| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge in late fixes to prepare for the 6.9 net-next PR.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix "double" clearing of interrupts, which can cause external events
or timestamps to be missed.
The IGC_TSIRC Time Sync Interrupt Cause register can be cleared in two
ways, by either reading it or by writing '1' into the specific cause
bit. This is documented in section 8.16.1.
The following flow was used:
1. read IGC_TSIRC into 'tsicr';
2. handle the interrupts present in 'tsirc' and mark them in 'ack';
3. write 'ack' into IGC_TSICR;
As both (1) and (3) will clear the interrupt cause, if the same
interrupt happens again between (1) and (3) it will be ignored,
causing events to be missed.
Remove the extra clear in (3).
Fixes: 2c344ae24501 ("igc: Add support for TX timestamping")
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de> # Intel i225
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When a frame can not be transmitted in XDP_REDIRECT
(e.g. due to a full queue), it is necessary to free
it by calling xdp_return_frame_rx_napi.
However, this is the responsibility of the caller of
the ndo_xdp_xmit (see for example bq_xmit_all in
kernel/bpf/devmap.c) and thus calling it inside
igc_xdp_xmit (which is the ndo_xdp_xmit of the igc
driver) as well will lead to memory corruption.
In fact, bq_xmit_all expects that it can return all
frames after the last successfully transmitted one.
Therefore, break for the first not transmitted frame,
but do not call xdp_return_frame_rx_napi in igc_xdp_xmit.
This is equally implemented in other Intel drivers
such as the igb.
There are two alternatives to this that were rejected:
1. Return num_frames as all the frames would have been
transmitted and release them inside igc_xdp_xmit.
While it might work technically, it is not what
the return value is meant to represent (i.e. the
number of SUCCESSFULLY transmitted packets).
2. Rework kernel/bpf/devmap.c and all drivers to
support non-consecutively dropped packets.
Besides being complex, it likely has a negative
performance impact without a significant gain
since it is anyway unlikely that the next frame
can be transmitted if the previous one was dropped.
The memory corruption can be reproduced with
the following script which leads to a kernel panic
after a few seconds. It basically generates more
traffic than a i225 NIC can transmit and pushes it
via XDP_REDIRECT from a virtual interface to the
physical interface where frames get dropped.
#!/bin/bash
INTERFACE=enp4s0
INTERFACE_IDX=`cat /sys/class/net/$INTERFACE/ifindex`
sudo ip link add dev veth1 type veth peer name veth2
sudo ip link set up $INTERFACE
sudo ip link set up veth1
sudo ip link set up veth2
cat << EOF > redirect.bpf.c
SEC("prog")
int redirect(struct xdp_md *ctx)
{
return bpf_redirect($INTERFACE_IDX, 0);
}
char _license[] SEC("license") = "GPL";
EOF
clang -O2 -g -Wall -target bpf -c redirect.bpf.c -o redirect.bpf.o
sudo ip link set veth2 xdp obj redirect.bpf.o
cat << EOF > pass.bpf.c
SEC("prog")
int pass(struct xdp_md *ctx)
{
return XDP_PASS;
}
char _license[] SEC("license") = "GPL";
EOF
clang -O2 -g -Wall -target bpf -c pass.bpf.c -o pass.bpf.o
sudo ip link set $INTERFACE xdp obj pass.bpf.o
cat << EOF > trafgen.cfg
{
/* Ethernet Header */
0xe8, 0x6a, 0x64, 0x41, 0xbf, 0x46,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
const16(ETH_P_IP),
/* IPv4 Header */
0b01000101, 0, # IPv4 version, IHL, TOS
const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header))
const16(2), # IPv4 ident
0b01000000, 0, # IPv4 flags, fragmentation off
64, # IPv4 TTL
17, # Protocol UDP
csumip(14, 33), # IPv4 checksum
/* UDP Header */
10, 0, 1, 1, # IP Src - adapt as needed
10, 0, 1, 2, # IP Dest - adapt as needed
const16(6666), # UDP Src Port
const16(6666), # UDP Dest Port
const16(1008), # UDP length (UDP header 8 bytes + payload length)
csumudp(14, 34), # UDP checksum
/* Payload */
fill('W', 1000),
}
EOF
sudo trafgen -i trafgen.cfg -b3000MB -o veth1 --cpp
Fixes: 4ff320361092 ("igc: Add support for XDP_REDIRECT action")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
struct net_device poll_dev in struct igc_q_vector was added
in one of the initial commits, but never used.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a cleanup patch, making code a bit more concise.
1) Use skb_network_offset(skb) in place of
(skb_network_header(skb) - skb->data)
2) Use -skb_network_offset(skb) in place of
(skb->data - skb_network_header(skb))
3) Use skb_transport_offset(skb) in place of
(skb_transport_header(skb) - skb->data)
4) Use skb_inner_transport_offset(skb) in place of
(skb_inner_transport_header(skb) - skb->data)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Energy Efficient Ethernet should always be negotiated with the link
peer. Don't include SUPPORTED_Autoneg in the results of get_eee() for
supported, advertised or lp_advertised, since it is
assumed. Additionally, ethtool(1) ignores the set bit, and no other
driver sets this.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/dev.c
9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()")
723de3ebef03 ("net: free altname using an RCU callback")
net/unix/garbage.c
11498715f266 ("af_unix: Remove io_uring code for GC.")
25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.")
drivers/net/ethernet/renesas/ravb_main.c
ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path"
)
c2da9408579d ("ravb: Add Rx checksum offload support for GbEth")
net/mptcp/protocol.c
bdd70eb68913 ("mptcp: drop the push_pending field")
28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for LEDs on i225/i226. The LEDs can be controlled via sysfs
from user space using the netdev trigger. The LEDs are named as
igc-<bus><device>-<led> to be easily identified.
Offloading link speed and activity are supported. Other modes are simulated
in software by using on/off. Tested on Intel i225.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240213184138.1483968-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
PHY_CONTROL register works as defined in the IEEE 802.3 specification
(IEEE 802.3-2008 22.2.4.1). Tidy up the temporary workaround.
User impact: PHY can now be powered down when the ethernet link is down.
Testing hints: ip link set down <device> (or just disconnect the
ethernet cable).
Oldest tested NVM version is: 1045:740.
Fixes: 5586838fe9ce ("igc: Add code for PHY support")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
All filtering parameters such as EtherType and VLAN TCI are stored in host
byte order except for the VLAN EtherType. Unify it.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
All igc filter implementations use netdev_*() printing functions except for
the flex filters. Unify it.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use reverse xmas tree coding style convention in igc_add_flex_filter().
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This is in preparation of using the existing names for linkmode
bitmaps.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
side
In order to pass EEE link modes beyond bit 32 to userspace we have to
complement the 32 bit bitmaps in struct ethtool_eee with linkmode
bitmaps. Therefore, similar to ethtool_link_settings and
ethtool_link_ksettings, add a struct ethtool_keee. In a first step
it's an identical copy of ethtool_eee. This patch simply does a
s/ethtool_eee/ethtool_keee/g for all users.
No functional change intended.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()")
0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL")
https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-01-03 (i40e, ice, igc)
This series contains updates to i40e, ice, and igc drivers.
Ke Xiao fixes use after free for unicast filters on i40e.
Andrii restores VF MSI-X flag after PCI reset on i40e.
Paul corrects admin queue link status structure to fulfill firmware
expectations for ice.
Rodrigo Cataldo corrects value used for hicredit calculations on igc.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Fix hicredit calculation
ice: fix Get link status data length
i40e: Restore VF MSI-X state during PCI reset
i40e: fix use-after-free in i40e_aqc_add_filters()
====================
Link: https://lore.kernel.org/r/20240103193254.822968-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the Intel Software Manual for I225, Section 7.5.2.7,
hicredit should be multiplied by the constant link-rate value, 0x7736.
Currently, the old constant link-rate value, 0x7735, from the boards
supported on igb are being used, most likely due to a copy'n'paste, as
the rest of the logic is the same for both drivers.
Update hicredit accordingly.
Fixes: 1ab011b0bf07 ("igc: Add support for CBS offloading")
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Rodrigo Cataldo <rodrigo.cadore@l-acoustics.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently the driver accepts VLAN EtherType steering rules regardless of
the configured mask. And things might fail silently or with confusing error
messages to the user. The VLAN EtherType can only be matched by full
mask. Therefore, add a check for that.
For instance the following rule is invalid, but the driver accepts it and
ignores the user specified mask:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
| m 0x00ff action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x8100 mask: 0x0
| VLAN: 0x0 mask: 0xffff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 0
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
| m 0x00ff action 0
|rmgr: Cannot insert RX class rule: Operation not supported
Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops")
Suggested-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently the driver accepts VLAN TCI steering rules regardless of the
configured mask. And things might fail silently or with confusing error
messages to the user.
There are two ways to handle the VLAN TCI mask:
1. Match on the PCP field using a VLAN prio filter
2. Match on complete TCI field using a flex filter
Therefore, add checks and code for that.
For instance the following rule is invalid and will be converted into a
VLAN prio rule which is not correct:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
| action 1
|Added rule with ID 61
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 61
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x0 mask: 0xffff
| VLAN: 0x1 mask: 0x1fff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 1
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
| action 1
|rmgr: Cannot insert RX class rule: Operation not supported
Fixes: 7991487ecb2d ("igc: Allow for Flex Filters to be installed")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently the driver allows to configure matching by VLAN EtherType.
However, the retrieval function does not report it back to the user. Add
it.
Before:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| Action: Direct to queue 0
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x8100 mask: 0x0
| VLAN: 0x0 mask: 0xffff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 0
Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Refactor the igc driver to use FIELD_GET() for mask and shift reads,
which reduces lines of code and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired in a later patch.
@get@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) & mask) >> shift)
+FIELD_GET(mask, a)
and applied via:
spatch --sp-file field_prep.cocci --in-place --dir \
drivers/net/ethernet/intel/
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Refactor igc driver to use FIELD_PREP(), which reduces lines of code
and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired in a later patch.
@prep2@
constant shift,mask;
type T;
expression a;
@@
-(((T)(a) << shift) & mask)
+FIELD_PREP(mask, a)
@prep@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) << shift) & mask)
+FIELD_PREP(mask, a)
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This series is introducing the use of FIELD_GET and FIELD_PREP which
requires bitfield.h to be included. Fix all the includes in this one
change, and rearrange includes into alphabetical order to ease
readability and future maintenance.
virtchnl.h and it's usage was modified to have it's own includes as it
should. This required including bits.h for virtchnl.h.
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters
as direct function arguments. This will force us to change the API (and
all drivers' functions) every time some new parameters are added.
This is part 1/2 of the fix, as suggested in [1]:
- First simplify the code by always providing a pointer to all params
(indir, key and func); the fact that some of them may be NULL seems
like a weird historic thing or a premature optimization.
It will simplify the drivers if all pointers are always present.
- Then make the functions take a dev pointer, and a pointer to a
single struct wrapping all arguments. The set_* should also take
an extack.
Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1]
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch converts some basic cases of ethtool_sprintf() to
ethtool_puts().
The conversions are used in cases where ethtool_sprintf() was being used
with just two arguments:
| ethtool_sprintf(&data, buffer[i].name);
or when it's used with format string: "%s"
| ethtool_sprintf(&data, "%s", buffer[i].name);
which both now become:
| ethtool_puts(&data, buffer[i].name);
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for using Timer 1 (i225/i226 have 4 timer registers) as a
free-running clock (the "cycles" clock) in addition to Timer 0 (the
default, "adjustable clock"). The objective is to allow taprio/etf
offloading to coexist with PTP vclocks.
Besides the implementation of .getcyclesx64() for i225/i226, to keep
timestamping working when vclocks are in use, we also need to add
support for TX and RX timestamping using the free running timer, when
the requesting socket is bound to a vclock.
On the RX side, i225/i226 can be configured to store the values of two
timers in the received packet metadata area, so it's a matter of
configuring the right registers and retrieving the right timestamp.
The TX is a bit more involved because the hardware stores a single
timestamp (with the selected timer in the TX descriptor) into one of
the timestamp registers.
Note some changes at how the timestamps are done for RX, the
conversion and adjustment of timestamps are now done closer to the
consumption of the timestamp instead of near the reception.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
We can re-use the IGC_SET_FLAG() macro to simplify setting some values
in the TX data descriptor. With the macro it's easier to get the
meaning of the operations.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/mac80211/rx.c
91535613b609 ("wifi: mac80211: don't drop all unprotected public action frames")
6c02fab72429 ("wifi: mac80211: split ieee80211_drop_unencrypted_mgmt() return value")
Adjacent changes:
drivers/net/ethernet/apm/xgene/xgene_enet_main.c
61471264c018 ("net: ethernet: apm: Convert to platform remove callback returning void")
d2ca43f30611 ("net: xgene: Fix unused xgene_enet_of_match warning for !CONFIG_OF")
net/vmw_vsock/virtio_transport.c
64c99d2d6ada ("vsock/virtio: support to send non-linear skb")
53b08c498515 ("vsock/virtio: initialize the_virtio_vsock before using VQs")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'ethtool_convert_link_mode_to_legacy_u32' method does not allow us to
advertise 2500M speed support and TP (twisted pair) properly. Convert to
'ethtool_link_ksettings_test_link_mode' to advertise supported speed and
eliminate ambiguity.
Fixes: 8c5ad0dae93c ("igc: Add ethtool support")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231019203641.3661960-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect netdev->name to be NUL-terminated based on its use with format
strings:
| if (q_vector->rx.ring && q_vector->tx.ring)
| sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
Furthermore, we do not need NUL-padding as netdev is already
zero-allocated:
| netdev = alloc_etherdev_mq(sizeof(struct igc_adapter),
| IGC_MAX_TX_QUEUES);
...
alloc_etherdev() -> alloc_etherdev_mq() -> alloc_etherdev_mqs() ->
alloc_netdev_mqs() ...
| p = kvzalloc(alloc_size, GFP_KERNEL_ACCOUNT | __GFP_RETRY_MAYFAIL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-10-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Get ahead of the game and fix all the -Wformat=2 noted warnings in the
intel drivers directory.
There are one set of i40e and iavf warnings I couldn't figure out how to
fix because the driver is already using vsnprintf without an explicit
"const char *" format string.
Tested with both gcc-12 and clang-15. I found gcc-12 runs clean after
this series but clang-15 is a little worried about the vsnprintf lines.
summary of warnings:
drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c:148:34: warning: format string is not a string literal [-Wformat-nonliteral]
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1416:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1416:24: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1421:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1421:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/igc/igc_ethtool.c:776:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/igc/igc_ethtool.c:776:24: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/igc/igc_ethtool.c:779:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/igc/igc_ethtool.c:779:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/iavf/iavf_ethtool.c:199:34: warning: format string is not a string literal [-Wformat-nonliteral]
drivers/net/ethernet/intel/igb/igb_ethtool.c:2360:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/igb/igb_ethtool.c:2360:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/igb/igb_ethtool.c:2363:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/igb/igb_ethtool.c:2363:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:208:34: warning: format string is not a string literal [-Wformat-nonliteral]
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2515:23: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2515:23: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2519:23: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2519:23: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/ice/ice_ethtool.c:1064:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ice/ice_ethtool.c:1064:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/ice/ice_ethtool.c:1084:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ice/ice_ethtool.c:1084:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/ice/ice_ethtool.c:1100:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ice/ice_ethtool.c:1100:24: note: treat the string as an argument to avoid this
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When users attempt to obtain the coalesce setting using the
ethtool command, current code always returns 0 for tx-usecs.
This is because I225/6 always uses a queue pair setting, hence
tx_coalesce_usecs does not return a value during the
igc_ethtool_get_coalesce() callback process. The pair queue
condition checking in igc_ethtool_get_coalesce() is removed by
this patch so that the user gets information of the value of tx-usecs.
Even if i225/6 is using queue pair setting, there is no harm in
notifying the user of the tx-usecs. The implementation of the current
code may have previously been a copy of the legacy code i210.
Since I225 has the queue pair setting enabled, tx-usecs will always adhere
to the user-set rx-usecs value. An error message will appear when the user
attempts to set the tx-usecs value for the input parameters because,
by default, they should only set the rx-usecs value.
This patch also adds the helper function to get the
previous rx coalesce value similar to tx coalesce.
How to test:
User can get the coalesce value using ethtool command.
Example command:
Get: ethtool -c <interface>
Previous output:
rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a
tx-usecs: 0
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a
New output:
rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a
tx-usecs: 3
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a
Fixes: 8c5ad0dae93c ("igc: Add ethtool support")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230919170331.1581031-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When an XDP redirect happens before the link is ready, that
transmission will not finish and will timeout, causing an adapter
reset. If the redirects do not stop, the adapter will not stop
resetting.
Wait for the driver to signal that there's a carrier before allowing
transmissions to proceed.
Previous code was relying that when __IGC_DOWN is cleared, the NIC is
ready to transmit as all the queues are ready, what happens is that
the carrier presence will only be signaled later, after the watchdog
workqueue has a chance to run. And during this interval (between
clearing __IGC_DOWN and the watchdog running) if any transmission
happens the timeout is emitted (detected by igc_tx_timeout()) which
causes the reset, with the potential for the infinite loop.
Fixes: 4ff320361092 ("igc: Add support for XDP_REDIRECT action")
Reported-by: Ferenc Fejes <ferenc.fejes@ericsson.com>
Closes: https://lore.kernel.org/netdev/0caf33cf6adb3a5bf137eeaa20e89b167c9986d5.camel@ericsson.com/
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Ferenc Fejes <ferenc.fejes@ericsson.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igc devices can use as low as 64 descriptors.
This change will unify igc with other drivers.
Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64")
Fixes: 0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
With the 10us interval, we were seeing PTM transactions take around 12us.
Hardware team suggested this interval could be lowered to 1us which was
confirmed with PCIe sniffer. With the 1us interval, PTM dialogs took
around 2us.
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for using the four sets of timestamping registers that
i225/i226 have available for TX.
In some workloads, where multiple applications request hardware
transmission timestamps, it was possible that some of those requests
were denied because the only in use register was already occupied.
This is also in preparation to future support for hardware
timestamping with multiple PTP domains. With multiple domains chances
of multiple TX timestamps being requested at the same time increase.
Before:
$ sudo ./ntpperf -i enp3s0 -m 10:22:22:22:22:21 -d 192.168.1.3 -s 172.18.0.0/16 -I -H -o 37
| responses | TX timestamp offset (ns)
rate clients | lost invalid basic xleave | min mean max stddev
1000 100 0.00% 0.00% 0.00% 100.00% +1 +41 +73 13
1500 150 0.00% 0.00% 0.00% 100.00% +9 +49 +87 15
2250 225 0.00% 0.00% 0.00% 100.00% +9 +42 +79 13
3375 337 0.00% 0.00% 0.00% 100.00% +11 +46 +81 13
5062 506 0.00% 0.00% 0.00% 100.00% +7 +44 +80 13
7593 759 0.00% 0.00% 0.00% 100.00% +9 +44 +79 12
11389 1138 0.00% 0.00% 0.00% 100.00% +14 +51 +87 13
17083 1708 0.00% 0.00% 0.00% 100.00% +1 +41 +80 14
25624 2562 0.00% 0.00% 0.00% 100.00% +11 +50 +5107 51
38436 3843 0.00% 0.00% 0.00% 100.00% -2 +36 +7843 38
57654 5765 0.00% 0.00% 0.00% 100.00% +4 +42 +10503 69
86481 8648 0.00% 0.00% 0.00% 100.00% +11 +54 +5492 65
129721 12972 0.00% 0.00% 0.00% 100.00% +31 +2680 +6942 2606
194581 16384 16.79% 0.00% 0.87% 82.34% +73 +4444 +15879 3116
291871 16384 35.05% 0.00% 1.53% 63.42% +188 +5381 +17019 3035
437806 16384 54.95% 0.00% 2.55% 42.50% +233 +6302 +13885 2846
After:
$ sudo ./ntpperf -i enp3s0 -m 10:22:22:22:22:21 -d 192.168.1.3 -s 172.18.0.0/16 -I -H -o 37
| responses | TX timestamp offset (ns)
rate clients | lost invalid basic xleave | min mean max stddev
1000 100 0.00% 0.00% 0.00% 100.00% -20 +12 +43 13
1500 150 0.00% 0.00% 0.00% 100.00% -23 +18 +57 14
2250 225 0.00% 0.00% 0.00% 100.00% -2 +33 +67 13
3375 337 0.00% 0.00% 0.00% 100.00% +1 +38 +76 13
5062 506 0.00% 0.00% 0.00% 100.00% +9 +52 +93 14
7593 759 0.00% 0.00% 0.00% 100.00% +11 +47 +82 13
11389 1138 0.00% 0.00% 0.00% 100.00% -9 +27 +74 13
17083 1708 0.00% 0.00% 0.00% 100.00% -13 +25 +66 14
25624 2562 0.00% 0.00% 0.00% 100.00% -8 +28 +65 13
38436 3843 0.00% 0.00% 0.00% 100.00% -13 +28 +69 13
57654 5765 0.00% 0.00% 0.00% 100.00% -11 +32 +71 14
86481 8648 0.00% 0.00% 0.00% 100.00% +2 +44 +83 14
129721 12972 15.36% 0.00% 0.35% 84.29% -2 +2248 +22907 4252
194581 16384 42.98% 0.00% 1.98% 55.04% -4 +5278 +65039 5856
291871 16384 54.33% 0.00% 2.21% 43.46% -3 +6306 +22608 5665
We can see that with 4 registers, as expected, we are able to handle a
increasing number of requests more consistently, but as soon as all
registers are in use, the decrease in quality of service happens in a
sharp step.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/net/inet_sock.h
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
c274af224269 ("inet: introduce inet->inet_flags")
https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/
Adjacent changes:
drivers/net/bonding/bond_alb.c
e74216b8def3 ("bonding: fix macvlan over alb bond support")
f11e5bd159b0 ("bonding: support balance-alb with openvswitch")
drivers/net/ethernet/broadcom/bgmac.c
d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()")
23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()")
drivers/net/ethernet/broadcom/genet/bcmmii.c
32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()")
acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()")
net/sctp/socket.c
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The IGC_PTM_CTRL_SHRT_CYC defines the time between two consecutive PTM
requests. The bit resolution of this field is six bits. That bit five was
missing in the mask. This patch comes to correct the typo in the
IGC_PTM_CTRL_SHRT_CYC macro.
Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20230821171721.2203572-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/intel/igc/igc_main.c
06b412589eef ("igc: Add lock to safeguard global Qbv variables")
d3750076d464 ("igc: Add TransmissionOverrun counter")
drivers/net/ethernet/microsoft/mana/mana_en.c
a7dfeda6fdec ("net: mana: Fix MANA VF unload when hardware is unresponsive")
a9ca9f9ceff3 ("page_pool: split types and declarations from page_pool.h")
92272ec4107e ("eth: add missing xdp.h includes in drivers")
net/mptcp/protocol.h
511b90e39250 ("mptcp: fix disconnect vs accept race")
b8dc6d6ce931 ("mptcp: fix rcv buffer auto-tuning")
tools/testing/selftests/net/mptcp/mptcp_join.sh
c8c101ae390a ("selftests: mptcp: join: fix 'implicit EP' test")
03668c65d153 ("selftests: mptcp: join: rework detailed report")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Access to shared variables through hrtimer requires locking in order
to protect the variables because actions to write into these variables
(oper_gate_closed, admin_gate_closed, and qbv_transition) might potentially
occur simultaneously. This patch provides a locking mechanisms to avoid
such scenarios.
Fixes: 175c241288c0 ("igc: Fix TX Hang issue when QBV Gate is closed")
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230807205129.3129346-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2023-08-03
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 84 files changed, 4026 insertions(+), 562 deletions(-).
The main changes are:
1) Add SO_REUSEPORT support for TC bpf_sk_assign from Lorenz Bauer,
Daniel Borkmann
2) Support new insns from cpu v4 from Yonghong Song
3) Non-atomically allocate freelist during prefill from YiFei Zhu
4) Support defragmenting IPv(4|6) packets in BPF from Daniel Xu
5) Add tracepoint to xdp attaching failure from Leon Hwang
6) struct netdev_rx_queue and xdp.h reshuffling to reduce
rebuild time from Jakub Kicinski
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
net: invert the netdevice.h vs xdp.h dependency
net: move struct netdev_rx_queue out of netdevice.h
eth: add missing xdp.h includes in drivers
selftests/bpf: Add testcase for xdp attaching failure tracepoint
bpf, xdp: Add tracepoint to xdp attaching failure
selftests/bpf: fix static assert compilation issue for test_cls_*.c
bpf: fix bpf_probe_read_kernel prototype mismatch
riscv, bpf: Adapt bpf trampoline to optimized riscv ftrace framework
libbpf: fix typos in Makefile
tracing: bpf: use struct trace_entry in struct syscall_tp_t
bpf, devmap: Remove unused dtab field from bpf_dtab_netdev
bpf, cpumap: Remove unused cmap field from bpf_cpu_map_entry
netfilter: bpf: Only define get_proto_defrag_hook() if necessary
bpf: Fix an array-index-out-of-bounds issue in disasm.c
net: remove duplicate INDIRECT_CALLABLE_DECLARE of udp[6]_ehashfn
docs/bpf: Fix malformed documentation
bpf: selftests: Add defrag selftests
bpf: selftests: Support custom type and proto for client sockets
bpf: selftests: Support not connecting client socket
netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link
...
====================
Link: https://lore.kernel.org/r/20230803174845.825419-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Handful of drivers currently expect to get xdp.h by virtue
of including netdevice.h. This will soon no longer be the case
so add explicit includes.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230803010230.1755386-2-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Xeon validation group has been carrying out some loaded tests
with various HW configurations, and they have seen some transmit
queue time out happening during the test. This will cause the
reset adapter function to be called by igc_tx_timeout().
Similar race conditions may arise when the interface is being brought
down and up in igc_reinit_locked(), an interrupt being generated, and
igc_clean_tx_irq() being called to complete the TX.
When the igc_tx_timeout() function is invoked, this patch will turn
off all TX ring HW queues during igc_down() process. TX ring HW queues
will be activated again during the igc_configure_tx_ring() process
when performing the igc_up() procedure later.
This patch also moved existing igc_disable_tx_ring_hw() to avoid using
forward declaration.
Kernel trace:
[ 7678.747813] ------------[ cut here ]------------
[ 7678.757914] NETDEV WATCHDOG: enp1s0 (igc): transmit queue 2 timed out
[ 7678.770117] WARNING: CPU: 0 PID: 13 at net/sched/sch_generic.c:525 dev_watchdog+0x1ae/0x1f0
[ 7678.784459] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat
nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO)
cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO)
vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO)
sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO)
dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO)
svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO)
fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO)
regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel
snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 7678.784496] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight
configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid
mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a
usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore
crct10dif_generic ptp crct10dif_common usb_common pps_core
[ 7679.200403] RIP: 0010:dev_watchdog+0x1ae/0x1f0
[ 7679.210201] Code: 28 e9 53 ff ff ff 4c 89 e7 c6 05 06 42 b9 00 01 e8 17 d1 fb ff 44 89 e9 4c
89 e6 48 c7 c7 40 ad fb 81 48 89 c2 e8 52 62 82 ff <0f> 0b e9 72 ff ff ff 65 8b 05 80 7d 7c 7e
89 c0 48 0f a3 05 0a c1
[ 7679.245438] RSP: 0018:ffa00000001f7d90 EFLAGS: 00010282
[ 7679.256021] RAX: 0000000000000000 RBX: ff11000109938440 RCX: 0000000000000000
[ 7679.268710] RDX: ff11000361e26cd8 RSI: ff11000361e1b880 RDI: ff11000361e1b880
[ 7679.281314] RBP: ffa00000001f7da8 R08: ff1100035f8fffe8 R09: 0000000000027ffb
[ 7679.293840] R10: 0000000000001f0a R11: ff1100035f840000 R12: ff11000109938000
[ 7679.306276] R13: 0000000000000002 R14: dead000000000122 R15: ffa00000001f7e18
[ 7679.318648] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 7679.332064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7679.342757] CR2: 00007ffff7fca168 CR3: 000000013b08a006 CR4: 0000000000471ef8
[ 7679.354984] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 7679.367207] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 7679.379370] PKRU: 55555554
[ 7679.386446] Call Trace:
[ 7679.393152] <TASK>
[ 7679.399363] ? __pfx_dev_watchdog+0x10/0x10
[ 7679.407870] call_timer_fn+0x31/0x110
[ 7679.415698] expire_timers+0xb2/0x120
[ 7679.423403] run_timer_softirq+0x179/0x1e0
[ 7679.431532] ? __schedule+0x2b1/0x820
[ 7679.439078] __do_softirq+0xd1/0x295
[ 7679.446426] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 7679.454867] run_ksoftirqd+0x22/0x30
[ 7679.462058] smpboot_thread_fn+0xb7/0x160
[ 7679.469670] kthread+0xcd/0xf0
[ 7679.476097] ? __pfx_kthread+0x10/0x10
[ 7679.483211] ret_from_fork+0x29/0x50
[ 7679.490047] </TASK>
[ 7679.495204] ---[ end trace 0000000000000000 ]---
[ 7679.503179] igc 0000:01:00.0 enp1s0: Register Dump
[ 7679.511230] igc 0000:01:00.0 enp1s0: Register Name Value
[ 7679.519892] igc 0000:01:00.0 enp1s0: CTRL 181c0641
[ 7679.528782] igc 0000:01:00.0 enp1s0: STATUS 40280683
[ 7679.537551] igc 0000:01:00.0 enp1s0: CTRL_EXT 10000040
[ 7679.546284] igc 0000:01:00.0 enp1s0: MDIC 180a3800
[ 7679.554942] igc 0000:01:00.0 enp1s0: ICR 00000081
[ 7679.563503] igc 0000:01:00.0 enp1s0: RCTL 04408022
[ 7679.571963] igc 0000:01:00.0 enp1s0: RDLEN[0-3] 00001000 00001000 00001000 00001000
[ 7679.583075] igc 0000:01:00.0 enp1s0: RDH[0-3] 00000068 000000b6 0000000f 00000031
[ 7679.594162] igc 0000:01:00.0 enp1s0: RDT[0-3] 00000066 000000b2 0000000e 00000030
[ 7679.605174] igc 0000:01:00.0 enp1s0: RXDCTL[0-3] 02040808 02040808 02040808 02040808
[ 7679.616196] igc 0000:01:00.0 enp1s0: RDBAL[0-3] 1bb7c000 1bb7f000 1bb82000 0ef33000
[ 7679.627242] igc 0000:01:00.0 enp1s0: RDBAH[0-3] 00000001 00000001 00000001 00000001
[ 7679.638256] igc 0000:01:00.0 enp1s0: TCTL a503f0fa
[ 7679.646607] igc 0000:01:00.0 enp1s0: TDBAL[0-3] 2ba4a000 1bb6f000 1bb74000 1bb79000
[ 7679.657609] igc 0000:01:00.0 enp1s0: TDBAH[0-3] 00000001 00000001 00000001 00000001
[ 7679.668551] igc 0000:01:00.0 enp1s0: TDLEN[0-3] 00001000 00001000 00001000 00001000
[ 7679.679470] igc 0000:01:00.0 enp1s0: TDH[0-3] 000000a7 0000002d 000000bf 000000d9
[ 7679.690406] igc 0000:01:00.0 enp1s0: TDT[0-3] 000000a7 0000002d 000000bf 000000d9
[ 7679.701264] igc 0000:01:00.0 enp1s0: TXDCTL[0-3] 02100108 02100108 02100108 02100108
[ 7679.712123] igc 0000:01:00.0 enp1s0: Reset adapter
[ 7683.085967] igc 0000:01:00.0 enp1s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 8086.945561] ------------[ cut here ]------------
Entering kdb (current=0xffffffff8220b200, pid 0) on processor 0
Oops: (null) due to oops @ 0xffffffff81573888
RIP: 0010:dql_completed+0x148/0x160
Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db 0f 95
c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89
c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc
RSP: 0018:ffa0000000003e00 EFLAGS: 00010287
RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000
RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480
RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28
R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9
R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048
FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? igc_poll+0x1a9/0x14d0 [igc]
__napi_poll+0x2e/0x1b0
net_rx_action+0x126/0x250
__do_softirq+0xd1/0x295
irq_exit_rcu+0xc5/0xf0
common_interrupt+0x86/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x27/0x40
RIP: 0010:cpuidle_enter_state+0xd3/0x3e0
Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b
de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf
4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d
RSP: 0018:ffffffff82203df0 EFLAGS: 00000202
RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f
RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000
RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018
R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000
R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002
cpuidle_enter+0x2e/0x50
call_cpuidle+0x23/0x40
do_idle+0x1be/0x220
cpu_startup_entry+0x20/0x30
rest_init+0xb5/0xc0
arch_call_rest_init+0xe/0x30
start_kernel+0x448/0x760
x86_64_start_kernel+0x109/0x150
secondary_startup_64_no_verify+0xe0/0xeb
</TASK>
more>
[0]kdb>
[0]kdb>
[0]kdb> go
Catastrophic error detected
kdb_continue_catastrophic=0, type go a second time if you really want to
continue
[0]kdb> go
Catastrophic error detected
kdb_continue_catastrophic=0, attempting to continue
[ 8086.955689] refcount_t: underflow; use-after-free.
[ 8086.955697] WARNING: CPU: 0 PID: 0 at lib/refcount.c:28 refcount_warn_saturate+0xc2/0x110
[ 8086.955706] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat
nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO)
cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO)
svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO)
svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO)
smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO)
pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO)
svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O)
ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437
snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg
snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 8086.955751] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm
fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic
pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa
scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi
crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common
usb_common pps_core
[ 8086.955784] RIP: 0010:refcount_warn_saturate+0xc2/0x110
[ 8086.955788] Code: 01 e8 82 e7 b4 ff 0f 0b 5d c3 cc cc cc cc 80 3d 68 c6 eb 00 00 75 81
48 c7 c7 a0 87 f6 81 c6 05 58 c6 eb 00 01 e8 5e e7 b4 ff <0f> 0b 5d c3 cc cc cc cc 80 3d
42 c6 eb 00 00 0f 85 59 ff ff ff 48
[ 8086.955790] RSP: 0018:ffa0000000003da0 EFLAGS: 00010286
[ 8086.955793] RAX: 0000000000000000 RBX: ff1100011da40ee0 RCX: ff11000361e1b888
[ 8086.955794] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ff11000361e1b880
[ 8086.955795] RBP: ffa0000000003da0 R08: 80000000ffff9f45 R09: ffa0000000003d28
[ 8086.955796] R10: ff1100035f840000 R11: 0000000000000028 R12: ff11000319ff8000
[ 8086.955797] R13: ff1100011bb79d60 R14: 00000000ffffffd6 R15: ff1100037039cb00
[ 8086.955798] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 8086.955800] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8086.955801] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8
[ 8086.955803] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8086.955803] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 8086.955804] PKRU: 55555554
[ 8086.955805] Call Trace:
[ 8086.955806] <IRQ>
[ 8086.955808] tcp_wfree+0x112/0x130
[ 8086.955814] skb_release_head_state+0x24/0xa0
[ 8086.955818] napi_consume_skb+0x9c/0x160
[ 8086.955821] igc_poll+0x5d8/0x14d0 [igc]
[ 8086.955835] __napi_poll+0x2e/0x1b0
[ 8086.955839] net_rx_action+0x126/0x250
[ 8086.955843] __do_softirq+0xd1/0x295
[ 8086.955846] irq_exit_rcu+0xc5/0xf0
[ 8086.955851] common_interrupt+0x86/0xa0
[ 8086.955857] </IRQ>
[ 8086.955857] <TASK>
[ 8086.955858] asm_common_interrupt+0x27/0x40
[ 8086.955862] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0
[ 8086.955866] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8
1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75
c8 48 8d 04 49 48 89 ca 48 8d
[ 8086.955867] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202
[ 8086.955869] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f
[ 8086.955870] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000
[ 8086.955871] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018
[ 8086.955872] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000
[ 8086.955873] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002
[ 8086.955875] cpuidle_enter+0x2e/0x50
[ 8086.955880] call_cpuidle+0x23/0x40
[ 8086.955884] do_idle+0x1be/0x220
[ 8086.955887] cpu_startup_entry+0x20/0x30
[ 8086.955889] rest_init+0xb5/0xc0
[ 8086.955892] arch_call_rest_init+0xe/0x30
[ 8086.955895] start_kernel+0x448/0x760
[ 8086.955898] x86_64_start_kernel+0x109/0x150
[ 8086.955900] secondary_startup_64_no_verify+0xe0/0xeb
[ 8086.955904] </TASK>
[ 8086.955904] ---[ end trace 0000000000000000 ]---
[ 8086.955912] ------------[ cut here ]------------
[ 8086.955913] kernel BUG at lib/dynamic_queue_limits.c:27!
[ 8086.955918] invalid opcode: 0000 [#1] SMP
[ 8086.955922] RIP: 0010:dql_completed+0x148/0x160
[ 8086.955925] Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db
0f 95 c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89
c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc
[ 8086.955927] RSP: 0018:ffa0000000003e00 EFLAGS: 00010287
[ 8086.955928] RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000
[ 8086.955929] RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480
[ 8086.955930] RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28
[ 8086.955931] R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9
[ 8086.955932] R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048
[ 8086.955933] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 8086.955934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8086.955935] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8
[ 8086.955936] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8086.955937] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 8086.955938] PKRU: 55555554
[ 8086.955939] Call Trace:
[ 8086.955939] <IRQ>
[ 8086.955940] ? igc_poll+0x1a9/0x14d0 [igc]
[ 8086.955949] __napi_poll+0x2e/0x1b0
[ 8086.955952] net_rx_action+0x126/0x250
[ 8086.955956] __do_softirq+0xd1/0x295
[ 8086.955958] irq_exit_rcu+0xc5/0xf0
[ 8086.955961] common_interrupt+0x86/0xa0
[ 8086.955964] </IRQ>
[ 8086.955965] <TASK>
[ 8086.955965] asm_common_interrupt+0x27/0x40
[ 8086.955968] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0
[ 8086.955971] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00
31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00
49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d
[ 8086.955972] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202
[ 8086.955973] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f
[ 8086.955974] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000
[ 8086.955974] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018
[ 8086.955975] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000
[ 8086.955976] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002
[ 8086.955978] cpuidle_enter+0x2e/0x50
[ 8086.955981] call_cpuidle+0x23/0x40
[ 8086.955984] do_idle+0x1be/0x220
[ 8086.955985] cpu_startup_entry+0x20/0x30
[ 8086.955987] rest_init+0xb5/0xc0
[ 8086.955990] arch_call_rest_init+0xe/0x30
[ 8086.955992] start_kernel+0x448/0x760
[ 8086.955994] x86_64_start_kernel+0x109/0x150
[ 8086.955996] secondary_startup_64_no_verify+0xe0/0xeb
[ 8086.955998] </TASK>
[ 8086.955999] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype
nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO)
rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO)
svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO)
svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO)
smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO)
pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO)
svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O)
ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437
snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg
snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 8086.956029] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm
fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic
pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa
scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi
crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common
usb_common pps_core
[16762.543675] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.593 msecs
[16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.595 msecs
[16762.543673] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.495 msecs
[16762.543679] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs
[16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.598 msecs
[16762.543690] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.605 msecs
[16762.543684] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs
[16762.543693] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.613 msecs
[16762.543784] ---[ end trace 0000000000000000 ]---
[16762.849099] RIP: 0010:dql_completed+0x148/0x160
PANIC: Fatal exception in interrupt
Fixes: 9b275176270e ("igc: Add ndo_tx_timeout support")
Tested-by: Alejandra Victoria Alcaraz <alejandra.victoria.alcaraz@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In normal operation, each populated queue item has
next_to_watch pointing to the last TX desc of the packet,
while each cleaned item has it set to 0. In particular,
next_to_use that points to the next (necessarily clean)
item to use has next_to_watch set to 0.
When the TX queue is used both by an application using
AF_XDP with ZEROCOPY as well as a second non-XDP application
generating high traffic, the queue pointers can get in
an invalid state where next_to_use points to an item
where next_to_watch is NOT set to 0.
However, the implementation assumes at several places
that this is never the case, so if it does hold,
bad things happen. In particular, within the loop inside
of igc_clean_tx_irq(), next_to_clean can overtake next_to_use.
Finally, this prevents any further transmission via
this queue and it never gets unblocked or signaled.
Secondly, if the queue is in this garbled state,
the inner loop of igc_clean_tx_ring() will never terminate,
completely hogging a CPU core.
The reason is that igc_xdp_xmit_zc() reads next_to_use
before acquiring the lock, and writing it back
(potentially unmodified) later. If it got modified
before locking, the outdated next_to_use is written
pointing to an item that was already used elsewhere
(and thus next_to_watch got written).
Fixes: 9acf59a752d4 ("igc: Enable TX via AF_XDP zero-copy")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230717175444.3217831-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add TransmissionOverrun as per defined by IEEE 802.1Q Bridges.
TransmissionOverrun counter shall be incremented if the implementation
detects that a frame from a given queue is still being transmitted by
the MAC when that gate-close event for that queue occurs.
This counter is utilised by the Certification conformance test to
inform the user application whether any packets are currently being
transmitted on a particular queue during a gate-close event.
Intel Discrete I225/I226 have a mechanism to not transmit a packets if
the gate open time is insufficient for the packet transmission by setting
the Strict_End bit. Thus, it is expected for this counter to be always
zero at this moment.
Inspired from enetc_taprio_stats() and enetc_taprio_queue_stats(), now
driver also report the tx_overruns counter per traffic class.
User can get this counter by using below command:
1) tc -s qdisc show dev <interface> root
2) tc -s class show dev <interface>
Test Result (Before):
class mq :1 root
Sent 1289 bytes 20 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class mq :2 root
Sent 124 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class mq :3 root
Sent 46028 bytes 86 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class mq :4 root
Sent 2596 bytes 14 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Test Result (After):
class taprio 100:1 root
Sent 8491 bytes 38 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Transmit overruns: 0
class taprio 100:2 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Transmit overruns: 0
class taprio 100:3 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Transmit overruns: 0
class taprio 100:4 root
Sent 994 bytes 11 pkt (dropped 0, overlimits 0 requeues 1)
backlog 0b 0p requeues 1
Transmit overruns: 0
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230714201428.1718097-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The insertion of an empty frame was introduced with
commit db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit")
in order to ensure that the current cycle has at least one packet if
there is some packet to be scheduled for the next cycle.
However, the current implementation does not properly check if
a packet is already scheduled for the current cycle. Currently,
an empty packet is always inserted if and only if
txtime >= end_of_cycle && txtime > last_tx_cycle
but since last_tx_cycle is always either the end of the current
cycle (end_of_cycle) or the end of a previous cycle, the
second part (txtime > last_tx_cycle) is always true unless
txtime == last_tx_cycle.
What actually needs to be checked here is if the last_tx_cycle
was already written within the current cycle, so an empty frame
should only be inserted if and only if
txtime >= end_of_cycle && end_of_cycle > last_tx_cycle.
This patch does not only avoid an unnecessary insertion, but it
can actually be harmful to insert an empty packet if packets
are already scheduled in the current cycle, because it can lead
to a situation where the empty packet is actually processed
as the first packet in the upcoming cycle shifting the packet
with the first_flag even one cycle into the future, finally leading
to a TX hang.
The TX hang can be reproduced on a i225 with:
sudo tc qdisc replace dev enp1s0 parent root handle 100 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time 0 \
sched-entry S 01 300000 \
flags 0x1 \
txtime-delay 500000 \
clockid CLOCK_TAI
sudo tc qdisc replace dev enp1s0 parent 100:1 etf \
clockid CLOCK_TAI \
delta 500000 \
offload \
skip_sock_check
and traffic generator
sudo trafgen -i traffic.cfg -o enp1s0 --cpp -n0 -q -t1400ns
with traffic.cfg
#define ETH_P_IP 0x0800
{
/* Ethernet Header */
0x30, 0x1f, 0x9a, 0xd0, 0xf0, 0x0e, # MAC Dest - adapt as needed
0x24, 0x5e, 0xbe, 0x57, 0x2e, 0x36, # MAC Src - adapt as needed
const16(ETH_P_IP),
/* IPv4 Header */
0b01000101, 0, # IPv4 version, IHL, TOS
const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header))
const16(2), # IPv4 ident
0b01000000, 0, # IPv4 flags, fragmentation off
64, # IPv4 TTL
17, # Protocol UDP
csumip(14, 33), # IPv4 checksum
/* UDP Header */
10, 0, 48, 1, # IP Src - adapt as needed
10, 0, 48, 10, # IP Dest - adapt as needed
const16(5555), # UDP Src Port
const16(6666), # UDP Dest Port
const16(1008), # UDP length (UDP header 8 bytes + payload length)
csumudp(14, 34), # UDP checksum
/* Payload */
fill('W', 1000),
}
and the observed message with that is for example
igc 0000:01:00.0 enp1s0: Detected Tx Unit Hang
Tx Queue <0>
TDH <32>
TDT <3c>
next_to_use <3c>
next_to_clean <32>
buffer_info[next_to_clean]
time_stamp <ffff26a8>
next_to_watch <00000000632a1828>
jiffies <ffff27f8>
desc.status <1048000>
Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
