summaryrefslogtreecommitdiff
path: root/drivers/net/can/slcan.c
AgeCommit message (Collapse)AuthorFilesLines
2022-07-03can: slcan: move driver into separate sub directoryDario Binacchi1-885/+0
This patch moves the slcan driver into a separate directory, a later patch will add more files. Link: https://lore.kernel.org/all/20220628163137.413025-10-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-03can: slcan: send the open/close commands to the adapterDario Binacchi1-2/+22
In case the bitrate has been set via ip tool, this patch changes the driver to send the open ("O\r") and close ("C\r) commands to the adapter. Link: https://lore.kernel.org/all/20220628163137.413025-9-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Tested-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-03can: slcan: set bitrate by CAN device driver APIDario Binacchi1-3/+38
It allows to set the bitrate via ip tool, as it happens for the other CAN device drivers. It still remains possible to set the bitrate via slcand or slcan_attach utilities. In case the ip tool is used, the driver will send the serial command to the adapter. Link: https://lore.kernel.org/all/20220628163137.413025-8-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Tested-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-03can: slcan: allow to send commands to the adapterDario Binacchi1-1/+45
This is a preparation patch for the upcoming support to change the bitrate via ip tool, reset the adapter error states via the ethtool API and, more generally, send commands to the adapter. Since the close command (i. e. "C\r") will be sent in the ndo_stop() where netif_running() returns false, a new flag bit (i. e. SLF_XCMD) for serial transmission has to be added. Link: https://lore.kernel.org/all/20220628163137.413025-7-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Tested-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-03can: slcan: use CAN network device driver APIDario Binacchi1-42/+40
As suggested by commit [1], now the driver uses the functions and the data structures provided by the CAN network device driver interface. Currently the driver doesn't implement a way to set bitrate for SLCAN based devices via ip tool, so you'll have to do this by slcand or slcan_attach invocation through the -sX parameter: - slcan_attach -f -s6 -o /dev/ttyACM0 - slcand -f -s8 -o /dev/ttyUSB0 where -s6 in will set adapter's bitrate to 500 Kbit/s and -s8 to 1Mbit/s. See the table below for further CAN bitrates: - s0 -> 10 Kbit/s - s1 -> 20 Kbit/s - s2 -> 50 Kbit/s - s3 -> 100 Kbit/s - s4 -> 125 Kbit/s - s5 -> 250 Kbit/s - s6 -> 500 Kbit/s - s7 -> 800 Kbit/s - s8 -> 1000 Kbit/s In doing so, the struct can_priv::bittiming.bitrate of the driver is not set and since the open_candev() checks that the bitrate has been set, it must be a non-zero value, the bitrate is set to a fake value (-1U) before it is called. Using the rtnl_lock()/rtnl_unlock() functions has become a bit more tricky as the register_candev() function indirectly calls rtnl_lock() via register_netdev(). To avoid a deadlock it is therefore necessary to call rtnl_unlock() before calling register_candev(). The same goes for the unregister_candev() function. [1] commit 39549eef3587f ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/all/20220628163137.413025-6-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Tested-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-03can: slcan: use the alloc_can_skb() helperDario Binacchi1-37/+33
It is used successfully by most (if not all) CAN device drivers. It allows to remove replicated code. Link: https://lore.kernel.org/all/20220628163137.413025-4-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Tested-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-03can: slcan: use netdev helpers to print out messagesDario Binacchi1-3/+2
Replace printk() calls with corresponding netdev helpers. Link: https://lore.kernel.org/all/20220628163137.413025-3-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Tested-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-03can: slcan: use the BIT() helperDario Binacchi1-1/+1
Use the BIT() helper instead of an explicit shift. Link: https://lore.kernel.org/all/20220628163137.413025-2-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Tested-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-16can: slcan: slc_xmit(): use can_dropped_invalid_skb() instead of manual checkVincent Mailhol1-2/+2
slcan does a manual check in slc_xmit() to verify if the skb is valid. This check is incomplete, use instead can_dropped_invalid_skb(). Link: https://lore.kernel.org/all/20220514141650.1109542-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-06can: Use netif_rx().Sebastian Andrzej Siewior1-1/+1
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-can@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-12Merge tag 'tty-5.17-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty/serial driver updates for 5.17-rc1. Nothing major in here, just lots of good updates and fixes, including: - more tty core cleanups from Jiri as well as mxser driver cleanups. This is the majority of the core diffstat - tty documentation updates from Jiri - platform_get_irq() updates - various serial driver updates for new features and hardware - fifo usage for 8250 console, reducing cpu load a lot - LED fix for keyboards, long-time bugfix that went through many revisions - minor cleanups All have been in linux-next for a while with no reported problems" * tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits) serial: core: Keep mctrl register state and cached copy in sync serial: stm32: correct loop for dma error handling serial: stm32: fix flow control transfer in DMA mode serial: stm32: rework TX DMA state condition serial: stm32: move tx dma terminate DMA to shutdown serial: pl011: Drop redundant DTR/RTS preservation on close/open serial: pl011: Drop CR register reset on set_termios serial: pl010: Drop CR register reset on set_termios serial: liteuart: fix MODULE_ALIAS serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2" tty: goldfish: Use platform_get_irq() to get the interrupt serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2 tty: serial: meson: Drop the legacy compatible strings and clock code serial: pmac_zilog: Use platform_get_irq() to get the interrupt serial: bcm63xx: Use platform_get_irq() to get the interrupt serial: ar933x: Use platform_get_irq() to get the interrupt serial: vt8500: Use platform_get_irq() to get the interrupt serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt serial: pxa: Use platform_get_irq() to get the interrupt ...
2022-01-05can: do not increase tx_bytes statistics for RTR framesVincent Mailhol1-1/+2
The actual payload length of the CAN Remote Transmission Request (RTR) frames is always 0, i.e. no payload is transmitted on the wire. However, those RTR frames still use the DLC to indicate the length of the requested frame. As such, net_device_stats::tx_bytes should not be increased when sending RTR frames. The function can_get_echo_skb() already returns the correct length, even for RTR frames (c.f. [1]). However, for historical reasons, the drivers do not use can_get_echo_skb()'s return value and instead, most of them store a temporary length (or dlc) in some local structure or array. Using the return value of can_get_echo_skb() solves the issue. After doing this, such length/dlc fields become unused and so this patch does the adequate cleaning when needed. This patch fixes all the CAN drivers. Finally, can_get_echo_skb() is decorated with the __must_check attribute in order to force future drivers to correctly use its return value (else the compiler would emit a warning). [1] commit ed3320cec279 ("can: dev: __can_get_echo_skb(): fix real payload length return value for RTR frames") Link: https://lore.kernel.org/all/20211207121531.42941-6-mailhol.vincent@wanadoo.fr Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Yasushi SHOJI <yashi@spacecubics.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Stephane Grosjean <s.grosjean@peak-system.com> Cc: Andreas Larsson <andreas@gaisler.com> Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2 Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2 [mkl: add conversion for grcan] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-05can: do not increase rx_bytes statistics for RTR framesVincent Mailhol1-1/+3
The actual payload length of the CAN Remote Transmission Request (RTR) frames is always 0, i.e. no payload is transmitted on the wire. However, those RTR frames still use the DLC to indicate the length of the requested frame. As such, net_device_stats::rx_bytes should not be increased for the RTR frames. This patch fixes all the CAN drivers. Link: https://lore.kernel.org/all/20211207121531.42941-5-mailhol.vincent@wanadoo.fr Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Yasushi SHOJI <yashi@spacecubics.com> Cc: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> Cc: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2 Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-11-25tty: remove file from tty_ldisc_ops::ioctl and compat_ioctlJiri Slaby1-2/+2
After the previous patches, noone needs 'file' parameter in neither ioctl hook from tty_ldisc_ops. So remove 'file' from both of them. Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> [NFC] Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20211122094529.24171-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22tty: remove file from tty_mode_ioctlJiri Slaby1-1/+1
The only user of 'file' parameter in tty_mode_ioctl is a BUG_ON check. Provided it never crashed for anyone, it's an overkill to pass the parameter to tty_mode_ioctl only for this check. If we wanted to check 'file' there, we should handle it in more graceful way anyway. Not by a BUG == crash. Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210914091134.17426-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22tty: make tty_ldisc_ops::hangup return voidJiri Slaby1-2/+1
The documentation says that the return value of tty_ldisc_ops::hangup hook is ignored. And it really is, so there is no point for its return type to be int. Switch it to void and all the hooks too. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210914091134.17426-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13tty: no checking of tty_unregister_ldiscJiri Slaby1-3/+1
tty_unregister_ldisc now returns 0 = success. No need to check the return value. In fact, the users only warned if an error occured and didn't do anything useful anyway -- the ldisc module was unloaded in any case. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Chris Brannon <chris@the-brannons.com> Cc: Kirk Reiser <kirk@reisers.ca> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Rodolfo Giometti <giometti@enneenne.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Link: https://lore.kernel.org/r/20210505091928.22010-19-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13tty: make tty_ldisc_ops a param in tty_unregister_ldiscJiri Slaby1-1/+1
Make tty_unregister_ldisc symmetric to tty_register_ldisc by accepting struct tty_ldisc_ops as a parameter instead of ldisc number. This avoids checking of the ldisc number bounds in tty_unregister_ldisc. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Chris Brannon <chris@the-brannons.com> Cc: Kirk Reiser <kirk@reisers.ca> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Rodolfo Giometti <giometti@enneenne.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Link: https://lore.kernel.org/r/20210505091928.22010-17-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13tty: set tty_ldisc_ops::num staticallyJiri Slaby1-1/+2
There is no reason to pass the ldisc number to tty_register_ldisc separately. Just set it in the already defined tty_ldisc_ops in all the ldiscs. This simplifies tty_register_ldisc a bit too (no need to set the num member there). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Chris Brannon <chris@the-brannons.com> Cc: Kirk Reiser <kirk@reisers.ca> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Rodolfo Giometti <giometti@enneenne.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Link: https://lore.kernel.org/r/20210505091928.22010-15-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13tty: make fp of tty_ldisc_ops::receive_buf{,2} constJiri Slaby1-1/+2
Char pointer (cp) passed to tty_ldisc_ops::receive_buf{,2} is const. There is no reason for flag pointer (fp) not to be too. So switch it in the definition and all uses. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Chris Brannon <chris@the-brannons.com> Cc: Kirk Reiser <kirk@reisers.ca> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20210505091928.22010-12-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10tty: remove TTY_LDISC_MAGICJiri Slaby1-1/+0
First, it is never checked. Second, use of it as a debugging aid is at least questionable. With the current tools, I don't think anyone used this kind of thing for debugging purposes for years. On the top of that, e.g. serdev does not set this field of tty_ldisc_ops at all. So get rid of this legacy. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210302062214.29627-8-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-25net: introduce CAN specific pointer in the struct net_deviceOleksij Rempel1-1/+3
Since 20dd3850bcf8 ("can: Speed up CAN frame receiption by using ml_priv") the CAN framework uses per device specific data in the AF_CAN protocol. For this purpose the struct net_device->ml_priv is used. Later the ml_priv usage in CAN was extended for other users, one of them being CAN_J1939. Later in the kernel ml_priv was converted to an union, used by other drivers. E.g. the tun driver started storing it's stats pointer. Since tun devices can claim to be a CAN device, CAN specific protocols will wrongly interpret this pointer, which will cause system crashes. Mostly this issue is visible in the CAN_J1939 stack. To fix this issue, we request a dedicated CAN pointer within the net_device struct. Reported-by: syzbot+5138c4dd15a0401bec7b@syzkaller.appspotmail.com Fixes: 20dd3850bcf8 ("can: Speed up CAN frame receiption by using ml_priv") Fixes: ffd956eef69b ("can: introduce CAN midlayer private and allocate it automatically") Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Fixes: 497a5757ce4e ("tun: switch to net core provided statistics counters") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210223070127.4538-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20can: replace can_dlc as variable/element for payload lengthOliver Hartkopp1-16/+16
The naming of can_dlc as element of struct can_frame and also as variable name is misleading as it claims to be a 'data length CODE' but in reality it always was a plain data length. With the indroduction of a new 'len' element in struct can_frame we can now remove can_dlc as name and make clear which of the former uses was a plain length (-> 'len') or a data length code (-> 'dlc') value. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201120100444.3199-1-socketcan@hartkopp.net [mkl: gs_usb: keep struct gs_host_frame::can_dlc as is] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-04-01slcan: Don't transmit uninitialized stack data in paddingRichard Palethorpe1-3/+1
struct can_frame contains some padding which is not explicitly zeroed in slc_bump. This uninitialized data will then be transmitted if the stack initialization hardening feature is not enabled (CONFIG_INIT_STACK_ALL). This commit just zeroes the whole struct including the padding. Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com> Fixes: a1044e36e457 ("can: add slcan driver for serial/USB-serial CAN adapters") Reviewed-by: Kees Cook <keescook@chromium.org> Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Cc: security@kernel.org Cc: wg@grandegger.com Cc: mkl@pengutronix.de Cc: davem@davemloft.net Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+3
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22slcan: not call free_netdev before rtnl_unlock in slcan_openOliver Hartkopp1-0/+3
As the description before netdev_run_todo, we cannot call free_netdev before rtnl_unlock, fix it by reorder the code. This patch is a 1:1 copy of upstream slip.c commit f596c87005f7 ("slip: not call free_netdev before rtnl_unlock in slip_open"). Reported-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net: slcan, slip -- no need for goto when if () will doPavel Machek1-5/+2
No need to play with gotos to jump over single statement. Signed-off-by: Pavel Machek <pavel@ucw.cz> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-22can, slip: Protect tty->disc_data in write_wakeup and close with RCURichard Palethorpe1-2/+10
write_wakeup can happen in parallel with close/hangup where tty->disc_data is set to NULL and the netdevice is freed thus also freeing disc_data. write_wakeup accesses disc_data so we must prevent close from freeing the netdev while write_wakeup has a non-NULL view of tty->disc_data. We also need to make sure that accesses to disc_data are atomic. Which can all be done with RCU. This problem was found by Syzkaller on SLCAN, but the same issue is reproducible with the SLIP line discipline using an LTP test based on the Syzkaller reproducer. A fix which didn't use RCU was posted by Hillf Danton. Fixes: 661f7fda21b1 ("slip: Fix deadlock in write_wakeup") Fixes: a8e83b17536a ("slcan: Port write_wakeup deadlock fix from slip") Reported-by: syzbot+017e491ae13c0068598a@syzkaller.appspotmail.com Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Tyler Hall <tylerwhall@gmail.com> Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: syzkaller@googlegroups.com Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03can: slcan: Fix use-after-free Read in slcan_openJouni Hogander1-0/+1
Slcan_open doesn't clean-up device which registration failed from the slcan_devs device list. On next open this list is iterated and freed device is accessed. Fix this by calling slc_free_netdev in error path. Driver/net/can/slcan.c is derived from slip.c. Use-after-free error was identified in slip_open by syzboz. Same bug is in slcan.c. Here is the trace from the Syzbot slip report: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:634 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 sl_sync drivers/net/slip/slip.c:725 [inline] slip_open+0xecd/0x11b7 drivers/net/slip/slip.c:801 tty_ldisc_open.isra.0+0xa3/0x110 drivers/tty/tty_ldisc.c:469 tty_set_ldisc+0x30e/0x6b0 drivers/tty/tty_ldisc.c:596 tiocsetd drivers/tty/tty_io.c:2334 [inline] tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2594 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: ed50e1600b44 ("slcan: Fix memory leak in error path") Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: David Miller <davem@davemloft.net> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com> Cc: linux-stable <stable@vger.kernel.org> # >= v5.4 Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-14slcan: Fix memory leak in error pathJouni Hogander1-0/+1
This patch is fixing memory leak reported by Syzkaller: BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096): comm "syz-executor043", pid 454, jiffies 4294759719 (age 11.930s) hex dump (first 32 bytes): 73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0.......... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000a06eec0d>] __kmalloc+0x18b/0x2c0 [<0000000083306e66>] kvmalloc_node+0x3a/0xc0 [<000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080 [<0000000061a996c9>] slcan_open+0x3ae/0x9a0 [<000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0 [<0000000019289631>] tty_set_ldisc+0x28c/0x5f0 [<000000004de5a617>] tty_ioctl+0x48d/0x1590 [<00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510 [<0000000059068dbc>] ksys_ioctl+0x99/0xb0 [<000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0 [<0000000053d0332e>] do_syscall_64+0x16f/0x580 [<0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<000000008ea75434>] 0xffffffffffffffff Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-09-04can: make use of preallocated can_ml_priv for per device struct ↵Marc Kleine-Budde1-0/+1
can_dev_rcv_lists This patch removes the old method of allocating the per device protocol specific memory via a netdevice_notifier. This had the drawback, that the allocation can fail, leading to a lot of null pointer checks in the code. This also makes the live cycle management of this memory quite complicated. This patch switches from the allocating the struct can_dev_rcv_lists in a NETDEV_REGISTER call to using the dev->ml_priv, which is allocated by the driver since the previous patch. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-09-04can: introduce CAN midlayer private and allocate it automaticallyMarc Kleine-Budde1-1/+4
This patch introduces the CAN midlayer private structure ("struct can_ml_priv") which should be used to hold protocol specific per device data structures. For now it's only member is "struct can_dev_rcv_lists". The CAN midlayer private is allocated via alloc_netdev()'s private and assigned to "struct net_device::ml_priv" during device creation. This is done transparently for CAN drivers using alloc_candev(). The slcan, vcan and vxcan drivers which are not using alloc_candev() have been adopted manually. The memory layout of the netdev_priv allocated via alloc_candev() will looke like this: +-------------------------+ | driver's priv | +-------------------------+ | struct can_ml_priv | +-------------------------+ | array of struct sk_buff | +-------------------------+ Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-01-05can: slcan: slc_alloc(): remove unused parameter "dev_t line"Marc Kleine-Budde1-2/+2
The first and only parameter of slc_alloc() is unused, so remove it. Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg1-2/+1
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07net: Fix inconsistent teardown and release of private netdev state.David S. Miller1-4/+3
Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17can: slcan: Replace sizeof struct can_frame with CAN_MTUMarek Vasut1-2/+2
Use CAN_MTU macro instead of sizeof(struct can_frame) just like the other drivers do. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-07-15can: slcan: don't touch skb after netif_rx_ni()Marc Kleine-Budde1-1/+1
There is no guarantee that the skb is in the same state after calling net_receive_skb() or netif_rx(). It might be freed or reused. Not really harmful as its a read access, except you turn on the proper debugging options which catch a use after free. Cc: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-07-12can: replace timestamp as unique skb attributeOliver Hartkopp1-1/+1
Commit 514ac99c64b "can: fix multiple delivery of a single CAN frame for overlapping CAN filters" requires the skb->tstamp to be set to check for identical CAN skbs. Without timestamping to be required by user space applications this timestamp was not generated which lead to commit 36c01245eb8 "can: fix loss of CAN frames in raw_rcv" - which forces the timestamp to be set in all CAN related skbuffs by introducing several __net_timestamp() calls. This forces e.g. out of tree drivers which are not using alloc_can{,fd}_skb() to add __net_timestamp() after skbuff creation to prevent the frame loss fixed in mainline Linux. This patch removes the timestamp dependency and uses an atomic counter to create an unique identifier together with the skbuff pointer. Btw: the new skbcnt element introduced in struct can_skb_priv has to be initialized with zero in out-of-tree drivers which are not using alloc_can{,fd}_skb() too. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-06-21can: fix loss of CAN frames in raw_rcvOliver Hartkopp1-0/+1
As reported by Manfred Schlaegl here http://marc.info/?l=linux-netdev&m=143482089824232&w=2 commit 514ac99c64b "can: fix multiple delivery of a single CAN frame for overlapping CAN filters" requires the skb->tstamp to be set to check for identical CAN skbs. As net timestamping is influenced by several players (netstamp_needed and netdev_tstamp_prequeue) Manfred missed a proper timestamp which leads to CAN frame loss. As skb timestamping became now mandatory for CAN related skbs this patch makes sure that received CAN skbs always have a proper timestamp set. Maybe there's a better solution in the future but this patch fixes the CAN frame loss so far. Reported-by: Manfred Schlaegl <manfred.schlaegl@gmx.at> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-12-07can: slcan/vcan: eliminate banner[] variable, switch to pr_info()Jeremiah Mahler1-5/+2
Several can modules in drivers/net/can use a banner[] variable at the top which defines a string that is used once during init. This string is also embedded with KERN_INFO which makes it printk() specific. Improve the code by eliminating the banner[] variable and moving the string to where it is printed. Then switch from printk(KERN_INFO to pr_info() for the lines that were changed. This patch is similar to [1] which was applied to net/can. [1]: https://lkml.org/lkml/2014/11/22/10 Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-07-16net: set name_assign_type in alloc_netdev()Tom Gundersen1-1/+1
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-17slcan: Port write_wakeup deadlock fix from slipTyler Hall1-10/+27
The commit "slip: Fix deadlock in write_wakeup" fixes a deadlock caused by a change made in both slcan and slip. This is a direct port of that fix. Signed-off-by: Tyler Hall <tylerwhall@gmail.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Andre Naujoks <nautsch2@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-25can: slcan: Fix spinlock variantAlexander Stein1-3/+3
slc_xmit is called within softirq context and locks sl->lock, but slcan_write_wakeup is not softirq context, so we need to use spin_[un]lock_bh! Detected using kernel lock debugging mechanism. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-03-17can: Unify MTU settings for CAN interfacesOliver Hartkopp1-0/+6
CAN interfaces only support MTU values of 16 (CAN 2.0) and 72 (CAN FD). Setting the MTU to other values is pointless but it does not really hurt. With the introduction of the CAN FD support in drivers/net/can a new function to switch the MTU for CAN FD has been introduced. This patch makes use of this can_change_mtu() function to check for correct MTU settings also in legacy CAN (2.0) devices. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-12-17can: Fix FSF address in file headersJeff Kirsher1-3/+1
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: Wolfgang Grandegger <wg@grandegger.com> CC: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-09-20slcan: rewrite of slc_bump and slc_encapsAndre Naujoks1-49/+87
The old implementation was heavy on str* functions and sprintf calls. This version is more manual, but faster. Profiling just the printing of a 3 char CAN-id resulted in 60 instructions for the manual method and over 2000 for the sprintf method. Bear in mind the profiling was done against libc and not the kernel sprintf. Together with this rewrite an issue with sending and receiving of RTR frames has been fixed by Oliver for the cases that the DLC is not zero. Signed-off-by: Andre Naujoks <nautsch2@gmail.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20slip/slcan: added locking in wakeup functionAndre Naujoks1-0/+3
The locking is needed, since the the internal buffer for the CAN frames is changed during the wakeup call. This could cause buffer inconsistencies under high loads, especially for the outgoing short CAN packet skbuffs. The needed locks led to deadlocks before commit "5ede52538ee2b2202d9dff5b06c33bfde421e6e4 tty: Remove extra wakeup from pty write() path", which removed the direct callback to the wakeup function from the tty layer. As slcan.c is based on slip.c the issue in the original code is fixed, too. Signed-off-by: Andre Naujoks <nautsch2@gmail.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-03net: can: replace strict_strtoul() with kstrtoul()Jingoo Han1-1/+1
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-27 10:47:46 +0300