summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mellanox/mlx5/core
AgeCommit message (Collapse)AuthorFilesLines
2024-07-11net/mlx5e: Add mqprio_rl cleanup and free in mlx5e_priv_cleanup()Jianbo Liu1-0/+5
[ Upstream commit 1da839eab6dbc26b95bfcd1ed1a4d1aaa5c144a3 ] In the cited commit, mqprio_rl cleanup and free are mistakenly removed in mlx5e_priv_cleanup(), and it causes the leakage of host memory and firmware SCHEDULING_ELEMENT objects while changing eswitch mode. So, add them back. Fixes: 0bb7228f7096 ("net/mlx5e: Fix mqprio_rl handling on devlink reload") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-11net/mlx5: E-switch, Create ingress ACL when neededChris Mi1-8/+29
[ Upstream commit b20c2fb45470d0c7a603613c9cfa5d45720e17f2 ] Currently, ingress acl is used for three features. It is created only when vport metadata match and prio tag are enabled. But active-backup lag mode also uses it. It is independent of vport metadata match and prio tag. And vport metadata match can be disabled using the following devlink command: # devlink dev param set pci/0000:08:00.0 name esw_port_metadata \ value false cmode runtime If ingress acl is not created, will hit panic when creating drop rule for active-backup lag mode. If always create it, there will be about 5% performance degradation. Fix it by creating ingress acl when needed. If esw_port_metadata is true, ingress acl exists, then create drop rule using existing ingress acl. If esw_port_metadata is false, create ingress acl and then create drop rule. Fixes: 1749c4c51c16 ("net/mlx5: E-switch, add drop rule support to ingress ACL") Signed-off-by: Chris Mi <cmi@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-21net/mlx5e: Fix features validation check for tunneled UDP (non-VXLAN) packetsGal Pressman1-2/+1
[ Upstream commit 791b4089e326271424b78f2fae778b20e53d071b ] Move the vxlan_features_check() call to after we verified the packet is a tunneled VXLAN packet. Without this, tunneled UDP non-VXLAN packets (for ex. GENENVE) might wrongly not get offloaded. In some cases, it worked by chance as GENEVE header is the same size as VXLAN, but it is obviously incorrect. Fixes: e3cfc7e6b7bd ("net/mlx5e: TX, Add geneve tunnel stateless offload support") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-21net/mlx5: Fix tainted pointer delete is case of flow rules creation failAleksandr Mishin1-2/+6
[ Upstream commit 229bedbf62b13af5aba6525ad10b62ad38d9ccb5 ] In case of flow rule creation fail in mlx5_lag_create_port_sel_table(), instead of previously created rules, the tainted pointer is deleted deveral times. Fix this bug by using correct flow rules pointers. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 352899f384d4 ("net/mlx5: Lag, use buckets in hash mode") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240604100552.25201-1-amishin@t-argos.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-21net/mlx5: Always stop health timer during driver removalShay Drory1-0/+3
[ Upstream commit c8b3f38d2dae0397944814d691a419c451f9906f ] Currently, if teardown_hca fails to execute during driver removal, mlx5 does not stop the health timer. Afterwards, mlx5 continue with driver teardown. This may lead to a UAF bug, which results in page fault Oops[1], since the health timer invokes after resources were freed. Hence, stop the health monitor even if teardown_hca fails. [1] mlx5_core 0000:18:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: cleanup mlx5_core 0000:18:00.0: wait_func:1155:(pid 1967079): TEARDOWN_HCA(0x103) timeout. Will cause a leak of a command resource mlx5_core 0000:18:00.0: mlx5_function_close:1288:(pid 1967079): tear_down_hca failed, skip cleanup BUG: unable to handle page fault for address: ffffa26487064230 PGD 100c00067 P4D 100c00067 PUD 100e5a067 PMD 105ed7067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE ------- --- 6.7.0-68.fc38.x86_64 #1 Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 RIP: 0010:ioread32be+0x34/0x60 RSP: 0018:ffffa26480003e58 EFLAGS: 00010292 RAX: ffffa26487064200 RBX: ffff9042d08161a0 RCX: ffff904c108222c0 RDX: 000000010bbf1b80 RSI: ffffffffc055ddb0 RDI: ffffa26487064230 RBP: ffff9042d08161a0 R08: 0000000000000022 R09: ffff904c108222e8 R10: 0000000000000004 R11: 0000000000000441 R12: ffffffffc055ddb0 R13: ffffa26487064200 R14: ffffa26480003f00 R15: ffff904c108222c0 FS: 0000000000000000(0000) GS:ffff904c10800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa26487064230 CR3: 00000002c4420006 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x175/0x180 ? asm_exc_page_fault+0x26/0x30 ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? ioread32be+0x34/0x60 mlx5_health_check_fatal_sensors+0x20/0x100 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] poll_health+0x42/0x230 [mlx5_core] ? __next_timer_interrupt+0xbc/0x110 ? __pfx_poll_health+0x10/0x10 [mlx5_core] call_timer_fn+0x21/0x130 ? __pfx_poll_health+0x10/0x10 [mlx5_core] __run_timers+0x222/0x2c0 run_timer_softirq+0x1d/0x40 __do_softirq+0xc9/0x2c8 __irq_exit_rcu+0xa6/0xc0 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:cpuidle_enter_state+0xcc/0x440 ? cpuidle_enter_state+0xbd/0x440 cpuidle_enter+0x2d/0x40 do_idle+0x20d/0x270 cpu_startup_entry+0x2a/0x30 rest_init+0xd0/0xd0 arch_call_rest_init+0xe/0x30 start_kernel+0x709/0xa90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0x96/0xa0 secondary_startup_64_no_verify+0x18f/0x19b ---[ end trace 0000000000000000 ]--- Fixes: 9b98d395b85d ("net/mlx5: Start health poll at earlier stage of driver load") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-21net/mlx5: Stop waiting for PCI if pci channel is offlineMoshe Shemesh3-0/+16
[ Upstream commit 33afbfcc105a572159750f2ebee834a8a70fdd96 ] In case pci channel becomes offline the driver should not wait for PCI reads during health dump and recovery flow. The driver has timeout for each of these loops trying to read PCI, so it would fail anyway. However, in case of recovery waiting till timeout may cause the pci error_detected() callback fail to meet pci_dpc_recovered() wait timeout. Fixes: b3bd076f7501 ("net/mlx5: Report devlink health on FW fatal issues") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12net/mlx5e: Fix UDP GSO for encapsulated packetsGal Pressman2-2/+12
[ Upstream commit 83fea49f2711fc90c0d115b0ed04046b45155b65 ] When the skb is encapsulated, adjust the inner UDP header instead of the outer one, and account for UDP header (instead of TCP) in the inline header size calculation. Fixes: 689adf0d4892 ("net/mlx5e: Add UDP GSO support") Reported-by: Jason Baron <jbaron@akamai.com> Closes: https://lore.kernel.org/netdev/c42961cb-50b9-4a9a-bd43-87fe48d88d29@akamai.com/ Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12net/mlx5e: Use rx_missed_errors instead of rx_dropped for reporting buffer ↵Carolina Jubran1-1/+1
exhaustion [ Upstream commit 5c74195d5dd977e97556e6fa76909b831c241230 ] Previously, the driver incorrectly used rx_dropped to report device buffer exhaustion. According to the documentation, rx_dropped should not be used to count packets dropped due to buffer exhaustion, which is the purpose of rx_missed_errors. Use rx_missed_errors as intended for counting packets dropped due to buffer exhaustion. Fixes: 269e6b3af3bf ("net/mlx5e: Report additional error statistics in get stats ndo") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12net/mlx5e: Fix IPsec tunnel mode offload feature checkRahul Rameshbabu1-12/+5
[ Upstream commit 9a52f6d44f4521773b4699b4ed34b8e21d5a175c ] Remove faulty check disabling checksum offload and GSO for offload of simple IPsec tunnel L4 traffic. Comment previously describing the deleted code incorrectly claimed the check prevented double tunnel (or three layers of ip headers). Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12net/mlx5: Use mlx5_ipsec_rx_status_destroy to correctly delete status rulesRahul Rameshbabu1-2/+1
[ Upstream commit 16d66a4fa81da07bc4ed19f4e53b87263c2f8d38 ] rx_create no longer allocates a modify_hdr instance that needs to be cleaned up. The mlx5_modify_header_dealloc call will lead to a NULL pointer dereference. A leak in the rules also previously occurred since there are now two rules populated related to status. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 109907067 P4D 109907067 PUD 116890067 PMD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 484 Comm: ip Not tainted 6.9.0-rc2-rrameshbabu+ #254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/2014 RIP: 0010:mlx5_modify_header_dealloc+0xd/0x70 <snip> Call Trace: <TASK> ? show_regs+0x60/0x70 ? __die+0x24/0x70 ? page_fault_oops+0x15f/0x430 ? free_to_partial_list.constprop.0+0x79/0x150 ? do_user_addr_fault+0x2c9/0x5c0 ? exc_page_fault+0x63/0x110 ? asm_exc_page_fault+0x27/0x30 ? mlx5_modify_header_dealloc+0xd/0x70 rx_create+0x374/0x590 rx_add_rule+0x3ad/0x500 ? rx_add_rule+0x3ad/0x500 ? mlx5_cmd_exec+0x2c/0x40 ? mlx5_create_ipsec_obj+0xd6/0x200 mlx5e_accel_ipsec_fs_add_rule+0x31/0xf0 mlx5e_xfrm_add_state+0x426/0xc00 <snip> Fixes: 94af50c0a9bb ("net/mlx5e: Unify esw and normal IPsec status table creation/destruction") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12net/mlx5: Lag, do bond only if slaves agree on roce stateMaher Sanalla1-2/+10
[ Upstream commit 51ef9305b8f40946d65c40368ffb4c14636d369a ] Currently, the driver does not enforce that lag bond slaves must have matching roce capabilities. Yet, in mlx5_do_bond(), the driver attempts to enable roce on all vports of the bond slaves, causing the following syndrome when one slave has no roce fw support: mlx5_cmd_out_err:809:(pid 25427): MODIFY_NIC_VPORT_CONTEXT(0×755) op_mod(0×0) failed, status bad parameter(0×3), syndrome (0xc1f678), err(-22) Thus, create HW lag only if bond's slaves agree on roce state, either all slaves have roce support resulting in a roce lag bond, or none do, resulting in a raw eth bond. Fixes: 7907f23adc18 ("net/mlx5: Implement RoCE LAG feature") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12net/mlx5: Discard command completions in internal errorAkiva Goldberger1-0/+3
[ Upstream commit db9b31aa9bc56ff0d15b78f7e827d61c4a096e40 ] Fix use after free when FW completion arrives while device is in internal error state. Avoid calling completion handler in this case, since the device will flush the command interface and trigger all completions manually. Kernel log: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0xd8/0xe0 ... Call Trace: <IRQ> ? __warn+0x79/0x120 ? refcount_warn_saturate+0xd8/0xe0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0xd8/0xe0 cmd_ent_put+0x13b/0x160 [mlx5_core] mlx5_cmd_comp_handler+0x5f9/0x670 [mlx5_core] cmd_comp_notifier+0x1f/0x30 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 mlx5_eq_async_int+0xf6/0x290 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x4b/0x160 handle_irq_event+0x2e/0x80 handle_edge_irq+0x98/0x230 __common_interrupt+0x3b/0xa0 common_interrupt+0x7b/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 Fixes: 51d138c2610a ("net/mlx5: Fix health error state handling") Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240509112951.590184-6-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12net/mlx5: Add a timeout to acquire the command queue semaphoreAkiva Goldberger1-9/+32
[ Upstream commit 485d65e1357123a697c591a5aeb773994b247ad7 ] Prevent forced completion handling on an entry that has not yet been assigned an index, causing an out of bounds access on idx = -22. Instead of waiting indefinitely for the sem, blocking flow now waits for index to be allocated or a sem acquisition timeout before beginning the timer for FW completion. Kernel log example: mlx5_core 0000:06:00.0: wait_func_handle_exec_timeout:1128:(pid 185911): cmd[-22]: CREATE_UCTX(0xa04) No done completion Fixes: 8e715cd613a1 ("net/mlx5: Set command entry semaphore up once got index free") Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240509112951.590184-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12net/mlx5: Reload only IB representors upon lag disable/enableMaher Sanalla4-17/+25
[ Upstream commit 0f06228d4a2dcc1fca5b3ddb0eefa09c05b102c4 ] On lag disable, the bond IB device along with all of its representors are destroyed, and then the slaves' representors get reloaded. In case the slave IB representor load fails, the eswitch error flow unloads all representors, including ethernet representors, where the netdevs get detached and removed from lag bond. Such flow is inaccurate as the lag driver is not responsible for loading/unloading ethernet representors. Furthermore, the flow described above begins by holding lag lock to prevent bond changes during disable flow. However, when reaching the ethernet representors detachment from lag, the lag lock is required again, triggering the following deadlock: Call trace: __switch_to+0xf4/0x148 __schedule+0x2c8/0x7d0 schedule+0x50/0xe0 schedule_preempt_disabled+0x18/0x28 __mutex_lock.isra.13+0x2b8/0x570 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x4c/0x68 mlx5_lag_remove_netdev+0x3c/0x1a0 [mlx5_core] mlx5e_uplink_rep_disable+0x70/0xa0 [mlx5_core] mlx5e_detach_netdev+0x6c/0xb0 [mlx5_core] mlx5e_netdev_change_profile+0x44/0x138 [mlx5_core] mlx5e_netdev_attach_nic_profile+0x28/0x38 [mlx5_core] mlx5e_vport_rep_unload+0x184/0x1b8 [mlx5_core] mlx5_esw_offloads_rep_load+0xd8/0xe0 [mlx5_core] mlx5_eswitch_reload_reps+0x74/0xd0 [mlx5_core] mlx5_disable_lag+0x130/0x138 [mlx5_core] mlx5_lag_disable_change+0x6c/0x70 [mlx5_core] // hold ldev->lock mlx5_devlink_eswitch_mode_set+0xc0/0x410 [mlx5_core] devlink_nl_cmd_eswitch_set_doit+0xdc/0x180 genl_family_rcv_msg_doit.isra.17+0xe8/0x138 genl_rcv_msg+0xe4/0x220 netlink_rcv_skb+0x44/0x108 genl_rcv+0x40/0x58 netlink_unicast+0x198/0x268 netlink_sendmsg+0x1d4/0x418 sock_sendmsg+0x54/0x60 __sys_sendto+0xf4/0x120 __arm64_sys_sendto+0x30/0x40 el0_svc_common+0x8c/0x120 do_el0_svc+0x30/0xa0 el0_svc+0x20/0x30 el0_sync_handler+0x90/0xb8 el0_sync+0x160/0x180 Thus, upon lag enable/disable, load and unload only the IB representors of the slaves preventing the deadlock mentioned above. While at it, refactor the mlx5_esw_offloads_rep_load() function to have a static helper method for its internal logic, in symmetry with the representor unload design. Fixes: 598fe77df855 ("net/mlx5: Lag, Create shared FDB when in switchdev mode") Co-developed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240509112951.590184-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12net/mlx5: Enable 4 ports multiport E-switchShay Drory1-9/+9
[ Upstream commit e738e355045237ee8802cb2b31a8ed6f4b7ac534 ] enable_mpesw() assumed only 2 ports are available, fix this by removing that assumption and looping through the existing lag ports to enable multi-port E-switch for cards with more than 2 ports. Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Stable-dep-of: 0f06228d4a2d ("net/mlx5: Reload only IB representors upon lag disable/enable") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12mlx5: stop warning for 64KB pagesArnd Bergmann1-2/+4
[ Upstream commit a5535e5336943b33689f558199366102387b7bbf ] When building with 64KB pages, clang points out that xsk->chunk_size can never be PAGE_SIZE: drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c:19:22: error: result of comparison of constant 65536 with expression of type 'u16' (aka 'unsigned short') is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (xsk->chunk_size > PAGE_SIZE || ~~~~~~~~~~~~~~~ ^ ~~~~~~~~~ In older versions of this code, using PAGE_SIZE was the only possibility, so this would have never worked on 64KB page kernels, but the patch apparently did not address this case completely. As Maxim Mikityanskiy suggested, 64KB chunks are really not all that useful, so just shut up the warning by adding a cast. Fixes: 282c0c798f8e ("net/mlx5e: Allow XSK frames smaller than a page") Link: https://lore.kernel.org/netdev/20211013150232.2942146-1-arnd@kernel.org/ Link: https://lore.kernel.org/lkml/a7b27541-0ebb-4f2d-bd06-270a4d404613@app.fastmail.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com> Reviewed-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240328143051.1069575-9-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12mlx5: avoid truncating error messageArnd Bergmann1-1/+1
[ Upstream commit b324a960354b872431d25959ad384ab66a7116ec ] clang warns that one error message is too long for its destination buffer: drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c:1876:4: error: 'snprintf' will always be truncated; specified size is 80, but format string expands to at least 94 [-Werror,-Wformat-truncation-non-kprintf] Reword it to be a bit shorter so it always fits. Fixes: 70f0302b3f20 ("net/mlx5: Bridge, implement mdb offload") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://lore.kernel.org/r/20240326223825.4084412-5-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02net/mlx5e: Advertise mlx5 ethernet driver updates sk_buff md_dst for MACsecRahul Rameshbabu1-0/+1
commit 39d26a8f2efcb8b5665fe7d54a7dba306a8f1dff upstream. mlx5 Rx flow steering and CQE handling enable the driver to be able to update an skb's md_dst attribute as MACsec when MACsec traffic arrives when a device is configured for offloading. Advertise this to the core stack to take advantage of this capability. Cc: stable@vger.kernel.org Fixes: b7c9400cbc48 ("net/mlx5e: Implement MACsec Rx data path using MACsec skb_metadata_dst") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20240423181319.115860-5-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27net/mlx5: E-switch, store eswitch pointer before registering devlink_paramShay Drory2-6/+7
[ Upstream commit 0553e753ea9ee724acaf6b3dfc7354702af83567 ] Next patch will move devlink register to be first. Therefore, whenever mlx5 will register a param, the user will be notified. In order to notify the user, devlink is using the get() callback of the param. Hence, resources that are being used by the get() callback must be set before the devlink param is registered. Therefore, store eswitch pointer inside mdev before registering the param. Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27net/mlx5e: Prevent deadlock while disabling aRFSCarolina Jubran1-11/+16
[ Upstream commit fef965764cf562f28afb997b626fc7c3cec99693 ] When disabling aRFS under the `priv->state_lock`, any scheduled aRFS works are canceled using the `cancel_work_sync` function, which waits for the work to end if it has already started. However, while waiting for the work handler, the handler will try to acquire the `state_lock` which is already acquired. The worker acquires the lock to delete the rules if the state is down, which is not the worker's responsibility since disabling aRFS deletes the rules. Add an aRFS state variable, which indicates whether the aRFS is enabled and prevent adding rules when the aRFS is disabled. Kernel log: ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Tainted: G I ------------------------------------------------------ ethtool/386089 is trying to acquire lock: ffff88810f21ce68 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}, at: __flush_work+0x74/0x4e0 but task is already holding lock: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&priv->state_lock){+.+.}-{3:3}: __mutex_lock+0x80/0xc90 arfs_handle_work+0x4b/0x3b0 [mlx5_core] process_one_work+0x1dc/0x4a0 worker_thread+0x1bf/0x3c0 kthread+0xd7/0x100 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 -> #0 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}: __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 __flush_work+0x7a/0x4e0 __cancel_work_timer+0x131/0x1c0 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1a1/0x270 netlink_sendmsg+0x214/0x460 __sock_sendmsg+0x38/0x60 __sys_sendto+0x113/0x170 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); *** DEADLOCK *** 3 locks held by ethtool/386089: #0: ffffffff82ea7210 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 #1: ffffffff82e94c88 (rtnl_mutex){+.+.}-{3:3}, at: ethnl_default_set_doit+0xd3/0x240 #2: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] stack backtrace: CPU: 15 PID: 386089 Comm: ethtool Tainted: G I 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x60/0xa0 check_noncircular+0x144/0x160 __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 ? __flush_work+0x74/0x4e0 ? save_trace+0x3e/0x360 ? __flush_work+0x74/0x4e0 __flush_work+0x7a/0x4e0 ? __flush_work+0x74/0x4e0 ? __lock_acquire+0xa78/0x2c80 ? lock_acquire+0xd0/0x2b0 ? mark_held_locks+0x49/0x70 __cancel_work_timer+0x131/0x1c0 ? mark_held_locks+0x49/0x70 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 ? ethnl_ops_begin+0xb0/0xb0 ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1a1/0x270 netlink_sendmsg+0x214/0x460 __sock_sendmsg+0x38/0x60 __sys_sendto+0x113/0x170 ? do_user_addr_fault+0x53f/0x8f0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e </TASK> Fixes: 45bf454ae884 ("net/mlx5e: Enabling aRFS mechanism") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240411115444.374475-7-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27net/mlx5: Lag, restore buckets number to default after hash LAG deactivationShay Drory1-1/+3
[ Upstream commit 37cc10da3a50e6d0cb9808a90b7da9b4868794dd ] The cited patch introduces the concept of buckets in LAG in hash mode. However, the patch doesn't clear the number of buckets in the LAG deactivation. This results in using the wrong number of buckets in case user create a hash mode LAG and afterwards create a non-hash mode LAG. Hence, restore buckets number to default after hash mode LAG deactivation. Fixes: 352899f384d4 ("net/mlx5: Lag, use buckets in hash mode") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240411115444.374475-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-17net/mlx5e: Do not produce metadata freelist entries in Tx port ts WQE xmitRahul Rameshbabu2-5/+10
[ Upstream commit 86b0ca5b118d3a0bae5e5645a13e66f8a4f6c525 ] Free Tx port timestamping metadata entries in the NAPI poll context and consume metadata enties in the WQE xmit path. Do not free a Tx port timestamping metadata entry in the WQE xmit path even in the error path to avoid a race between two metadata entry producers. Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-10-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-17net/mlx5e: HTB, Fix inconsistencies with QoS SQs numberCarolina Jubran1-16/+17
[ Upstream commit 2f436f1869771d46e1a9f85738d5a1a7c5653a4e ] When creating a new HTB class while the interface is down, the variable that follows the number of QoS SQs (htb_max_qos_sqs) may not be consistent with the number of HTB classes. Previously, we compared these two values to ensure that the node_qid is lower than the number of QoS SQs, and we allocated stats for that SQ when they are equal. Change the check to compare the node_qid with the current number of leaf nodes and fix the checking conditions to ensure allocation of stats_list and stats for each node. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-9-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-17net/mlx5e: Fix mlx5e_priv_init() cleanup flowCarolina Jubran2-2/+2
[ Upstream commit ecb829459a841198e142f72fadab56424ae96519 ] When mlx5e_priv_init() fails, the cleanup flow calls mlx5e_selq_cleanup which calls mlx5e_selq_apply() that assures that the `priv->state_lock` is held using lockdep_is_held(). Acquire the state_lock in mlx5e_selq_cleanup(). Kernel log: ============================= WARNING: suspicious RCU usage 6.8.0-rc3_net_next_841a9b5 #1 Not tainted ----------------------------- drivers/net/ethernet/mellanox/mlx5/core/en/selq.c:124 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by systemd-modules/293: #0: ffffffffa05067b0 (devices_rwsem){++++}-{3:3}, at: ib_register_client+0x109/0x1b0 [ib_core] #1: ffff8881096c65c0 (&device->client_data_rwsem){++++}-{3:3}, at: add_client_context+0x104/0x1c0 [ib_core] stack backtrace: CPU: 4 PID: 293 Comm: systemd-modules Not tainted 6.8.0-rc3_net_next_841a9b5 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x8a/0xa0 lockdep_rcu_suspicious+0x154/0x1a0 mlx5e_selq_apply+0x94/0xa0 [mlx5_core] mlx5e_selq_cleanup+0x3a/0x60 [mlx5_core] mlx5e_priv_init+0x2be/0x2f0 [mlx5_core] mlx5_rdma_setup_rn+0x7c/0x1a0 [mlx5_core] rdma_init_netdev+0x4e/0x80 [ib_core] ? mlx5_rdma_netdev_free+0x70/0x70 [mlx5_core] ipoib_intf_init+0x64/0x550 [ib_ipoib] ipoib_intf_alloc+0x4e/0xc0 [ib_ipoib] ipoib_add_one+0xb0/0x360 [ib_ipoib] add_client_context+0x112/0x1c0 [ib_core] ib_register_client+0x166/0x1b0 [ib_core] ? 0xffffffffa0573000 ipoib_init_module+0xeb/0x1a0 [ib_ipoib] do_one_initcall+0x61/0x250 do_init_module+0x8a/0x270 init_module_from_file+0x8b/0xd0 idempotent_init_module+0x17d/0x230 __x64_sys_finit_module+0x61/0xb0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x46/0x4e </TASK> Fixes: 8bf30be75069 ("net/mlx5e: Introduce select queue parameters") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-8-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-17net/mlx5: Correctly compare pkt reformat idsCosmin Ratiu1-2/+12
[ Upstream commit 9eca93f4d5ab03905516a68683674d9c50ff95bd ] struct mlx5_pkt_reformat contains a naked union of a u32 id and a dr_action pointer which is used when the action is SW-managed (when pkt_reformat.owner is set to MLX5_FLOW_RESOURCE_OWNER_SW). Using id directly in that case is incorrect, as it maps to the least significant 32 bits of the 64-bit pointer in mlx5_fs_dr_action and not to the pkt reformat id allocated in firmware. For the purpose of comparing whether two rules are identical, interpreting the least significant 32 bits of the mlx5_fs_dr_action pointer as an id mostly works... until it breaks horribly and produces the outcome described in [1]. This patch fixes mlx5_flow_dests_cmp to correctly compare ids using mlx5_fs_dr_action_get_pkt_reformat_id for the SW-managed rules. Link: https://lore.kernel.org/netdev/ea5264d6-6b55-4449-a602-214c6f509c1e@163.com/T/#u [1] Fixes: 6a48faeeca10 ("net/mlx5: Add direct rule fs_cmd implementation") Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-6-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-17net/mlx5: Properly link new fs rules into the treeCosmin Ratiu1-1/+2
[ Upstream commit 7c6782ad4911cbee874e85630226ed389ff2e453 ] Previously, add_rule_fg would only add newly created rules from the handle into the tree when they had a refcount of 1. On the other hand, create_flow_handle tries hard to find and reference already existing identical rules instead of creating new ones. These two behaviors can result in a situation where create_flow_handle 1) creates a new rule and references it, then 2) in a subsequent step during the same handle creation references it again, resulting in a rule with a refcount of 2 that is not linked into the tree, will have a NULL parent and root and will result in a crash when the flow group is deleted because del_sw_hw_rule, invoked on rule deletion, assumes node->parent is != NULL. This happened in the wild, due to another bug related to incorrect handling of duplicate pkt_reformat ids, which lead to the code in create_flow_handle incorrectly referencing a just-added rule in the same flow handle, resulting in the problem described above. Full details are at [1]. This patch changes add_rule_fg to add new rules without parents into the tree, properly initializing them and avoiding the crash. This makes it more consistent with how rules are added to an FTE in create_flow_handle. Fixes: 74491de93712 ("net/mlx5: Add multi dest support") Link: https://lore.kernel.org/netdev/ea5264d6-6b55-4449-a602-214c6f509c1e@163.com/T/#u [1] Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-17net/mlx5: offset comp irq index in name by oneMichael Liang1-1/+3
[ Upstream commit 9f7e8fbb91f8fa29548e2f6ab50c03b628c67ede ] The mlx5 comp irq name scheme is changed a little bit between commit 3663ad34bc70 ("net/mlx5: Shift control IRQ to the last index") and commit 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation"). The index in the comp irq name used to start from 0 but now it starts from 1. There is nothing critical here, but it's harmless to change back to the old behavior, a.k.a starting from 0. Fixes: 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation") Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com> Reviewed-by: Yuanyuan Zhong <yzhong@purestorage.com> Signed-off-by: Michael Liang <mliang@purestorage.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-17net/mlx5: Register devlink first under devlink lockShay Drory2-18/+20
[ Upstream commit c6e77aa9dd82bc18a89bf49418f8f7e961cfccc8 ] In case device is having a non fatal FW error during probe, the driver will report the error to user via devlink. This will trigger a WARN_ON, since mlx5 is calling devlink_register() last. In order to avoid the WARN_ON[1], change mlx5 to invoke devl_register() first under devlink lock. [1] WARNING: CPU: 5 PID: 227 at net/devlink/health.c:483 devlink_recover_notify.constprop.0+0xb8/0xc0 CPU: 5 PID: 227 Comm: kworker/u16:3 Not tainted 6.4.0-rc5_for_upstream_min_debug_2023_06_12_12_38 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_health0000:08:00.0 mlx5_fw_reporter_err_work [mlx5_core] RIP: 0010:devlink_recover_notify.constprop.0+0xb8/0xc0 Call Trace: <TASK> ? __warn+0x79/0x120 ? devlink_recover_notify.constprop.0+0xb8/0xc0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? devlink_recover_notify.constprop.0+0xb8/0xc0 devlink_health_report+0x4a/0x1c0 mlx5_fw_reporter_err_work+0xa4/0xd0 [mlx5_core] process_one_work+0x1bb/0x3c0 ? process_one_work+0x3c0/0x3c0 worker_thread+0x4d/0x3c0 ? process_one_work+0x3c0/0x3c0 kthread+0xc6/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: cf530217408e ("devlink: Notify users when objects are accessible") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-3-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-17net/mlx5: SF, Stop waiting for FW as teardown was calledMoshe Shemesh1-8/+13
[ Upstream commit 137cef6d55564fb687d12fbc5f85be43ff7b53a7 ] When PF/VF teardown is called the driver sets the flag MLX5_BREAK_FW_WAIT to stop waiting for FW loading and initializing. Same should be applied to SF driver teardown to cut waiting time. On mlx5_sf_dev_remove() set the flag before draining health WQ as recovery flow may also wait for FW reloading while it is not relevant anymore. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Stable-dep-of: c6e77aa9dd82 ("net/mlx5: Register devlink first under devlink lock") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15net/mlx5e: Switch to using _bh variant of of spinlock API in port ↵Rahul Rameshbabu1-6/+6
timestamping NAPI poll context [ Upstream commit 90502d433c0e7e5483745a574cb719dd5d05b10c ] The NAPI poll context is a softirq context. Do not use normal spinlock API in this context to prevent concurrency issues. Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> CC: Vadim Fedorenko <vadfed@meta.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15net/mlx5e: Use a memory barrier to enforce PTP WQ xmit submission tracking ↵Rahul Rameshbabu1-0/+2
occurs after populating the metadata_map [ Upstream commit b7cf07586c40f926063d4d09f7de28ff82f62b2a ] Just simply reordering the functions mlx5e_ptp_metadata_map_put and mlx5e_ptpsq_track_metadata in the mlx5e_txwqe_complete context is not good enough since both the compiler and CPU are free to reorder these two functions. If reordering does occur, the issue that was supposedly fixed by 7e3f3ba97e6c ("net/mlx5e: Track xmit submission to PTP WQ after populating metadata map") will be seen. This will lead to NULL pointer dereferences in mlx5e_ptpsq_mark_ts_cqes_undelivered in the NAPI polling context due to the tracking list being populated before the metadata map. Fixes: 7e3f3ba97e6c ("net/mlx5e: Track xmit submission to PTP WQ after populating metadata map") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> CC: Vadim Fedorenko <vadfed@meta.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15net/mlx5e: Fix MACsec state loss upon state update in offload pathEmeel Hakim1-31/+51
[ Upstream commit a71f2147b64941efee156bfda54fd6461d0f95df ] The packet number attribute of the SA is incremented by the device rather than the software stack when enabling hardware offload. Because the packet number attribute is managed by the hardware, the software has no insight into the value of the packet number attribute actually written by the device. Previously when MACsec offload was enabled, the hardware object for handling the offload was destroyed when the SA was disabled. Re-enabling the SA would lead to a new hardware object being instantiated. This new hardware object would not have any recollection of the correct packet number for the SA. Instead, destroy the flow steering rule when deactivating the SA and recreate it upon reactivation, preserving the original hardware object. Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15net/mlx5e: Change the warning when ignore_flow_level is not supportedJianbo Liu1-1/+1
[ Upstream commit dd238b702064b21d25b4fc39a19699319746d655 ] Downgrade the print from mlx5_core_warn() to mlx5_core_dbg(), as it is just a statement of fact that firmware doesn't support ignore flow level. And change the wording to "firmware flow level support is missing", to make it more accurate. Fixes: ae2ee3be99a8 ("net/mlx5: CT: Remove warning of ignore_flow_level support for VFs") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Suggested-by: Elliott, Robert (Servers) <elliott@hpe.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15net/mlx5: Check capability for fw_resetMoshe Shemesh2-2/+26
[ Upstream commit 5e6107b499f3fc4748109e1d87fd9603b34f1e0d ] Functions which can't access MFRL (Management Firmware Reset Level) register, have no use of fw_reset structures or events. Remove fw_reset structures allocation and registration for fw reset events notifications for these functions. Having the devlink param enable_remote_dev_reset on functions that don't have this capability is misleading as these functions are not allowed to influence the reset flow. Hence, this patch removes this parameter for such functions. In addition, return not supported on devlink reload action fw_activate for these functions. Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15net/mlx5: E-switch, Change flow rule destination checkingJianbo Liu1-9/+14
[ Upstream commit 85ea2c5c5ef5f24fe6e6e7028ddd90be1cb5d27e ] The checking in the cited commit is not accurate. In the common case, VF destination is internal, and uplink destination is external. However, uplink destination with packet reformat is considered as internal because firmware uses LB+hairpin to support it. Update the checking so header rewrite rules with both internal and external destinations are not allowed. Fixes: e0e22d59b47a ("net/mlx5: E-switch, Add checking for flow rule destinations") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15Revert "net/mlx5e: Check the number of elements before walk TC rhashtable"Saeed Mahameed1-1/+1
[ Upstream commit b7bbd698c90591546d22093181e266785f08c18b ] This reverts commit 4e25b661f484df54b6751b65f9ea2434a3b67539. This Commit was mistakenly applied by pulling the wrong tag, remove it. Fixes: 4e25b661f484 ("net/mlx5e: Check the number of elements before walk TC rhashtable") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15Revert "net/mlx5: Block entering switchdev mode with ns inconsistency"Gavin Li1-23/+0
[ Upstream commit 8deeefb24786ea7950b37bde4516b286c877db00 ] This reverts commit 662404b24a4c4d839839ed25e3097571f5938b9b. The revert is required due to the suspicion it is not good for anything and cause crash. Fixes: 662404b24a4c ("net/mlx5e: Block entering switchdev mode with ns inconsistency") Signed-off-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-01net/mlx5e: fix a potential double-free in fs_any_create_groupsDinghao Liu1-0/+1
[ Upstream commit aef855df7e1bbd5aa4484851561211500b22707e ] When kcalloc() for ft->g succeeds but kvzalloc() for in fails, fs_any_create_groups() will free ft->g. However, its caller fs_any_create_table() will free ft->g again through calling mlx5e_destroy_flow_table(), which will lead to a double-free. Fix this by setting ft->g to NULL in fs_any_create_groups(). Fixes: 0f575c20bf06 ("net/mlx5e: Introduce Flow Steering ANY API") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-01net/mlx5e: fix a double-free in arfs_create_groupsZhipeng Lu1-11/+15
[ Upstream commit 3c6d5189246f590e4e1f167991558bdb72a4738b ] When `in` allocated by kvzalloc fails, arfs_create_groups will free ft->g and return an error. However, arfs_create_table, the only caller of arfs_create_groups, will hold this error and call to mlx5e_destroy_flow_table, in which the ft->g will be freed again. Fixes: 1cabe6b0965e ("net/mlx5e: Create aRFS flow tables") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-01net/mlx5e: Ignore IPsec replay window values on sender sideLeon Romanovsky1-2/+8
[ Upstream commit 315a597f9bcfe7fe9980985031413457bee95510 ] XFRM stack doesn't prevent from users to configure replay window in TX side and strongswan sets replay_window to be 1. It causes to failures in validation logic when trying to offload the SA. Replay window is not relevant in TX side and should be ignored. Fixes: cded6d80129b ("net/mlx5e: Store replay window in XFRM attributes") Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-01net/mlx5e: Allow software parsing when IPsec crypto is enabledLeon Romanovsky1-2/+2
[ Upstream commit 20f5468a7988dedd94a57ba8acd65ebda6a59723 ] All ConnectX devices have software parsing capability enabled, but it is more correct to set allow_swp only if capability exists, which for IPsec means that crypto offload is supported. Fixes: 2451da081a34 ("net/mlx5: Unify device IPsec capabilities check") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-01net/mlx5: Use mlx5 device constant for selecting CQ period mode for ASORahul Rameshbabu1-1/+1
[ Upstream commit 20cbf8cbb827094197f3b17db60d71449415db1e ] mlx5 devices have specific constants for choosing the CQ period mode. These constants do not have to match the constants used by the kernel software API for DIM period mode selection. Fixes: cdd04f4d4d71 ("net/mlx5: Add support to create SQ and CQ for ASO") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-01net/mlx5: DR, Can't go to uplink vport on RX ruleYevgeny Kliteynik1-5/+11
[ Upstream commit 5b2a2523eeea5f03d39a9d1ff1bad2e9f8eb98d2 ] Go-To-Vport action on RX is not allowed when the vport is uplink. In such case, the packet should be dropped. Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Erez Shitrit <erezsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-01net/mlx5: DR, Use the right GVMI number for drop actionYevgeny Kliteynik1-0/+1
[ Upstream commit 5665954293f13642f9c052ead83c1e9d8cff186f ] When FW provides ICM addresses for drop RX/TX, the provided capability is 64 bits that contain its GVMI as well as the ICM address itself. In case of TX DROP this GVMI is different from the GVMI that the domain is operating on. This patch fixes the action to use these GVMI IDs, as provided by FW. Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-01net/mlx5: Bridge, fix multicast packets sent to uplinkMoshe Shemesh2-0/+5
[ Upstream commit ec7cc38ef9f83553102e84c82536971a81630739 ] To enable multicast packets which are offloaded in bridge multicast offload mode to be sent also to uplink, FTE bit uplink_hairpin_en should be set. Add this bit to FTE for the bridge multicast offload rules. Fixes: 18c2916cee12 ("net/mlx5: Bridge, snoop igmp/mld packets") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-01net/mlx5: Bridge, Enable mcast in smfs steering modeErez Shitrit1-9/+2
[ Upstream commit 653b7eb9d74426397c95061fd57da3063625af65 ] In order to have mcast offloads the driver needs the following: It should know if that mcast comes from wire port, in addition the flow should not be marked as any specific source, that way it will give the flexibility for the driver not to be depended on the way iterator implemented in the FW. Signed-off-by: Erez Shitrit <erezsh@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Stable-dep-of: ec7cc38ef9f8 ("net/mlx5: Bridge, fix multicast packets sent to uplink") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-01net/mlx5: Fix a WARN upon a callback command failureYishai Hadas1-2/+3
[ Upstream commit cc8091587779cfaddb6b29c9e9edb9079a282cad ] The below WARN [1] is reported once a callback command failed. As a callback runs under an interrupt context, needs to use the IRQ save/restore variant. [1] DEBUG_LOCKS_WARN_ON(lockdep_hardirq_context()) WARNING: CPU: 15 PID: 0 at kernel/locking/lockdep.c:4353 lockdep_hardirqs_on_prepare+0x11b/0x180 Modules linked in: vhost_net vhost tap mlx5_vfio_pci vfio_pci vfio_pci_core vfio_iommu_type1 vfio mlx5_vdpa vringh vhost_iotlb vdpa nfnetlink_cttimeout openvswitch nsh ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle xt_conntrackxt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core CPU: 15 PID: 0 Comm: swapper/15 Tainted: G W 6.7.0-rc4+ #1587 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:lockdep_hardirqs_on_prepare+0x11b/0x180 Code: 00 5b c3 c3 e8 e6 0d 58 00 85 c0 74 d6 8b 15 f0 c3 76 01 85 d2 75 cc 48 c7 c6 04 a5 3b 82 48 c7 c7 f1 e9 39 82 e8 95 12 f9 ff <0f> 0b 5b c3 e8 bc 0d 58 00 85 c0 74 ac 8b 3d c6 c3 76 01 85 ff 75 RSP: 0018:ffffc900003ecd18 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027 RDX: 0000000000000000 RSI: ffff88885fbdb880 RDI: ffff88885fbdb888 RBP: 00000000ffffff87 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 284e4f5f4e524157 R12: 00000000002c9aa1 R13: ffff88810aace980 R14: ffff88810aace9b8 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff88885fbc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f731436f4c8 CR3: 000000010aae6001 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? __warn+0x81/0x170 ? lockdep_hardirqs_on_prepare+0x11b/0x180 ? report_bug+0xf8/0x1c0 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? lockdep_hardirqs_on_prepare+0x11b/0x180 ? lockdep_hardirqs_on_prepare+0x11b/0x180 trace_hardirqs_on+0x4a/0xa0 raw_spin_unlock_irq+0x24/0x30 cmd_status_err+0xc0/0x1a0 [mlx5_core] cmd_status_err+0x1a0/0x1a0 [mlx5_core] mlx5_cmd_exec_cb_handler+0x24/0x40 [mlx5_core] mlx5_cmd_comp_handler+0x129/0x4b0 [mlx5_core] cmd_comp_notifier+0x1a/0x20 [mlx5_core] notifier_call_chain+0x3e/0xe0 atomic_notifier_call_chain+0x5f/0x130 mlx5_eq_async_int+0xe7/0x200 [mlx5_core] notifier_call_chain+0x3e/0xe0 atomic_notifier_call_chain+0x5f/0x130 irq_int_handler+0x11/0x20 [mlx5_core] __handle_irq_event_percpu+0x99/0x220 ? tick_irq_enter+0x5d/0x80 handle_irq_event_percpu+0xf/0x40 handle_irq_event+0x3a/0x60 handle_edge_irq+0xa2/0x1c0 __common_interrupt+0x55/0x140 common_interrupt+0x7d/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0x13/0x20 Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 ea 08 25 01 85 c0 7e 07 0f 00 2d 7f b0 26 00 fb f4 <fa> c3 90 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 80 d0 02 00 RSP: 0018:ffffc9000010fec8 EFLAGS: 00000242 RAX: 0000000000000001 RBX: 000000000000000f RCX: 4000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff811c410c RBP: ffffffff829478c0 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? do_idle+0x1ec/0x210 default_idle_call+0x6c/0x90 do_idle+0x1ec/0x210 cpu_startup_entry+0x26/0x30 start_secondary+0x11b/0x150 secondary_startup_64_no_verify+0x165/0x16b </TASK> irq event stamp: 833284 hardirqs last enabled at (833283): [<ffffffff811c410c>] do_idle+0x1ec/0x210 hardirqs last disabled at (833284): [<ffffffff81daf9ef>] common_interrupt+0xf/0xa0 softirqs last enabled at (833224): [<ffffffff81dc199f>] __do_softirq+0x2bf/0x40e softirqs last disabled at (833177): [<ffffffff81178ddf>] irq_exit_rcu+0x7f/0xa0 Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs") Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-01net/mlx5e: Fix peer flow lists handlingVlad Buslov1-1/+2
[ Upstream commit d76fdd31f953ac5046555171620f2562715e9b71 ] The cited change refactored mlx5e_tc_del_fdb_peer_flow() to only clear DUP flag when list of peer flows has become empty. However, if any concurrent user holds a reference to a peer flow (for example, the neighbor update workqueue task is updating peer flow's parent encap entry concurrently), then the flow will not be removed from the peer list and, consecutively, DUP flag will remain set. Since mlx5e_tc_del_fdb_peers_flow() calls mlx5e_tc_del_fdb_peer_flow() for every possible peer index the algorithm will try to remove the flow from eswitch instances that it has never peered with causing either NULL pointer dereference when trying to remove the flow peer list head of peer_index that was never initialized or a warning if the list debug config is enabled[0]. Fix the issue by always removing the peer flow from the list even when not releasing the last reference to it. [0]: [ 3102.985806] ------------[ cut here ]------------ [ 3102.986223] list_del corruption, ffff888139110698->next is NULL [ 3102.986757] WARNING: CPU: 2 PID: 22109 at lib/list_debug.c:53 __list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.987561] Modules linked in: act_ct nf_flow_table bonding act_tunnel_key act_mirred act_skbedit vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcg ss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core [last unloaded: bonding] [ 3102.991113] CPU: 2 PID: 22109 Comm: revalidator28 Not tainted 6.6.0-rc6+ #3 [ 3102.991695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 3102.992605] RIP: 0010:__list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.993122] Code: 39 c2 74 56 48 8b 32 48 39 fe 75 62 48 8b 51 08 48 39 f2 75 73 b8 01 00 00 00 c3 48 89 fe 48 c7 c7 48 fd 0a 82 e8 41 0b ad ff <0f> 0b 31 c0 c3 48 89 fe 48 c7 c7 70 fd 0a 82 e8 2d 0b ad ff 0f 0b [ 3102.994615] RSP: 0018:ffff8881383e7710 EFLAGS: 00010286 [ 3102.995078] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 3102.995670] RDX: 0000000000000001 RSI: ffff88885f89b640 RDI: ffff88885f89b640 [ 3102.997188] DEL flow 00000000be367878 on port 0 [ 3102.998594] RBP: dead000000000122 R08: 0000000000000000 R09: c0000000ffffdfff [ 3102.999604] R10: 0000000000000008 R11: ffff8881383e7598 R12: dead000000000100 [ 3103.000198] R13: 0000000000000002 R14: ffff888139110000 R15: ffff888101901240 [ 3103.000790] FS: 00007f424cde4700(0000) GS:ffff88885f880000(0000) knlGS:0000000000000000 [ 3103.001486] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3103.001986] CR2: 00007fd42e8dcb70 CR3: 000000011e68a003 CR4: 0000000000370ea0 [ 3103.002596] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3103.003190] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3103.003787] Call Trace: [ 3103.004055] <TASK> [ 3103.004297] ? __warn+0x7d/0x130 [ 3103.004623] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.005094] ? report_bug+0xf1/0x1c0 [ 3103.005439] ? console_unlock+0x4a/0xd0 [ 3103.005806] ? handle_bug+0x3f/0x70 [ 3103.006149] ? exc_invalid_op+0x13/0x60 [ 3103.006531] ? asm_exc_invalid_op+0x16/0x20 [ 3103.007430] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.007910] mlx5e_tc_del_fdb_peers_flow+0xcf/0x240 [mlx5_core] [ 3103.008463] mlx5e_tc_del_flow+0x46/0x270 [mlx5_core] [ 3103.008944] mlx5e_flow_put+0x26/0x50 [mlx5_core] [ 3103.009401] mlx5e_delete_flower+0x25f/0x380 [mlx5_core] [ 3103.009901] tc_setup_cb_destroy+0xab/0x180 [ 3103.010292] fl_hw_destroy_filter+0x99/0xc0 [cls_flower] [ 3103.010779] __fl_delete+0x2d4/0x2f0 [cls_flower] [ 3103.011207] fl_delete+0x36/0x80 [cls_flower] [ 3103.011614] tc_del_tfilter+0x56f/0x750 [ 3103.011982] rtnetlink_rcv_msg+0xff/0x3a0 [ 3103.012362] ? netlink_ack+0x1c7/0x4e0 [ 3103.012719] ? rtnl_calcit.isra.44+0x130/0x130 [ 3103.013134] netlink_rcv_skb+0x54/0x100 [ 3103.013533] netlink_unicast+0x1ca/0x2b0 [ 3103.013902] netlink_sendmsg+0x361/0x4d0 [ 3103.014269] __sock_sendmsg+0x38/0x60 [ 3103.014643] ____sys_sendmsg+0x1f2/0x200 [ 3103.015018] ? copy_msghdr_from_user+0x72/0xa0 [ 3103.015265] ___sys_sendmsg+0x87/0xd0 [ 3103.016608] ? copy_msghdr_from_user+0x72/0xa0 [ 3103.017014] ? ___sys_recvmsg+0x9b/0xd0 [ 3103.017381] ? ttwu_do_activate.isra.137+0x58/0x180 [ 3103.017821] ? wake_up_q+0x49/0x90 [ 3103.018157] ? futex_wake+0x137/0x160 [ 3103.018521] ? __sys_sendmsg+0x51/0x90 [ 3103.018882] __sys_sendmsg+0x51/0x90 [ 3103.019230] ? exit_to_user_mode_prepare+0x56/0x130 [ 3103.019670] do_syscall_64+0x3c/0x80 [ 3103.020017] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 3103.020469] RIP: 0033:0x7f4254811ef4 [ 3103.020816] Code: 89 f3 48 83 ec 10 48 89 7c 24 08 48 89 14 24 e8 42 eb ff ff 48 8b 14 24 41 89 c0 48 89 de 48 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 48 89 04 24 e8 78 eb ff ff 48 8b [ 3103.022290] RSP: 002b:00007f424cdd9480 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 3103.022970] RAX: ffffffffffffffda RBX: 00007f424cdd9510 RCX: 00007f4254811ef4 [ 3103.023564] RDX: 0000000000000000 RSI: 00007f424cdd9510 RDI: 0000000000000012 [ 3103.024158] RBP: 00007f424cdda238 R08: 0000000000000000 R09: 00007f41d801a4b0 [ 3103.024748] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000001 [ 3103.025341] R13: 00007f424cdd9510 R14: 00007f424cdda240 R15: 00007f424cdd99a0 [ 3103.025931] </TASK> [ 3103.026182] ---[ end trace 0000000000000000 ]--- [ 3103.027033] ------------[ cut here ]------------ Fixes: 9be6c21fdcf8 ("net/mlx5e: Handle offloads flows per peer") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-01net/mlx5e: Fix operation precedence bug in port timestamping napi_poll contextRahul Rameshbabu1-1/+1
[ Upstream commit 3876638b2c7ebb2c9d181de1191db0de8cac143a ] Indirection (*) is of lower precedence than postfix increment (++). Logic in napi_poll context would cause an out-of-bound read by first increment the pointer address by byte address space and then dereference the value. Rather, the intended logic was to dereference first and then increment the underlying value. Fixes: 92214be5979c ("net/mlx5e: Update doorbell for port timestamping CQ before the software counter") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-01net/mlx5e: Correct snprintf truncation handling for fw_version buffer used ↵Rahul Rameshbabu1-1/+1
by representors [ Upstream commit b13559b76157de9d74f04d3ca0e49d69de3b5675 ] snprintf returns the length of the formatted string, excluding the trailing null, without accounting for truncation. This means that is the return value is greater than or equal to the size parameter, the fw_version string was truncated. Link: https://docs.kernel.org/core-api/kernel-api.html#c.snprintf Fixes: 1b2bd0c0264f ("net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-26 01:12:45 +0300