summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2015-07-02Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "This contains: - a series of fixes for interrupt drivers to prevent a potential race when installing a chained interrupt handler - a fix for cpumask pointer misuse - a fix for using the wrong interrupt number from struct irq_data - removal of unused code and outdated comments - a few new helper functions which allow us to cleanup the interrupt handling code further in 4.3 I decided against doing the cleanup at the end of this merge window and rather do the preparatory steps for 4.3, so we can run the final ABI change at the end of the 4.3 merge window with less risk" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) ARM/LPC32xx: Use irq not hwirq for __irq_set_handler_locked() genirq: Implement irq_set_handler_locked()/irq_set_chip_handler_name_locked() genirq: Introduce helper irq_desc_get_irq() genirq: Remove irq_node() genirq: Clean up outdated comments related to include/linux/irqdesc.h mn10300: Fix incorrect use of irq_data->affinity MIPS/ralink: Fix race in installing chained IRQ handler MIPS/pci: Fix race in installing chained IRQ handler MIPS/ath25: Fix race in installing chained IRQ handler MIPS/ath25: Fix race in installing chained IRQ handler m68k/psc: Fix race in installing chained IRQ handler avr32/at32ap: Fix race in installing chained IRQ handler sh/intc: Fix race in installing chained IRQ handler sh/intc: Fix potential race in installing chained IRQ handler pinctrl/sun4i: Fix race in installing chained IRQ handler pinctrl/samsung: Fix race in installing chained IRQ handler pinctrl/samsung: Fix race in installing chained IRQ handler pinctrl/exynos: Fix race in installing chained IRQ handler pinctrl/st: Fix race in installing chained IRQ handler pinctrl/adi2: Fix race in installing chained IRQ handler ...
2015-06-26Merge tag 'rtc-v4.2-1' of ↵Linus Torvalds1-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Core: - Coding style and whitespace fixes (interface, Makefile and Kconfig) - New rtc_tm_sub() helper - New CONFIG_RTC_SYSTOHC_DEVICE option - Removed rtc_set_mmss() New drivers: - Mediatek MT6397 - Cortina Gemini Drivers: - Year 2106 fixes for isl1208, pcf8563 and sunxi - update author email for at32ap700x and efi - ds1307: alarm fix - efi: use correct EFI 'epoch' - hym8563: make irq optional - imxdi: cleanups and better handling of the security/tamper monitoring - snvs: fix wakealarm - Compilation fixes or warning removal for gemini, mt6397, palmas, pfc8563 - Trivial cleanups for ab8500, ds1216, ds1286, ds1672, ep93xx, hid-sensor-time, max6900, max8998, max77686, max77802, mc13xxx, mv, mxc, s3c, spear, v3020 - Kconfig fixes for stmp3xxx and xgene" * tag 'rtc-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (48 commits) rtc: remove useless I2C dependencies rtc: whitespace fixes rtc: Properly sort Makefile MAINTAINERS: Add RTC subsystem repository rtc: pfc8563: fix uninitialized variable warning rtc: ds1307: Enable the mcp794xx alarm after programming time rtc: hym8563: make the irq optional rtc: gemini: fix cocci warnings rtc: mv: correct 24 hour error message rtc: mv: use BIT() rtc: efi: use correct EFI 'epoch' rtc: interface: Remove rtc_set_mmss() sparc: time: Replace update_persistent_clock() with CONFIG_RTC_SYSTOHC rtc: NTP: Add CONFIG_RTC_SYSTOHC_DEVICE for NTP synchronization rtc: sunxi: Replace deprecated rtc_tm_to_time() rtc: isl1208: Replace deprecated rtc_tm_to_time() rtc: Introduce rtc_tm_sub() helper function rtc: pcf8563: Replace deprecated rtc_time_to_tm() and rtc_tm_to_time() rtc: palmas: Initialise bb_charging flag before using it rtc: simplify use of devm_ioremap_resource ...
2015-06-25mfd/asic3: Fix race in installing chained IRQ handlerThomas Gleixner1-2/+1
Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Search and conversion was done with coccinelle: @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); | -irq_set_chained_handler(E1, E3); ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); ... | -irq_set_chained_handler(E1, E3); ... ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Lee Jones <lee.jones@linaro.org>
2015-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+4
Pull networking updates from David Miller: 1) Add TX fast path in mac80211, from Johannes Berg. 2) Add TSO/GRO support to ibmveth, from Thomas Falcon 3) Move away from cached routes in ipv6, just like ipv4, from Martin KaFai Lau. 4) Lots of new rhashtable tests, from Thomas Graf. 5) Run ingress qdisc lockless, from Alexei Starovoitov. 6) Allow servers to fetch TCP packet headers for SYN packets of new connections, for fingerprinting. From Eric Dumazet. 7) Add mode parameter to pktgen, for testing receive. From Alexei Starovoitov. 8) Cache access optimizations via simplifications of build_skb(), from Alexander Duyck. 9) Move page frag allocator under mm/, also from Alexander. 10) Add xmit_more support to hv_netvsc, from KY Srinivasan. 11) Add a counter guard in case we try to perform endless reclassify loops in the packet scheduler. 12) Extern flow dissector to be programmable and use it in new "Flower" classifier. From Jiri Pirko. 13) AF_PACKET fanout rollover fixes, performance improvements, and new statistics. From Willem de Bruijn. 14) Add netdev driver for GENEVE tunnels, from John W Linville. 15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso. 16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet. 17) Add an ECN retry fallback for the initial TCP handshake, from Daniel Borkmann. 18) Add tail call support to BPF, from Alexei Starovoitov. 19) Add several pktgen helper scripts, from Jesper Dangaard Brouer. 20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa. 21) Favor even port numbers for allocation to connect() requests, and odd port numbers for bind(0), in an effort to help avoid ip_local_port_range exhaustion. From Eric Dumazet. 22) Add Cavium ThunderX driver, from Sunil Goutham. 23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata, from Alexei Starovoitov. 24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai. 25) Double TCP Small Queues default to 256K to accomodate situations like the XEN driver and wireless aggregation. From Wei Liu. 26) Add more entropy inputs to flow dissector, from Tom Herbert. 27) Add CDG congestion control algorithm to TCP, from Kenneth Klette Jonassen. 28) Convert ipset over to RCU locking, from Jozsef Kadlecsik. 29) Track and act upon link status of ipv4 route nexthops, from Andy Gospodarek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits) bridge: vlan: flush the dynamically learned entries on port vlan delete bridge: multicast: add a comment to br_port_state_selection about blocking state net: inet_diag: export IPV6_V6ONLY sockopt stmmac: troubleshoot unexpected bits in des0 & des1 net: ipv4 sysctl option to ignore routes when nexthop link is down net: track link-status of ipv4 nexthops net: switchdev: ignore unsupported bridge flags net: Cavium: Fix MAC address setting in shutdown state drivers: net: xgene: fix for ACPI support without ACPI ip: report the original address of ICMP messages net/mlx5e: Prefetch skb data on RX net/mlx5e: Pop cq outside mlx5e_get_cqe net/mlx5e: Remove mlx5e_cq.sqrq back-pointer net/mlx5e: Remove extra spaces net/mlx5e: Avoid TX CQE generation if more xmit packets expected net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq() net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device ...
2015-06-25mfd: provide RTC resource in MT6397 MFDEddie Huang1-0/+18
Provide MT6397 RTC interrupt, base address, and register in MT6397 MFD. Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-24Merge tag 'mfd-for-linus-4.2' of ↵Linus Torvalds40-294/+1134
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - Constify structures; throughout the subsystem - Move support to DT in; cros_ec - DT changes and documentation; cros-ec, max77693, max77686, arizona, da9063 - ACPI changes and documentation; mfd-core - Use different platform specific API in; cros_ec_*, arizona-core - Remove unused parent field from; cros_ec_i2c - Add wake-up/reset delay in; cross_ec_spi, arizona-core - Staticise structures/functions in; cros_ec - Remove redundant code; arizona-core, max77686 - Bugfix; twl4030-power - Allow compile test; aat2870, tps65910 - MAINTAINERS adaptions; samsung, syscon - Resource Management (devm_*); arizona-core - Refactor Reset code; arizona-core - Insist on at least one full boot; arizona-core - Trivial formatting; arizona-core - Add low-power-sleep; arizona-core - IRQ ONESHOT changes; twl4030-irq, mc13xxx-core, wm831x-auxadc, htc-i2cpld, wm8350-core, ab8500-debugfs, ab8500-gpadc, si476x-i2c (Re-)moved drivers: - Move protocol helpers out to drivers/platform; cros_ec New drivers/supported devices: - Add support for AXP22x into axp20x - Add support for OnKey into da9063-core - Add support for Pinctrl into mt6397-core - New STMicroelectronics LPC Watchdog driver - New STMicroelectronics LPC Real-Time Clock driver" * tag 'mfd-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (59 commits) mfd: lpc_ich: Assign subdevice ids automatically mfd: si476x-i2c: Pass the IRQF_ONESHOT flag mfd: ab8500-gpadc: Pass the IRQF_ONESHOT flag mfd: ab8500-debugfs: Pass the IRQF_ONESHOT flag mfd: wm8350-core: Pass the IRQF_ONESHOT flag mfd: htc-i2cpld: Pass the IRQF_ONESHOT flag mfd: wm831x-auxadc: Pass the IRQF_ONESHOT flag mfd: mc13xxx-core: Pass the IRQF_ONESHOT flag mfd: twl4030-irq: Pass the IRQF_ONESHOT flag mfd: mt6397-core: Add GPIO sub-module support mfd: arizona: Add convience defines for micd_rate/micd_bias_starttime mfd: dt: Add bindings for DA9063 OnKey mfd: da9063: Add support for OnKey driver mfd: arizona: Fix incorrect Makefile conditionals mfd: arizona: Add stub for wm5102_patch() mfd: Check ACPI device companion before checking resources Documentation: Add WM8998/WM1814 device tree bindings mfd: arizona: Split INx_MODE into two fields mfd: wm5110: Add delay before releasing reset line mfd: arizona: Add better support for system suspend ...
2015-06-23Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq departement delivers: - plug a potential race related to chained interrupt handlers - core updates which address the needs of the x86 irqdomain conversion - new irqchip callback to support affinity settings for VCPUs - the usual pile of updates to interrupt chip drivers - a few helper functions to allow further cleanups and simplifications I have a largish pile of coccinelle scripted/verified cleanups and simplifications pending on top of that, but I prefer to send that towards the end of the merge window when the arch/driver changes have hit your tree to avoid API change wreckage as far as possible" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) genirq: Remove bogus restriction in irq_move_mask_irq() irqchip: atmel-aic5: Add sama5d2 support irq: spear-shirq: Fix race in installing chained IRQ handler irq: irq-keystone: Fix race in installing chained IRQ handler gpio: gpio-tegra: Fix race in installing chained IRQ handler gpio: gpio-mxs: Fix race in installing chained IRQ handler gpio: gpio-mxc: Fix race in installing chained IRQ handler ARM: gemini: Fix race in installing GPIO chained IRQ handler GPU: ipu: Fix race in installing IPU chained IRQ handler ARM: sa1100: convert SA11x0 related code to use new chained handler helper irq: Add irq_set_chained_handler_and_data() irqchip: exynos-combiner: Save IRQ enable set on suspend genirq: Introduce helper function irq_data_get_affinity_mask() genirq: Introduce helper function irq_data_get_node() genirq: Introduce struct irq_common_data to host shared irq data genirq: Prevent crash in irq_move_irq() genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain irqchip: gic: Simplify gic_configure_irq by using IRQCHIP_SET_TYPE_MASKED irqchip: renesas: intc-irqpin: Improve binding documentation genirq: Set IRQCHIP_SKIP_SET_WAKE for no_irq_chip ...
2015-06-22mfd: lpc_ich: Assign subdevice ids automaticallyMika Westerberg1-4/+4
Using -1 as platform device id means that the platform driver core will not assign any id to the device (the device name will not have id at all). This results problems on systems that have multiple PCHs (Platform Controller HUBs) because all of them also include their own copy of LPC device. All the subsequent device creations will fail because there already exists platform device with the same name. Fix this by passing PLATFORM_DEVID_AUTO as platform device id. This makes the platform device core to allocate new ids automatically. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: si476x-i2c: Pass the IRQF_ONESHOT flagFabio Estevam1-1/+2
Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: ab8500-gpadc: Pass the IRQF_ONESHOT flagFabio Estevam1-2/+4
Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: ab8500-debugfs: Pass the IRQF_ONESHOT flagFabio Estevam1-1/+1
Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: wm8350-core: Pass the IRQF_ONESHOT flagFabio Estevam1-1/+2
Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: htc-i2cpld: Pass the IRQF_ONESHOT flagFabio Estevam1-1/+2
Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: wm831x-auxadc: Pass the IRQF_ONESHOT flagFabio Estevam1-1/+2
Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: mc13xxx-core: Pass the IRQF_ONESHOT flagFabio Estevam1-1/+1
Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: twl4030-irq: Pass the IRQF_ONESHOT flagFabio Estevam1-1/+1
Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: mt6397-core: Add GPIO sub-module supportHongzhou Yang1-0/+3
Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: da9063: Add support for OnKey driverSteve Twiss1-0/+54
Add MFD support for the DA9063 OnKey driver The function da9063_clear_fault_log() is added to mitigate the case of a hardware power-cut after a long-long OnKey press. Although there is no software intervention in this case (by definition) such a shutdown would cause persistent information within the DA9063 FAULT_LOG that would be available during the next device restart. Clearance of this persistent register must be completed after such a hardware power-cut operation has happened so that the FAULT_LOG does not continue with previous values. The clearance function has been added here in the kernel driver because wiping the fault-log cannot be counted on outside the Linux kernel. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> [Lee: Removed 'key_power' for Dmitry to take through the Input Tree] Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: arizona: Fix incorrect Makefile conditionalsRichard Fitzgerald1-3/+3
The use of ifneq against 'n' to conditionally compile codec-specific parts is wrong and was resulting in all the codec tables being built even for deselected codecs. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: Check ACPI device companion before checking resourcesLorenzo Pieralisi1-3/+5
Current code in mfd-core calls into ACPI to check resources even on a system that booted with a DT (on kernels with both DT and ACPI support compiled in). This triggers ACPI exceptions since we may end up calling the ACPI interpreter when it has not been initialized: "ACPI Exception: AE_BAD_PARAMETER, Thread 2064154624 could not acquire Mutex [0x1] (20150410/utmutex-285)" This patch fixes the issues by adding a check for an ACPI companion device before carrying out ACPI resources checks to avoid calling the ACPI interpreter if the fwnode representing the device is an OF one. Cc: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: arizona: Split INx_MODE into two fieldsRichard Fitzgerald1-2/+6
Later arizona silicon has the single/differential selector in a different register, and IN1_MODE only selects between analogue or digital. Prepare for this by splitting the INx_MODE definition into two fields. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: wm5110: Add delay before releasing reset lineCharles Keepax1-0/+10
On the wm5110 it is important the reset line is held for slightly longer to ensure the device starts up well. This patch adds a 5mS delay for this. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: arizona: Add better support for system suspendCharles Keepax1-16/+77
Allow the chip to completely power off if we enter runtime suspend and there is no jack detection active. This is helpful for systems where system suspend might remove the supplies to the CODEC, without informing us. Note the powering off is done in runtime suspend rather than system suspend, because we need to hold reset until the first time DCVDD is powered anyway (which would be in runtime resume), and we might as well save the extra power. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: wm5110: Set DCVDD voltage to 1.175V before entering sleep modeCharles Keepax1-0/+52
The low power sleep mode on wm5110 requires that the LDO1 regulator be set to 1.175V prior to entering sleep, then returned to 1.2V after exiting sleep mode. This patch apply these regulator settings. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: wm5110: Add register patch required for low power sleepCharles Keepax1-0/+39
Some register settings must be applied before the first time low power sleep mode is entered on the wm5110 to ensure optimium performance. These settings require SYSCLK to be enabled whilst they are being applied. This patch applies the settings using the recently factored out boot time SYSCLK functionality. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: arizona: Factor out SYSCLK enable from wm5102 hardware patchCharles Keepax1-20/+57
wm5102 applies a custom hardware boot sequence, for this the SYSCLK needs to be enabled. This patch factors out the code that enables SYSCLK for this sequence such that it can be used for other boot time operations that require SYSCLK. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: arizona: Fix formating/style issues in arizona_apply_hardware_patchCharles Keepax1-20/+17
In preparation for some refactoring fixup some minor style, formating and code clarity issues. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: wm5102: Ensure we always boot the device fullyCharles Keepax1-10/+40
The wm5102 uses a custom boot sequence and the standard boot sequence is disabled. However, the standard boot sequence must be run at least once after a cold boot (caused by either a hard reset or removal of AVDD). Unfortunately the register WRITE_SEQUENCER_CTRL_3 is not affected by the hardware reset. This means if the device has been previously booted but the AVDD supply has never been removed, arizona_dev_init will reset the chip but the boot sequence will not run, which can cause numerous problems. The solution is to manually clear this register and then boot the chip again, which is what this patch does. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: arizona: Factor out hard reset into helper functionsCharles Keepax1-8/+17
This patch adds functions for enabling and disabling the physical reset line. This will be helpful in future refactoring. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: arizona: Use devres to manage reset GPIOCharles Keepax1-6/+4
This also handily fixes a leak of the GPIO in arizona_dev_exit. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven1-2/+4
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: twl4030-power: Fix pmic for boards that need AC charger disabledTony Lindgren1-7/+38
I noticed the PMIC configuration on 37xx-evm won't actually shut down the voltages during off-idle. Turns out 37xx-evm needs the AC charger state transitions disabled like we are doing for SDP and LDP in the legacy booting case. Let's fix this for device tree based booting by setting up the quirk flag based on the compatible flag. And let's also use the existing define for STARTON_CHG. Note that SDP and EVM do not have the PMIC clken wired to gate the the oscillator while LDP has. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: arizona: Remove redundant register syncCharles Keepax1-8/+0
This soft reset used to be located after the register patch had been applied, but has since moved to before the patch is applied. At the new location there is no requirement to do a register sync as no register writes will have happened yet. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22mfd: Constify regmap and irq configuration dataKrzysztof Kozlowski21-28/+28
Constify in various drivers configuration data which is not modified: - regmap_irq_chip, - individual regmap_irq's in array, - regmap_config, - irq_domain_ops, Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22Merge branches 'ib-mfd-watchdog-rtc-4.2', 'ib-mfd-regulator-4.2' and ↵Lee Jones5-172/+685
'ib-mfd-i2c-input-chrome-4.2' into ibs-for-mfd-merged
2015-06-22mfd: cros_ec: Staticise some newly introduced structuresLee Jones1-4/+4
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-18ARM: sa1100: convert SA11x0 related code to use new chained handler helperRussell King1-2/+1
Convert SA11x0 (Neponset, SA1111, and UCB1x00 code) to use the new irq_set_chained_handler_and_data() helper. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Lee Jones <lee.jones@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/E1Z4yzx-0002S6-7p@rmk-PC.arm.linux.org.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-15mfd: cros_ec: spi: Add delay for asserting CSAlexandru M Stan1-2/+19
Some ECs need a little time for waking up before they can accept SPI data at a high speed. This is configurable via a DT property "google,cros-ec-spi-pre-delay". This patch makes the cros_ec_spi driver to cause a delay before the beginning of a SPI transaction, to make sure that the EC has already woken up, if the property has been defined in the DTS. Signed-off-by: Alexandru M Stan <amstan@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15mfd: cros_ec: Support multiple EC in a systemGwendal Grignou3-10/+46
Chromebooks can have more than one Embedded Controller so the cros_ec device id has to be incremented for each EC registered. Add a new structure to represent multiple EC as different char devices (e.g: /dev/cros_ec, /dev/cros_pd). It connects to cros_ec_device and allows sysfs inferface for cros_pd. Also reduce number of allocated objects, make chromeos sysfs class object a static and add refcounting to prevent object deletion while command is in progress. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15mfd: cros_ec: add bus-specific proto v3 codeStephen Barber2-57/+491
Add proto v3 support to the SPI, I2C, and LPC. Signed-off-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15mfd: cros_ec: add proto v3 skeletonStephen Barber3-12/+22
Add support in cros_ec.c to handle EC host command protocol v3. For v3+, probe for maximum shared protocol version and max request, response, and passthrough sizes. For now, this will always fall back to v2, since there is no bus-specific code for handling proto v3 packets. Signed-off-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15mfd: cros_ec: Move protocol helpers out of the MFD driverJavier Martinez Canillas2-98/+4
The MFD driver should only have the logic to instantiate its child devices and setup any shared resources that will be used by the subdevices drivers. The cros_ec MFD is more complex than expected since it also has helpers to communicate with the EC. So the driver will only get more bigger as other protocols are supported in the future. So move the communication protocol helpers to its own driver as drivers/platform/chrome/cros_ec_proto.c. Suggested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15mfd: cros_ec: Use a zero-length array for command dataJavier Martinez Canillas3-11/+23
Commit 1b84f2a4cd4a ("mfd: cros_ec: Use fixed size arrays to transfer data with the EC") modified the struct cros_ec_command fields to not use pointers for the input and output buffers and use fixed length arrays instead. This change was made because the cros_ec ioctl API uses that struct cros_ec_command to allow user-space to send commands to the EC and to get data from the EC. So using pointers made the API not 64-bit safe. Unfortunately this approach was not flexible enough for all the use-cases since there may be a need to send larger commands on newer versions of the EC command protocol. So to avoid to choose a constant length that it may be too big for most commands and thus wasting memory and CPU cycles on copy from and to user-space or having a size that is too small for some big commands, use a zero-length array that is both 64-bit safe and flexible. The same buffer is used for both output and input data so the maximum of these values should be used to allocate it. Suggested-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15mfd: cros_ec: Instantiate sub-devices from device treeTodd Broch1-11/+11
If the EC device tree node has sub-nodes, try to instantiate them as MFD sub-devices. We can configure the EC features provided by the board. Signed-off-by: Todd Broch <tbroch@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15mfd: cros_ec: Remove parent fieldGwendal Grignou2-2/+0
Parent and device were pointing to the same device structure. Parent is unused, removed. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Stephen Barber <smbarber@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Puthikorn Voravootivat <puthik@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+4
Conflicts: drivers/net/phy/amd-xgbe-phy.c drivers/net/wireless/iwlwifi/Kconfig include/net/mac80211.h iwlwifi/Kconfig and mac80211.h were both trivial overlapping changes. The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and the bug fix that happened on the 'net' side is already integrated into the rest of the amd-xgbe driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-27mfd: da9052: Fix broken regulator probeJohan Hovold1-4/+4
Fix broken probe of da9052 regulators, which since commit b3f6c73db732 ("mfd: da9052-core: Fix platform-device id collision") use a non-deterministic platform-device id to retrieve static regulator information. Fortunately, adequate error handling was in place so probe would simply fail with an error message. Update the mfd-cell ids to be zero-based and use those to identify the cells when probing the regulator devices. Fixes: b3f6c73db732 ("mfd: da9052-core: Fix platform-device id collision") Cc: stable <stable@vger.kernel.org> # v3.19 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-05-13mfd: axp20x: Enable AXP22X regulatorsChen-Yu Tsai1-0/+2
Now that the axp20x-regulators driver supports different variants of the AXP family, we can enable regulator support for AXP22X without the risk of incorrectly configuring regulators. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-05-13mfd: axp20x: Add AXP22x PMIC supportBoris BREZILLON1-0/+98
Add support for the AXP22x PMIC devices to the existing AXP20x driver. This includes the AXP221 and AXP223, which are identical except for the external data bus. Only AXP221 is added for now. AXP223 will be added after it's Reduced Serial Bus (RSB) interface is supported. AXP22x defines a new set of registers, power supplies and regulators, but most of the API is similar to the AXP20x ones. A new irq chip definition is used, even though the available interrupts on AXP22x is a subset of those on AXP20x. This is done so the interrupt numbers match those on the datasheet. This patch only enables the interrupts, system power-off function, and PEK sub-device. The regulator driver must first support different variants before we enable it from the mfd driver. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> [wens@csie.org: fix interrupts and move regulators to separate patch] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-05-06can: janz-ican3: add support for CAL/CANopen firmwareAndreas Gröger1-0/+4
In our department we are using some older Janz ICAN3-modules in our dekstop pcs. There we have slightly different carrier boards than the janz-cmodio supported in the kernel sources, called CAN-PCI2 with two submodules. But the pci configuration regions are identical. So extending the supported pci devices to the corresponding device ids is sufficient to get the drivers working. * The old ICAN3-modules with firmware 1.28 need more then 250ms for the restart after reset. I've increased the timeout to 500ms. * The janz_ican3 module uses the raw can services of the Janz-firmware, this means firmware must be ICANOS/2. Our ICAN3-modules are equipped with CAL/CANopen-firmware, so I must use the appropriate commands for the layer management services. Te driver detects the firmware after module reset and selects the commands matching the firmware. This affects the bus on/off-command (ican3_set_bus_state) and the configuration of the bittiming (ican3_set_bittiming). For better diagnostics the detected firmware string is presented as sysfs attribute (fwinfo). Signed-off-by: Andreas Gröger <andreas24groeger@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>