summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)AuthorFilesLines
2015-07-01Merge tag 'modules-next-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Main excitement here is Peter Zijlstra's lockless rbtree optimization to speed module address lookup. He found some abusers of the module lock doing that too. A little bit of parameter work here too; including Dan Streetman's breaking up the big param mutex so writing a parameter can load another module (yeah, really). Unfortunately that broke the usual suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were appended too" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits) modules: only use mod->param_lock if CONFIG_MODULES param: fix module param locks when !CONFIG_SYSFS. rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE() module: add per-module param_lock module: make perm const params: suppress unused variable error, warn once just in case code changes. modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'. kernel/module.c: avoid ifdefs for sig_enforce declaration kernel/workqueue.c: remove ifdefs over wq_power_efficient kernel/params.c: export param_ops_bool_enable_only kernel/params.c: generalize bool_enable_only kernel/module.c: use generic module param operaters for sig_enforce kernel/params: constify struct kernel_param_ops uses sysfs: tightened sysfs permission checks module: Rework module_addr_{min,max} module: Use __module_address() for module_address_lookup() module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING module: Optimize __module_address() using a latched RB-tree rbtree: Implement generic latch_tree seqlock: Introduce raw_read_seqcount_latch() ...
2015-06-26Merge branch 'for-4.2/writeback' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+1
Pull cgroup writeback support from Jens Axboe: "This is the big pull request for adding cgroup writeback support. This code has been in development for a long time, and it has been simmering in for-next for a good chunk of this cycle too. This is one of those problems that has been talked about for at least half a decade, finally there's a solution and code to go with it. Also see last weeks writeup on LWN: http://lwn.net/Articles/648292/" * 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits) writeback, blkio: add documentation for cgroup writeback support vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB writeback: do foreign inode detection iff cgroup writeback is enabled v9fs: fix error handling in v9fs_session_init() bdi: fix wrong error return value in cgwb_create() buffer: remove unusued 'ret' variable writeback: disassociate inodes from dying bdi_writebacks writeback: implement foreign cgroup inode bdi_writeback switching writeback: add lockdep annotation to inode_to_wb() writeback: use unlocked_inode_to_wb transaction in inode_congested() writeback: implement unlocked_inode_to_wb transaction and use it for stat updates writeback: implement [locked_]inode_to_wb_and_lock_list() writeback: implement foreign cgroup inode detection writeback: make writeback_control track the inode being written back writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb() mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use writeback: implement memcg writeback domain based throttling writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes writeback: implement memcg wb_domain writeback: update wb_over_bg_thresh() to use wb_domain aware operations ...
2015-06-26Merge tag 'upstream-4.2-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds7-208/+145
Pull UBI/UBIFS updates from Richard Weinberger: "Minor fixes for UBI and UBIFS" * tag 'upstream-4.2-rc1' of git://git.infradead.org/linux-ubifs: UBI: Remove unnecessary `\' UBI: Use static class and attribute groups UBI: add a helper function for updatting on-flash layout volumes UBI: Fastmap: Do not add vol if it already exists UBI: Init vol->reserved_pebs by assignment UBI: Fastmap: Rename variables to make them meaningful UBI: Fastmap: Remove unnecessary `\' UBI: Fastmap: Use max() to get the larger value ubifs: fix to check error code of register_shrinker UBI: block: Dynamically allocate minor numbers
2015-06-24Merge tag 'powerpc-4.2-1' of ↵Linus Torvalds3-0/+294
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - disable the 32-bit vdso when building LE, so we can build with a 64-bit only toolchain. - EEH fixes from Gavin & Richard. - enable the sys_kcmp syscall from Laurent. - sysfs control for fastsleep workaround from Shreyas. - expose OPAL events as an irq chip by Alistair. - MSI ops moved to pci_controller_ops by Daniel. - fix for kernel to userspace backtraces for perf from Anton. - merge pseries and pseries_le defconfigs from Cyril. - CXL in-kernel API from Mikey. - OPAL prd driver from Jeremy. - fix for DSCR handling & tests from Anshuman. - Powernv flash mtd driver from Cyril. - dynamic DMA Window support on powernv from Alexey. - LLVM clang fixes & workarounds from Anton. - reworked version of the patch to abort syscalls when transactional. - fix the swap encoding to support 4TB, from Aneesh. - various fixes as usual. - Freescale updates from Scott: Highlights include more 8xx optimizations, an e6500 hugetlb optimization, QMan device tree nodes, t1024/t1023 support, and various fixes and cleanup. * tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (180 commits) cxl: Fix typo in debug print cxl: Add CXL_KERNEL_API config option powerpc/powernv: Fix wrong IOMMU table in pnv_ioda_setup_bus_dma() powerpc/mm: Change the swap encoding in pte. powerpc/mm: PTE_RPN_MAX is not used, remove the same powerpc/tm: Abort syscalls in active transactions powerpc/iommu/ioda2: Enable compile with IOV=on and IOMMU_API=off powerpc/include: Add opal-prd to installed uapi headers powerpc/powernv: fix construction of opal PRD messages powerpc/powernv: Increase opal-irqchip initcall priority powerpc: Make doorbell check preemption safe powerpc/powernv: pnv_init_idle_states() should only run on powernv macintosh/nvram: Remove as unused powerpc: Don't use gcc specific options on clang powerpc: Don't use -mno-strict-align on clang powerpc: Only use -mtraceback=no, -mno-string and -msoft-float if toolchain supports it powerpc: Only use -mabi=altivec if toolchain supports it powerpc: Fix duplicate const clang warning in user access code vfio: powerpc/spapr: Support Dynamic DMA windows vfio: powerpc/spapr: Register memory and define IOMMU v2 ...
2015-06-17mtd: docg3: Fix kasprintf() usageRichard Weinberger1-2/+8
kasprintf() does a dynamic memory allocation and can fail. We have to handle that case. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-06-17mtd: docg3: Don't leak docg3->bbt in error pathRichard Weinberger1-2/+4
Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-06-17mtd: nandsim: Fix kasprintf() usageRichard Weinberger1-0/+10
kasprintf() used in get_partition_name() does a dynamic memory allocation and can fail. We have to handle that case. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-06-17mtd: cs553x_nand: Fix kasprintf() usageRichard Weinberger1-3/+9
kasprintf() does a dynamic memory allocation and can fail. We have to handle that case. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-06-17mtd: r852: Fix device_create_file() usageRichard Weinberger1-1/+5
device_create_file() can fail, therefore we have to handle this case and abort. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-06-17mtd: brcmnand: drop unnecessary initializationBrian Norris1-1/+1
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-06-17mtd: propagate error codes from add_mtd_device()Brian Norris1-7/+11
It makes more sense to return error statuses, not 1/0. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Richard Weinberger <richard@nod.at>
2015-06-17mtd: diskonchip: remove two-phase partitioning / registrationBrian Norris1-8/+2
It is a Bad Idea (TM) to call mtd_device_register() or mtd_device_parse_register() twice on the same master MTD. Among other things, it makes partition overrides (e.g., cmdlinepart) much more difficult. Since commit 727dc612c46b ("mtd: part: Create the master device node when partitioned"), we now have a config option that accomplishes the same purpose as the double-registration done in diskonchip.c -- it forces the master MTD to *always* be registered, while partitions may optionally show up in addition. Eventually, we might like to make CONFIG_MTD_PARTITIONED_MASTER into the default, but this could be disruptive to user-space expectations of MTD numbering, so we'll take that slowly. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Alexander Shiyan <shc_work@mail.ru>
2015-06-11mtd: powernv: Add powernv flash MTD abstraction driverCyril Bur3-0/+294
Powerpc powernv platforms allow access to certain system flash devices through a firmwarwe interface. This change adds an mtd driver for these flash devices. Minor updates from Jeremy Kerr and Joel Stanley. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Reviewed-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-03UBI: Remove unnecessary `\'shengyong2-2/+2
Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02writeback: separate out include/linux/backing-dev-defs.hTejun Heo1-0/+1
With the planned cgroup writeback support, backing-dev related declarations will be more widely used across block and cgroup; unfortunately, including backing-dev.h from include/linux/blkdev.h makes cyclic include dependency quite likely. This patch separates out backing-dev-defs.h which only has the essential definitions and updates blkdev.h to include it. c files which need access to more backing-dev details now include backing-dev.h directly. This takes backing-dev.h off the common include dependency chain making it a lot easier to use it across block and cgroup. v2: fs/fat build failure fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02UBI: Use static class and attribute groupsTakashi Iwai3-142/+57
This patch cleans up the manual device_create_file() or class_create_file() calls by replacing with static attribute groups. It simplifies the code and also avoids the possible races between the device/class registration and sysfs creations. For the simplification, also make ubi_class a static instance with initializers, too. Amend a bit by Hujianyang. Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: hujianyang <hujianyang@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02UBI: add a helper function for updatting on-flash layout volumesshengyong1-21/+24
Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02UBI: Fastmap: Do not add vol if it already existsshengyong1-1/+8
During fastmap attaching, check if a volume already exists when adding the volume to volume tree. NOTE that the issue cannot happen, only if the on-flash fastmap data is modified. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02UBI: Init vol->reserved_pebs by assignmentshengyong1-2/+2
`vol' is a newly allocated value by kzalloc. Initialize it by assignment instead of `+='. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02UBI: Fastmap: Rename variables to make them meaningfulshengyong1-29/+29
s/fmpl1/fmpl s/fmpl2/fmpl_wl Add "WL" to the error message when wrong WL pool magic number is detected. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02UBI: Fastmap: Remove unnecessary `\'shengyong1-7/+7
Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02UBI: Fastmap: Use max() to get the larger valueshengyong1-2/+2
Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02UBI: block: Dynamically allocate minor numbersDan Ehrenberg1-2/+14
This patch makes ubiblock devices have minor numbers beginning from 0, allocated dynamically independently of the ubi device/volume number. This property becomes useful because, on 32-bit architectures with LFS turned off in a userspace program, device minor numbers over 8 bits cause stat to return -EOVERFLOW. If the device number is high (>1) due to multiple MTD partitions, such an overflow will occur. While enabling LFS is clearly a nicer solution, it's often difficult to turn on in practice globally as many widely distributed packages don't work with LFS on. Other storage systems have their own workarounds, with SCSI making multiple device majors and MMC having a config option for the number of partitions per device. A completely dynamic minor numbering is simpler than these. It is unlikely that anyone is depending on a static minor number since the major is dynamic anyway. In addition, ubiblock is still relatively new, so now is the time to make such changes. Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-05-28mtd: dc21285: use raw spinlock functions for nw_gpio_lockUwe Kleine-König1-2/+2
Since commit bd31b85960a7 (which is in 3.2-rc1) nw_gpio_lock is a raw spinlock that needs usage of the corresponding raw functions. This fixes: drivers/mtd/maps/dc21285.c: In function 'nw_en_write': drivers/mtd/maps/dc21285.c:41:340: warning: passing argument 1 of 'spinlock_check' from incompatible pointer type spin_lock_irqsave(&nw_gpio_lock, flags); In file included from include/linux/seqlock.h:35:0, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/mtd/maps/dc21285.c:8: include/linux/spinlock.h:299:102: note: expected 'struct spinlock_t *' but argument is of type 'struct raw_spinlock_t *' static inline raw_spinlock_t *spinlock_check(spinlock_t *lock) ^ drivers/mtd/maps/dc21285.c:43:25: warning: passing argument 1 of 'spin_unlock_irqrestore' from incompatible pointer type spin_unlock_irqrestore(&nw_gpio_lock, flags); ^ In file included from include/linux/seqlock.h:35:0, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/mtd/maps/dc21285.c:8: include/linux/spinlock.h:370:91: note: expected 'struct spinlock_t *' but argument is of type 'struct raw_spinlock_t *' static inline void spin_unlock_irqrestore(spinlock_t *lock, unsigned long flags) Fixes: bd31b85960a7 ("locking, ARM: Annotate low level hw locks as raw") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-28mtd: chips: fixup dependencies, to prevent build errorBrian Norris1-0/+1
Commit 4612c715a6ea ("mtd: cfi: deinline large functions") moved some code into the cfi_util library without creating a new dependency. So we can get build failures like the following, when CONFIG_MTD_JEDECPROBE=y and CONFIG_MTD_CFI_UTIL=m. drivers/built-in.o: In function `jedec_read_id': >> jedec_probe.c:(.text+0x187ed8): undefined reference to `cfi_build_cmd_addr' drivers/built-in.o: In function `jedec_read_mfr': >> jedec_probe.c:(.text+0x187f4a): undefined reference to `cfi_build_cmd_addr' drivers/built-in.o: In function `jedec_reset': >> jedec_probe.c:(.text+0x187fe0): undefined reference to `cfi_send_gen_cmd' >> jedec_probe.c:(.text+0x188004): undefined reference to `cfi_send_gen_cmd' >> jedec_probe.c:(.text+0x18802b): undefined reference to `cfi_send_gen_cmd' >> jedec_probe.c:(.text+0x18804e): undefined reference to `cfi_send_gen_cmd' drivers/built-in.o: In function `jedec_probe_chip': >> jedec_probe.c:(.text+0x188130): undefined reference to `cfi_build_cmd_addr' >> jedec_probe.c:(.text+0x18814d): undefined reference to `cfi_build_cmd_addr' >> jedec_probe.c:(.text+0x1881dc): undefined reference to `cfi_send_gen_cmd' >> jedec_probe.c:(.text+0x188203): undefined reference to `cfi_send_gen_cmd' >> jedec_probe.c:(.text+0x18822d): undefined reference to `cfi_send_gen_cmd' >> jedec_probe.c:(.text+0x1884c0): undefined reference to `cfi_send_gen_cmd' >> jedec_probe.c:(.text+0x1884e7): undefined reference to `cfi_send_gen_cmd' drivers/built-in.o:jedec_probe.c:(.text+0x188511): more undefined references to `cfi_send_gen_cmd' follow drivers/built-in.o: In function `jedec_probe_chip': >> jedec_probe.c:(.text+0x188618): undefined reference to `cfi_build_cmd' So let's express the dependency properly. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-28kernel/params: constify struct kernel_param_ops usesLuis R. Rodriguez1-1/+1
Most code already uses consts for the struct kernel_param_ops, sweep the kernel for the last offending stragglers. Other than include/linux/moduleparam.h and kernel/params.c all other changes were generated with the following Coccinelle SmPL patch. Merge conflicts between trees can be handled with Coccinelle. In the future git could get Coccinelle merge support to deal with patch --> fail --> grammar --> Coccinelle --> new patch conflicts automatically for us on patches where the grammar is available and the patch is of high confidence. Consider this a feature request. Test compiled on x86_64 against: * allnoconfig * allmodconfig * allyesconfig @ const_found @ identifier ops; @@ const struct kernel_param_ops ops = { }; @ const_not_found depends on !const_found @ identifier ops; @@ -struct kernel_param_ops ops = { +const struct kernel_param_ops ops = { }; Generated-by: Coccinelle SmPL Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Junio C Hamano <gitster@pobox.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: cocci@systeme.lip6.fr Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-27mtd: cfi_cmdset_0002: Initialize datum before calling map_word_load_partialChristian Riesch1-1/+1
In do_otp_write we must initialize the variable datum before calling map_word_load_partial. Otherwise the upper bits of datum may be undefined, which later causes problems in chip_good called by do_write_oneword. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-27mtd: cfi: deinline large functionsDenys Vlasenko1-0/+188
With this .config: http://busybox.net/~vda/kernel_config, after uninlining these functions have sizes and callsite counts as follows: cfi_udelay(): 74 bytes, 26 callsites cfi_send_gen_cmd(): 153 bytes, 95 callsites cfi_build_cmd(): 274 bytes, 123 callsites cfi_build_cmd_addr(): 49 bytes, 15 callsites cfi_merge_status(): 230 bytes, 3 callsites Reduction in code size is about 50,000: text data bss dec hex filename 85842882 22294584 20627456 128764922 7accbfa vmlinux.before 85789648 22294616 20627456 128711720 7abfc28 vmlinux Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: Dan Carpenter <dan.carpenter@oracle.com> CC: Jingoo Han <jg1.han@samsung.com> CC: Brian Norris <computersforpeace@gmail.com> CC: Aaron Sierra <asierra@xes-inc.com> CC: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> CC: David Woodhouse <David.Woodhouse@intel.com> CC: linux-mtd@lists.infradead.org CC: linux-kernel@vger.kernel.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-27mtd: lantiq-flash: use default partition parsersBrian Norris1-3/+1
The default implementation already probes for cmdlinepart and ofpart. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-27mtd: plat_nand: use default partition probeBrian Norris2-7/+1
It's harmless to add 'ofpart' (the only different parser supported in default mtdpart.c) to plat_nand. That let's us kill off one more custom partition prober listing. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-22mtd: nand: correct indentation within conditionalBrian Norris1-1/+1
We had an extra tab. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-22mtd: remove incorrect file nameBrian Norris5-10/+2
This is an example of why it doesn't make much sense to put this information here in the first place. I don't really know what purpose it serves. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-21mtd: blktrans: use better error code for unimplemented ioctl()Brian Norris1-1/+1
In commit 50183936254b ("mtd: blktrans: change blktrans_getgeo return value") we fixed the problem that ioctl(HDIO_GETGEO) might return 0 (success) for mtdblock devices which did not implement the feature and would leave a blank (zero) result. But now, let's get the error code right. Other code paths on this ioctl tend to use -ENOTTY to notify the user that the ioctl() is not supported for the device, so let's use that instead of -EOPNOTSUPP. Suggested-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-21mtd: maps: Spelling s/reseved/reserved/Geert Uytterhoeven3-3/+3
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-21mtd: blktrans: change blktrans_getgeo return valueWenlin Kang1-1/+1
Modify function blktrans_getgeo()'s return value to -EOPNOTSUPP when dev->tr->getgeo == NULL. We shouldn't make the return value to 0 when dev->tr->getgeo == NULL, because the function blktrans_getgeo() has an output value "hd_geometry" which is usually used by some application, if returns 0 (i.e., "success"), it will make some application get the wrong information. Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-21mtd: mxc_nand: generate nand_ecclayout for 8 bit ECCBaruch Siach1-1/+21
Hardware 8 bit ECC requires a different nand_ecclayout. Instead of adding yet another static struct nand_ecclayout, generate it in code. Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-21mtd: spi-nor: Properly set SECT_4K for recently added flashesRafał Miłecki1-3/+10
Few recently added entries are missing SECT_4K flag despite of these flashes supporting 4 KiB erase sectors and 0x20 erase command. Also add a comment to help avoiding such mistakes in the future. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Knut Wohlrab <knut.wohlrab@de.bosch.com> Cc: Huang Shijie <shijie.huang@intel.com> Cc: Shengzhou Liu <shengzhou.liu@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-21mtd: spi-nor: Add support for Spansion S25FL164KRafał Miłecki1-0/+1
It's an 8 MiB flash with 4 KiB erase sectors. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-21mtd: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven2-2/+2
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-21mtd: mxc_nand: fix truncate of unaligned oob copyingBaruch Siach1-4/+36
Copy to/from oob io area might not be aligned to 4 bytes. When 8 bit ECC is used, the buffer size is 26. Add memcpy16_{to,from}io, and use them to avoid truncating the buffer. Prefer memcpy32_{to,from}io when the buffer is properly aligned for better performance. Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-21mtd: mxc_nand: limit the size of used oobBaruch Siach1-3/+13
For 4k pages the i.MX NFC hardware uses no more than 218 bytes for 8bit ECC data. Larger oobsize confuses the logic of copy_spare(). Limit the size of used oob size to avoid that. Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-21mtd: mxc_nand: cleanup copy_spare functionUwe Kleine-König1-15/+31
To give people without the reference manual at hand a chance to understand how spare area is handled in the i.MX nand controller, improve commenting, naming of variables and coding style. No functional change intended. Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [baruch: declare oob_chunk_size; update comments; reword commit log] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-18mtd: brcmnand: do not make local variable staticHauke Mehrtens1-1/+1
Remove static in front of ctrl. This variable should not be shared between different instances of brcmnand_probe(), it should be local to this function and stored on the stack. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-18mtd: brcmnand: remove double new line from printHauke Mehrtens1-1/+1
The caller already adds a new line and in the other cases there is no new line added. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-18Merge tag 'v4.1-rc4' into MTD's -nextBrian Norris3-5/+9
2015-05-18Merge tag 'for-linus-20150516' of git://git.infradead.org/linux-mtdLinus Torvalds2-5/+7
Pull MTD fixes from Brian Norris: "Two MTD fixes for 4.1: - readtest: the signal-handling code was clobbering the error codes we should be handling/reporting in this test, rendering it useless. Noticed by Coverity. - the common SPI NOR flash DT binding (merged for 4.1-rc1) is being revised, so let's change that before 4.1 is minted" * tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd: Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor" mtd: readtest: don't clobber error reports
2015-05-15mtd: brcmnand: add BCM63138 supportBrian Norris2-0/+112
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com>
2015-05-15mtd: brcmnand: add support for Broadcom's IPROC familyBrian Norris2-0/+153
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-15mtd: brcmnand: add extra SoC support to libraryBrian Norris2-5/+71
There are a few small hooks required for chips like BCM63138 and the iProc family. Let's introduce those now. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com>
2015-05-15mtd: brcmnand: add support for STB chipsBrian Norris2-0/+45
BCM7xxx chips are supported entirely by the library code, since they use generic irqchip interfaces and don't need any extra SoC-specific configuration. Signed-off-by: Brian Norris <computersforpeace@gmail.com>