summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2013-05-08Merge branch 'for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "A couple of fixes + getting rid of __blkdev_put() return value" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: proc: Use PDE attribute setting accessor functions make blkdev_put() return void block_device_operations->release() should return void mtd_blktrans_ops->release() should return void hfs: SMP race on directory close()
2013-05-07Merge tag 'dt-for-linus-2' of ↵Linus Torvalds1-43/+5
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates (part 2) from Arnd Bergmann: "These are mostly new device tree bindings for existing drivers, as well as changes to the device tree source files to add support for those devices, and a couple of new boards, most notably Samsung's Exynos5 based Chromebook. The changes depend on earlier platform specific updates and touch the usual platforms: omap, exynos, tegra, mxs, mvebu and davinci." * tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: exynos: dts: cros5250: add EC device ARM: dts: Add sbs-battery for exynos5250-snow ARM: dts: Add i2c-arbitrator bus for exynos5250-snow ARM: dts: add mshc controller node for Exynos4x12 SoCs ARM: dts: Add chip-id controller node on Exynos4/5 SoC ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree ARM: davinci: da850-evm: add SPI flash support ARM: davinci: da850: override SPI DT node device name ARM: davinci: da850: add SPI1 DT node spi/davinci: add DT binding documentation spi/davinci: no wildcards in DT compatible property ARM: dts: mvebu: Convert mvebu device tree files to 64 bits ARM: dts: mvebu: introduce internal-regs node ARM: dts: mvebu: Convert all the mvebu files to use the range property ARM: dts: mvebu: move all peripherals inside soc ARM: dts: mvebu: fix cpus section indentation ARM: davinci: da850: add EHRPWM & ECAP DT node ARM/dts: OMAP3: fix pinctrl-single configuration ARM: dts: Add OMAP3430 SDP NOR flash memory binding ARM: dts: Add NOR flash bindings for OMAP2420 H4 ...
2013-05-07block_device_operations->release() should return voidAl Viro1-2/+1
The value passed is 0 in all but "it can never happen" cases (and those only in a couple of drivers) *and* it would've been lost on the way out anyway, even if something tried to pass something meaningful. Just don't bother. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-05Merge tag 'mmc-updates-for-3.10-rc1' of ↵Linus Torvalds38-513/+770
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC update from Chris Ball: "MMC highlights for 3.10: Core: - Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping mmc_power_up() at boot/initialization time if it's already happened, for performance (faster boot time) reasons. - Fix a bit width test failure that resulted in old eMMC cards being put into 1-bit mode when 4-bit mode was available. - Expose fwrev/hwrev for MMCv4 parts. - Improve card removal logic in the case where the card's removed slowly; we were missing card removal events if the card retained contact with the slot pads for long enough to reply to a CMD13 while being removed. Drivers: - davinci_mmc: Support using PIO instead of DMA. - dw_mmc: Add support for Exynos4412. - mxcmmc: DT support, use slot-gpio API. - mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property support. - sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs: SiRFprimaII: unicore ARM Cortex-A9 SiRFatlas6: unicore ARM Cortex-A9 SiRFmarco: dual core ARM Cortex-A9 SMP - sdhci-tegra: Add support for Tegra114 platforms, use mmc_of_parse()" * tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits) mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE mmc: core: fix init controller performance regression, updated patch mmc: mxcmmc: enable DMA support on mpc512x mmc: mxcmmc: constify mxcmci_devtype mmc: mxcmmc: use slot-gpio API for write-protect detection mmc: mxcmmc: add mpc512x SDHC support mmc: mxcmmc: fix race conditions for host->req and host->data access mmc: mxcmmc: DT support mmc: dw_mmc: let device core setup the default pin configuration mmc: mxs-mmc: add broken-cd property mmc: mxs-mmc: add non-removable property mmc: mxs-mmc: add cd-inverted property mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case mmc: mxcmmc: Fix bug when card is present during boot mmc: core: fix performance regression initializing MMC host controllers Revert "mmc: core: wait while adding MMC host to ensure root mounts successfully" mmc: atmel-mci: pio hang on block errors mmc: core: Fix bit width test failing on old eMMC cards mmc: dw_mmc: Use pr_info instead of printk mmc: dw_mmc: Check return value of regulator_enable ...
2013-05-02Merge tag 'multiplatform-for-linus' of ↵Linus Torvalds3-4/+89
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform updates from Olof Johansson: "More multiplatform enablement for ARM platforms. The ones converted in this branch are: - bcm2835 - cns3xxx - sirf - nomadik - msx - spear - tegra - ux500 We're getting close to having most of them converted! One of the larger platforms remaining is Samsung Exynos, and there are a bunch of supporting patches in this merge window for it. There was a patch in this branch to a early version of multiplatform conversion, but it ended up being reverted due to need of more bake time. The revert commit is part of the branch since it would have required rebasing multiple dependent branches and they were stable by then" * tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms clocksource: nomadik-mtu: fix up clocksource/timer Revert "ARM: exynos: enable multiplatform support" ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: exynos: enable multiplatform support rtc: s3c: make header file local mtd: onenand/samsung: make regs-onenand.h file local thermal/exynos: remove unnecessary header inclusions mmc: sdhci-s3c: remove platform dependencies ARM: samsung: move mfc device definition to s5p-dev-mfc.c ARM: exynos: move debug-macro.S to include/debug/ ARM: exynos: prepare for sparse IRQ ARM: exynos: introduce EXYNOS_ATAGS symbol ARM: tegra: build assembly files with -march=armv7-a ARM: Push selects for TWD/SCU into machine entries ARM: ux500: build hotplug.o for ARMv7-a ARM: ux500: move to multiplatform ARM: ux500: make remaining headers local ARM: ux500: make irqs.h local to platform ARM: ux500: get rid of <mach/[hardware|db8500-regs].h> ...
2013-05-02Merge tag 'soc-for-linus' of ↵Linus Torvalds1-5/+83
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "This branch contains part 1 of the platform updates for 3.10. Among the highlights: - Support for the new Atmel Cortex-A5 based platforms (SAMA5D3) - New support for CSR SiRFatlas6 SoCs - A handful of updates for NVidia T114 (a.k.a. Tegra 4) - A bunch of updates for the shmobile platforms - A handful of updates for davinci - A few updates for Qualcomm MSM - Plus a handful of other patches, defconfig updates, etc." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (135 commits) ARM: tegra: pm: fix build error w/o PM_SLEEP ARM: davinci: ensure global variables are declared ARM: davinci: sram.c: fix incorrect type in assignment ARM: davinci: da8xx dt: make file local symbols static ARM: davinci: da8xx: add remoteproc support ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries ARM: socfpga: Add clock entries into device tree ARM: socfpga: Enable soft reset ARM: EXYNOS: replace cpumask by the corresponding macro ARM: EXYNOS: handle properly the return values ARM: EXYNOS: factor out the idle states ARM: OMAP4: Enable fix for Cortex-A9 erratas ARM: OMAP2+: Export SoC information to userspace ARM: OMAP2+: SoC name and revision unification ARM: OMAP2+: Move common part of late init into common function ARM: tegra: pm: remove duplicated include from pm.c ARM: davinci: da850: override mmc DT node device name ARM: davinci: da850: add mmc DT entries mmc: davinci_mmc: add DT support ARM: SAMSUNG: check processor type before cache restoration in resume ...
2013-05-02Merge tag 'cleanup-for-linus' of ↵Linus Torvalds2-3/+81
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanup from Olof Johansson: "Here is a collection of cleanup patches. Among the pieces that stand out are: - The deletion of h720x platforms - Split of at91 non-dt platforms to their own Kconfig file to keep them separate - General cleanups and refactoring of i.MX and MXS platforms - Some restructuring of clock tables for OMAP - Convertion of PMC driver for Tegra to dt-only - Some renames of sunxi -> sun4i (Allwinner A10) - ... plus a bunch of other stuff that I haven't mentioned" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: sunxi: Rework the restart code irqchip: sunxi: Rename sunxi to sun4i irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro clocksource: sunxi: Rename sunxi to sun4i clocksource: sunxi: make use of CLKSRC_OF clocksource: sunxi: Cleanup the timer code ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ...
2013-05-02Merge tag 'fixes-nc-for-linus' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-critical fixes from Olof Johansson: "Here is a collection of fixes (and some intermixed cleanups) that were considered less important and thus not included in the later parts of the 3.9-rc cycle. It's a bit all over the map, contents wise. A series of ux500 fixes and cleanups, a bunch of various fixes for OMAP and tegra, and some for Freescale i.MX and even Qualcomm MSM. Note that there's also a patch on this branch to globally turn off -Wmaybe-uninitialized when building with -Os. It's been posted several times by Arnd and no dissent was raised, but nobody seemed interested to pick it up. So here it is, as the topmost patch." * tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) Turn off -Wmaybe-uninitialized when building with -Os ARM: orion5x: include linux/cpu.h ARM: tegra: call cpu_do_idle from C code ARM: u300: fix ages old copy/paste bug ARM: OMAP2+: add dependencies on ARCH_MULTI_V6/V7 ARM: tegra: solve adr range issue with THUMB2_KERNEL enabled ARM: tegra: fix relocation truncated error when THUMB2_KERNEL enabled ARM: tegra: fix build error when THUMB2_KERNEL enabled ARM: msm: Fix uncompess.h tx underrun check ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS" ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD" ARM: mach-imx: mach-imx6q: Fix sparse warnings ARM: mach-imx: src: Include "common.h ARM: mach-imx: gpc: Include "common.h" ARM: mach-imx: avic: Staticize *avic_base ARM: mach-imx: tzic: Staticize *tzic_base ARM: mach-imx: clk: Include "clk.h" ARM: mach-imx: clk-busy: Staticize clk_busy_mux_ops ...
2013-04-30mmc: sdhci-s3c: Fix operation on non-single image Samsung platformsMark Brown1-1/+1
Commit cc014f3 (mmc: sdhci-s3c: remove platform dependencies) changed the platform dependency in Kconfig to depend on SAMSUNG_SINGLE, meaning the driver was available only on single zImage Samsung platforms. This breaks platforms that haven't been converted such as S3C64xx. Revert that part of the change to fix. [arnd: CONFIG_SAMSUNG_SINGLE was actually introduced only for non-multiplatform configurations, but was subsequently removed, which means the driver was now broken both for single- and multi- platform. The dependency was there by accident anyway, so reverting this is still the correct solution] Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-30mmc: rename random32() to prandom_u32()Akinobu Mita1-2/+2
Use preferable function name which implies using a pseudo-random number generator. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29Merge tag 'tty-3.10-rc1' of ↵Linus Torvalds1-11/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver update from Greg Kroah-Hartman: "Here's the big tty/serial driver merge request for 3.10-rc1 Once again, Jiri has a number of TTY driver fixes and cleanups, and Peter Hurley came through with a bunch of ldisc fixes that resolve a number of reported issues. There are some other serial driver cleanups as well. All of these have been in the linux-next tree for a while" * tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (117 commits) tty/serial/sirf: fix MODULE_DEVICE_TABLE serial: mxs: drop superfluous {get|put}_device serial: mxs: fix buffer overflow ARM: PL011: add support for extended FIFO-size of PL011-r1p5 serial_core.c: add put_device() after device_find_child() tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safe serial: sccnxp: Replace pdata.init/exit with regulator API serial: sccnxp: Do not override device name TTY: pty, fix compilation warning TTY: rocket, fix compilation warning TTY: ircomm: fix DTR being raised on hang up TTY: synclinkmp: fix DTR being raised on hang up TTY: synclink_gt: fix DTR being raised on hang up TTY: synclink: fix DTR being raised on hang up serial: 8250_dw: Fix the stub for dw8250_probe_acpi() serial: 8250_dw: Convert to devm_ioremap() serial: 8250_dw: Set port capabilities based on CPR register serial: 8250_dw: Let ACPI code extract the DMA client info serial: 8250_dw: Support clk framework also with ACPI serial: 8250_dw: Enable runtime PM ...
2013-04-23mmc: sdhci-tegra: fix MODULE_DEVICE_TABLEArnd Bergmann1-1/+1
The symbol referenced in MODULE_DEVICE_TABLE must match the actual table, otherwise we get a build error like: sdhci-tegra.c:206:34: error: '__mod_of_device_table' aliased to undefined symbol 'sdhci_dt_ids' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-19Merge branch 'samsung/exynos-multiplatform' into next/multiplatformArnd Bergmann3-4/+90
These patches get us closer to adding multiplatform support on the Exynos platform, they are part of a longer series of patches. This would get all the simple stuff out of the way, and I don't think there is a big risk of introducing regressions with these. A lot of the other patches have already been merged into subsystem trees. After this series in in arm-soc, what is left comes down to * The ASoC conversion to dmaengine won't make it unless someone who knows that code better steps up to do it right away. This means that we won't have audio in a 3.10 multiplatform kernel on Exynos, but it will still work for users that don't enable multiplatform. * The irqchip (combiner), clk and clksource patches are all based on top of other changesets we pulled in from your trees, so I would not make them part of the next/multiplatform branch. We can apply them on top of the next/drivers branch once they are tested successfully. * A trivial patch is needed in the end to actually make CONFIG_ARCH_EXYNOS visible in multiplatform configurations. We will do that as a separate patch once everything else is there. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19mmc: sdhci-s3c: remove platform dependenciesArnd Bergmann3-4/+90
plat/regs-sdhci.h is not used anywhere but in the sdhci-s3c driver, so it can become a local file there and all other inclusions removed. plat/sdhci.h is used only to define the platform devices, and with the exception of the platform_data structure not needed by the driver, so we can split out the platform_data definition instead and leave the rest to platform code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chris Ball <cjb@laptop.org>
2013-04-18Merge tag 'davinci-for-v3.10/dt-2-v2' of ↵Olof Johansson1-5/+83
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt2 From Sekhar Nori: v3.10 DT updates for DaVinci This set of patches adds support for PWMs and SPI controller present on DA850 and for SPI flash present on DA850 EVM. * tag 'davinci-for-v3.10/dt-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: da850-evm: add SPI flash support ARM: davinci: da850: override SPI DT node device name ARM: davinci: da850: add SPI1 DT node spi/davinci: add DT binding documentation spi/davinci: no wildcards in DT compatible property ARM: davinci: da850: add EHRPWM & ECAP DT node ARM: davinci: da850: override mmc DT node device name ARM: davinci: da850: add mmc DT entries mmc: davinci_mmc: add DT support ARM: davinci: da850: add tps6507x regulator DT data ARM: regulator: add tps6507x device tree data ARM: davinci: remove test for undefined Kconfig macro ARM: davinci: mmc: derive version information from device name ARM: davinci: da850: add ECAP & EHRPWM clock nodes ARM: davinci: clk framework support for enable/disable functionality Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-15mmc: core: fix init controller performance regression, updated patchAdrian Hunter2-1/+4
Add MMC_CAP2_NO_PRESCAN_POWERUP to sdhci-pci.c also, use mmc_power_off() for MMC_CAP2_NO_PRESCAN_POWERUP. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> [cjb: previously applied v1 of this patch instead of v4] Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-15Merge tag 'msm-cleanup-3.10' of ↵Olof Johansson1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/cleanup From David Brown: Cleanups for MSM for 3.10 These are some patches for various parts of MSM that gradually bring us closer to being part of single zimage. * tag 'msm-cleanup-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: ARM: msm: Remove unused cpu.h header file gpio: Make gpio-msm-v1 into a platform driver mmc: msm_sdcc: Remove unnecessary include ARM: msm: Move dma.h #defines that are private to dma.c Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-13Merge tag 'dt-exynos-for-v3.10' of ↵Olof Johansson1-2/+81
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt2 update device tree for exynos4 and exynos5 * tag 'dt-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (125 commits) ARM: dts: add PDMA0 changes for exynos5440 ARM: dts: Add cpufreq controller node for Exynos5440 SoC ARM: dts: Fix gmac clock ids due to changes in Exynos5440 ARM: dts: add device tree file for SD5v1 board ARM: dts: update bootargs to boot from sda2 for exynos5440-ssdk5440 ARM: dts: add PMU support in exynos5440 ARM: dts: Add node for GMAC for exynos5440 ARM: dts: list the interrupts generated by pin-controller on Exynos5440 ARM: dts: Add FIMD DT binding Documentation ARM: dts: Add FIMD node and display timing node to exynos4412-origen.dts ARM: dts: Add FIMD node to exynos4 ARM: dts: Add SYSREG block node for S5P/Exynos4 SoC series ARM: dts: Add display timing node to exynos5250-smdk5250.dts ARM: dts: Add FIMD node to exynos5 ARM: dts: Add virtual GIC DT bindings for exynos5440 ARM: dts: Document usb clocks in samsung,exynos4210-ehci/ohci bindings ARM: dts: add usb 2.0 clock references to exynos5250 device tree ARM: dts: Add architected timer nodes for exynos5250 ARM: dts: Declare the gic as a15 compatible for exynos5250 ARM: dts: Add HDMI HPD and regulator node for Arndale board ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-12mmc: mxcmmc: enable DMA support on mpc512xAnatolij Gustschin1-2/+33
Add SDHC DMA channel description to the mpc512x device tree to enable slave channel requesting in the mxcmmc driver. mpc512x DMA engine doesn't support endianness conversion when reading/writing data from peripheral's FIFO, so we have to swap data buffers before each DMA write and after each DMA read transfer manually. Since chained SDHC DMA transfers are not supported on mpc512x, limit 'max_segs' tunable parameter to one and initialise it to 64 only when running on i.MX platforms. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: constify mxcmci_devtypeAnatolij Gustschin1-1/+1
mxcmci_devtype struct contains constant data, so constify this struct. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: use slot-gpio API for write-protect detectionAnatolij Gustschin1-3/+5
slot-gpio API suppors read-only detection when "wp-gpios" property is present in the device tree mmc node. Use this API for write-protect detection. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: add mpc512x SDHC supportAnatolij Gustschin2-49/+94
The SDHC controller on mpc512x is compatible with i.MX31 SDHC, so the mxcmmc driver can be used on mpc512x, too. Extend the driver to support mpc512x as well. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: fix race conditions for host->req and host->data accessAnatolij Gustschin1-7/+24
mxcmci_dma_callback() is invoked by DMA drivers in soft-irq context and can be interrupted by the mxcmci_irq() interrupt which can finish the mmc request or data transfer and set host->req or host->data pointers to NULL. Then mxcmci_data_done() crashes with a null pointer dereferences. Protect all accesses to host->req and host->data by spin locks. Also check host->data pointer in mxcmci_watchdog() before dereferencing it. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: DT supportMarkus Pargmann1-18/+61
Adding devicetree support for imx21-mmc and imx31-mmc. Based on generic gpio helper functions by Guennadi and generic DMA devicetree bindings. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: dw_mmc: let device core setup the default pin configurationThomas Abraham3-49/+0
With device core now able to setup the default pin configuration, the pin configuration code based on the deprecated Samsung specific gpio bindings is removed. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxs-mmc: add broken-cd propertyHector Palacios1-1/+3
According to bindings documentation for mmc, the property 'broken-cd' can be used to indicate card-detection is not available and polling must be used instead. This patch retrieves this property and sets a custom flag. On the get_cd() hook, it returns 1 if the flag is set, to always assume the card is present. Signed-off-by: Hector Palacios <hector.palacios@digi.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxs-mmc: add non-removable propertyMarc Kleine-Budde1-3/+7
Some boards have non removable cards like eMMC. Handle such case. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxs-mmc: add cd-inverted propertyMarc Kleine-Budde1-1/+4
The card-detect GPIO is inverted on some boards. Handle such case. Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed caseLi Fei2-3/+4
Even in failed case of pm_runtime_get_sync, the usage_count is incremented. In order to keep the usage_count with correct value and runtime power management to behave correctly, call pm_runtime_put_noidle in such case. Signed-off-by: Liu Chuansheng <chuansheng.liu@intel.com> Signed-off-by: Li Fei <fei.li@intel.com> Acked-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: Fix bug when card is present during bootAlexander Shiyan1-2/+2
This patch fixes bug when card is present during boot. Bug was introduced due commit "mmc: mxcmmc: fix bug that may block a data transfer forever". When a card is present "mxcmci_setup_data" function is executed, but the timer is not initialized. ... i.MX SDHC driver mmc0: SD Status: Invalid Allocation Unit size. mmc0: new SD card at address b368 mmcblk0: mmc0:b368 SDC 1.91 GiB ------------[ cut here ]------------ kernel BUG at kernel/timer.c:729! Internal error: Oops - BUG: 0 [#1] PREEMPT ARM CPU: 0 Not tainted (3.9.0-rc5-next-20130404 #2) PC is at mod_timer+0x168/0x198 LR is at mxcmci_request+0x21c/0x328 ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: core: fix performance regression initializing MMC host controllersAdrian Hunter2-1/+4
Commit fa5501890d8974301042e0202d342a6cbe8609f4 introduced a performance regression by adding mmc_power_up() to mmc_start_host(). mmc_power_up() is not necessary to host controller initialization, it is part of card initialization and is performed anyway asynchronously. This patch allows a driver to leave the power up in asynchronous code (as it was before). On my current target platform this reduces driver initialization from: [ 1.313220] initcall sdhci_acpi_driver_init+0x0/0x12 returned 0 after 102008 usecs to this: [ 1.217209] initcall sdhci_acpi_driver_init+0x0/0x12 returned 0 after 8331 usecs Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12Revert "mmc: core: wait while adding MMC host to ensure root mounts ↵Adrian Hunter1-1/+0
successfully" This reverts commit 3500ed90b26a9935b943b5e2e4cd3226600d6b58. The reverted patch caused a significant performance regression when booting with the root file system on eMMC. Before the patch: [ 1.625623] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. After the patch: [ 1.935851] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. That was an addition of 310 ms which is a 19% performance degradation. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-08mmc: atmel-mci: pio hang on block errorsTerry Barnaby1-4/+10
The driver is doing, by default, multi-block reads. When a block error occurs, card/block.c instigates a single block read: "mmcblk0: retrying using single block read". It leaves the sg chain intact and just changes the length attribute for the first sg entry and the overall sg_len parameter. When atmci_read_data_pio is called to read the single block of data it ignores the sg_len and expects to read more than 512 bytes as it sees there are multiple items in the sg list. No more data comes as the controller has only been commanded to get one block. Signed-off-by: Terry Barnaby <terry@beam.ltd.uk> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: stable <stable@vger.kernel.org> # 3.2+ Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04mmc: core: Fix bit width test failing on old eMMC cardsPhilip Rakity1-1/+1
PARTITION_SUPPORT needs to be set before doing the compare on version number so the bit width test does not get invalid data. Before this patch, a Sandisk iNAND eMMC card would detect 1-bit width although the hardware supports 4-bit. Only affects old emmc devices - pre 4.4 devices. Reported-by: Elad Yi <elad.yi@gmail.com> Signed-off-by: Philip Rakity <prakity@yahoo.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04mmc: dw_mmc: Use pr_info instead of printkSachin Kamat1-1/+1
pr_info(... is preferred to printk(KERN_INFO ... Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04mmc: dw_mmc: Check return value of regulator_enableSachin Kamat1-4/+16
regulator_enable() is declared with __must_check attribute. Hence check the return value to ensure that the regulator is enabled. Fixes the following warning: drivers/mmc/host/dw_mmc.c:2461:19: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result [-Wunused-result] drivers/mmc/host/dw_mmc.c: In function ‘dw_mci_init_slot’: drivers/mmc/host/dw_mmc.c:1994:19: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04mmc: sdhci-spear: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han1-1/+1
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/mmc/host/sdhci-spear.c:295:12: warning: 'sdhci_suspend' defined but not used [-Wunused-function] drivers/mmc/host/sdhci-spear.c:308:12: warning: 'sdhci_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04mmc: dw_mmc: control the power-enable registerJaehoon Chung1-0/+6
When card is power-on/off, need to control the power-enable register. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04mmc: sdhci-pxav3: controller should use SDCLK for timeout calculationKevin Liu1-1/+1
sdhci-pxav3 host controller used SDCLK for data timeout. Signed-off-by: Kevin Liu <kliu5@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04mmc: sdhci-pxav3: enhance device tree parser codeKevin Liu1-19/+5
1. seperate device tree parsing from platform data handling which can make further work easy when platform data can be removed. 2. add calling mmc_of_parse which can parse more of property and pxav3_get_mmc_pdata can be shrinked a lot. Signed-off-by: Kevin Liu <kliu5@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04mmc: sdhci-pxav3: remove cd-broken quirk for permanently present cardKevin Liu1-4/+2
Flag PXA_FLAG_CARD_PERMANENT is set in sdhci_pxa_platdata flags to indicate that the card is always wired to host, like on-chip emmc, which is permanently present and don't need detection. So only MMC_CAP_NONREMOVABLE should be set for this case. But current code also sets SDHCI_QUIRK_BROKEN_CARD_DETECTION, which doesn't make sense. Signed-off-by: Kevin Liu <kliu5@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04mmc: sdhci-pxav3: transfer sdhci_pltfm_data as args to sdhci_pltfm_initKevin Liu1-8/+9
sdhci_pltfm_init can set host->ops and host->quirks if sdhci_pltfm_data is transfered as arguments. Then no need to set them manually in sdhci_pxav3_probe. Signed-off-by: Kevin Liu <kliu5@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04mmc: dw_mmc: fix fifo access for 64-bitSeungwon Jeon1-1/+2
mci_writew causes a failure of fifo access for 64-bit. mci_writeq is correct. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04mmc: mxs-mmc: move to use generic DMA helperShawn Guo1-43/+5
With the generic DMA device tree helper supported by mxs-dma driver, client devices only need to call dma_request_slave_channel() for requesting a DMA channel from dmaengine. Since mxs is a DT only platform now, along with the changes, the non-DT case checking in probe function also gets cleaned up. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Chris Ball <cjb@laptop.org> Cc: linux-mmc@vger.kernel.org Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2013-04-04mmc: davinci_mmc: add DT supportManjunathappa, Prakash1-4/+66
Adds device tree support for davinci_mmc. Also add binding documentation. As of now tested for non-dma PIO mode and without GPIO card_detect/ write_protect option because of dependencies on EDMA and GPIO module DT support. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: davinci-linux-open-source@linux.davincidsp.com Cc: devicetree-discuss@lists.ozlabs.org Cc: cjb@laptop.org Cc: Sekhar Nori <nsekhar@ti.com> Cc: mporter@ti.com Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-03ARM: davinci: mmc: derive version information from device nameManjunathappa, Prakash1-1/+17
Remove specifying mmc controller IP version information via platform data, instead specify device name so that driver derives it from platform_device_id table. Also change the clock node name to match the changed dev_id. Tested on da850-evm to make sure driver loads without clk_get failures. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-03-22mmc: mvsdio: use dev_*() API instead of pr_*() APIThomas Petazzoni1-22/+15
The mvsdio driver was already using some dev_*() functions to print some messages, but still using pr_*() functions for some others. This patch converts all messages to use dev_*() functions. Many of the pr_*() function calls were printing the output of mmc_hostname() to preprend the message with an identifier for the device. Since the dev_*() functions do that automatically, this patch also gets rid of those string prefixes. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22mmc: mvsdio: fix non-DT probing of GPIOsThomas Petazzoni1-2/+2
Ralph Droms <rdroms@gmail.com> reported that 3.9-rc was breaking the SDIO interface on his Sheevaplug platform, and that the recent changes to the mvsdio driver are responsible for this breakage. Precisely, the regression has been introduced by 07728b77c03d (mmc: mvsdio: use slot-gpio for card detect gpio). After investigation, is turns out that the Sheevaplug does not have any "card detect" GPIO, and the Sheevaplug has not been converted to the Device Tree. Therefore, the Sheevaplug board code does not define a value for the .gpio_card_detect field of the mvsdio_platform_data structure, which means that its value is 0. Unfortunately, gpio_is_valid() considers 0 as a valid GPIO, and therefore calls mmc_gpio_request_cd(), which fails and makes the entire probing of the driver fail. In fact, in the previous mvsdio code, before the Device Tree binding was introduced, 0 was not considered as a valid GPIO. Therefore, this fix revert back to this behavior in the non-DT case, by setting the gpio_card_detect and gpio_write_protect local variables to -EINVAL when the corresponding fields of the mvsdio_platform_data structure are set to zero (i.e, left undefined). Of course, it prevents to use GPIO 0 as a card detect or write protect GPIO, but it was a defiency of the previous non-DT code, and the fix moving forward is to convert platforms to the Device Tree. The problem has been reproduced successfully on the Kirkwood-based Marvell DB-88F6281-BP Development Board (that doesn't use the Device Tree) and the fix has proven to work properly, after of course removing the gpio_card_detect field of the mvsdio_platform_data instance for this board. Reported-by: Ralph Droms <rdroms@gmail.com> Tested-by: Ralph Droms <rdroms@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22mmc: sdhci-sirf: add mmc host sdhci-pltfm based driver for SiRF SoCsBarry Song3-0/+205
This patch adds the new driver for CSR SiRF SoCs: SiRFprimaII: unicore ARM Cortex-A9 SiRFatlas6: unicore ARM Cortex-A9 SiRFmarco: dual core ARM Cortex-A9 SMP Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Bin Shi <Bin.Shi@csr.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22mmc: block: fix the host's claim-release in special requestSeungwon Jeon3-5/+10
For normal request mmc_blk_issue_rq is called twice with asynchronous transfer(cur and prev). Host's claim and release can be done in each mmc_blk_issue_rq. However, Special request is currently excluded in asynchronous transfer. After special request is finished, if there is no new request, mmc_release_host won't be called in mmc_blk_issue_rq. The problem is founded during mmc_suspend. [<c0541124>] (__schedule+0x0/0x78c) from [<c05419e8>] (schedule+0x38/0x78) [<c05419b0>] (schedule+0x0/0x78) from [<c03a843c>] (__mmc_claim_host+0xac/0x1b4) [<c03a8390>] (__mmc_claim_host+0x0/0x1b4) from [<c03ac98c>] (mmc_suspend+0x28/0x9c) [<c03ac964>] (mmc_suspend+0x0/0x9c) from [<c03aad24>] (mmc_suspend_host+0xb4/0x194) ... Reported-by: Johan Rudholm <jrudholm@gmail.com> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>