summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/sdhci-xenon-phy.c
AgeCommit message (Collapse)AuthorFilesLines
2024-02-28mmc: sdhci-xenon: add timeout for PHY init completeElad Nachman1-9/+20
AC5X spec says PHY init complete bit must be polled until zero. We see cases in which timeout can take longer than the standard calculation on AC5X, which is expected following the spec comment above. According to the spec, we must wait as long as it takes for that bit to toggle on AC5X. Cap that with 100 delay loops so we won't get stuck forever. Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Elad Nachman <enachman@marvell.com> Link: https://lore.kernel.org/r/20240222191714.1216470-3-enachman@marvell.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-28mmc: sdhci-xenon: fix PHY init clock stabilityElad Nachman1-0/+19
Each time SD/mmc phy is initialized, at times, in some of the attempts, phy fails to completes its initialization which results into timeout error. Per the HW spec, it is a pre-requisite to ensure a stable SD clock before a phy initialization is attempted. Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Elad Nachman <enachman@marvell.com> Link: https://lore.kernel.org/r/20240222200930.1277665-1-enachman@marvell.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-11mmc: sdhci-xenon: switch to device_* APIMarcin Wojtas1-17/+19
In order to support both ACPI and DT, modify the driver to use device_* routines for obtaining the properties values. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20201204171626.10935-3-mw@semihalf.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-11mmc: sdhci-xenon: use match data for controllers variantsMarcin Wojtas1-1/+3
As a part of the ACPI support preparation resign from checking compatible strings in the driver. Instead of that use a new enum and assign the values to match data accordingly. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20201204171626.10935-2-mw@semihalf.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081036.435762997@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-25mmc: sdhci-xenon: Fixup already marked switch fall-throughGustavo A. R. Silva1-1/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases according to what the compiler looks for, where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: sdhci-xenon: Fix timeout checksAdrian Hunter1-3/+7
Always check the wait condition before returning timeout. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Zhoujie Wu <zjwu@marvell.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-08mmc: Convert to using %pOFn instead of device_node.nameRob Herring1-2/+2
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Hu Ziji <huziji@marvell.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-mmc@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-07-16mmc: sdhci-xenon: mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-05-28mmc: sdhci-xenon: use match_string() helperXie Yisheng1-8/+3
match_string() returns the index of an array for a matching string, which can be used intead of open coded variant. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Hu Ziji <huziji@marvell.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-mmc@vger.kernel.org Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci-xenon: Support HS400 Enhanced Strobe featureHu Ziji1-6/+28
Support HS400 Enhanced Strobe feature in Xenon. Enable Enhanced Strobe together with Data Strobe. Disable Enhanced Strobe when eMMC is not in HS400 mode. Signed-off-by: Hu Ziji <huziji@marvell.com> Signed-off-by: Zhoujie Wu <zjwu@marvell.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-05-19mmc: sdhci-xenon: kill xenon_clean_phy()Jisheng Zhang1-13/+1
Currently, the xenon_clean_phy() is only used for freeing phy_params. The phy_params is allocated by devm_kzalloc(), there's no need to free is explicitly. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Hu Ziji <huziji@marvell.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com>
2017-04-28mmc: sdhci-xenon: Fix default value of LOGIC_TIMING_ADJUST for eMMC5.0 PHYHu Ziji1-1/+6
The default value of LOGIC_TIMING_ADJUST register in eMMC 5.0 PHY is different from that in eMMC 5.1 PHY. Set the specific value for that register in eMMC 5.0 PHY. Signed-off-by: Hu Ziji <huziji@marvell.com> Reported-by: Jisheng Zhang <jszhang@marvell.com> Tested-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-25mmc: sdhci-xenon: Remove redundant dev_err call in get_dt_pad_ctrl_data()Wei Yongjun1-4/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: sdhci-xenon: Add SoC PHY PAD voltage controlHu Ziji1-1/+109
Some SoCs have PHY PAD outside Xenon IP. PHY PAD voltage should match signalling voltage in use. Add generic SoC PHY PAD voltage control interface. Implement Aramda-3700 SoC PHY PAD voltage control. Signed-off-by: Hu Ziji <huziji@marvell.com> Tested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHCHu Ziji1-0/+727
Marvell Xenon eMMC/SD/SDIO Host Controller contains PHY. Multiple types of PHYs are supported. Add support to multiple types of PHYs init and configuration. Add register definitions of PHYs. Xenon PHY cannot fit in kernel common PHY framework. Xenon SDHC PHY register is a part of Xenon SDHC register set. Besides, MMC initialization has to call several PHY functions to complete timing setting. Those PHY setting functions have to access SDHC registers and know current MMC setting, such as bus width, clock frequency and speed mode. As a result, implement Xenon PHY in MMC host directory. Signed-off-by: Hu Ziji <huziji@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-17 23:46:00 +0300