summaryrefslogtreecommitdiff
path: root/drivers/misc/apds9802als.c
AgeCommit message (Collapse)AuthorFilesLines
2023-05-29misc: Switch i2c drivers back to use .probe()Uwe Kleine-König1-1/+1
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. While touching these drivers, fix alignment in apds990x.c and bh1770glc.c. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Link: https://lore.kernel.org/r/20230517220135.170379-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-23misc: apds9802als: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-484-uwe@kleine-koenig.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König1-2/+1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 167Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 83 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.021731668@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28misc: apds9802als: constify i2c_device_idArvind Yadav1-1/+1
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28misc: apds9802als: constify attribute_group structures.Arvind Yadav1-1/+1
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-08drivers/misc: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06misc: replace strict_strtoul() with kstrtoul()Jingoo Han1-2/+3
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11misc: apds9802als: Fix suspend/resumeLars-Peter Clausen1-21/+4
The apds9802als driver implements runtime pm and at the same time uses the legacy pm callbacks for suspend and resume. This does not work since the i2c core wont look at the legacy pm callbacks if a driver has the 'pm' field set. This patch fixes it by moving over to dev_pm_ops for suspend/resume as well. Since both runtime pm and suspend/resume behave the same way this can easily be done using the UNIVERSAL_DEV_PM_OPS macro. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Hong Liu <hong.liu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22misc: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22drivers/misc: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16misc: apds9802als: Fix the logic checking timeout in als_wait_for_data_ready()Axel Lin1-1/+1
In the case of timeout waiting for data ready, the retry variable is -1. This also fixes a bug: current code returns -ETIMEDOUT if latest retry success ( which means retry is 0 when exiting the while loop ). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-25MISC: convert drivers/misc/* to use module_i2c_driver()Axel Lin1-11/+1
This patch converts the drivers in drivers/misc/* to use the module_i2c_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Michael Hennerich <hennerich@blackfin.uclinux.org> Cc: Anantha Narayanan <Anantha.Narayanan@intel.com> Cc: Hemanth V <hemanthv@ti.com> Cc: Christoph Mair <christoph.mair@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Ben Gardner <bgardner@wabtec.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Kalhan Trisal <kalhan.trisal@intel.com> Cc: Darrick J. Wong <djwong@us.ibm.com> Cc: Daniel Mack <zonque@gmail.com> Cc: Rodolfo Giometti <giometti@linux.it> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23drivers/misc/apds9802als.c: put the device into runtime suspend after ↵Hong Liu1-7/+10
resume()/probe() is handled Put the device into runtime suspend after resume()/probe() is handled by the PM core and the device core code. No need to manually add them in each single driver. And correct the runtime state in remove(). Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16i2c: Remove obsolete cleanup for clientdataWolfram Sang1-1/+0
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit. This is obsolete meanwhile, so fix it and hope the word will spread. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Alan Cox <alan@linux.intel.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-11-12drivers/misc/apds9802als.c: fix signedness bugVasiliy Kulikov1-1/+1
i2c_smbus_read_byte_data() may return negative error code. This is not seen to als_sensing_range_store() as the result is stored in unsigned int. Made it signed. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Cc: Hong Liu <hong.liu@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Anantha Narayanan <anantha.narayanan@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27drivers/misc/apds9802als.c: add runtime PM supportHong Liu1-64/+103
Update the driver for the needed runtime power features. Remove the old user controlled power functions. [akpm@linux-foundation.org: put PM code under CONFIG_PM] Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27drivers/misc/apds9802als.c: ALS drivers for the apds9802alsanantha1-0/+308
This adds support for the ADPS9802ALS sensor. Cleanup by Alan Cox - move mutexes to cover more things - report I/O errors back to user space - report range and values in LUX Signed-off-by: Anantha Narayanan <anantha.narayanan@intel.com> [The 4K and 64K in the hw spec actually means 4095 (12bit) and 65535 (16bit).] Signed-off-by: Hong Liu <hong.liu@intel.com> [Updated to match the ALS light API interface convention from Samu] Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>