summaryrefslogtreecommitdiff
path: root/drivers/net/bonding
AgeCommit message (Collapse)AuthorFilesLines
2023-08-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+3
Cross-merge networking fixes after downstream PR. Conflicts: include/net/inet_sock.h f866fbc842de ("ipv4: fix data-races around inet->inet_id") c274af224269 ("inet: introduce inet->inet_flags") https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/ Adjacent changes: drivers/net/bonding/bond_alb.c e74216b8def3 ("bonding: fix macvlan over alb bond support") f11e5bd159b0 ("bonding: support balance-alb with openvswitch") drivers/net/ethernet/broadcom/bgmac.c d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()") 23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()") drivers/net/ethernet/broadcom/genet/bcmmii.c 32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()") acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()") net/sctp/socket.c f866fbc842de ("ipv4: fix data-races around inet->inet_id") b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-24bonding: fix macvlan over alb bond supportHangbin Liu1-3/+3
The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds") aims to enable the use of macvlans on top of rlb bond mode. However, the current rlb bond mode only handles ARP packets to update remote neighbor entries. This causes an issue when a macvlan is on top of the bond, and remote devices send packets to the macvlan using the bond's MAC address as the destination. After delivering the packets to the macvlan, the macvlan will rejects them as the MAC address is incorrect. Consequently, this commit makes macvlan over bond non-functional. To address this problem, one potential solution is to check for the presence of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev) and return NULL in the rlb_arp_xmit() function. However, this approach doesn't fully resolve the situation when a VLAN exists between the bond and macvlan. So let's just do a partial revert for commit 14af9963ba1e in rlb_arp_xmit(). As the comment said, Don't modify or load balance ARPs that do not originate locally. Fixes: 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds") Reported-by: susan.zheng@veritas.com Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-08-22bonding: update port speed when getting bond speedHangbin Liu1-0/+1
Andrew reported a bonding issue that if we put an active-back bond on top of a 802.3ad bond interface. When the 802.3ad bond's speed/duplex changed dynamically. The upper bonding interface's speed/duplex can't be changed at the same time, which will show incorrect speed. Fix it by updating the port speed when calling ethtool. Reported-by: Andrew Schorr <ajschorr@alumni.princeton.edu> Closes: https://lore.kernel.org/netdev/ZEt3hvyREPVdbesO@Laptop-X1/ Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20230821101008.797482-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-08-11bonding: remove unnecessary NULL check in bond_destructorZhengchao Shao1-2/+1
The free_percpu function also could check whether "rr_tx_counter" parameter is NULL. Therefore, remove NULL check in bond_destructor. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11bonding: use bond_set_slave_arr to simplify codeZhengchao Shao1-25/+2
In bond_reset_slave_arr(), values are assigned and memory is released only when the variables "usable" and "all" are not NULL. But even if the "usable" and "all" variables are NULL, they can still work, because value will be checked in kfree_rcu. Therefore, use bond_set_slave_arr() and set the input parameters "usable_slaves" and "all_slaves" to NULL to simplify the code in bond_reset_slave_arr(). And the same to bond_uninit(). Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11bonding: remove redundant NULL check in debugfs functionZhengchao Shao1-9/+0
Because debugfs_create_dir returns ERR_PTR, so bonding_debug_root will never be NULL. Remove redundant NULL check for bonding_debug_root in debugfs function. The later debugfs_create_dir/debugfs_remove_recursive /debugfs_remove_recursive functions will check the dentry with IS_ERR(). Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11bonding: use IS_ERR instead of NULL check in bond_create_debugfsZhengchao Shao1-1/+1
Because debugfs_create_dir returns ERR_PTR, so IS_ERR should be used to check whether the directory is successfully created. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11bonding: add modifier to initialization function and exit functionZhengchao Shao3-5/+5
Some functions are only used in initialization and exit functions, so add the __init/__net_init and __net_exit modifiers to these functions. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+3
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/intel/igc/igc_main.c 06b412589eef ("igc: Add lock to safeguard global Qbv variables") d3750076d464 ("igc: Add TransmissionOverrun counter") drivers/net/ethernet/microsoft/mana/mana_en.c a7dfeda6fdec ("net: mana: Fix MANA VF unload when hardware is unresponsive") a9ca9f9ceff3 ("page_pool: split types and declarations from page_pool.h") 92272ec4107e ("eth: add missing xdp.h includes in drivers") net/mptcp/protocol.h 511b90e39250 ("mptcp: fix disconnect vs accept race") b8dc6d6ce931 ("mptcp: fix rcv buffer auto-tuning") tools/testing/selftests/net/mptcp/mptcp_join.sh c8c101ae390a ("selftests: mptcp: join: fix 'implicit EP' test") 03668c65d153 ("selftests: mptcp: join: rework detailed report") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07bonding: Fix incorrect deletion of ETH_P_8021AD protocol vid from slavesZiyang Xuan1-1/+3
BUG_ON(!vlan_info) is triggered in unregister_vlan_dev() with following testcase: # ip netns add ns1 # ip netns exec ns1 ip link add bond0 type bond mode 0 # ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2 # ip netns exec ns1 ip link set bond_slave_1 master bond0 # ip netns exec ns1 ip link add link bond_slave_1 name vlan10 type vlan id 10 protocol 802.1ad # ip netns exec ns1 ip link add link bond0 name bond0_vlan10 type vlan id 10 protocol 802.1ad # ip netns exec ns1 ip link set bond_slave_1 nomaster # ip netns del ns1 The logical analysis of the problem is as follows: 1. create ETH_P_8021AD protocol vlan10 for bond_slave_1: register_vlan_dev() vlan_vid_add() vlan_info_alloc() __vlan_vid_add() // add [ETH_P_8021AD, 10] vid to bond_slave_1 2. create ETH_P_8021AD protocol bond0_vlan10 for bond0: register_vlan_dev() vlan_vid_add() __vlan_vid_add() vlan_add_rx_filter_info() if (!vlan_hw_filter_capable(dev, proto)) // condition established because bond0 without NETIF_F_HW_VLAN_STAG_FILTER return 0; if (netif_device_present(dev)) return dev->netdev_ops->ndo_vlan_rx_add_vid(dev, proto, vid); // will be never called // The slaves of bond0 will not refer to the [ETH_P_8021AD, 10] vid. 3. detach bond_slave_1 from bond0: __bond_release_one() vlan_vids_del_by_dev() list_for_each_entry(vid_info, &vlan_info->vid_list, list) vlan_vid_del(dev, vid_info->proto, vid_info->vid); // bond_slave_1 [ETH_P_8021AD, 10] vid will be deleted. // bond_slave_1->vlan_info will be assigned NULL. 4. delete vlan10 during delete ns1: default_device_exit_batch() dev->rtnl_link_ops->dellink() // unregister_vlan_dev() for vlan10 vlan_info = rtnl_dereference(real_dev->vlan_info); // real_dev of vlan10 is bond_slave_1 BUG_ON(!vlan_info); // bond_slave_1->vlan_info is NULL now, bug is triggered!!! Add S-VLAN tag related features support to bond driver. So the bond driver will always propagate the VLAN info to its slaves. Fixes: 8ad227ff89a7 ("net: vlan: add 802.1ad support") Suggested-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20230802114320.4156068-1-william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-04Merge tag 'for-netdev' of ↵Jakub Kicinski1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Martin KaFai Lau says: ==================== pull-request: bpf-next 2023-08-03 We've added 54 non-merge commits during the last 10 day(s) which contain a total of 84 files changed, 4026 insertions(+), 562 deletions(-). The main changes are: 1) Add SO_REUSEPORT support for TC bpf_sk_assign from Lorenz Bauer, Daniel Borkmann 2) Support new insns from cpu v4 from Yonghong Song 3) Non-atomically allocate freelist during prefill from YiFei Zhu 4) Support defragmenting IPv(4|6) packets in BPF from Daniel Xu 5) Add tracepoint to xdp attaching failure from Leon Hwang 6) struct netdev_rx_queue and xdp.h reshuffling to reduce rebuild time from Jakub Kicinski * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits) net: invert the netdevice.h vs xdp.h dependency net: move struct netdev_rx_queue out of netdevice.h eth: add missing xdp.h includes in drivers selftests/bpf: Add testcase for xdp attaching failure tracepoint bpf, xdp: Add tracepoint to xdp attaching failure selftests/bpf: fix static assert compilation issue for test_cls_*.c bpf: fix bpf_probe_read_kernel prototype mismatch riscv, bpf: Adapt bpf trampoline to optimized riscv ftrace framework libbpf: fix typos in Makefile tracing: bpf: use struct trace_entry in struct syscall_tp_t bpf, devmap: Remove unused dtab field from bpf_dtab_netdev bpf, cpumap: Remove unused cmap field from bpf_cpu_map_entry netfilter: bpf: Only define get_proto_defrag_hook() if necessary bpf: Fix an array-index-out-of-bounds issue in disasm.c net: remove duplicate INDIRECT_CALLABLE_DECLARE of udp[6]_ehashfn docs/bpf: Fix malformed documentation bpf: selftests: Add defrag selftests bpf: selftests: Support custom type and proto for client sockets bpf: selftests: Support not connecting client socket netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link ... ==================== Link: https://lore.kernel.org/r/20230803174845.825419-1-martin.lau@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03eth: add missing xdp.h includes in driversJakub Kicinski1-0/+1
Handful of drivers currently expect to get xdp.h by virtue of including netdevice.h. This will soon no longer be the case so add explicit includes. Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/20230803010230.1755386-2-kuba@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-08-03bonding: support balance-alb with openvswitchMateusz Kowalski1-1/+1
Commit d5410ac7b0ba ("net:bonding:support balance-alb interface with vlan to bridge") introduced a support for balance-alb mode for interfaces connected to the linux bridge by fixing missing matching of MAC entry in FDB. In our testing we discovered that it still does not work when the bond is connected to the OVS bridge as show in diagram below: eth1(mac:eth1_mac)--bond0(balance-alb,mac:eth0_mac)--eth0(mac:eth0_mac) | bond0.150(mac:eth0_mac) | ovs_bridge(ip:bridge_ip,mac:eth0_mac) This patch fixes it by checking not only if the device is a bridge but also if it is an openvswitch. Signed-off-by: Mateusz Kowalski <mko@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/9fe7297c-609e-208b-c77b-3ceef6eb51a4@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-08-03net: bonding: convert to ndo_hwtstamp_get() / ndo_hwtstamp_set()Maxim Georgiev1-40/+65
bonding is one of the stackable net devices which pass the hardware timestamping ops to the real device through ndo_eth_ioctl(). This prevents converting any device driver to the new hwtimestamping API without regressions. Remove that limitation in bonding by using the newly introduced helpers for timestamping through lower devices, that handle both the new and the old driver API. Signed-off-by: Maxim Georgiev <glipus@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230801142824.1772134-6-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-25bonding: reset bond's flags when down link is P2P deviceHangbin Liu1-0/+5
When adding a point to point downlink to the bond, we neglected to reset the bond's flags, which were still using flags like BROADCAST and MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink interfaces, such as when adding a GRE device to the bonding. To address this issue, let's reset the bond's flags for P2P interfaces. Before fix: 7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond0 state UNKNOWN group default qlen 1000 link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr 167f:18:f188:: 8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/gre6 2006:70:10::1 brd 2006:70:10::2 inet6 fe80::200:ff:fe00:0/64 scope link valid_lft forever preferred_lft forever After fix: 7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond2 state UNKNOWN group default qlen 1000 link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr c29e:557a:e9d9:: 8: bond0: <POINTOPOINT,NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/gre6 2006:70:10::1 peer 2006:70:10::2 inet6 fe80::1/64 scope link valid_lft forever preferred_lft forever Reported-by: Liang Li <liali@redhat.com> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438 Fixes: 872254dd6b1f ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
Merge in late fixes to prepare for the 6.5 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24bonding: do not assume skb mac_header is setEric Dumazet1-1/+1
Drivers must not assume in their ndo_start_xmit() that skbs have their mac_header set. skb->data is all what is needed. bonding seems to be one of the last offender as caught by syzbot: WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 skb_mac_offset include/linux/skbuff.h:2913 [inline] WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_xmit_hash drivers/net/bonding/bond_main.c:4170 [inline] WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5149 [inline] WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_3ad_xor_xmit drivers/net/bonding/bond_main.c:5186 [inline] WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 __bond_start_xmit drivers/net/bonding/bond_main.c:5442 [inline] WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_start_xmit+0x14ab/0x19d0 drivers/net/bonding/bond_main.c:5470 Modules linked in: CPU: 1 PID: 12155 Comm: syz-executor.3 Not tainted 6.1.30-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 RIP: 0010:skb_mac_header include/linux/skbuff.h:2907 [inline] RIP: 0010:skb_mac_offset include/linux/skbuff.h:2913 [inline] RIP: 0010:bond_xmit_hash drivers/net/bonding/bond_main.c:4170 [inline] RIP: 0010:bond_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5149 [inline] RIP: 0010:bond_3ad_xor_xmit drivers/net/bonding/bond_main.c:5186 [inline] RIP: 0010:__bond_start_xmit drivers/net/bonding/bond_main.c:5442 [inline] RIP: 0010:bond_start_xmit+0x14ab/0x19d0 drivers/net/bonding/bond_main.c:5470 Code: 8b 7c 24 30 e8 76 dd 1a 01 48 85 c0 74 0d 48 89 c3 e8 29 67 2e fe e9 15 ef ff ff e8 1f 67 2e fe e9 10 ef ff ff e8 15 67 2e fe <0f> 0b e9 45 f8 ff ff e8 09 67 2e fe e9 dc fa ff ff e8 ff 66 2e fe RSP: 0018:ffffc90002fff6e0 EFLAGS: 00010283 RAX: ffffffff835874db RBX: 000000000000ffff RCX: 0000000000040000 RDX: ffffc90004dcf000 RSI: 00000000000000b5 RDI: 00000000000000b6 RBP: ffffc90002fff8b8 R08: ffffffff83586d16 R09: ffffffff83586584 R10: 0000000000000007 R11: ffff8881599fc780 R12: ffff88811b6a7b7e R13: 1ffff110236d4f6f R14: ffff88811b6a7ac0 R15: 1ffff110236d4f76 FS: 00007f2e9eb47700(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2e421000 CR3: 000000010e6d4000 CR4: 00000000003526e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> [<ffffffff8471a49f>] netdev_start_xmit include/linux/netdevice.h:4925 [inline] [<ffffffff8471a49f>] __dev_direct_xmit+0x4ef/0x850 net/core/dev.c:4380 [<ffffffff851d845b>] dev_direct_xmit include/linux/netdevice.h:3043 [inline] [<ffffffff851d845b>] packet_direct_xmit+0x18b/0x300 net/packet/af_packet.c:284 [<ffffffff851c7472>] packet_snd net/packet/af_packet.c:3112 [inline] [<ffffffff851c7472>] packet_sendmsg+0x4a22/0x64d0 net/packet/af_packet.c:3143 [<ffffffff8467a4b2>] sock_sendmsg_nosec net/socket.c:716 [inline] [<ffffffff8467a4b2>] sock_sendmsg net/socket.c:736 [inline] [<ffffffff8467a4b2>] __sys_sendto+0x472/0x5f0 net/socket.c:2139 [<ffffffff8467a715>] __do_sys_sendto net/socket.c:2151 [inline] [<ffffffff8467a715>] __se_sys_sendto net/socket.c:2147 [inline] [<ffffffff8467a715>] __x64_sys_sendto+0xe5/0x100 net/socket.c:2147 [<ffffffff8553071f>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff8553071f>] do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80 [<ffffffff85600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 7b8fc0103bb5 ("bonding: add a vlan+srcmac tx hashing option") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jarod Wilson <jarod@redhat.com> Cc: Moshe Tal <moshet@nvidia.com> Cc: Jussi Maki <joamaki@gmail.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230622152304.2137482-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15net: tls: make the offload check helper take skb not socketJakub Kicinski1-2/+2
All callers of tls_is_sk_tx_device_offloaded() currently do an equivalent of: if (skb->sk && tls_is_skb_tx_device_offloaded(skb->sk)) Have the helper accept skb and do the skb->sk check locally. Two drivers have local static inlines with similar wrappers already. While at it change the ifdef condition to TLS_DEVICE. Only TLS_DEVICE selects SOCK_VALIDATE_XMIT, so the two are equivalent. This makes removing the duplicated IS_ENABLED() check in funeth more obviously correct. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Dimitris Michailidis <dmichail@fungible.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+7
Cross-merge networking fixes after downstream PR. Conflicts: net/ipv4/raw.c 3632679d9e4f ("ipv{4,6}/raw: fix output xfrm lookup wrt protocol") c85be08fc4fa ("raw: Stop using RTO_ONLINK.") https://lore.kernel.org/all/20230525110037.2b532b83@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/freescale/fec_main.c 9025944fddfe ("net: fec: add dma_wmb to ensure correct descriptor values") 144470c88c5d ("net: fec: using the standard return codes when xdp xmit errors") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-20net: fix stack overflow when LRO is disabled for virtual interfacesTaehee Yoo1-1/+7
When the virtual interface's feature is updated, it synchronizes the updated feature for its own lower interface. This propagation logic should be worked as the iteration, not recursively. But it works recursively due to the netdev notification unexpectedly. This problem occurs when it disables LRO only for the team and bonding interface type. team0 | +------+------+-----+-----+ | | | | | team1 team2 team3 ... team200 If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE event to its own lower interfaces(team1 ~ team200). It is worked by netdev_sync_lower_features(). So, the NETDEV_FEAT_CHANGE notification logic of each lower interface work iteratively. But generated NETDEV_FEAT_CHANGE event is also sent to the upper interface too. upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own lower interfaces again. lower and upper interfaces receive this event and generate this event again and again. So, the stack overflow occurs. But it is not the infinite loop issue. Because the netdev_sync_lower_features() updates features before generating the NETDEV_FEAT_CHANGE event. Already synchronized lower interfaces skip notification logic. So, it is just the problem that iteration logic is changed to the recursive unexpectedly due to the notification mechanism. Reproducer: ip link add team0 type team ethtool -K team0 lro on for i in {1..200} do ip link add team$i master team0 type team ethtool -K team$i lro on done ethtool -K team0 lro off In order to fix it, the notifier_ctx member of bonding/team is introduced. Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-16net: bonding: Add SPDX identifier to remaining filesBagas Sanjaya2-4/+3
Previous batches of SPDX conversion missed bond_main.c and bonding_priv.h because these files doesn't mention intended GPL version. Add SPDX identifier to these files, assuming GPL 1.0+. Cc: Thomas Davis <tadavis@lbl.gov> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-12bonding: Always assign be16 value to vlan_protoSimon Horman1-3/+5
The type of the vlan_proto field is __be16. And most users of the field use it as such. In the case of setting or testing the field for the special VLAN_N_VID value, host byte order is used. Which seems incorrect. It also seems somewhat odd to store a VLAN ID value in a field that is otherwise used to store Ether types. Address this issue by defining BOND_VLAN_PROTO_NONE, a big endian value. 0xffff was chosen somewhat arbitrarily. What is important is that it doesn't overlap with any valid VLAN Ether types. I don't believe the problems described above are a bug because VLAN_N_VID in both little-endian and big-endian byte order does not conflict with any supported VLAN Ether types in big-endian byte order. Reported by sparse as: .../bond_main.c:2857:26: warning: restricted __be16 degrades to integer .../bond_main.c:2863:20: warning: restricted __be16 degrades to integer .../bond_main.c:2939:40: warning: incorrect type in assignment (different base types) .../bond_main.c:2939:40: expected restricted __be16 [usertype] vlan_proto .../bond_main.c:2939:40: got int No functional changes intended. Compile tested only. Signed-off-by: Simon Horman <horms@kernel.org> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10bonding: fix send_peer_notif overflowHangbin Liu2-2/+13
Bonding send_peer_notif was defined as u8. Since commit 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications"). the bond->send_peer_notif will be num_peer_notif multiplied by peer_notif_delay, which is u8 * u32. This would cause the send_peer_notif overflow easily. e.g. ip link add bond0 type bond mode 1 miimon 100 num_grat_arp 30 peer_notify_delay 1000 To fix the overflow, let's set the send_peer_notif to u32 and limit peer_notif_delay to 300s. Reported-by: Liang Li <liali@redhat.com> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2090053 Fixes: 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-06Merge tag 'net-6.4-rc1' of ↵Linus Torvalds2-0/+31
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - sched: act_pedit: free pedit keys on bail from offset check Current release - new code bugs: - pds_core: - Kconfig fixes (DEBUGFS and AUXILIARY_BUS) - fix mutex double unlock in error path Previous releases - regressions: - sched: cls_api: remove block_cb from driver_list before freeing - nf_tables: fix ct untracked match breakage - eth: mtk_eth_soc: drop generic vlan rx offload - sched: flower: fix error handler on replace Previous releases - always broken: - tcp: fix skb_copy_ubufs() vs BIG TCP - ipv6: fix skb hash for some RST packets - af_packet: don't send zero-byte data in packet_sendmsg_spkt() - rxrpc: timeout handling fixes after moving client call connection to the I/O thread - ixgbe: fix panic during XDP_TX with > 64 CPUs - igc: RMW the SRRCTL register to prevent losing timestamp config - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621 - r8152: - fix flow control issue of RTL8156A - fix the poor throughput for 2.5G devices - move setting r8153b_rx_agg_chg_indicate() to fix coalescing - enable autosuspend - ncsi: clear Tx enable mode when handling a Config required AEN - octeontx2-pf: macsec: fixes for CN10KB ASIC rev Misc: - 9p: remove INET dependency" * tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop() pds_core: fix mutex double unlock in error path net/sched: flower: fix error handler on replace Revert "net/sched: flower: Fix wrong handle assignment during filter change" net/sched: flower: fix filter idr initialization net: fec: correct the counting of XDP sent frames bonding: add xdp_features support net: enetc: check the index of the SFI rather than the handle sfc: Add back mailing list virtio_net: suppress cpu stall when free_unused_bufs ice: block LAN in case of VF to VF offload net: dsa: mt7530: fix network connectivity with multiple CPU ports net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 9p: Remove INET dependency netfilter: nf_tables: fix ct untracked match breakage af_packet: Don't send zero-byte data in packet_sendmsg_spkt(). igc: read before write to SRRCTL register pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig pds_core: remove CONFIG_DEBUG_FS from makefile ionic: catch failure from devlink_alloc ...
2023-05-05bonding: add xdp_features supportLorenzo Bianconi2-0/+31
Introduce xdp_features support for bonding driver according to the slave devices attached to the master one. xdp_features is required whenever we want to xdp_redirect traffic into a bond device and then into selected slaves attached to it. Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Jussi Maki <joamaki@gmail.com> Tested-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-27Merge tag 'driver-core-6.4-rc1' of ↵Linus Torvalds1-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...
2023-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+4
Adjacent changes: net/mptcp/protocol.h 63740448a32e ("mptcp: fix accept vs worker race") 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close") ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19bonding: Fix memory leak when changing bond type to EthernetIdo Schimmel1-3/+4
When a net device is put administratively up, its 'IFF_UP' flag is set (if not set already) and a 'NETDEV_UP' notification is emitted, which causes the 8021q driver to add VLAN ID 0 on the device. The reverse happens when a net device is put administratively down. When changing the type of a bond to Ethernet, its 'IFF_UP' flag is incorrectly cleared, resulting in the kernel skipping the above process and VLAN ID 0 being leaked [1]. Fix by restoring the flag when changing the type to Ethernet, in a similar fashion to the restoration of the 'IFF_SLAVE' flag. The issue can be reproduced using the script in [2], with example out before and after the fix in [3]. [1] unreferenced object 0xffff888103479900 (size 256): comm "ip", pid 329, jiffies 4294775225 (age 28.561s) hex dump (first 32 bytes): 00 a0 0c 15 81 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0 [<ffffffff8406426c>] vlan_vid_add+0x30c/0x790 [<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0 [<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0 [<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150 [<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0 [<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180 [<ffffffff8379af36>] do_setlink+0xb96/0x4060 [<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0 [<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0 [<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00 [<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839a738f>] netlink_unicast+0x53f/0x810 [<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90 [<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70 [<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0 unreferenced object 0xffff88810f6a83e0 (size 32): comm "ip", pid 329, jiffies 4294775225 (age 28.561s) hex dump (first 32 bytes): a0 99 47 03 81 88 ff ff a0 99 47 03 81 88 ff ff ..G.......G..... 81 00 00 00 01 00 00 00 cc cc cc cc cc cc cc cc ................ backtrace: [<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0 [<ffffffff84064369>] vlan_vid_add+0x409/0x790 [<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0 [<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0 [<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150 [<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0 [<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180 [<ffffffff8379af36>] do_setlink+0xb96/0x4060 [<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0 [<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0 [<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00 [<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839a738f>] netlink_unicast+0x53f/0x810 [<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90 [<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70 [<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0 [2] ip link add name t-nlmon type nlmon ip link add name t-dummy type dummy ip link add name t-bond type bond mode active-backup ip link set dev t-bond up ip link set dev t-nlmon master t-bond ip link set dev t-nlmon nomaster ip link show dev t-bond ip link set dev t-dummy master t-bond ip link show dev t-bond ip link del dev t-bond ip link del dev t-dummy ip link del dev t-nlmon [3] Before: 12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000 link/netlink 12: t-bond: <BROADCAST,MULTICAST,MASTER,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 46:57:39:a4:46:a2 brd ff:ff:ff:ff:ff:ff After: 12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000 link/netlink 12: t-bond: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 66:48:7b:74:b6:8a brd ff:ff:ff:ff:ff:ff Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type") Fixes: 75c78500ddad ("bonding: remap muticast addresses without using dev_close() and dev_open()") Fixes: 9ec7eb60dcbc ("bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change") Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Link: https://lore.kernel.org/netdev/78a8a03b-6070-3e6b-5042-f848dab16fb8@alu.unizg.hr/ Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19bonding: add software tx timestamping supportHangbin Liu1-0/+30
Currently, bonding only obtain the timestamp (ts) information of the active slave, which is available only for modes 1, 5, and 6. For other modes, bonding only has software rx timestamping support. However, some users who use modes such as LACP also want tx timestamp support. To address this issue, let's check the ts information of each slave. If all slaves support tx timestamping, we can enable tx timestamping support for the bond. Add a note that the get_ts_info may be called with RCU, or rtnl or reference on the device in ethtool.h> Suggested-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20230418034841.2566262-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-07bonding: fix ns validation on backup slavesHangbin Liu1-2/+3
When arp_validate is set to 2, 3, or 6, validation is performed for backup slaves as well. As stated in the bond documentation, validation involves checking the broadcast ARP request sent out via the active slave. This helps determine which slaves are more likely to function in the event of an active slave failure. However, when the target is an IPv6 address, the NS message sent from the active interface is not checked on backup slaves. Additionally, based on the bond_arp_rcv() rule b, we must reverse the saddr and daddr when checking the NS message. Note that when checking the NS message, the destination address is a multicast address. Therefore, we must convert the target address to solicited multicast in the bond_get_targets_ip6() function. Prior to the fix, the backup slaves had a mii status of "down", but after the fix, all of the slaves' mii status was updated to "UP". Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Reviewed-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03Merge 6.3-rc5 into driver-core-nextGreg Kroah-Hartman1-7/+16
We need the fixes in here for testing, as well as the driver core changes for documentation updates to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-29driver core: class: mark the struct class for sysfs callbacks as constantGreg Kroah-Hartman1-9/+9
struct class should never be modified in a sysfs callback as there is nothing in the structure to modify, and frankly, the structure is almost never used in a sysfs callback, so mark it as constant to allow struct class to be moved to read-only memory. While we are touching all class sysfs callbacks also mark the attribute as constant as it can not be modified. The bonding code still uses this structure so it can not be removed from the function callbacks. Cc: "David S. Miller" <davem@davemloft.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Russ Weight <russell.h.weight@intel.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steve French <sfrench@samba.org> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-cifs@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: linux-rdma@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: netdev@vger.kernel.org Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20230325084537.3622280-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-17bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave failsNikolay Aleksandrov1-3/+1
syzbot reported a warning[1] where the bond device itself is a slave and we try to enslave a non-ethernet device as the first slave which fails but then in the error path when ether_setup() restores the bond device it also clears all flags. In my previous fix[2] I restored the IFF_MASTER flag, but I didn't consider the case that the bond device itself might also be a slave with IFF_SLAVE set, so we need to restore that flag as well. Use the bond_ether_setup helper which does the right thing and restores the bond's flags properly. Steps to reproduce using a nlmon dev: $ ip l add nlmon0 type nlmon $ ip l add bond1 type bond $ ip l add bond2 type bond $ ip l set bond1 master bond2 $ ip l set dev nlmon0 master bond1 $ ip -d l sh dev bond1 22: bond1: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noqueue master bond2 state DOWN mode DEFAULT group default qlen 1000 (now bond1's IFF_SLAVE flag is gone and we'll hit a warning[3] if we try to delete it) [1] https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef [2] commit 7d5cd2ce5292 ("bonding: correctly handle bonding type change on enslave failure") [3] example warning: [ 27.008664] bond1: (slave nlmon0): The slave device specified does not support setting the MAC address [ 27.008692] bond1: (slave nlmon0): Error -95 calling set_mac_address [ 32.464639] bond1 (unregistering): Released all slaves [ 32.464685] ------------[ cut here ]------------ [ 32.464686] WARNING: CPU: 1 PID: 2004 at net/core/dev.c:10829 unregister_netdevice_many+0x72a/0x780 [ 32.464694] Modules linked in: br_netfilter bridge bonding virtio_net [ 32.464699] CPU: 1 PID: 2004 Comm: ip Kdump: loaded Not tainted 5.18.0-rc3+ #47 [ 32.464703] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 [ 32.464704] RIP: 0010:unregister_netdevice_many+0x72a/0x780 [ 32.464707] Code: 99 fd ff ff ba 90 1a 00 00 48 c7 c6 f4 02 66 96 48 c7 c7 20 4d 35 96 c6 05 fa c7 2b 02 01 e8 be 6f 4a 00 0f 0b e9 73 fd ff ff <0f> 0b e9 5f fd ff ff 80 3d e3 c7 2b 02 00 0f 85 3b fd ff ff ba 59 [ 32.464710] RSP: 0018:ffffa006422d7820 EFLAGS: 00010206 [ 32.464712] RAX: ffff8f6e077140a0 RBX: ffffa006422d7888 RCX: 0000000000000000 [ 32.464714] RDX: ffff8f6e12edbe58 RSI: 0000000000000296 RDI: ffffffff96d4a520 [ 32.464716] RBP: ffff8f6e07714000 R08: ffffffff96d63600 R09: ffffa006422d7728 [ 32.464717] R10: 0000000000000ec0 R11: ffffffff9698c988 R12: ffff8f6e12edb140 [ 32.464719] R13: dead000000000122 R14: dead000000000100 R15: ffff8f6e12edb140 [ 32.464723] FS: 00007f297c2f1740(0000) GS:ffff8f6e5d900000(0000) knlGS:0000000000000000 [ 32.464725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 32.464726] CR2: 00007f297bf1c800 CR3: 00000000115e8000 CR4: 0000000000350ee0 [ 32.464730] Call Trace: [ 32.464763] <TASK> [ 32.464767] rtnl_dellink+0x13e/0x380 [ 32.464776] ? cred_has_capability.isra.0+0x68/0x100 [ 32.464780] ? __rtnl_unlock+0x33/0x60 [ 32.464783] ? bpf_lsm_capset+0x10/0x10 [ 32.464786] ? security_capable+0x36/0x50 [ 32.464790] rtnetlink_rcv_msg+0x14e/0x3b0 [ 32.464792] ? _copy_to_iter+0xb1/0x790 [ 32.464796] ? post_alloc_hook+0xa0/0x160 [ 32.464799] ? rtnl_calcit.isra.0+0x110/0x110 [ 32.464802] netlink_rcv_skb+0x50/0xf0 [ 32.464806] netlink_unicast+0x216/0x340 [ 32.464809] netlink_sendmsg+0x23f/0x480 [ 32.464812] sock_sendmsg+0x5e/0x60 [ 32.464815] ____sys_sendmsg+0x22c/0x270 [ 32.464818] ? import_iovec+0x17/0x20 [ 32.464821] ? sendmsg_copy_msghdr+0x59/0x90 [ 32.464823] ? do_set_pte+0xa0/0xe0 [ 32.464828] ___sys_sendmsg+0x81/0xc0 [ 32.464832] ? mod_objcg_state+0xc6/0x300 [ 32.464835] ? refill_obj_stock+0xa9/0x160 [ 32.464838] ? memcg_slab_free_hook+0x1a5/0x1f0 [ 32.464842] __sys_sendmsg+0x49/0x80 [ 32.464847] do_syscall_64+0x3b/0x90 [ 32.464851] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 32.464865] RIP: 0033:0x7f297bf2e5e7 [ 32.464868] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 32.464869] RSP: 002b:00007ffd96c824c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 32.464872] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f297bf2e5e7 [ 32.464874] RDX: 0000000000000000 RSI: 00007ffd96c82540 RDI: 0000000000000003 [ 32.464875] RBP: 00000000640f19de R08: 0000000000000001 R09: 000000000000007c [ 32.464876] R10: 00007f297bffabe0 R11: 0000000000000246 R12: 0000000000000001 [ 32.464877] R13: 00007ffd96c82d20 R14: 00007ffd96c82610 R15: 000055bfe38a7020 [ 32.464881] </TASK> [ 32.464882] ---[ end trace 0000000000000000 ]--- Fixes: 7d5cd2ce5292 ("bonding: correctly handle bonding type change on enslave failure") Reported-by: syzbot+9dfc3f3348729cc82277@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-17bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type changeNikolay Aleksandrov1-4/+15
Add bond_ether_setup helper which is used to fix ether_setup() calls in the bonding driver. It takes care of both IFF_MASTER and IFF_SLAVE flags, the former is always restored and the latter only if it was set. If the bond enslaves non-ARPHRD_ETHER device (changes its type), then releases it and enslaves ARPHRD_ETHER device (changes back) then we use ether_setup() to restore the bond device type but it also resets its flags and removes IFF_MASTER and IFF_SLAVE[1]. Use the bond_ether_setup helper to restore both after such transition. [1] reproduce (nlmon is non-ARPHRD_ETHER): $ ip l add nlmon0 type nlmon $ ip l add bond2 type bond mode active-backup $ ip l set nlmon0 master bond2 $ ip l set nlmon0 nomaster $ ip l add bond1 type bond (we use bond1 as ARPHRD_ETHER device to restore bond2's mode) $ ip l set bond1 master bond2 $ ip l sh dev bond2 37: bond2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether be:d7:c5:40:5b:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500 (notice bond2's IFF_MASTER is missing) Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
net/devlink/leftover.c / net/core/devlink.c: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global") f05bd8ebeb69 ("devlink: move code to a dedicated directory") 687125b5799c ("devlink: split out core code") https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-04bonding: fix error checking in bond_debug_reregister()Qi Zheng1-1/+1
Since commit ff9fb72bc077 ("debugfs: return error values, not NULL") changed return value of debugfs_rename() in error cases from %NULL to %ERR_PTR(-ERROR), we should also check error values instead of NULL. Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20230202093256.32458-1-zhengqi.arch@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-27bonding: fill IPsec state validation failure reasonLeon Romanovsky1-1/+1
Rely on extack to return failure reason. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-27xfrm: extend add state callback to set failure reasonLeon Romanovsky1-3/+5
Almost all validation logic is in the drivers, but they are missing reliable way to convey failure reason to userspace applications. Let's use extack to return this information to users. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-03drivers/net/bonding/bond_3ad: return when there's no aggregatorDaniil Tatianin1-0/+1
Otherwise we would dereference a NULL aggregator pointer when calling __set_agg_ports_ready on the line below. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-22bonding: fix lockdep splat in bond_miimon_commit()Eric Dumazet1-3/+5
bond_miimon_commit() is run while RTNL is held, not RCU. WARNING: suspicious RCU usage 6.1.0-syzkaller-09671-g89529367293c #0 Not tainted ----------------------------- drivers/net/bonding/bond_main.c:2704 suspicious rcu_dereference_check() usage! Fixes: e95cc44763a4 ("bonding: do failover when high prio link up") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Hangbin Liu <liuhangbin@gmail.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Link: https://lore.kernel.org/r/20221220130831.1480888-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-14bonding: do failover when high prio link upHangbin Liu1-9/+15
Currently, when a high prio link enslaved, or when current link down, the high prio port could be selected. But when high prio link up, the new active slave reselection is not triggered. Fix it by checking link's prio when getting up. Making the do_failover after looping all slaves as there may be multi high prio slaves up. Reported-by: Liang Li <liali@redhat.com> Fixes: 0a2ff7cc8ad4 ("Bonding: add per-port priority for failover re-selection") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-14bonding: add missed __rcu annotation for curr_active_slaveHangbin Liu1-1/+1
There is one direct accesses to bond->curr_active_slave in bond_miimon_commit(). Protected it by rcu_access_pointer() since the later of this function also use this one. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-13net: add IFF_NO_ADDRCONF and use it in bonding to prevent ipv6 addrconfXin Long1-5/+13
Currently, in bonding it reused the IFF_SLAVE flag and checked it in ipv6 addrconf to prevent ipv6 addrconf. However, it is not a proper flag to use for no ipv6 addrconf, for bonding it has to move IFF_SLAVE flag setting ahead of dev_open() in bond_enslave(). Also, IFF_MASTER/SLAVE are historical flags used in bonding and eql, as Jiri mentioned, the new devices like Team, Failover do not use this flag. So as Jiri suggested, this patch adds IFF_NO_ADDRCONF in priv_flags of the device to indicate no ipv6 addconf, and uses it in bonding and moves IFF_SLAVE flag setting back to its original place. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-07bonding: get correct NA dest addressHangbin Liu1-1/+1
In commit 4d633d1b468b ("bonding: fix ICMPv6 header handling when receiving IPv6 messages"), there is a copy/paste issue for NA daddr. I found that in my testing and fixed it in my local branch. But I forgot to re-format the patch and sent the wrong mail. Fix it by reading the correct dest address. Fixes: 4d633d1b468b ("bonding: fix ICMPv6 header handling when receiving IPv6 messages") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Link: https://lore.kernel.org/r/20221206032055.7517-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01bonding: uninitialized variable in bond_miimon_inspect()Dan Carpenter1-1/+1
The "ignore_updelay" variable needs to be initialized to false. Fixes: f8a65ab2f3ff ("bonding: fix link recovery in mode 2 when updelay is nonzero") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/Y4SWJlh3ohJ6EPTL@kili Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-5/+12
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-24bonding: fix link recovery in mode 2 when updelay is nonzeroJonathan Toppins1-1/+10
Before this change when a bond in mode 2 lost link, all of its slaves lost link, the bonding device would never recover even after the expiration of updelay. This change removes the updelay when the bond currently has no usable links. Conforming to bonding.txt section 13.1 paragraph 4. Fixes: 41f891004063 ("bonding: ignore updelay param when there is no active slave") Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-19bonding: fix ICMPv6 header handling when receiving IPv6 messagesHangbin Liu1-5/+12
Currently, we get icmp6hdr via function icmp6_hdr(), which needs the skb transport header to be set first. But there is no rule to ask driver set transport header before netif_receive_skb() and bond_handle_frame(). So we will not able to get correct icmp6hdr on some drivers. Fix this by using skb_header_pointer to get the IPv6 and ICMPV6 headers. Reported-by: Liang Li <liali@redhat.com> Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20221118034353.1736727-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27bond: Disable TLS features indicationTariq Toukan2-30/+1
Bond agnostically interacts with TLS device-offload requests via the .ndo_sk_get_lower_dev operation. Return value is true iff bond guarantees fixed mapping between the TLS connection and a lower netdev. Due to this nature, the bond TLS device offload features are not explicitly controllable in the bond layer. As of today, these are read-only values based on the evaluation of bond_sk_check(). However, this indication might be incorrect and misleading, when the feature bits are "fixed" by some dependency features. For example, NETIF_F_HW_TLS_TX/RX are forcefully cleared in case the corresponding checksum offload is disabled. But in fact the bond ability to still offload TLS connections to the lower device is not hurt. This means that these bits can not be trusted, and hence better become unused. This patch revives some old discussion [1] and proposes a much simpler solution: Clear the bond's TLS features bits. Everyone should stop reading them. [1] https://lore.kernel.org/netdev/20210526095747.22446-1-tariqt@nvidia.com/ Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20221025105300.4718-1-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-10 02:16:46 +0300