summaryrefslogtreecommitdiff
path: root/drivers/mfd/tps65218.c
AgeCommit message (Collapse)AuthorFilesLines
2019-02-01mfd: tps65218.c: Add input voltage optionsChristian Hohnstaedt1-0/+89
These options apply to all regulators in this chip. ti,strict-supply-voltage-supervision: Set STRICT flag in CONFIG1 ti,under-voltage-limit-microvolt: Select 2.75, 2.95, 3.25 or 3.35 V UVLO in CONFIG1 ti,under-voltage-hyst-microvolt: Select 200mV or 400mV UVLOHYS in CONFIG2 Signed-off-by: Christian Hohnstaedt <Christian.Hohnstaedt@wago.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()Keerthy1-21/+3
Use devm_regmap_add_irq_chip and clean up error path in probe and also the remove function. Reported-by: Christian Hohnstaedt <Christian.Hohnstaedt@wago.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-10-13mfd: tps65218: Introduce dependency on CONFIG_OFKeerthy1-8/+0
Currently the driver boots only via device tree hence add a dependency on CONFIG_OF. This leaves with a bunch of unused code so clean that up. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-26mfd: tps65218: Use mfd_add_devices instead of of_platform_populateKeerthy1-2/+16
mfd_add_devices enables parsing device tree nodes without compatibles for regulators and gpio modules. Replace of_platform_populate with mfd_add_devices. mfd_cell currently is populated with regulators, gpio and powerbutton. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-26mfd: tps65218: Remove redundant read wrapperKeerthy1-16/+2
Currently read directly calls the repmap read function. Hence remove the redundant wrapper and use regmap read wherever needed. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-10mfd: tps65218: add version check to the PMIC probeTero Kristo1-0/+9
Version information will be needed to handle some error cases under the regulator driver, so store the information once during MFD probe. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11mfd: Export OF module alias information in missing driversJavier Martinez Canillas1-0/+1
The I2C core always reports the MODALIAS uevent as "i2c:<client name" regardless if the driver was matched using the I2C id_table or the of_match_table. So technically there's no need for a driver to export the OF table since currently it's not used. In fact, the I2C device ID table is mandatory for I2C drivers since a i2c_device_id is passed to the driver's probe function even if the I2C core used the OF table to match the driver. And since the I2C core uses different tables, OF-only drivers needs to have duplicated data that has to be kept in sync and also the dev node compatible manufacturer prefix is stripped when reporting the MODALIAS. To avoid the above, the I2C core behavior may be changed in the future to not require an I2C device table for OF-only drivers and report the OF module alias. So, it's better to also export the OF table to prevent breaking module autoloading if that happens. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-11mfd: Drop owner assignment from i2c_driversKrzysztof Kozlowski1-1/+0
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-01-22mfd: tps65218: Constify struct regmap_configKrzysztof Kozlowski1-1/+1
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-01-20mfd: tps65218: Make INT1 our status_base registerFelipe Balbi1-0/+1
If we don't tell regmap-irq that our first status register is at offset 1, it will try to read offset zero, which is the chipid register. Fixes: 44b4dc6 mfd: tps65218: Add driver for the TPS65218 PMIC Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-01-20mfd: tps65218: Make INT[12] and STATUS registers volatileFelipe Balbi1-0/+11
STATUS register can be modified by the HW, so we should bypass cache because of that. In the case of INT[12] registers, they are the ones that actually clear the IRQ source at the time they are read. If we rely on the cache for them, we will never be able to clear the interrupt, which will cause our IRQ line to be disabled due to IRQ throttling. Fixes: 44b4dc6 mfd: tps65218: Add driver for the TPS65218 PMIC Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03mfd: tps65218: Terminate of match tableStephen Boyd1-0/+1
Failure to terminate this match table can lead to boot failures depending on where the compiler places the match table. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: tps65218: Add driver for the TPS65218 PMICKeerthy1-0/+282
The TPS65218 chip is a power management IC for Portable Navigation Systems and Tablet Computing devices. It contains the following components: - Regulators. - Over Temperature warning and Shut down. This patch adds support for tps65218 mfd device. At this time only the regulator functionality is made available. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>