summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2015-11-07Merge tag 'asm-generic-for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "The asm-generic changes for 4.4 are mostly a series from Christoph Hellwig to clean up various abuses of headers in there. The patch to rename the io-64-nonatomic-*.h headers caused some conflicts with new users, so I added a workaround that we can remove in the next merge window. The only other patch is a warning fix from Marek Vasut" * tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: temporarily add back asm-generic/io-64-nonatomic*.h asm-generic: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations gpio-mxc: stop including <asm-generic/bug> n_tracesink: stop including <asm-generic/bug> n_tracerouter: stop including <asm-generic/bug> mlx5: stop including <asm-generic/kmap_types.h> hifn_795x: stop including <asm-generic/kmap_types.h> drbd: stop including <asm-generic/kmap_types.h> move count_zeroes.h out of asm-generic move io-64-nonatomic*.h out of asm-generic
2015-11-06mfd: avoid newly introduced compiler warningLinus Torvalds1-2/+0
Commit b158b69a3765 ("mfd: rtsx: Simplify function return logic") removed the use of the 'err' variable, but left the variable itself around, resulting in gcc quite reasonably warning: drivers/mfd/rtsx_pcr.c: In function ‘rtsx_pci_set_pull_ctl’: drivers/mfd/rtsx_pcr.c:565:6: warning: unused variable ‘err’ [-Wunused-variable] int err; ^ Get rid of the unused variable, and avoid the new warning. Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06Merge tag 'mfd-for-linus-4.4' of ↵Linus Torvalds48-374/+1550
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support: - Add support for 88pm860; 88pm80x - Add support for 24c08 EEPROM; at24 - Add support for Broxton Whiskey Cove; intel* - Add support for RTS522A; rts5227 - Add support for I2C devices; intel_quark_i2c_gpio New Functionality: - Add microphone support; arizona - Add general purpose switch support; arizona - Add fuel-gauge support; da9150-core - Add shutdown support; sec-core - Add charger support; tps65217 - Add flexible serial communication unit support; atmel-flexcom - Add power button support; axp20x - Add led-flash support; rt5033 Core Frameworks: - Supply a generic macro for defining Regmap IRQs - Rework ACPI child device matching Fix-ups: - Use Regmap to access registers; tps6105x - Use DEFINE_RES_IRQ_NAMED() macro; da9150 - Re-arrange device registration order; intel_quark_i2c_gpio - Allow OF matching; cros_ec_i2c, atmel-hlcdc, hi6421-pmic, max8997, sm501 - Handle deferred probe; twl6040 - Improve accuracy of headphone detect; arizona - Unnecessary MODULE_ALIAS() removal; bcm590xx, rt5033 - Remove unused code; htc-i2cpld, arizona, pcf50633-irq, sec-core - Simplify code; kempld, rts5209, da903x, lm3533, da9052, arizona - Remove #iffery; arizona - DT binding adaptions; many Bug Fixes: - Fix possible NULL pointer dereference; wm831x, tps6105x - Fix 64bit bug; intel_soc_pmic_bxtwc - Fix signedness issue; arizona" * tag 'mfd-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits) bindings: mfd: s2mps11: Add documentation for s2mps15 PMIC mfd: sec-core: Remove unused s2mpu02-rtc and s2mpu02-clk children extcon: arizona: Add extcon specific device tree binding document MAINTAINERS: Add binding docs for Cirrus Logic/Wolfson Arizona devices mfd: arizona: Remove bindings covered in new subsystem specific docs mfd: rt5033: Add RT5033 Flash led sub device mfd: lpss: Add Intel Broxton PCI IDs mfd: lpss: Add Broxton ACPI IDs mfd: arizona: Signedness bug in arizona_runtime_suspend() mfd: axp20x: Add a cell for the power button part of the, axp288 PMICs mfd: dt-bindings: Document pulled down WRSTBI pin on S2MPS1X mfd: sec-core: Disable buck voltage reset on watchdog falling edge mfd: sec-core: Dump PMIC revision to find out the HW mfd: arizona: Use correct type ID for device tree config mfd: arizona: Remove use of codec build config #ifdefs mfd: arizona: Simplify adding subdevices mfd: arizona: Downgrade type mismatch messages to dev_warn mfd: arizona: Factor out checking of jack detection state mfd: arizona: Factor out DCVDD isolation control mfd: Make TPS6105X select REGMAP_I2C ...
2015-11-06Merge tag 'spi-v4.4' of ↵Linus Torvalds8-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
2015-11-06Merge tag 'regulator-v4.4' of ↵Linus Torvalds1-65/+13
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This is quite a quiet release in terms of volume of patches but it includes a couple of really nice core changes - the work Sascha has done in particular is something I've wanted to get done for a long time but just never got round to myself. Highlights include: - Support from Sascha Hauer for setting the voltage of parent supplies based on requests from their children. This is used both to allow set_voltage() to work through a dumb switch and to improve the efficiency of systems where DCDCs are used to supply LDOs by minimising the voltage drop over the LDOs. - Removal of regulator_list by Tomeu Vizoso, meaning we're not duplicating the device list maintained by the driver core. - Support for Wolfson/Cirrus WM8998 and WM1818" * tag 'regulator-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (29 commits) regulator: Use regulator_lock_supply() for get_voltage() too regulator: arizona: Add regulator specific device tree binding document regulator: stw481x: compile on COMPILE_TEST regulator: qcom-smd: Correct set_load() unit regulator: core: Propagate voltage changes to supply regulators regulator: core: Factor out regulator_map_voltage regulator: i.MX anatop: Allow supply regulator regulator: introduce min_dropout_uV regulator: core: create unlocked version of regulator_set_voltage regulator: arizona-ldo1: Fix handling of GPIO 0 regulator: da9053: Update regulator for DA9053 BC silicon support regulator: max77802: Separate sections for nodes and properties regulator: max77802: Add input supply properties to DT binding doc regulator: axp20x: set supply names for AXP22X DC1SW/DC5LDO internally regulator: axp20x: Drop AXP221 DC1SW and DC5LDO regulator supplies from bindings mfd: tps6105x: Use i2c regmap to access registers regulator: act8865: add DT binding for property "active-semi,vsel-high" regulator: act8865: support output voltage by VSET2[] bits regulator: arizona: add support for WM8998 and WM1814 regulator: core: create unlocked version of regulator_list_voltage ...
2015-11-05Merge tag 'char-misc-4.4-rc1' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver update for 4.4-rc1. Lots of different driver and subsystem updates, hwtracing being the largest with the addition of some new platforms that are now supported. Full details in the shortlog. All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits) fpga: socfpga: Fix check of return value of devm_request_irq lkdtm: fix ACCESS_USERSPACE test mcb: Destroy IDA on module unload mcb: Do not return zero on error path in mcb_pci_probe() mei: bus: set the device name before running fixup mei: bus: use correct lock ordering mei: Fix debugfs filename in error output char: ipmi: ipmi_ssif: Replace timeval with timespec64 fpga: zynq-fpga: Fix issue with drvdata being overwritten. fpga manager: remove unnecessary null pointer checks fpga manager: ensure lifetime with of_fpga_mgr_get fpga: zynq-fpga: Change fw format to handle bin instead of bit. fpga: zynq-fpga: Fix unbalanced clock handling misc: sram: partition base address belongs to __iomem space coresight: etm3x: adding documentation for sysFS's cpu interface vme: 8-bit status/id takes 256 values, not 255 fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000 ARM: zynq: dt: Updated devicetree for Zynq 7000 platform. ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager. ver_linux: proc/modules, limit text processing to 'sed' ...
2015-11-04Merge remote-tracking branches 'regulator/topic/supply', ↵Mark Brown1-65/+13
'regulator/topic/tps6105x' and 'regulator/topic/tps65023' into regulator-next
2015-11-04Merge remote-tracking branches 'spi/topic/omap-100k', ↵Mark Brown8-8/+0
'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next
2015-10-30mfd: sec-core: Remove unused s2mpu02-rtc and s2mpu02-clk childrenKrzysztof Kozlowski1-5/+2
The commit 54e8827d5f0e ("mfd: sec-core: Add support for S2MPU02 device") added new MFD child devices for S2MPU02: RTC and clock provider (the clock provider with new compatible). However support for these devices was not added to existing drivers (rtc-s5m, clk-s2mps11). New drivers were not submitted neither. This means that the name of children devices is completely unused. The "samsung,s2mpu02-clk" compatible remains undocumented so it is unclear what is provided by that compatible. Clean up this by removing unused child devices and undocumented compatible. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: rt5033: Add RT5033 Flash led sub deviceIngi Kim1-0/+3
This patch adds rt5033-led sub device to support it. Signed-off-by: Ingi Kim <ingi2.kim@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: lpss: Add Intel Broxton PCI IDsAndy Shevchenko1-0/+45
Intel Broxton has the same LPSS block than Intel Sunrisepoint so add Broxton PCI IDs to the list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: lpss: Add Broxton ACPI IDsMika Westerberg1-0/+16
Intel Broxton has the same LPSS block than Intel Sunrisepoint so add Broxton ACPI IDs to the list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: arizona: Signedness bug in arizona_runtime_suspend()Dan Carpenter1-1/+1
The "jd_active" variable needs to be signed for the error handling to work. Fixes: 143e5887ae57 ('mfd: arizona: factor out checking of jack detection state') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: axp20x: Add a cell for the power button part of the, axp288 PMICsBorun Fu1-0/+20
This patch adds the mfd cell info for axp288 power key device. Signed-off-by: Borun Fu <borun.fu@linux.intel.com> Signed-off-by: Fei Yang <fei.yang@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: sec-core: Disable buck voltage reset on watchdog falling edgeKrzysztof Kozlowski1-0/+26
The WRSTBI bit (disabled by default but enabled by bootloader), when set, is responsible for resetting voltages to default values of certain bucks on falling edge of Warm Reset Input pin from AP. However on some boards (with S2MPS13) the pin is pulled down so any suspend will effectively trigger the reset of bucks supplying the power to the little and big cores. In the same time when resuming, these bucks must provide voltage greater or equal to voltage before suspend to match the frequency chosen by cpufreq. If voltage (default value of voltage after reset) is lower than one set by cpufreq before suspend, then system will hang during resuming. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: sec-core: Dump PMIC revision to find out the HWKrzysztof Kozlowski1-0/+10
There are different revisions of the same chipset. For example S2MPS13 has more than 2 revisions. They differ slightly in regulator constraints. Print the revision number to easily find which PMIC is used on the board. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: arizona: Use correct type ID for device tree configRichard Fitzgerald2-6/+4
In the case of a device tree config the code uses the device ID from the DT entry to check which codec is required but when storing the ID into struct arizona it was always using the non-DT SPI device table to get an ID. This patch changes the code to store the correct ID into struct arizona. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: arizona: Remove use of codec build config #ifdefsRichard Fitzgerald3-78/+97
Remove the use of #ifdefs around each case statement of the chip ID and type validation switches. We must ensure that the contained code still compiles to nothing if support for that codec was not built into the kernel, to prevent creation of link references to missing functions. So the ifdefs are replaced with a use of the IS_ENABLED() macro. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: arizona: Simplify adding subdevicesRichard Fitzgerald1-22/+14
The code was using a switch on the code type to execute one of several mfd_add_devices() calls. We're already switching on the code type earlier in the function to select the correct patch function so we can roll selection of the mfd device table into the same switch. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: arizona: Downgrade type mismatch messages to dev_warnRichard Fitzgerald1-8/+8
If the declared codec type doesn't match the detected type we issue a log message but carry on registering the device, so a dev_warn() is appropriate rather than a dev_err() Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: arizona: Factor out checking of jack detection stateRichard Fitzgerald1-9/+32
Currently runtime_suspend will fully power off the codec if the jack detection is not enabled. Not all future codecs will have jack detection so to prepare for these codecs this patch factors out the check so that it be called as needed in the existing codec-specific switch cases. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: arizona: Factor out DCVDD isolation controlRichard Fitzgerald1-46/+62
Currently DCVDD isolation is enabled and disabled for runtime_suspend and runtime_resume. Future codecs will not have the isolation control so to prepare for these codecs this patch factors out the isolation control allowing it to be called as needed in the existing codec-specific switch cases. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: Make TPS6105X select REGMAP_I2CAxel Lin1-0/+1
This is required since commit 7e5071199355 ("mfd: tps6105x: Use i2c regmap to access registers"). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: lm3533: Fix unused variable build warningSudip Mukherjee1-1/+0
We were getting build warning about unused variable 'ret'. The commit c749db571dcf has removed the use of ret but missed removing the variable which is unused now. Fixes: c749db571dcf ("mfd: lm3533: Simplify function return logic") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: rtsx: Add support for rts522AMicky Ching4-5/+87
rts522a(rts5227s) is derived from rts5227, and mainly same with rts5227. Add it to file mfd/rts5227.c to support this chip. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: da9062-core: Rename get_device_type to da9062_get_device_typeAxel Lin1-2/+2
Rename get_device_type() to da9062_get_device_type(). This function is only used in this file so make it static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: Kconfig: Compile MFD_STW481X with COMPILE_TESTLuis de Bethencourt1-1/+1
The driver depends on ARCH_NOMADIK but there isn't a build dependency so it's a good idea to allow the driver to always be built when the COMPILE_TEST option is enabled. That way, the driver can be built with a config generated by make allyesconfig and check if a patch would break the build. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: da9053: Addition of extra registers for GPIOs 8-13Steve Twiss1-0/+6
Definitions for GPIO registers 8, 9, 10, 11, 12 and 13 are added into the register header file. - DA9052_GPIO_8_9_REG 25 - DA9052_GPIO_10_11_REG 26 - DA9052_GPIO_12_13_REG 27 A modification is also made to the MFD core code to define these registers as readable and writable. The functions for da9052_reg_readable() and da9052_reg_writeable() have had their case statements altered to include these new registers. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: atmel-flexcom: Add a driver for Atmel Flexible Serial Communication UnitCyrille Pitchen3-0/+116
This driver supports the new Atmel Flexcom. The Flexcom is a wrapper which integrates one SPI controller, one I2C controller and one USART. Only one function can be enabled at a time. This driver selects the function once for all, when the Flexcom is probed, according to the value of the new "atmel,flexcom-mode" device tree property. This driver has chosen to present the Flexcom to the system as a MFD so the implementation is seamless for the existing Atmel SPI, I2C and USART drivers. Also the Flexcom embeds FIFOs: the latest patches of the SPI, I2C and USART drivers take advantage of this new feature. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: intel_soc_pmic_bxtwc: 64 bit bug in bxtwc_val_store()Dan Carpenter1-4/+3
The call to kstrtoul() will corrupt memory on 64 bit systems because an int is 4 bytes and a long is 8. Also it's not a good idea to let users trigger a dev_err() because it just ends up flooding /var/log/messages so I removed the printk. Fixes: 2ddd2086ea9c ('mfd: add Intel Broxton Whiskey Cove PMIC driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: da9052: Simplify function return logicJavier Martinez Canillas2-10/+2
The invoked functions already return zero on success or a negative errno code so there is no need to open code the logic in the caller. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: lm3533: Simplify function return logicJavier Martinez Canillas1-10/+2
The invoked functions already return zero on success or a negative errno code so there is no need to open code the logic in the caller. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: da903x: Simplify function return logicJavier Martinez Canillas1-5/+1
The invoked function already returns zero on success or a negative errno code so there is no need to open code the logic in the caller. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: rtsx: Simplify function return logicJavier Martinez Canillas5-25/+5
The invoked functions already return zero on success or a negative errno code so there is no need to open code the logic in the caller. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: kempld-core: Simplify function return logicJavier Martinez Canillas1-12/+2
The invoked functions already return zero on success or a negative errno code so there is no need to open code the logic in the caller. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: pcf50633: Remove unneded ret variableJavier Martinez Canillas1-2/+2
The ret variable is not needed since is not used in the function. Remove the variable and just return 0 instead. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: arizona: Remove unneded ret variableJavier Martinez Canillas1-3/+1
The ret variable is not needed since is not used in the function. Remove the variable and just return 0 instead. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: htc-i2cpld: Remove unneded ret variableJavier Martinez Canillas1-2/+1
The ret variable is not needed since is not used in the function. Remove the variable and just return 0 instead. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: tps6105x: Fix possible NULL pointer accessGrigoryev Denis1-29/+43
tps6105 driver provides two cells. One is for GPIO and another one is for selected mode depending on platform data. When tps6105x is used in GPIO-only mode, this driver calls mfd_add_devices() with mfd_cell .name == NULL. This value causes an oops in platform_device_register() later. The following patch adds a mfd_cell for each possible mode thereby excluding .name assignment in runtime. Signed-off-by: Denis Grigoryev <grigoryev@fastwel.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: qcom_rpm: Drop use of IRQF_NO_SUSPEND flagSudeep Holla1-1/+1
The driver handles wakeup irq correctly using irq_set_irq_wake. There's no need to use IRQF_NO_SUSPEND while registering the interrupt. This patch removes the use of IRQF_NO_SUSPEND flag. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: lpc_ich: Separate device cells for clarityAaron Sierra1-24/+18
The lpc_ich_cells array gives the wrong impression about the relationship between the watchdog and GPIO devices. They are completely distinct devices, so this patch separates the array into distinct mfd_cell structs per device. A side effect of removing the array, is that the lpc_cells enum is no longer needed. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: add Intel Broxton Whiskey Cove PMIC driverQipeng Zha2-0/+479
Add MFD core driver for Intel Broxton Whiskey Cove PMIC, which is specially accessed by hardware IPC, not a generic I2C device Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis8-8/+0
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-26mfd: rt5033: Remove unnecessary MODULE_ALIAS()Javier Martinez Canillas1-1/+0
The driver has a I2C device id table that is used to create the module aliases which already contains a "rt5033". So the alias is not needed. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-26mfd: bcm590xx: Remove unnecessary MODULE_ALIAS()Javier Martinez Canillas1-1/+0
The driver has a I2C device id table that is used to create the module aliases and also "bcm590xx" isn't a supported I2C id, so it's never used. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-26mfd: tps65217: Add battery charger as subdeviceEnric Balletbo i Serra1-0/+4
Add tps65217 battery charger subdevice. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-26mfd: wm8998: Fixup register defaults/readablesCharles Keepax1-8/+0
Remove defaults for a bunch of volatile registers and remove ARIZONA_CTRL_IF_SPI_CFG_1 from the readable list since it doesn't exist on wm8998 which is I2C only. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-26mfd: arizona: Add register bits to support the ANC blockCharles Keepax1-0/+186
Some Arizona devices have a hardware ANC block present. This patch adds the registers necessary to configure this hardware block. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-26mfd: arizona: Fix typo in arizona_irq_mapCharles Keepax1-1/+1
The type of the data for the main Arizona IRQ chip should be struct arizona not struct regmap_irq_chip_data. The bug is harmless but should probably be corrected anyway. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-26mfd: wm831x: Fix possible NULL pointer dereferenceJavier Martinez Canillas1-1/+3
The driver always checks for pdata being NULL except in one place. Add a check to prevent a possible NULL pointer deference error. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>