summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/aquantia/atlantic
AgeCommit message (Collapse)AuthorFilesLines
2022-05-11net: atlantic: verify hw_head_ lies within TX buffer ringGrant Grundler1-0/+7
Bounds check hw_head index provided by NIC to verify it lies within the TX buffer ring. Reported-by: Aashay Shringarpure <aashay@google.com> Reported-by: Yi Chou <yich@google.com> Reported-by: Shervin Oloumi <enlightened@google.com> Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-11net: atlantic: add check for MAX_SKB_FRAGSGrant Grundler1-1/+5
Enforce that the CPU can not get stuck in an infinite loop. Reported-by: Aashay Shringarpure <aashay@google.com> Reported-by: Yi Chou <yich@google.com> Reported-by: Shervin Oloumi <enlightened@google.com> Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-11net: atlantic: reduce scope of is_rsc_completeGrant Grundler1-7/+6
Don't defer handling the err case outside the loop. That's pointless. And since is_rsc_complete is only used inside this loop, declare it inside the loop to reduce it's scope. Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-11net: atlantic: fix "frag[0] not initialized"Grant Grundler1-2/+1
In aq_ring_rx_clean(), if buff->is_eop is not set AND buff->len < AQ_CFG_RX_HDR_SIZE, then hdr_len remains equal to buff->len and skb_add_rx_frag(xxx, *0*, ...) is not called. The loop following this code starts calling skb_add_rx_frag() starting with i=1 and thus frag[0] is never initialized. Since i is initialized to zero at the top of the primary loop, we can just reference and post-increment i instead of hardcoding the 0 when calling skb_add_rx_frag() the first time. Reported-by: Aashay Shringarpure <aashay@google.com> Reported-by: Yi Chou <yich@google.com> Reported-by: Shervin Oloumi <enlightened@google.com> Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-10net: atlantic: always deep reset on pm op, fixing up my null deref regressionManuel Ullmann1-2/+2
The impact of this regression is the same for resume that I saw on thaw: the kernel hangs and nothing except SysRq rebooting can be done. Fixes regression in commit cbe6c3a8f8f4 ("net: atlantic: invert deep par in pm functions, preventing null derefs"), where I disabled deep pm resets in suspend and resume, trying to make sense of the atl_resume_common() deep parameter in the first place. It turns out, that atlantic always has to deep reset on pm operations. Even though I expected that and tested resume, I screwed up by kexec-rebooting into an unpatched kernel, thus missing the breakage. This fixup obsoletes the deep parameter of atl_resume_common, but I leave the cleanup for the maintainers to post to mainline. Suspend and hibernation were successfully tested by the reporters. Fixes: cbe6c3a8f8f4 ("net: atlantic: invert deep par in pm functions, preventing null derefs") Link: https://lore.kernel.org/regressions/9-Ehc_xXSwdXcvZqKD5aSqsqeNj5Izco4MYEwnx5cySXVEc9-x_WC4C3kAoCqNTi-H38frroUK17iobNVnkLtW36V6VWGSQEOHXhmVMm5iQ=@protonmail.com/ Reported-by: Jordan Leppert <jordanleppert@protonmail.com> Reported-by: Holger Hoffstaette <holger@applied-asynchrony.com> Tested-by: Jordan Leppert <jordanleppert@protonmail.com> Tested-by: Holger Hoffstaette <holger@applied-asynchrony.com> CC: <stable@vger.kernel.org> # 5.10+ Signed-off-by: Manuel Ullmann <labre@posteo.de> Link: https://lore.kernel.org/r/87bkw8dfmp.fsf@posteo.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-18net: atlantic: invert deep par in pm functions, preventing null derefsManuel Ullmann1-4/+4
This will reset deeply on freeze and thaw instead of suspend and resume and prevent null pointer dereferences of the uninitialized ring 0 buffer while thawing. The impact is an indefinitely hanging kernel. You can't switch consoles after this and the only possible user interaction is SysRq. BUG: kernel NULL pointer dereference RIP: 0010:aq_ring_rx_fill+0xcf/0x210 [atlantic] aq_vec_init+0x85/0xe0 [atlantic] aq_nic_init+0xf7/0x1d0 [atlantic] atl_resume_common+0x4f/0x100 [atlantic] pci_pm_thaw+0x42/0xa0 resolves in aq_ring.o to ``` 0000000000000ae0 <aq_ring_rx_fill>: { /* ... */ baf: 48 8b 43 08 mov 0x8(%rbx),%rax buff->flags = 0U; /* buff is NULL */ ``` The bug has been present since the introduction of the new pm code in 8aaa112a57c1 ("net: atlantic: refactoring pm logic") and was hidden until 8ce84271697a ("net: atlantic: changes for multi-TC support"), which refactored the aq_vec_{free,alloc} functions into aq_vec_{,ring}_{free,alloc}, but is technically not wrong. The original functions just always reinitialized the buffers on S3/S4. If the interface is down before freezing, the bug does not occur. It does not matter, whether the initrd contains and loads the module before thawing. So the fix is to invert the boolean parameter deep in all pm function calls, which was clearly intended to be set like that. First report was on Github [1], which you have to guess from the resume logs in the posted dmesg snippet. Recently I posted one on Bugzilla [2], since I did not have an AQC device so far. #regzbot introduced: 8ce84271697a #regzbot from: koo5 <kolman.jindrich@gmail.com> #regzbot monitor: https://github.com/Aquantia/AQtion/issues/32 Fixes: 8aaa112a57c1 ("net: atlantic: refactoring pm logic") Link: https://github.com/Aquantia/AQtion/issues/32 [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=215798 [2] Cc: stable@vger.kernel.org Reported-by: koo5 <kolman.jindrich@gmail.com> Signed-off-by: Manuel Ullmann <labre@posteo.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-09net: atlantic: Avoid out-of-bounds indexingKai-Heng Feng2-16/+16
UBSAN warnings are observed on atlantic driver: [ 294.432996] UBSAN: array-index-out-of-bounds in /build/linux-Qow4fL/linux-5.15.0/drivers/net/ethernet/aquantia/atlantic/aq_nic.c:484:48 [ 294.433695] index 8 is out of range for type 'aq_vec_s *[8]' The ring is dereferenced right before breaking out the loop, to prevent that from happening, only use the index in the loop to fix the issue. BugLink: https://bugs.launchpad.net/bugs/1958770 Tested-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20220408022204.16815-1-kai.heng.feng@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-24net: atlantic: Use the bitmap API instead of hand-writing itChristophe JAILLET1-4/+2
Simplify code by using bitmap_weight() and bitmap_zero() instead of hand-writing these functions. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+8
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c commit 077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port") commit 31108d142f36 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'") commit 4390c6edc0fb ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'") https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/ net/smc/smc_wr.c commit 49dc9013e34b ("net/smc: Use the bitmap API when applicable") commit 349d43127dac ("net/smc: fix kernel panic caused by race of smc_sock") bitmap_zero()/memset() is removed by the fix Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-27atlantic: Fix buff_ring OOB in aq_ring_rx_cleanZekun Shen1-0/+8
The function obtain the next buffer without boundary check. We should return with I/O error code. The bug is found by fuzzing and the crash report is attached. It is an OOB bug although reported as use-after-free. [ 4.804724] BUG: KASAN: use-after-free in aq_ring_rx_clean+0x1e88/0x2730 [atlantic] [ 4.805661] Read of size 4 at addr ffff888034fe93a8 by task ksoftirqd/0/9 [ 4.806505] [ 4.806703] CPU: 0 PID: 9 Comm: ksoftirqd/0 Tainted: G W 5.6.0 #34 [ 4.809030] Call Trace: [ 4.809343] dump_stack+0x76/0xa0 [ 4.809755] print_address_description.constprop.0+0x16/0x200 [ 4.810455] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic] [ 4.811234] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic] [ 4.813183] __kasan_report.cold+0x37/0x7c [ 4.813715] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic] [ 4.814393] kasan_report+0xe/0x20 [ 4.814837] aq_ring_rx_clean+0x1e88/0x2730 [atlantic] [ 4.815499] ? hw_atl_b0_hw_ring_rx_receive+0x9a5/0xb90 [atlantic] [ 4.816290] aq_vec_poll+0x179/0x5d0 [atlantic] [ 4.816870] ? _GLOBAL__sub_I_65535_1_aq_pci_func_init+0x20/0x20 [atlantic] [ 4.817746] ? __next_timer_interrupt+0xba/0xf0 [ 4.818322] net_rx_action+0x363/0xbd0 [ 4.818803] ? call_timer_fn+0x240/0x240 [ 4.819302] ? __switch_to_asm+0x40/0x70 [ 4.819809] ? napi_busy_loop+0x520/0x520 [ 4.820324] __do_softirq+0x18c/0x634 [ 4.820797] ? takeover_tasklets+0x5f0/0x5f0 [ 4.821343] run_ksoftirqd+0x15/0x20 [ 4.821804] smpboot_thread_fn+0x2f1/0x6b0 [ 4.822331] ? smpboot_unregister_percpu_thread+0x160/0x160 [ 4.823041] ? __kthread_parkme+0x80/0x100 [ 4.823571] ? smpboot_unregister_percpu_thread+0x160/0x160 [ 4.824301] kthread+0x2b5/0x3b0 [ 4.824723] ? kthread_create_on_node+0xd0/0xd0 [ 4.825304] ret_from_fork+0x35/0x40 Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEXHangbin Liu1-3/+0
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") the user could get bond active interface's PHC index directly. But when there is a failover, the bond active interface will change, thus the PHC index is also changed. This may break the user's program if they did not update the PHC timely. This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When the user wants to get the bond active interface's PHC, they need to add this flag and be aware the PHC index may be changed. With the new flag. All flag checks in current drivers are removed. Only the checking in net_hwtstamp_validate() is kept. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski11-65/+198
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-02ethernet: aquantia: Try MAC address from device treeTianhao Chai1-10/+14
Apple M1 Mac minis (2020) with 10GE NICs do not have MAC address in the card, but instead need to obtain MAC addresses from the device tree. In this case the hardware will report an invalid MAC. Currently atlantic driver does not query the DT for MAC address and will randomly assign a MAC if the NIC doesn't have a permanent MAC burnt in. This patch causes the driver to perfer a valid MAC address from OF (if present) over HW self-reported MAC and only fall back to a random MAC address when neither of them is valid. Signed-off-by: Tianhao Chai <cth451@gmail.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Reviewed-by: Hector Martin <marcan@marcan.st> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29atlantic: Remove warn trace message.Sameer Saurabh1-3/+0
Remove the warn trace message - it's not a correct check here, because the function can still be called on the device in DOWN state Fixes: 508f2e3dce454 ("net: atlantic: split rx and tx per-queue stats") Signed-off-by: Sameer Saurabh <ssaurabh@marvell.com> Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29atlantic: Fix statistics logic for production hardwareDmitry Bogdanov5-27/+139
B0 is the main and widespread device revision of atlantic2 HW. In the current state, driver will incorrectly fetch the statistics for this revision. Fixes: 5cfd54d7dc186 ("net: atlantic: minimal A2 fw_ops") Signed-off-by: Dmitry Bogdanov <dbezrukov@marvell.com> Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29Remove Half duplex mode speed capabilities.Sameer Saurabh1-4/+1
Since Half Duplex mode has been deprecated by the firmware, driver should not advertise Half Duplex speed in ethtool support link speed values. Fixes: 071a02046c262 ("net: atlantic: A2: half duplex support") Signed-off-by: Sameer Saurabh <ssaurabh@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29atlantic: Add missing DIDs and fix 115c.Nikita Danilov4-1/+27
At the late production stages new dev ids were introduced. These are now in production, so its important for the driver to recognize these. And also fix the board caps for AQC115C adapter. Fixes: b3f0c79cba206 ("net: atlantic: A2 hw_ops skeleton") Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29atlantic: Fix to display FW bundle version instead of FW mac version.Sameer Saurabh1-3/+3
The correct way to reflect firmware version is to use bundle version. Hence populating the same instead of MAC fw version. Fixes: c1be0bf092bd2 ("net: atlantic: common functions needed for basic A2 init/deinit hw_ops") Signed-off-by: Sameer Saurabh <ssaurabh@marvell.com> Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29atlatnic: enable Nbase-t speeds with base-tNikita Danilov3-19/+13
When 2.5G is advertised, N-Base should be advertised against the T-base caps. N5G is out of use in baseline code and driver should treat both 5G and N5G (and also 2.5G and N2.5G) equally from user perspective. Fixes: 5cfd54d7dc186 ("net: atlantic: minimal A2 fw_ops") Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29atlantic: Increase delay for fw transactionsDmitry Bogdanov1-2/+5
The max waiting period (of 1 ms) while reading the data from FW shared buffer is too small for certain types of data (e.g., stats). There's a chance that FW could be updating buffer at the same time and driver would be unsuccessful in reading data. Firmware manual recommends to have 1 sec timeout to fix this issue. Fixes: 5cfd54d7dc186 ("net: atlantic: minimal A2 fw_ops") Signed-off-by: Dmitry Bogdanov <dbezrukov@marvell.com> Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+2
drivers/net/ipa/ipa_main.c 8afc7e471ad3 ("net: ipa: separate disabling setup from modem stop") 76b5fbcd6b47 ("net: ipa: kill ipa_modem_init()") Duplicated include, drop one. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen1-2/+6
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19atlantic: fix double-free in aq_ring_tx_cleanZekun Shen1-1/+2
We found this bug while fuzzing the device driver. Using and freeing the dangling pointer buff->skb would cause use-after-free and double-free. This bug is triggerable with compromised/malfunctioning devices. We found the bug with QEMU emulation and tested the patch by emulation. We did NOT test on a real device. Attached is the bug report. BUG: KASAN: double-free or invalid-free in consume_skb+0x6c/0x1c0 Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? consume_skb+0x6c/0x1c0 kasan_report_invalid_free+0x61/0xa0 ? consume_skb+0x6c/0x1c0 __kasan_slab_free+0x15e/0x170 ? consume_skb+0x6c/0x1c0 kfree+0x8c/0x230 consume_skb+0x6c/0x1c0 aq_ring_tx_clean+0x5c2/0xa80 [atlantic] aq_vec_poll+0x309/0x5d0 [atlantic] ? _sub_I_65535_1+0x20/0x20 [atlantic] ? __next_timer_interrupt+0xba/0xf0 net_rx_action+0x363/0xbd0 ? call_timer_fn+0x240/0x240 ? __switch_to_asm+0x34/0x70 ? napi_busy_loop+0x520/0x520 ? net_tx_action+0x379/0x720 __do_softirq+0x18c/0x634 ? takeover_tasklets+0x5f0/0x5f0 run_ksoftirqd+0x15/0x20 smpboot_thread_fn+0x2f1/0x6b0 ? smpboot_unregister_percpu_thread+0x160/0x160 ? __kthread_parkme+0x80/0x100 ? smpboot_unregister_percpu_thread+0x160/0x160 kthread+0x2b5/0x3b0 ? kthread_create_on_node+0xd0/0xd0 ret_from_fork+0x22/0x40 Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu> Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15atlantic: Fix OOB read and write in hw_atl_utils_fw_rpc_waitZekun Shen1-0/+10
This bug report shows up when running our research tools. The reports is SOOB read, but it seems SOOB write is also possible a few lines below. In details, fw.len and sw.len are inputs coming from io. A len over the size of self->rpc triggers SOOB. The patch fixes the bugs by adding sanity checks. The bugs are triggerable with compromised/malfunctioning devices. They are potentially exploitable given they first leak up to 0xffff bytes and able to overwrite the region later. The patch is tested with QEMU emulater. This is NOT tested with a real device. Attached is the log we found by fuzzing. BUG: KASAN: slab-out-of-bounds in hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] Read of size 4 at addr ffff888016260b08 by task modprobe/213 CPU: 0 PID: 213 Comm: modprobe Not tainted 5.6.0 #1 Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] __kasan_report.cold+0x37/0x7c ? aq_hw_read_reg_bit+0x60/0x70 [atlantic] ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] kasan_report+0xe/0x20 hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] hw_atl_utils_fw_rpc_call+0x95/0x130 [atlantic] hw_atl_utils_fw_rpc_wait+0x176/0x210 [atlantic] hw_atl_utils_mpi_create+0x229/0x2e0 [atlantic] ? hw_atl_utils_fw_rpc_wait+0x210/0x210 [atlantic] ? hw_atl_utils_initfw+0x9f/0x1c8 [atlantic] hw_atl_utils_initfw+0x12a/0x1c8 [atlantic] aq_nic_ndev_register+0x88/0x650 [atlantic] ? aq_nic_ndev_init+0x235/0x3c0 [atlantic] aq_pci_probe+0x731/0x9b0 [atlantic] ? aq_pci_func_init+0xc0/0xc0 [atlantic] local_pci_probe+0xd3/0x160 pci_device_probe+0x23f/0x3e0 Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu> Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: aquantia: use eth_hw_addr_set()Jakub Kicinski1-2/+4
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Use an array on the stack, then call eth_hw_addr_set(). eth_hw_addr_set() is after error checking, this should be fine, error propagates all the way to failing probe. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14ethernet: constify references to netdev->dev_addr in driversJakub Kicinski8-14/+14
This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-02ethernet: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski1-1/+1
Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23atlantic: Fix issue in the pm resume flow.Sudarsana Reddy Kalluru1-2/+2
After fixing hibernation resume flow, another usecase was found which should be explicitly handled - resume when device is in "down" state. Invoke aq_nic_init jointly with aq_nic_start only if ndev was already up during suspend/hibernate. We still need to perform nic_deinit() if caller requests for it, to handle the freeze/resume scenarios. Fixes: 57f780f1c433 ("atlantic: Fix driver resume flow.") Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+3
include/linux/netdevice.h net/socket.c d0efb16294d1 ("net: don't unconditionally copy_from_user a struct ifreq for socket ioctls") 876f0bf9d0d5 ("net: socket: simplify dev_ifconf handling") 29c4964822aa ("net: socket: rework compat_ifreq_ioctl()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-29atlantic: Fix driver resume flow.Sudarsana Reddy Kalluru1-0/+3
Driver crashes when restoring from the Hibernate. In the resume flow, driver need to clean up the older nic/vec objects and re-initialize them. Fixes: 8aaa112a57c1d ("net: atlantic: refactoring pm logic") Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo1-2/+6
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-23net: atlantic: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-9/+3
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. A useless "!= 0" has also been removed in a test. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann1-1/+1
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24net: atlantic: fix the macsec key lengthAntoine Tenart1-2/+2
The key length used to store the macsec key was set to MACSEC_KEYID_LEN (16), which is an issue as: - This was never meant to be the key length. - The key length can be > 16. Fix this by using MACSEC_MAX_KEY_LEN instead (the max length accepted in uAPI). Fixes: 27736563ce32 ("net: atlantic: MACSec egress offload implementation") Fixes: 9ff40a751a6f ("net: atlantic: MACSec ingress offload implementation") Reported-by: Lior Nahmanson <liorna@nvidia.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12net: ethernet: aquantia: Handle error cleanup of start on openNathan Rossi1-1/+3
The aq_nic_start function can fail in a variety of cases which leaves the device in broken state. An example case where the start function fails is the request_threaded_irq which can be interrupted, resulting in a EINTR result. This can be manually triggered by bringing the link up (e.g. ip link set up) and triggering a SIGINT on the initiating process (e.g. Ctrl+C). This would put the device into a half configured state. Subsequently bringing the link up again would cause the napi_enable to BUG. In order to correctly clean up the failed attempt to start a device call aq_nic_stop. Signed-off-by: Nathan Rossi <nathan.rossi@digi.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-74/+52
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24aquantia: Remove the build_skb pathLincoln Ramsay1-74/+52
When performing IPv6 forwarding, there is an expectation that SKBs will have some headroom. When forwarding a packet from the aquantia driver, this does not always happen, triggering a kernel warning. aq_ring.c has this code (edited slightly for brevity): if (buff->is_eop && buff->len <= AQ_CFG_RX_FRAME_MAX - AQ_SKB_ALIGN) { skb = build_skb(aq_buf_vaddr(&buff->rxdata), AQ_CFG_RX_FRAME_MAX); } else { skb = napi_alloc_skb(napi, AQ_CFG_RX_HDR_SIZE); There is a significant difference between the SKB produced by these 2 code paths. When napi_alloc_skb creates an SKB, there is a certain amount of headroom reserved. However, this is not done in the build_skb codepath. As the hardware buffer that build_skb is built around does not handle the presence of the SKB header, this code path is being removed and the napi_alloc_skb path will always be used. This code path does have to copy the packet header into the SKB, but it adds the packet data as a frag. Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code") Signed-off-by: Lincoln Ramsay <lincoln.ramsay@opengear.com> Link: https://lore.kernel.org/r/MWHPR1001MB23184F3EAFA413E0D1910EC9E8FC0@MWHPR1001MB2318.namprd10.prod.outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24net: don't include ethtool.h from netdevice.hJakub Kicinski1-0/+2
linux/netdevice.h is included in very many places, touching any of its dependecies causes large incremental builds. Drop the linux/ethtool.h include, linux/netdevice.h just needs a forward declaration of struct ethtool_ops. Fix all the places which made use of this implicit include. Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: atlantic: Remove unnecessary conversion to boolKaixu Xia1-1/+1
The '!=' expression itself is bool, no need to convert it to bool. Fix the following coccicheck warning: ./drivers/net/ethernet/aquantia/atlantic/aq_nic.c:1477:34-39: WARNING: conversion to bool not needed here Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Link: https://lore.kernel.org/r/1604797919-10157-1-git-send-email-kaixuxia@tencent.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20net: remove unneeded breakTom Rix1-1/+0
A break is not needed if it is preceded by a return or goto Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201019172607.31622-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-06net: atlantic: implement media detect feature via phy tunablesIgor Russkikh5-0/+60
Mediadetect is another name for the EDPD (energy detect power down). This feature allows device to save extra power when no link is available. PHY goes into the extreme power saving mode and only periodically wakes up and checks for the link. AQC devices has fixed check period of 6 seconds The feature may increase linkup time. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06net: atlantic: implement phy downshift featureIgor Russkikh6-0/+103
PHY downshift allows phy to try renegotiate if link is unstable and can carry higher speed. AQC devices has integrated PHY which is controlled by MAC firmware. Thus, driver defines new ethtool callbacks to implement phy tunables via netdev. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+2
Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26net: atlantic: fix build when object tree is separateIgor Russkikh1-2/+2
Driver subfolder files refer parent folder includes in an absolute manner. Makefile contains a -I for this, but apparently that does not work if object tree is separated. Adding srctree to fix that. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26drivers/net/ethernet: remove incorrectly formatted docJesse Brandeburg1-1/+1
As part of the W=1 series for ethernet, these drivers were discovered to be using kdoc style comments but were not actually doing kdoc. The kernel uses kdoc style when documenting code, not doxygen or other styles. Fixed Warnings: drivers/net/ethernet/amazon/ena/ena_com.c:613: warning: Function parameter or member 'ena_dev' not described in 'ena_com_set_llq' drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c:1540: warning: Cannot understand * @brief Set VLAN filter table drivers/net/ethernet/xilinx/ll_temac_main.c:114: warning: Function parameter or member 'lp' not described in 'temac_indirect_busywait' drivers/net/ethernet/xilinx/ll_temac_main.c:129: warning: Function parameter or member 'lp' not described in 'temac_indirect_in32' drivers/net/ethernet/xilinx/ll_temac_main.c:129: warning: Function parameter or member 'reg' not described in 'temac_indirect_in32' drivers/net/ethernet/xilinx/ll_temac_main.c:147: warning: Function parameter or member 'lp' not described in 'temac_indirect_in32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:147: warning: Function parameter or member 'reg' not described in 'temac_indirect_in32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:172: warning: Function parameter or member 'lp' not described in 'temac_indirect_out32' drivers/net/ethernet/xilinx/ll_temac_main.c:172: warning: Function parameter or member 'reg' not described in 'temac_indirect_out32' drivers/net/ethernet/xilinx/ll_temac_main.c:172: warning: Function parameter or member 'value' not described in 'temac_indirect_out32' drivers/net/ethernet/xilinx/ll_temac_main.c:188: warning: Function parameter or member 'lp' not described in 'temac_indirect_out32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:188: warning: Function parameter or member 'reg' not described in 'temac_indirect_out32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:188: warning: Function parameter or member 'value' not described in 'temac_indirect_out32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:212: warning: Function parameter or member 'lp' not described in 'temac_dma_in32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:212: warning: Function parameter or member 'reg' not described in 'temac_dma_in32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:228: warning: Function parameter or member 'lp' not described in 'temac_dma_out32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:228: warning: Function parameter or member 'reg' not described in 'temac_dma_out32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:228: warning: Function parameter or member 'value' not described in 'temac_dma_out32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:247: warning: Function parameter or member 'lp' not described in 'temac_dma_dcr_in' drivers/net/ethernet/xilinx/ll_temac_main.c:247: warning: Function parameter or member 'reg' not described in 'temac_dma_dcr_in' drivers/net/ethernet/xilinx/ll_temac_main.c:255: warning: Function parameter or member 'lp' not described in 'temac_dma_dcr_out' drivers/net/ethernet/xilinx/ll_temac_main.c:255: warning: Function parameter or member 'reg' not described in 'temac_dma_dcr_out' drivers/net/ethernet/xilinx/ll_temac_main.c:255: warning: Function parameter or member 'value' not described in 'temac_dma_dcr_out' drivers/net/ethernet/xilinx/ll_temac_main.c:265: warning: Function parameter or member 'lp' not described in 'temac_dcr_setup' drivers/net/ethernet/xilinx/ll_temac_main.c:265: warning: Function parameter or member 'op' not described in 'temac_dcr_setup' drivers/net/ethernet/xilinx/ll_temac_main.c:265: warning: Function parameter or member 'np' not described in 'temac_dcr_setup' drivers/net/ethernet/xilinx/ll_temac_main.c:300: warning: Function parameter or member 'ndev' not described in 'temac_dma_bd_release' drivers/net/ethernet/xilinx/ll_temac_main.c:330: warning: Function parameter or member 'ndev' not described in 'temac_dma_bd_init' drivers/net/ethernet/xilinx/ll_temac_main.c:600: warning: Function parameter or member 'ndev' not described in 'temac_setoptions' drivers/net/ethernet/xilinx/ll_temac_main.c:600: warning: Function parameter or member 'options' not described in 'temac_setoptions' Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-20net: atlantic: Use readx_poll_timeout() for large timeoutSebastian Andrzej Siewior1-2/+2
Commit 8dcf2ad39fdb2 ("net: atlantic: add hwmon getter for MAC temperature") implemented a read callback with an udelay(10000U). This fails to compile on ARM because the delay is >1ms. I doubt that it is needed to spin for 10ms even if possible on x86. >From looking at the code, the context appears to be preemptible so using usleep() should work and avoid busy spinning. Use readx_poll_timeout() in the poll loop. Fixes: 8dcf2ad39fdb2 ("net: atlantic: add hwmon getter for MAC temperature") Cc: Mark Starovoytov <mstarovoitov@marvell.com> Cc: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-04net: ethernet: aquantia: Fix wrong return valueTianjia Zhang1-1/+1
In function hw_atl_a0_hw_multicast_list_set(), when an invalid request is encountered, a negative error code should be returned. Fixes: bab6de8fd180b ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions") Cc: David VomLehn <vomlehn@texas.net> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller7-11/+74
The UDP reuseport conflict was a little bit tricky. The net-next code, via bpf-next, extracted the reuseport handling into a helper so that the BPF sk lookup code could invoke it. At the same time, the logic for reuseport handling of unconnected sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace which changed the logic to carry on the reuseport result into the rest of the lookup loop if we do not return immediately. This requires moving the reuseport_has_conns() logic into the callers. While we are here, get rid of inline directives as they do not belong in foo.c files. The other changes were cases of more straightforward overlapping modifications. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-23net: atlantic: fix PTP on AQC10XEgor Pomozov1-1/+6
This patch fixes PTP on AQC10X. PTP support on AQC10X requires FW involvement and FW configures the TPS data arb mode itself. So we must make sure driver doesn't touch TPS data arb mode on AQC10x if PTP is enabled. Otherwise, there are no timestamps even though packets are flowing. Fixes: 2deac71ac492a ("net: atlantic: QoS implementation: min_rate") Signed-off-by: Egor Pomozov <epomozov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: atlantic: add hwmon getter for MAC temperatureMark Starovoytov10-22/+215
This patch adds the possibility to obtain MAC temperature via hwmon. On A1 there are two separate temperature sensors. On A2 there's only one temperature sensor, which is used for reporting both MAC and PHY temperature. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-10 11:32:12 +0300