summaryrefslogtreecommitdiff
path: root/drivers/mfd/88pm805.c
AgeCommit message (Collapse)AuthorFilesLines
2015-08-11mfd: Drop owner assignment from i2c_driversKrzysztof Kozlowski1-1/+0
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: 88pm805: msleep(1ms ~ 20ms) may not do what the caller intendsLee Jones1-1/+1
This code has been working since 2012, as limiting the time between 1ms and 3ms is unlikely to do any harm. Soothes checkpatch warning: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt #161: FILE: drivers/mfd/88pm805.c:161: + msleep(1); Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-06mfd: marvell: Constify struct mfd_cell where possibleGeert Uytterhoeven1-1/+1
As of commit 03e361b25ee8dfb1fd9b890072c23c4aae01c6c7 ("mfd: Stop setting refcounting pointers in original mfd_cell arrays"), the "cell" parameter of mfd_add_devices() is "const" again. Hence make all cell data passed to mfd_add_devices() const where possible. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02mfd: 88pm805: Fix potential NULL pdata dereferenceChao Xie1-1/+1
User pass platform data to device, and platform data may be NULL. Add the check for pdata. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31mfd: Use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-06-18mfd: 88pm80x: Change chip id definition and detectionChao Xie1-13/+3
Change the chip id definition and detection and then: 1. We no longer need to add PM800_CHIP_XXX for the coming revision. 2. We no longer need to pass driver_data in i2c_device_id as we can distinguish the chips from the CHIP_ID register. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: 88pm800: 88pm805: Remove "IRQF_TRIGGER_FALLING" flagYi Zhang1-1/+1
88pm800/88pm805 interrupt is asserted low if the events happened. So remove IRQF_TRIGGER_FALLING for irq request. Also, the interrupt wiring is board dependent so do not set IRQF_TRIGGER by default. Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: 88pm80x: Fix driver name for 88pm800 and 88pm805Chao Xie1-1/+1
88pm800 and 88pm805 shouldnot have the same driver name. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: 88pm80x: Remove redundant devm_* callsYi Zhang1-2/+2
devm_* functions are device managed and make error handling and code simpler; it also fix error exit paths Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-29mfd: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29mfd: remove use of __devinitBill Pemberton1-3/+3
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29mfd: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-16mfd: core: Push irqdomain mapping out into devicesMark Brown1-1/+2
Currently the MFD core supports remapping MFD cell interrupts using an irqdomain but only if the MFD is being instantiated using device tree and only if the device tree bindings use the pattern of registering IPs in the device tree with compatible properties. This will be actively harmful for drivers which support non-DT platforms and use this pattern for their DT bindings as it will mean that the core will silently change remapping behaviour and it is also limiting for drivers which don't do DT with this particular pattern. There is also a potential fragility if there are interrupts not associated with MFD cells and all the cells are omitted from the device tree for some reason. Instead change the code to take an IRQ domain as an optional argument, allowing drivers to take the decision about the parent domain for their interrupts. The one current user of this feature is ab8500-core, it has the domain lookup pushed out into the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-16mfd: Fix checking return value of 88pm8xx regmap_read()Axel Lin1-2/+3
Check the return value of regmap_read() rather than the read value. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: 88pm80[05] i2c device_id arrays should be NULL terminatedSamuel Ortiz1-0/+1
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Support 88pm80x in 80x driverQiao Zhou1-0/+299
88PM800 and 88PM805 are two discrete chips used for power management. Hardware designer can use them together or only one of them according to requirement. 88pm80x.c provides common i2c driver handling for both 800 and 805, such as i2c_driver init, regmap init, read/write api etc. 88pm800.c handles specifically for 800, such as chip init, irq init/handle, mfd device register, including rtc, onkey, regulator( to be add later) etc. besides that, 800 has three i2c device, one regular i2c client, two other i2c dummy for gpadc and power purpose. 88pm805.c handles specifically for 805, such as chip init, irq init/handle, mfd device register, including codec, headset/mic detect etc. the i2c operation of both 800 and 805 are via regmap, and 88pm80x-i2c exported a group of r/w bulk r/w and bits set API for facility. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>