summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/mxcmmc.c
AgeCommit message (Collapse)AuthorFilesLines
2024-02-13mmc: mxcmmc: Use sg_miter for PIOLinus Walleij1-20/+33
Use the scatterlist memory iterator instead of just dereferencing virtual memory using sg_virt(). This make highmem references work properly. Since this driver is using a worker, no atomic trickery is needed. Suggested-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/linux-mmc/20240122073423.GA25859@lst.de/ Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240127-mmc-proper-kmap-v2-6-d8e732aa97d1@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-08-15mmc: mxcmmc: Convert to platform remove callback returning voidYangtao Li1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230727070051.17778-51-frank.li@vivo.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-08-09mmc: Explicitly include correct DT includesRob Herring1-1/+0
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20230718143054.1065288-1-robh@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-08-09mmc: mxcmmc: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-2/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230704131939.22562-1-frank.li@vivo.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: mxcmmc: fix return value check of mmc_add_host()Yang Yingliang1-1/+3
mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and goto error path which will call mmc_free_host(). Fixes: d96be879ff46 ("mmc: Add a MX2/MX3 specific SDHC driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221101063023.1664968-4-yangyingliang@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-13mmc: mxcmmc: Use mmc_card_sdio macroSeunghui Lee1-1/+1
Use mmc_card_sdio macro to simplify code. Signed-off-by: Seunghui Lee <sh043.lee@samsung.com> Link: https://lore.kernel.org/r/20220713033635.28432-3-sh043.lee@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: mxcmmc: Silence a clang warningFabio Estevam1-1/+1
Change the of_device_get_match_data() cast to (uintptr_t) to silence the following clang warning: drivers/mmc/host/mxcmmc.c:1028:18: warning: cast to smaller integer type 'enum mxcmci_type' from 'const void *' [-Wvoid-pointer-to-enum-cast] Reported-by: kernel test robot <lkp@intel.com> Fixes: 8223e885e74b ("mmc: mxc: Convert the driver to DT-only") Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20220526010022.1163483-1-festevam@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-19dmaengine: imx: Move header to include/dma/Sascha Hauer1-1/+1
The i.MX DMA drivers are device tree only, nothing in include/linux/platform_data/dma-imx.h has platform_data in it, so move the file to include/linux/dma/imx-dma.h. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-By: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220414162249.3934543-10-s.hauer@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-12PM: core: Remove static qualifier in DEFINE_SIMPLE_DEV_PM_OPS macroPaul Cercueil1-1/+1
Keep this macro in line with the other ones. This makes it possible to use them in the cases where the underlying dev_pm_ops structure is exported. Restore the "static" qualifier in the two drivers where the DEFINE_SIMPLE_DEV_PM_OPS macro was used. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-17mmc: mxc: Use the new PM macrosPaul Cercueil1-4/+2
Use DEFINE_SIMPLE_DEV_PM_OPS() instead of the SIMPLE_DEV_PM_OPS() macro, along with using pm_sleep_ptr() as this driver doesn't handle runtime PM. This makes it possible to remove the #ifdef CONFIG_PM guard around the suspend/resume functions. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-11-24mmc: mxc: Convert the driver to DT-onlyFabio Estevam1-29/+4
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code by removing the unused non-DT support. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20201123203004.18792-1-festevam@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4Douglas Anderson1-0/+1
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to be around in the v4.4 timeframe. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # SH_MMCIF Tested-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200903162412.1.Id501e96fa63224f77bb86b2135a5e8324ffb9c43@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-19mmc: mxcmmc: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi1-1/+10
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191217112803.31161-1-peter.ujfalusi@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-09-11mmc: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-3/+1
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-mmc@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-5/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-21mmc: mxcmmc: "Revert mmc: mxcmmc: handle highmem pages"Alexander Shiyan1-12/+4
This reverts commit b189e7589f6d3411e85c6b7ae6eef158f08f388f. Unable to handle kernel paging request at virtual address c8358000 pgd = efa405c3 [c8358000] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT ARM CPU: 0 PID: 711 Comm: kworker/0:2 Not tainted 4.20.0+ #30 Hardware name: Freescale i.MX27 (Device Tree Support) Workqueue: events mxcmci_datawork PC is at mxcmci_datawork+0xbc/0x2ac LR is at mxcmci_datawork+0xac/0x2ac pc : [<c04e33c8>] lr : [<c04e33b8>] psr: 60000013 sp : c6c93f08 ip : 24004180 fp : 00000008 r10: c8358000 r9 : c78b3e24 r8 : c6c92000 r7 : 00000000 r6 : c7bb8680 r5 : c7bb86d4 r4 : c78b3de0 r3 : 00002502 r2 : c090b2e0 r1 : 00000880 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: a68a8000 DAC: 00000055 Process kworker/0:2 (pid: 711, stack limit = 0x389543bc) Stack: (0xc6c93f08 to 0xc6c94000) 3f00: c7bb86d4 00000000 00000000 c6cbfde0 c7bb86d4 c7ee4200 3f20: 00000000 c0907ea8 00000000 c7bb86d8 c0907ea8 c012077c c6cbfde0 c7bb86d4 3f40: c6cbfde0 c6c92000 c6cbfdf4 c09280ba c0907ea8 c090b2e0 c0907ebc c0120c18 3f60: c6cbfde0 00000000 00000000 c6cbb580 c7ba7c40 c7837edc c6cbb598 00000000 3f80: c6cbfde0 c01208f8 00000000 c01254fc c7ba7c40 c0125400 00000000 00000000 3fa0: 00000000 00000000 00000000 c01010d0 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c04e33c8>] (mxcmci_datawork) from [<c012077c>] (process_one_work+0x1f0/0x338) [<c012077c>] (process_one_work) from [<c0120c18>] (worker_thread+0x320/0x474) [<c0120c18>] (worker_thread) from [<c01254fc>] (kthread+0xfc/0x118) [<c01254fc>] (kthread) from [<c01010d0>] (ret_from_fork+0x14/0x24) Exception stack(0xc6c93fb0 to 0xc6c93ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e3500000 1a000059 e5153050 e5933038 (e48a3004) ---[ end trace 54ca629b75f0e737 ]--- note: kworker/0:2[711] exited with preempt_count 1 Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Fixes: b189e7589f6d ("mmc: mxcmmc: handle highmem pages") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: mxcmmc: Drop unused includesLinus Walleij1-2/+0
The MXCMMC driver uses slot GPIO helpers and does not make any use of <linux/gpio.h> or <linux/of_gpio.h> so drop these surplus includes. Cc: Jun Qian <hangdianqj@163.com> Cc: Matteo Facchinetti <matteo.facchinetti@sirius-es.it> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-08mmc: mxcmmc: replace spin_lock_irqsave with spin_lock in ISRjun qian1-3/+2
As you are already in ISR, it is unnecessary to call spin_lock_irqsave. Signed-off-by: jun qian <hangdianqj@163.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-07-16mmc: mxcmmc: Fix missing parentheses and braceKees Cook1-1/+2
Looks like the adjusted syntax wasn't fully build tested. This fixes failures with powerpc builds: drivers/mmc/host/mxcmmc.c: In function ‘mxcmci_swap_buffers’: drivers/mmc/host/mxcmmc.c:296:51: error: expected ‘)’ before ‘;’ token void *buf = kmap_atomic(sg_page(sg) + sg->offset; ^ drivers/mmc/host/mxcmmc.c:299:1: error: expected ‘,’ or ‘;’ before ‘}’ token } ^ Fixes: b189e7589f6d3 ("mmc: mxcmmc: handle highmem pages") Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-30mmc: mxmmc: Use ifdef rather than __maybe_unusedUlf Hansson1-2/+4
To be consistent with code in other mmc host drivers, convert to check the correct PM config #ifdef in favor of using __maybe_unused. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-29mmc: mxmmc: include linux/highmem.hArnd Bergmann1-0/+1
The highmem conversion caused a build error in some configurations: drivers/mmc/host/mxcmmc.c: In function 'mxcmci_transfer_data': drivers/mmc/host/mxcmmc.c:622:10: error: implicit declaration of function 'kmap_atomic'; did you mean 'in_atomic'? [-Werror=implicit-function-declaration] This includes the correct header file. Fixes: b189e7589f6d ("mmc: mxcmmc: handle highmem pages") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-21mmc: mxcmmc: handle highmem pagesChristoph Hellwig1-4/+11
Use kmap_atomic to map the scatterlist entry before using it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02mmc: Convert timers to use timer_setup()Kees Cook1-4/+3
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: Allen <allen.lkml@gmail.com> Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: mxcmmc: catch all errors when getting regulatorsWolfram Sang1-1/+1
Bail out everytime when mmc_regulator_get_supply() returns an errno, not only when probing gets deferred. This is currently a no-op, because this function only returns -EPROBE_DEFER or 0 right now. But if it will throw another error somewhen, it will be for a reason. (This still doesn't change that getting regulators is optional, so 0 can still mean no regulators found). So, let us a) be future proof and b) have driver code which is easier to understand. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc-host: mxcmmc: use setup_timer() helper.Allen1-3/+1
Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by: Allen Pais <allen.lkml@gmail.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: mxcmmc: Handle return value of clk_prepare_enableArvind Yadav1-6/+19
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: mxcmmc: check the return value of mxcmci_finish_dataShawn Lin1-0/+3
We got a compile warning for mxcmmc, drivers/mmc/host/mxcmmc.c: In function 'mxcmci_data_done': drivers/mmc/host/mxcmmc.c:661:6: warning: variable 'data_error' set but not used [-Wunused-but-set-variable] The easiest method is to remove the data_error. But looking into the code closely, I think we should check the return value of mxcmci_finish_data as if it got data->error(the same as data_error), we shouldn't try to read the response. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: mxcmmc: fix error return code in mxcmci_probe()Gustavo A. R. Silva1-2/+4
platform_get_irq() returns an error code, but the mxcmmc driver ignores it and always returns -EINVAL. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. Print error message and propagate the return value of platform_get_irq on failure. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-25mmc: host: use the defined function to check whether card is removableJaehoon Chung1-1/+1
In linux/mmc/host.h, mmc_card_is_removable() is already defined. It should be maintainted more easier than now. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29mmc: mxcmmc: remove the MMC_DATA_STREAM flagJaehoon Chung1-3/+0
Remove the MMC_DATA_STREAM flag because it isn't used anymore. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: host: mxcmmc: Simplify a trivial if-return sequenceFabio Estevam1-5/+1
Simplify a trivial if-return sequence. Possibly combine with a preceding function call. The semantic patch that makes this change is available in scripts/coccinelle/misc/simple_return.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-03-24powerpc: Remove arch specific byteswappers from the MXC MMC driverDavid Gibson1-1/+1
When the MXC MMUC driver is used on a Freescale MPC512x machine, it contains some additional byteswapping code (I'm assuming this is a workaround for a hardware defect). This uses the ppc specific st_le32() function, but there's no reason not to use the generic swab32() function instead. gcc is capable of generating the efficient ppc byte-reversing load/store instructions without the arch-specific helper. This patch, therefore, switches to the generic byteswap routine. Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-11-10mmc: mxcmmc: fix the default value for available voltages into mxcmci_probeMatteo Facchinetti1-5/+7
If available voltages are not given, mmc_regulator_get_supply() function returns 0 and mxcmmc driver doesn't set a value for ocr_avail mask. In accordance with the comment in platform_data/mmc-mxcmmc.h, fix it, assuming MMC_VDD_32_33 | MMC_VDD_33_34 as default value. Signed-off-by: Matteo Facchinetti <matteo.facchinetti@sirius-es.it> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10mmc: mxcmmc: fix race condition when dma finish a data transferMatteo Facchinetti1-10/+3
During a read of data block using dma, driver might have two ways to finish to read and free the resources: 1) checking STATUS_DATA_TRANS_DONE mask, in the mxcmci_irq() routine (pending to mmc irq) 2) mxmmc driver, registers also a mxcmci_dma_callback() and when transfer is finished, dma driver calls this callback. (pending to dma irq) Both ways are concurrent with each other. Race condition happens when following events occur: /* (1) mxcmci driver start data transfer */ 158.418970: mpc_dma_execute: mpc_dma_execute(): will_access_peripheral start cid=31 158.418976: mpc_dma_issue_pending <-mxcmci_request 158.418983: mxcmci_start_cmd <-mxcmci_request /* (2) mxcmci driver receive mmc irq */ 158.419656: mxcmci_irq <-handle_irq_event_percpu 158.419692: mxcmci_read_response <-mxcmci_irq /* (3) mxcmci driver checks that transfer is complete and call mxcmci_finish_data() */ 158.419726: mxcmci_data_done <-mxcmci_irq 158.419729: mxcmci_finish_data <-mxcmci_data_done 158.419733: dma_direct_unmap_sg <-mxcmci_finish_data 158.419736: mxcmci_swap_buffers.isra.24 <-mxcmci_finish_data 158.419762: mxcmci_read_response <-mxcmci_data_done /* (4) mxcmci driver (no dma): send stop command */ 158.419765: mxcmci_start_cmd <-mxcmci_data_done /* (5) mxcmci driver (no dma): receive the stop command irq response */ 158.419782: mxcmci_irq <-handle_irq_event_percpu 158.419812: mxcmci_read_response <-mxcmci_irq 158.419843: mxcmci_finish_request <-mxcmci_irq /* (6) dma driver: receive dma irq (finish data transfer) related by request on step 1 */ 158.419853: mpc_dma_irq <-handle_irq_event_percpu 158.420001: mpc_dma_irq_process <-mpc_dma_irq 158.420004: mpc_dma_irq_process <-mpc_dma_irq /* (7) dma driver: start dma tasklet to finish the dma irq handling */ 158.420008: mpc_dma_irq_process: mpc_dma_irq_process(): completed ch:31 /* (8) mxcmci driver: start next data transfer using dma */ 158.420174: mxcmci_request <-mmc_start_req 158.420182: dma_direct_map_sg <-mxcmci_request 158.420192: mpc_dma_prep_slave_sg <-mxcmci_request /* (9) dma driver: schedule irq tasklet and execute mxcmci dma driver callback */ 158.420250: mpc_dma_tasklet <-tasklet_action 158.420254: mpc_dma_process_completed <-tasklet_action 158.420267: mxcmci_dma_callback <-mpc_dma_process_completed /* ERROR!!! (10) mxcmci driver callback works on dma data related to the step 1 that is already finished */ 158.420271: mxcmci_data_done <-mpc_dma_process_completed 158.420273: mxcmci_finish_data <-mxcmci_data_done /* ERROR!!! (11) mxcmci driver: clear data that should be used by step 8 and send an other mmc stop command (already sended on step 4) */ 158.420276: dma_direct_unmap_sg <-mxcmci_finish_data 158.420279: mxcmci_swap_buffers.isra.24 <-mxcmci_finish_data 158.420330: mxcmci_read_response <-mxcmci_data_done 158.420333: mxcmci_start_cmd <-mxcmci_data_done 158.420338: dma_run_dependencies <-mpc_dma_process_completed ... ... ... 168.474223: mxcmci_watchdog <-call_timer_fn 168.474236: mxcmci_watchdog: mxcmci_watchdog 168.474397: mpc_dma_device_control <-mxcmci_watchdog In accordance with the other drivers that using the dma engine, fix it, leaving *only* to dma driver the complete control to ending the read operation. Removing STATUS_READ_OP_DONE event activation, has as effect to force mxcmci driver to handle the finish data transfer only by mxcmci dma callback. Signed-off-by: Matteo Facchinetti <matteo.facchinetti@sirius-es.it> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: remove .owner field for drivers using module_platform_driverPeter Griffin1-1/+0
This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-13mmc: mxcmmc: Use mmc_regulator_get_supply() APIAlexander Shiyan1-27/+17
This patch replaces regulator manipulation with mmc_regulator_get_supply() function from MMC core. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-13mmc: mxcmmc: Convert to SIMPLE_DEV_PM_OPSAlexander Shiyan1-10/+3
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-13mmc: mxcmmc: Convert to devm-* APIAlexander Shiyan1-63/+38
Replace existing resource handling in the driver with managed device resource, this ensures more consistent error values and simplifies error paths. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2013-10-31mmc: mxcmmc: Move away from using deprecated APIsUlf Hansson1-10/+2
Suspend and resume of cards are being handled from the protocol layer and consequently the mmc_suspend|resume_host APIs are deprecated. This means we can simplify the suspend|resume callbacks by removing the use of the deprecated APIs. Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: mxcmmc: handle mmc_of_parse() errors during probeSimon Baatz1-1/+3
Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26mmc: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: enable DMA support on mpc512xAnatolij Gustschin1-2/+33
Add SDHC DMA channel description to the mpc512x device tree to enable slave channel requesting in the mxcmmc driver. mpc512x DMA engine doesn't support endianness conversion when reading/writing data from peripheral's FIFO, so we have to swap data buffers before each DMA write and after each DMA read transfer manually. Since chained SDHC DMA transfers are not supported on mpc512x, limit 'max_segs' tunable parameter to one and initialise it to 64 only when running on i.MX platforms. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: constify mxcmci_devtypeAnatolij Gustschin1-1/+1
mxcmci_devtype struct contains constant data, so constify this struct. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: use slot-gpio API for write-protect detectionAnatolij Gustschin1-3/+5
slot-gpio API suppors read-only detection when "wp-gpios" property is present in the device tree mmc node. Use this API for write-protect detection. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: add mpc512x SDHC supportAnatolij Gustschin1-44/+89
The SDHC controller on mpc512x is compatible with i.MX31 SDHC, so the mxcmmc driver can be used on mpc512x, too. Extend the driver to support mpc512x as well. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: fix race conditions for host->req and host->data accessAnatolij Gustschin1-7/+24
mxcmci_dma_callback() is invoked by DMA drivers in soft-irq context and can be interrupted by the mxcmci_irq() interrupt which can finish the mmc request or data transfer and set host->req or host->data pointers to NULL. Then mxcmci_data_done() crashes with a null pointer dereferences. Protect all accesses to host->req and host->data by spin locks. Also check host->data pointer in mxcmci_watchdog() before dereferencing it. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: DT supportMarkus Pargmann1-18/+61
Adding devicetree support for imx21-mmc and imx31-mmc. Based on generic gpio helper functions by Guennadi and generic DMA devicetree bindings. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: Fix bug when card is present during bootAlexander Shiyan1-2/+2
This patch fixes bug when card is present during boot. Bug was introduced due commit "mmc: mxcmmc: fix bug that may block a data transfer forever". When a card is present "mxcmci_setup_data" function is executed, but the timer is not initialized. ... i.MX SDHC driver mmc0: SD Status: Invalid Allocation Unit size. mmc0: new SD card at address b368 mmcblk0: mmc0:b368 SDC 1.91 GiB ------------[ cut here ]------------ kernel BUG at kernel/timer.c:729! Internal error: Oops - BUG: 0 [#1] PREEMPT ARM CPU: 0 Not tainted (3.9.0-rc5-next-20130404 #2) PC is at mod_timer+0x168/0x198 LR is at mxcmci_request+0x21c/0x328 ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-12-12Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-2/+29
Pull ARM SoC cleanups on various subarchitectures from Olof Johansson: "Cleanup patches for various ARM platforms and some of their associated drivers. There's also a branch in here that enables Freescale i.MX to be part of the multiplatform support -- the first "big" SoC that is moved over (more multiplatform work comes in a separate branch later during the merge window)." Conflicts fixed as per Olof, including a silent semantic one in arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to omap3xxx_restart(), and a new user of the old name was added). * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits) ARM: omap: fix typo on timer cleanup ARM: EXYNOS: Remove unused regs-mem.h file ARM: EXYNOS: Remove unused non-dt support for dwmci controller ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: SAMSUNG: use devm_ functions for ADC driver ARM: EXYNOS: no duplicate mask/unmask in eint0_15 ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443 ARM: EXYNOS: Remove i2c0 resource information and setting of device names ARM: Kirkwood: checkpatch cleanups ARM: Kirkwood: Fix sparse warnings. ARM: Kirkwood: Remove unused includes ARM: kirkwood: cleanup lsxl board includes ARM: integrator: use BUG_ON where possible ARM: integrator: push down SC dependencies ARM: integrator: delete static UART1 mapping ARM: integrator: delete SC mapping on the CP ARM: integrator: remove static CP syscon mapping ARM: integrator: remove static AP syscon mapping ...
2012-12-06mmc: mxcmmc: fix SD cards not being detected sometimes.Javier Martin1-1/+1
When a SD card is initialized some data transfers of 64 and 8 bytes are issued. It seems the DMA has some problems dealing with these kind of "short" transfers, leading sometimes to the SD card not being detected. In order to solve this problem, do not use DMA for transfer sizes lower than the sector size. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-09 11:13:13 +0300