summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ice/ice.h
AgeCommit message (Collapse)AuthorFilesLines
2024-06-06ice: map XDP queues to vectors in ice_vsi_map_rings_to_vectors()Larysa Zaremba1-0/+1
ice_pf_dcb_recfg() re-maps queues to vectors with ice_vsi_map_rings_to_vectors(), which does not restore the previous state for XDP queues. This leads to no AF_XDP traffic after rebuild. Map XDP queues to vectors in ice_vsi_map_rings_to_vectors(). Also, move the code around, so XDP queues are mapped independently only through .ndo_bpf(). Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-5-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-06ice: add flag to distinguish reset from .ndo_bpf in XDP rings configLarysa Zaremba1-2/+9
Commit 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") has placed ice_vsi_free_q_vectors() after ice_destroy_xdp_rings() in the rebuild process. The behaviour of the XDP rings config functions is context-dependent, so the change of order has led to ice_destroy_xdp_rings() doing additional work and removing XDP prog, when it was supposed to be preserved. Also, dependency on the PF state reset flags creates an additional, fortunately less common problem: * PFR is requested e.g. by tx_timeout handler * .ndo_bpf() is asked to delete the program, calls ice_destroy_xdp_rings(), but reset flag is set, so rings are destroyed without deleting the program * ice_vsi_rebuild tries to delete non-existent XDP rings, because the program is still on the VSI * system crashes With a similar race, when requested to attach a program, ice_prepare_xdp_rings() can actually skip setting the program in the VSI and nevertheless report success. Instead of reverting to the old order of function calls, add an enum argument to both ice_prepare_xdp_rings() and ice_destroy_xdp_rings() in order to distinguish between calls from rebuild and .ndo_bpf(). Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-4-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-06ice: remove af_xdp_zc_qps bitmapLarysa Zaremba1-11/+21
Referenced commit has introduced a bitmap to distinguish between ZC and copy-mode AF_XDP queues, because xsk_get_pool_from_qid() does not do this for us. The bitmap would be especially useful when restoring previous state after rebuild, if only it was not reallocated in the process. This leads to e.g. xdpsock dying after changing number of queues. Instead of preserving the bitmap during the rebuild, remove it completely and distinguish between ZC and copy-mode queues based on the presence of a device associated with the pool. Fixes: e102db780e1c ("ice: track AF_XDP ZC enabled queues in bitmap") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-3-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-06ice: refactor struct ice_vsi_cfg_params to be inside of struct ice_vsiMateusz Polchlopek1-6/+8
Refactor struct ice_vsi_cfg_params to be embedded into struct ice_vsi. Prior to that the members of the struct were scattered around ice_vsi, and were copy-pasted for purposes of reinit. Now we have struct handy, and it is easier to have something sticky in the flags field. Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Vaishnavi Tipireddy <vaishnavi.tipireddy@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-12ice: store VF relative MSI-X index in q_vector->vf_reg_idxJacob Keller1-1/+2
The ice physical function driver needs to configure the association of queues and interrupts on behalf of its virtual functions. This is done over virtchnl by the VF sending messages during its initialization phase. These messages contain a vector_id which the VF wants to associate with a given queue. This ID is relative to the VF space, where 0 indicates the control IRQ for non-queue interrupts. When programming the mapping, the PF driver currently passes this vector_id directly to the low level functions for programming. This works for SR-IOV, because the hardware uses the VF-based indexing for interrupts. This won't work for Scalable IOV, which uses PF-based indexing for programming its VSIs. To handle this, the driver needs to be able to look up the proper index to use for programming. For typical IRQs, this would be the q_vector->reg_idx field. The q_vector->reg_idx can't be set to a VF relative value, because it is used when the PF needs to control the interrupt, such as when triggering a software interrupt on stopping the Tx queue. Thus, introduce a new q_vector->vf_reg_idx which can store the VF relative index for registers which expect this. Use this in ice_cfg_interrupt to look up the VF index from the q_vector. This allows removing the vector ID parameter of ice_cfg_interrupt. Also notice that this function returns an int, but then is cast to the virtchnl error enumeration, virtchnl_status_code. Update the return type to indicate it does not return an integer error code. We can't use normal error codes here because the return values are passed across the virtchnl interface. This will allow the future Scalable IOV VFs to correctly look up the index needed for programming the VF queues without breaking SR-IOV. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-01ice: add ice_adapter for shared data across PFs on the same NICMichal Schmidt1-0/+2
There is a need for synchronization between ice PFs on the same physical adapter. Add a "struct ice_adapter" for holding data shared between PFs of the same multifunction PCI device. The struct is refcounted - each ice_pf holds a reference to it. Its first use will be for PTP. I expect it will be useful also to improve the ugliness that is ice_prot_id_tbl. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25ice: remove switchdev control plane VSIMichal Swiatkowski1-1/+0
For slow-path Rx and Tx PF VSI is used. There is no need to have control plane VSI. Remove all code related to it. Eswitch rebuild can't fail without rebuilding control plane VSI. Return void from ice_eswitch_rebuild(). Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25ice: remove eswitch changing queues algorithmMichal Swiatkowski1-6/+0
Changing queues used by eswitch will be done through PF netdev. There is no need to reserve queues if the number of used queues is known. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12ice: Fix debugfs with devlink reloadWojciech Drewek1-0/+1
During devlink reload it is needed to remove debugfs entries correlated with only one PF. ice_debugfs_exit() removes all entries created by ice driver so we can't use it. Introduce ice_debugfs_pf_deinit() in order to release PF's debugfs entries. Move ice_debugfs_exit() call to ice_module_exit(), it makes more sense since ice_debugfs_init() is called in ice_module_init() and not in ice_probe(). Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12ice: Remove and readd netdev during devlink reloadWojciech Drewek1-0/+2
Recent changes to the devlink reload (commit 9b2348e2d6c9 ("devlink: warn about existing entities during reload-reinit")) force the drivers to destroy devlink ports during reinit. Adjust ice driver to this requirement, unregister netdvice, destroy devlink port. ice_init_eth() was removed and all the common code between probe and reload was moved to ice_load(). During devlink reload we can't take devl_lock (it's already taken) and in ice_probe() we have to lock it. Use devl_* variant of the API which does not acquire and release devl_lock. Guard ice_load() with devl_lock only in case of probe. Suggested-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-02ice: Add a new counter for Rx EIPE errorsAniruddha Paul1-0/+1
HW incorrectly reports EIPE errors on encapsulated packets with L2 padding inside inner packet. HW shows outer UDP/IPV4 packet checksum errors as part of the EIPE flags of the Rx descriptor. These are reported only if checksum offload is enabled and L3/L4 parsed flag is valid in Rx descriptor. When that error is reported by HW, we don't act on it instead of incrementing main Rx errors statistic as it would normally happen. Add a new statistic to count these errors since we still want to print them. Signed-off-by: Aniruddha Paul <aniruddha.paul@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jan Glaza <jan.glaza@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-30ice: introduce PTP state machineJacob Keller1-1/+0
Add PTP state machine so that the driver can correctly identify PTP state around resets. When the driver got information about ungraceful reset, PTP was not prepared for reset and it returned error. When this situation occurs, prepare PTP before rebuilding its structures. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-02ice: Enable SW interrupt from FW for LL TSKarol Kolacinski1-0/+2
Introduce new capability - Low Latency Timestamping with Interrupt. On supported devices, driver can request a single timestamp from FW without polling the register afterwards. Instead, FW can issue a dedicated interrupt when the timestamp was read from the PHY register and its value is available to read from the register. This eliminates the need of bottom half scheduling, which results in minimal delay for timestamping. For this mode, allocate TS indices sequentially, so that timestamps are always completed in FIFO manner. Co-developed-by: Yochai Hagvi <yochai.hagvi@intel.com> Signed-off-by: Yochai Hagvi <yochai.hagvi@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02ice: Schedule service task in IRQ top halfKarol Kolacinski1-1/+0
Schedule service task and EXTTS in the top half to avoid bottom half scheduling if possible, which significantly reduces timestamping delay. Co-developed-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Michal Michalik <michal.michalik@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-19Merge tag 'for-netdev' of ↵Jakub Kicinski1-0/+2
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Alexei Starovoitov says: ==================== pull-request: bpf-next 2023-12-18 This PR is larger than usual and contains changes in various parts of the kernel. The main changes are: 1) Fix kCFI bugs in BPF, from Peter Zijlstra. End result: all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y. 2) Introduce BPF token object, from Andrii Nakryiko. It adds an ability to delegate a subset of BPF features from privileged daemon (e.g., systemd) through special mount options for userns-bound BPF FS to a trusted unprivileged application. The design accommodates suggestions from Christian Brauner and Paul Moore. Example: $ sudo mkdir -p /sys/fs/bpf/token $ sudo mount -t bpf bpffs /sys/fs/bpf/token \ -o delegate_cmds=prog_load:MAP_CREATE \ -o delegate_progs=kprobe \ -o delegate_attachs=xdp 3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei. - Complete precision tracking support for register spills - Fix verification of possibly-zero-sized stack accesses - Fix access to uninit stack slots - Track aligned STACK_ZERO cases as imprecise spilled registers. It improves the verifier "instructions processed" metric from single digit to 50-60% for some programs. - Fix verifier retval logic 4) Support for VLAN tag in XDP hints, from Larysa Zaremba. 5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu. End result: better memory utilization and lower I$ miss for calls to BPF via BPF trampoline. 6) Fix race between BPF prog accessing inner map and parallel delete, from Hou Tao. 7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu. It allows BPF interact with IPSEC infra. The intent is to support software RSS (via XDP) for the upcoming ipsec pcpu work. Experiments on AWS demonstrate single tunnel pcpu ipsec reaching line rate on 100G ENA nics. 8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao. 9) BPF file verification via fsverity, from Song Liu. It allows BPF progs get fsverity digest. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits) bpf: Ensure precise is reset to false in __mark_reg_const_zero() selftests/bpf: Add more uprobe multi fail tests bpf: Fail uprobe multi link with negative offset selftests/bpf: Test the release of map btf s390/bpf: Fix indirect trampoline generation selftests/bpf: Temporarily disable dummy_struct_ops test on s390 x86/cfi,bpf: Fix bpf_exception_cb() signature bpf: Fix dtor CFI cfi: Add CFI_NOSEAL() x86/cfi,bpf: Fix bpf_struct_ops CFI x86/cfi,bpf: Fix bpf_callback_t CFI x86/cfi,bpf: Fix BPF JIT call cfi: Flip headers selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment bpf: Limit the number of kprobes when attaching program to multiple kprobes bpf: Limit the number of uprobes when attaching program to multiple uprobes bpf: xdp: Register generic_kfunc_set with XDP programs selftests/bpf: utilize string values for delegate_xxx mount options ... ==================== Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14ice: configure FW loggingPaul M Stillwell Jr1-0/+9
Users want the ability to debug FW issues by retrieving the FW logs from the E8xx devices. Use debugfs to allow the user to configure the log level and number of messages for FW logging. If FW logging is supported on the E8xx then the file 'fwlog' will be created under the PCI device ID for the ice driver. If the file does not exist then either the E8xx doesn't support FW logging or debugfs is not enabled on the system. One thing users want to do is control which events are reported. The user can read and write the 'fwlog/modules/<module name>' to get/set the log levels. Each module in the FW that supports logging ht as a file under 'fwlog/modules' that supports reading (to see what the current log level is) and writing (to change the log level). The format to set the log levels for a module are: # echo <log level> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/<module> The supported log levels are: * none * error * warning * normal * verbose Each level includes the messages from the previous/lower level The modules that are supported are: * general * ctrl * link * link_topo * dnl * i2c * sdp * mdio * adminq * hdma * lldp * dcbx * dcb * xlr * nvm * auth * vpd * iosf * parser * sw * scheduler * txq * rsvd * post * watchdog * task_dispatch * mng * synce * health * tsdrv * pfreg * mdlver * all The module 'all' is a special module which allows the user to read or write to all of the modules. The following example command would set the DCB module to the 'normal' log level: # echo normal > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb If the user wants to set the DCB, Link, and the AdminQ modules to 'verbose' then the commands are: # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/link # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/adminq If the user wants to set all modules to the 'warning' level then the command is: # echo warning > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all If the user wants to disable logging for a module then they can set the level to 'none'. An example setting the 'watchdog' module is: # echo none > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/watchdog If the user wants to see what the log level is for a specific module then the command is: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb This will return the log level for the DCB module. If the user wants to see the log level for all the modules then the command is: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all Writing to the module file will update the configuration, but NOT enable the configuration (that is a separate command). In addition to configuring the modules, the user can also configure the number of log messages (nr_messages) to include in a single Admin Receive Queue (ARQ) event.The range is 1-128 (1 means push every log message, 128 means push only when the max AQ command buffer is full). The suggested value is 10. To see/change the resolution the user can read/write the 'fwlog/nr_messages' file. An example changing the value to 50 is # echo 50 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages To see the current value of 'nr_messages' then the command is: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-14ice: enable symmetric-xor RSS for Toeplitz hash functionJeff Guo1-0/+2
Allow the user to set the symmetric Toeplitz hash function via: # ethtool -X eth0 hfunc toeplitz symmetric-xor All existing RSS configurations will be converted to symmetric unless they have a non-symmetric field (other than IP src/dst and L4 src/dst ports) used for hashing. The driver will reject a new RSS configuration if such a field is requested. The hash function in the E800 NICs is set per-VSI and a specific AQ command is needed to modify the hash function. Use the AQ command to enable setting the symmetric Toeplitz RSS hash function for any VSI in the new ice_set_rss_hfunc(). When the Symmetric Toeplitz hash function is used, the hardware sets the input set of the RSS (Toeplitz) algorithm to be the XOR of the fields index by HSYMM and the fields index by the INSET registers. We use this to create a symmetric hash by setting the HSYMM registers to point to their counterparts in the INSET registers: HSYMM [src_fv] = dst_fv; HSYMM [dst_fv] = src_fv; where src_fv and dst_fv are the indexes of the protocol's src and dst fields. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Jeff Guo <jia.guo@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-8-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14ice: Support HW timestamp hintLarysa Zaremba1-0/+2
Use previously refactored code and create a function that allows XDP code to read HW timestamp. Also, introduce packet context, where hints-related data will be stored. ice_xdp_buff contains only a pointer to this structure, to avoid copying it in ZC mode later in the series. HW timestamp is the first supported hint in the driver, so also add xdp_metadata_ops. Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/20231205210847.28460-6-larysa.zaremba@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-05ice: read internal temperature sensorKonrad Knitter1-0/+1
Since 4.30 firmware exposes internal thermal sensor reading via admin queue commands. Expose those readouts via hwmon API when supported. Datasheet: Get Sensor Reading Command (Opcode: 0x0632) +--------------------+--------+--------------------+-------------------------+ | Name | Bytes | Value | Remarks | +--------------------+--------+--------------------+-------------------------+ | Flags | 1-0 | | | | Opcode | 2-3 | 0x0632 | Command opcode | | Datalen | 4-5 | 0 | No external buffer. | | Return value | 6-7 | | Return value. | | Cookie High | 8-11 | Cookie | | | Cookie Low | 12-15 | Cookie | | | Sensor | 16 | | 0x00: Internal temp | | | | | 0x01-0xFF: Reserved. | | Format | 17 | Requested response | Only 0x00 is supported. | | | | format | 0x01-0xFF: Reserved. | | Reserved | 18-23 | | | | Data Address high | 24-27 | Response buffer | | | | | address | | | Data Address low | 28-31 | Response buffer | | | | | address | | +--------------------+--------+--------------------+-------------------------+ Get Sensor Reading Response (Opcode: 0x0632) +--------------------+--------+--------------------+-------------------------+ | Name | Bytes | Value | Remarks | +--------------------+--------+--------------------+-------------------------+ | Flags | 1-0 | | | | Opcode | 2-3 | 0x0632 | Command opcode | | Datalen | 4-5 | 0 | No external buffer | | Return value | 6-7 | | Return value. | | | | | EINVAL: Invalid | | | | | parameters | | | | | ENOENT: Unsupported | | | | | sensor | | | | | EIO: Sensor access | | | | | error | | Cookie High | 8-11 | Cookie | | | Cookie Low | 12-15 | Cookie | | | Sensor Reading | 16-23 | | Format of the reading | | | | | is dependent on request | | Data Address high | 24-27 | Response buffer | | | | | address | | | Data Address low | 28-31 | Response buffer | | | | | address | | +--------------------+--------+--------------------+-------------------------+ Sensor Reading for Sensor 0x00 (Internal Chip Temperature): +--------------------+--------+--------------------+-------------------------+ | Name | Bytes | Value | Remarks | +--------------------+--------+--------------------+-------------------------+ | Thermal Sensor | 0 | | Reading in degrees | | reading | | | Celsius. Signed int8 | | Warning High | 1 | | Warning High threshold | | threshold | | | in degrees Celsius. | | | | | Unsigned int8. | | | | | 0xFF when unsupported | | Critical High | 2 | | Critical High threshold | | threshold | | | in degrees Celsius. | | | | | Unsigned int8. | | | | | 0xFF when unsupported | | Fatal High | 3 | | Fatal High threshold | | threshold | | | in degrees Celsius. | | | | | Unsigned int8. | | | | | 0xFF when unsupported | | Reserved | 4-7 | | | +--------------------+--------+--------------------+-------------------------+ Driver provides current reading from HW as well as device specific thresholds for thermal alarm (Warning, Critical, Fatal) events. $ sensors Output ========================================================= ice-pci-b100 Adapter: PCI adapter temp1: +62.0°C (high = +95.0°C, crit = +105.0°C) (emerg = +115.0°C) Tested on Intel Corporation Ethernet Controller E810-C for SFP Co-developed-by: Marcin Domagala <marcinx.domagala@intel.com> Signed-off-by: Marcin Domagala <marcinx.domagala@intel.com> Co-developed-by: Eric Joyner <eric.joyner@intel.com> Signed-off-by: Eric Joyner <eric.joyner@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Konrad Knitter <konrad.knitter@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-13ice: reserve number of CP queuesMichal Swiatkowski1-0/+6
Rebuilding CP VSI each time the PR is created drastically increase the time of maximum VFs creation. Add function to reserve number of CP queues to deal with this problem. Use the same function to decrease number of queues in case of removing VFs. Assume that caller of ice_eswitch_reserve_cp_queues() will also call ice_eswitch_attach/detach() correct number of times. Still one by one PR adding is handy for VF resetting routine. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: track port representors in xarrayMichal Swiatkowski1-0/+1
Instead of assuming that each VF has pointer to port representor save it in xarray. It will allow adding port representor for other device types. Drop reference to VF where it is use only to get port representor. Get it from xarray instead. The functions will no longer by specific for VF, rename them. Track id assigned by xarray in port representor structure. The id can't be used as ::q_id, because it is fixed during port representor lifetime. ::q_id can change after adding / removing other port representors. Side effect of removing VF pointer is that we are losing VF MAC information used in unrolling. Store it in port representor as parent MAC. Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: rename switchdev to eswitchMichal Swiatkowski1-3/+3
Eswitch is used as a prefix for related functions. Main structure storing all data related to eswitch should also be named as eswitch instead of ice_switchdev_info. Rename it. Also rename switchdev to eswitch where the context is not about eswitch mode. ::uplink_netdev was changed to netdev for simplicity. There is no other netdev in function scope so it is obvious. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-10-20ice: add bitmap to track VF MSI-X usageMichal Swiatkowski1-0/+2
Create a bitamp to track MSI-X usage for VFs. The bitmap has the size of total MSI-X amount on device, because at init time the amount of MSI-X used by VFs isn't known. The bitmap is used in follow up patchset to provide a block of continuous block of MSI-X indexes for each created VF. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-18ice: Refactor finding advertised link speedPawel Chmielewski1-0/+1
Refactor ice_get_link_ksettings to using forced speed to link modes mapping. Suggested-by : Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-20ice: Auxbus devices & driver for E822 TSMichal Michalik1-0/+12
There is a problem in HW in E822-based devices leading to race condition. It might happen that, in order: - PF0 (which owns the PHC) requests few timestamps, - PF1 requests a timestamp, - interrupt is being triggered and both PF0 and PF1 threads are woken up, - PF0 got one timestamp, still waiting for others so not going to sleep, - PF1 gets it's timestamp, process it and go to sleep, - PF1 requests a timestamp again, - just before PF0 goes to sleep timestamp of PF1 appear, - PF0 finishes all it's timestamps and go to sleep (PF1 also sleeping). That leaves PF1 timestamp memory not read, which lead to blocking the next interrupt from arriving. Fix it by adding auxiliary devices and only one driver to handle all the timestamps for all PF's by PHC owner. In the past each PF requested it's own timestamps and process it from the start till the end which causes problem described above. Currently each PF requests the timestamps as before, but the actual reading of the completed timestamps is being done by the PTP auxiliary driver, which is registered by the PF which owns PHC. Additionally, the newly introduced auxiliary driver/devices for PTP clock owner will be used for other features in all products (including E810). Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Michal Michalik <michal.michalik@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-18ice: introduce ice_pf_src_tmr_ownedJacob Keller1-0/+2
Add ice_pf_src_tmr_owned() macro to check the function capability bit indicating if the current function owns the PTP hardware clock. This is slightly shorter than the more verbose access via hw.func_caps.ts_func_info.src_tmr_owned. Use this where possible rather than open coding its equivalent. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-18ice: remove ICE_F_PTP_EXTTS feature flagJacob Keller1-1/+0
The ICE_F_PTP_EXTTS feature flag is ostensibly intended to support checking whether the device supports external timestamp pins. It is only checked in E810-specific code flows, and is enabled for all E810-based devices. E822 and E823 flows unconditionally enable external timestamp support. This makes the feature flag meaningless, as it is always enabled. Just unconditionally enable support for external timestamp pins and remove this unnecessary flag. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-17ice: implement dpll interface to control cguArkadiusz Kubalewski1-0/+3
Control over clock generation unit is required for further development of Synchronous Ethernet feature. Interface provides ability to obtain current state of a dpll, its sources and outputs which are pins, and allows their configuration. Co-developed-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Milena Olech <milena.olech@intel.com> Co-developed-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17ice: add admin commands to access cgu configurationArkadiusz Kubalewski1-0/+2
Add firmware admin command to access clock generation unit configuration, it is required to enable Extended PTP and SyncE features in the driver. Add definitions of possible hardware variations of input and output pins related to clock generation unit and functions to access the data. Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-17ice: split ice_aq_wait_for_event() func into twoPrzemek Kitszel1-1/+4
Mitigate race between registering on wait list and receiving AQ Response from FW. ice_aq_prep_for_event() should be called before sending AQ command, ice_aq_wait_for_event() should be called after sending AQ command, to wait for AQ Response. Please note, that this was found by reading the code, an actual race has not yet materialized. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-17ice: embed &ice_rq_event_info event into struct ice_aq_taskPrzemek Kitszel1-2/+16
Expose struct ice_aq_task to callers, what takes burden of memory ownership out from AQ-wait family of functions, and reduces need for heap-based allocations. Embed struct ice_rq_event_info event into struct ice_aq_task (instead of it being a ptr) to remove some more code from the callers. Subsequent commit will improve more based on this one. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-27ice: Add driver support for firmware changes for LAGDave Ertman1-0/+5
Add the defines, fields, and detection code for FW support of LAG for SRIOV. Also exposes some previously static functions to allow access in the lag code. Clean up code that is unused or not needed for LAG support. Also add an ordered workqueue for processing LAG events. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-24ice: implement bridge port vlanMichal Swiatkowski1-0/+1
Port VLAN in this case means push and pop VLAN action on specific vid. There are a few limitation in hardware: - push and pop can't be used separately - if port VLAN is used there can't be any trunk VLANs, because pop action is done on all traffic received by VSI in port VLAN mode - port VLAN mode on uplink port isn't supported Reflect these limitations in code using dev_info to inform the user about unsupported configuration. In bridge mode there is a need to configure port vlan without resetting VFs. To do that implement ice_port_vlan_on/off() functions. They are only configuring correct vlan_ops to allow setting port vlan. We also need to clear port vlan without resetting the VF which is not supported right now. Change it by implementing clear_port_vlan ops. As previous VLAN configuration isn't always the same, store current config while creating port vlan and restore it in clear function. Configuration steps: - configure switchdev with bridge - #bridge vlan add dev eth0 vid 120 pvid untagged - #bridge vlan add dev eth1 vid 120 pvid untagged - ping from VF0 to VF1 Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-24ice: Implement basic eswitch bridge setupWojciech Drewek1-1/+3
With this patch, ice driver is able to track if the port representors or uplink port were added to the linux bridge in switchdev mode. Listen for NETDEV_CHANGEUPPER events in order to detect this. ice_esw_br data structure reflects the linux bridge and stores all the ports of the bridge (ice_esw_br_port) in xarray, it's created when the first port is added to the bridge and freed once the last port is removed. Note that only one bridge is supported per eswitch. Bridge port (ice_esw_br_port) can be either a VF port representor port or uplink port (ice_esw_br_port_type). In both cases bridge port holds a reference to the VSI, VF's VSI in case of the PR and uplink VSI in case of the uplink. VSI's index is used as an index to the xarray in which ports are stored. Add a check which prevents configuring switchdev mode if uplink is already added to any bridge. This is needed because we need to listen for NETDEV_CHANGEUPPER events to record if the uplink was added to the bridge. Netdevice notifier is registered after eswitch mode is changed to switchdev. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-08ice: handle extts in the miscellaneous interrupt threadKarol Kolacinski1-0/+7
The ice_ptp_extts_work() and ice_ptp_periodic_work() functions are both scheduled on the same kthread worker, pf.ptp.kworker. The ice_ptp_periodic_work() function sends to the firmware to interact with the PHY, and must block to wait for responses. This can cause delay in responding to the PFINT_OICR_TSYN_EVNT interrupt cause, ultimately resulting in disruption to processing an input signal of the frequency is high enough. In our testing, even 100 Hz signals get disrupted. Fix this by instead processing the signal inside the miscellaneous interrupt thread prior to handling Tx timestamps. Use atomic bits in a new pf->misc_thread bitmap in order to safely communicate which tasks require processing within the ice_misc_intr_thread_fn(). This ensures the communication of desired tasks from the ice_misc_intr() are correctly processed without racing even in the event that the interrupt triggers again before the thread function exits. Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins") Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-17ice: Remove LAG+SRIOV mutual exclusionDave Ertman1-19/+0
There was a change previously to stop SR-IOV and LAG from existing on the same interface. This was to prevent the violation of LACP (Link Aggregation Control Protocol). The method to achieve this was to add a no-op Rx handler onto the netdev when SR-IOV VFs were present, thus blocking bonding, bridging, etc from claiming the interface by adding its own Rx handler. Also, when an interface was added into a aggregate, then the SR-IOV capability was set to false. There are some users that have in house solutions using both SR-IOV and bridging/bonding that this method interferes with (e.g. creating duplicate VFs on the bonded interfaces and failing between them when the interface fails over). It makes more sense to provide the most functionality possible, the restriction on co-existence of these features will be removed. No additional functionality is currently being provided beyond what existed before the co-existence restriction was put into place. It is up to the end user to not implement a solution that would interfere with existing network protocols. Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-17ice: refactor PHY type to ethtool link modePaul Greenwalt1-0/+1
Refactor ice_phy_type_to_ethtool to use phy_type_[low|high]_lkup table to map PHY type to AQ link speed and ethtool link mode. This removes complexity and simplifies future changes. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16ice: add dynamic interrupt allocationPiotr Raczynski1-0/+3
Currently driver can only allocate interrupt vectors during init phase by calling pci_alloc_irq_vectors. Change that and make use of new pci_msix_alloc_irq_at/pci_msix_free_irq API and enable to allocate and free more interrupts after MSIX has been enabled. Since not all platforms supports dynamic allocation, check it with pci_msix_can_alloc_dyn. Extend the tracker to keep track how many interrupts are allocated initially so when all such vectors are already used, additional interrupts are automatically allocated dynamically. Remember each interrupt allocation method to then free appropriately. Since some features may require interrupts allocated dynamically add appropriate VSI flag and take it into account when allocating new interrupt. Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16ice: track interrupt vectors with xarrayPiotr Raczynski1-8/+1
Replace custom interrupt tracker with generic xarray data structure. Remove all code responsible for searching for a new entry with xa_alloc, which always tries to allocate at the lowes possible index. As a result driver is always using a contiguous region of the MSIX vector table. New tracker keeps ice_irq_entry entries in xarray as opaque for the rest of the driver hiding the entry details from the caller. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16ice: add individual interrupt allocationPiotr Raczynski1-8/+3
Currently interrupt allocations, depending on a feature are distributed in batches. Also, after allocation there is a series of operations that distributes per irq settings through that batch of interrupts. Although driver does not yet support dynamic interrupt allocation, keep allocated interrupts in a pool and add allocation abstraction logic to make code more flexible. Keep per interrupt information in the ice_q_vector structure, which yields ice_vsi::base_vector redundant. Also, as a result there are a few functions that can be removed. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16ice: move interrupt related code to separate filePiotr Raczynski1-0/+1
Keep interrupt handling code in a dedicated file. This helps keep driver structured better and prepares for more functionality added to this file. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-9/+5
net/wireless/nl80211.c b27f07c50a73 ("wifi: nl80211: fix puncturing bitmap policy") cbbaf2bb829b ("wifi: nl80211: add a command to enable/disable HW timestamping") https://lore.kernel.org/all/20230314105421.3608efae@canb.auug.org.au tools/testing/selftests/net/Makefile 62199e3f1658 ("selftests: net: Add VXLAN MDB test") 13715acf8ab5 ("selftest: Add test for bind() conflicts.") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15ice: avoid bonding causing auxiliary plug/unplug under RTNL lockDave Ertman1-9/+5
RDMA is not supported in ice on a PF that has been added to a bonded interface. To enforce this, when an interface enters a bond, we unplug the auxiliary device that supports RDMA functionality. This unplug currently happens in the context of handling the netdev bonding event. This event is sent to the ice driver under RTNL context. This is causing a deadlock where the RDMA driver is waiting for the RTNL lock to complete the removal. Defer the unplugging/re-plugging of the auxiliary device to the service task so that it is not performed under the RTNL lock context. Cc: stable@vger.kernel.org # 6.1.x Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Link: https://lore.kernel.org/netdev/CAK8fFZ6A_Gphw_3-QMGKEFQk=sfCw1Qmq0TVZK3rtAi7vb621A@mail.gmail.com/ Fixes: 5cb1ebdbc434 ("ice: Fix race condition during interface enslave") Fixes: 4eace75e0853 ("RDMA/irdma: Report the correct link speed") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230310194833.3074601-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-09ice: Remove unnecessary aer.h includeBjorn Helgaas1-1/+0
<linux/aer.h> is unused, so remove it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15ice: add support BIG TCP on IPv6Pawel Chmielewski1-0/+2
Enable sending BIG TCP packets on IPv6 in the ice driver using generic ipv6_hopopt_jumbo_remove helper for stripping HBH header. Tested: netperf -t TCP_RR -H 2001:db8:0:f101::1 -- -r80000,80000 -O MIN_LATENCY,P90_LATENCY,P99_LATENCY,TRANSACTION_RATE Tested on two different setups. In both cases, the following settings were applied after loading the changed driver: ip link set dev enp175s0f1np1 gso_max_size 130000 ip link set dev enp175s0f1np1 gro_max_size 130000 ip link set dev enp175s0f1np1 mtu 9000 First setup: Before: Minimum 90th 99th Transaction Latency Percentile Percentile Rate Microseconds Latency Latency Tran/s Microseconds Microseconds 134 279 410 3961.584 After: Minimum 90th 99th Transaction Latency Percentile Percentile Rate Microseconds Latency Latency Tran/s Microseconds Microseconds 135 178 216 6093.404 The other setup: Before: Minimum 90th 99th Transaction Latency Percentile Percentile Rate Microseconds Latency Latency Tran/s Microseconds Microseconds 218 414 478 2944.765 After: Minimum 90th 99th Transaction Latency Percentile Percentile Rate Microseconds Latency Latency Tran/s Microseconds Microseconds 146 238 266 4700.596 Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-06net/sched: move struct tc_mqprio_qopt_offload from pkt_cls.h to pkt_sched.hVladimir Oltean1-0/+1
Since mqprio is a scheduler and not a classifier, move its offload structure to pkt_sched.h, where struct tc_taprio_qopt_offload also lies. Also update some header inclusions in drivers that access this structure, to the best of my abilities. Cc: Igor Russkikh <irusskikh@marvell.com> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Saeed Mahameed <saeedm@nvidia.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: Daniel Machon <daniel.machon@microchip.com> Cc: UNGLinuxDriver@microchip.com Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-03ice: split probe into smaller functionsMichal Swiatkowski1-0/+2
Part of code from probe can be reused in reload flow. Move this code to separate function. Create unroll functions for each part of initialization, like: ice_init_dev() and ice_deinit_dev(). It simplifies unrolling and can be used in remove flow. Avoid freeing port info as it could be reused in reload path. Will be freed in remove path since is allocated via devm_kzalloc(). Also clean the remove path to reflect the init steps. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03ice: cleanup in VSI config/deconfig codeMichal Swiatkowski1-2/+1
Do few small cleanups: 1) Rename the function to reflect that it doesn't configure all things related to VSI. ice_vsi_cfg_lan() better fits to what function is doing. ice_vsi_cfg() can be use to name function that will configure whole VSI. 2) Remove unused ethtype field from VSI. There is no need to set ethtype here, because it is never used. 3) Remove unnecessary check for ICE_VSI_CHNL. There is check for ICE_VSI_CHNL in ice_vsi_get_qs, so there is no need to check it before calling the function. 4) Simplify ice_vsi_alloc() call. There is no need to check the type of VSI before calling ice_vsi_alloc(). For ICE_VSI_CHNL vf is always NULL (ice_vsi_setup() is called with vf=NULL). For ICE_VSI_VF or ICE_VSI_CTRL ch is always NULL and for other VSI types ch and vf are always NULL. 5) Remove unnecessary call to ice_vsi_dis_irq(). ice_vsi_dis_irq() will be called in ice_vsi_close() flow (ice_vsi_close() -> ice_vsi_down() -> ice_vsi_dis_irq()). Remove unnecessary call. 6) Don't remove specific filters in release. All hw filters are removed in ice_fltr_remove_alli(), which is always called in VSI release flow. There is no need to remove only ethertype filters before calling ice_fltr_remove_all(). 7) Rename ice_vsi_clear() to ice_vsi_free(). As ice_vsi_clear() only free memory allocated in ice_vsi_alloc() rename it to ice_vsi_free() which better shows what function is doing. 8) Free coalesce param in rebuild. There is potential memory leak if configuration of VSI lan fails. Free coalesce to avoid it. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03ice: move RDMA init to ice_idc.cMichal Swiatkowski1-0/+1
Simplify probe flow by moving all RDMA related code to ice_init_rdma(). Unroll irq allocation if RDMA initialization fails. Implement ice_deinit_rdma() and use it in remove flow. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Acked-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
net/core/gro.c 7d2c89b32587 ("skb: Do mix page pool and page referenced frags in GRO") b1a78b9b9886 ("net: add support for ipv4 big tcp") https://lore.kernel.org/all/20230203094454.5766f160@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-04 04:31:27 +0300