summaryrefslogtreecommitdiff
path: root/drivers/mfd/axp20x-rsb.c
AgeCommit message (Collapse)AuthorFilesLines
2024-03-28mfd: axp20x: Add support for AXP717 PMICAndre Przywara1-0/+1
The AXP717a is a PMIC chip produced by X-Powers, it can be connected to an I2C or RSB bus. It's a rather complete PMIC, with many regulators, interrupts, an ADC and battery charging functionality. It also offer USB type-C CC pin handling. Describe the regmap and the MFD bits, along with the registers exposed via I2C or RSB. This covers the regulator, interrupts and power key devices for now. Advertise the device using the new compatible string. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Tested-by: Ryan Walklin <ryan@testtoast.com> Link: https://lore.kernel.org/r/20240310010211.28653-4-andre.przywara@arm.com Signed-off-by: Lee Jones <lee@kernel.org>
2021-01-15mfd/bus: sunxi-rsb: Make .remove() callback return voidUwe Kleine-König1-2/+2
The driver core ignores the return value of struct device_driver::remove because there is only little that can be done. To simplify the quest to make this function return void, let struct sunxi_rsb_driver::remove return void, too. All users already unconditionally return 0, this commit makes this obvious and ensures future users don't behave differently. To simplify even further, make axp20x_device_remove() return void instead of returning 0 unconditionally, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-05mfd: axp20x: Add support for AXP813 PMICChen-Yu Tsai1-0/+1
The X-Powers AXP813 PMIC is normally used with Allwinner's A83T SoC. It has the same range of functions as other X-Powers PMICs, such as DC-DC buck converter and linear regulator outputs, AC-IN and VBUS power supplies, power button trigger, GPIOs, ADCs, and a battery charger. Note that the IRQ table given in the datasheet is incorrect: in IRQ enable/status registers 1, there are separate IRQs for ACIN and VBUS, instead of bits [7:5] being the same as bits [4:2]. So it shares the same IRQs as the AXP803, rather than the AXP288. This patch adds basic mfd support for it, with only the power button enabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27mfd: axp20x: Support AXP803 variantIcenowy Zheng1-0/+1
AXP803 is a new PMIC chip produced by X-Powers, usually paired with A64 via RSB bus. The PMIC itself is like AXP288, but with RSB support and dedicated VBUS and ACIN. Add support for it in the axp20x mfd driver. Currently only power key function is supported. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-09-13mfd: axp20x: Add support for AXP806 PMICChen-Yu Tsai1-0/+1
The X-Powers AXP806 is a new PMIC that is paired with Allwinner's A80 SoC, along with a master AXP809 PMIC. This PMIC has a new register layout, and supports some functions not seen in other X-Powers PMICs, such as master-slave mode, or having multiple AXP806 PMICs on the same bus with address space extension, or supporting both I2C and RSB mode. I2C has not been tested. This patch adds support for the interrupts of the PMIC. A regulator sub-device is enabled, but actual regulator support will come in a later patch. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-19mfd: axp20x: Add support for AXP809 PMICChen-Yu Tsai1-0/+1
The X-Powers AXP809 is a new PMIC that is paired with Allwinner's A80 SoC, along with a slave AXP806 PMIC. This PMIC is quite similar to the earlier AXP223, though the interrupts and regulator have changed a bit. This patch adds support for the interrupts and power button of the PMIC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-12mfd: axp20x: Add support for RSB based AXP223 PMICChen-Yu Tsai1-0/+80
The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs. It is functionally identical to AXP221; only the regulator default voltage/status and the external host interface are different. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>