summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mellanox
AgeCommit message (Collapse)AuthorFilesLines
2024-03-02net/mlx5e: Fix MACsec state loss upon state update in offload pathEmeel Hakim1-31/+51
The packet number attribute of the SA is incremented by the device rather than the software stack when enabling hardware offload. Because the packet number attribute is managed by the hardware, the software has no insight into the value of the packet number attribute actually written by the device. Previously when MACsec offload was enabled, the hardware object for handling the offload was destroyed when the SA was disabled. Re-enabling the SA would lead to a new hardware object being instantiated. This new hardware object would not have any recollection of the correct packet number for the SA. Instead, destroy the flow steering rule when deactivating the SA and recreate it upon reactivation, preserving the original hardware object. Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-03-02net/mlx5e: Change the warning when ignore_flow_level is not supportedJianbo Liu1-1/+1
Downgrade the print from mlx5_core_warn() to mlx5_core_dbg(), as it is just a statement of fact that firmware doesn't support ignore flow level. And change the wording to "firmware flow level support is missing", to make it more accurate. Fixes: ae2ee3be99a8 ("net/mlx5: CT: Remove warning of ignore_flow_level support for VFs") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Suggested-by: Elliott, Robert (Servers) <elliott@hpe.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-03-02net/mlx5: Check capability for fw_resetMoshe Shemesh2-2/+26
Functions which can't access MFRL (Management Firmware Reset Level) register, have no use of fw_reset structures or events. Remove fw_reset structures allocation and registration for fw reset events notifications for these functions. Having the devlink param enable_remote_dev_reset on functions that don't have this capability is misleading as these functions are not allowed to influence the reset flow. Hence, this patch removes this parameter for such functions. In addition, return not supported on devlink reload action fw_activate for these functions. Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-03-02net/mlx5: Fix fw reporter diagnose outputAya Levin1-1/+1
Restore fw reporter diagnose to print the syndrome even if it is zero. Following the cited commit, in this case (syndrome == 0) command returns no output at all. This fix restores command output in case syndrome is cleared: $ devlink health diagnose pci/0000:82:00.0 reporter fw Syndrome: 0 Fixes: d17f98bf7cc9 ("net/mlx5: devlink health: use retained error fmsg API") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-03-02net/mlx5: E-switch, Change flow rule destination checkingJianbo Liu1-9/+14
The checking in the cited commit is not accurate. In the common case, VF destination is internal, and uplink destination is external. However, uplink destination with packet reformat is considered as internal because firmware uses LB+hairpin to support it. Update the checking so header rewrite rules with both internal and external destinations are not allowed. Fixes: e0e22d59b47a ("net/mlx5: E-switch, Add checking for flow rule destinations") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-03-02Revert "net/mlx5e: Check the number of elements before walk TC rhashtable"Saeed Mahameed1-1/+1
This reverts commit 4e25b661f484df54b6751b65f9ea2434a3b67539. This Commit was mistakenly applied by pulling the wrong tag, remove it. Fixes: 4e25b661f484 ("net/mlx5e: Check the number of elements before walk TC rhashtable") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-03-02Revert "net/mlx5: Block entering switchdev mode with ns inconsistency"Gavin Li1-23/+0
This reverts commit 662404b24a4c4d839839ed25e3097571f5938b9b. The revert is required due to the suspicion it is not good for anything and cause crash. Fixes: 662404b24a4c ("net/mlx5e: Block entering switchdev mode with ns inconsistency") Signed-off-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-02-27thermal: core: Eliminate writable trip points masksRafael J. Wysocki1-3/+0
All of the thermal_zone_device_register_with_trips() callers pass zero writable trip points masks to it, so drop the mask argument from that function and update all of its callers accordingly. This also removes the artificial trip points per zone limit of 32, related to using writable trip points masks. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-02-27mlxsw: core_thermal: Set THERMAL_TRIP_FLAG_RW_TEMP directlyRafael J. Wysocki1-6/+9
It is now possible to flag trip points with THERMAL_TRIP_FLAG_RW_TEMP to allow their temperature to be set from user space via sysfs instead of using a nonzero writable trips mask during thermal zone registration, so make the mlxsw code do that. No intentional functional impact. Note that this change is requisite for dropping the mask argument from thermal_zone_device_register_with_trips() going forward. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/dev.c 9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()") 723de3ebef03 ("net: free altname using an RCU callback") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.") drivers/net/ethernet/renesas/ravb_main.c ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path" ) c2da9408579d ("ravb: Add Rx checksum offload support for GbEth") net/mptcp/protocol.c bdd70eb68913 ("mptcp: drop the push_pending field") 28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-13net/mlx5e: link NAPI instances to queues and IRQsJoe Damato2-1/+11
Make mlx5 compatible with the newly added netlink queue GET APIs. Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240209202312.30181-1-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-09net/mlx5: DPLL, Fix possible use after free after delayed work timer triggersJiri Pirko1-1/+1
I managed to hit following use after free warning recently: [ 2169.711665] ================================================================== [ 2169.714009] BUG: KASAN: slab-use-after-free in __run_timers.part.0+0x179/0x4c0 [ 2169.716293] Write of size 8 at addr ffff88812b326a70 by task swapper/4/0 [ 2169.719022] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 6.8.0-rc2jiri+ #2 [ 2169.720974] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2169.722457] Call Trace: [ 2169.722756] <IRQ> [ 2169.723024] dump_stack_lvl+0x58/0xb0 [ 2169.723417] print_report+0xc5/0x630 [ 2169.723807] ? __virt_addr_valid+0x126/0x2b0 [ 2169.724268] kasan_report+0xbe/0xf0 [ 2169.724667] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725116] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725570] __run_timers.part.0+0x179/0x4c0 [ 2169.726003] ? call_timer_fn+0x320/0x320 [ 2169.726404] ? lock_downgrade+0x3a0/0x3a0 [ 2169.726820] ? kvm_clock_get_cycles+0x14/0x20 [ 2169.727257] ? ktime_get+0x92/0x150 [ 2169.727630] ? lapic_next_deadline+0x35/0x60 [ 2169.728069] run_timer_softirq+0x40/0x80 [ 2169.728475] __do_softirq+0x1a1/0x509 [ 2169.728866] irq_exit_rcu+0x95/0xc0 [ 2169.729241] sysvec_apic_timer_interrupt+0x6b/0x80 [ 2169.729718] </IRQ> [ 2169.729993] <TASK> [ 2169.730259] asm_sysvec_apic_timer_interrupt+0x16/0x20 [ 2169.730755] RIP: 0010:default_idle+0x13/0x20 [ 2169.731190] Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 9a 7f 1f 02 85 c0 7e 07 0f 00 2d cf 69 43 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 c0 93 04 00 [ 2169.732759] RSP: 0018:ffff888100dbfe10 EFLAGS: 00000242 [ 2169.733264] RAX: 0000000000000001 RBX: ffff888100d9c200 RCX: ffffffff8241bd62 [ 2169.733925] RDX: ffffed109a848b15 RSI: 0000000000000004 RDI: ffffffff8127ac55 [ 2169.734566] RBP: 0000000000000004 R08: 0000000000000000 R09: ffffed109a848b14 [ 2169.735200] R10: ffff8884d42458a3 R11: 000000000000ba7e R12: ffffffff83d7d3a0 [ 2169.735835] R13: 1ffff110201b7fc6 R14: 0000000000000000 R15: ffff888100d9c200 [ 2169.736478] ? ct_kernel_exit.constprop.0+0xa2/0xc0 [ 2169.736954] ? do_idle+0x285/0x290 [ 2169.737323] default_idle_call+0x63/0x90 [ 2169.737730] do_idle+0x285/0x290 [ 2169.738089] ? arch_cpu_idle_exit+0x30/0x30 [ 2169.738511] ? mark_held_locks+0x1a/0x80 [ 2169.738917] ? lockdep_hardirqs_on_prepare+0x12e/0x200 [ 2169.739417] cpu_startup_entry+0x30/0x40 [ 2169.739825] start_secondary+0x19a/0x1c0 [ 2169.740229] ? set_cpu_sibling_map+0xbd0/0xbd0 [ 2169.740673] secondary_startup_64_no_verify+0x15d/0x16b [ 2169.741179] </TASK> [ 2169.741686] Allocated by task 1098: [ 2169.742058] kasan_save_stack+0x1c/0x40 [ 2169.742456] kasan_save_track+0x10/0x30 [ 2169.742852] __kasan_kmalloc+0x83/0x90 [ 2169.743246] mlx5_dpll_probe+0xf5/0x3c0 [mlx5_dpll] [ 2169.743730] auxiliary_bus_probe+0x62/0xb0 [ 2169.744148] really_probe+0x127/0x590 [ 2169.744534] __driver_probe_device+0xd2/0x200 [ 2169.744973] device_driver_attach+0x6b/0xf0 [ 2169.745402] bind_store+0x90/0xe0 [ 2169.745761] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.746210] vfs_write+0x41f/0x790 [ 2169.746579] ksys_write+0xc7/0x160 [ 2169.746947] do_syscall_64+0x6f/0x140 [ 2169.747333] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.748049] Freed by task 1220: [ 2169.748393] kasan_save_stack+0x1c/0x40 [ 2169.748789] kasan_save_track+0x10/0x30 [ 2169.749188] kasan_save_free_info+0x3b/0x50 [ 2169.749621] poison_slab_object+0x106/0x180 [ 2169.750044] __kasan_slab_free+0x14/0x50 [ 2169.750451] kfree+0x118/0x330 [ 2169.750792] mlx5_dpll_remove+0xf5/0x110 [mlx5_dpll] [ 2169.751271] auxiliary_bus_remove+0x2e/0x40 [ 2169.751694] device_release_driver_internal+0x24b/0x2e0 [ 2169.752191] unbind_store+0xa6/0xb0 [ 2169.752563] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.753004] vfs_write+0x41f/0x790 [ 2169.753381] ksys_write+0xc7/0x160 [ 2169.753750] do_syscall_64+0x6f/0x140 [ 2169.754132] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.754847] Last potentially related work creation: [ 2169.755315] kasan_save_stack+0x1c/0x40 [ 2169.755709] __kasan_record_aux_stack+0x9b/0xf0 [ 2169.756165] __queue_work+0x382/0x8f0 [ 2169.756552] call_timer_fn+0x126/0x320 [ 2169.756941] __run_timers.part.0+0x2ea/0x4c0 [ 2169.757376] run_timer_softirq+0x40/0x80 [ 2169.757782] __do_softirq+0x1a1/0x509 [ 2169.758387] Second to last potentially related work creation: [ 2169.758924] kasan_save_stack+0x1c/0x40 [ 2169.759322] __kasan_record_aux_stack+0x9b/0xf0 [ 2169.759773] __queue_work+0x382/0x8f0 [ 2169.760156] call_timer_fn+0x126/0x320 [ 2169.760550] __run_timers.part.0+0x2ea/0x4c0 [ 2169.760978] run_timer_softirq+0x40/0x80 [ 2169.761381] __do_softirq+0x1a1/0x509 [ 2169.761998] The buggy address belongs to the object at ffff88812b326a00 which belongs to the cache kmalloc-256 of size 256 [ 2169.763061] The buggy address is located 112 bytes inside of freed 256-byte region [ffff88812b326a00, ffff88812b326b00) [ 2169.764346] The buggy address belongs to the physical page: [ 2169.764866] page:000000000f2b1e89 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12b324 [ 2169.765731] head:000000000f2b1e89 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 2169.766484] anon flags: 0x200000000000840(slab|head|node=0|zone=2) [ 2169.767048] page_type: 0xffffffff() [ 2169.767422] raw: 0200000000000840 ffff888100042b40 0000000000000000 dead000000000001 [ 2169.768183] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 2169.768899] page dumped because: kasan: bad access detected [ 2169.769649] Memory state around the buggy address: [ 2169.770116] ffff88812b326900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.770805] ffff88812b326980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.771485] >ffff88812b326a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2169.772173] ^ [ 2169.772787] ffff88812b326a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2169.773477] ffff88812b326b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.774160] ================================================================== [ 2169.774845] ================================================================== I didn't manage to reproduce it. Though the issue seems to be obvious. There is a chance that the mlx5_dpll_remove() calls cancel_delayed_work() when the work runs and manages to re-arm itself. In that case, after delay timer triggers next attempt to queue it, it works with freed memory. Fix this by using cancel_delayed_work_sync() instead which makes sure that work is done when it returns. Fixes: 496fd0a26bbf ("mlx5: Implement SyncE support using DPLL infrastructure") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240206164328.360313-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08Merge tag 'mlx5-updates-2024-02-01' of ↵Jakub Kicinski15-225/+735
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2024-02-01 1) IPSec global stats for xfrm and mlx5 2) XSK memory improvements for non-linear SKBs 3) Software steering debug dump to use seq_file ops 4) Various code clean-ups * tag 'mlx5-updates-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: XDP, Exclude headroom and tailroom from memory calculations net/mlx5e: XSK, Exclude tailroom from non-linear SKBs memory calculations net/mlx5: DR, Change SWS usage to debug fs seq_file interface net/mlx5: Change missing SyncE capability print to debug net/mlx5: Remove initial segmentation duplicate definitions net/mlx5: Return specific error code for timeout on wait_fw_init net/mlx5: SF, Stop waiting for FW as teardown was called net/mlx5: remove fw reporter dump option for non PF net/mlx5: remove fw_fatal reporter dump option for non PF net/mlx5: Rename mlx5_sf_dev_remove Documentation: Fix counter name of mlx5 vnic reporter net/mlx5e: Delete obsolete IPsec code net/mlx5e: Connect mlx5 IPsec statistics with XFRM core xfrm: get global statistics from the offloaded device xfrm: generalize xdo_dev_state_update_curlft to allow statistics update ==================== Link: https://lore.kernel.org/r/20240206005527.1353368-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-07mlx4: Address spelling errorsSimon Horman11-20/+22
Address spelling errors flagged by codespell. This patch follows-up on an earlier patch by Colin Ian King, which addressed a spelling error in a user-visible log message [1]. This patch includes that change. [1] https://lore.kernel.org/netdev/20231209225135.4055334-1-colin.i.king@gmail.com/ This patch is intended to cover all files under drivers/net/ethernet/mellanox/mlx4 Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20240205-mlx5-codespell-v1-1-63b86dffbb61@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-06net/mlx5e: XDP, Exclude headroom and tailroom from memory calculationsCarolina Jubran1-1/+8
In the case of XDP Multi-Buffer with Striding RQ, an extra page is allocated for the linear part of non-linear SKBs. Including headroom and tailroom in the calculation may result in an unnecessary increase in the amount of memory allocated. This could be critical, particularly for large MTUs (e.g. 7975B) and large RQ sizes (e.g. 8192). In this case, the requested page pool size is 64K, but 32K would be sufficient. This causes a failure due to exceeding the page pool size limit of 32K. Exclude headroom and tailroom from SKB size calculations to reduce page pool size. Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-02-06net/mlx5e: XSK, Exclude tailroom from non-linear SKBs memory calculationsCarolina Jubran1-4/+11
Packet data buffers lack reserved headroom or tailroom, and SKBs are allocated on a side memory when needed. Exclude the tailroom from the SKB size calculations. Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-02-06net/mlx5: DR, Change SWS usage to debug fs seq_file interfaceHamdan Igbaria2-134/+620
In current SWS debug dump mechanism we implement the seq_file interface, but we only implement the 'show' callback to dump the whole steering DB with a single call to this callback. However, for large data size the seq_printf function will fail to allocate a buffer with the adequate capacity to hold such data. This patch solves this problem by utilizing the seq_file interface mechanism in the following way: - when the user triggers a dump procedure, we will allocate a list of buffers that hold the whole data dump (in the start callback) - using the start, next, show and stop callbacks of the seq_file API we iterate through the list and dump the whole data Signed-off-by: Hamdan Igbaria <hamdani@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-02-06net/mlx5: Change missing SyncE capability print to debugGal Pressman1-1/+1
Lack of SyncE capability should not emit a warning, change the print to debug level. Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-02-06net/mlx5: Remove initial segmentation duplicate definitionsGal Pressman3-20/+13
Device definitions belong in mlx5_ifc, remove the duplicates in mlx5_core.h. Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-02-06net/mlx5: Return specific error code for timeout on wait_fw_initMoshe Shemesh1-19/+19
The function wait_fw_init() returns same error code either if it breaks waiting due to timeout or other reason. Thus, the function callers print error message on timeout without checking error type. Return different error code for different failure reason and print error message accordingly on wait_fw_init(). Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-02-06net/mlx5: SF, Stop waiting for FW as teardown was calledMoshe Shemesh1-8/+13
When PF/VF teardown is called the driver sets the flag MLX5_BREAK_FW_WAIT to stop waiting for FW loading and initializing. Same should be applied to SF driver teardown to cut waiting time. On mlx5_sf_dev_remove() set the flag before draining health WQ as recovery flow may also wait for FW reloading while it is not relevant anymore. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-02-06net/mlx5: remove fw reporter dump option for non PFMoshe Shemesh1-3/+10
In case function is not a Physical Function it is not allowed to get FW core dump, so if tried it will fail the fw health reporter dump option. Instead of failing, remove the option of fw_fatal health reporter dump for such function. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-02-06net/mlx5: remove fw_fatal reporter dump option for non PFMoshe Shemesh1-2/+10
In case function is not a Physical Function it is not allowed to collect crdump, so if tried it will fail the fw_fatal health reporter dump option. Instead of failing on permission, remove the option of fw_fatal health reporter dump for such function. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-02-06net/mlx5: Rename mlx5_sf_dev_removeMoshe Shemesh1-4/+5
Mlx5 has two functions with the same name mlx5_sf_dev_remove. Both are static, in different files, so no compilation or logical issue, but it makes it hard to follow the code and some traces even can get both as one leads to the other [1]. Rename one to mlx5_sf_dev_remove_aux() as it actually removes the auxiliary device of the SF. [1] mlx5_sf_dev_remove+0x2a/0x70 [mlx5_core] auxiliary_bus_remove+0x18/0x30 device_release_driver_internal+0x199/0x200 bus_remove_device+0xd7/0x140 device_del+0x153/0x3d0 ? process_one_work+0x16a/0x4b0 mlx5_sf_dev_remove+0x2e/0x90 [mlx5_core] mlx5_sf_dev_table_destroy+0xa0/0x100 [mlx5_core] Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-02-06net/mlx5e: Delete obsolete IPsec codeLeon Romanovsky4-26/+2
After addition of HW managed counters and implementation drop in flow steering logic, the code in driver which checks syndrome is not reachable anymore. Let's delete it. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-02-06net/mlx5e: Connect mlx5 IPsec statistics with XFRM coreLeon Romanovsky1-2/+20
Fill integrity, replay and bad trailer counters. As an example, after simulating replay window attack with 5 packets: [leonro@c ~]$ grep XfrmInStateSeqError /proc/net/xfrm_stat XfrmInStateSeqError 5 [leonro@c ~]$ sudo ip -s x s <...> stats: replay-window 0 replay 5 failed 0 Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-02-06xfrm: get global statistics from the offloaded deviceLeon Romanovsky1-1/+2
Iterate over all SAs in order to fill global IPsec statistics. Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-02-06xfrm: generalize xdo_dev_state_update_curlft to allow statistics updateLeon Romanovsky1-3/+4
In order to allow drivers to fill all statistics, change the name of xdo_dev_state_update_curlft to be xdo_dev_state_update_stats. Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-02-01net/mlx5: DPLL, Implement lock status error valueJiri Pirko1-0/+23
Fill-up the lock status error value properly. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-01dpll: extend lock_status_get() op by status error and expose to userJiri Pirko1-4/+5
Pass additional argunent status_error over lock_status_get() so drivers can fill it up. In case they do, expose the value over previously introduced attribute to user. Do it only in case the current lock_status is either "unlocked" or "holdover". Signed-off-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-31mlxsw: remove I2C_CLASS_HWMON from drivers w/o detect and address_listHeiner Kallweit1-1/+0
Class-based I2C probing requires detect() and address_list to be set in the I2C client driver, see checks in i2c_detect(). It's misleading to declare I2C_CLASS_HWMON support if this precondition isn't met. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/77b5ab8e-20f2-4310-bd89-57db99e2f53b@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-30mlxsw: Use refcount_t for reference countingAmit Cohen6-36/+40
mlxsw driver uses 'unsigned int' for reference counters in several structures. Instead, use refcount_t type which allows us to catch overflow and underflow issues. Change the type of the counters and use the appropriate API. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30mlxsw: spectrum: Refactor LAG create and destroy codeAmit Cohen1-43/+73
mlxsw_sp stores an array of LAGs. When a port joins a LAG, in case that this LAG is already in use, we only have to increase the reference counter. Otherwise, we have to search for an unused LAG ID and configure it in hardware. When a port leaves a LAG, we have to destroy it only for the last user. This code can be simplified, for such requirements we usually add get() and put() functions which create and destroy the object. Add mlxsw_sp_lag_{get,put}() and use them. These functions take care of the reference counter and hardware configuration if needed. Change the reference counter to refcount_t type which catches overflow and underflow issues. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30mlxsw: spectrum: Search for free LAD ID onceAmit Cohen1-9/+6
Currently, the function mlxsw_sp_lag_index_get() is called twice - first as part of NETDEV_PRECHANGEUPPER event and later as part of NETDEV_CHANGEUPPER. This function will be changed in the next patch. To simplify the code, call it only once as part of NETDEV_CHANGEUPPER event and set an error message using 'extack' in case of failure. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30mlxsw: spectrum: Query max_lag onceAmit Cohen2-25/+8
The maximum number of LAGs is queried from core several times. It is used to allocate LAG array, and then to iterate over it. In addition, it is used for PGT initialization. To simplify the code, instead of querying it several times, store the value as part of 'mlxsw_sp' and use it. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30mlxsw: spectrum: Remove mlxsw_sp_lag_get()Amit Cohen1-9/+3
A next patch will add mlxsw_sp_lag_{get,put}() functions to handle LAG reference counting and create/destroy it only for first user/last user. Remove mlxsw_sp_lag_get() function and access LAG array directly. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30mlxsw: spectrum: Change mlxsw_sp_upper to LAG structureAmit Cohen2-16/+17
The structure mlxsw_sp_upper is used only as LAG. Rename it to mlxsw_sp_lag and move it to spectrum.c file, as it is used only there. Move the function mlxsw_sp_lag_get() with the structure. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-24net/mlx5e: fix a potential double-free in fs_any_create_groupsDinghao Liu1-0/+1
When kcalloc() for ft->g succeeds but kvzalloc() for in fails, fs_any_create_groups() will free ft->g. However, its caller fs_any_create_table() will free ft->g again through calling mlx5e_destroy_flow_table(), which will lead to a double-free. Fix this by setting ft->g to NULL in fs_any_create_groups(). Fixes: 0f575c20bf06 ("net/mlx5e: Introduce Flow Steering ANY API") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: fix a double-free in arfs_create_groupsZhipeng Lu1-11/+15
When `in` allocated by kvzalloc fails, arfs_create_groups will free ft->g and return an error. However, arfs_create_table, the only caller of arfs_create_groups, will hold this error and call to mlx5e_destroy_flow_table, in which the ft->g will be freed again. Fixes: 1cabe6b0965e ("net/mlx5e: Create aRFS flow tables") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: Ignore IPsec replay window values on sender sideLeon Romanovsky1-2/+8
XFRM stack doesn't prevent from users to configure replay window in TX side and strongswan sets replay_window to be 1. It causes to failures in validation logic when trying to offload the SA. Replay window is not relevant in TX side and should be ignored. Fixes: cded6d80129b ("net/mlx5e: Store replay window in XFRM attributes") Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: Allow software parsing when IPsec crypto is enabledLeon Romanovsky1-2/+2
All ConnectX devices have software parsing capability enabled, but it is more correct to set allow_swp only if capability exists, which for IPsec means that crypto offload is supported. Fixes: 2451da081a34 ("net/mlx5: Unify device IPsec capabilities check") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: Use mlx5 device constant for selecting CQ period mode for ASORahul Rameshbabu1-1/+1
mlx5 devices have specific constants for choosing the CQ period mode. These constants do not have to match the constants used by the kernel software API for DIM period mode selection. Fixes: cdd04f4d4d71 ("net/mlx5: Add support to create SQ and CQ for ASO") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: DR, Can't go to uplink vport on RX ruleYevgeny Kliteynik1-5/+11
Go-To-Vport action on RX is not allowed when the vport is uplink. In such case, the packet should be dropped. Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Erez Shitrit <erezsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: DR, Use the right GVMI number for drop actionYevgeny Kliteynik1-0/+1
When FW provides ICM addresses for drop RX/TX, the provided capability is 64 bits that contain its GVMI as well as the ICM address itself. In case of TX DROP this GVMI is different from the GVMI that the domain is operating on. This patch fixes the action to use these GVMI IDs, as provided by FW. Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: Bridge, fix multicast packets sent to uplinkMoshe Shemesh2-0/+5
To enable multicast packets which are offloaded in bridge multicast offload mode to be sent also to uplink, FTE bit uplink_hairpin_en should be set. Add this bit to FTE for the bridge multicast offload rules. Fixes: 18c2916cee12 ("net/mlx5: Bridge, snoop igmp/mld packets") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: Fix a WARN upon a callback command failureYishai Hadas1-2/+3
The below WARN [1] is reported once a callback command failed. As a callback runs under an interrupt context, needs to use the IRQ save/restore variant. [1] DEBUG_LOCKS_WARN_ON(lockdep_hardirq_context()) WARNING: CPU: 15 PID: 0 at kernel/locking/lockdep.c:4353 lockdep_hardirqs_on_prepare+0x11b/0x180 Modules linked in: vhost_net vhost tap mlx5_vfio_pci vfio_pci vfio_pci_core vfio_iommu_type1 vfio mlx5_vdpa vringh vhost_iotlb vdpa nfnetlink_cttimeout openvswitch nsh ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle xt_conntrackxt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core CPU: 15 PID: 0 Comm: swapper/15 Tainted: G W 6.7.0-rc4+ #1587 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:lockdep_hardirqs_on_prepare+0x11b/0x180 Code: 00 5b c3 c3 e8 e6 0d 58 00 85 c0 74 d6 8b 15 f0 c3 76 01 85 d2 75 cc 48 c7 c6 04 a5 3b 82 48 c7 c7 f1 e9 39 82 e8 95 12 f9 ff <0f> 0b 5b c3 e8 bc 0d 58 00 85 c0 74 ac 8b 3d c6 c3 76 01 85 ff 75 RSP: 0018:ffffc900003ecd18 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027 RDX: 0000000000000000 RSI: ffff88885fbdb880 RDI: ffff88885fbdb888 RBP: 00000000ffffff87 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 284e4f5f4e524157 R12: 00000000002c9aa1 R13: ffff88810aace980 R14: ffff88810aace9b8 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff88885fbc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f731436f4c8 CR3: 000000010aae6001 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? __warn+0x81/0x170 ? lockdep_hardirqs_on_prepare+0x11b/0x180 ? report_bug+0xf8/0x1c0 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? lockdep_hardirqs_on_prepare+0x11b/0x180 ? lockdep_hardirqs_on_prepare+0x11b/0x180 trace_hardirqs_on+0x4a/0xa0 raw_spin_unlock_irq+0x24/0x30 cmd_status_err+0xc0/0x1a0 [mlx5_core] cmd_status_err+0x1a0/0x1a0 [mlx5_core] mlx5_cmd_exec_cb_handler+0x24/0x40 [mlx5_core] mlx5_cmd_comp_handler+0x129/0x4b0 [mlx5_core] cmd_comp_notifier+0x1a/0x20 [mlx5_core] notifier_call_chain+0x3e/0xe0 atomic_notifier_call_chain+0x5f/0x130 mlx5_eq_async_int+0xe7/0x200 [mlx5_core] notifier_call_chain+0x3e/0xe0 atomic_notifier_call_chain+0x5f/0x130 irq_int_handler+0x11/0x20 [mlx5_core] __handle_irq_event_percpu+0x99/0x220 ? tick_irq_enter+0x5d/0x80 handle_irq_event_percpu+0xf/0x40 handle_irq_event+0x3a/0x60 handle_edge_irq+0xa2/0x1c0 __common_interrupt+0x55/0x140 common_interrupt+0x7d/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0x13/0x20 Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 ea 08 25 01 85 c0 7e 07 0f 00 2d 7f b0 26 00 fb f4 <fa> c3 90 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 80 d0 02 00 RSP: 0018:ffffc9000010fec8 EFLAGS: 00000242 RAX: 0000000000000001 RBX: 000000000000000f RCX: 4000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff811c410c RBP: ffffffff829478c0 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? do_idle+0x1ec/0x210 default_idle_call+0x6c/0x90 do_idle+0x1ec/0x210 cpu_startup_entry+0x26/0x30 start_secondary+0x11b/0x150 secondary_startup_64_no_verify+0x165/0x16b </TASK> irq event stamp: 833284 hardirqs last enabled at (833283): [<ffffffff811c410c>] do_idle+0x1ec/0x210 hardirqs last disabled at (833284): [<ffffffff81daf9ef>] common_interrupt+0xf/0xa0 softirqs last enabled at (833224): [<ffffffff81dc199f>] __do_softirq+0x2bf/0x40e softirqs last disabled at (833177): [<ffffffff81178ddf>] irq_exit_rcu+0x7f/0xa0 Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs") Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: Fix peer flow lists handlingVlad Buslov1-1/+2
The cited change refactored mlx5e_tc_del_fdb_peer_flow() to only clear DUP flag when list of peer flows has become empty. However, if any concurrent user holds a reference to a peer flow (for example, the neighbor update workqueue task is updating peer flow's parent encap entry concurrently), then the flow will not be removed from the peer list and, consecutively, DUP flag will remain set. Since mlx5e_tc_del_fdb_peers_flow() calls mlx5e_tc_del_fdb_peer_flow() for every possible peer index the algorithm will try to remove the flow from eswitch instances that it has never peered with causing either NULL pointer dereference when trying to remove the flow peer list head of peer_index that was never initialized or a warning if the list debug config is enabled[0]. Fix the issue by always removing the peer flow from the list even when not releasing the last reference to it. [0]: [ 3102.985806] ------------[ cut here ]------------ [ 3102.986223] list_del corruption, ffff888139110698->next is NULL [ 3102.986757] WARNING: CPU: 2 PID: 22109 at lib/list_debug.c:53 __list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.987561] Modules linked in: act_ct nf_flow_table bonding act_tunnel_key act_mirred act_skbedit vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcg ss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core [last unloaded: bonding] [ 3102.991113] CPU: 2 PID: 22109 Comm: revalidator28 Not tainted 6.6.0-rc6+ #3 [ 3102.991695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 3102.992605] RIP: 0010:__list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.993122] Code: 39 c2 74 56 48 8b 32 48 39 fe 75 62 48 8b 51 08 48 39 f2 75 73 b8 01 00 00 00 c3 48 89 fe 48 c7 c7 48 fd 0a 82 e8 41 0b ad ff <0f> 0b 31 c0 c3 48 89 fe 48 c7 c7 70 fd 0a 82 e8 2d 0b ad ff 0f 0b [ 3102.994615] RSP: 0018:ffff8881383e7710 EFLAGS: 00010286 [ 3102.995078] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 3102.995670] RDX: 0000000000000001 RSI: ffff88885f89b640 RDI: ffff88885f89b640 [ 3102.997188] DEL flow 00000000be367878 on port 0 [ 3102.998594] RBP: dead000000000122 R08: 0000000000000000 R09: c0000000ffffdfff [ 3102.999604] R10: 0000000000000008 R11: ffff8881383e7598 R12: dead000000000100 [ 3103.000198] R13: 0000000000000002 R14: ffff888139110000 R15: ffff888101901240 [ 3103.000790] FS: 00007f424cde4700(0000) GS:ffff88885f880000(0000) knlGS:0000000000000000 [ 3103.001486] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3103.001986] CR2: 00007fd42e8dcb70 CR3: 000000011e68a003 CR4: 0000000000370ea0 [ 3103.002596] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3103.003190] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3103.003787] Call Trace: [ 3103.004055] <TASK> [ 3103.004297] ? __warn+0x7d/0x130 [ 3103.004623] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.005094] ? report_bug+0xf1/0x1c0 [ 3103.005439] ? console_unlock+0x4a/0xd0 [ 3103.005806] ? handle_bug+0x3f/0x70 [ 3103.006149] ? exc_invalid_op+0x13/0x60 [ 3103.006531] ? asm_exc_invalid_op+0x16/0x20 [ 3103.007430] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.007910] mlx5e_tc_del_fdb_peers_flow+0xcf/0x240 [mlx5_core] [ 3103.008463] mlx5e_tc_del_flow+0x46/0x270 [mlx5_core] [ 3103.008944] mlx5e_flow_put+0x26/0x50 [mlx5_core] [ 3103.009401] mlx5e_delete_flower+0x25f/0x380 [mlx5_core] [ 3103.009901] tc_setup_cb_destroy+0xab/0x180 [ 3103.010292] fl_hw_destroy_filter+0x99/0xc0 [cls_flower] [ 3103.010779] __fl_delete+0x2d4/0x2f0 [cls_flower] [ 3103.011207] fl_delete+0x36/0x80 [cls_flower] [ 3103.011614] tc_del_tfilter+0x56f/0x750 [ 3103.011982] rtnetlink_rcv_msg+0xff/0x3a0 [ 3103.012362] ? netlink_ack+0x1c7/0x4e0 [ 3103.012719] ? rtnl_calcit.isra.44+0x130/0x130 [ 3103.013134] netlink_rcv_skb+0x54/0x100 [ 3103.013533] netlink_unicast+0x1ca/0x2b0 [ 3103.013902] netlink_sendmsg+0x361/0x4d0 [ 3103.014269] __sock_sendmsg+0x38/0x60 [ 3103.014643] ____sys_sendmsg+0x1f2/0x200 [ 3103.015018] ? copy_msghdr_from_user+0x72/0xa0 [ 3103.015265] ___sys_sendmsg+0x87/0xd0 [ 3103.016608] ? copy_msghdr_from_user+0x72/0xa0 [ 3103.017014] ? ___sys_recvmsg+0x9b/0xd0 [ 3103.017381] ? ttwu_do_activate.isra.137+0x58/0x180 [ 3103.017821] ? wake_up_q+0x49/0x90 [ 3103.018157] ? futex_wake+0x137/0x160 [ 3103.018521] ? __sys_sendmsg+0x51/0x90 [ 3103.018882] __sys_sendmsg+0x51/0x90 [ 3103.019230] ? exit_to_user_mode_prepare+0x56/0x130 [ 3103.019670] do_syscall_64+0x3c/0x80 [ 3103.020017] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 3103.020469] RIP: 0033:0x7f4254811ef4 [ 3103.020816] Code: 89 f3 48 83 ec 10 48 89 7c 24 08 48 89 14 24 e8 42 eb ff ff 48 8b 14 24 41 89 c0 48 89 de 48 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 48 89 04 24 e8 78 eb ff ff 48 8b [ 3103.022290] RSP: 002b:00007f424cdd9480 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 3103.022970] RAX: ffffffffffffffda RBX: 00007f424cdd9510 RCX: 00007f4254811ef4 [ 3103.023564] RDX: 0000000000000000 RSI: 00007f424cdd9510 RDI: 0000000000000012 [ 3103.024158] RBP: 00007f424cdda238 R08: 0000000000000000 R09: 00007f41d801a4b0 [ 3103.024748] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000001 [ 3103.025341] R13: 00007f424cdd9510 R14: 00007f424cdda240 R15: 00007f424cdd99a0 [ 3103.025931] </TASK> [ 3103.026182] ---[ end trace 0000000000000000 ]--- [ 3103.027033] ------------[ cut here ]------------ Fixes: 9be6c21fdcf8 ("net/mlx5e: Handle offloads flows per peer") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: Fix inconsistent hairpin RQT sizesTariq Toukan1-1/+1
The processing of traffic in hairpin queues occurs in HW/FW and does not involve the cpus, hence the upper bound on max num channels does not apply to them. Using this bound for the hairpin RQT max_table_size is wrong. It could be too small, and cause the error below [1]. As the RQT size provided on init does not get modified later, use the same value for both actual and max table sizes. [1] mlx5_core 0000:08:00.1: mlx5_cmd_out_err:805:(pid 1200): CREATE_RQT(0x916) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x538faf), err(-22) Fixes: 74a8dadac17e ("net/mlx5e: Preparations for supporting larger number of channels") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: Fix operation precedence bug in port timestamping napi_poll contextRahul Rameshbabu1-1/+1
Indirection (*) is of lower precedence than postfix increment (++). Logic in napi_poll context would cause an out-of-bound read by first increment the pointer address by byte address space and then dereference the value. Rather, the intended logic was to dereference first and then increment the underlying value. Fixes: 92214be5979c ("net/mlx5e: Update doorbell for port timestamping CQ before the software counter") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: Fix query of sd_group fieldTariq Toukan1-0/+21
The sd_group field moved in the HW spec from the MPIR register to the vport context. Align the query accordingly. Fixes: f5e956329960 ("net/mlx5: Expose Management PCIe Index Register (MPIR)") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-05 05:38:41 +0300