summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h
AgeCommit message (Collapse)AuthorFilesLines
2022-08-16RDMA/cxgb4: fix accept failure due to increased cpl_t5_pass_accept_rpl sizePotnuri Bharat Teja1-1/+1
Commit 'c2ed5611afd7' has increased the cpl_t5_pass_accept_rpl{} structure size by 8B to avoid roundup. cpl_t5_pass_accept_rpl{} is a HW specific structure and increasing its size will lead to unwanted adapter errors. Current commit reverts the cpl_t5_pass_accept_rpl{} back to its original and allocates zeroed skb buffer there by avoiding the memset for iss field. Reorder code to minimize chip type checks. Fixes: c2ed5611afd7 ("iw_cxgb4: Use memset_startat() for cpl_t5_pass_accept_rpl") Link: https://lore.kernel.org/r/20220809184118.2029-1-rahul.lakkireddy@chelsio.com Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2021-12-15iw_cxgb4: Use memset_startat() for cpl_t5_pass_accept_rplKees Cook1-1/+1
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring fields. Use memset_startat() so memset() doesn't get confused about writing beyond the destination member that is intended to be the starting point of zeroing through the end of the struct. Additionally, since everything appears to perform a roundup (including allocation), just change the size of the struct itself and add a build-time check to validate the expected size. Link: https://lore.kernel.org/r/20211213223331.135412-13-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-03-09cxgb4/chcr: complete record tx handlingRohit Maheshwari1-0/+20
Added tx handling in this patch. This includes handling of segments contain single complete record. v1->v2: - chcr_write_cpl_set_tcb_ulp is added in this patch. v3->v4: - mss calculation logic. - replaced kfree_skb with dev_kfree_skb_any. - corrected error message reported by kbuild test robot <lkp@intel.com> Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09cxgb4/chcr: Save tx keys and handle HW responseRohit Maheshwari1-0/+8
As part of this patch generated and saved crypto keys, handled HW response of act_open_req and set_tcb_req. Defined connection state update. v1->v2: - optimized tcb update using control queue. - state machine handling when earlier states received. v2->v3: - Added one empty line after function declaration. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-25chelsio: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07cxgb4: add Tx and Rx path for ETHOFLD trafficRahul Lakkireddy1-0/+5
Implement Tx path for traffic flowing through software EOSW_TXQ and EOHW_TXQ. Since multiple EOSW_TXQ can post packets to a single EOHW_TXQ, protect the hardware queue with necessary spinlock. Also, move common code used to generate TSO work request to a common function. Implement Rx path to handle Tx completions for successfully transmitted packets. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09cxgb4: add tcb flags and tcb rpl structRaju Rangoju1-0/+8
This patch adds the tcb flags and structures needed for querying tcb information. Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-15crypto/chelsio/chtls: macro correction in tx pathAtul Gupta1-0/+3
corrected macro used in tx path. removed redundant hdrlen and check for !page in chtls_sendmsg Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11cxgb4: fix abort_req_rss6 structSteve Wise1-1/+0
Remove the incorrect WR_HDR field which can cause a misinterpretation of ABORT CPL by ULDs, such as iw_cxgb4. Fixes: a3cdaa69e4ae ("cxgb4: Adds CPL support for Shared Receive Queues") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-01rdma/cxgb4: Fix SRQ endianness annotationsBart Van Assche1-2/+2
This patch avoids that sparse complains about casts to restricted __be32. Fixes: a3cdaa69e4ae ("cxgb4: Adds CPL support for Shared Receive Queues") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-11cxgb4: enable inner header checksum calculationGanesh Goudar1-0/+5
set cntrl bits to indicate whether inner header checksum needs to be calculated whenever the packet is an encapsulated packet and enable supported encap features. Fixes: d0a1299c6bf7 ("cxgb4: add support for vxlan segmentation offload") Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01cxgb4: Inline TLS FW InterfaceAtul Gupta1-2/+120
Key area size in hw-config file. CPL struct for TLS request and response. Work request for Inline TLS. Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Reviewed-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22cxgb4: Adds CPL support for Shared Receive QueuesRaju Rangoju1-0/+71
- Add srq table query cpl support for srq - Add cpl_abort_req_rss6 and cpl_abort_rpl_rss6 structs. - Add accessors, macros to get the SRQ IDX value. Signed-off-by: Raju Rangoju <rajur@chelsio.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11cxgb4: add data structures to support vxlanGanesh Goudar1-0/+164
Add data structures and macros to be used in vxlan offload. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01cxgb4: add support to create hash filtersKumar Sanghvi1-0/+5
Add support to create hash (exact-match) filters based on the value of 'hash' field in ch_filter_specification. Allocate SMT/L2T entries if DMAC-rewrite/SMAC-rewrite is requested. Allocate CLIP entry in case of IPv6 filter. Use cpl_act_open_req[6] to send hash filter create request to hw. Also, the filter tuple is calculated as part of sending this request. Hash-filter reply is processed on getting cpl_act_open_rpl. In case of success, various bits/fields in filter-tcb are set per filter requirement, such as enabling filter hitcnts, and/or various header rewrite operations, such as VLAN-rewrite, NAT or (L3/L4)-rewrite, and SMAC/DMAC-rewrite. In case of failure, clear the filter entry and release any hw resources occupied by it. The patch also moves the functions set_tcb_field, set_tcb_tflag and configure_filter_smac towards beginning of file. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20cxgb4: introduce SMT ops to prepare for SMAC rewrite supportKumar Sanghvi1-2/+42
Introduce SMT operations for allocating/removing entries from SMAC table. Make TCAM filters use the SMT ops whenever SMAC rewrite is required. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-05cxgb4: time stamping interface for PTPAtul Gupta1-0/+28
Supports hardware and software time stamping via the Linux SO_TIMESTAMPING socket option. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-03Merge branch 'for-next' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - enable dual mode (initiator + target) qla2xxx operation. (Quinn + Himanshu) - add a framework for qla2xxx async fabric discovery. (Quinn + Himanshu) - enable iscsi PDU DDP completion offload in cxgbit/T6 NICs. (Varun) - fix target-core handling of aborted failed commands. (Bart) - fix a long standing target-core issue NULL pointer dereference with active I/O LUN shutdown. (Rob Millner + Bryant + nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (44 commits) target: Add counters for ABORT_TASK success + failure iscsi-target: Fix early login failure statistics misses target: Fix NULL dereference during LUN lookup + active I/O shutdown target: Delete tmr from list before processing target: Fix handling of aborted failed commands uapi: fix linux/target_core_user.h userspace compilation errors target: export protocol identifier qla2xxx: Fix a warning reported by the "smatch" static checker target/iscsi: Fix unsolicited data seq_end_offset calculation target/cxgbit: add T6 iSCSI DDP completion feature target/cxgbit: Enable DDP for T6 only if data sequence and pdu are in order target/cxgbit: Use T6 specific macros to get ETH/IP hdr len target/cxgbit: use cxgb4_tp_smt_idx() to get smt idx target/iscsi: split iscsit_check_dataout_hdr() target: Remove command flag CMD_T_DEV_ACTIVE target: Remove command flag CMD_T_BUSY target: Move session check from target_put_sess_cmd() into target_release_cmd_kref() target: Inline transport_cmd_check_stop() target: Remove an overly chatty debug message target: Stop execution if CMD_T_STOP has been set ...
2017-02-09target/cxgbit: Use T6 specific macro to set the force bitVarun Prakash1-0/+4
For T6 adapters use T6 specific macro to set the force bit. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-04cxgb4: Support compressed error vector for T6Arjun V1-0/+15
t6fw-1.15.15.0 enabled compressed error vector in cpl_rx_pkt for T6. Updating driver to take care of these changes. Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Arjun V <arjun@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-14scsi: cxgb4i: libcxgbi: cxgb4: add T6 iSCSI completion featureVarun Prakash1-0/+13
T6 adapters reduce number of completions to host by generating single completion for all the directly placed(DDP) iSCSI pdus in a sequence. This patch adds new structure for completion hw cmd (struct cpl_rx_iscsi_cmp) and implements T6 completion feature. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-19cxgb4: Register changes and fw defines for cryptoHariprasad Shenai1-0/+437
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23RDMA/iw_cxgb4: Add missing error codes for act open cmdHariprasad S1-0/+2
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-14RDMA/iw_cxgb4: set the correct FID value in DSGL commandsHariprasad S1-0/+4
The FID value in a ULP_MEMIO command needs to be set to an IQ ID of a queue configured for our PF. The FID/IQ id is used to index into the PCIE FID table, to find out on which function the DMA needs to be issued. Essentially, every DMA needs to have the ingress queue. The exact ingress queue doesn't matter, but it needs to be an ingress queue associated with the function you want to see the DMA on. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-24Merge branch 'for-next-merge' of ↵Linus Torvalds1-0/+217
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull more SCSI target updates from Nicholas Bellinger: "This series contains cxgb4 driver prerequisites for supporting iscsi segmentation offload (ISO), that will be utilized for a number of future v4.7 developments in iscsi-target for supporting generic hw offloads" * 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: cxgb4: update Kconfig and Makefile cxgb4: add iSCSI DDP page pod manager cxgb4, iw_cxgb4: move delayed ack macro definitions cxgb4: move VLAN_NONE macro definition cxgb4: update struct cxgb4_lld_info definition cxgb4: add definitions for iSCSI target ULD cxgb4, cxgb4i: move struct cpl_rx_data_ddp definition cxgb4, iw_cxgb4, cxgb4i: remove duplicate definitions cxgb4, iw_cxgb4: move definitions to common header file cxgb4: large receive offload support cxgb4: allocate resources for CXGB4_ULD_ISCSIT cxgb4: add new ULD type CXGB4_ULD_ISCSIT
2016-03-22cxgb4, iw_cxgb4: move delayed ack macro definitionsVarun Prakash1-0/+9
move delayed ack macro definitions to common header file t4_msg.h. Signed-off-by: Varun Prakash <varun@chelsio.com> Acked-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-22cxgb4: add definitions for iSCSI target ULDVarun Prakash1-0/+107
add structure, macro and constant definitions for iSCSI Tx and Rx. Signed-off-by: Varun Prakash <varun@chelsio.com> Acked-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-22cxgb4, cxgb4i: move struct cpl_rx_data_ddp definitionVarun Prakash1-0/+15
move struct cpl_rx_data_ddp definition to common header file t4_msg.h. Signed-off-by: Varun Prakash <varun@chelsio.com> Acked-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-22cxgb4, iw_cxgb4, cxgb4i: remove duplicate definitionsVarun Prakash1-0/+5
move struct ulptx_idata definition to common header file t4_msg.h. Signed-off-by: Varun Prakash <varun@chelsio.com> Acked-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-22cxgb4, iw_cxgb4: move definitions to common header fileVarun Prakash1-0/+81
move struct tcp_options, struct cpl_pass_accept_req, enum defining congestion control algorithms and associated macros to common header file t4_msg.h Signed-off-by: Varun Prakash <varun@chelsio.com> Acked-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-01cxgb4/iw_cxgb4: TOS supportHariprasad S1-0/+2
This series provides support for iWARP applications to specify a TOS value and have that map to a VLAN Priority for iw_cxgb4 iWARP connections. In iw_cxgb4, when allocating an L2T entry, pass the skb_priority based on the tos value in the cm_id. Also pass the correct tos value during connection setup so the passive side gets the client's desired tos. When sending the FLOWC work request to FW, if the egress device is in a vlan, then use the vlan priority bits as the scheduling class. This allows associating RDMA connections with scheduling classes to provide traffic shaping per flow. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-22cxgb4: T6 adapter lld support for iw_cxgb4 driverHariprasad S1-0/+48
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-21cxgb4 : Fill DCB priority in vlan control headersAnish Bhatt1-0/+3
Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02cxgb4: Adds support for T6 adapterHariprasad Shenai1-0/+3
Adds NIC driver related changes for T6 adapter. Register related changes, MC related changes, VF related changes, doorbell related changes, debugfs changes, etc Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13cxgb4/cxgb4vf: Cleanup macros, add comments and add new MACROSHariprasad Shenai1-25/+58
Cleanup few MACROS left out in t4_hw.h to be consistent with the existing ones. Also replace few hardcoded values with MACROS. Also update comments for some code Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-24cxgb4: add cxgb4_fcoe.h and macro definitions for FCoEVarun Prakash1-0/+25
This patch adds new header file cxgb4_fcoe.h and defines new macros for FCoE support in cxgb4 driver. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13iw_cxgb4/cxgb4/cxgb4vf/cxgb4i/csiostor: Cleanup register defines/macros ↵Hariprasad Shenai1-58/+141
related to all other cpl messages This patch cleanups all other macros/register define related to CPL messages that are defined in t4_msg.h and the affected files Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13iw_cxgb4/cxgb4/cxgb4i: Cleanup register defines/MACROS related to CM CPL ↵Hariprasad Shenai1-36/+132
messages This patch cleanups all macros/register define related to connection management CPL messages that are defined in t4_msg.h and the affected files Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13cxgb4i/cxgb4 : Refactor macros to conform to uniform standardsAnish Bhatt1-34/+86
Refactored all macros used in cxgb4i as part of previously started cxgb4 macro names cleanup. Makes them more uniform and avoids namespace collision. Minor changes in other drivers where required as some of these macros are used by multiple drivers, affected drivers are iw_cxgb4, cxgb4(vf) & csiostor Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-10cxgb4/cxgb4vf: Updated the LSO transfer length in CPL_TX_PKT_LSO for T5Hariprasad Shenai1-0/+1
Update the lso length for T5 adapter and fix PIDX_T5 macro Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-06cxgb4i : Move stray CPL definitions to cxgb4 driverAnish Bhatt1-0/+2
These belong to the t4 msg header, will ensure there is no accidental code duplication in the future Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-18cxgb4: Export symbols required by cxgb4i for ipv6 support and required definesAnish Bhatt1-0/+2
Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-18cxgb4/iw_cxgb4: Move common defines to cxgb4Anish Bhatt1-0/+1
This define is used by cxgb4i and iw_cxgb4, moving to avoid code duplication Signed-off-by: Anish Bhatt <anish@chelsio.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-23cxgb4 : Update copyright year on all cxgb4 filesAnish Bhatt1-1/+1
Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11iw_cxgb4: don't truncate the recv window sizeHariprasad Shenai1-0/+1
Fixed a bug that shows up with recv window sizes that exceed the size of the RCV_BUFSIZ field in opt0 (>= 1024K). If the recv window exceeds this, then we specify the max possible in opt0, add add the rest in via a RX_DATA_ACK credits. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11iw_cxgb4: Choose appropriate hw mtu index and ISS for iWARP connectionsHariprasad Shenai1-0/+9
Select the appropriate hw mtu index and initial sequence number to optimize hw memory performance. Add new cxgb4_best_aligned_mtu() which allows callers to provide enough information to be used to [possibly] select an MTU which will result in the TCP Data Segment Size (AKA Maximum Segment Size) to be an aligned value. If an RTR message exhange is required, then align the ISS to 8B - 1 + 4, so that after the SYN the send seqno will align on a 4B boundary. The RTR message exchange will leave the send seqno aligned on an 8B boundary. If an RTR is not required, then align the ISS to 8B - 1. The goal is to have the send seqno be 8B aligned when we send the first FPDU. Based on original work by Casey Leedom <leeedom@chelsio.com> and Steve Wise <swise@opengridcomputing.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15cxgb4/iw_cxgb4: Treat CPL_ERR_KEEPALV_NEG_ADVICE as negative adviceSteve Wise1-0/+1
Based on original work by Anand Priyadarshee <anandp@chelsio.com>. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-12cxgb4: Add routines to create and remove listening IPv6 serversVipul Pandya1-1/+16
Add cxgb4_create_server6 and cxgb4_remove_server routines to create and remove listening IPv6 servers. Return success (0) from cxgb4_create_server in case of ctrl queue congestion since in case of congestion, passive open request gets queued and gets processed later. If a non-zero value were returned it would be treated as an error and the ULD would free STID, which can result in an error in passive open reply. Add cpl structure for active open request with IPv6 address for T5. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-29cxgb4vf: Support CPL_SGE_EGR_UPDATEs encapsulated in a CPL_FW4_MSGVipul Pandya1-0/+1
Newer firmware can post CPL_SGE_EGR_UPDATE message encapsulated in a CPL_FW4_MSG as follows flit0 rss_header (if DropRSS == 0 in IQ context) flit1 CPL_FW4_MSG cpl flit2 rss_header w/opcode CPL_SGE_EGR_UPDATE flit3 CPL_SGE_EGR_UPDATE cpl So FW4_MSG CPLs with a newly created type of FW_TYPE_RSSCPL have the CPL_SGE_EGR_UPDATE CPL message in flit 2 of the FW4_MSG. Firmware can still post regular CPL_SGE_EGR_UPDATE messages, so the drivers need to handle both. This patch also writes a new parameter to firmware requesting encapsulated EGR_UPDATE. This allows firmware with this support to not break older drivers. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29cxgb4: Support CPL_SGE_EGR_UPDATEs encapsulated in a CPL_FW4_MSGVipul Pandya1-0/+10
Newer firmware can post CPL_SGE_EGR_UPDATE message encapsulated in a CPL_FW4_MSG as follows flit0 rss_header (if DropRSS == 0 in IQ context) flit1 CPL_FW4_MSG cpl flit2 rss_header w/opcode CPL_SGE_EGR_UPDATE flit3 CPL_SGE_EGR_UPDATE cpl So FW4_MSG CPLs with a newly created type of FW_TYPE_RSSCPL have the CPL_SGE_EGR_UPDATE CPL message in flit 2 of the FW4_MSG. Firmware can still post regular CPL_SGE_EGR_UPDATE messages, so the drivers need to handle both. This patch also writes a new parameter to firmware requesting encapsulated EGR_UPDATE. This allows firmware with this support to not break older drivers. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-20 14:54:05 +0300