summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
AgeCommit message (Collapse)AuthorFilesLines
2017-07-26ixgbe: Ensure MAC filter was added before setting MACVLANTony Nguyen1-3/+6
This patch adds a check to ensure that adding the MAC filter was successful before setting the MACVLAN. If it was unsuccessful, propagate the error. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-14ixgbe: fix writes to PFQDEEmil Tantilov1-1/+1
ixgbe_write_qde() was ignoring the qde parameter which resulted in PFQDE.HIDE_VLAN not being set for X550. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: Resolve warnings for -Wimplicit-fallthroughTony Nguyen1-4/+3
This patch adds/changes fall through comments to address new warnings produced by gcc 7. Fixed formatting on a couple of comments in the function. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: Add error checking to setting VF MACTony Nguyen1-13/+41
Currently, when setting a VF MAC address there are no error checks to ensure that the MAC filter was successfully added. This patch adds additional error checks, reporting, and propagation of errors. It also will not set the MAC address unless adding the MAC filter was successful. With these changes, setting the mac address to zeros can no longer call ixgbe_set_vf_mac() as adding a zero MAC address filter is not valid. Instead directly delete the filter and, if successful, clear the MAC address. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-30ixgbe: Check for RSS key before setting valueTony Nguyen1-1/+1
The RSS key is being repopulated every time the interface is brought up regardless of whether there is an existing value. If the user sets the RSS key and the interface is brought up (e.g. reset), the user specified RSS key will be overwritten. This patch changes the rss_key to a pointer so we can check to see if the key has been populated and preserve it accordingly. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-30ixgbe: Allow setting zero MAC address for VFTony Nguyen1-10/+18
Currently, there is no logic that allows a VF's MAC address to be removed from the RAR table. Allow the user to specify a zero MAC address in order to clear the VF's MAC address from the RAR table. This functionality is also utilized by libvirt when removing VFs. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-30ixgbe: clean macvlan MAC filter table on VF resetEmil Tantilov1-52/+53
Flush the macvlan filters on VF reset to avoid conflict with other VFs that may end up using the same MAC address. The main change here is the call to ixgbe_set_vf_macvlan() with index 0. Moved ixgbe_set_vf_macvlan() in front of ixgbe_vf_reset_event() to avoid adding a prototype. Reported-by: Sritej Kanakadandi Sritej Rama <skanakad@cisco.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-18ixgbe: do not use adapter->num_vfs when setting VFs via module parameterEmil Tantilov1-25/+25
Avoid setting adapter->num_vfs early in the init code path when using the max_vfs module parameter by passing it to ixgbe_enable_sriov() as a function parameter. This fixes an issue where if we failed to allocate vfinfo in __ixgbe_enable_sriov() the driver will crash with NULL pointer in ixgbe_disable_sriov() when attempting to free the vfinfo struct based on adapter->num_vfs. Also it cleans up the assignment of adapter->num_vfs since now it will only be set in __ixgbe_enable_sriov() and cleared in ixgbe_disable_sriov(). Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-18ixgbe: return early instead of wrap block in if statementEmil Tantilov1-44/+41
Since we exit at the end of the block, we can save a level of indentation by performing an early return, and make the next several sections of code more legible, with fewer 80 character line breaks. Also moved allocating vfinfo at the beginning and the notification for enabling SRIOV at the end of the function when we know that it will succeed. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-18ixgbe: move num_vfs_macvlans allocation into separate functionEmil Tantilov1-19/+29
Move the code allocating memory for list of MAC addresses that the VFs can use for MACVLAN into its own function. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-18ixgbe: Avoid Tx hang by not allowing more than the number of VFs supported.Usha Ketineni1-3/+23
When DCB is enabled, add checks to ensure creation of number of VF's is valid based on the traffic classes configured by the device. Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com> Tested-by: Ronald Bynoe <ronald.j.bynoe@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-04ixgbe: Add PF support for VF promiscuous modeDon Skidmore1-6/+41
This patch extends the xcast mailbox message to include support for unicast promiscuous mode. To allow a VF to enter this mode the PF must be in promiscuous mode. A later patch will add the support needed in the VF driver (ixgbevf) Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-04ixgbe: test for trust in macvlan adjustments for VFKen Cox1-1/+2
There are two methods for setting mac addresses in a Macvlan, that differentiate themselves in the function macvlan_set_mac_Address. If the macvlan mode is passthru, then we use the dev_set_mac_address method, otherwise we use the dev_uc api via macvlan_sync_addresses. The latter method (which would stem from using any non-passthru mode, like bridge, or vepa), calls down into the driver in a path that terminates in ixgbevf_set_uc_addr_vf, which sends a IXGBE_VF_SET_MACVLAN message, which causes the pf to spawn the noted error message. This occurs because it appears that the guest is trying to delete the mac address of the macvlan before adding another. The other path in macvlan_set_mac_address uses dev_set_mac_address, which calls into ixgbevf_set_mac which uses the IXGBE_VF_SET_MAC_ADDR to the pf to set the macvlan mac address. The discrepancy here is in the handlers. The handler function for IXGBE_VF_SET_MAC_ADDR (ixgbe_set_vf_mac_addr) has a check for the vfinfo[].trusted bit to allow the operation if the vf is trusted. In comparison, the IXGBE_VF_SET_MACVLAN message handler (ixgbe_set_vf_macvlan_msg) has no such check of the trusted bit. Signed-off-by: Ken Cox <jkc@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-24Merge branch '10GbE' of ↵David S. Miller1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2016-09-23 This series contains updates to ixgbe and ixgbevf. Emil provides several changes, first simplifies the logic for setting VLAN filtering by checking the VMDQ flag and the old 82598 MAC, instead of having to maintain a list of MAC types. Then made two functions static that are used only within the file, a by-product is sparse is now happy. Added spinlocks to make sure that the MTU configuration is handled properly. Fixed an issue where when SR-IOV is enabled while the ixgbevf driver is loaded would result in all mailbox requests being rejected by ixgbe, so call ixgbe_sriov_reinit() before pci_enable_sriov() to ensure mailbox requests are properly handled. Mark resolves a NULL pointer issue by simply setting the read and write *_ref_mdi pointers for x550em_a devices. Then clearly indicates within ethtool that all MACs support pause frames and made sure that the advertising is set to the requested mode. Fixed an issue where MDIO_PRTAD_NONE was not being used consistently to indicate no PHY address. Alex fixes an issue, where the support for multiple queues when SR-IOV is enabled was added but the support was not reported. With that, fix an issue where the hardware redirection table could support more queues then the PF currently has when SR-IOV is enabled, so use the RSS mask to trim off the bits that are not used. Lastly, instead of limiting the VFs if we do not use 4 queues for RSS in the PF, we can instead just limit the RSS queues used to a power of 2. We can now support use cases where VFs are using more queues than the PF is currently using and can support RSS if so desired. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-24net: Update API for VF vlan protocol 802.1ad supportMoshe Shemesh1-1/+4
Introduce new rtnl UAPI that exposes a list of vlans per VF, giving the ability for user-space application to specify it for the VF, as an option to support 802.1ad. We adjusted IP Link tool to support this option. For future use cases, the new UAPI supports multiple vlans. For now we limit the list size to a single vlan in kernel. Add IFLA_VF_VLAN_LIST in addition to IFLA_VF_VLAN to keep backward compatibility with older versions of IP Link tool. Add a vlan protocol parameter to the ndo_set_vf_vlan callback. We kept 802.1Q as the drivers' default vlan protocol. Suitable ip link tool command examples: Set vf vlan protocol 802.1ad: ip link set eth0 vf 1 vlan 100 proto 802.1ad Set vf to VST (802.1Q) mode: ip link set eth0 vf 1 vlan 100 proto 802.1Q Or by omitting the new parameter ip link set eth0 vf 1 vlan 100 Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23ixgbe: reset before SRIOV init to avoid mailbox issuesEmil Tantilov1-1/+3
Enabling SRIOV while the ixgbevf driver is loaded will result in all mailbox requests from ixgbevf_open() being rejected by ixgbe because adapter->clear_to_send is set to false on reset. Call ixgbe_sriov_reinit() before pci_enable_sriov() to make sure that mailbox requests are handled from the time ixgbevf is loaded. Reported-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-29ixgbe: fix spoofed packets with macvlansEmil Tantilov1-0/+1
When setting spoofing, both VLAN and MAC need to be set together. This change resolves an issue where MAC-VLANs on the VF fail to pass traffic due to spoofed packets. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: use BIT() macroJacob Keller1-11/+11
Several areas of ixgbe were written before widespread usage of the BIT(n) macro. With the impending release of GCC 6 and its associated new warnings, some usages such as (1 << 31) have been noted within the ixgbe driver source. Fix these wholesale and prevent future issues by simply using BIT macro instead of hand coded bit shifts. Also fix a few shifts that are shifting values into place by using the 'u' prefix to indicate unsigned. It doesn't strictly matter in these cases because we're not shifting by too large a value, but these are all unsigned values and should be indicated as such. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: set VLAN spoof checking unconditionallyEmil Tantilov1-23/+2
Previously the PF driver would only set VLAN spoof checking if the VF had created VLANs. This was done by setting and checking a counter (vlan_count) whenever a VLAN was created by the VF. However it is possible for the vlan_count to be !=0 while there are no VLANs assigned to the VF due to the count incrementing every time a VLAN 0 is added on ifdown/up, which resulted in VLAN spoofing always being set for those VFs. This patch cleans up the logic by unconditionally setting VLAN based on how the VF is configured (via ip link set ethX vf Y spoofchk on/off). This change also resolves an issue where the VLAN spoofing can remain set even after being disabled by the user due to the driver enabling VLAN spoof checking every time a VLAN is added to the VF, but would only allow changes in the setting if vlan_count != 0. Also default_vf_vlan_id and vlans_enabled were removed from the vf_data_storage structure since they are not being used in the driver. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: consolidate the configuration of spoof checkingEmil Tantilov1-16/+27
Consolidate the logic behind configuring spoof checking: Move the setting of the MAC, VLAN and Ethertype spoof checking into ixgbe_ndo_set_vf_spoofchk(). Change ixgbe_set_mac_anti_spoofing() to set MAC spoofing per VF similar to the VLAN and Ethertype functions - this allows us to call the helper functions in ixgbe_ndo_set_vf_spoofchk() for all spoof check types and only disable MAC spoof checking when creating MACVLAN. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-05ixgbe: add a callback to set the maximum transmit bitrateRostislav Pehlivanov1-1/+1
This commit adds a callback which allows to adjust the maximum transmit bitrate the card can output. This makes it possible to get a smooth traffic instead of the default burst-y behaviour when trying to output e.g. a video stream. Much of the logic needed to get a correct bcnrc_val was taken from the ixgbe_set_vf_rate_limit() function. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-04ixgbe: Do not allow PF to add VLVF entry unless it actually needs itAlexander Duyck1-14/+17
While doing the work on igb I realized there were a few cases where we were still adding VLANs to the VLVF entries for the PF when they were not needed. This patch cleans that up so that the only time we add a PF entry to the VLVF is either for VLAN 0 or if the PF has requested a VLAN that a VF is already using. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-04ixgbe: Extend trust to allow guest to set unicast addresschas williams1-1/+1
When running certain routing protocols like VRRP, VF guests need the ability to set the unicast address of the interface. Extend the new ndo trust feature to let the hypervisor trust a guest to set/update its own unicast address. Signed-off-by: Chas Williams <3chas3@gmail.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-30ixgbe: Fix bugs in ixgbe_clear_vf_vlans()Alexander Duyck1-4/+4
When I had rewritten the code for ixgbe_clear_vf_vlans() it looks like I had transitioned back and forth between using word as an offset and using word as a register offset. As a result I honestly don't see how the code was working before other than the fact that resetting the VLANs on the VF like didn't do much to clear them. Another issue found is that the mask was using a divide instead of a modulus. As a result the mask bit was incorrectly being set to either bit 0 or 1 based on the value of the VF being tested. As a result the wrong VFs were having their VLANs cleared if they were enabled. I have updated the code so that word represents the offset in the array. This way we can use the modulus and xor operations and they will make sense instead of being performed on a 4 byte aligned value. I replaced the statement "(word % 2) ^ 1" with "~word % 2" in order to reduce the line length as the line exceeded 80 characters with the register name inserted. The two should be equivalent so the change should be safe. Reported-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12ixgbe: Clean stale VLANs when changing port VLAN or resettingAlexander Duyck1-5/+72
This patch guarantees that the VFs do not have access to VLANs that they were not supposed to. What this patch does is add code so that we delete the previous port VLAN after adding a new one, and if we reset the VF we clear all of the filters associated with it. Previously the code was leaving all previous VLANs mapped to the VF and they didn't get deleted unless the VF specifically requested it or if the PF itself was reset. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12ixgbe: Fix VLAN promisc in relation to SR-IOVAlexander Duyck1-72/+22
This patch is a follow-on for enabling VLAN promiscuous and allowing the PF to add VLANs without adding a VLVF entry. What this patch does is go through and free the VLVF registers if they are not needed as the VLAN belongs only to the PF which is the default pool. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12ixgbe: Add support for adding/removing VLAN on PF bypassing the VLVFAlexander Duyck1-1/+17
This patch adds support for bypassing the VLVF entry creation when the PF is adding a new VLAN. The advantage to doing this is that we can then save the VLVF entries for the VFs which must have them in order to function, versus the PF which can fall back on the default pool entry. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12ixgbe: Fix SR-IOV VLAN pool configurationAlexander Duyck1-2/+2
The code for checking the PF bit in ixgbe_set_vf_vlan_msg was using the wrong offset and as a result it was pulling the VLAN off of the PF even if there were VFs numbered greater than 40 that still had the VLAN enabled. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03ixgbe: Save VF info and take referencesMark Rustad1-2/+48
Save VF device pointers and take references to speed accesses used to monitor the device behavior to avoid slot resets. The saved information avoids lock contention during the search used to access each of the VFs. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Darin Miller <darin.j.miller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23ixgbe, ixgbevf: Add new mbox API xcast modeHiroshi Shimamoto1-0/+59
The limitation of the number of multicast address for VF is not enough for the large scale server with SR-IOV feature. IPv6 requires the multicast MAC address for each IP address to handle the Neighbor Solicitation message. We couldn't assign over 30 IPv6 addresses to a single VF. This patch introduces the new mailbox API, IXGBE_VF_UPDATE_XCAST_MODE, to update multicast mode of VF. This adds 3 modes; - NONE only L2 exact match addresses or Flow Director enabled - MULTI BAM and ROMPE set - ALLMULTI BAM, ROMPE and MPE set If a guest VF user wants over 30 MAC multicast addresses, set IFF_ALLMULTI to request PF to update xcast mode to enable VF multicast promiscuous mode. On the other hand, enabling VF multicast promiscuous mode may affect security and performance in the network of the NIC. Only trusted VF can enable multicast promiscuous mode. The behavior of untrusted VF is the same as previous version. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23ixgbe: Add new ndo to trust VFHiroshi Shimamoto1-0/+37
Implements the new netdev op to trust VF in ixgbe. The administrator can turn on and off VF trusted by ip command which supports trust message. # ip link set dev eth0 vf 1 trust on or # ip link set dev eth0 vf 1 trust off Send a ping to reset VF on changing the status of trusting. VF driver will reconfigure its features on reset. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-11ixgbe: Add GET_RSS_KEY command to VF-PF channel commands setVlad Zolotarov1-0/+21
For 82599 and x540 VFs and PF share the same RSS Key. Therefore we will return the same RSS key for all VFs. Support for other devices will be added later. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-11ixgbe: Add a RETA query command to VF-PF channel APIVlad Zolotarov1-0/+35
Add this new command for 82599 and x540 devices only. Support for other devices will be added later. 82599 and x540 VFs and PF share the same RSS redirection table (RETA). Therefore we just return it for all VFs. For 82599 and x540 RETA table is an array of 32 registers (128 bytes) and the maximum number of registers that may be delivered in a single VF-PF channel command is 15. On the other hand VFs of these devices can be configured to have up to 4 RSS queues. Therefore we will "compress" the RETA by transferring only 2 bits per entry and thereby it will take only 8 registers (DWORDS) to transfer the whole VF RETA. Thus this patch does the following: - Adds a new API version (to specify a new commands set). - Adds the IXGBE_VF_GET_RETA command to the VF-PF commands set. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-11ixgbe: Add a new netdev op to allow/prevent a VF from querying an RSS infoVlad Zolotarov1-2/+32
Implements the new netdev op to allow user to enable/disable the ability of a specific VF to query its RSS Indirection Table and an RSS Hash Key. This patch limits the new feature support to 82599 and x540 devices only. Support for other devices will be added later. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-10ixgbe: Move bridge mode from flag to variableDon Skidmore1-1/+2
We are currently storing our BRIDGE_MODE as a bit in our adapter flags. This patch will store the actual mode instead which minimizes obfuscation and makes following patches for X550 simpler. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-09ethernet: codespell comment spelling fixesJoe Perches1-1/+1
To test a checkpatch spelling patch, I ran codespell against drivers/net/ethernet/. $ git ls-files drivers/net/ethernet/ | \ while read file ; do \ codespell -w $file; \ done I removed a false positive in e1000_hw.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06ixgbe: fix setting port VLANEmil Tantilov1-5/+8
This patch fixes couple of issues introduced by commit 2b509c0cd292 ("ixgbe: cleanup ixgbe_ndo_set_vf_vlan") - fix setting of the VLAN inside ixgbe_enable_port_vlan() - disable the "hide VLAN" bit in PFQDE when port VLAN is disabled Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbe: allow multiple queues in SRIOV modeEmil Tantilov1-3/+0
ixgbe_set_sriov_queues() has the logic to allow multiple queues, this patch just removes the limitation. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-05ixgbe: add support for X550 extended RSS supportDon Skidmore1-1/+2
The new X550 family of MAC's will have a larger RSS hash (16 -> 64). It will also support individual VF to have their own independent RSS hash key. This patch will enable this functionality Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-11ixgbe: Add new support for X550 MAC'sDon Skidmore1-0/+6
This patch will add in the new MAC defines and fit it into the switch cases throughout the driver. New functionality and enablement support will be added in following patches. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-11ixgbe: cleanup move setting PFQDE.HIDE_VLAN to support function.Don Skidmore1-9/+22
Move setting of drop enable to support function. This not only makes the code more readable but is also prep for following patches that add additional MAC support. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-11ixgbe: cleanup ixgbe_ndo_set_vf_vlanDon Skidmore1-33/+61
Clean up functionality in ixgbe_ndo_set_vf_vlan that will simplify later patches. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-16ixgbe: check for vfs outside of sriov_num_vfs before dereferenceEmil Tantilov1-0/+3
The check for vfinfo is not sufficient because it does not protect against specifying vf that is outside of sriov_num_vfs range. All of the ndo functions have a check for it except for ixgbevf_ndo_set_spoofcheck(). The following patch is all we need to protect against this panic: ip link set p96p1 vf 0 spoofchk off BUG: unable to handle kernel NULL pointer dereference at 0000000000000052 IP: [<ffffffffa044a1c1>] ixgbe_ndo_set_vf_spoofchk+0x51/0x150 [ixgbe] Reported-by: Thierry Herbelot <thierry.herbelot@6wind.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: Thierry Herbelot <thierry.herbelot@6wind.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-04ixgbe: limit combined total of macvlan and SR-IOV VFsJacob Keller1-6/+8
Hardware has a limited number of pools available (64). Previously, no checks were in place to limit the number of accelerated macvlan devices based on the number of pools. Normally this would be ok, because there was already a limit for these well below the number of available pools. However, SR-IOV uses the very same pools. Therefor, we need to ensure that the total number of pools (number of VFs plus the number of non-VF pools in use for accelerated macvlans) does not exceed the number of pools available in hardware. This patch resolves a kernel NULL pointer dereference caused by the following commands: $modprobe ixgbe max_vfs=63 $ethtool -K eth2 l2-fwd-offload on $ip link add link eth2 macvlan0 type macvlan $ip link set dev macvlan0 up [ 992.950080] BUG: unable to handle kernel NULL pointer dereference at 0000000000000056 [ 992.951109] IP: [<ffffffffa003b71e>] ixgbe_disable_fwd_ring+0x1e/0xf0 [ixgbe] [ 992.951684] PGD 22a80e067 PUD 232e9b067 PMD 0 [ 992.952389] Oops: 0000 [#1] SMP [ 992.953014] Modules linked in: nfsd lockd nfs_acl exportfs auth_rpcgss oid_registry sunrpc bridge stp llc vhost_net macvtap macvlan vhost tun kvm_intel kvm ioatdma ixgbe mdio igb dca [ 992.956042] CPU: 2 PID: 11928 Comm: ifconfig Not tainted 3.16.0-rc6-net-next-07-29-2014-FCoE+ #1 [ 992.956915] Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.03.0003.041920141333 04/19/2014 [ 992.957791] task: ffff8804341c0000 ti: ffff8801d7dc8000 task.ti: ffff8801d7dc8000 [ 992.958660] RIP: 0010:[<ffffffffa003b71e>] [<ffffffffa003b71e>] ixgbe_disable_fwd_ring+0x1e/0xf0 [ixgbe] [ 992.959613] RSP: 0018:ffff8801d7dcbbb8 EFLAGS: 00010286 [ 992.960093] RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000001 [ 992.960575] RDX: ffff880232eb7000 RSI: 0000000000000000 RDI: ffff88022dc05800 [ 992.961059] RBP: ffff8801d7dcbbd8 R08: 0000000000000000 R09: 0000000000000000 [ 992.961541] R10: 0000000000000001 R11: 0000000000000000 R12: ffff88022ec20980 [ 992.962023] R13: ffff880232eb7000 R14: 0000000000000001 R15: 0000000000000001 [ 992.962508] FS: 00007fab264887a0(0000) GS:ffff880237640000(0000) knlGS:0000000000000000 [ 992.963378] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 992.963858] CR2: 0000000000000056 CR3: 000000022a939000 CR4: 00000000001427e0 [ 992.964340] Stack: [ 992.964806] ffff88022ec28840 ffff88022ec20980 ffff88022dc05800 ffff880232eb7000 [ 992.965976] ffff8801d7dcbc28 ffffffffa003bae8 ffff8801d7dcbbe8 0000000000000400 [ 992.967147] 000000000000000d ffff88022ec20980 ffff88022ec20000 ffff88022dc05800 [ 992.968319] Call Trace: [ 992.968795] [<ffffffffa003bae8>] ixgbe_fwd_ring_up+0x88/0x280 [ixgbe] [ 992.969284] [<ffffffffa0041d83>] ixgbe_fwd_add+0x173/0x220 [ixgbe] [ 992.969767] [<ffffffffa015056c>] macvlan_open+0x1bc/0x230 [macvlan] [ 992.970256] [<ffffffff816b8de7>] __dev_open+0xd7/0x150 [ 992.970735] [<ffffffff816b8bd7>] __dev_change_flags+0xa7/0x170 [ 992.971220] [<ffffffff816b8ccb>] dev_change_flags+0x2b/0x70 [ 992.971703] [<ffffffff817471b2>] devinet_ioctl+0x602/0x6d0 [ 992.972184] [<ffffffff81748168>] inet_ioctl+0x78/0x90 [ 992.972666] [<ffffffff816a143b>] sock_do_ioctl+0x2b/0x70 [ 992.973146] [<ffffffff816a14ed>] sock_ioctl+0x6d/0x260 [ 992.973627] [<ffffffff811ad3b4>] do_vfs_ioctl+0x84/0x540 [ 992.974109] [<ffffffff811a4c81>] ? final_putname+0x21/0x50 [ 992.974593] [<ffffffff818725d5>] ? sysret_check+0x22/0x5d [ 992.975073] [<ffffffff811ad901>] SyS_ioctl+0x91/0xa0 [ 992.975550] [<ffffffff818725a9>] system_call_fastpath+0x16/0x1b [ 992.976026] Code: ff 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 ec 20 48 89 5d e8 4c 89 65 f0 48 89 f3 4c 89 6d f8 4c 8b a7 08 02 00 00 <44> 0f b6 6e 56 44 03 af 14 02 00 00 4c 89 e7 e8 5e f2 ff ff be [ 992.982261] RIP [<ffffffffa003b71e>] ixgbe_disable_fwd_ring+0x1e/0xf0 [ixgbe] [ 992.983212] RSP <ffff8801d7dcbbb8> [ 992.983681] CR2: 0000000000000056 [ 992.984248] ---[ end trace 9f54802b5cc3638b ]--- Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-26ixgbe: Make return values more directMark Rustad1-19/+12
Make return values more direct, eliminating some gotos and otherwise unneeded conditionals. This also eliminates some local variables. Also a few minor cleanups in affected code so checkpatch won't complain. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-24Merge branch 'master' of ↵David S. Miller1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to igb, igbvf, ixgbe, i40e and i40evf. Jacob provides eight patches to cleanup the ixgbe driver to resolve various checkpatch.pl warnings/errors as well as minor coding style issues. Stephen Hemminger and I provide simple cleanups of void functions which had useless return statements at the end of the function which are not needed. v2: Dropped Emil's patch "ixgbe: fix the detection of SFP+ capable interfaces" while I wait for his updated patch to be validated. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-23net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate ↵Sucheta Chakraborty1-4/+9
through ip tool. o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed to have a bandwidth of at least this value. max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth of up to this value. o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced which takes 4 arguments: netdev, VF number, min_tx_rate, max_tx_rate o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler. o Drivers that currently implement ndo_set_vf_tx_rate should now call ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet implemented by driver. o If user enters only one of either min_tx_rate or max_tx_rate, then, userland should read back the other value from driver and set both for IFLA_VF_RATE. Drivers that have not yet implemented IFLA_VF_RATE should always return min_tx_rate as 0 when read from ip tool. o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then IFLA_VF_RATE should override. o Idea is to have consistent display of rate values to user. o Usage example: - ./ip link set p4p1 vf 0 rate 900 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-23ixgbe: clean up checkpatch warnings about CODE_INDENT and LEADING_SPACEJacob Keller1-2/+2
The contents of this patch were originally generated by "scripts/checkpatch.pl --fix-inplace --types CODE_INDENT,LEADING_SPACE drivers/net/ethernet/ixgbe/*.[ch]", and then hand verified for consistency. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-23ixgbe: improve mac filter handlingJacob Keller1-27/+7
Add mac_table API based on work done for igb, which includes functions to add and delete mac filters. This simplifies code for various entities that use MAC filters such as VMDQ, SR-IOV, MACVLAN, and such. Reported-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-23ixgbe: change handling of multicast filtersJacob Keller1-2/+13
In line with changes done by Alex Duyck regarding unicast filters, we now only set multicast filters when the interface is not in promiscuous mode for multicast packets. This also has an impact on the RAR usage such that SR-IOV has some RARs reserved for its own usage. Reported-by: Alex Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-18 02:17:23 +0300