summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)AuthorFilesLines
2021-08-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-37/+77
drivers/ptp/Kconfig: 55c8fca1dae1 ("ptp_pch: Restore dependency on PCI") e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-16bnxt_en: Add missing DMA memory barriersMichael Chan1-0/+12
Each completion ring entry has a valid bit to indicate that the entry contains a valid completion event. The driver's main poll loop __bnxt_poll_work() has the proper dma_rmb() to make sure the valid bit of the next entry has been checked before proceeding further. But when we call bnxt_rx_pkt() to process the RX event, the RX completion event consists of two completion entries and only the first entry has been checked to be valid. We need the same barrier after checking the next completion entry. Add missing dma_rmb() barriers in bnxt_rx_pkt() and other similar locations. Fixes: 67a95e2022c7 ("bnxt_en: Need memory barrier when processing the completion ring.") Reported-by: Lance Richardson <lance.richardson@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Lance Richardson <lance.richardson@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16bnxt_en: Disable aRFS if running on 212 firmwareMichael Chan1-0/+3
212 firmware broke aRFS, so disable it. Traffic may stop after ntuple filters are inserted and deleted by the 212 firmware. Fixes: ae10ae740ad2 ("bnxt_en: Add new hardware RFS mode.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-14ethernet: fix PTP_1588_CLOCK dependenciesArnd Bergmann1-3/+3
The 'imply' keyword does not do what most people think it does, it only politely asks Kconfig to turn on another symbol, but does not prevent it from being disabled manually or built as a loadable module when the user is built-in. In the ICE driver, the latter now causes a link failure: aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_eth_ioctl': ice_main.c:(.text+0x13b0): undefined reference to `ice_ptp_get_ts_config' ice_main.c:(.text+0x13b0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_get_ts_config' aarch64-linux-ld: ice_main.c:(.text+0x13bc): undefined reference to `ice_ptp_set_ts_config' ice_main.c:(.text+0x13bc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_set_ts_config' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_prepare_for_reset': ice_main.c:(.text+0x31fc): undefined reference to `ice_ptp_release' ice_main.c:(.text+0x31fc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_release' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_rebuild': This is a recurring problem in many drivers, and we have discussed it several times befores, without reaching a consensus. I'm providing a link to the previous email thread for reference, which discusses some related problems. To solve the dependency issue better than the 'imply' keyword, introduce a separate Kconfig symbol "CONFIG_PTP_1588_CLOCK_OPTIONAL" that any driver can depend on if it is able to use PTP support when available, but works fine without it. Whenever CONFIG_PTP_1588_CLOCK=m, those drivers are then prevented from being built-in, the same way as with a 'depends on PTP_1588_CLOCK || !PTP_1588_CLOCK' dependency that does the same trick, but that can be rather confusing when you first see it. Since this should cover the dependencies correctly, the IS_REACHABLE() hack in the header is no longer needed now, and can be turned back into a normal IS_ENABLED() check. Any driver that gets the dependency wrong will now cause a link time failure rather than being unable to use PTP support when that is in a loadable module. However, the two recently added ptp_get_vclocks_index() and ptp_convert_timestamp() interfaces are only called from builtin code with ethtool and socket timestamps, so keep the current behavior by stubbing those out completely when PTP is in a loadable module. This should be addressed properly in a follow-up. As Richard suggested, we may want to actually turn PTP support into a 'bool' option later on, preventing it from being a loadable module altogether, which would be one way to solve the problem with the ethtool interface. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Link: https://lore.kernel.org/netdev/20210804121318.337276-1-arnd@kernel.org/ Link: https://lore.kernel.org/netdev/CAK8P3a06enZOf=XyZ+zcAwBczv41UuCTz+=0FMf2gBz1_cOnZQ@mail.gmail.com/ Link: https://lore.kernel.org/netdev/CAK8P3a3=eOxE-K25754+fB_-i_0BZzf9a9RfPTX3ppSwu9WZXw@mail.gmail.com/ Link: https://lore.kernel.org/netdev/20210726084540.3282344-1-arnd@kernel.org/ Acked-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210812183509.1362782-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13bnxt: count Tx dropsJakub Kicinski1-0/+2
Drivers should count packets they are dropping. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13bnxt: make sure xmit_more + errors does not miss doorbellsJakub Kicinski2-13/+27
skbs are freed on error and not put on the ring. We may, however, be in a situation where we're freeing the last skb of a batch, and there is a doorbell ring pending because of xmit_more() being true earlier. Make sure we ring the door bell in such situations. Since errors are rare don't pay attention to xmit_more() and just always flush the pending frames. The busy case should be safe to be left alone because it can only happen if start_xmit races with completions and they both enable the queue. In that case the kick can't be pending. Noticed while reading the code. Fixes: 4d172f21cefe ("bnxt_en: Implement xmit_more.") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13bnxt: disable napi before canceling DIMJakub Kicinski1-2/+1
napi schedules DIM, napi has to be disabled first, then DIM canceled. Noticed while reading the code. Fixes: 0bc0b97fca73 ("bnxt_en: cleanup DIM work on device shutdown") Fixes: 6a8788f25625 ("bnxt_en: add support for software dynamic interrupt moderation") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13bnxt: don't lock the tx queue from napi pollJakub Kicinski1-22/+32
We can't take the tx lock from the napi poll routine, because netpoll can poll napi at any moment, including with the tx lock already held. The tx lock is protecting against two paths - the disable path, and (as Michael points out) the NETDEV_TX_BUSY case which may occur if NAPI completions race with start_xmit and both decide to re-enable the queue. For the disable/ifdown path use synchronize_net() to make sure closing the device does not race we restarting the queues. Annotate accesses to dev_state against data races. For the NAPI cleanup vs start_xmit path - appropriate barriers are already in place in the main spot where Tx queue is stopped but we need to do the same careful dance in the TX_BUSY case. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-27/+68
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-09devlink: Set device as early as possibleLeon Romanovsky1-3/+6
All kernel devlink implementations call to devlink_alloc() during initialization routine for specific device which is used later as a parent device for devlink_register(). Such late device assignment causes to the situation which requires us to call to device_register() before setting other parameters, but that call opens devlink to the world and makes accessible for the netlink users. Any attempt to move devlink_register() to be the last call generates the following error due to access to the devlink->dev pointer. [ 8.758862] devlink_nl_param_fill+0x2e8/0xe50 [ 8.760305] devlink_param_notify+0x6d/0x180 [ 8.760435] __devlink_params_register+0x2f1/0x670 [ 8.760558] devlink_params_register+0x1e/0x20 The simple change of API to set devlink device in the devlink_alloc() instead of devlink_register() fixes all this above and ensures that prior to call to devlink_register() everything already set. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08bnxt_en: Use register window 6 instead of 5 to read the PHCMichael Chan1-2/+2
Some older Broadcom debug tools use window 5 and may conflict, so switch to use window 6 instead. Fixes: 118612d519d8 ("bnxt_en: Add PTP clock APIs, ioctls, and ethtool methods") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08bnxt_en: Update firmware call to retrieve TX PTP timestampMichael Chan3-4/+11
New firmware interface requires the PTP sequence ID header offset to be passed to the firmware to properly find the matching timestamp for all protocols. Fixes: 83bb623c968e ("bnxt_en: Transmit and retrieve packet timestamps") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08bnxt_en: Update firmware interface to 1.10.2.52Michael Chan1-21/+55
The key change is the firmware call to retrieve the PTP TX timestamp. The header offset for the PTP sequence number field is now added. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+2
Build failure in drivers/net/wwan/mhi_wwan_mbim.c: add missing parameter (0, assuming we don't want buffer pre-alloc). Conflict in drivers/net/dsa/sja1105/sja1105_main.c between: 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") Follow the instructions from the commit message of the former commit - removed the if conditions. When looking at commit 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") note that the mask_iotag fields get removed by the following patch. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-05bnx2x: fix an error code in bnx2x_nic_load()Dan Carpenter1-1/+2
Set the error code if bnx2x_alloc_fw_stats_mem() fails. The current code returns success. Fixes: ad5afc89365e ("bnx2x: Separate VF and PF logic") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03bcmgenet: remove call to netdev_boot_setup_checkArnd Bergmann1-2/+0
The driver has never used the netdev->{irq,base_addr,mem_start} members, so this call is completely unnecessary. Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03bnxt_en: Increase maximum RX ring size if jumbo ring is not usedMichael Chan3-8/+22
The current maximum RX ring size is defined assuming the RX jumbo ring (aka aggregation ring) is used. The RX jumbo ring is automicatically used when the MTU exceeds a threshold or when rx-gro-hw/lro is enabled. The RX jumbo ring is automatically sized up to 4 times the size of the RX ring size. The BNXT_MAX_RX_DESC_CNT constant is the upper limit on the size of the RX ring whether or not the RX jumbo ring is used. Obviously, the maximum amount of RX buffer space is significantly less when the RX jumbo ring is not used. To increase flexibility for the user who does not use the RX jumbo ring, we now define a bigger maximum RX ring size when the RX jumbo ring is not used. The maximum RX ring size is now up to 8K when the RX jumbo ring is not used. The maximum completion ring size also needs to be scaled up to accomodate the larger maximum RX ring size. Note that when the RX jumbo ring is re-enabled, the RX ring size will automatically drop if it exceeds the maximum. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03bnxt_en: Don't use static arrays for completion ring pagesMichael Chan2-3/+68
We currently store these page addresses and DMA addreses in static arrays. On systems with 4K pages, we support up to 64 pages per completion ring. The actual number of pages for each completion ring may be much less than 64. For example, when the RX ring size is set to the default 511 entries, only 16 completion ring pages are needed per ring. In the next patch, we'll be doubling the maximum number of completion pages. So we convert to allocate these arrays as needed instead of declaring them statically. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-3/+13
Conflicting commits, all resolutions pretty trivial: drivers/bus/mhi/pci_generic.c 5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU") 56f6f4c4eb2a ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean") drivers/nfc/s3fwrn5/firmware.c a0302ff5906a ("nfc: s3fwrn5: remove unnecessary label") 46573e3ab08f ("nfc: s3fwrn5: fix undefined parameter values in dev_err()") 801e541c79bb ("nfc: s3fwrn5: fix undefined parameter values in dev_err()") MAINTAINERS 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") 8a7b46fa7902 ("MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-30bcm63xx_enet: delete a redundant assignmentTang Bin1-1/+0
In the function bcm_enetsw_probe(), 'ret' will be assigned by bcm_enet_change_mtu(), so 'ret = 0' make no sense. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28bnxt_en: Log if an invalid signal detected on TSIO pinPavan Chebbi2-0/+28
FW can report to driver via ASYNC event if it encountered an invalid signal on any TSIO PIN. Driver will log this event for the user to take corrective action. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Arvind Susarla <arvind.susarla@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28bnxt_en: Event handler for PPS eventsPavan Chebbi3-0/+58
Once the PPS pins are configured, the FW can report PPS values using ASYNC event. This patch adds the ASYNC event handler and subsequent reporting of the events to kernel. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28bnxt_en: 1PPS functions to configure TSIO pinsPavan Chebbi3-2/+178
Application will send ioctls to set/clear PPS pin functions based on user input. This patch implements the driver callbacks that will configure the TSIO pins using firmware commands. After firmware reset, the TSIO pins will be reconfigured again. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28bnxt_en: 1PPS support for 5750X family chipsPavan Chebbi4-1/+113
1PPS (One Pulse Per Second) is a signal generated either by the NIC PHC or an external timing source. Integrating the support to configure and use 1PPS using the TSIO pins along with PTP timestamps will add Grand Master capability to the 5750X family chipsets. This patch initializes the driver data structures and registers the 1PPS with kernel, based on the TSIO pins' capability in the hardware. This will create a /dev/ppsX device which applications can use to receive PPS events. Later patches will define functions to configure and use the pins. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28bnxt_en: Do not read the PTP PHC during chip resetMichael Chan2-11/+35
During error recovery or hot firmware upgrade, the chip may be under reset and the PHC register read cycles may cause completion timeouts. Check that the chip is not under reset condition before proceeding to read the PHC by checking the flag BNXT_STATE_IN_FW_RESET. We also need to take the ptp_lock before we set this flag to prevent race conditions. We need this logic because the PHC now will stay registered after bnxt_close(). Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28bnxt_en: Move bnxt_ptp_init() from bnxt_open() back to bnxt_init_one()Michael Chan2-9/+12
It was pointed out by Richard Cochran that registering the PHC during probe is better than during ifup, so move bnxt_ptp_init() back to bnxt_init_one(). In order to work correctly after firmware reset which may result in PTP config. changes, we modify bnxt_ptp_init() to return if the PHC has been registered earlier. If PTP is no longer supported by the new firmware, we will unregister the PHC and clean up. This partially reverts: d7859afb6880 ("bnxt_en: Move bnxt_ptp_init() to bnxt_open()") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann9-10/+10
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27bnxt_en: Fix static checker warning in bnxt_fw_reset_task()Somnath Kotur1-3/+2
Now that we return when bnxt_open() fails in bnxt_fw_reset_task(), there is no need to check for 'rc' value again before invoking bnxt_reenable_sriov(). Fixes: 3958b1da725a ("bnxt_en: fix error path of FW reset") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-24bnxt_en: Add missing periodic PHC overflow checkMichael Chan2-0/+11
We use the timecounter APIs for the 48-bit PHC and packet timestamps. We must periodically update the timecounter at roughly half the overflow interval. The overflow interval is about 78 hours, so update it every 19 hours (1/4 interval) for some extra margins. Fixes: 390862f45c85 ("bnxt_en: Get the full 48-bit hardware timestamp periodically") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller5-46/+83
Conflicts are simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19bnxt_en: Fix PTP capability discoveryMichael Chan1-1/+5
The current PTP initialization logic does not account for firmware reset that may cause PTP capability to change. The valid pointer bp->ptp_cfg is used to indicate that the device is capable of PTP and that it has been initialized. So we must clean up bp->ptp_cfg and free it if the firmware after reset does not support PTP. Fixes: 93cb62d98e9c ("bnxt_en: Enable hardware PTP support") Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19bnxt_en: Move bnxt_ptp_init() to bnxt_open()Michael Chan3-25/+16
The device needs to be in ifup state for PTP to function, so move bnxt_ptp_init() to bnxt_open(). This means that the PHC will be registered during bnxt_open(). This also makes firmware reset work correctly. PTP configurations may change after firmware upgrade or downgrade. bnxt_open() will be called after firmware reset, so it will work properly. bnxt_ptp_start() is now incorporated into bnxt_ptp_init(). We now also need to call bnxt_ptp_clear() in bnxt_close(). Fixes: 93cb62d98e9c ("bnxt_en: Enable hardware PTP support") Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19bnxt_en: Check abort error state in bnxt_half_open_nic()Somnath Kotur1-0/+6
bnxt_half_open_nic() is called during during ethtool self test and is protected by rtnl_lock. Firmware reset can be happening at the same time. Only critical portions of the entire firmware reset sequence are protected by the rtnl_lock. It is possible that bnxt_half_open_nic() can be called when the firmware reset sequence is aborting. In that case, bnxt_half_open_nic() needs to check if the ABORT_ERR flag is set and abort if it is. The ethtool self test will fail but the NIC will be brought to a consistent IF_DOWN state. Without this patch, if bnxt_half_open_nic() were to continue in this error state, it may crash like this: bnxt_en 0000:82:00.1 enp130s0f1np1: FW reset in progress during close, FW reset will be aborted Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... Process ethtool (pid: 333327, stack limit = 0x0000000046476577) Call trace: bnxt_alloc_mem+0x444/0xef0 [bnxt_en] bnxt_half_open_nic+0x24/0xb8 [bnxt_en] bnxt_self_test+0x2dc/0x390 [bnxt_en] ethtool_self_test+0xe0/0x1f8 dev_ethtool+0x1744/0x22d0 dev_ioctl+0x190/0x3e0 sock_ioctl+0x238/0x480 do_vfs_ioctl+0xc4/0x758 ksys_ioctl+0x84/0xb8 __arm64_sys_ioctl+0x28/0x38 el0_svc_handler+0xb0/0x180 el0_svc+0x8/0xc Fixes: a1301f08c5ac ("bnxt_en: Check abort error state in bnxt_open_nic().") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19bnxt_en: Validate vlan protocol ID on RX packetsMichael Chan1-5/+16
Only pass supported VLAN protocol IDs for stripped VLAN tags to the stack. The stack will hit WARN() if the protocol ID is unsupported. Existing firmware sets up the chip to strip 0x8100, 0x88a8, 0x9100. Only the 1st two protocols are supported by the kernel. Fixes: a196e96bb68f ("bnxt_en: clean up VLAN feature bit handling") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19bnxt_en: fix error path of FW resetSomnath Kotur1-10/+21
When bnxt_open() fails in the firmware reset path, the driver needs to gracefully abort, but it is executing code that should be invoked only in the success path. Define a function to abort FW reset and consolidate all error paths to call this new function. Fixes: dab62e7c2de7 ("bnxt_en: Implement faster recovery for firmware fatal error.") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19bnxt_en: Add missing check for BNXT_STATE_ABORT_ERR in bnxt_fw_rset_task()Michael Chan1-0/+4
In the BNXT_FW_RESET_STATE_POLL_VF state in bnxt_fw_reset_task() after all VFs have unregistered, we need to check for BNXT_STATE_ABORT_ERR after we acquire the rtnl_lock. If the flag is set, we need to abort. Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19bnxt_en: Refresh RoCE capabilities in bnxt_ulp_probe()Michael Chan1-4/+5
The capabilities can change after firmware upgrade/downgrade, so we should get the up-to-date RoCE capabilities everytime bnxt_ulp_probe() is called. Fixes: 2151fe0830fd ("bnxt_en: Handle RESET_NOTIFY async event from firmware.") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19bnxt_en: reject ETS settings that will starve a TCEdwin Peer1-1/+9
ETS proportions are presented to HWRM_QUEUE_COS2BW_CFG as minimum bandwidth constraints. Thus, zero is a legal value for a given TC. However, if all the other TCs sum up to 100%, then at least one hardware queue will starve, resulting in guaranteed TX timeouts. Reject such nonsensical configurations. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19bnxt_en: don't disable an already disabled PCI deviceKalesh AP1-1/+2
If device is already disabled in reset path and PCI io error is detected before the device could be enabled, driver could call pci_disable_device() for already disabled device. Fix this problem by calling pci_disable_device() only if the device is already enabled. Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.") Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16bnx2x: remove unused variable 'cur_data_offset'Bill Wendling1-6/+0
Fix the clang build warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1862:13: error: variable 'cur_data_offset' set but not used [-Werror,-Wunused-but-set-variable] dma_addr_t cur_data_offset; Signed-off-by: Bill Wendling <morbo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-09net: bcmgenet: Ensure all TX/RX queues DMAs are disabledFlorian Fainelli1-0/+6
Make sure that we disable each of the TX and RX queues in the TDMA and RDMA control registers. This is a correctness change to be symmetrical with the code that enables the TX and RX queues. Tested-by: Maxime Ripard <maxime@cerno.tech> Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clearDoug Berger2-21/+2
Setting the EXT_ENERGY_DET_MASK bit allows the port energy detection logic of the internal PHY to prevent the system from sleeping. Some internal PHYs will report that energy is detected when the network interface is closed which can prevent the system from going to sleep if WoL is enabled when the interface is brought down. Since the driver does not support waking the system on this logic, this commit clears the bit whenever the internal PHY is powered up and the other logic for manipulating the bit is removed since it serves no useful function. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01Merge tag 'net-next-5.14' of ↵Linus Torvalds19-87/+1386
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - BPF: - add syscall program type and libbpf support for generating instructions and bindings for in-kernel BPF loaders (BPF loaders for BPF), this is a stepping stone for signed BPF programs - infrastructure to migrate TCP child sockets from one listener to another in the same reuseport group/map to improve flexibility of service hand-off/restart - add broadcast support to XDP redirect - allow bypass of the lockless qdisc to improving performance (for pktgen: +23% with one thread, +44% with 2 threads) - add a simpler version of "DO_ONCE()" which does not require jump labels, intended for slow-path usage - virtio/vsock: introduce SOCK_SEQPACKET support - add getsocketopt to retrieve netns cookie - ip: treat lowest address of a IPv4 subnet as ordinary unicast address allowing reclaiming of precious IPv4 addresses - ipv6: use prandom_u32() for ID generation - ip: add support for more flexible field selection for hashing across multi-path routes (w/ offload to mlxsw) - icmp: add support for extended RFC 8335 PROBE (ping) - seg6: add support for SRv6 End.DT46 behavior - mptcp: - DSS checksum support (RFC 8684) to detect middlebox meddling - support Connection-time 'C' flag - time stamping support - sctp: packetization Layer Path MTU Discovery (RFC 8899) - xfrm: speed up state addition with seq set - WiFi: - hidden AP discovery on 6 GHz and other HE 6 GHz improvements - aggregation handling improvements for some drivers - minstrel improvements for no-ack frames - deferred rate control for TXQs to improve reaction times - switch from round robin to virtual time-based airtime scheduler - add trace points: - tcp checksum errors - openvswitch - action execution, upcalls - socket errors via sk_error_report Device APIs: - devlink: add rate API for hierarchical control of max egress rate of virtual devices (VFs, SFs etc.) - don't require RCU read lock to be held around BPF hooks in NAPI context - page_pool: generic buffer recycling New hardware/drivers: - mobile: - iosm: PCIe Driver for Intel M.2 Modem - support for Qualcomm MSM8998 (ipa) - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU) - NXP SJA1110 Automotive Ethernet 10-port switch - Qualcomm QCA8327 switch support (qca8k) - Mikrotik 10/25G NIC (atl1c) Driver changes: - ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP (our first foray into MAC/PHY description via ACPI) - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx - Mellanox/Nvidia NIC (mlx5) - NIC VF offload of L2 bridging - support IRQ distribution to Sub-functions - Marvell (prestera): - add flower and match all - devlink trap - link aggregation - Netronome (nfp): connection tracking offload - Intel 1GE (igc): add AF_XDP support - Marvell DPU (octeontx2): ingress ratelimit offload - Google vNIC (gve): new ring/descriptor format support - Qualcomm mobile (rmnet & ipa): inline checksum offload support - MediaTek WiFi (mt76) - mt7915 MSI support - mt7915 Tx status reporting - mt7915 thermal sensors support - mt7921 decapsulation offload - mt7921 enable runtime pm and deep sleep - Realtek WiFi (rtw88) - beacon filter support - Tx antenna path diversity support - firmware crash information via devcoredump - Qualcomm WiFi (wcn36xx) - Wake-on-WLAN support with magic packets and GTK rekeying - Micrel PHY (ksz886x/ksz8081): add cable test support" * tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits) tcp: change ICSK_CA_PRIV_SIZE definition tcp_yeah: check struct yeah size at compile time gve: DQO: Fix off by one in gve_rx_dqo() stmmac: intel: set PCI_D3hot in suspend stmmac: intel: Enable PHY WOL option in EHL net: stmmac: option to enable PHY WOL with PMT enabled net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del} net: use netdev_info in ndo_dflt_fdb_{add,del} ptp: Set lookup cookie when creating a PTP PPS source. net: sock: add trace for socket errors net: sock: introduce sk_error_report net: dsa: replay the local bridge FDB entries pointing to the bridge dev too net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev net: dsa: include fdb entries pointing to bridge in the host fdb list net: dsa: include bridge addresses which are local in the host fdb list net: dsa: sync static FDB entries on foreign interfaces to hardware net: dsa: install the host MDB and FDB entries in the master's RX filter net: dsa: reference count the FDB addresses at the cross-chip notifier level net: dsa: introduce a separate cross-chip notifier type for host FDBs net: dsa: reference count the MDB entries at the cross-chip notifier level ...
2021-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+3
Trivial conflict in net/netfilter/nf_tables_api.c. Duplicate fix in tools/testing/selftests/net/devlink_port_split.py - take the net-next version. skmsg, and L4 bpf - keep the bpf code but remove the flags and err params. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-29Merge tag 'fallthrough-fixes-clang-5.14-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fixes from Gustavo Silva: "Fix many fall-through warnings when building with Clang 12.0.0 and '-Wimplicit-fallthrough' so that we at some point will be able to enable that warning by default" * tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (26 commits) rxrpc: Fix fall-through warnings for Clang drm/nouveau/clk: Fix fall-through warnings for Clang drm/nouveau/therm: Fix fall-through warnings for Clang drm/nouveau: Fix fall-through warnings for Clang xfs: Fix fall-through warnings for Clang xfrm: Fix fall-through warnings for Clang tipc: Fix fall-through warnings for Clang sctp: Fix fall-through warnings for Clang rds: Fix fall-through warnings for Clang net/packet: Fix fall-through warnings for Clang net: netrom: Fix fall-through warnings for Clang ide: Fix fall-through warnings for Clang hwmon: (max6621) Fix fall-through warnings for Clang hwmon: (corsair-cpro) Fix fall-through warnings for Clang firewire: core: Fix fall-through warnings for Clang braille_console: Fix fall-through warnings for Clang ipv4: Fix fall-through warnings for Clang qlcnic: Fix fall-through warnings for Clang bnxt_en: Fix fall-through warnings for Clang netxen_nic: Fix fall-through warnings for Clang ...
2021-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-2/+0
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-06-28 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 12 day(s) which contain a total of 56 files changed, 394 insertions(+), 380 deletions(-). The main changes are: 1) XDP driver RCU cleanups, from Toke Høiland-Jørgensen and Paul E. McKenney. 2) Fix bpf_skb_change_proto() IPv4/v6 GSO handling, from Maciej Żenczykowski. 3) Fix false positive kmemleak report for BPF ringbuf alloc, from Rustam Kovhaev. 4) Fix x86 JIT's extable offset calculation for PROBE_LDX NULL, from Ravi Bangoria. 5) Enable libbpf fallback probing with tracing under RHEL7, from Jonathan Edwards. 6) Clean up x86 JIT to remove unused cnt tracking from EMIT macro, from Jiri Olsa. 7) Netlink cleanups for libbpf to please Coverity, from Kumar Kartikeya Dwivedi. 8) Allow to retrieve ancestor cgroup id in tracing programs, from Namhyung Kim. 9) Fix lirc BPF program query to use user-provided prog_cnt, from Sean Young. 10) Add initial libbpf doc including generated kdoc for its API, from Grant Seltzer. 11) Make xdp_rxq_info_unreg_mem_model() more robust, from Jakub Kicinski. 12) Fix up bpfilter startup log-level to info level, from Gary Lin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28bnxt_en: Enable hardware PTP supportMichael Chan1-0/+7
Call bnxt_ptp_init() to initialize and register with the clock driver to enable PTP support. Call bnxt_ptp_free() to unregister and clean up during shutdown. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28bnxt_en: Transmit and retrieve packet timestampsPavan Chebbi4-5/+131
Setup the TXBD to enable TX timestamp if requested. At TX packet DMA completion, if we requested TX timestamp on that packet, we defer to .do_aux_work() to obtain the TX timestamp from the firmware before we free the TX SKB. v2: Use .do_aux_work() to get the TX timestamp from firmware. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28bnxt_en: Get the RX packet timestampPavan Chebbi4-3/+52
If the RX packet is timestamped by the hardware, the RX completion record will contain the lower 32-bit of the timestamp. This needs to be combined with the upper 16-bit of the periodic timestamp that we get from the timer. The previous snapshot in ptp->old_timer is used to make sure that the snapshot is not ahead of the RX timestamp and we adjust for wrap-around if needed. v2: Make ptp->old_time read access safe on 32-bit CPUs. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28bnxt_en: Get the full 48-bit hardware timestamp periodicallyPavan Chebbi3-0/+41
From the bnxt_timer(), read the 48-bit hardware running clock periodically and store it in ptp->current_time. The previous snapshot of the clock will be stored in ptp->old_time. The old_time snapshot will be used in the next patches to compute the RX packet timestamps. v2: Use .do_aux_work() to read the timer periodically. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-11 10:38:56 +0300