x84
[ 19.766516] el0t_64_sync_handler+0xf4/0x120
[ 19.770789] el0t_64_sync+0x190/0x194
[ 19.774460] Code: 910003fd a90153f3 aa0003f3 91204021 (f9401400)
[ 19.780556] ---[ end trace 0000000000000000 ]---
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit afa4805799c1d332980ad23339fdb07b5e0cf7e0 ]
Gain control is badly documented in publicly available (including
leaked) documentation.
There is an AGC pre-gain in register 0x3a13, expressed as a 6-bit value
(plus an enable bit in bit 6). The driver hardcodes it to 0x43, which
one application note states is equal to x1.047. The documentation also
states that 0x40 is equel to x1.000. The pre-gain thus seems to be
expressed as in 1/64 increments, and thus ranges from x1.00 to x1.984.
What the pre-gain does is however unspecified.
There is then an AGC gain limit, in registers 0x3a18 and 0x3a19,
expressed as a 10-bit "real gain format" value. One application note
sets it to 0x00f8 and states it is equal to x15.5, so it appears to be
expressed in 1/16 increments, up to x63.9375.
The manual gain is stored in registers 0x350a and 0x350b, also as a
10-bit "real gain format" value. It is documented in the application
note as a Q6.4 values, up to x63.9375.
One version of the datasheet indicates that the sensor supports a
digital gain:
The OV5640 supports 1/2/4 digital gain. Normally, the gain is
controlled automatically by the automatic gain control (AGC) block.
It isn't clear how that would be controlled manually.
There appears to be no indication regarding whether the gain controlled
through registers 0x350a and 0x350b is an analogue gain only or also
includes digital gain. The words "real gain" don't necessarily mean
"combined analogue and digital gains". Some OmniVision sensors (such as
the OV8858) are documented as supoprting different formats for the gain
values, selectable through a register bit, and they are called "real
gain format" and "sensor gain format". For that sensor, we have (one of)
the gain registers documented as
0x3503[2]=0, gain[7:0] is real gain format, where low 4 bits are
fraction bits, for example, 0x10 is 1x gain, 0x28 is 2.5x gain
If 0x3503[2]=1, gain[7:0] is sensor gain format, gain[7:4] is coarse
gain, 00000: 1x, 00001: 2x, 00011: 4x, 00111: 8x, gain[7] is 1,
gain[3:0] is fine gain. For example, 0x10 is 1x gain, 0x30 is 2x gain,
0x70 is 4x gain
(The second part of the text makes little sense)
"Real gain" may thus refer to the combination of the coarse and fine
analogue gains as a single value.
The OV5640 0x350a and 0x350b registers thus appear to control analogue
gain. The driver incorrectly uses V4L2_CID_GAIN as V4L2 has a specific
control for analogue gain, V4L2_CID_ANALOGUE_GAIN. Use it.
If registers 0x350a and 0x350b are later found to control digital gain
as well, the driver could then restrict the range of the analogue gain
control value to lower than x64 and add a separate digital gain control.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 619d9b710cf06f7a00a17120ca92333684ac45a8 upstream.
usb_kill_urb warranties that all the handlers are finished when it
returns, but does not protect against threads that might be handling
asynchronously the urb.
For UVC, the function uvc_ctrl_status_event_async() takes care of
control changes asynchronously.
If the code is executed in the following order:
CPU 0 CPU 1
===== =====
uvc_status_complete()
uvc_status_stop()
uvc_ctrl_status_event_work()
uvc_status_start() -> FAIL
Then uvc_status_start will keep failing and this error will be shown:
<4>[ 5.540139] URB 0000000000000000 submitted while active
drivers/usb/core/urb.c:378 usb_submit_urb+0x4c3/0x528
Let's improve the current situation, by not re-submiting the urb if
we are stopping the status event. Also process the queued work
(if any) during stop.
CPU 0 CPU 1
===== =====
uvc_status_complete()
uvc_status_stop()
uvc_status_start()
uvc_ctrl_status_event_work() -> FAIL
Hopefully, with the usb layer protection this should be enough to cover
all the cases.
Cc: stable@vger.kernel.org
Fixes: e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives")
Reviewed-by: Yunke Cao <yunkec@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d9c8763e61295be0a21dc04ad9c379d5d17c3d86 upstream.
Split the functionality of void uvc_ctrl_status_event_work in two, so it
can be called by functions outside interrupt context and not part of an
URB.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b839212988575c701aab4d3d9ca15e44c87e383c ]
The memcpy() in uvc_video_decode_meta() intentionally copies across the
length and flags members and into the trailing buf flexible array.
Split the copy so that the compiler can better reason about (the lack
of) buffer overflows here. Avoid the run-time false positive warning:
memcpy: detected field-spanning write (size 12) of single field "&meta->length" at drivers/media/usb/uvc/uvc_video.c:1355 (size 1)
Additionally fix a typo in the documentation for struct uvc_meta_buf.
Reported-by: ionut_n2001@yahoo.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216810
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 136effa754b57632f99574fc4a3433e0cfc031d9 ]
Logitech B910 and C910 firmware are unable to recover from a USB
autosuspend. When it resumes, the device is in a state where it only
produces invalid frames. Eg:
$ echo 0xFFFF > /sys/module/uvcvideo/parameters/trace # enable verbose log
$ yavta -c1 -n1 --file='frame#.jpg' --format MJPEG --size=1920x1080 /dev/video1
[350438.435219] uvcvideo: uvc_v4l2_open
[350438.529794] uvcvideo: Resuming interface 2
[350438.529801] uvcvideo: Resuming interface 3
[350438.529991] uvcvideo: Trying format 0x47504a4d (MJPG): 1920x1080.
[350438.529996] uvcvideo: Using default frame interval 33333.3 us (30.0 fps).
[350438.551496] uvcvideo: uvc_v4l2_mmap
[350438.555890] uvcvideo: Device requested 3060 B/frame bandwidth.
[350438.555896] uvcvideo: Selecting alternate setting 11 (3060 B/frame bandwidth).
[350438.556362] uvcvideo: Allocated 5 URB buffers of 32x3060 bytes each.
[350439.316468] uvcvideo: Marking buffer as bad (error bit set).
[350439.316475] uvcvideo: Frame complete (EOF found).
[350439.316477] uvcvideo: EOF in empty payload.
[350439.316484] uvcvideo: frame 1 stats: 149/261/417 packets, 1/149/417 pts (early initial), 416/417 scr, last pts/stc/sof 2976325734/2978107243/249
[350439.384510] uvcvideo: Marking buffer as bad (error bit set).
[350439.384516] uvcvideo: Frame complete (EOF found).
[350439.384518] uvcvideo: EOF in empty payload.
[350439.384525] uvcvideo: frame 2 stats: 265/379/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2979524454/2981305193/316
[350439.448472] uvcvideo: Marking buffer as bad (error bit set).
[350439.448478] uvcvideo: Frame complete (EOF found).
[350439.448480] uvcvideo: EOF in empty payload.
[350439.448487] uvcvideo: frame 3 stats: 265/377/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2982723174/2984503144/382
...(loop)...
The devices can leave this invalid state if the alternate setting of
the streaming interface is toggled.
This patch adds a quirk for this device so it can be autosuspended
properly.
lsusb -v:
Bus 001 Device 049: ID 046d:0821 Logitech, Inc. HD Webcam C910
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x046d Logitech, Inc.
idProduct 0x0821 HD Webcam C910
bcdDevice 0.10
iManufacturer 0
iProduct 0
iSerial 1 390022B0
bNumConfigurations 1
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4867bb590ae445bcfaa711a86b603c97e94574b3 ]
On a Webcam from Quanta, we see the following error.
usb 3-5: New USB device found, idVendor=0408, idProduct=30d2, bcdDevice= 0.03
usb 3-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 3-5: Product: USB2.0 HD UVC WebCam
usb 3-5: Manufacturer: Quanta
usb 3-5: SerialNumber: 0x0001
...
uvcvideo: Found UVC 1.10 device USB2.0 HD UVC WebCam (0408:30d2)
uvcvideo: Failed to initialize entity for entity 5
uvcvideo: Failed to register entities (-22).
The Webcam reports an entity of type UVC_VC_EXTENSION_UNIT. It reports a
string index of '7' associated with that entity. The attempt to read that
string from the camera fails with error -32 (-EPIPE). usb_string() returns
that error, but it is ignored. As result, the entity name is empty. This
later causes v4l2_device_register_subdev() to return -EINVAL, and no
entities are registered as result.
While this appears to be a firmware problem with the camera, the kernel
should still handle the situation gracefully. To do that, check the return
value from usb_string(). If it reports an error, assign the entity's
default name.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 41ddb251c68ac75c101d3a50a68c4629c9055e4c ]
If the source entity does not contain any pads, do not create a link.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 909d3096ac99fa2289f9b8945a3eab2269947a0a upstream.
Get the PM runtime usage_count and forbid PM runtime at driver unbind. The
opposite is being done in probe() already.
Fixes: commit c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver")
Cc: stable@vger.kernel.org # for >= 4.16
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bc7635c6435c77a0c168e2cc6535740adfaff4e4 ]
The radio device doesn't use vb2, thus calling vb2_video_unregister_device()
which results in the following warning being printed on module unload.
WARNING: CPU: 1 PID: 215963 at drivers/media/common/videobuf2/videobuf2-v4l2.c:1236 vb2_video_unregister_device+0xc6/0xe0 [videobuf2_v4l2]
Fixes: 11788d9b7e91 ("media: media/pci: use vb2_video_unregister_device()")
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ebad8e731c1c06adf04621d6fd327b860c0861b5 ]
There are UAF bugs caused by do_submit_urb(). One of the KASan reports
is shown below:
[ 36.403605] BUG: KASAN: use-after-free in worker_thread+0x4a2/0x890
[ 36.406105] Read of size 8 at addr ffff8880059600e8 by task kworker/0:2/49
[ 36.408316]
[ 36.408867] CPU: 0 PID: 49 Comm: kworker/0:2 Not tainted 6.2.0-rc3-15798-g5a41237ad1d4-dir8
[ 36.411696] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584
[ 36.416157] Workqueue: 0x0 (events)
[ 36.417654] Call Trace:
[ 36.418546] <TASK>
[ 36.419320] dump_stack_lvl+0x96/0xd0
[ 36.420522] print_address_description+0x75/0x350
[ 36.421992] print_report+0x11b/0x250
[ 36.423174] ? _raw_spin_lock_irqsave+0x87/0xd0
[ 36.424806] ? __virt_addr_valid+0xcf/0x170
[ 36.426069] ? worker_thread+0x4a2/0x890
[ 36.427355] kasan_report+0x131/0x160
[ 36.428556] ? worker_thread+0x4a2/0x890
[ 36.430053] worker_thread+0x4a2/0x890
[ 36.431297] ? worker_clr_flags+0x90/0x90
[ 36.432479] kthread+0x166/0x190
[ 36.433493] ? kthread_blkcg+0x50/0x50
[ 36.434669] ret_from_fork+0x22/0x30
[ 36.435923] </TASK>
[ 36.436684]
[ 36.437215] Allocated by task 24:
[ 36.438289] kasan_set_track+0x50/0x80
[ 36.439436] __kasan_kmalloc+0x89/0xa0
[ 36.440566] smsusb_probe+0x374/0xc90
[ 36.441920] usb_probe_interface+0x2d1/0x4c0
[ 36.443253] really_probe+0x1d5/0x580
[ 36.444539] __driver_probe_device+0xe3/0x130
[ 36.446085] driver_probe_device+0x49/0x220
[ 36.447423] __device_attach_driver+0x19e/0x1b0
[ 36.448931] bus_for_each_drv+0xcb/0x110
[ 36.450217] __device_attach+0x132/0x1f0
[ 36.451470] bus_probe_device+0x59/0xf0
[ 36.452563] device_add+0x4ec/0x7b0
[ 36.453830] usb_set_configuration+0xc63/0xe10
[ 36.455230] usb_generic_driver_probe+0x3b/0x80
[ 36.456166] printk: console [ttyGS0] disabled
[ 36.456569] usb_probe_device+0x90/0x110
[ 36.459523] really_probe+0x1d5/0x580
[ 36.461027] __driver_probe_device+0xe3/0x130
[ 36.462465] driver_probe_device+0x49/0x220
[ 36.463847] __device_attach_driver+0x19e/0x1b0
[ 36.465229] bus_for_each_drv+0xcb/0x110
[ 36.466466] __device_attach+0x132/0x1f0
[ 36.467799] bus_probe_device+0x59/0xf0
[ 36.469010] device_add+0x4ec/0x7b0
[ 36.470125] usb_new_device+0x863/0xa00
[ 36.471374] hub_event+0x18c7/0x2220
[ 36.472746] process_one_work+0x34c/0x5b0
[ 36.474041] worker_thread+0x4b7/0x890
[ 36.475216] kthread+0x166/0x190
[ 36.476267] ret_from_fork+0x22/0x30
[ 36.477447]
[ 36.478160] Freed by task 24:
[ 36.479239] kasan_set_track+0x50/0x80
[ 36.480512] kasan_save_free_info+0x2b/0x40
[ 36.481808] ____kasan_slab_free+0x122/0x1a0
[ 36.483173] __kmem_cache_free+0xc4/0x200
[ 36.484563] smsusb_term_device+0xcd/0xf0
[ 36.485896] smsusb_probe+0xc85/0xc90
[ 36.486976] usb_probe_interface+0x2d1/0x4c0
[ 36.488303] really_probe+0x1d5/0x580
[ 36.489498] __driver_probe_device+0xe3/0x130
[ 36.491140] driver_probe_device+0x49/0x220
[ 36.492475] __device_attach_driver+0x19e/0x1b0
[ 36.493988] bus_for_each_drv+0xcb/0x110
[ 36.495171] __device_attach+0x132/0x1f0
[ 36.496617] bus_probe_device+0x59/0xf0
[ 36.497875] device_add+0x4ec/0x7b0
[ 36.498972] usb_set_configuration+0xc63/0xe10
[ 36.500264] usb_generic_driver_probe+0x3b/0x80
[ 36.501740] usb_probe_device+0x90/0x110
[ 36.503084] really_probe+0x1d5/0x580
[ 36.504241] __driver_probe_device+0xe3/0x130
[ 36.505548] driver_probe_device+0x49/0x220
[ 36.506766] __device_attach_driver+0x19e/0x1b0
[ 36.508368] bus_for_each_drv+0xcb/0x110
[ 36.509646] __device_attach+0x132/0x1f0
[ 36.510911] bus_probe_device+0x59/0xf0
[ 36.512103] device_add+0x4ec/0x7b0
[ 36.513215] usb_new_device+0x863/0xa00
[ 36.514736] hub_event+0x18c7/0x2220
[ 36.516130] process_one_work+0x34c/0x5b0
[ 36.517396] worker_thread+0x4b7/0x890
[ 36.518591] kthread+0x166/0x190
[ 36.519599] ret_from_fork+0x22/0x30
[ 36.520851]
[ 36.521405] Last potentially related work creation:
[ 36.523143] kasan_save_stack+0x3f/0x60
[ 36.524275] kasan_record_aux_stack_noalloc+0x9d/0xb0
[ 36.525831] insert_work+0x25/0x130
[ 36.527039] __queue_work+0x4d4/0x620
[ 36.528236] queue_work_on+0x72/0xb0
[ 36.529344] __usb_hcd_giveback_urb+0x13f/0x1b0
[ 36.530819] dummy_timer+0x350/0x1a40
[ 36.532149] call_timer_fn+0x2c/0x190
[ 36.533567] expire_timers+0x69/0x1f0
[ 36.534736] __run_timers+0x289/0x2d0
[ 36.535841] run_timer_softirq+0x2d/0x60
[ 36.537110] __do_softirq+0x116/0x380
[ 36.538377]
[ 36.538950] Second to last potentially related work creation:
[ 36.540855] kasan_save_stack+0x3f/0x60
[ 36.542084] kasan_record_aux_stack_noalloc+0x9d/0xb0
[ 36.543592] insert_work+0x25/0x130
[ 36.544891] __queue_work+0x4d4/0x620
[ 36.546168] queue_work_on+0x72/0xb0
[ 36.547328] __usb_hcd_giveback_urb+0x13f/0x1b0
[ 36.548805] dummy_timer+0x350/0x1a40
[ 36.550116] call_timer_fn+0x2c/0x190
[ 36.551570] expire_timers+0x69/0x1f0
[ 36.552762] __run_timers+0x289/0x2d0
[ 36.553916] run_timer_softirq+0x2d/0x60
[ 36.555118] __do_softirq+0x116/0x380
[ 36.556239]
[ 36.556807] The buggy address belongs to the object at ffff888005960000
[ 36.556807] which belongs to the cache kmalloc-4k of size 4096
[ 36.560652] The buggy address is located 232 bytes inside of
[ 36.560652] 4096-byte region [ffff888005960000, ffff888005961000)
[ 36.564791]
[ 36.565355] The buggy address belongs to the physical page:
[ 36.567212] page:000000004f0a0731 refcount:1 mapcount:0 mapping:0000000000000000 index:0x00
[ 36.570534] head:000000004f0a0731 order:3 compound_mapcount:0 subpages_mapcount:0 compound0
[ 36.573717] flags: 0x100000000010200(slab|head|node=0|zone=1)
[ 36.575481] raw: 0100000000010200 ffff888001042140 dead000000000122 0000000000000000
[ 36.577842] raw: 0000000000000000 0000000000040004 00000001ffffffff 0000000000000000
[ 36.580175] page dumped because: kasan: bad access detected
[ 36.581994]
[ 36.582548] Memory state around the buggy address:
[ 36.583983] ffff88800595ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 36.586240] ffff888005960000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 36.588884] >ffff888005960080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 36.591071] ^
[ 36.593295] ffff888005960100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 36.595705] ffff888005960180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 36.598026] ==================================================================
[ 36.600224] Disabling lock debugging due to kernel taint
[ 36.602681] general protection fault, probably for non-canonical address 0x43600a000000060I
[ 36.607129] CPU: 0 PID: 49 Comm: kworker/0:2 Tainted: G B 6.2.0-rc3-15798-8
[ 36.611115] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584
[ 36.615026] Workqueue: events do_submit_urb
[ 36.616290] RIP: 0010:_raw_spin_lock_irqsave+0x8a/0xd0
[ 36.618107] Code: 24 00 00 00 00 48 89 df be 04 00 00 00 e8 9e b5 c6 fe 48 89 ef be 04 00 5
[ 36.623522] RSP: 0018:ffff888004b6fcf0 EFLAGS: 00010046
[ 36.625072] RAX: 0000000000000000 RBX: 043600a000000060 RCX: ffffffff9fc0e0d7
[ 36.627206] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff888004b6fcf0
[ 36.629813] RBP: ffff888004b6fcf0 R08: dffffc0000000000 R09: ffffed100096df9f
[ 36.631974] R10: dfffe9100096dfa0 R11: 1ffff1100096df9e R12: ffff888005960020
[ 36.634285] R13: ffff8880059600f0 R14: 0000000000000246 R15: 0000000000000001
[ 36.636438] FS: 0000000000000000(0000) GS:ffff88806d600000(0000) knlGS:0000000000000000
[ 36.639092] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 36.640951] CR2: 00007f07476819a3 CR3: 0000000004a34000 CR4: 00000000000006f0
[ 36.643411] Call Trace:
[ 36.644215] <TASK>
[ 36.644902] smscore_getbuffer+0x3e/0x1e0
[ 36.646147] do_submit_urb+0x4f/0x190
[ 36.647449] process_one_work+0x34c/0x5b0
[ 36.648777] worker_thread+0x4b7/0x890
[ 36.649984] ? worker_clr_flags+0x90/0x90
[ 36.651166] kthread+0x166/0x190
[ 36.652151] ? kthread_blkcg+0x50/0x50
[ 36.653547] ret_from_fork+0x22/0x30
[ 36.655051] </TASK>
[ 36.655733] Modules linked in:
[ 36.656787] ---[ end trace 0000000000000000 ]---
[ 36.658328] RIP: 0010:_raw_spin_lock_irqsave+0x8a/0xd0
[ 36.660045] Code: 24 00 00 00 00 48 89 df be 04 00 00 00 e8 9e b5 c6 fe 48 89 ef be 04 00 5
[ 36.665730] RSP: 0018:ffff888004b6fcf0 EFLAGS: 00010046
[ 36.667448] RAX: 0000000000000000 RBX: 043600a000000060 RCX: ffffffff9fc0e0d7
[ 36.669675] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff888004b6fcf0
[ 36.672645] RBP: ffff888004b6fcf0 R08: dffffc0000000000 R09: ffffed100096df9f
[ 36.674921] R10: dfffe9100096dfa0 R11: 1ffff1100096df9e R12: ffff888005960020
[ 36.677034] R13: ffff8880059600f0 R14: 0000000000000246 R15: 0000000000000001
[ 36.679184] FS: 0000000000000000(0000) GS:ffff88806d600000(0000) knlGS:0000000000000000
[ 36.681655] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 36.683383] CR2: 00007f07476819a3 CR3: 0000000004a34000 CR4: 00000000000006f0
[ 36.685733] Kernel panic - not syncing: Fatal exception
[ 36.688585] Kernel Offset: 0x1d400000 from 0xffffffff81000000 (relocation range: 0xfffffff)
[ 36.692199] ---[ end Kernel panic - not syncing: Fatal exception ]---
When the siano device is plugged in, it may call the following functions
to initialize the device.
smsusb_probe()-->smsusb_init_device()-->smscore_start_device().
When smscore_start_device() gets failed, the function smsusb_term_device()
will be called and smsusb_device_t will be deallocated. Although we use
usb_kill_urb() in smsusb_stop_streaming() to cancel transfer requests
and wait for them to finish, the worker threads that are scheduled by
smsusb_onresponse() may be still running. As a result, the UAF bugs
could happen.
We add cancel_work_sync() in smsusb_stop_streaming() in order that the
worker threads could finish before the smsusb_device_t is deallocated.
Fixes: dd47fbd40e6e ("[media] smsusb: don't sleep while atomic")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6a4c664539e6de9b32b65ddcf767ec1bcc1d7f8a ]
If the media bus is unsupported, then return -EINVAL. Instead it
returned 'ret' which happened to be 0.
This fixes a smatch warning:
ov7670.c:1843 ov7670_parse_dt() warn: missing error code? 'ret'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 01b8444828fc ("media: v4l2: i2c: ov7670: Implement OF mbus configuration")
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 29b0589a865b6f66d141d79b2dd1373e4e50fe17 ]
When the ene device is detaching, function ene_remove() will
be called. But there is no function to cancel tx_sim_timer
in ene_remove(), the timer handler ene_tx_irqsim() could race
with ene_remove(). As a result, the UAF bugs could happen,
the process is shown below.
(cleanup routine) | (timer routine)
| mod_timer(&dev->tx_sim_timer, ..)
ene_remove() | (wait a time)
| ene_tx_irqsim()
| dev->hw_lock //USE
| ene_tx_sample(dev) //USE
Fix by adding del_timer_sync(&dev->tx_sim_timer) in ene_remove(),
The tx_sim_timer could stop before ene device is deallocated.
What's more, The rc_unregister_device() and del_timer_sync()
should be called first in ene_remove() and the deallocated
functions such as free_irq(), release_region() and so on
should be called behind them. Because the rc_unregister_device()
is well synchronized. Otherwise, race conditions may happen. The
situations that may lead to race conditions are shown below.
Firstly, the rx receiver is disabled with ene_rx_disable()
before rc_unregister_device() in ene_remove(), which means it
can be enabled again if a process opens /dev/lirc0 between
ene_rx_disable() and rc_unregister_device().
Secondly, the irqaction descriptor is freed by free_irq()
before the rc device is unregistered, which means irqaction
descriptor may be accessed again after it is deallocated.
Thirdly, the timer can call ene_tx_sample() that can write
to the io ports, which means the io ports could be accessed
again after they are deallocated by release_region().
Therefore, the rc_unregister_device() and del_timer_sync()
should be called first in ene_remove().
Suggested by: Sean Young <sean@mess.org>
Fixes: 9ea53b74df9c ("V4L/DVB: STAGING: remove lirc_ene0100 driver")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef86447e775fb1f2ced00d4c7fff2c0a1c63f165 ]
2x2 binning works fine for RAW10 capture, but for RAW8 1232p mode it
leads to corrupted frames [1][2].
Using the special 2x2 analog binning mode fixes the issue, but causes
artefacts for RAW10 1232p capture. So here we choose the binning mode
depending upon the frame format selected.
As both binning modes work fine for 480p RAW8 and RAW10 capture, it can
share the same code path as 1232p for selecting binning mode.
[1] https://forums.raspberrypi.com/viewtopic.php?t=332103
[2] https://github.com/raspberrypi/libcamera-apps/issues/281
Fixes: 22da1d56e982 ("media: i2c: imx219: Add support for RAW8 bit bayer format")
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8508455961d5a9e8907bcfd8dcd58f19d9b6ce47 ]
There are four modes, and each mode has a table of registers.
Some of the registers are common to all modes, so create new
tables for these common registers to reduce duplicate code.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: ef86447e775f ("media: i2c: imx219: Fix binning for RAW8 capture")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fbef89886da6d7735d20fdde16a1ee6ed6c6ab56 ]
These writes to 0x162, 0x163 already appear earlier in the struct for
the 1920x1080 mode and do not need to be repeated.
Signed-off-by: Sameer Puri <purisame@spuri.io>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stable-dep-of: ef86447e775f ("media: i2c: imx219: Fix binning for RAW8 capture")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7485edb2b6ca5960205c0a49bedfd09bba30e521 ]
A memory leak was reported when testing ov772x with bpf mock device:
AssertionError: unreferenced object 0xffff888109afa7a8 (size 8):
comm "python3", pid 279, jiffies 4294805921 (age 20.681s)
hex dump (first 8 bytes):
80 22 88 15 81 88 ff ff ."......
backtrace:
[<000000009990b438>] __kmalloc_node+0x44/0x1b0
[<000000009e32f7d7>] kvmalloc_node+0x34/0x180
[<00000000faf48134>] v4l2_ctrl_handler_init_class+0x11d/0x180 [videodev]
[<00000000da376937>] ov772x_probe+0x1c3/0x68c [ov772x]
[<000000003f0d225e>] i2c_device_probe+0x28d/0x680
[<00000000e0b6db89>] really_probe+0x17c/0x3f0
[<000000001b19fcee>] __driver_probe_device+0xe3/0x170
[<0000000048370519>] driver_probe_device+0x49/0x120
[<000000005ead07a0>] __device_attach_driver+0xf7/0x150
[<0000000043f452b8>] bus_for_each_drv+0x114/0x180
[<00000000358e5596>] __device_attach+0x1e5/0x2d0
[<0000000043f83c5d>] bus_probe_device+0x126/0x140
[<00000000ee0f3046>] device_add+0x810/0x1130
[<00000000e0278184>] i2c_new_client_device+0x359/0x4f0
[<0000000070baf34f>] of_i2c_register_device+0xf1/0x110
[<00000000a9f2159d>] of_i2c_notify+0x100/0x160
unreferenced object 0xffff888119825c00 (size 256):
comm "python3", pid 279, jiffies 4294805921 (age 20.681s)
hex dump (first 32 bytes):
00 b4 a5 17 81 88 ff ff 00 5e 82 19 81 88 ff ff .........^......
10 5c 82 19 81 88 ff ff 10 5c 82 19 81 88 ff ff .\.......\......
backtrace:
[<000000009990b438>] __kmalloc_node+0x44/0x1b0
[<000000009e32f7d7>] kvmalloc_node+0x34/0x180
[<0000000073d88e0b>] v4l2_ctrl_new.cold+0x19b/0x86f [videodev]
[<00000000b1f576fb>] v4l2_ctrl_new_std+0x16f/0x210 [videodev]
[<00000000caf7ac99>] ov772x_probe+0x1fa/0x68c [ov772x]
[<000000003f0d225e>] i2c_device_probe+0x28d/0x680
[<00000000e0b6db89>] really_probe+0x17c/0x3f0
[<000000001b19fcee>] __driver_probe_device+0xe3/0x170
[<0000000048370519>] driver_probe_device+0x49/0x120
[<000000005ead07a0>] __device_attach_driver+0xf7/0x150
[<0000000043f452b8>] bus_for_each_drv+0x114/0x180
[<00000000358e5596>] __device_attach+0x1e5/0x2d0
[<0000000043f83c5d>] bus_probe_device+0x126/0x140
[<00000000ee0f3046>] device_add+0x810/0x1130
[<00000000e0278184>] i2c_new_client_device+0x359/0x4f0
[<0000000070baf34f>] of_i2c_register_device+0xf1/0x110
The reason is that if priv->hdl.error is set, ov772x_probe() jumps to the
error_mutex_destroy without doing v4l2_ctrl_handler_free(), and all
resources allocated in v4l2_ctrl_handler_init() and v4l2_ctrl_new_std()
are leaked.
Fixes: 1112babde214 ("media: i2c: Copy ov772x soc_camera sensor driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dd74ed6c213003533e3abf4c204374ef01d86978 ]
There is a kmemleak when testing the media/i2c/ov5675.c with bpf mock
device:
AssertionError: unreferenced object 0xffff888107362160 (size 16):
comm "python3", pid 277, jiffies 4294832798 (age 20.722s)
hex dump (first 16 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000abe7d67c>] __kmalloc_node+0x44/0x1b0
[<000000008a725aac>] kvmalloc_node+0x34/0x180
[<000000009a53cd11>] v4l2_ctrl_handler_init_class+0x11d/0x180
[videodev]
[<0000000055b46db0>] ov5675_probe+0x38b/0x897 [ov5675]
[<00000000153d886c>] i2c_device_probe+0x28d/0x680
[<000000004afb7e8f>] really_probe+0x17c/0x3f0
[<00000000ff2f18e4>] __driver_probe_device+0xe3/0x170
[<000000000a001029>] driver_probe_device+0x49/0x120
[<00000000e39743c7>] __device_attach_driver+0xf7/0x150
[<00000000d32fd070>] bus_for_each_drv+0x114/0x180
[<000000009083ac41>] __device_attach+0x1e5/0x2d0
[<0000000015b4a830>] bus_probe_device+0x126/0x140
[<000000007813deaf>] device_add+0x810/0x1130
[<000000007becb867>] i2c_new_client_device+0x386/0x540
[<000000007f9cf4b4>] of_i2c_register_device+0xf1/0x110
[<00000000ebfdd032>] of_i2c_notify+0xfc/0x1f0
ov5675_init_controls() won't clean all the allocated resources in fail
path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to
prevent memleak.
Fixes: bf27502b1f3b ("media: ov5675: Add support for OV5675 sensor")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d899592ed7829d0d5140853bac4d58742a6b8af ]
There is a kmemleak when testing the media/i2c/ov2740.c with bpf mock
device:
unreferenced object 0xffff8881090e19e0 (size 16):
comm "51-i2c-ov2740", pid 278, jiffies 4294781584 (age 23.613s)
hex dump (first 16 bytes):
00 f3 7c 0b 81 88 ff ff 80 75 6a 09 81 88 ff ff ..|......uj.....
backtrace:
[<000000004e9fad8f>] __kmalloc_node+0x44/0x1b0
[<0000000039c802f4>] kvmalloc_node+0x34/0x180
[<000000009b8b5c63>] v4l2_ctrl_handler_init_class+0x11d/0x180
[videodev]
[<0000000038644056>] ov2740_probe+0x37d/0x84f [ov2740]
[<0000000092489f59>] i2c_device_probe+0x28d/0x680
[<000000001038babe>] really_probe+0x17c/0x3f0
[<0000000098c7af1c>] __driver_probe_device+0xe3/0x170
[<00000000e1b3dc24>] device_driver_attach+0x34/0x80
[<000000005a04a34d>] bind_store+0x10b/0x1a0
[<00000000ce25d4f2>] drv_attr_store+0x49/0x70
[<000000007d9f4e9a>] sysfs_kf_write+0x8c/0xb0
[<00000000be6cff0f>] kernfs_fop_write_iter+0x216/0x2e0
[<0000000031ddb40a>] vfs_write+0x658/0x810
[<0000000041beecdd>] ksys_write+0xd6/0x1b0
[<0000000023755840>] do_syscall_64+0x38/0x90
[<00000000b2cc2da2>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
ov2740_init_controls() won't clean all the allocated resources in fail
path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to
prevent memleak.
Fixes: 866edc895171 ("media: i2c: Add ov2740 image sensor driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8636c5fc7658c7c6299fb8b352d24ea4b9ba99e2 ]
There is a kmemleak when testing the media/i2c/max9286.c with bpf mock
device:
kmemleak: 5 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
unreferenced object 0xffff88810defc400 (size 256):
comm "python3", pid 278, jiffies 4294737563 (age 31.978s)
hex dump (first 32 bytes):
28 06 a7 0a 81 88 ff ff 00 fe 22 12 81 88 ff ff (.........".....
10 c4 ef 0d 81 88 ff ff 10 c4 ef 0d 81 88 ff ff ................
backtrace:
[<00000000191de6a7>] __kmalloc_node+0x44/0x1b0
[<000000002f4912b7>] kvmalloc_node+0x34/0x180
[<0000000057dc4cae>] v4l2_ctrl_new+0x325/0x10f0 [videodev]
[<0000000026030272>] v4l2_ctrl_new_std+0x16f/0x210 [videodev]
[<00000000f0d9ea2f>] max9286_probe+0x76e/0xbff [max9286]
[<00000000ea8f6455>] i2c_device_probe+0x28d/0x680
[<0000000087529af3>] really_probe+0x17c/0x3f0
[<00000000b08be526>] __driver_probe_device+0xe3/0x170
[<000000004382edea>] driver_probe_device+0x49/0x120
[<000000007bde528a>] __device_attach_driver+0xf7/0x150
[<000000009f9c6ab4>] bus_for_each_drv+0x114/0x180
[<00000000c8aaf588>] __device_attach+0x1e5/0x2d0
[<0000000041cc06b9>] bus_probe_device+0x126/0x140
[<000000002309860d>] device_add+0x810/0x1130
[<000000002827bf98>] i2c_new_client_device+0x359/0x4f0
[<00000000593bdc85>] of_i2c_register_device+0xf1/0x110
max9286_v4l2_register() calls v4l2_ctrl_new_std(), but won't free the
created v412_ctrl when fwnode_graph_get_endpoint_by_id() failed, which
causes the memleak. Call v4l2_ctrl_handler_free() to free the v412_ctrl.
Fixes: 66d8c9d2422d ("media: i2c: Add MAX9286 driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da8e05f84a11c3cc3b0ba0a3c62d20e358002d99 ]
Add check for the return value of devm_regulator_get since it may return
error pointer.
Fixes: 448de7e7850b ("[media] omap3isp: OMAP3 ISP core")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7acd650a0484d92985a0d6d867d980c6dd019885 ]
The memory of ctx is allocated in cal_ctx_create(), but it will
not be freed when cal_ctx_v4l2_init() fails, so add kfree() when
cal_ctx_v4l2_init() fails to fix it.
Fixes: d68a94e98a89 ("media: ti-vpe: cal: Split video device initialization and registration")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 06710cd5d2436135046898d7e4b9408c8bb99446 ]
Few of the H264 encoder registers written were not getting reflected
since the read values were not stored and getting overwritten.
Fixes: 6a9c6f681257 ("[media] s5p-mfc: Add variants to access mfc registers")
Cc: stable@vger.kernel.org
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d3f3c2fe54e30b0636496d842ffbb5ad3a547f9b ]
During error on CLOSE_INSTANCE command, ctx_work_bits was not getting
cleared. During consequent mfc execution NULL pointer dereferencing of
this context led to kernel panic. This patch fixes this issue by making
sure to clear ctx_work_bits always.
Fixes: 818cd91ab8c6 ("[media] s5p-mfc: Extract open/close MFC instance commands")
Cc: stable@vger.kernel.org
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d8a46bc4e1e0446459daa77c4ce14218d32dacf9 ]
On receiving last buffer driver puts MFC to MFCINST_FINISHING state which
in turn skips transferring of frame from SRC to REF queue. This causes
driver to stop MFC encoding and last frame is lost.
This patch guarantees safe handling of frames during MFCINST_FINISHING and
correct clearing of workbit to avoid early stopping of encoding.
Fixes: af9357467810 ("[media] MFC: Add MFC 5.1 V4L2 driver")
Cc: stable@vger.kernel.org
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fd3d91ab1c6ab0628fe642dd570b56302c30a792 upstream.
The dvb-core tries to sync the releases of opened files at
dvb_dmxdev_release() with two refcounts: dvbdev->users and
dvr_dvbdev->users. A problem is present in those two syncs: when yet
another dvb_demux_open() is called during those sync waits,
dvb_demux_open() continues to process even if the device is being
closed. This includes the increment of the former refcount, resulting
in the leftover refcount after the sync of the latter refcount at
dvb_dmxdev_release(). It ends up with use-after-free, since the
function believes that all usages were gone and releases the
resources.
This patch addresses the problem by adding the check of dmxdev->exit
flag at dvb_demux_open(), just like dvb_dvr_open() already does. With
the exit flag check, the second call of dvb_demux_open() fails, hence
the further corruption can be avoided.
Also for avoiding the races of the dmxdev->exit flag reference, this
patch serializes the dmxdev->exit set up and the sync waits with the
dmxdev->mutex lock at dvb_dmxdev_release(). Without the mutex lock,
dvb_demux_open() (or dvb_dvr_open()) may run concurrently with
dvb_dmxdev_release(), which allows to skip the exit flag check and
continue the open process that is being closed.
CVE-2022-41218 is assigned to those bugs above.
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/20220908132754.30532-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b0d0477fce747d4137aa65856318b55fba72198 upstream.
In function dvb_register_device() -> dvb_register_media_device() ->
dvb_create_media_entity(), dvb->entity is allocated and initialized. If
the initialization fails, it frees the dvb->entity, and return an error
code. The caller takes the error code and handles the error by calling
dvb_media_device_free(), which unregisters the entity and frees the
field again if it is not NULL. As dvb->entity may not NULLed in
dvb_create_media_entity() when the allocation of dvbdev->pad fails, a
double free may occur. This may also cause an Use After free in
media_device_unregister_entity().
Fix this by storing NULL to dvb->entity when it is freed.
Link: https://lore.kernel.org/linux-media/20220426052921.2088416-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Fixes: fcd5ce4b3936 ("media: dvb-core: fix a memory leak bug")
Cc: stable@vger.kernel.org
Cc: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7392134428c92a4cb541bd5c8f4f5c8d2e88364d upstream.
With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, signed chars need to be marked
explicitly as such. Use `s8` and `u8` types here, since that's what
surrounding code does. This fixes:
drivers/media/dvb-frontends/stv0288.c:471 stv0288_set_frontend() warn: assigning (-9) to unsigned variable 'tm'
drivers/media/dvb-frontends/stv0288.c:471 stv0288_set_frontend() warn: we never enter this loop
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3a664569b71b0a52be5ffb9fb87cc4f83d29bd71 upstream.
Previous commit initialize the dvbdev->ref before the template copy,
which will overwrite the reference and cause refcnt bug.
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 0 PID: 1 at lib/refcount.c:25 refcount_warn_saturate+0x17c/0x1f0 lib/refcount.c:25
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc6-next-20221128-syzkaller #0
...
RIP: 0010:refcount_warn_saturate+0x17c/0x1f0 lib/refcount.c:25
RSP: 0000:ffffc900000678d0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88813ff58000 RSI: ffffffff81660e7c RDI: fffff5200000cf0c
RBP: ffff888022a45010 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff88823ffff000 CR3: 000000000c48e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__refcount_add include/linux/refcount.h:199 [inline]
__refcount_inc include/linux/refcount.h:250 [inline]
refcount_inc include/linux/refcount.h:267 [inline]
kref_get include/linux/kref.h:45 [inline]
dvb_device_get drivers/media/dvb-core/dvbdev.c:585 [inline]
dvb_register_device+0xe83/0x16e0 drivers/media/dvb-core/dvbdev.c:517
...
Just place the kref_init at correct position.
Reported-by: syzbot+fce48a3dd3368645bd6c@syzkaller.appspotmail.com
Fixes: 0fc044b2b5e2 ("media: dvbdev: adopts refcnt to avoid UAF")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7d21e0b1b41b21d628bf2afce777727bd4479aa5 ]
syzbot reported use-after-free in si470x_int_in_callback() [1]. This
indicates that urb->context, which contains struct si470x_device
object, is freed when si470x_int_in_callback() is called.
The cause of this issue is that si470x_int_in_callback() is called for
freed urb.
si470x_usb_driver_probe() calls si470x_start_usb(), which then calls
usb_submit_urb() and si470x_start(). If si470x_start_usb() fails,
si470x_usb_driver_probe() doesn't kill urb, but it just frees struct
si470x_device object, as depicted below:
si470x_usb_driver_probe()
...
si470x_start_usb()
...
usb_submit_urb()
retval = si470x_start()
return retval
if (retval < 0)
free struct si470x_device object, but don't kill urb
This patch fixes this issue by killing urb when si470x_start_usb()
fails and urb is submitted. If si470x_start_usb() fails and urb is
not submitted, i.e. submitting usb fails, it just frees struct
si470x_device object.
Reported-by: syzbot+9ca7a12fd736d93e0232@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=94ed6dddd5a55e90fd4bab942aa4bb297741d977 [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 94d90fb06b94a90c176270d38861bcba34ce377d ]
Syzbot reports a memory leak in "dvb_usb_adapter_init()".
The leak is due to not accounting for and freeing current iteration's
adapter->priv in case of an error. Currently if an error occurs,
it will exit before incrementing "num_adapters_initalized",
which is used as a reference counter to free all adap->priv
in "dvb_usb_adapter_exit()". There are multiple error paths that
can exit from before incrementing the counter. Including the
error handling paths for "dvb_usb_adapter_stream_init()",
"dvb_usb_adapter_dvb_init()" and "dvb_usb_adapter_frontend_init()"
within "dvb_usb_adapter_init()".
This means that in case of an error in any of these functions the
current iteration is not accounted for and the current iteration's
adap->priv is not freed.
Fix this by freeing the current iteration's adap->priv in the
"stream_init_err:" label in the error path. The rest of the
(accounted for) adap->priv objects are freed in dvb_usb_adapter_exit()
as expected using the num_adapters_initalized variable.
Syzbot report:
BUG: memory leak
unreferenced object 0xffff8881172f1a00 (size 512):
comm "kworker/0:2", pid 139, jiffies 4294994873 (age 10.960s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff844af012>] dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:75 [inline]
[<ffffffff844af012>] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:184 [inline]
[<ffffffff844af012>] dvb_usb_device_init.cold+0x4e5/0x79e drivers/media/usb/dvb-usb/dvb-usb-init.c:308
[<ffffffff830db21d>] dib0700_probe+0x8d/0x1b0 drivers/media/usb/dvb-usb/dib0700_core.c:883
[<ffffffff82d3fdc7>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
[<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline]
[<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621
[<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline]
[<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752
[<ffffffff8274af6a>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:782
[<ffffffff8274b786>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:899
[<ffffffff82747c87>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
[<ffffffff8274b352>] __device_attach+0x122/0x260 drivers/base/dd.c:970
[<ffffffff827498f6>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
[<ffffffff82745cdb>] device_add+0x5fb/0xdf0 drivers/base/core.c:3405
[<ffffffff82d3d202>] usb_set_configuration+0x8f2/0xb80 drivers/usb/core/message.c:2170
[<ffffffff82d4dbfc>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
[<ffffffff82d3f49c>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
[<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline]
[<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621
[<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline]
[<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752
Link: https://syzkaller.appspot.com/bug?extid=f66dd31987e6740657be
Reported-and-tested-by: syzbot+f66dd31987e6740657be@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-media/20220824012152.539788-1-mazinalhaddad05@gmail.com
Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0fc044b2b5e2d05a1fa1fb0d7f270367a7855d79 ]
dvb_unregister_device() is known that prone to use-after-free.
That is, the cleanup from dvb_unregister_device() releases the dvb_device
even if there are pointers stored in file->private_data still refer to it.
This patch adds a reference counter into struct dvb_device and delays its
deallocation until no pointer refers to the object.
Link: https://lore.kernel.org/linux-media/20220807145952.10368-1-linma@zju.edu.cn
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a15fe8d9f1bf460a804bcf18a890bfd2cf0d5caa ]
Link: https://lore.kernel.org/linux-media/20220410061925.4107-1-chinayanlei2002@163.com
Signed-off-by: Yan Lei <yan_lei@dahuatech.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6e5e5defdb8b0186312c2f855ace175aee6daf9b ]
As the kmalloc may return NULL pointer,
it should be better to check the return value
in order to avoid NULL poineter dereference,
same as the others.
Fixes: cb1d3a336371 ("[media] coda: add CODA7541 JPEG support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6b8082238fb8bb20f67e46388123e67a5bbc558d ]
As the coda_iram_alloc may return NULL pointer,
it should be better to check the return value
in order to avoid NULL poineter dereference,
same as the others.
Fixes: b313bcc9a467 ("[media] coda: simplify IRAM setup")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 63ff05a1ad242a5a0f897921c87b70d601bda59c ]
In configure_channels(), we should call of_node_put() when breaking
out of for_each_child_of_node() which will automatically increase
and decrease the refcount.
Fixes: c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 57fb35d7542384cac8f198cd1c927540ad38b61a ]
Add missing pci_disable_device() in the error path in saa7164_initdev().
Fixes: 443c1228d505 ("V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f50ebe10f5d8092c37e2bd430c78e03bf38b1e20 ]
Commit 5441e9dafdfc6dc40 ("[media] s5p-mfc: Core support for MFC v7")
which adds mfc v7 support for Exynos3250 and use the same compatible
string as used by Exynos5240 but both the IPs are a bit different in
terms of IP clock.
Add variant driver data based on the new compatible string
"samsung,exynos3250-mfc" for Exynos3250 SoC.
Suggested-by: Alim Akhtar <alim.akhtar@samsung.com>
Fixes: 5441e9dafdfc ("[media] s5p-mfc: Core support for MFC v7")
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ed554fd769a19ea8464bb83e9ac201002ef74ad ]
Wei Chen reports a kernel bug as blew:
general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
...
Call Trace:
<TASK>
__i2c_transfer+0x77e/0x1930 drivers/i2c/i2c-core-base.c:2109
i2c_transfer+0x1d5/0x3d0 drivers/i2c/i2c-core-base.c:2170
i2cdev_ioctl_rdwr+0x393/0x660 drivers/i2c/i2c-dev.c:297
i2cdev_ioctl+0x75d/0x9f0 drivers/i2c/i2c-dev.c:458
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xfb/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd834a8bded
In az6027_i2c_xfer(), if msg[i].addr is 0x99,
a null-ptr-deref will caused when accessing msg[i].buf.
For msg[i].len is 0 and msg[i].buf is null.
Fix this by checking msg[i].len in az6027_i2c_xfer().
Link: https://lore.kernel.org/lkml/CAO4mrfcPHB5aQJO=mpqV+p8mPLNg-Fok0gw8gZ=zemAfMGTzMg@mail.gmail.com/
Link: https://lore.kernel.org/linux-media/20221120065918.2160782-1-zhongbaisong@huawei.com
Fixes: 76f9a820c867 ("V4L/DVB: AZ6027: Initial import of the driver")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a574359e2e71ce16be212df3a082ed60a4bd2c5f ]
In dvb_register_frontend(), dvb_register_device() is possible to fail
but its return value is ignored.
It will cause use-after-free when module is removed, because in
dvb_unregister_frontend() it tries to unregister a not registered
device.
BUG: KASAN: use-after-free in dvb_remove_device+0x18b/0x1f0 [dvb_core]
Read of size 4 at addr ffff88800dff4824 by task rmmod/428
CPU: 3 PID: 428 Comm: rmmod
Call Trace:
<TASK>
...
dvb_remove_device+0x18b/0x1f0 [dvb_core]
dvb_unregister_frontend+0x7b/0x130 [dvb_core]
vidtv_bridge_remove+0x6e/0x160 [dvb_vidtv_bridge]
...
Fix this by catching return value of dvb_register_device().
However the fe->refcount can't be put to zero immediately, because
there are still modules calling dvb_frontend_detach() when
dvb_register_frontend() fails.
Link: https://lore.kernel.org/linux-media/20221108033005.169095-1-chenzhongjin@huawei.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 813ceef062b53d68f296aa3cb944b21a091fabdb ]
The function send_packet() has a race condition as follows:
func send_packet()
{
// do work
call usb_submit_urb()
mutex_unlock()
wait_for_event_interruptible() <-- lock gone
mutex_lock()
}
func vfd_write()
{
mutex_lock()
call send_packet() <- prev call is not completed
mutex_unlock()
}
When the mutex is unlocked and the function send_packet() waits for the
call to complete, vfd_write() can start another call, which leads to the
"URB submitted while active" warning in usb_submit_urb().
Fix this by removing the mutex_unlock() call in send_packet() and using
mutex_lock_interruptible().
Link: https://syzkaller.appspot.com/bug?id=e378e6a51fbe6c5cc43e34f131cc9a315ef0337e
Fixes: 21677cfc562a ("V4L/DVB: ir-core: add imon driver")
Reported-by: syzbot+0c3cb6dc05fbbdc3ad66@syzkaller.appspotmail.com
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f74d3f326d1d5b8951ce263c59a121ecfa65e7c0 ]
In vimc_init(), when platform_driver_register(&vimc_pdrv) fails,
platform_driver_unregister(&vimc_pdrv) is wrongly called rather than
platform_device_unregister(&vimc_pdev), which causes kernel warning:
Unexpected driver unregister!
WARNING: CPU: 1 PID: 14517 at drivers/base/driver.c:270 driver_unregister+0x8f/0xb0
RIP: 0010:driver_unregister+0x8f/0xb0
Call Trace:
<TASK>
vimc_init+0x7d/0x1000 [vimc]
do_one_initcall+0xd0/0x4e0
do_init_module+0x1cf/0x6b0
load_module+0x65c2/0x7820
Fixes: 4a29b7090749 ("[media] vimc: Subdevices as modules")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b3dc3f8e49577840dc8ac8a365c5b3da4edb10b8 ]
dma_alloc_coherent does not return a physical address, but a DMA address,
which might be remapped or have an offset. Passing the DMA address to
vm_iomap_memory is thus broken.
Use the proper dma_mmap_coherent helper instead, and stop passing
__GFP_COMP to dma_alloc_coherent, as the memory management inside the
DMA allocator is hidden from the callers and does not require it.
With this the gfp_t argument to __videobuf_dc_alloc can be removed and
hard coded to GFP_KERNEL.
Fixes: a8f3c203e19b ("[media] videobuf-dma-contig: add cache support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b434422c45282a0573d8123239abc41fa72665d4 ]
A problem about modprobe s5p_fimc failed is triggered with the
following log given:
[ 272.075275] Error: Driver 'exynos4-fimc' is already registered, aborting...
modprobe: ERROR: could not insert 's5p_fimc': Device or resource busy
The reason is that fimc_md_init() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
failed, it returns without unregister fimc_driver, resulting the
s5p_fimc can never be installed later.
A simple call graph is shown as below:
fimc_md_init()
fimc_register_driver() # register fimc_driver
platform_driver_register()
platform_driver_register()
driver_register()
bus_add_driver()
dev = kzalloc(...) # OOM happened
# return without unregister fimc_driver
Fix by unregister fimc_driver when platform_driver_register() returns
error.
Fixes: d3953223b090 ("[media] s5p-fimc: Add the media device driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7f5866dd96d95b74e439f6ee17b8abd8195179fb ]
If device_register() returns error in solo_sysfs_init(), the
name allocated by dev_set_name() need be freed. As comment of
device_register() says, it should use put_device() to give up
the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup().
Fixes: dcae5dacbce5 ("[media] solo6x10: sync to latest code from Bluecherry's git repo")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ba8d9405935097e296bcf7a942c3a01df0edb865 ]
KASAN reports a use-after-free:
BUG: KASAN: use-after-free in dvb_dmxdev_release+0x4d5/0x5d0 [dvb_core]
Call Trace:
...
dvb_dmxdev_release+0x4d5/0x5d0 [dvb_core]
vidtv_bridge_probe+0x7bf/0xa40 [dvb_vidtv_bridge]
platform_probe+0xb6/0x170
...
Allocated by task 1238:
...
dvb_register_device+0x1a7/0xa70 [dvb_core]
dvb_dmxdev_init+0x2af/0x4a0 [dvb_core]
vidtv_bridge_probe+0x766/0xa40 [dvb_vidtv_bridge]
...
Freed by task 1238:
dvb_register_device+0x6d2/0xa70 [dvb_core]
dvb_dmxdev_init+0x2af/0x4a0 [dvb_core]
vidtv_bridge_probe+0x766/0xa40 [dvb_vidtv_bridge]
...
It is because the error handling in vidtv_bridge_dvb_init() is wrong.
First, vidtv_bridge_dmx(dev)_init() will clean themselves when fail, but
goto fail_dmx(_dev): calls release functions again, which causes
use-after-free.
Also, in fail_fe, fail_tuner_probe and fail_demod_probe, j = i will cause
out-of-bound when i finished its loop (i == NUM_FE). And the loop
releasing is wrong, although now NUM_FE is 1 so it won't cause problem.
Fix this by correctly releasing everything.
Fixes: f90cf6079bf6 ("media: vidtv: add a bridge driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c8f3582345e6a69da65ab588f7c4c2d1685b0e80 ]
It is required to return the received buffers, if streaming can not be
started. For instance media_pipeline_start() may fail with EPIPE, if
a link validation between entities is not passed, and in such a case
a user gets a kernel warning:
WARNING: CPU: 1 PID: 520 at drivers/media/common/videobuf2/videobuf2-core.c:1592 vb2_start_streaming+0xec/0x160
<snip>
Call trace:
vb2_start_streaming+0xec/0x160
vb2_core_streamon+0x9c/0x1a0
vb2_ioctl_streamon+0x68/0xbc
v4l_streamon+0x30/0x3c
__video_do_ioctl+0x184/0x3e0
video_usercopy+0x37c/0x7b0
video_ioctl2+0x24/0x40
v4l2_ioctl+0x4c/0x70
The fix is to correct the error path in video_start_streaming() of camss.
Fixes: 0ac2586c410f ("media: camss: Add files which handle the video device nodes")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e38e42c078da4af962d322b97e726dcb2f184e3f ]
devm_pinctrl_get() may return ERR_PTR(-EPROBE_DEFER), add a minus sign
to fix it.
Fixes: 4163851f7b99 ("[media] s5p-fimc: Use pinctrl API for camera ports configuration")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 94a7ad9283464b75b12516c5512541d467cefcf8 ]
syzkaller found a bug:
BUG: unable to handle page fault for address: ffffc9000a3b1000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 100000067 P4D 100000067 PUD 10015f067 PMD 1121ca067 PTE 0
Oops: 0002 [#1] PREEMPT SMP
CPU: 0 PID: 23489 Comm: vivid-000-vid-c Not tainted 6.1.0-rc1+ #512
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:memcpy_erms+0x6/0x10
[...]
Call Trace:
<TASK>
? tpg_fill_plane_buffer+0x856/0x15b0
vivid_fillbuff+0x8ac/0x1110
vivid_thread_vid_cap_tick+0x361/0xc90
vivid_thread_vid_cap+0x21a/0x3a0
kthread+0x143/0x180
ret_from_fork+0x1f/0x30
</TASK>
This is because we forget to check boundary after adjust compose->height
int V4L2_SEL_TGT_CROP case. Add v4l2_rect_map_inside() to fix this problem
for this case.
Fixes: ef834f7836ec ("[media] vivid: add the video capture and output parts")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f98a5c2e1c4396488c27274ba82afc11725a4bcc ]
Commit 1f391df44607 ("media: v4l2-async: Use endpoints in
__v4l2_async_nf_add_fwnode_remote()") changed the data that is stored in
the v4l2_async_subdev internals from the fwnode pointer to the parent
device to the fwnode pointer to the matched endpoint. This broke the
sensor matching code, which relied on the particular fwnode data in the
v4l2_async_subdev internals. Fix this by simply matching the
v4l2_async_subdev pointer, which is already available there.
Reported-by: Daniel Scally <djrscally@gmail.com>
Fixes: fa91f1056f17 ("[media] exynos4-is: Add support for asynchronous subdevices registration")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
