summaryrefslogtreecommitdiff
path: root/drivers/mtd/spi-nor/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2023-09-19mtd: spi-nor: remove Fujitsu MB85RS1MT supportMichael Walle1-1/+0
This part is not a flash but an EEPROM like FRAM. It is even has a DT binding for the (correct) driver (at25), see Documentation/devicetree/bindings/eeprom/at25.yaml. Just remove it. Signed-off-by: Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20230807-mtd-flash-info-db-rework-v3-2-e60548861b10@kernel.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-09-19mtd: spi-nor: remove catalyst 'flashes'Michael Walle1-1/+0
CAT25xx are actually EEPROMs manufactured by Catalyst. The devices are ancient (DS are from 1998), there are not in-tree users, nor are there any device tree bindings. Remove it. The correct driver is the at25. Signed-off-by: Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20230807-mtd-flash-info-db-rework-v3-1-e60548861b10@kernel.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2022-05-09mtd: spi-nor: expose internal parameters via debugfsMichael Walle1-0/+1
There is no way to gather all information to verify support for a new flash chip. Also if you want to convert an existing flash chip to the new SFDP parsing, there is not enough information to determine if the flash will work like before. To ease this development, expose internal parameters via the debugfs. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220429102018.2361038-2-michael@walle.cc
2021-06-15mtd: spi-nor: add initial sysfs supportMichael Walle1-1/+1
Add support to show the manufacturer, the partname and JEDEC identifier as well as to dump the SFDP table. Not all flashes list their SFDP table contents in their datasheet. So having that is useful. It might also be helpful in bug reports from users. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
2021-04-02mtd: spi-nor: add OTP supportMichael Walle1-1/+1
SPI flashes sometimes have a special OTP area, which can (and is) used to store immutable properties like board serial number or vendor assigned network hardware addresses. The MTD subsystem already supports accessing such areas and some (non SPI NOR) flashes already implement support for it. It differentiates between user and factory areas. User areas can be written by the user and factory ones are pre-programmed and locked down by the vendor, usually containing an "electrical serial number". This patch will only add support for the user areas. Lay the foundation and implement the MTD callbacks for the SPI NOR and add necessary parameters to the flash_info structure. If a flash supports OTP it can be added by the convenience macro OTP_INFO(). Sometimes there are individual regions, which might have individual offsets. Therefore, it is possible to specify the starting address of the first regions as well as the distance between two regions (e.g. Winbond devices uses this method). Additionally, the regions might be locked down. Once locked, no further write access is possible. For SPI NOR flashes the OTP area is accessed like the normal memory, e.g. by offset addressing; except that you either have to use special read/write commands (Winbond) or you have to enter (and exit) a specific OTP mode (Macronix, Micron). Thus we introduce four operations to which the MTD callbacks will be mapped: .read(), .write(), .lock() and .is_locked(). The read and the write ops will be given an address offset to operate on while the locking ops use regions because locking always affects a whole region. It is up to the flash driver to implement these ops. Signed-off-by: Michael Walle <michael@walle.cc> [ta: use div64_u64(), IS_ALIGNED, params->otp.org. unsigned int region, drop comment, add rlen local variable in spi_nor_mtd_otp_lock()] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20210321235140.8308-2-michael@walle.cc
2021-03-31mtd: spi-nor: Move Software Write Protection logic out of the coreTudor Ambarus1-1/+1
It makes the core file a bit smaller and provides better separation between the Software Write Protection features and the core logic. All the next generic software write protection features (e.g. Individual Block Protection) will reside in swp.c. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Acked-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20210322075131.45093-2-tudor.ambarus@microchip.com
2020-04-09mtd: spi-nor: Compile files in controllers/ directoryGuenter Roeck1-0/+2
Commit a0900d0195d2 ("mtd: spi-nor: Prepare core / manufacturer code split") moved various files into a new directory, but did not add the new directory to its parent directory Makefile. The moved files no longer build, and affected flash chips no longer instantiate. Adding the new directory to the parent directory Makefile fixes the problem. Fixes: a0900d0195d2 ("mtd: spi-nor: Prepare core / manufacturer code split") Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-03-17mtd: spi-nor: Move XMC bits out of core.cBoris Brezillon1-0/+1
Create a SPI NOR manufacturer driver for XMC chips, and move the XMC definitions outside of core.c. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-03-17mtd: spi-nor: Move Xilinx bits out of core.cBoris Brezillon1-0/+1
Create a SPI NOR manufacturer driver for Xilinx chips, and move the Xilinx definitions outside of core.c. While at it, remove the SPI_S3AN flag which is now useless. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-03-17mtd: spi-nor: Move Catalyst bits out of core.cBoris Brezillon1-0/+1
Create a SPI NOR manufacturer driver for Catalyst chips, and move the Catalyst definitions outside of core.c. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-03-17mtd: spi-nor: Move Winbond bits out of core.cBoris Brezillon1-0/+1
Create a SPI NOR manufacturer driver for Winbond chips, and move the Winbond definitions outside of core.c. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-03-17mtd: spi-nor: Move SST bits out of core.cBoris Brezillon1-0/+1
Create a SPI NOR manufacturer driver for SST chips, and move the SST definitions outside of core.c. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-03-17mtd: spi-nor: Move Spansion bits out of core.cBoris Brezillon1-0/+1
Create a SPI NOR manufacturer driver for Spansion chips, and move the Spansion definitions outside of core.c. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-03-17mtd: spi-nor: Move Micron/ST bits out of core.cBoris Brezillon1-0/+1
Create a SPI NOR manufacturer driver for Micron/ST chips, and move the Micron/ST definitions outside of core.c. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-03-17mtd: spi-nor: Move Macronix bits out of core.cBoris Brezillon1-0/+1
Create a SPI NOR manufacturer driver for Macronix chips, and move the Macronix definitions outside of core.c. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
2020-03-17mtd: spi-nor: Move ISSI bits out of core.cBoris Brezillon1-0/+1
Create a SPI NOR manufacturer driver for ISSI chips, and move the ISSI definitions outside of core.c. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-03-17mtd: spi-nor: Move Intel bits out of core.cBoris Brezillon1-0/+1
Create a SPI NOR manufacturer driver for Intel chips, and move the Intel definitions outside of core.c. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-03-17mtd: spi-nor: Move GigaDevice bits out of core.cBoris Brezillon1-0/+1
Create a SPI NOR manufacturer driver for GigaDevice chips, and move the GigaDevice definitions outside of core.c. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-03-17mtd: spi-nor: Move Fujitsu bits out of core.cBoris Brezillon1-0/+1
Create a SPI NOR manufacturer driver for Fujitsu chips, and move the Fujitsu definitions outside of core.c. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-03-17mtd: spi-nor: Move Everspin bits out of core.cBoris Brezillon1-0/+1
Create a SPI NOR manufacturer driver for Everspin chips, and move the Everspin definitions outside of core.c. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-03-17mtd: spi-nor: Move ESMT bits out of core.cBoris Brezillon1-0/+1
Create a SPI NOR manufacturer driver for ESMT chips, and move the ESMT definitions outside of core.c. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-03-17mtd: spi-nor: Move Eon bits out of core.cBoris Brezillon1-0/+1
Create a SPI NOR manufacturer driver for Eon chips, and move the Eon definitions outside of core.c. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-03-17mtd: spi-nor: Move Atmel bits out of core.cBoris Brezillon1-0/+1
Create a SPI NOR manufacturer driver for Atmel chips, and move the Atmel definitions outside of core.c. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-03-16mtd: spi-nor: Move SFDP logic out of the coreTudor Ambarus1-1/+1
It makes the core file a bit smaller and provides better separation between the SFDP parsing and core logic. Keep the core.h and sfdp.h definitions private in drivers/mtd/spi-nor/. Both expose just the definitions that are required by the core and manufacturer drivers. None of the SPI NOR controller drivers should include them. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-03-16mtd: spi-nor: Prepare core / manufacturer code splitBoris Brezillon1-7/+2
Move all SPI NOR controller drivers to a controllers/ sub-directory so that we only have SPI NOR related source files under drivers/mtd/spi-nor/. Rename spi-nor.c into core.c, we are about to split this file in multiple source files (one per manufacturer, plus one for the SFDP parsing logic). Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-03-11mtd: spi-nor: remove mtk-quadspi driverChuanhong Guo1-1/+0
This driver is superseded by the new spi-mtk-nor driver. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Acked-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20200306085052.28258-5-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-07mtd: spi-nor: stm32: remove the driver as it was replaced by spi-stm32-qspi.cLudovic Barre1-1/+0
There's a new driver using the SPI memory interface of the SPI framework at spi/spi-stm32-qspi.c, which can be used together with m25p80.c to replace the functionality of this SPI NOR driver. The "new" driver uses the same dt properties and not affects the legacy compatibility. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-03-05Merge tag 'spi-v5.1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A fairly quiet release for SPI, the biggest thing is the conversion to use GPIO descriptors which is now 90% done but still needs some stragglers converting. Summary: - Support for inter-word delays - Conversion of the core and most drivers to use GPIO descriptors for GPIO controlled chip selects - New drivers for NXP FlexSPI and QuadSPI, SiFive and Spreadtrum" * tag 'spi-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (104 commits) spi: sh-msiof: Restrict bits per word to 8/16/24/32 on R-Car Gen2/3 spi: sifive: Remove redundant dev_err call in sifive_spi_probe() spi: sifive: Remove spi_master_put in sifive_spi_remove() spi: spi-gpio: fix SPI_CS_HIGH capability spi: pxa2xx: Setup maximum supported DMA transfer length spi: sifive: Add driver for the SiFive SPI controller spi: sifive: Add DT documentation for SiFive SPI controller spi: sprd: Add a prefix for SPI DMA channel macros spi: sprd: spi: sprd: Add DMA mode support dt-bindings: spi: Add the DMA properties for the SPI dma mode spi: sprd: Add the SPI irq function for the SPI DMA mode dt-bindings: spi: imx: Add an entry for the i.MX8QM compatible spi: use gpio[d]_set_value_cansleep for setting chipselect GPIO spi: gpio: Advertise support for SPI_CS_HIGH spi: sh-msiof: Replace spi_master by spi_controller spi: sh-hspi: Replace spi_master by spi_controller spi: rspi: Replace spi_master by spi_controller spi: atmel-quadspi: add support for sam9x60 qspi controller dt-bindings: spi: atmel-quadspi: QuadSPI driver for Microchip SAM9X60 spi: atmel-quadspi: add support for named peripheral clock ...
2019-01-16mtd: spi-nor: mtk-quadspi: rename config to a common oneRyder Lee1-1/+1
The quadspi is a generic communication interface which could be shared with other MediaTek SoCs. Hence rename it to a common one. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-01-07spi: Add a driver for the Freescale/NXP QuadSPI controllerFrieder Schrempf1-1/+0
This driver is derived from the SPI NOR driver at mtd/spi-nor/fsl-quadspi.c. It uses the new SPI memory interface of the SPI framework to issue flash memory operations to up to four connected flash chips (2 buses with 2 CS each). The controller does not support generic SPI messages. This patch also disables the build of the "old" driver and reuses its Kconfig option CONFIG_SPI_FSL_QUADSPI to replace it. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Han Xu <han.xu@nxp.com> Reviewed-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Tested-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Tested-by: Han Xu <han.xu@nxp.com> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-07spi: Add QuadSPI driver for Atmel SAMA5D2Piotr Bugalski1-1/+0
Kernel contains QSPI driver strongly tied to MTD and nor-flash memory. New spi-mem interface allows usage also other memory types, especially much larger NAND with SPI interface. This driver works as SPI controller and is not related to MTD, however can work with NAND-flash or other peripherals using spi-mem interface. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Piotr Bugalski <bugalski.piotr@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-14mtd: spi-nor: fix "No newline at end of file"Matthew Gerlach1-1/+1
Add a newline to the end of drivers/spi-nor/Makefile to get rid the message, "No newline at end of file", produced by git. This fix will allow subsequent changes to the file to be able to produce clean patches. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2017-08-01mtd: spi-nor: intel-spi: Add support for Intel Denverton SPI serial flash ↵Mika Westerberg1-0/+1
controller Intel Denverton exposes the SPI serial flash controller as a PCI device instead of being part of the LPC chip as previous generations did. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
2017-05-01mtd: spi-nor: add driver for STM32 quad spi flash controllerLudovic Barre1-0/+1
The quadspi is a specialized communication interface targeting single, dual or quad SPI Flash memories. It can operate in any of the following modes: -indirect mode: all the operations are performed using the quadspi registers -read memory-mapped mode: the external Flash memory is mapped to the microcontroller address space and is seen by the system as if it was an internal memory Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10Merge tag 'ib-mfd-mtd-v4.11' of ↵Cyrille Pitchen1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd From Lee Jones: """ Immutable branch between MFD and MTD due for the v4.11 merge window """
2017-02-10mtd: spi-nor: add memory controllers for the Aspeed AST2500 SoCCédric Le Goater1-0/+1
This driver adds mtd support for the Aspeed AST2500 SoC static memory controllers : * Firmware SPI Memory Controller (FMC) . BMC firmware . 3 chip select pins (CE0 ~ CE2) . supports SPI type flash memory (CE0-CE1) . CE2 can be of NOR type flash but this is not supported by the driver * SPI Flash Controller (SPI1 and SPI2) . host firmware . 2 chip select pins (CE0 ~ CE1) . supports SPI type flash memory Each controller has a memory range on which it maps its flash module slaves. Each slave is assigned a memory window for its mapping that can be changed at bootime with the Segment Address Register. Each SPI flash slave can then be accessed in two modes: Command and User. When in User mode, accesses to the memory segment of the slaves are translated in SPI transfers. When in Command mode, the HW generates the SPI commands automatically and the memory segment is accessed as if doing a MMIO. Currently, only the User mode is supported. Command mode needs a little more work to check that the memory window on the AHB bus fits the module size. Based on previous work from Milton D. Miller II <miltonm@us.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-01-03spi-nor: Add support for Intel SPI serial flash controllerMika Westerberg1-0/+2
Add support for the SPI serial flash host controller found on many Intel CPUs including Baytrail and Braswell. The SPI serial flash controller is used to access BIOS and other platform specific information. By default the driver exposes a single read-only MTD device but with a module parameter "writeable=1" the MTD device can be made read-write which makes it possible to upgrade BIOS directly from Linux. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-07-18mtd: spi-nor: Add driver for Cadence Quad SPI Flash ControllerGraham Moore1-0/+1
Add support for the Cadence QSPI controller. This controller is present in the Altera SoCFPGA SoCs and this driver has been tested on the Cyclone V SoC. Signed-off-by: Graham Moore <grmoore@opensource.altera.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alan Tull <atull@opensource.altera.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Graham Moore <grmoore@opensource.altera.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Yves Vandervennet <yvanderv@opensource.altera.com> Cc: devicetree@vger.kernel.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-16mtd: atmel-quadspi: add driver for Atmel QSPI controllerCyrille Pitchen1-0/+1
This driver add support to the new Atmel QSPI controller embedded into sama5d2x SoCs. It expects a NOR memory to be connected to the QSPI controller. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-14mtd: spi-nor: add hisilicon spi-nor flash controller driverJiancheng Xue1-0/+1
Add hisilicon spi-nor flash controller driver Signed-off-by: Binquan Peng <pengbinquan@hisilicon.com> Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-11-21mtd: mtk-nor: new Mediatek serial flash controller driverBayi Cheng1-0/+1
Add spi nor flash driver for mediatek controller Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-08-14mtd: spi-nor: add driver for NXP SPI Flash Interface (SPIFI)Joachim Eastwood1-0/+1
Add SPI-NOR driver for the SPI Flash Interface (SPIFI) controller that is found on newer NXP MCU devices. The controller supports serial SPI Flash devices with 1-, 2- and 4-bit width in either SPI mode 0 or 3. The controller can operate in either command or memory mode. In memory mode the Flash is exposed as normal memory and can be directly accessed by the CPU. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14mtd: spi-nor: shorten Kconfig namingBrian Norris1-1/+1
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Huang Shijie <b32955@freescale.com>
2014-04-14mtd: spi-nor: Add Freescale QuadSPI driverHuang Shijie1-0/+1
(0) What is the QuadSPI controller? The QuadSPI(Quad Serial Peripheral Interface) acts as an interface to one single or two external serial flash devices, each with up to 4 bidirectional data lines. (1) The QuadSPI controller is driven by the LUT(Look-up Table) registers. The LUT registers are a look-up-table for sequences of instructions. A valid sequence consists of four LUT registers. (2) The definition of the LUT register shows below: --------------------------------------------------- | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 | --------------------------------------------------- There are several types of INSTRx, such as: CMD : the SPI NOR command. ADDR : the address for the SPI NOR command. DUMMY : the dummy cycles needed by the SPI NOR command. .... There are several types of PADx, such as: PAD1 : use a singe I/O line. PAD2 : use two I/O lines. PAD4 : use quad I/O lines. .... (3) Test this driver with the JFFS2 and UBIFS: For jffs2: ------------- #flash_eraseall /dev/mtd0 #mount -t jffs2 /dev/mtdblock0 tmp #bonnie++ -d tmp -u 0 -s 10 -r 5 For ubifs: ------------- #flash_eraseall /dev/mtd0 #ubiattach /dev/ubi_ctrl -m 0 #ubimkvol /dev/ubi0 -N test -m #mount -t ubifs ubi0:test tmp #bonnie++ -d tmp -u 0 -s 10 -r 5 Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14mtd: spi-nor: add the framework for SPI NORHuang Shijie1-0/+1
This patch cloned most of the m25p80.c. In theory, it adds a new spi-nor layer. Before this patch, the layer is like: MTD ------------------------ m25p80 ------------------------ spi bus driver ------------------------ SPI NOR chip After this patch, the layer is like: MTD ------------------------ spi-nor ------------------------ m25p80 ------------------------ spi bus driver ------------------------ SPI NOR chip With the spi-nor controller driver(Freescale Quadspi), it looks like: MTD ------------------------ spi-nor ------------------------ fsl-quadspi ------------------------ SPI NOR chip New APIs: spi_nor_scan: used to scan a spi-nor flash. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> [Brian: rebased to include additional m25p_ids[] entry] Signed-off-by: Brian Norris <computersforpeace@gmail.com>