summaryrefslogtreecommitdiff
path: root/drivers/mtd/devices
AgeCommit message (Collapse)AuthorFilesLines
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-10/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner2-30/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner3-15/+3
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner3-0/+3
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-06mtd: phram: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/mtd/devices/phram.c: In function ‘parse_num64’: drivers/mtd/devices/phram.c:149:11: warning: this statement may fall through [-Wimplicit-fallthrough=] shift += 10; ~~~~~~^~~~~ drivers/mtd/devices/phram.c:150:4: note: here case 'M': ^~~~ drivers/mtd/devices/phram.c:151:11: warning: this statement may fall through [-Wimplicit-fallthrough=] shift += 10; ~~~~~~^~~~~ drivers/mtd/devices/phram.c:152:4: note: here case 'k': ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-04-18mtd: nand: Clarify Kconfig entry for software BCH ECC algorithmMiquel Raynal1-1/+1
There is no point in having two distinct entries, merge them and rename the symbol for more clarity: MTD_NAND_ECC_SW_BCH Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-05Merge tag 'mtd/for-5.1' of git://git.infradead.org/linux-mtdLinus Torvalds3-7/+11
Pull MTD updates from Boris Brezillon: "Core MTD changes: - Use struct_size() where appropriate - mtd_{read,write}() as wrappers around mtd_{read,write}_oob() - Fix misuse of PTR_ERR() in docg3 - Coding style improvements in mtdcore.c SPI NOR changes: Core changes: - Add support of octal mode I/O transfer - Add a bunch of SPI NOR entries to the flash_info table SPI NOR controller driver changes: - cadence-quadspi: * Add support for Octal SPI controller * write upto 8-bytes data in STIG mode - mtk-quadspi: * rename config to a common one * add SNOR_HWCAPS_READ to spi_nor_hwcaps mask - Add Tudor as SPI-NOR co-maintainer NAND changes: NAND core changes: - Fourth batch of fixes/cleanup to the raw NAND core impacting various controller drivers (Sunxi, Marvell, MTK, TMIO, OMAP2). - Check the return code of nand_reset() and nand_readid_op(). - Remove ->legacy.erase and single_erase(). - Simplify the locking. - Several implicit fall through annotations. Raw NAND controllers drivers changes: - Fix various possible object reference leaks (MTK, JZ4780, Atmel) - ST: * Add support for STM32 FMC2 NAND flash controller - Meson: * Add support for Amlogic NAND flash controller - Denali: * Several cleanup patches - Sunxi: * Several cleanup patches - FSMC: * Disable NAND on remove() * Reset NAND timings on resume() SPI-NAND drivers changes: - Toshiba: * Add support for all Toshiba products. - Macronix: * Fix ECC status read. - Gigadevice: * Add support for GD5F1GQ4UExxG" * tag 'mtd/for-5.1' of git://git.infradead.org/linux-mtd: (64 commits) mtd: spi-nor: Fix wrong abbreviation HWCPAS mtd: spi-nor: cadence-quadspi: fix spelling mistake: "Couldnt't" -> "Couldn't" mtd: spi-nor: Add support for en25qh64 mtd: spi-nor: Add support for MX25V8035F mtd: spi-nor: Add support for EN25Q80A mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC mtd: spi-nor: split s25fl128s into s25fl128s0 and s25fl128s1 mtd: spi-nor: cadence-quadspi: write upto 8-bytes data in STIG mode mtd: spi-nor: Add support for mx25u3235f mtd: rawnand: denali_dt: remove single anonymous clock support mtd: rawnand: mtk: fix possible object reference leak mtd: rawnand: jz4780: fix possible object reference leak mtd: rawnand: atmel: fix possible object reference leak mtd: rawnand: fsmc: Disable NAND on remove() mtd: rawnand: fsmc: Reset NAND timings on resume() mtd: spinand: Add support for GigaDevice GD5F1GQ4UExxG mtd: rawnand: denali: remove unused dma_addr field from denali_nand_info mtd: rawnand: denali: remove unused function argument 'raw' mtd: rawnand: denali: remove unneeded denali_reset_irq() call ...
2019-02-25Merge tag 'spi-nor/for-5.1' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon1-1/+8
SPI NOR Changes Core changes: - Add support of octal mode I/O transfer - Add a bunch of SPI NOR entries to the flash_info table SPI NOR controller driver changes: - cadence-quadspi: * Add support for Octal SPI controller * write upto 8-bytes data in STIG mode - mtk-quadspi: * rename config to a common one * add SNOR_HWCAPS_READ to spi_nor_hwcaps mask MAINTAINERS: - Add Tudor as SPI-NOR co-maintainer
2019-02-13mtd: powernv_flash: Fix device registration errorAneesh Kumar K.V1-1/+1
This change helps me to get multiple mtd device registered. Without this I get sysfs: cannot create duplicate filename '/bus/nvmem/devices/flash0' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2-00557-g1ef20ef21f22 #13 Call Trace: [c0000000b38e3220] [c000000000b58fe4] dump_stack+0xe8/0x164 (unreliable) [c0000000b38e3270] [c0000000004cf074] sysfs_warn_dup+0x84/0xb0 [c0000000b38e32f0] [c0000000004cf6c4] sysfs_do_create_link_sd.isra.0+0x114/0x150 [c0000000b38e3340] [c000000000726a84] bus_add_device+0x94/0x1e0 [c0000000b38e33c0] [c0000000007218f0] device_add+0x4d0/0x830 [c0000000b38e3480] [c0000000009d54a8] nvmem_register.part.2+0x1c8/0xb30 [c0000000b38e3560] [c000000000834530] mtd_nvmem_add+0x90/0x120 [c0000000b38e3650] [c000000000835bc8] add_mtd_device+0x198/0x4e0 [c0000000b38e36f0] [c00000000083619c] mtd_device_parse_register+0x11c/0x280 [c0000000b38e3780] [c000000000840830] powernv_flash_probe+0x180/0x250 [c0000000b38e3820] [c00000000072c120] platform_drv_probe+0x60/0xf0 [c0000000b38e38a0] [c0000000007283c8] really_probe+0x138/0x4d0 [c0000000b38e3930] [c000000000728acc] driver_probe_device+0x13c/0x1b0 [c0000000b38e39b0] [c000000000728c7c] __driver_attach+0x13c/0x1c0 [c0000000b38e3a30] [c000000000725130] bus_for_each_dev+0xa0/0x120 [c0000000b38e3a90] [c000000000727b2c] driver_attach+0x2c/0x40 [c0000000b38e3ab0] [c0000000007270f8] bus_add_driver+0x228/0x360 [c0000000b38e3b40] [c00000000072a2e0] driver_register+0x90/0x1a0 [c0000000b38e3bb0] [c00000000072c020] __platform_driver_register+0x50/0x70 [c0000000b38e3bd0] [c00000000105c984] powernv_flash_driver_init+0x24/0x38 [c0000000b38e3bf0] [c000000000010904] do_one_initcall+0x84/0x464 [c0000000b38e3cd0] [c000000001004548] kernel_init_freeable+0x530/0x634 [c0000000b38e3db0] [c000000000011154] kernel_init+0x1c/0x168 [c0000000b38e3e20] [c00000000000bed4] ret_from_kernel_thread+0x5c/0x68 mtd mtd1: Failed to register NVMEM device With the change we now have root@(none):/sys/bus/nvmem/devices# ls -al total 0 drwxr-xr-x 2 root root 0 Feb 6 20:49 . drwxr-xr-x 4 root root 0 Feb 6 20:49 .. lrwxrwxrwx 1 root root 0 Feb 6 20:49 flash@0 -> ../../../devices/platform/ibm,opal:flash@0/mtd/mtd0/flash@0 lrwxrwxrwx 1 root root 0 Feb 6 20:49 flash@1 -> ../../../devices/platform/ibm,opal:flash@1/mtd/mtd1/flash@1 Fixes: 1cbb4a1c433a ("mtd: powernv: Add powernv flash MTD abstraction driver") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-01-29mtd: docg3: fix a possible memory leak of mtd->nameYueHaibing1-3/+2
In case DOC_CHIPID_G3, mtd->name is not freed in err handling path, which is alloced by kasprintf(). Fix this by using devm_kasprintf(). Fixes: ae9d4934b2d7 ("mtd: docg3: add multiple floor support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-01-29mtd: docg3: Fix passing zero to 'PTR_ERR' warning in doc_probe_deviceYueHaibing1-1/+1
Fix a static code checker warning: drivers/mtd/devices/docg3.c:1875 doc_probe_device() warn: passing zero to 'ERR_PTR' Fixes: ae9d4934b2d7 ("mtd: docg3: add multiple floor support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-01-17mtd: m25p80: add support of octal mode I/O transferYogesh Narayan Gaur1-1/+8
Add support for octal mode I/O data transfer based on the controller (spi) mode. Assign hw-capability mask bits for octal transfer. Signed-off-by: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-01-08mtd: mtdram: Expose module parametersRichard Weinberger1-2/+0
Since we can set module parameters also when a driver is built in, it makes no sense to protect module parameter with #ifdef MODULE. Now the mtdram sizes can also set when the module is not a loadable module. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2018-12-29Merge tag 'devicetree-for-4.21' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: "The biggest highlight here is the start of using json-schema for DT bindings. Being able to validate bindings has been discussed for years with little progress. - Initial support for DT bindings using json-schema language. This is the start of converting DT bindings from free-form text to a structured format. - Reworking of initrd address initialization. This moves to using the phys address instead of virt addr in the DT parsing code. This rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary rebuilding of lots of files. - Fix stale phandle entries in phandle cache - DT overlay validation improvements. This exposed several memory leak bugs which have been fixed. - Use node name and device_type helper functions in DT code - Last remaining conversions to using %pOFn printk specifier instead of device_node.name directly - Create new common RTC binding doc and move all trivial RTC devices out of trivial-devices.txt. - New bindings for Freescale MAG3110 magnetometer, Cadence Sierra PHY, and Xen shared memory - Update dtc to upstream version v1.4.7-57-gf267e674d145" * tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits) of: __of_detach_node() - remove node from phandle cache of: of_node_get()/of_node_put() nodes held in phandle cache gpio-omap.txt: add reg and interrupts properties dt-bindings: mrvl,intc: fix a trivial typo dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110 dt-bindings: Convert trivial-devices.txt to json-schema dt-bindings: arm: mrvl: amend Browstone compatible string dt-bindings: arm: Convert Tegra board/soc bindings to json-schema dt-bindings: arm: Convert ZTE board/soc bindings to json-schema dt-bindings: arm: Add missing Xilinx boards dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema dt-bindings: arm: Convert VIA board/soc bindings to json-schema dt-bindings: arm: Convert ST STi board/soc bindings to json-schema dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema dt-bindings: arm: Convert QCom board/soc bindings to json-schema dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema dt-bindings: arm: Convert Altera board/soc bindings to json-schema ...
2018-12-18Merge tag 'nand/for-4.21' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon1-1/+1
NAND core changes: - kernel-doc miscellaneous fixes. - Third batch of fixes/cleanup to the raw NAND core impacting various controller drivers (ams-delta, marvell, fsmc, denali, tegra, vf610): * Stopping to pass mtd_info objects to internal functions * Reorganizing code to avoid forward declarations * Dropping useless test in nand_legacy_set_defaults() * Moving nand_exec_op() to internal.h * Adding nand_[de]select_target() helpers * Passing the CS line to be selected in struct nand_operation * Making ->select_chip() optional when ->exec_op() is implemented * Deprecating the ->select_chip() hook * Moving the ->exec_op() method to nand_controller_ops * Moving ->setup_data_interface() to nand_controller_ops * Deprecating the dummy_controller field * Fixing JEDEC detection * Providing a helper for polling GPIO R/B pin Raw NAND chip drivers changes: - Macronix: * Flagging 1.8V AC chips with a broken GET_FEATURES(TIMINGS) Raw NAND controllers drivers changes: - Ams-delta: * Fixing the error path * SPDX tag added * May be compiled with COMPILE_TEST=y * Conversion to ->exec_op() interface * Dropping .IOADDR_R/W use * Use GPIO API for data I/O - Denali: * Removing denali_reset_banks() * Removing ->dev_ready() hook * Including <linux/bits.h> instead of <linux/bitops.h> * Changes to comply with the above fixes/cleanup done in the core. - FSMC: * Adding an SPDX tag to replace the license text * Making conversion from chip to fsmc consistent * Fixing unchecked return value in fsmc_read_page_hwecc * Changes to comply with the above fixes/cleanup done in the core. - Marvell: * Preventing timeouts on a loaded machine (fix) * Changes to comply with the above fixes/cleanup done in the core. - OMAP2: * Pass the parent of pdev to dma_request_chan() (fix) - R852: * Use generic DMA API - sh_flctl: * Converting to SPDX identifiers - Sunxi: * Write pageprog related opcodes to the right register: WCMD_SET (fix) - Tegra: * Stop implementing ->select_chip() - VF610: * Adding an SPDX tag to replace the license text * Changes to comply with the above fixes/cleanup done in the core. - Various trivial/spelling/coding style fixes. SPI-NAND drivers changes: - Removing the depreacated mt29f_spinand driver from staging. - Adding support for: * Toshiba TC58CVG2S0H * GigaDevice GD5FxGQ4xA * Winbond W25N01GV
2018-12-13Merge branch 'yaml-bindings-for-v4.21' into dt/nextRob Herring1-1/+1
2018-12-03mtd: use DEFINE_SHOW_ATTRIBUTE() instead of open-coding itYangtao Li2-19/+8
DEFINE_SHOW_ATTRIBUTE macro can help us simplify the code, so change to it. And change the DEBUGFS_RO_ATTR macro defined in some file to a standard macro. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-11-27mtd: Convert to using %pOFn instead of device_node.nameRob Herring1-1/+1
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linux-mtd@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-11-09mtd: block2mtd: mark expected switch fall-throughsGustavo A. R. Silva1-0/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 402015 ("Missing break in switch") Addresses-Coverity-ID: 402016 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-11-05mtd: docg3: don't set conflicting BCH_CONST_PARAMS optionArnd Bergmann1-1/+1
I noticed during the creation of another bugfix that the BCH_CONST_PARAMS option that is set by DOCG3 breaks setting variable parameters for any other users of the BCH library code. The only other user we have today is the MTD_NAND software BCH implementation (most flash controllers use hardware BCH these days and are not affected). I considered removing BCH_CONST_PARAMS entirely because of the inherent conflict, but according to the description in lib/bch.c there is a significant performance benefit in keeping it. To avoid the immediate problem of the conflict between MTD_NAND_BCH and DOCG3, this only sets the constant parameters if MTD_NAND_BCH is disabled, which should fix the problem for all cases that are affected. This should also work for all stable kernels. Note that there is only one machine that actually seems to use the DOCG3 driver (arch/arm/mach-pxa/mioa701.c), so most users should have the driver disabled, but it almost certainly shows up if we wanted to test random kernels on machines that use software BCH in MTD. Fixes: d13d19ece39f ("mtd: docg3: add ECC correction code") Cc: stable@vger.kernel.org Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-23Merge tag 'mtd/for-4.20' of git://git.infradead.org/linux-mtdLinus Torvalds1-15/+8
Pull mtd updates from Boris Brezillon: "SPI NOR core changes: - Support non-uniform erase size - Support controllers with limited TX fifo size Driver changes: - m25p80: Re-issue a WREN command after each write access - cadence: Pass a proper dir value to dma_[un]map_single() - fsl-qspi: Check fsl_qspi_get_seqid() return val make sure 4B addressing opcodes are properly handled - intel-spi: Add a new PCI entry for Ice Lake Raw NAND core changes: - Two batchs of cleanups of the NAND API, including: * Deprecating a lot of interfaces (now replaced by ->exec_op()). * Moving code in separate drivers (JEDEC, ONFI), in private files (internals), in platform drivers, etc. * Functions/structures reordering. * Exclusive use of the nand_chip structure instead of the MTD one all across the subsystem. - Addition of the nand_wait_readrdy/rdy_op() helpers. Raw NAND controllers drivers changes: - Various coccinelle patches. - Marvell: * Use regmap_update_bits() for syscon access. * More documentation. * BCH failure path rework. * More layouts to be supported. * IRQ handler complete() condition fixed. - Fsl_ifc: * SRAM initialization fixed for newer controller versions. - Denali: * Fix licenses mismatch and use a SPDX tag. * Set SPARE_AREA_SKIP_BYTES register to 8 if unset. - Qualcomm: * Do not include dma-direct.h. - Docg4: * Removed. - Ams-delta: * Use of a GPIO lookup table * Internal machinery changes. Raw NAND chip drivers changes: - Toshiba: * Add support for Toshiba memory BENAND * Pass a single nand_chip object to the status helper. - ESMT: * New driver to retrieve the ECC requirements from the 5th ID byte. MTD changes: - physmap cleanups/fixe - gpio-addr-flash cleanups/fixes" * tag 'mtd/for-4.20' of git://git.infradead.org/linux-mtd: (93 commits) jffs2: free jffs2_sb_info through jffs2_kill_sb() mtd: spi-nor: fsl-quadspi: fix read error for flash size larger than 16MB mtd: spi-nor: intel-spi: Add support for Intel Ice Lake SPI serial flash mtd: maps: gpio-addr-flash: Convert to gpiod mtd: maps: gpio-addr-flash: Replace array with an integer mtd: maps: gpio-addr-flash: Use order instead of size mtd: spi-nor: fsl-quadspi: Don't let -EINVAL on the bus mtd: devices: m25p80: Make sure WRITE_EN is issued before each write mtd: spi-nor: Support controllers with limited TX FIFO size mtd: spi-nor: cadence-quadspi: Use proper enum for dma_[un]map_single mtd: spi-nor: parse SFDP Sector Map Parameter Table mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories mtd: rawnand: marvell: fix the IRQ handler complete() condition mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES register to 8 if unset mtd: rawnand: r852: fix spelling mistake "card_registred" -> "card_registered" mtd: rawnand: toshiba: Pass a single nand_chip object to the status helper mtd: maps: gpio-addr-flash: Use devm_* functions mtd: maps: gpio-addr-flash: Fix ioremapped size mtd: maps: gpio-addr-flash: Replace custom printk mtd: physmap_of: Release resources on error ...
2018-10-08mtd: devices: m25p80: Make sure WRITE_EN is issued before each writeYogesh Gaur1-15/+8
Some SPI controllers can't write nor->page_size bytes in a single step because their TX FIFO is too small, but when that happens we should make sure a WRITE_EN command before each write access and READ_SR command after each write access is issued. The core is already taking care of that, so all we have to do here is return the actual number of bytes that were written during the spi_mem_exec_op() operation. Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-09-18mtd: devices: m25p80: Make sure the buffer passed in op is DMA-ableBoris Brezillon1-3/+23
As documented in spi-mem.h, spi_mem_op->data.buf.{in,out} must be DMA-able, and commit 4120f8d158ef ("mtd: spi-nor: Use the spi_mem_xx() API") failed to follow this rule as buffers passed to ->{read,write}_reg() are usually placed on the stack. Fix that by allocating a scratch buffer and copying the data around. Fixes: 4120f8d158ef ("mtd: spi-nor: Use the spi_mem_xx() API") Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
2018-08-14Merge tag 'spi-v4.19' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite an active release for the SPI subsystem, lots of small updates and fixes scattered about with highlights including: - 3-wire support in the GPIO driver. - support for setting a custom memory name in the memory mapped flash drivers. - support for extended mode in the Freescale DSPI controller. - support for the non-standard integration with the Microsemi Ocelot platform in the DesignWare driver. - new driver for the SocioNext UniPhier" * tag 'spi-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (47 commits) spi: davinci: fix a NULL pointer dereference spi: spi-mem: Constify spi_mem->name mtd: m25p80: Call spi_mem_get_name() to let controller set a custom name spi: spi-mem: Extend the SPI mem interface to set a custom memory name spi: spi-mem: Fix a typo in the documentation of struct spi_mem spi: uniphier: remove unnecessary include headers spi: spi-gpio: add SPI_3WIRE support spi: add flags parameter to txrx_word function pointers spi: add SPI controller driver for UniPhier SoC spi: add DT bindings for UniPhier SPI controller spi: dw: document Microsemi integration spi: img-spfi: Set device select bits for SPFI port state spi: omap2-mcspi: remove several redundant variables spi: dw-mmio: add MSCC Ocelot support spi: dw: export dw_spi_set_cs spi: spi-fsl-espi: Log fifo counters on error spi: imx: Use the longuest possible burst size when in dynamic_burst spi: imx: remove unnecessary check in spi_imx_can_dma spi: imx: Use correct number of bytes per words spi: imx: Use dynamic bursts only when bits_per_word is 8, 16 or 32 ...
2018-08-11Merge tag 'spi-nor/for-4.19' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon1-4/+1
Pull SPI NOR updates from Boris Brezillon: " Core changes: - Apply reset hacks only when reset is explicitly marked as broken in the DT Driver changes: - Minor cleanup/fixes in the m25p80 driver - Release flash_np in the nxp-spifi driver - Add suspend/resume hooks to the atmel-quadspi driver - Include gpio/consumer.h instead of gpio.h in the atmel-quadspi driver - Use %pK instead of %p in the stm32-quadspi driver - Improve timeout handling in the cadence-quadspi driver - Use mtd_device_register() instead of mtd_device_parse_register() in the intel-spi driver "
2018-08-11Merge tag 'nand/for-4.19' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon1-2/+2
Pull NAND updates from Miquel Raynal: " NAND core changes: - Add the SPI-NAND framework. - Create a helper to find the best ECC configuration. - Create NAND controller operations. - Allocate dynamically ONFI parameters structure. - Add defines for ONFI version bits. - Add manufacturer fixup for ONFI parameter page. - Add an option to specify NAND chip as a boot device. - Add Reed-Solomon error correction algorithm. - Better name for the controller structure. - Remove unused caller_is_module() definition. - Make subop helpers return unsigned values. - Expose _notsupp() helpers for raw page accessors. - Add default values for dynamic timings. - Kill the chip->scan_bbt() hook. - Rename nand_default_bbt() into nand_create_bbt(). - Start to clean the nand_chip structure. - Remove stale prototype from rawnand.h. Raw NAND controllers drivers changes: - Qcom: structuring cleanup. - Denali: use core helper to find the best ECC configuration. - Possible build of almost all drivers by adding a dependency on COMPILE_TEST for almost all of them in Kconfig, implies various fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even changes in sparc64 and ia64 architectures. - Clean the ->probe() functions error path of a lot of drivers. - Migrate all drivers to use nand_scan() instead of nand_scan_ident()/nand_scan_tail() pair. - Use mtd_device_register() where applicable to simplify the code. - Marvell: * Handle on-die ECC. * Better clocks handling. * Remove bogus comment. * Add suspend and resume support. - Tegra: add NAND controller driver. - Atmel: * Add module param to avoid using dma. * Drop Wenyou Yang from MAINTAINERS. - Denali: optimize timings handling. - FSMC: Stop using chip->read_buf(). - FSL: * Switch to SPDX license tag identifiers. * Fix qualifiers in MXC init functions. Raw NAND chip drivers changes: - Micron: * Add fixup for ONFI revision. * Update ecc_stats.corrected. * Make ECC activation stateful. * Avoid enabling/disabling ECC when it can't be disabled. * Get the actual number of bitflips. * Allow forced on-die ECC. * Support 8/512 on-die ECC. * Fix on-die ECC detection logic. - Hynix: * Fix decoding the OOB size on H27UCG8T2BTR. * Use ->exec_op() in hynix_nand_reg_write_op(). "
2018-08-10Merge branch 'spi-4.19' into spi-nextMark Brown1-0/+3
2018-08-02mtd: m25p80: Call spi_mem_get_name() to let controller set a custom nameFrieder Schrempf1-0/+3
By calling spi_mem_get_name(), the driver of the (Q)SPI controller can set a custom name for the memory device if necessary. This is useful to keep mtdparts compatible when controller drivers are ported from the MTD to the SPI layer. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Frieder Schrempf <frieder.schrempf@exceet.de> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-20mtd: Make Kconfig formatting consistentBoris Brezillon1-2/+2
Fix indentation and replace '---help---' by 'help' to make things consistent. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-18mtd: sst25l: use mtd_device_register()Rafał Miłecki1-3/+2
This driver doesn't specify parsers so it can use that little helper. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-18mtd: powernv_flash: set of_node in mtd's devRafał Miłecki1-0/+1
This enables some features implemented in mtd subsystem like reading label and partitioning info from DT. Reported-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-06-22mtd: dataflash: Use ULL suffix for 64-bit constantsGeert Uytterhoeven1-2/+2
With gcc 4.1.2 when compiling for 32-bit: drivers/mtd/devices/mtd_dataflash.c:736: warning: integer constant is too large for ‘long’ type drivers/mtd/devices/mtd_dataflash.c:737: warning: integer constant is too large for ‘long’ type Add the missing "ULL" suffixes to fix this. Fixes: 67e4145ebf2c161d ("mtd: dataflash: Add flash_info for AT45DB641E") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-06-18mtd: m25p80: Use SPI_MEM_OP_NO_DUMMY instead of SPI_MEM_OP_DUMMY(0, x)Boris Brezillon1-2/+1
SPI_MEM_OP_DUMMY(0, x) means there's 0 dummy bytes to send, which is similar to SPI_MEM_OP_NO_DUMMY except it's less clear. Use SPI_MEM_OP_NO_DUMMY instead of SPI_MEM_OP_DUMMY(0, x) in m25p80_write(). Also stop updating op.dummy.buswidth since this value is only meaningful if you have dummy bytes. Reported-by: Cyrille Pitchen <cyrille.pitchen@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Marek Vasut <marek.vasut@gmail.com>
2018-06-18mtd: m25p80: Remove unneeded m25p->command fieldBoris Brezillon1-2/+0
The ->command field is no longer used, remove it. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Marek Vasut <marek.vasut@gmail.com>
2018-06-13treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-1/+1
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-08Merge tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtdLinus Torvalds2-3/+2
Pull MTD updates from Boris Brezillon: "Core changes: - Add a sysfs attribute to expose available OOB size Driver changes: - Remove HAS_DMA dependency on various drivers - Use dev_get_drvdata() instead of platform_get_drvdata() in docg3 - Replace msleep by usleep_range() in the dataflash driver - Avoid VLA usage in nftl layers - Remove useless .owner assignment in pismo - Fix various issues in the CFI driver - Improve TRX partition handling expose a DT compat for this part parser - Clarify OFFSET_CONTINUOUS meaning NAND core changes: - Add Miquel as a NAND maintainer - Add access mode to the nand_page_io_req struct - Fix kernel-doc in rawnand.h - Support bit-wise majority to recover from corrupted ONFI parameter pages - Stop checking FAIL bit after a SET_FEATURES, as documented in the ONFI spec Raw NAND Driver changes: - Fix and cleanup the error path of many NAND controller drivers - GPMI: + Cleanup/simplification of a few aspects in the driver + Take ECC setup specified in the DT into account - sunxi: remove support for GPIO-based R/B polling - MTK: + Use of_device_get_match_data() instead of of_match_device() + Add an entry in MAINTAINERS for this driver + Fix nand-ecc-step-size and nand-ecc-strength description in the DT bindings doc - fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page OneNAND driver changes: - samsung: use dev_get_drvdata() instead of platform_get_drvdata() SPI NOR core changes: - Add support for a bunch of SPI NOR chips - Clear EAR reg when switching to 3-byte addressing mode on Winbond chips SPI NOR controller driver changes: - cadence: Add DMA support for direct mode reads - hisi: Prefix a few functions with hisi_ - intel: + Mark the driver as "dangerous" in Kconfig + Fix atomic sequence handling + Pass a 40us delay (instead of 0us) to readl_poll_timeout() - fsl: + fix a typo in a function name + add support for IP variants embedded in the ls2080a and ls1080a SoCs - stm32: request exclusive control of the reset line" * tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd: (66 commits) mtd: nand: Pass mode information to nand_page_io_req mtd: cfi_cmdset_0002: Change erase one block to enable XIP once mtd: cfi_cmdset_0002: Change erase functions to check chip good only mtd: cfi_cmdset_0002: Change erase functions to retry for error mtd: cfi_cmdset_0002: Change definition naming to retry write operation mtd: cfi_cmdset_0002: Change write buffer to check correct value mtd: cmdlinepart: Update comment for introduction of OFFSET_CONTINUOUS mtd: bcm47xxpart: add of_match_table with a new DT binding dt-bindings: mtd: document Broadcom's BCM47xx partitions mtd: spi-nor: Add support for EN25QH32 mtd: spi-nor: Add support for is25wp series chips mtd: spi-nor: Add Winbond w25q32jv support mtd: spi-nor: fsl-quadspi: add support for ls2080a/ls1080a mtd: spi-nor: stm32-quadspi: explicitly request exclusive reset control mtd: spi-nor: intel: provide a range for poll_timout mtd: spi-nor: fsl-quadspi: fix api naming typo _init_ahb_read mtd: spi-nor: intel-spi: Explicitly mark the driver as dangerous in Kconfig mtd: spi-nor: intel-spi: Fix atomic sequence handling mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES op mtd: rawnand: use bit-wise majority to recover the ONFI param page ...
2018-05-22mtd: devices: m25p80: Use spi_mem_set_drvdata() instead of spi_set_drvdata()Boris Brezillon1-1/+1
SPI mem drivers should use spi_mem_set_drvdata() not spi_set_drvdata() to store their private data. Using spi_set_drvdata() will mess the spi -> spi-mem link up and cause a kernel panic at shutdown or device removal time. Fixes: 4120f8d158ef ("mtd: spi-nor: Use the spi_mem_xx() API") Reported-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Marek Vasut <marek.vasut+renesas@gmail.com> on R8A7791 Porter Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-11mtd: spi-nor: Use the spi_mem_xx() APIBoris Brezillon2-157/+80
The spi_mem_xxx() API has been introduced to replace the spi_flash_read() one. Make use of it so we can get rid of spi_flash_read(). Note that using spi_mem_xx() also simplifies the code because this API takes care of using the regular spi_sync() interface when the optimized ->mem_ops interface is not implemented by the controller. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@exceet.de> Tested-by: Frieder Schrempf <frieder.schrempf@exceet.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-22mtd: dataflash: replace msleep with usleep_rangeLuca Ellero1-1/+1
Since msleep is based on jiffies, this 3 ms sleep becomes actually 20 ms. Worst of all, since this sleep is used in a loop when writing, a single page write (256 to 1024 bytes) causes 17 ms extra time. When writing large files (for example u-boot is usually 512 KB) this delay adds up to minutes. See Documentation/timers/timers-howto.txt "Why not msleep for (1ms - 20ms)". Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-04-22mtd: devices: simplify getting .drvdataWolfram Sang1-2/+1
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-21mtd: Stop updating erase_info->state and calling mtd_erase_callback()Boris Brezillon13-75/+8
MTD users are no longer checking erase_info->state to determine if the erase operation failed or succeeded. Moreover, mtd_erase_callback() is now a NOP. We can safely get rid of all mtd_erase_callback() calls and all erase_info->state assignments. While at it, get rid of the erase_info->state field, all MTD_ERASE_XXX definitions and the mtd_erase_callback() function. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Bert Kenward <bkenward@solarflare.com> --- Changes in v2: - Address a few coding style issues (reported by Miquel) - Remove comments that are no longer valid (reported by Miquel)
2018-03-15mtd: Stop assuming mtd_erase() is asynchronousBoris Brezillon1-3/+0
None of the mtd->_erase() implementations work in an asynchronous manner, so let's simplify MTD users that call mtd_erase(). All they need to do is check the value returned by mtd_erase() and assume that != 0 means failure. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at>
2018-03-15mtd: st_spi_fsm: use %*ph to print small bufferAntonio Cardace1-2/+1
Use %*ph format to print small buffer as hex string. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Antonio Cardace <anto.cardace@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-15mtd: block2mtd: remove redundant initialization of 'bdev'Colin Ian King1-1/+1
Pointer bdev is being initialized however this value is never read as bdev is assigned an updated value from the returned call to blkdev_get_by_path. Remove the redundant assignment. Cleans up clang warning: drivers/mtd/devices/block2mtd.c:228:23: warning: Value stored to 'bdev' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-01-29Merge tag 'spi-nor/for-4.16' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon1-0/+9
Pull spi-nor changes from Cyrille Pitchen: " This pull-request contains the following notable changes: Core changes: * Add support to new ISSI and Cypress/Spansion memory parts. * Fix support of Micron memories by checking error bits in the FSR. * Fix update of block-protection bits by reading back the SR. * Restore the internal state of the SPI flash memory when removing the device. Driver changes: * Maintenance for Freescale, Intel and Metiatek drivers. * Add support of the direct access mode for the Cadence QSPI controller. "
2018-01-16mtd: Remove duplicate checks on mtd_oob_ops parameterBoris Brezillon1-5/+0
Some of the check done in custom ->_read/write_oob() implementation are already done by the core (in mtd_check_oob_ops()). Suggested-by: Peter Pan <peterpansjtu@gmail.com> [Remove redundant checks done in mtdpart.c] Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Ladislav Michl <ladis@linux-mips.org>
2018-01-16mtd: Fallback to ->_read/write_oob() when ->_read/write() is missingBoris Brezillon1-65/+0
Some MTD sublayers/drivers are implementing ->_read/write_oob() and provide dummy wrappers for their ->_read/write() implementations. Let the core handle this case instead of duplicating the logic. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Miquel Raynal <miquel.raynal@free-electrons.com> Tested-by: Ladislav Michl <ladis@linux-mips.org>
2017-12-17mtd: mchp23k256: propagate return value of spi_sync()Antonio Borneo1-4/+14
The call to spi_sync() can fail. Check the return value and propagate it. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>