summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/marvell/octeon_ep
AgeCommit message (Collapse)AuthorFilesLines
2024-05-19Merge tag 'mm-stable-2024-05-17-19-19' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull mm updates from Andrew Morton: "The usual shower of singleton fixes and minor series all over MM, documented (hopefully adequately) in the respective changelogs. Notable series include: - Lucas Stach has provided some page-mapping cleanup/consolidation/ maintainability work in the series "mm/treewide: Remove pXd_huge() API". - In the series "Allow migrate on protnone reference with MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one test. - In their series "Memory allocation profiling" Kent Overstreet and Suren Baghdasaryan have contributed a means of determining (via /proc/allocinfo) whereabouts in the kernel memory is being allocated: number of calls and amount of memory. - Matthew Wilcox has provided the series "Various significant MM patches" which does a number of rather unrelated things, but in largely similar code sites. - In his series "mm: page_alloc: freelist migratetype hygiene" Johannes Weiner has fixed the page allocator's handling of migratetype requests, with resulting improvements in compaction efficiency. - In the series "make the hugetlb migration strategy consistent" Baolin Wang has fixed a hugetlb migration issue, which should improve hugetlb allocation reliability. - Liu Shixin has hit an I/O meltdown caused by readahead in a memory-tight memcg. Addressed in the series "Fix I/O high when memory almost met memcg limit". - In the series "mm/filemap: optimize folio adding and splitting" Kairui Song has optimized pagecache insertion, yielding ~10% performance improvement in one test. - Baoquan He has cleaned up and consolidated the early zone initialization code in the series "mm/mm_init.c: refactor free_area_init_core()". - Baoquan has also redone some MM initializatio code in the series "mm/init: minor clean up and improvement". - MM helper cleanups from Christoph Hellwig in his series "remove follow_pfn". - More cleanups from Matthew Wilcox in the series "Various page->flags cleanups". - Vlastimil Babka has contributed maintainability improvements in the series "memcg_kmem hooks refactoring". - More folio conversions and cleanups in Matthew Wilcox's series: "Convert huge_zero_page to huge_zero_folio" "khugepaged folio conversions" "Remove page_idle and page_young wrappers" "Use folio APIs in procfs" "Clean up __folio_put()" "Some cleanups for memory-failure" "Remove page_mapping()" "More folio compat code removal" - David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb functions to work on folis". - Code consolidation and cleanup work related to GUP's handling of hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2". - Rick Edgecombe has developed some fixes to stack guard gaps in the series "Cover a guard gap corner case". - Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series "mm/ksm: fix ksm exec support for prctl". - Baolin Wang has implemented NUMA balancing for multi-size THPs. This is a simple first-cut implementation for now. The series is "support multi-size THP numa balancing". - Cleanups to vma handling helper functions from Matthew Wilcox in the series "Unify vma_address and vma_pgoff_address". - Some selftests maintenance work from Dev Jain in the series "selftests/mm: mremap_test: Optimizations and style fixes". - Improvements to the swapping of multi-size THPs from Ryan Roberts in the series "Swap-out mTHP without splitting". - Kefeng Wang has significantly optimized the handling of arm64's permission page faults in the series "arch/mm/fault: accelerate pagefault when badaccess" "mm: remove arch's private VM_FAULT_BADMAP/BADACCESS" - GUP cleanups from David Hildenbrand in "mm/gup: consistently call it GUP-fast". - hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to use struct vm_fault". - selftests build fixes from John Hubbard in the series "Fix selftests/mm build without requiring "make headers"". - Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes the initialization code so that migration between different memory types works as intended. - David Hildenbrand has improved follow_pte() and fixed an errant driver in the series "mm: follow_pte() improvements and acrn follow_pte() fixes". - David also did some cleanup work on large folio mapcounts in his series "mm: mapcount for large folios + page_mapcount() cleanups". - Folio conversions in KSM in Alex Shi's series "transfer page to folio in KSM". - Barry Song has added some sysfs stats for monitoring multi-size THP's in the series "mm: add per-order mTHP alloc and swpout counters". - Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled and limit checking cleanups". - Matthew Wilcox has been looking at buffer_head code and found the documentation to be lacking. The series is "Improve buffer head documentation". - Multi-size THPs get more work, this time from Lance Yang. His series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes the freeing of these things. - Kemeng Shi has added more userspace-visible writeback instrumentation in the series "Improve visibility of writeback". - Kemeng Shi then sent some maintenance work on top in the series "Fix and cleanups to page-writeback". - Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the series "Improve anon_vma scalability for anon VMAs". Intel's test bot reported an improbable 3x improvement in one test. - SeongJae Park adds some DAMON feature work in the series "mm/damon: add a DAMOS filter type for page granularity access recheck" "selftests/damon: add DAMOS quota goal test" - Also some maintenance work in the series "mm/damon/paddr: simplify page level access re-check for pageout" "mm/damon: misc fixes and improvements" - David Hildenbrand has disabled some known-to-fail selftests ni the series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL". - memcg metadata storage optimizations from Shakeel Butt in "memcg: reduce memory consumption by memcg stats". - DAX fixes and maintenance work from Vishal Verma in the series "dax/bus.c: Fixups for dax-bus locking"" * tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits) memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault selftests: cgroup: add tests to verify the zswap writeback path mm: memcg: make alloc_mem_cgroup_per_node_info() return bool mm/damon/core: fix return value from damos_wmark_metric_value mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED selftests: cgroup: remove redundant enabling of memory controller Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT Docs/mm/damon/design: use a list for supported filters Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file selftests/damon: classify tests for functionalities and regressions selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None' selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts selftests/damon/_damon_sysfs: check errors from nr_schemes file reads mm/damon/core: initialize ->esz_bp from damos_quota_init_priv() selftests/damon: add a test for DAMOS quota goal ...
2024-05-08net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet1-1/+1
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-26fix missing vmalloc.h includesKent Overstreet1-0/+1
Patch series "Memory allocation profiling", v6. Overview: Low overhead [1] per-callsite memory allocation profiling. Not just for debug kernels, overhead low enough to be deployed in production. Example output: root@moria-kvm:~# sort -rn /proc/allocinfo 127664128 31168 mm/page_ext.c:270 func:alloc_page_ext 56373248 4737 mm/slub.c:2259 func:alloc_slab_page 14880768 3633 mm/readahead.c:247 func:page_cache_ra_unbounded 14417920 3520 mm/mm_init.c:2530 func:alloc_large_system_hash 13377536 234 block/blk-mq.c:3421 func:blk_mq_alloc_rqs 11718656 2861 mm/filemap.c:1919 func:__filemap_get_folio 9192960 2800 kernel/fork.c:307 func:alloc_thread_stack_node 4206592 4 net/netfilter/nf_conntrack_core.c:2567 func:nf_ct_alloc_hashtable 4136960 1010 drivers/staging/ctagmod/ctagmod.c:20 [ctagmod] func:ctagmod_start 3940352 962 mm/memory.c:4214 func:alloc_anon_folio 2894464 22613 fs/kernfs/dir.c:615 func:__kernfs_new_node ... Usage: kconfig options: - CONFIG_MEM_ALLOC_PROFILING - CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT - CONFIG_MEM_ALLOC_PROFILING_DEBUG adds warnings for allocations that weren't accounted because of a missing annotation sysctl: /proc/sys/vm/mem_profiling Runtime info: /proc/allocinfo Notes: [1]: Overhead To measure the overhead we are comparing the following configurations: (1) Baseline with CONFIG_MEMCG_KMEM=n (2) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) (3) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) (4) Enabled at runtime (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n && /proc/sys/vm/mem_profiling=1) (5) Baseline with CONFIG_MEMCG_KMEM=y && allocating with __GFP_ACCOUNT (6) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) && CONFIG_MEMCG_KMEM=y (7) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y && CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) && CONFIG_MEMCG_KMEM=y Performance overhead: To evaluate performance we implemented an in-kernel test executing multiple get_free_page/free_page and kmalloc/kfree calls with allocation sizes growing from 8 to 240 bytes with CPU frequency set to max and CPU affinity set to a specific CPU to minimize the noise. Below are results from running the test on Ubuntu 22.04.2 LTS with 6.8.0-rc1 kernel on 56 core Intel Xeon: kmalloc pgalloc (1 baseline) 6.764s 16.902s (2 default disabled) 6.793s (+0.43%) 17.007s (+0.62%) (3 default enabled) 7.197s (+6.40%) 23.666s (+40.02%) (4 runtime enabled) 7.405s (+9.48%) 23.901s (+41.41%) (5 memcg) 13.388s (+97.94%) 48.460s (+186.71%) (6 def disabled+memcg) 13.332s (+97.10%) 48.105s (+184.61%) (7 def enabled+memcg) 13.446s (+98.78%) 54.963s (+225.18%) Memory overhead: Kernel size: text data bss dec diff (1) 26515311 18890222 17018880 62424413 (2) 26524728 19423818 16740352 62688898 264485 (3) 26524724 19423818 16740352 62688894 264481 (4) 26524728 19423818 16740352 62688898 264485 (5) 26541782 18964374 16957440 62463596 39183 Memory consumption on a 56 core Intel CPU with 125GB of memory: Code tags: 192 kB PageExts: 262144 kB (256MB) SlabExts: 9876 kB (9.6MB) PcpuExts: 512 kB (0.5MB) Total overhead is 0.2% of total memory. Benchmarks: Hackbench tests run 100 times: hackbench -s 512 -l 200 -g 15 -f 25 -P baseline disabled profiling enabled profiling avg 0.3543 0.3559 (+0.0016) 0.3566 (+0.0023) stdev 0.0137 0.0188 0.0077 hackbench -l 10000 baseline disabled profiling enabled profiling avg 6.4218 6.4306 (+0.0088) 6.5077 (+0.0859) stdev 0.0933 0.0286 0.0489 stress-ng tests: stress-ng --class memory --seq 4 -t 60 stress-ng --class cpu --seq 4 -t 60 Results posted at: https://evilpiepirate.org/~kent/memalloc_prof_v4_stress-ng/ [2] https://lore.kernel.org/all/20240306182440.2003814-1-surenb@google.com/ This patch (of 37): The next patch drops vmalloc.h from a system header in order to fix a circular dependency; this adds it to all the files that were pulling it in implicitly. [kent.overstreet@linux.dev: fix arch/alpha/lib/memcpy.c] Link: https://lkml.kernel.org/r/20240327002152.3339937-1-kent.overstreet@linux.dev [surenb@google.com: fix arch/x86/mm/numa_32.c] Link: https://lkml.kernel.org/r/20240402180933.1663992-1-surenb@google.com [kent.overstreet@linux.dev: a few places were depending on sizes.h] Link: https://lkml.kernel.org/r/20240404034744.1664840-1-kent.overstreet@linux.dev [arnd@arndb.de: fix mm/kasan/hw_tags.c] Link: https://lkml.kernel.org/r/20240404124435.3121534-1-arnd@kernel.org [surenb@google.com: fix arc build] Link: https://lkml.kernel.org/r/20240405225115.431056-1-surenb@google.com Link: https://lkml.kernel.org/r/20240321163705.3067592-1-surenb@google.com Link: https://lkml.kernel.org/r/20240321163705.3067592-2-surenb@google.com Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Tested-by: Kees Cook <keescook@chromium.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andreas Hindborg <a.hindborg@samsung.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Gary Guo <gary@garyguo.net> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-19octeon_ep: support firmware notifications for VFsShinas Rasheed3-0/+66
Notifications from firmware to vf has to pass through PF control mbox and via PF-VF mailboxes. The notifications have to be parsed out from the control mbox and passed to the PF-VF mailbox in order to reach the corresponding VF. Version compatibility should also be checked before messages are passed to the mailboxes. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19octeon_ep: control net framework to support VF offloadsShinas Rasheed2-1/+67
Inquire firmware on supported offloads, as well as convey offloads enabled dynamically to firmware for the VFs. Implement control net API to support the same. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19octeon_ep: PF-VF mailbox version supportShinas Rasheed3-3/+17
Add PF-VF mailbox initial version support Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19octeon_ep: add PF-VF mailbox communicationShinas Rasheed11-49/+713
Implement mailbox communication between PF and VFs. PF-VF mailbox is used for all control commands from VF to PF and asynchronous notification messages from PF to VF. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-10/+15
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/intel/iavf/iavf_ethtool.c 3a0b5a2929fd ("iavf: Introduce new state machines for flow director") 95260816b489 ("iavf: use iavf_schedule_aq_request() helper") https://lore.kernel.org/all/84e12519-04dc-bd80-bc34-8cf50d7898ce@intel.com/ drivers/net/ethernet/broadcom/bnxt/bnxt.c c13e268c0768 ("bnxt_en: Fix HWTSTAMP_FILTER_ALL packet timestamp logic") c2f8063309da ("bnxt_en: Refactor RX VLAN acceleration logic.") a7445d69809f ("bnxt_en: Add support for new RX and TPA_START completion types for P7") 1c7fd6ee2fe4 ("bnxt_en: Rename some macros for the P5 chips") https://lore.kernel.org/all/20231211110022.27926ad9@canb.auug.org.au/ drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c bd6781c18cb5 ("bnxt_en: Fix wrong return value check in bnxt_close_nic()") 84793a499578 ("bnxt_en: Skip nic close/open when configuring tstamp filters") https://lore.kernel.org/all/20231214113041.3a0c003c@canb.auug.org.au/ drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c 3d7a3f2612d7 ("net/mlx5: Nack sync reset request when HotPlug is enabled") cecf44ea1a1f ("net/mlx5: Allow sync reset flow when BF MGT interface device is present") https://lore.kernel.org/all/20231211110328.76c925af@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-11octeon_ep: explicitly test for firmware ready valueShinas Rasheed1-1/+2
The firmware ready value is 1, and get firmware ready status function should explicitly test for that value. The firmware ready value read will be 2 after driver load, and on unbind till firmware rewrites the firmware ready back to 0, the value seen by driver will be 2, which should be regarded as not ready. Fixes: 10c073e40469 ("octeon_ep: defer probe if firmware not ready") Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-09octeon_ep: initialise control mbox tasks before using APIsShinas Rasheed1-9/+13
Initialise various workqueue tasks and queue interrupt poll task before the first invocation of any control net APIs. Since octep_ctrl_net_get_info was called before the control net receive work task was initialised or even the interrupt poll task was queued, the function call wasn't returning actual firmware info queried from Octeon. Fixes: 8d6198a14e2b ("octeon_ep: support to fetch firmware info") Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Link: https://lore.kernel.org/r/20231206135228.2591659-1-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-06octeon_ep: control net API framework to support offloadsShinas Rasheed9-51/+231
Inquire firmware on supported offloads, as well as convey offloads enabled dynamically to firmware. New control net API functionality is required for the above. Implement control net API framework for offloads. Additionally, fetch/insert offload metadata from hardware RX/TX buffer respectively during receive/transmit. Currently supported offloads include checksum and TSO. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://lore.kernel.org/r/20231204154940.2583140-1-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-01octeon_ep: set backpressure watermark for RX queuesShinas Rasheed3-0/+20
Set backpressure watermark for hardware RX queues. Backpressure gets triggered when the available buffers of a hardware RX queue falls below the set watermark. This backpressure will propagate to packet processing pipeline in the OCTEON card, so that the host receives fewer packets and prevents packet dropping at host. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-01octeon_ep: Fix error code in probe()Dan Carpenter1-0/+1
Set the error code if octep_ctrl_net_get_mtu() fails. Currently the code returns success. Fixes: 0a5f8534e398 ("octeon_ep: get max rx packet length from firmware") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Sathesh B Edara <sedara@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-01octeon_ep: support OCTEON CN98 devicesShinas Rasheed4-4/+29
Add PCI Endpoint NIC support for Octeon CN98 devices. CN98 devices are part of Octeon 9 family products with similar PCI NIC characteristics to CN93, already supported driver. Add CN98 card to the device id table, as well as support differences in the register fields and certain usage scenarios such as unload. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://lore.kernel.org/r/20231129045348.2538843-3-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-01octeon_ep: implement device unload control net APIShinas Rasheed2-1/+26
Device unload control net function should inform firmware of driver unload to let it take necessary actions to cleanup. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://lore.kernel.org/r/20231129045348.2538843-2-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-24octeon_ep: get max rx packet length from firmwareShinas Rasheed4-3/+37
Max receive packet length can vary across SoCs, so this needs to be queried from respective firmware and filled by driver. A control net get mtu api should be implemented to do the same. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24octeon_ep: Solve style issues in control net filesShinas Rasheed2-63/+76
Solve observed style issues for kernel documentation and structure declarations in control net API definitions. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-21octeon_ep: support Octeon CN10K devicesShinas Rasheed5-1/+1314
Add PCI Endpoint NIC support for Octeon CN10K devices. CN10K devices are part of Octeon 10 family products with similar PCI NIC characteristics. These include: - CN10KA - CNF10KA - CNF10KB - CN10KB Update supported device list in Documentation Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://lore.kernel.org/r/20231117103817.2468176-1-srasheed@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-17octeon_ep: remove atomic variable usage in Tx data pathShinas Rasheed5-13/+14
Replace atomic variable "instr_pending" which represents number of posted tx instructions pending completion, with host_write_idx and flush_index variables in the xmit and completion processing respectively. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-17octeon_ep: implement xmit_more in transmitShinas Rasheed2-10/+28
Add xmit_more handling in tx datapath for octeon_ep pf. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-17octeon_ep: remove dma sync in trasmit pathShinas Rasheed1-7/+0
Cleanup dma sync calls for scatter gather mappings, since they are coherent allocations and do not need explicit sync to be called. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-17octeon_ep: add padding for small packetsShinas Rasheed1-0/+3
Pad small packets to ETH_ZLEN before transmit, as hardware cannot pad and requires software padding to ensure minimum ethernet frame length. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-21octeon_ep: assert hardware structure sizesShinas Rasheed2-0/+7
Clean up structure defines related to hardware data to be asserted to fixed sizes, as padding is not allowed by hardware. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-7/+6
Cross-merge networking fixes after downstream PR. net/mac80211/key.c 02e0e426a2fb ("wifi: mac80211: fix error path key leak") 2a8b665e6bcc ("wifi: mac80211: remove key_mtx") 7d6904bf26b9 ("Merge wireless into wireless-next") https://lore.kernel.org/all/20231012113648.46eea5ec@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/ti/Kconfig a602ee3176a8 ("net: ethernet: ti: Fix mixed module-builtin object") 98bdeae9502b ("net: cpmac: remove driver to prepare for platform removal") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-19octeon_ep: update BQL sent bytes before ringing doorbellShinas Rasheed1-7/+6
Sometimes Tx is completed immediately after doorbell is updated, which causes Tx completion routing to update completion bytes before the same packet bytes are updated in sent bytes in transmit function, hence hitting BUG_ON() in dql_completed(). To avoid this, update BQL sent bytes before ringing doorbell. Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://lore.kernel.org/r/20231017105030.2310966-1-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-09-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni3-9/+23
Cross-merge networking fixes after downstream PR. No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19octeon_ep: restructured interrupt handlersShinas Rasheed3-45/+323
Separated queue specific interrupts to register to individual msix-vectors instead of using a single generic interrupt handler on a single msix-vector. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://lore.kernel.org/r/20230918065621.2165449-1-srasheed@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-18octeon_ep: support to fetch firmware infoShinas Rasheed6-17/+77
Add support to fetch firmware info such as heartbeat miss count, heartbeat interval. This shall be used for heartbeat monitor. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15octeon_ep: fix tx dma unmap len values in SGShinas Rasheed3-9/+23
Lengths of SG pointers are kept in the following order in the SG entries in hardware. 63 48|47 32|31 16|15 0 ----------------------------------------- | Len 0 | Len 1 | Len 2 | Len 3 | ----------------------------------------- | Ptr 0 | ----------------------------------------- | Ptr 1 | ----------------------------------------- | Ptr 2 | ----------------------------------------- | Ptr 3 | ----------------------------------------- Dma pointers have to be unmapped based on their respective lengths given in this format. Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-5/+6
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/sfc/tc.c fa165e194997 ("sfc: don't unregister flow_indr if it was never registered") 3bf969e88ada ("sfc: add MAE table machinery for conntrack table") https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-15octeon_ep: cancel queued works in probe error pathMichal Schmidt1-3/+4
If it fails to get the devices's MAC address, octep_probe exits while leaving the delayed work intr_poll_task queued. When the work later runs, it's a use after free. Move the cancelation of intr_poll_task from octep_remove into octep_device_cleanup. This does not change anything in the octep_remove flow, but octep_device_cleanup is called also in the octep_probe error path, where the cancelation is needed. Note that the cancelation of ctrl_mbox_task has to follow intr_poll_task's, because the ctrl_mbox_task may be queued by intr_poll_task. Fixes: 24d4333233b3 ("octeon_ep: poll for control messages") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Link: https://lore.kernel.org/r/20230810150114.107765-5-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-15octeon_ep: cancel ctrl_mbox_task after intr_poll_taskMichal Schmidt1-1/+1
intr_poll_task may queue ctrl_mbox_task. The function octep_poll_non_ioq_interrupts_cn93_pf does this. When removing the driver and canceling these two works, cancel ctrl_mbox_task last to guarantee it does not run anymore. Fixes: 24d4333233b3 ("octeon_ep: poll for control messages") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Link: https://lore.kernel.org/r/20230810150114.107765-4-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-15octeon_ep: cancel tx_timeout_task later in remove sequenceMichal Schmidt1-1/+1
tx_timeout_task is canceled too early when removing the driver. Nothing prevents .ndo_tx_timeout from triggering and queuing the work again. Better cancel it after the netdev is unregistered. It's harmless for octep_tx_timeout_task to run in the window between the unregistration and cancelation, because it checks netif_running. Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Link: https://lore.kernel.org/r/20230810150114.107765-3-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-15octeon_ep: fix timeout value for waiting on mbox responseMichal Schmidt1-1/+1
The intention was to wait up to 500 ms for the mbox response. The third argument to wait_event_interruptible_timeout() is supposed to be the timeout duration. The driver mistakenly passed absolute time instead. Fixes: 577f0d1b1c5f ("octeon_ep: add separate mailbox command and response queues") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230810150114.107765-2-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-11octeon_ep: Add control plane host and firmware versions.Sathesh Edara5-3/+64
Implement control plane mailbox versions for host and firmware. Versions are published in info area of control mailbox bar4 memory structure.Firmware will publish minimum and maximum supported versions.Control plane mailbox apis will check for firmware version before sending any control commands to firmware. Notifications from firmware will similarly be checked for host version compatibility. Signed-off-by: Sathesh Edara <sedara@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-01octeon_ep: initialize mbox mutexesMichal Schmidt1-0/+3
The two mbox-related mutexes are destroyed in octep_ctrl_mbox_uninit(), but the corresponding mutex_init calls were missing. A "DEBUG_LOCKS_WARN_ON(lock->magic != lock)" warning was emitted with CONFIG_DEBUG_MUTEXES on. Initialize the two mutexes in octep_ctrl_mbox_init(). Fixes: 577f0d1b1c5f ("octeon_ep: add separate mailbox command and response queues") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230729151516.24153-1-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-27octeon_ep: use vmalloc_array and vcallocJulia Lawall1-1/+1
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-3-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-16octeon_ep: Add missing check for ioremapJiasheng Jiang1-1/+6
Add check for ioremap() and return the error if it fails in order to guarantee the success of ioremap(). Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://lore.kernel.org/r/20230615033400.2971-1-jiasheng@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-30octeon_ep: unlock the correct lock on error pathDan Carpenter1-1/+1
The h and the f letters are swapped so it unlocks the wrong lock. Fixes: 577f0d1b1c5f ("octeon_ep: add separate mailbox command and response queues") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/251aa2a2-913e-4868-aac9-0a90fc3eeeda@kili.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-27octeon_ep: add heartbeat monitorVeerasenareddy Burru5-2/+66
Monitor periodic heartbeat messages from device firmware. Presence of heartbeat indicates the device is active and running. If the heartbeat is missed for configured interval indicates firmware has crashed and device is unusable; in this case, PF driver stops and uninitialize the device. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: function id in link info and stats mailbox commandsVeerasenareddy Burru4-31/+40
Update control mailbox API to include function id in get stats and link info. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: support asynchronous notificationsVeerasenareddy Burru1-0/+29
Add asynchronous notification support to the control mailbox. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: include function id in mailbox commandsVeerasenareddy Burru4-39/+63
Extend control command structure to include vfid and update APIs to accept VF ID. Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: add separate mailbox command and response queuesVeerasenareddy Burru6-411/+529
Enhance control mailbox protocol to support following - separate command and response queues * command queue to send control commands to firmware. * response queue to receive responses and notifications from firmware. - variable size messages using scatter/gather Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: control mailbox for multiple PFsVeerasenareddy Burru1-1/+15
Add control mailbox support for multiple PFs. Update control mbox base address calculation based on PF function link. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: poll for control messagesVeerasenareddy Burru4-27/+70
Poll for control messages until interrupts are enabled. All the interrupts are enabled in ndo_open(). Add ability to listen for notifications from firmware before ndo_open(). Once interrupts are enabled, this polling is disabled and all the messages are processed by bottom half of interrupt handler. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: defer probe if firmware not readyVeerasenareddy Burru1-0/+26
Defer probe if firmware is not ready for device usage. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: Satananda Burla <sburla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-09octeon_ep: Drop redundant pci_enable_pcie_error_reporting()Bjorn Helgaas1-4/+0
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Veerasenareddy Burru <vburru@marvell.com> Cc: Abhijit Ayarekar <aayarekar@marvell.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-5/+11
include/linux/bpf.h 1f6e04a1c7b8 ("bpf: Fix offset calculation error in __copy_map_value and zero_map_value") aa3496accc41 ("bpf: Refactor kptr_off_tab into btf_record") f71b2f64177a ("bpf: Refactor map->off_arr handling") https://lore.kernel.org/all/20221114095000.67a73239@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-14octeon_ep: ensure get mac address successfully before eth_hw_addr_set()Ziyang Xuan1-1/+5
octep_get_mac_addr() can fail because send mbox message failed. If this happens, octep_dev->mac_addr will be zero. It should not continue to initialize. Add exception handling for octep_get_mac_addr() to fix it. Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-28 18:32:35 +0300