summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/marvell/mvneta.c
AgeCommit message (Collapse)AuthorFilesLines
2019-03-23net: marvell: mvneta: fix DMA debug warningRussell King1-1/+1
[ Upstream commit a8fef9ba58c9966ddb1fec916d8d8137c9d8bc89 ] Booting 4.20 on SolidRun Clearfog issues this warning with DMA API debug enabled: WARNING: CPU: 0 PID: 555 at kernel/dma/debug.c:1230 check_sync+0x514/0x5bc mvneta f1070000.ethernet: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000002dd7dc00] [size=240 bytes] Modules linked in: ahci mv88e6xxx dsa_core xhci_plat_hcd xhci_hcd devlink armada_thermal marvell_cesa des_generic ehci_orion phy_armada38x_comphy mcp3021 spi_orion evbug sfp mdio_i2c ip_tables x_tables CPU: 0 PID: 555 Comm: bridge-network- Not tainted 4.20.0+ #291 Hardware name: Marvell Armada 380/385 (Device Tree) [<c0019638>] (unwind_backtrace) from [<c0014888>] (show_stack+0x10/0x14) [<c0014888>] (show_stack) from [<c07f54e0>] (dump_stack+0x9c/0xd4) [<c07f54e0>] (dump_stack) from [<c00312bc>] (__warn+0xf8/0x124) [<c00312bc>] (__warn) from [<c00313b0>] (warn_slowpath_fmt+0x38/0x48) [<c00313b0>] (warn_slowpath_fmt) from [<c00b0370>] (check_sync+0x514/0x5bc) [<c00b0370>] (check_sync) from [<c00b04f8>] (debug_dma_sync_single_range_for_cpu+0x6c/0x74) [<c00b04f8>] (debug_dma_sync_single_range_for_cpu) from [<c051bd14>] (mvneta_poll+0x298/0xf58) [<c051bd14>] (mvneta_poll) from [<c0656194>] (net_rx_action+0x128/0x424) [<c0656194>] (net_rx_action) from [<c000a230>] (__do_softirq+0xf0/0x540) [<c000a230>] (__do_softirq) from [<c00386e0>] (irq_exit+0x124/0x144) [<c00386e0>] (irq_exit) from [<c009b5e0>] (__handle_domain_irq+0x58/0xb0) [<c009b5e0>] (__handle_domain_irq) from [<c03a63c4>] (gic_handle_irq+0x48/0x98) [<c03a63c4>] (gic_handle_irq) from [<c0009a10>] (__irq_svc+0x70/0x98) ... This appears to be caused by mvneta_rx_hwbm() calling dma_sync_single_range_for_cpu() with the wrong struct device pointer, as the buffer manager device pointer is used to map and unmap the buffer. Fix this. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-09net: mvneta: fix operation for 64K PAGE_SIZEMarcin Wojtas1-3/+3
[ Upstream commit e735fd55b94bb48363737db3b1d57627c1a16b47 ] Recent changes in the mvneta driver reworked allocation and handling of the ingress buffers to use entire pages. Apart from that in SW BM scenario the HW must be informed via PRXDQS about the biggest possible incoming buffer that can be propagated by RX descriptors. The BufferSize field was filled according to the MTU-dependent pkt_size value. Later change to PAGE_SIZE broke RX operation when usin 64K pages, as the field is simply too small. This patch conditionally limits the value passed to the BufferSize of the PRXDQS register, depending on the PAGE_SIZE used. On the occasion remove now unused frag_size field of the mvneta_port structure. Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM") Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-24net: mvneta: fix the remaining Rx descriptor unmapping issuesAntoine Tenart1-5/+4
With CONFIG_DMA_API_DEBUG enabled we get DMA unmapping warning in various places of the mvneta driver, for example when putting down an interface while traffic is passing through. The issue is when using s/w buffer management, the Rx buffers are mapped using dma_map_page but unmapped with dma_unmap_single. This patch fixes this by using the right unmapping function. Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: mvneta: fix the Rx desc buffer DMA unmappingAntoine Tenart1-2/+2
With CONFIG_DMA_API_DEBUG enabled we now get a warning when using the mvneta driver: mvneta d0030000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001165b000] [size=4096 bytes] [mapped as page] [unmapped as single] This is because when using the s/w buffer management, the Rx descriptor buffer is mapped with dma_map_page but unmapped with dma_unmap_single. This patch fixes this by using the right unmapping function. Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11net: mvneta: fix mvneta_config_rss on armada 3700Jisheng Zhang1-11/+20
The mvneta Ethernet driver is used on a few different Marvell SoCs. Some SoCs have per cpu interrupts for Ethernet events, the driver uses a per CPU napi structure for this case. Some SoCs such as armada 3700 have a single interrupt for Ethernet events, the driver uses a global napi structure for this case. Current mvneta_config_rss() always operates the per cpu napi structure. Fix it by operating a global napi for "single interrupt" case, and per cpu napi structure for remaining cases. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29net: mvneta: Improve the buffer allocation method for SWBMYelena Krivosheev1-98/+183
With system having a small memory (around 256MB), the state "cannot allocate memory to refill with new buffer" is reach pretty quickly. By this patch we changed buffer allocation method to a better handling of this use case by avoiding memory allocation issues. Signed-off-by: Yelena Krivosheev <yelena@marvell.com> [gregory: extract from a larger patch] Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29net: mvneta: Verify hardware checksum only when offload checksum feature is setYelena Krivosheev1-1/+2
If the checksum offload feature is not set, then there is no point to check the status of the hardware. [gregory: extract from a larger patch] Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29net: mvneta: Allocate page for the descriptorGregory CLEMENT1-38/+24
Instead of trying to allocate the exact amount of memory for each descriptor use a page for each of them, it allows to simplify the allocation management and increase the performance of the driver. Based on the work of Yelena Krivosheev <yelena@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29net: mvneta: discriminate error cause for missed packetGregory CLEMENT1-6/+22
In order to improve the diagnostic in case of error, make the distinction between refill error and skb allocation error. Also make the information available through the ethtool state. Based on the work of Yelena Krivosheev <yelena@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29net: mvneta: increase number of buffers in RX and TX queueYelena Krivosheev1-2/+2
The initial values were too small leading to poor performance when using the software buffer management. Signed-off-by: Yelena Krivosheev <yelena@marvell.com> [gregory: extract from a larger patch] Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29net: mvneta: remove data pointer usage from device_node structureGregory CLEMENT1-6/+12
On year ago Rob Herring wanted to remove the data pointer from the device_node structure[1]. The mvneta driver seemed to be the only one which used (abused ?) it. However, the proposal of Rob to remove this pointer from the driver introduced a regression, and I tested and fixed an alternative way, but it was never submitted as a proper patch. Now here it is: Instead of using the device_node structure ->data pointer, we store the BM private data as the driver data of the BM platform_device. The core mvneta code can retrieve it by doing a lookup on which platform_device corresponds to the BM device tree node using of_find_device_by_node(), and get its driver data [1]https://www.spinics.net/lists/netdev/msg445197.html Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29net: mvneta: fix mtu change on port without linkYelena Krivosheev1-1/+0
It is incorrect to enable TX/RX queues (call by mvneta_port_up()) for port without link. Indeed MTU change for interface without link causes TX queues to stuck. Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> [gregory.clement: adding Fixes tags and rewording commit log] Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29net: ethernet: mvneta: Fix napi structure mixup on armada 3700Andrew Lunn1-10/+12
The mvneta Ethernet driver is used on a few different Marvell SoCs. Some SoCs have per cpu interrupts for Ethernet events. Some SoCs have a single interrupt, independent of the CPU. The driver handles this by having a per CPU napi structure when there are per CPU interrupts, and a global napi structure when there is a single interrupt. When the napi core calls mvneta_poll(), it passes the napi instance. This was not being propagated through the call chain, and instead the per-cpu napi instance was passed to napi_gro_receive() call. This breaks when there is a single global napi instance. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC") Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-23net: mvneta: fix the Rx desc DMA address in the Rx pathAntoine Tenart1-1/+1
When using s/w buffer management, buffers are allocated and DMA mapped. When doing so on an arm64 platform, an offset correction is applied on the DMA address, before storing it in an Rx descriptor. The issue is this DMA address is then used later in the Rx path without removing the offset correction. Thus the DMA address is wrong, which can led to various issues. This patch fixes this by removing the offset correction from the DMA address retrieved from the Rx descriptor before using it in the Rx path. Fixes: 8d5047cf9ca2 ("net: mvneta: Convert to be 64 bits compatible") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-02net: mvneta: improve suspend/resumeJisheng Zhang1-7/+62
Current suspend/resume implementation reuses the mvneta_open() and mvneta_close(), but it could be optimized to take only necessary actions during suspend/resume. One obvious problem of current implementation is: after hundreds of system suspend/resume cycles, the resume of mvneta could fail due to fragmented dma coherent memory. After this patch, the non-necessary memory alloc/free is optimized out. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-02net: mvneta: split rxq/txq init and txq deinit into SW and HW partsJisheng Zhang1-19/+66
This is to prepare the suspend/resume improvement in next patch. The SW parts can be optimized out during resume. As for rxq handling during suspend, we'd like to drop packets by calling mvneta_rxq_drop_pkts() which is both SW and HW operation, so we don't split rxq deinit. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30net: mvneta: fix enable of all initialized RXQsYelena Krivosheev1-0/+1
In mvneta_port_up() we enable relevant RX and TX port queues by write queues bit map to an appropriate register. q_map must be ZERO in the beginning of this process. Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30net: mvneta: remove duplicate *_coal assignmentJisheng Zhang1-4/+0
The style of the rx/tx queue's *_coal member assignment is: static void foo_coal_set(...) { set the coal in hw; update queue's foo_coal member; [1] } In other place, we call foo_coal_set(pp, queue->foo_coal), so the above [1] is duplicated and could be removed. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30sfp/phylink: move module EEPROM ethtool access into netdev core ethtoolRussell King1-18/+0
Provide a pointer to the SFP bus in struct net_device, so that the ethtool module EEPROM methods can access the SFP directly, rather than needing every user to provide a hook for it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30net: phy: phylink: Provide PHY interface to mac_link_{up, down}Florian Fainelli1-1/+3
In preparation for having DSA transition entirely to PHYLINK, we need to pass a PHY interface type to the mac_link_{up,down} callbacks because we may have to make decisions on that (e.g: turn on/off RGMII interfaces etc.). We do not pass an entire phylink_link_state because not all parameters (pause, duplex etc.) are defined when the link is down, only link and interface are. Update mvneta accordingly since it currently implements phylink_mac_ops. Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26ethernet: Use octal not symbolic permissionsJoe Perches1-4/+4
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03net: mvneta: add module EEPROM reading supportRussell King1-0/+18
Add support for reading the SFF module's EEPROM via the ethtool API. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03net: mvneta: disable MVNETA_CAUSE_PSC_SYNC_CHANGE interruptRussell King1-8/+4
The PSC sync change interrupt can fire multiple times while the link is down, which is caused by noise on the serdes lines. As this isn't information we make use of, it's pointless having the interrupt enabled. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03net: mvneta: add EEE supportRussell King1-5/+94
Add support for EEE to mvneta. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03net: mvneta: add flow control supportRussell King1-0/+32
Add support for flow control to mvneta. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03net: mvneta: add 1000BaseX supportRussell King1-9/+50
Add support for 1000BaseX link modes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03net: mvneta: move port configurationRussell King1-31/+20
Move the port configuration and release of reset to mvneta_mac_config() along side the rest of the port mode configuration. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03net: mvneta: convert to phylinkRussell King1-242/+175
Convert mvneta to use phylink, which models the MAC to PHY link in a generic, reusable form. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> - remove unused sync status Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03net: mvneta: prepare to convert to phylinkRussell King1-41/+60
Prepare to convert mvneta to phylink by splitting the adjust_link function into its consituent parts. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03net: mvneta: ensure PM paths take the rtnl lockRussell King1-0/+4
The netdev core always ensures that the rtnl lock is held while calling the ndo_open() and ndo_stop() methods. However, the suspend/resume paths do not hold the rtnl lock. phylink will expect the rtnl lock to be held when the MAC driver calls it, so we end up with kernel warnings. Take the lock to ensure that these functions are called in a consistent manner. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: mvneta: eliminate wrong call to handle rx descriptor errorYelena Krivosheev1-1/+1
There are few reasons in mvneta_rx_swbm() function when received packet is dropped. mvneta_rx_error() should be called only if error bit [16] is set in rx descriptor. [gregory.clement@free-electrons.com: add fixes tag] Cc: stable@vger.kernel.org Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Tested-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: mvneta: use proper rxq_number in loop on rx queuesYelena Krivosheev1-1/+1
When adding the RX queue association with each CPU, a typo was made in the mvneta_cleanup_rxqs() function. This patch fixes it. [gregory.clement@free-electrons.com: add commit log and fixes tag] Cc: stable@vger.kernel.org Fixes: 2dcf75e2793c ("net: mvneta: Associate RX queues with each CPU") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Tested-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: mvneta: clear interface link status on port disableYelena Krivosheev1-0/+4
When port connect to PHY in polling mode (with poll interval 1 sec), port and phy link status must be synchronize in order don't loss link change event. [gregory.clement@free-electrons.com: add fixes tag] Cc: <stable@vger.kernel.org> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Tested-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14net: mvneta: fix handling of the Tx descriptor counterSimon Guinot1-5/+8
The mvneta controller provides a 8-bit register to update the pending Tx descriptor counter. Then, a maximum of 255 Tx descriptors can be added at once. In the current code the mvneta_txq_pend_desc_add function assumes the caller takes care of this limit. But it is not the case. In some situations (xmit_more flag), more than 255 descriptors are added. When this happens, the Tx descriptor counter register is updated with a wrong value, which breaks the whole Tx queue management. This patch fixes the issue by allowing the mvneta_txq_pend_desc_add function to process more than 255 Tx descriptors. Fixes: 2a90f7e1d5d0 ("net: mvneta: add xmit_more support") Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01mvneta: Driver and hardware supports IPv6 offload, so enable itAndrew Pilloud1-1/+1
The mvneta driver and hardware supports IPv6 offload, however it isn't enabled. Set the NETIF_F_IPV6_CSUM feature to inform the network layer that this driver can offload IPV6 TCP and UDP checksums. This change has been tested on an Armada 370 and the feature support confirmed with several device datasheets including the Armada XP and Armada 3700. Signed-off-by: Andrew Pilloud <andrewpilloud@igneoussystems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24net: define the TSO header size in net/tso.hAntoine Ténart1-3/+0
The TSO header size was defined in many drivers. Factorize the code and define its size in net/tso.h. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg1-6/+4
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvneta: Adjust six checks for null pointersMarkus Elfring1-6/+6
MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written … Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvneta: Use kmalloc_array() in mvneta_txq_init()Markus Elfring1-1/+2
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvneta: Improve two size determinations in mvneta_init()Markus Elfring1-4/+2
Replace the specification of two data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvneta: Use devm_kmalloc_array() in mvneta_init()Markus Elfring1-3/+5
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: mvneta: fix failed to suspend if WOL is enabledJisheng Zhang1-1/+11
Recently, suspend/resume and WOL support are added into mvneta driver. If we enable WOL, then we get some error as below on Marvell BG4CT platforms during suspend: [ 184.149723] dpm_run_callback(): mdio_bus_suspend+0x0/0x50 returns -16 [ 184.149727] PM: Device f7b62004.mdio-mi:00 failed to suspend: error -16 -16 means -EBUSY, phy_suspend() will return -EBUSY if it finds the device has WOL enabled. We fix this issue by properly setting the netdev's power.can_wakeup and power.wakeup, i.e 1. in mvneta_mdio_probe(), call device_set_wakeup_capable() to set power.can_wakeup if the phy support WOL. 2. in mvneta_ethtool_set_wol(), call device_set_wakeup_enable() to set power.wakeup if WOL has been successfully enabled in phy. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-30net: mvneta: set rx mode during resume if interface is runningJisheng Zhang1-1/+4
I found a bug by: 0. boot and start dhcp client 1. echo mem > /sys/power/state 2. resume back immediately 3. don't touch dhcp client to renew the lease 4. ping the gateway. No acks Usually, after step2, the DHCP lease isn't expired, so in theory we should resume all back. But in fact, it doesn't. It turns out the rx mode isn't resumed correctly. This patch fixes it by adding mvneta_set_rx_mode(dev) in the resume hook if interface is running. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-30net: mvneta: add RGMII_RXID and RGMII_TXID supportJisheng Zhang1-0/+2
RGMII_RXID and RGMII_TX_ID share the same GMAC CTRL setting as RGMII or RGMII_ID. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-16net: mvneta: support suspend and resumeJane Li1-4/+57
Add basic support for handling suspend and resume. Signed-off-by: Jane Li <jiel@marvell.com> Reviewed-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net: mvneta: make mvneta_eth_tool_ops staticJisheng Zhang1-1/+1
The mvneta_eth_tool_ops is only used internally in mvneta driver, so make it static. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10net: mvneta: fix build errors when linux/phy*.h is removed from net/dsa.hRussell King1-0/+1
drivers/net/ethernet/marvell/mvneta.c:2694:26: error: storage size of 'status' isn't known drivers/net/ethernet/marvell/mvneta.c:2695:26: error: storage size of 'changed' isn't known drivers/net/ethernet/marvell/mvneta.c:2695:9: error: variable 'changed' has initializer but incomplete type drivers/net/ethernet/marvell/mvneta.c:2709:2: error: implicit declaration of function 'fixed_phy_update_state' [-Werror=implicit-function-declaration] Add linux/phy_fixed.h to mvneta.c Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net: mvneta: implement .set_wol and .get_wolJingju Hou1-0/+21
The mvneta itself does not support WOL, but the PHY might. So pass the calls to the PHY Signed-off-by: Jingju Hou <houjingj@marvell.com> Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet1-4/+2
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-16 23:08:27 +0300