summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/fsmc_nand.c
AgeCommit message (Collapse)AuthorFilesLines
2017-08-13mtd: nand: Rename nand.h into rawnand.hBoris Brezillon1-1/+1
We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Peter Pan <peterpandong@micron.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Wenyou Yang <wenyou.yang@microchip.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Han Xu <han.xu@nxp.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2017-06-01mtd: nand: Pass the CS line to ->setup_data_interface()Boris Brezillon1-4/+3
Some NAND controllers can assign different NAND timings to different CS lines. Pass the CS line information to ->setup_data_interface() so that the NAND controller driver knows which CS line is concerned by the setup_data_interface() request. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-06-01mtd: nand: fsmc_nand: handle on-die ECC caseThomas Petazzoni1-0/+3
This commit adjusts the fsmc_nand driver so that it accepts the NAND_ECC_ON_DIE case. It simply does nothing in this case, since both the ECC operations and OOB layout will be defined by the NAND chip code rather than by the NAND controller code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-05-15mtd: nand: fsmc: remove default timingsThomas Petazzoni1-15/+1
When timings are no longer provided by the Device Tree, we now use the SDR timings specified by the NAND flash, and such SDR timings are always provided. Therefore, it is no longer necessary to keep "default" timings in the fmsc driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-05-15mtd: nand: fsmc: add support for SDR timingsThomas Petazzoni1-5/+89
Until now, the fsmc_nand driver was either using controller timings specified in the Device Tree (through FSMC specific DT properties) or alternatively default/fallback timings. This commit implements support to use the timings advertised by the NAND chip itself, by implementing the ->setup_data_interface() hook. To preserve backward compatibility, if timings are specified in the Device Tree, we use the timings from the Device Tree (and don't implement ->setup_data_interface). Many thanks to Boris Brezillon for coming up with the logic to convert the NAND chip timings into the timings expected by the FSMC controller. Also, since the timings are now not only coming from the DT, the message warning that default timings will be used is removed. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-05-15mtd: nand: fsmc: reduce number of arguments of fsmc_nand_setup()Thomas Petazzoni1-10/+8
In preparation for the introduction of support for using SDR timings exposed by the NAND flash instead of hard-coded timings, this commit reworks the fsmc_nand_setup() function to take a "struct fsmc_nand_data" as argument, which already contains the I/O registers base address, bank and bus width information. The timings is also currently contained in the "struct fsmc_nand_data", but we still pass it as a separate argument because the support for using SDR timings will pass a different value. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-23mtd: nand: fsmc: remove CONFIG_OF conditionalThomas Petazzoni1-3/+1
Since commit 4404d7d821c33 ("mtd: nand: fsmc: remove stale non-DT probe path"), the fsmc NAND driver only supports Device Tree probing, and therefore has a "depends on OF" in its Kconfig option. Due to this the #ifdef CONFIG_OF ... #endif condition in the driver code is no longer necessary. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-23mtd: nand: fsmc: remove unused definitionsThomas Petazzoni1-9/+0
These definitions are not used anywhere in the driver, so remove them. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-23mtd: nand: fsmc: use devm_clk_get()Thomas Petazzoni1-5/+2
This commit switches the fsmc_nand driver from clk_get() to devm_clk_get(), which saves a few clk_put(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-23mtd: nand: fsmc: finally remove fsmc_nand_platform_dataThomas Petazzoni1-52/+21
Since the driver now only supports DT probing, it doesn't make a lot of sense to have a private data structure called platform_data, fill it in with information coming from the DT, and then copying this into the driver-specific structure fsmc_nand_data. So instead, we remove fsmc_nand_platform_data entirely, and have fsmc_nand_probe_config_dt() fill in the fsmc_nand_data structure directly. This requires calling fsmc_nand_probe_config_dt() after fsmc_nand_data has been allocated instead of before. Also, as an added bonus, we now propagate properly the return value of fsmc_nand_probe_config_dt() instead of returning -ENODEV on failure. The error message is also removed, since it no longer made any sense. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-23mtd: nand: fsmc: remove duplicate nand_set_flash_node()Thomas Petazzoni1-1/+0
It is already done a few lines before. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-23mtd: nand: fsmc: kill {nr_, }partitions structure fieldsThomas Petazzoni1-17/+1
The ->partitions and ->nr_partitions fields of struct fsmc_nand_platform_data are never set anywhere, so they are always NULL/0. The corresponding fields in 'struct fsmc_nand_data' are set to the value of the same fields in fsmc_nand_platform_data, i.e NULL/0. Therefore, we remove those two fields, and pass NULL/0 directly to mtd_device_register(), like many other NAND drivers already do. At the same time, we remove the comment about the fact that we pass partition info, since we are no longer doing this. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-23mtd: nand: fmsc: kill {read, write}_dma_priv from fsmc_nand_platform_dataThomas Petazzoni1-8/+2
The read_dma_priv and write_dma_priv fields of fsmc_nand_platform_data are never set, so this commit removes them. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-23mtd: nand: fsmc: remove fsmc_select_chip()Thomas Petazzoni1-29/+0
host->select_chip used to point to the ->select_bank() function provided by the platform data, but the latter no longer exists. Therefore host->select_chip is always NULL. Due to this, the fsmc_select_chip() does nothing, except: chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE); when chipnr is -1, which is exactly what the default implementation of ->select_chip() does in the NAND framework. So, this commit kills fsmc_select_chip() entirely. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-23mtd: nand: fsmc: remove ->select_bank() from fsmc_nand_platform_dataThomas Petazzoni1-4/+0
Since commit 4404d7d821c3 ("mtd: nand: fsmc: remove stale non-DT probe path"), only DT probing is used for the fsmc_nand driver. Due to this, the ->select_bank() field of fsmc_nand_platform_data is never used, so this commit gets rid of it. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-23mtd: nand: fsmc: move fsmc_nand_data definitionThomas Petazzoni1-49/+49
This commit simply moves the "struct fsmc_nand_data" definition to be towards the beginning of the file, with the other defines and type definitions, instead of in the middle of the driver code. This is much more consistent with what most Linux drivers do. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-23mtd: nand: fsmc: fix NAND width handlingThomas Petazzoni1-8/+5
In commit eea628199d5b ("mtd: Add device-tree support to fsmc_nand"), Device Tree support was added to the fmsc_nand driver. However, this code has a bug in how it handles the bank-width DT property to set the bus width. Indeed, in the function fsmc_nand_probe_config_dt() that parses the Device Tree, it sets pdata->width to either 8 or 16 depending on the value of the bank-width DT property. Then, the ->probe() function will test if pdata->width is equal to FSMC_NAND_BW16 (which is 2) to set NAND_BUSWIDTH_16 in nand->options. Therefore, with the DT probing, this condition will never match. This commit fixes that by removing the "width" field from fsmc_nand_platform_data and instead have the fsmc_nand_probe_config_dt() function directly set the appropriate nand->options value. It is worth mentioning that if this commit gets backported to older kernels, prior to the drop of non-DT probing, then non-DT probing will be broken because nand->options will no longer be set to NAND_BUSWIDTH_16. Fixes: eea628199d5b ("mtd: Add device-tree support to fsmc_nand") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-01-30mtd: nand: fsmc: remove stale non-DT probe pathLinus Walleij1-21/+132
The FSMC driver has an execution path and a header file in <linux/mtd/fsmc.h> that serves to support passing in platform data through board files, albeit no upstream users of this mechanism exist. The header file also contains function headers for functions that do not exist in the kernel. Delete this and move the platform data struct, parsing and handling into the driver, assume we are using OF and make the driver depend on OF, remove the ifdefs making that optional. Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Stefan Roese <sr@denx.de> Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-11-07mtd: nand: fsmc: return error code of nand_scan_ident/tail() on errorMasahiro Yamada1-5/+4
The nand_scan_ident/tail() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-05-06mtd: mtd: drop NAND_ECC_SOFT_BCH enum valueRafał Miłecki1-2/+1
This value should not be part of nand_ecc_modes_t as it specifies algorithm not a mode. We successfully managed to introduce new "algo" field which is respected now. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-05-06mtd: nand: fsmc: validate ECC setup by checking algorithm directlyRafał Miłecki1-2/+5
NAND core sets ECC algorithm in algo field now and it should be preferred over the mode field. This also prepares driver for dropping NAND_ECC_SOFT_BCH. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-05-06mtd: nand: fsmc: get rid of the fsmc_nand_eccplace structBoris Brezillon1-45/+15
Now that mtd_ooblayout_ecc() returns the ECC byte position using the OOB free method, we can get rid of the fsmc_nand_eccplace struct. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-05-06mtd: nand: fsmc: switch to mtd_ooblayout_opsBoris Brezillon1-216/+82
Implementing the mtd_ooblayout_ops interface is the new way of exposing ECC/OOB layout to MTD users. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-01-07mtd: nand: make use of nand_set/get_controller_data() helpersBoris BREZILLON1-1/+1
New helpers have been added to avoid directly accessing chip->field. Use them where appropriate. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Brian: fixed a few rebase conflicts] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-19mtd: nand: remove useless mtd->priv = chip assignmentsBoris BREZILLON1-1/+0
mtd_to_nand() now uses the container_of() approach to transform an mtd_info pointer into a nand_chip one. Drop useless mtd->priv assignments from NAND controller drivers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-18mtd: nand: fsmc: use the mtd instance embedded in struct nand_chipBoris BREZILLON1-12/+10
struct nand_chip now embeds an mtd device. Make use of this mtd instance. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-18mtd: nand: fsmc: create and use mtd_to_fsmc()Boris BREZILLON1-17/+14
Create and use mtd_to_fsmc() to avoid duplication of container_of(mtd, struct fsmc_nand_data, mtd) calls. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-08mtd: nand: make use of mtd_to_nand() in NAND driversBoris BREZILLON1-5/+5
mtd_to_nand() was recently introduced to avoid direct accesses to the mtd->priv field. Update all NAND drivers to use it. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-11-12mtd: nand: drop unnecessary partition parser dataBrian Norris1-4/+3
All of these drivers set up a parser data struct just to communicate DT partition data. This field has been deprecated and is instead supported by telling nand_scan_ident() about the 'flash_node'. This patch: * sets chip->flash_node for those drivers that didn't already (but used OF partitioning) * drops the parser data * switches to the simpler mtd_device_register() where possible, now that we've eliminated one of the auxiliary parameters Now that we've assigned chip->flash_node for these drivers, we can probably rely on nand_dt_init() to do more of the DT parsing for us, but for now, I don't want to fiddle with each of these drivers. The parsing is done in duplicate for now on some drivers. I don't think this should break things. (Famous last words.) (Rolled in some changes by Boris Brezillon) Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2015-11-12mtd: nand: convert to nand_set_flash_node()Brian Norris1-1/+1
Used semantic patch with 'make coccicheck MODE=patch COCCI=script.cocci': ---8<---- virtual patch @@ struct nand_chip *c; struct device_node *d; @@ -(c)->flash_node = (d) +nand_set_flash_node(c, d) ---8<---- Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2015-10-26mtd: fsmc_nand: Add BCH4 SW ECC support for SPEAr600Stefan Roese1-16/+41
This patch adds support for 4-bit ECC BCH4 for the SPEAr600 SoC. This can be used by boards equipped with a NAND chip that requires 4-bit ECC strength. The SPEAr600 HW ECC only supports 1-bit ECC strength. To enable SW BCH4, you need to specify this in your nand controller DT node: nand-ecc-mode = "soft_bch"; nand-ecc-strength = <4>; nand-ecc-step-size = <512>; Tested on a custom SPEAr600 board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> [Brian: tweaked the comments a bit] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: fsmc_nand: show parent device in sysfsFrans Klaver1-1/+1
Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-02mtd: nand: fsmc: Remove BUG macrosStefan Roese1-3/+5
Remove the BUG macros and return with error (if possible) instead. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-02mtd: nand: fsmc: Small whitespace cleanupStefan Roese1-1/+1
Remove tab in empty line. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-07mtd: fsmc_nand: match wait_for_completion_timeout return typeNicholas Mc Guire1-2/+3
return type of wait_for_completion_timeout is unsigned long not int. An appropriately named unsigned long is added and the assignment fixed up. This not only should help readability but also handles corner cases properly. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-07mtd: fsmc_nand: fix handling of wait_for_completion_timeout return valueNicholas Mc Guire1-3/+2
wait_for_completion_timeout does not return negative values so result handling here does not need to check for negative return. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-31mtd: fsmc_nand.c: Use default timings if none are provided in the dtsStefan Roese1-1/+6
Without this patch the timings are all set to 0 if not specified in the dts. With this patch the driver falls back to use the defaults that are already present in the driver and are known to work okay for some (older) boards. Tested on a custom SPEAr600 based board. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-20mtd: nand: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-15mtd: fsmc_nand: use dmaengine_terminate_all() APIVinod Koul1-1/+1
The drivers should use dmaengine_terminate_all() API instead of accessing the device_control which will be deprecated soon Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-07mtd: fsmc_nand: use dev_warn() instead of printk()Jingoo Han1-4/+4
Use dev_warn() instead of printk() to provide a better message to userspace. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-07mtd: fsmc_nand: Remove unnecessary OOM messagesJingoo Han1-6/+2
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-14dmaengine: remove DMA unmap flagsBartlomiej Zolnierkiewicz1-2/+0
Remove no longer needed DMA unmap flags: - DMA_COMPL_SKIP_SRC_UNMAP - DMA_COMPL_SKIP_DEST_UNMAP - DMA_COMPL_SRC_UNMAP_SINGLE - DMA_COMPL_DEST_UNMAP_SINGLE Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jon Mason <jon.mason@intel.com> Acked-by: Mark Brown <broonie@linaro.org> [djbw: clean up straggling skip unmap flags in ntb] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-08-31mtd: fsmc_nand: simplify platform_get_resource_byname/devm_ioremap_resourceJulia Lawall1-12/+0
Remove unneeded error handling on the result of a call to platform_get_resource_byname when the value is passed to devm_ioremap_resource. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,e,e1; expression ret != 0; identifier l; @@ res = platform_get_resource_byname(...); - if (res == NULL) { ... \(goto l;\|return ret;\) } e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-05mtd: nand: fsmc_nand: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-05mtd: nand: fsmc: update of OF supportMian Yousaf Kaukab1-0/+18
Add nand bank selection and timings to the device tree bindings. Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> [Added some documentation] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-05mtd: fsmc_nand: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han1-4/+2
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. Also, unnecessary CONFIG_PM ifdefs are removed. drivers/mtd/nand/fsmc_nand.c:1194:12: warning: 'fsmc_nand_suspend' defined but not used [-Wunused-function] drivers/mtd/nand/fsmc_nand.c:1202:12: warning: 'fsmc_nand_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: fsmc_nand: use module_platform_driver_probe()Jingoo Han1-12/+1
This patch uses module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-02-26Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-8/+14
Pull slave-dmaengine updates from Vinod Koul: "This is fairly big pull by my standards as I had missed last merge window. So we have the support for device tree for slave-dmaengine, large updates to dw_dmac driver from Andy for reusing on different architectures. Along with this we have fixes on bunch of the drivers" Fix up trivial conflicts, usually due to #include line movement next to each other. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (111 commits) Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT" ARM: dts: pl330: Add #dma-cells for generic dma binding support DMA: PL330: Register the DMA controller with the generic DMA helpers DMA: PL330: Add xlate function DMA: PL330: Add new pl330 filter for DT case. dma: tegra20-apb-dma: remove unnecessary assignment edma: do not waste memory for dma_mask dma: coh901318: set residue only if dma is in progress dma: coh901318: avoid unbalanced locking dmaengine.h: remove redundant else keyword dma: of-dma: protect list write operation by spin_lock dmaengine: ste_dma40: do not remove descriptors for cyclic transfers dma: of-dma.c: fix memory leakage dw_dmac: apply default dma_mask if needed dmaengine: ioat - fix spare sparse complain dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.c ioatdma: fix race between updating ioat->head and IOAT_COMPLETION_PENDING dw_dmac: add support for Lynxpoint DMA controllers dw_dmac: return proper residue value dw_dmac: fill individual length of descriptor ...
2013-02-22Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+1
Pull ARM SoC device tree conversions from Arnd Bergmann: "These are device tree conversions for a number of platforms, with the intention of turning code from board files into device tree descriptions. Notable changes are: - davinci bindings for pinctrl, MTD, RTC, watchdog and i2c - nomadik bindings for all devices, removing the board files - bcm2835 bindings for mmc and i2c - tegra bindings for hdmi, keyboard, audio, as well as some updates - at91 bindings for hardware ecc and for devices on RM9200 - mxs bindings for cfa100xx - sunxi support for Miniand Hackberry board" * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (72 commits) Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree" Revert "sunxi: a13-olinuxino: Add user LED to the device tree" clk: tegra: initialise parent of uart clocks ARM: tegra: remove clock-frequency properties from serial nodes clk: tegra: fix driver to match DT binding clk: tegra: local arrays should be static clk: tegra: Add missing spinlock for hclk and pclk clk: tegra: Implement locking for super clock clk: tegra: fix wrong clock index between se to sata_cold sunxi: a13-olinuxino: Add user LED to the device tree ARM: davinci: da850 DT: add support for machine reboot ARM: davinci: da850: add wdt DT node ARM: davinci: da850: add DT node for I2C0 ARM: at91: at91sam9n12: add DT parameters to enable PMECC ARM: at91: at91sam9x5: add DT parameters to enable PMECC ARM: at91: add EMAC bindings to RM9200 DT ARM: at91: add SSC bindings to RM9200 DT ARM: at91: add MMC bindings to RM9200 DT ARM: at91: Animeo IP: enable watchdog support ARM: nomadik: fix OF compilation regression ...
2013-01-29ARM: nomadik: add FSMC NANDLinus Walleij1-0/+1
This adds the FSMC NAND driver and flash partitions to the Nomadik device tree. The only compatible string accepted by this driver is currently "st,spear600-fsmc-nand" which is inappropriate for this system, so this patch adds the compatible value "stericsson,fsmc-nand" as well. Cc: linux-mtd@vger.kernel.org Cc: David Woodhouse <dwmw2@infradead.org> Cc: Artem Bityutskiy <dedekind1@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-19 11:38:52 +0300