summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mellanox
AgeCommit message (Collapse)AuthorFilesLines
6 daysmlxsw: core_linecards: Fix double memory deallocation in case of invalid INI ↵Aleksandr Mishin1-0/+1
file In case of invalid INI file mlxsw_linecard_types_init() deallocates memory but doesn't reset pointer to NULL and returns 0. In case of any error occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init() calls mlxsw_linecard_types_fini() which performs memory deallocation again. Add pointer reset to NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: b217127e5e4e ("mlxsw: core_linecards: Add line card objects and implement provisioning") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://patch.msgid.link/20240703203251.8871-1-amishin@t-argos.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
12 daysnet/mlx5e: Approximate IPsec per-SA payload data bytes countLeon Romanovsky1-1/+13
ConnectX devices lack ability to count payload data byte size which is needed for SA to return to libreswan for rekeying. As a solution let's approximate that by decreasing headers size from total size counted by flow steering. The calculation doesn't take into account any other headers which can be in the packet (e.g. IP extensions). Fixes: 5a6cddb89b51 ("net/mlx5e: Update IPsec per SA packets/bytes count") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
12 daysnet/mlx5e: Present succeeded IPsec SA bytes and packetLeon Romanovsky1-13/+23
IPsec SA statistics presents successfully decrypted and encrypted packet and bytes, and not total handled by this SA. So update the calculation logic to take into account failures. Fixes: 6fb7f9408779 ("net/mlx5e: Connect mlx5 IPsec statistics with XFRM core") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
12 daysnet/mlx5e: Add mqprio_rl cleanup and free in mlx5e_priv_cleanup()Jianbo Liu1-0/+5
In the cited commit, mqprio_rl cleanup and free are mistakenly removed in mlx5e_priv_cleanup(), and it causes the leakage of host memory and firmware SCHEDULING_ELEMENT objects while changing eswitch mode. So, add them back. Fixes: 0bb7228f7096 ("net/mlx5e: Fix mqprio_rl handling on devlink reload") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
12 daysnet/mlx5: E-switch, Create ingress ACL when neededChris Mi1-8/+29
Currently, ingress acl is used for three features. It is created only when vport metadata match and prio tag are enabled. But active-backup lag mode also uses it. It is independent of vport metadata match and prio tag. And vport metadata match can be disabled using the following devlink command: # devlink dev param set pci/0000:08:00.0 name esw_port_metadata \ value false cmode runtime If ingress acl is not created, will hit panic when creating drop rule for active-backup lag mode. If always create it, there will be about 5% performance degradation. Fix it by creating ingress acl when needed. If esw_port_metadata is true, ingress acl exists, then create drop rule using existing ingress acl. If esw_port_metadata is false, create ingress acl and then create drop rule. Fixes: 1749c4c51c16 ("net/mlx5: E-switch, add drop rule support to ingress ACL") Signed-off-by: Chris Mi <cmi@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
12 daysnet/mlx5: Use max_num_eqs_24b when setting max_io_eqsDaniel Jurgens1-5/+17
Due a bug in the device max_num_eqs doesn't always reflect a written value. As a result, setting max_io_eqs may not work but appear successful. Instead write max_num_eqs_24b, which reflects correct value. Fixes: 93197c7c509d ("mlx5/core: Support max_io_eqs for a function") Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
12 daysnet/mlx5: Use max_num_eqs_24b capability if setDaniel Jurgens3-6/+12
A new capability with more bits is added. If it's set use that value as the maximum number of EQs available. This cap is also writable by the vhca_resource_manager to allow limiting the number of EQs available to SFs and VFs. Fixes: 93197c7c509d ("mlx5/core: Support max_io_eqs for a function") Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: William Tu <witu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-21mlxsw: spectrum_buffers: Fix memory corruptions on Spectrum-4 systemsIdo Schimmel1-6/+14
The following two shared buffer operations make use of the Shared Buffer Status Register (SBSR): # devlink sb occupancy snapshot pci/0000:01:00.0 # devlink sb occupancy clearmax pci/0000:01:00.0 The register has two masks of 256 bits to denote on which ingress / egress ports the register should operate on. Spectrum-4 has more than 256 ports, so the register was extended by cited commit with a new 'port_page' field. However, when filling the register's payload, the driver specifies the ports as absolute numbers and not relative to the first port of the port page, resulting in memory corruptions [1]. Fix by specifying the ports relative to the first port of the port page. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0 Read of size 1 at addr ffff8881068cb00f by task devlink/1566 [...] Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0 mlxsw_devlink_sb_occ_snapshot+0x75/0xb0 devlink_nl_sb_occ_snapshot_doit+0x1f9/0x2a0 genl_family_rcv_msg_doit+0x20c/0x300 genl_rcv_msg+0x567/0x800 netlink_rcv_skb+0x170/0x450 genl_rcv+0x2d/0x40 netlink_unicast+0x547/0x830 netlink_sendmsg+0x8d4/0xdb0 __sys_sendto+0x49b/0x510 __x64_sys_sendto+0xe5/0x1c0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] Allocated by task 1: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 copy_verifier_state+0xbc2/0xfb0 do_check_common+0x2c51/0xc7e0 bpf_check+0x5107/0x9960 bpf_prog_load+0xf0e/0x2690 __sys_bpf+0x1a61/0x49d0 __x64_sys_bpf+0x7d/0xc0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x109/0x170 __kasan_slab_free+0x14/0x30 kfree+0xca/0x2b0 free_verifier_state+0xce/0x270 do_check_common+0x4828/0xc7e0 bpf_check+0x5107/0x9960 bpf_prog_load+0xf0e/0x2690 __sys_bpf+0x1a61/0x49d0 __x64_sys_bpf+0x7d/0xc0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: f8538aec88b4 ("mlxsw: Add support for more than 256 ports in SBSR register") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-21mlxsw: pci: Fix driver initialization with Spectrum-4Ido Schimmel2-3/+17
Cited commit added support for a new reset flow ("all reset") which is deeper than the existing reset flow ("software reset") and allows the device's PCI firmware to be upgraded. In the new flow the driver first tells the firmware that "all reset" is required by issuing a new reset command (i.e., MRSR.command=6) and then triggers the reset by having the PCI core issue a secondary bus reset (SBR). However, due to a race condition in the device's firmware the device is not always able to recover from this reset, resulting in initialization failures [1]. New firmware versions include a fix for the bug and advertise it using a new capability bit in the Management Capabilities Mask (MCAM) register. Avoid initialization failures by reading the new capability bit and triggering the new reset flow only if the bit is set. If the bit is not set, trigger a normal PCI hot reset by skipping the call to the Management Reset and Shutdown Register (MRSR). Normal PCI hot reset is weaker than "all reset", but it results in a fully operational driver and allows users to flash a new firmware, if they want to. [1] mlxsw_spectrum4 0000:01:00.0: not ready 1023ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 2047ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 4095ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 8191ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 16383ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 32767ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 65535ms after bus reset; giving up mlxsw_spectrum4 0000:01:00.0: PCI function reset failed with -25 mlxsw_spectrum4 0000:01:00.0: cannot register bus device mlxsw_spectrum4: probe of 0000:01:00.0 failed with error -25 Fixes: f257c73e5356 ("mlxsw: pci: Add support for new reset flow") Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Maksym Yaremchuk <maksymy@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-10net/mlx5e: Fix features validation check for tunneled UDP (non-VXLAN) packetsGal Pressman1-2/+1
Move the vxlan_features_check() call to after we verified the packet is a tunneled VXLAN packet. Without this, tunneled UDP non-VXLAN packets (for ex. GENENVE) might wrongly not get offloaded. In some cases, it worked by chance as GENEVE header is the same size as VXLAN, but it is obviously incorrect. Fixes: e3cfc7e6b7bd ("net/mlx5e: TX, Add geneve tunnel stateless offload support") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05net/mlx5: Fix tainted pointer delete is case of flow rules creation failAleksandr Mishin1-2/+6
In case of flow rule creation fail in mlx5_lag_create_port_sel_table(), instead of previously created rules, the tainted pointer is deleted deveral times. Fix this bug by using correct flow rules pointers. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 352899f384d4 ("net/mlx5: Lag, use buckets in hash mode") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240604100552.25201-1-amishin@t-argos.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-05net/mlx5: Always stop health timer during driver removalShay Drory1-0/+3
Currently, if teardown_hca fails to execute during driver removal, mlx5 does not stop the health timer. Afterwards, mlx5 continue with driver teardown. This may lead to a UAF bug, which results in page fault Oops[1], since the health timer invokes after resources were freed. Hence, stop the health monitor even if teardown_hca fails. [1] mlx5_core 0000:18:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: cleanup mlx5_core 0000:18:00.0: wait_func:1155:(pid 1967079): TEARDOWN_HCA(0x103) timeout. Will cause a leak of a command resource mlx5_core 0000:18:00.0: mlx5_function_close:1288:(pid 1967079): tear_down_hca failed, skip cleanup BUG: unable to handle page fault for address: ffffa26487064230 PGD 100c00067 P4D 100c00067 PUD 100e5a067 PMD 105ed7067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE ------- --- 6.7.0-68.fc38.x86_64 #1 Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 RIP: 0010:ioread32be+0x34/0x60 RSP: 0018:ffffa26480003e58 EFLAGS: 00010292 RAX: ffffa26487064200 RBX: ffff9042d08161a0 RCX: ffff904c108222c0 RDX: 000000010bbf1b80 RSI: ffffffffc055ddb0 RDI: ffffa26487064230 RBP: ffff9042d08161a0 R08: 0000000000000022 R09: ffff904c108222e8 R10: 0000000000000004 R11: 0000000000000441 R12: ffffffffc055ddb0 R13: ffffa26487064200 R14: ffffa26480003f00 R15: ffff904c108222c0 FS: 0000000000000000(0000) GS:ffff904c10800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa26487064230 CR3: 00000002c4420006 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x175/0x180 ? asm_exc_page_fault+0x26/0x30 ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? ioread32be+0x34/0x60 mlx5_health_check_fatal_sensors+0x20/0x100 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] poll_health+0x42/0x230 [mlx5_core] ? __next_timer_interrupt+0xbc/0x110 ? __pfx_poll_health+0x10/0x10 [mlx5_core] call_timer_fn+0x21/0x130 ? __pfx_poll_health+0x10/0x10 [mlx5_core] __run_timers+0x222/0x2c0 run_timer_softirq+0x1d/0x40 __do_softirq+0xc9/0x2c8 __irq_exit_rcu+0xa6/0xc0 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:cpuidle_enter_state+0xcc/0x440 ? cpuidle_enter_state+0xbd/0x440 cpuidle_enter+0x2d/0x40 do_idle+0x20d/0x270 cpu_startup_entry+0x2a/0x30 rest_init+0xd0/0xd0 arch_call_rest_init+0xe/0x30 start_kernel+0x709/0xa90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0x96/0xa0 secondary_startup_64_no_verify+0x18f/0x19b ---[ end trace 0000000000000000 ]--- Fixes: 9b98d395b85d ("net/mlx5: Start health poll at earlier stage of driver load") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05net/mlx5: Stop waiting for PCI if pci channel is offlineMoshe Shemesh3-0/+16
In case pci channel becomes offline the driver should not wait for PCI reads during health dump and recovery flow. The driver has timeout for each of these loops trying to read PCI, so it would fail anyway. However, in case of recovery waiting till timeout may cause the pci error_detected() callback fail to meet pci_dpc_recovered() wait timeout. Fixes: b3bd076f7501 ("net/mlx5: Report devlink health on FW fatal issues") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-24net/mlx5e: Fix UDP GSO for encapsulated packetsGal Pressman2-2/+12
When the skb is encapsulated, adjust the inner UDP header instead of the outer one, and account for UDP header (instead of TCP) in the inline header size calculation. Fixes: 689adf0d4892 ("net/mlx5e: Add UDP GSO support") Reported-by: Jason Baron <jbaron@akamai.com> Closes: https://lore.kernel.org/netdev/c42961cb-50b9-4a9a-bd43-87fe48d88d29@akamai.com/ Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-24net/mlx5e: Use rx_missed_errors instead of rx_dropped for reporting buffer ↵Carolina Jubran1-1/+1
exhaustion Previously, the driver incorrectly used rx_dropped to report device buffer exhaustion. According to the documentation, rx_dropped should not be used to count packets dropped due to buffer exhaustion, which is the purpose of rx_missed_errors. Use rx_missed_errors as intended for counting packets dropped due to buffer exhaustion. Fixes: 269e6b3af3bf ("net/mlx5e: Report additional error statistics in get stats ndo") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-24net/mlx5e: Do not use ptp structure for tx ts stats when not initializedRahul Rameshbabu1-0/+4
The ptp channel instance is only initialized when ptp traffic is first processed by the driver. This means that there is a window in between when port timestamping is enabled and ptp traffic is sent where the ptp channel instance is not initialized. Accessing statistics during this window will lead to an access violation (NULL + member offset). Check the validity of the instance before attempting to query statistics. BUG: unable to handle page fault for address: 0000000000003524 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 109dfc067 P4D 109dfc067 PUD 1064ef067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 420 Comm: ethtool Not tainted 6.9.0-rc2-rrameshbabu+ #245 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/204 RIP: 0010:mlx5e_stats_ts_get+0x4c/0x130 <snip> Call Trace: <TASK> ? show_regs+0x60/0x70 ? __die+0x24/0x70 ? page_fault_oops+0x15f/0x430 ? do_user_addr_fault+0x2c9/0x5c0 ? exc_page_fault+0x63/0x110 ? asm_exc_page_fault+0x27/0x30 ? mlx5e_stats_ts_get+0x4c/0x130 ? mlx5e_stats_ts_get+0x20/0x130 mlx5e_get_ts_stats+0x15/0x20 <snip> Fixes: 3579032c08c1 ("net/mlx5e: Implement ethtool hardware timestamping statistics") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-24net/mlx5e: Fix IPsec tunnel mode offload feature checkRahul Rameshbabu1-12/+5
Remove faulty check disabling checksum offload and GSO for offload of simple IPsec tunnel L4 traffic. Comment previously describing the deleted code incorrectly claimed the check prevented double tunnel (or three layers of ip headers). Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-24net/mlx5: Use mlx5_ipsec_rx_status_destroy to correctly delete status rulesRahul Rameshbabu1-2/+1
rx_create no longer allocates a modify_hdr instance that needs to be cleaned up. The mlx5_modify_header_dealloc call will lead to a NULL pointer dereference. A leak in the rules also previously occurred since there are now two rules populated related to status. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 109907067 P4D 109907067 PUD 116890067 PMD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 484 Comm: ip Not tainted 6.9.0-rc2-rrameshbabu+ #254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/2014 RIP: 0010:mlx5_modify_header_dealloc+0xd/0x70 <snip> Call Trace: <TASK> ? show_regs+0x60/0x70 ? __die+0x24/0x70 ? page_fault_oops+0x15f/0x430 ? free_to_partial_list.constprop.0+0x79/0x150 ? do_user_addr_fault+0x2c9/0x5c0 ? exc_page_fault+0x63/0x110 ? asm_exc_page_fault+0x27/0x30 ? mlx5_modify_header_dealloc+0xd/0x70 rx_create+0x374/0x590 rx_add_rule+0x3ad/0x500 ? rx_add_rule+0x3ad/0x500 ? mlx5_cmd_exec+0x2c/0x40 ? mlx5_create_ipsec_obj+0xd6/0x200 mlx5e_accel_ipsec_fs_add_rule+0x31/0xf0 mlx5e_xfrm_add_state+0x426/0xc00 <snip> Fixes: 94af50c0a9bb ("net/mlx5e: Unify esw and normal IPsec status table creation/destruction") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-24net/mlx5: Do not query MPIR on embedded CPU functionTariq Toukan1-4/+8
A proper query to MPIR needs to set the correct value in the depth field. On embedded CPU this value is not necessarily zero. As there is no real use case for multi-PF netdev on the embedded CPU of the smart NIC, block this option. This fixes the following failure: ACCESS_REG(0x805) op_mod(0x1) failed, status bad system state(0x4), syndrome (0x685f19), err(-5) Fixes: 678eb448055a ("net/mlx5: SD, Implement basic query and instantiation") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-24net/mlx5: Lag, do bond only if slaves agree on roce stateMaher Sanalla1-2/+10
Currently, the driver does not enforce that lag bond slaves must have matching roce capabilities. Yet, in mlx5_do_bond(), the driver attempts to enable roce on all vports of the bond slaves, causing the following syndrome when one slave has no roce fw support: mlx5_cmd_out_err:809:(pid 25427): MODIFY_NIC_VPORT_CONTEXT(0×755) op_mod(0×0) failed, status bad parameter(0×3), syndrome (0xc1f678), err(-22) Thus, create HW lag only if bond's slaves agree on roce state, either all slaves have roce support resulting in a roce lag bond, or none do, resulting in a raw eth bond. Fixes: 7907f23adc18 ("net/mlx5: Implement RoCE LAG feature") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-23tracing/treewide: Remove second parameter of __assign_str()Steven Rostedt (Google)8-20/+19
With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs Tested-by: Guenter Roeck <linux@roeck-us.net>
2024-05-20Merge tag 'dma-mapping-6.10-2024-05-20' of ↵Linus Torvalds2-3/+3
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - optimize DMA sync calls when they are no-ops (Alexander Lobakin) - fix swiotlb padding for untrusted devices (Michael Kelley) - add documentation for swiotb (Michael Kelley) * tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping: dma: fix DMA sync for drivers not calling dma_set_mask*() xsk: use generic DMA sync shortcut instead of a custom one page_pool: check for DMA sync shortcut earlier page_pool: don't use driver-set flags field directly page_pool: make sure frag API fields don't span between cachelines iommu/dma: avoid expensive indirect calls for sync operations dma: avoid redundant calls for sync operations dma: compile-out DMA sync op calls when not used iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices swiotlb: remove alloc_size argument to swiotlb_tbl_map_single() Documentation/core-api: add swiotlb documentation
2024-05-15Merge tag 'net-next-6.10' of ↵Linus Torvalds70-1072/+2111
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Complete rework of garbage collection of AF_UNIX sockets. AF_UNIX is prone to forming reference count cycles due to fd passing functionality. New method based on Tarjan's Strongly Connected Components algorithm should be both faster and remove a lot of workarounds we accumulated over the years. - Add TCP fraglist GRO support, allowing chaining multiple TCP packets and forwarding them together. Useful for small switches / routers which lack basic checksum offload in some scenarios (e.g. PPPoE). - Support using SMP threads for handling packet backlog i.e. packet processing from software interfaces and old drivers which don't use NAPI. This helps move the processing out of the softirq jumble. - Continue work of converting from rtnl lock to RCU protection. Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link information available via rtnetlink. - Small optimizations from Eric to UDP wake up handling, memory accounting, RPS/RFS implementation, TCP packet sizing etc. - Allow direct page recycling in the bulk API used by XDP, for +2% PPS. - Support peek with an offset on TCP sockets. - Add MPTCP APIs for querying last time packets were received/sent/acked and whether MPTCP "upgrade" succeeded on a TCP socket. - Add intra-node communication shortcut to improve SMC performance. - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver. - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver. - Add reset reasons for tracing what caused a TCP reset to be sent. - Introduce direction attribute for xfrm (IPSec) states. State can be used either for input or output packet processing. Things we sprinkled into general kernel code: - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS(). This required touch-ups and renaming of a few existing users. - Add Endian-dependent __counted_by_{le,be} annotations. - Make building selftests "quieter" by printing summaries like "CC object.o" rather than full commands with all the arguments. Netfilter: - Use GFP_KERNEL to clone elements, to deal better with OOM situations and avoid failures in the .commit step. BPF: - Add eBPF JIT for ARCv2 CPUs. - Support attaching kprobe BPF programs through kprobe_multi link in a session mode, meaning, a BPF program is attached to both function entry and return, the entry program can decide if the return program gets executed and the entry program can share u64 cookie value with return program. "Session mode" is a common use-case for tetragon and bpftrace. - Add the ability to specify and retrieve BPF cookie for raw tracepoint programs in order to ease migration from classic to raw tracepoints. - Add an internal-only BPF per-CPU instruction for resolving per-CPU memory addresses and implement support in x86, ARM64 and RISC-V JITs. This allows inlining functions which need to access per-CPU state. - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various atomics in bpf_arena which can be JITed as a single x86 instruction. Support BPF arena on ARM64. - Add a new bpf_wq API for deferring events and refactor process-context bpf_timer code to keep common code where possible. - Harden the BPF verifier's and/or/xor value tracking. - Introduce crypto kfuncs to let BPF programs call kernel crypto APIs. - Support bpf_tail_call_static() helper for BPF programs with GCC 13. - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF program to have code sections where preemption is disabled. Driver API: - Skip software TC processing completely if all installed rules are marked as HW-only, instead of checking the HW-only flag rule by rule. - Add support for configuring PoE (Power over Ethernet), similar to the already existing support for PoDL (Power over Data Line) config. - Initial bits of a queue control API, for now allowing a single queue to be reset without disturbing packet flow to other queues. - Common (ethtool) statistics for hardware timestamping. Tests and tooling: - Remove the need to create a config file to run the net forwarding tests so that a naive "make run_tests" can exercise them. - Define a method of writing tests which require an external endpoint to communicate with (to send/receive data towards the test machine). Add a few such tests. - Create a shared code library for writing Python tests. Expose the YAML Netlink library from tools/ to the tests for easy Netlink access. - Move netfilter tests under net/, extend them, separate performance tests from correctness tests, and iron out issues found by running them "on every commit". - Refactor BPF selftests to use common network helpers. - Further work filling in YAML definitions of Netlink messages for: nftables, team driver, bonding interfaces, vlan interfaces, VF info, TC u32 mark, TC police action. - Teach Python YAML Netlink to decode attribute policies. - Extend the definition of the "indexed array" construct in the specs to cover arrays of scalars rather than just nests. - Add hyperlinks between definitions in generated Netlink docs. Drivers: - Make sure unsupported flower control flags are rejected by drivers, and make more drivers report errors directly to the application rather than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen). - Ethernet high-speed NICs: - Broadcom (bnxt): - support multiple RSS contexts and steering traffic to them - support XDP metadata - make page pool allocations more NUMA aware - Intel (100G, ice, idpf): - extract datapath code common among Intel drivers into a library - use fewer resources in switchdev by sharing queues with the PF - add PFCP filter support - add Ethernet filter support - use a spinlock instead of HW lock in PTP clock ops - support 5 layer Tx scheduler topology - nVidia/Mellanox: - 800G link modes and 100G SerDes speeds - per-queue IRQ coalescing configuration - Marvell Octeon: - support offloading TC packet mark action - Ethernet NICs consumer, embedded and virtual: - stop lying about skb->truesize in USB Ethernet drivers, it messes up TCP memory calculations - Google cloud vNIC: - support changing ring size via ethtool - support ring reset using the queue control API - VirtIO net: - expose flow hash from RSS to XDP - per-queue statistics - add selftests - Synopsys (stmmac): - support controllers which require an RX clock signal from the MII bus to perform their hardware initialization - TI: - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices - icssg_prueth: add SW TX / RX Coalescing based on hrtimers - cpsw: minimal XDP support - Renesas (ravb): - support describing the MDIO bus - Realtek (r8169): - add support for RTL8168M - Microchip Sparx5: - matchall and flower actions mirred and redirect - Ethernet switches: - nVidia/Mellanox: - improve events processing performance - Marvell: - add support for MV88E6250 family internal PHYs - Microchip: - add DCB and DSCP mapping support for KSZ switches - vsc73xx: convert to PHYLINK - Realtek: - rtl8226b/rtl8221b: add C45 instances and SerDes switching - Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup - Ethernet PHYs: - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY. - micrel: lan8814: add support for PPS out and external timestamp trigger - WiFi: - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers. Modern devices can only be configured using nl80211. - mac80211/cfg80211 - handle color change per link for WiFi 7 Multi-Link Operation - Intel (iwlwifi): - don't support puncturing in 5 GHz - support monitor mode on passive channels - BZ-W device support - P2P with HE/EHT support - re-add support for firmware API 90 - provide channel survey information for Automatic Channel Selection - MediaTek (mt76): - mt7921 LED control - mt7925 EHT radiotap support - mt7920e PCI support - Qualcomm (ath11k): - P2P support for QCA6390, WCN6855 and QCA2066 - support hibernation - ieee80211-freq-limit Device Tree property support - Qualcomm (ath12k): - refactoring in preparation of multi-link support - suspend and hibernation support - ACPI support - debugfs support, including dfs_simulate_radar support - RealTek: - rtw88: RTL8723CS SDIO device support - rtw89: RTL8922AE Wi-Fi 7 PCI device support - rtw89: complete features of new WiFi 7 chip 8922AE including BT-coexistence and Wake-on-WLAN - rtw89: use BIOS ACPI settings to set TX power and channels - rtl8xxxu: enable Management Frame Protection (MFP) support - Bluetooth: - support for Intel BlazarI and Filmore Peak2 (BE201) - support for MediaTek MT7921S SDIO - initial support for Intel PCIe BT driver - remove HCI_AMP support" * tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits) selftests: netfilter: fix packetdrill conntrack testcase net: gro: fix napi_gro_cb zeroed alignment Bluetooth: btintel_pcie: Refactor and code cleanup Bluetooth: btintel_pcie: Fix warning reported by sparse Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1 Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config Bluetooth: btintel_pcie: Fix compiler warnings Bluetooth: btintel_pcie: Add *setup* function to download firmware Bluetooth: btintel_pcie: Add support for PCIe transport Bluetooth: btintel: Export few static functions Bluetooth: HCI: Remove HCI_AMP support Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() Bluetooth: qca: Fix error code in qca_read_fw_build_info() Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning Bluetooth: btintel: Add support for Filmore Peak2 (BE201) Bluetooth: btintel: Add support for BlazarI LE Create Connection command timeout increased to 20 secs dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth Bluetooth: compute LE flow credits based on recvbuf space Bluetooth: hci_sync: Use cmd->num_cis instead of magic number ...
2024-05-15Merge tag 'gpio-updates-for-v6.10-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski "This was a quiet release cycle for the GPIO tree and so this pull-request is relatively small. We have one new driver, some minor improvements to the GPIO core code and across several drivers, some DT and documentation updates but in general nothing stands out or is controversial. All changes have spent time in next with no reported issues (or ones that were quickly fixed). GPIO core: - remove more unused legacy interfaces (after converting the last remaining users to better alternatives) - update kerneldocs - improve error handling and log messages in GPIO ACPI code - remove dead code (always true checks) from GPIOLIB New drivers: - add a driver for Intel Granite Rapids-D vGPIO Driver improvements: - use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24 - provide an ID table for gpio-cros-ec to avoid a driver name fallback check - add support for gpio-ranges for GPIO drivers supporting multiple GPIO banks - switch to using dynamic GPIO base in gpio-brcmstb - fix irq handling in gpio-npcm-sgpio - switch to memory mapped IO accessors in gpio-sch DT bindings: - add support for gpio-ranges to gpio-brcmstb - add support for a new model and the gpio-line-names property to gpio-mpfs Documentation: - replace leading tabs with spaces in code blocks - fix typos" * tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (30 commits) gpio: nuvoton: Fix sgpio irq handle error gpiolib: Discourage to use formatting strings in line names gpio: brcmstb: add support for gpio-ranges gpio: of: support gpio-ranges for multiple gpiochip devices dt-bindings: gpio: brcmstb: add gpio-ranges gpio: Add Intel Granite Rapids-D vGPIO driver gpio: brcmstb: Use dynamic GPIO base numbers gpiolib: acpi: Set label for IRQ only lines gpiolib: acpi: Add fwnode name to the GPIO interrupt label gpiolib: Get rid of never false gpio_is_valid() calls gpiolib: acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by() gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio() gpiolib: acpi: Simplify error handling in __acpi_find_gpio() gpiolib: acpi: Extract __acpi_find_gpio() helper gpio: sch: Utilise temporary variable for struct device gpio: sch: Switch to memory mapped IO accessors gpio: regmap: Use -ENOTSUPP consistently gpio: pcie-idio-24: Use -ENOTSUPP consistently Documentation: gpio: Replace leading TABs by spaces in code blocks gpiolib: acpi: Check for errors first in acpi_find_gpio() ...
2024-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski8-51/+78
Merge in late fixes to prepare for the 6.10 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-14net/mlx5: Remove unused msix related exported APIsParav Pandit1-52/+0
MSIX irq allocation and free APIs are no longer in use. Hence, remove the dead code. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://lore.kernel.org/r/20240512124306.740898-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-14net/mlx5e: Modifying channels number and updating TX queuesCarolina Jubran3-51/+47
It is not appropriate for the mlx5e_num_channels_changed function to be called solely for updating the TX queues, even if the channels number has not been changed. Move the code responsible for updating the TC and TX queues from mlx5e_num_channels_changed and produce a new function called mlx5e_update_tc_and_tx_queues. This new function should only be called when the channels number remains unchanged. Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240512124306.740898-3-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-14net/mlx5: Enable 8 ports LAGShay Drory1-3/+0
This patch adds to mlx5 drivers support for 8 ports HCAs. Starting with ConnectX-8 HCAs with 8 ports are possible. As most driver parts aren't affected by such configuration most driver code is unchanged. Specially the only affected areas are: - Lag - Multiport E-Switch - Single FDB E-Switch All of the above are already factored in generic way, and LAG and VF LAG are tested, so all that left is to change a #define and remove checks which are no longer needed. However, Multiport E-Switch is not tested yet, so it is left untouched. This patch will allow to create hardware LAG/VF LAG when all 8 ports are added to the same bond device. for example, In order to activate the hardware lag a user can execute the following: ip link add bond0 type bond ip link set bond0 type bond miimon 100 mode 2 ip link set eth2 master bond0 ip link set eth3 master bond0 ip link set eth4 master bond0 ip link set eth5 master bond0 ip link set eth6 master bond0 ip link set eth7 master bond0 ip link set eth8 master bond0 ip link set eth9 master bond0 Where eth2, eth3, eth4, eth5, eth6, eth7, eth8 and eth9 are the PFs of the same HCA. Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240512124306.740898-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-11net/mlx5: Discard command completions in internal errorAkiva Goldberger1-0/+3
Fix use after free when FW completion arrives while device is in internal error state. Avoid calling completion handler in this case, since the device will flush the command interface and trigger all completions manually. Kernel log: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0xd8/0xe0 ... Call Trace: <IRQ> ? __warn+0x79/0x120 ? refcount_warn_saturate+0xd8/0xe0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0xd8/0xe0 cmd_ent_put+0x13b/0x160 [mlx5_core] mlx5_cmd_comp_handler+0x5f9/0x670 [mlx5_core] cmd_comp_notifier+0x1f/0x30 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 mlx5_eq_async_int+0xf6/0x290 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x4b/0x160 handle_irq_event+0x2e/0x80 handle_edge_irq+0x98/0x230 __common_interrupt+0x3b/0xa0 common_interrupt+0x7b/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 Fixes: 51d138c2610a ("net/mlx5: Fix health error state handling") Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240509112951.590184-6-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-11net/mlx5: Add a timeout to acquire the command queue semaphoreAkiva Goldberger1-9/+32
Prevent forced completion handling on an entry that has not yet been assigned an index, causing an out of bounds access on idx = -22. Instead of waiting indefinitely for the sem, blocking flow now waits for index to be allocated or a sem acquisition timeout before beginning the timer for FW completion. Kernel log example: mlx5_core 0000:06:00.0: wait_func_handle_exec_timeout:1128:(pid 185911): cmd[-22]: CREATE_UCTX(0xa04) No done completion Fixes: 8e715cd613a1 ("net/mlx5: Set command entry semaphore up once got index free") Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240509112951.590184-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-11net/mlx5: Reload only IB representors upon lag disable/enableMaher Sanalla4-17/+25
On lag disable, the bond IB device along with all of its representors are destroyed, and then the slaves' representors get reloaded. In case the slave IB representor load fails, the eswitch error flow unloads all representors, including ethernet representors, where the netdevs get detached and removed from lag bond. Such flow is inaccurate as the lag driver is not responsible for loading/unloading ethernet representors. Furthermore, the flow described above begins by holding lag lock to prevent bond changes during disable flow. However, when reaching the ethernet representors detachment from lag, the lag lock is required again, triggering the following deadlock: Call trace: __switch_to+0xf4/0x148 __schedule+0x2c8/0x7d0 schedule+0x50/0xe0 schedule_preempt_disabled+0x18/0x28 __mutex_lock.isra.13+0x2b8/0x570 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x4c/0x68 mlx5_lag_remove_netdev+0x3c/0x1a0 [mlx5_core] mlx5e_uplink_rep_disable+0x70/0xa0 [mlx5_core] mlx5e_detach_netdev+0x6c/0xb0 [mlx5_core] mlx5e_netdev_change_profile+0x44/0x138 [mlx5_core] mlx5e_netdev_attach_nic_profile+0x28/0x38 [mlx5_core] mlx5e_vport_rep_unload+0x184/0x1b8 [mlx5_core] mlx5_esw_offloads_rep_load+0xd8/0xe0 [mlx5_core] mlx5_eswitch_reload_reps+0x74/0xd0 [mlx5_core] mlx5_disable_lag+0x130/0x138 [mlx5_core] mlx5_lag_disable_change+0x6c/0x70 [mlx5_core] // hold ldev->lock mlx5_devlink_eswitch_mode_set+0xc0/0x410 [mlx5_core] devlink_nl_cmd_eswitch_set_doit+0xdc/0x180 genl_family_rcv_msg_doit.isra.17+0xe8/0x138 genl_rcv_msg+0xe4/0x220 netlink_rcv_skb+0x44/0x108 genl_rcv+0x40/0x58 netlink_unicast+0x198/0x268 netlink_sendmsg+0x1d4/0x418 sock_sendmsg+0x54/0x60 __sys_sendto+0xf4/0x120 __arm64_sys_sendto+0x30/0x40 el0_svc_common+0x8c/0x120 do_el0_svc+0x30/0xa0 el0_svc+0x20/0x30 el0_sync_handler+0x90/0xb8 el0_sync+0x160/0x180 Thus, upon lag enable/disable, load and unload only the IB representors of the slaves preventing the deadlock mentioned above. While at it, refactor the mlx5_esw_offloads_rep_load() function to have a static helper method for its internal logic, in symmetry with the representor unload design. Fixes: 598fe77df855 ("net/mlx5: Lag, Create shared FDB when in switchdev mode") Co-developed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240509112951.590184-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-11net/mlx5: Fix peer devlink set for SF representor devlink portShay Drory2-20/+13
The cited patch change register devlink flow, and neglect to reflect the changes for peer devlink set logic. Peer devlink set is triggering a call trace if done after devl_register.[1] Hence, align peer devlink set logic with register devlink flow. [1] WARNING: CPU: 4 PID: 3394 at net/devlink/core.c:155 devlink_rel_nested_in_add+0x177/0x180 CPU: 4 PID: 3394 Comm: kworker/u40:1 Not tainted 6.9.0-rc4_for_linust_min_debug_2024_04_16_14_08 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_vhca_event0 mlx5_vhca_state_work_handler [mlx5_core] RIP: 0010:devlink_rel_nested_in_add+0x177/0x180 Call Trace: <TASK> ? __warn+0x78/0x120 ? devlink_rel_nested_in_add+0x177/0x180 ? report_bug+0x16d/0x180 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? devlink_port_init+0x30/0x30 ? devlink_port_type_clear+0x50/0x50 ? devlink_rel_nested_in_add+0x177/0x180 ? devlink_rel_nested_in_add+0xdd/0x180 mlx5_sf_mdev_event+0x74/0xb0 [mlx5_core] notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_sf_dev_probe+0x185/0x3e0 [mlx5_core] auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc5/0x3a0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x64f/0x860 __auxiliary_device_add+0x3b/0xa0 mlx5_sf_dev_add+0x139/0x330 [mlx5_core] mlx5_sf_dev_state_change_handler+0x1e4/0x250 [mlx5_core] notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core] process_one_work+0x13f/0x2e0 worker_thread+0x2bd/0x3c0 ? rescuer_thread+0x410/0x410 kthread+0xc4/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x50 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Fixes: bf729988303a ("net/mlx5: Restore mistakenly dropped parts in register devlink flow") Fixes: c6e77aa9dd82 ("net/mlx5: Register devlink first under devlink lock") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240509112951.590184-3-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-11net/mlx5e: Fix netif state handlingShay Drory1-5/+5
mlx5e_suspend cleans resources only if netif_device_present() returns true. However, mlx5e_resume changes the state of netif, via mlx5e_nic_enable, only if reg_state == NETREG_REGISTERED. In the below case, the above leads to NULL-ptr Oops[1] and memory leaks: mlx5e_probe _mlx5e_resume mlx5e_attach_netdev mlx5e_nic_enable <-- netdev not reg, not calling netif_device_attach() register_netdev <-- failed for some reason. ERROR_FLOW: _mlx5e_suspend <-- netif_device_present return false, resources aren't freed :( Hence, clean resources in this case as well. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP CPU: 2 PID: 9345 Comm: test-ovs-ct-gen Not tainted 6.5.0_for_upstream_min_debug_2023_09_05_16_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at0xffffffffffffffd6. RSP: 0018:ffff888178aaf758 EFLAGS: 00010246 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x14c/0x3c0 ? exc_page_fault+0x75/0x140 ? asm_exc_page_fault+0x22/0x30 notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_core_uplink_netdev_event_replay+0x3e/0x60 [mlx5_core] mlx5_mdev_netdev_track+0x53/0x60 [mlx5_ib] mlx5_ib_roce_init+0xc3/0x340 [mlx5_ib] __mlx5_ib_add+0x34/0xd0 [mlx5_ib] mlx5r_probe+0xe1/0x210 [mlx5_ib] ? auxiliary_match_id+0x6a/0x90 auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x637/0x840 __auxiliary_device_add+0x3b/0xa0 add_adev+0xc9/0x140 [mlx5_core] mlx5_rescan_drivers_locked+0x22a/0x310 [mlx5_core] mlx5_register_device+0x53/0xa0 [mlx5_core] mlx5_init_one_devl_locked+0x5c4/0x9c0 [mlx5_core] mlx5_init_one+0x3b/0x60 [mlx5_core] probe_one+0x44c/0x730 [mlx5_core] local_pci_probe+0x3e/0x90 pci_device_probe+0xbf/0x210 ? kernfs_create_link+0x5d/0xa0 ? sysfs_do_create_link_sd+0x60/0xc0 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 pci_bus_add_device+0x54/0x80 pci_iov_add_virtfn+0x2e6/0x320 sriov_enable+0x208/0x420 mlx5_core_sriov_configure+0x9e/0x200 [mlx5_core] sriov_numvfs_store+0xae/0x1a0 kernfs_fop_write_iter+0x10c/0x1a0 vfs_write+0x291/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- Fixes: 2c3b5beec46a ("net/mlx5e: More generic netdev management API") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240509112951.590184-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-08xsk: use generic DMA sync shortcut instead of a custom oneAlexander Lobakin2-3/+3
XSk infra's been using its own DMA sync shortcut to try avoiding redundant function calls. Now that there is a generic one, remove the custom implementation and rely on the generic helpers. xsk_buff_dma_sync_for_cpu() doesn't need the second argument anymore, remove it. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-05-08net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet5-6/+6
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07Merge tag 'intel-gpio-v6.10-1' of ↵Bartosz Golaszewski1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next intel-gpio for v6.10-1 * New driver for vGPIO controller on Intel Granite Rapids-D * Update ACPI GPIO library to unify the IRQ code path * Better GPIO IRQ line labeling for ACPI * Switched Intel SCH driver to use "mapped" I/O accessors The following is an automated git shortlog grouped by driver: Add Intel Granite Rapids-D vGPIO driver: - Add Intel Granite Rapids-D vGPIO driver crystalcove: - Use -ENOTSUPP consistently gpiolib: - acpi: Set label for IRQ only lines - acpi: Add fwnode name to the GPIO interrupt label - acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by() - acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio() - acpi: Simplify error handling in __acpi_find_gpio() - acpi: Extract __acpi_find_gpio() helper - acpi: Check for errors first in acpi_find_gpio() - acpi: Remove never true check in acpi_get_gpiod_by_index() sch: - Utilise temporary variable for struct device - Switch to memory mapped IO accessors wcove: - Use -ENOTSUPP consistently
2024-05-03net/mlx5e: flower: check for unsupported control flagsAsbjørn Sloth Tønnesen1-6/+4
Use flow_rule_is_supp_control_flags() to reject filters with unsupported control flags. In case any unsupported control flags are masked, flow_rule_is_supp_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Remove FLOW_DIS_FIRST_FRAG specific error message, and treat it as any other unsupported control flag. Only compile-tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240422152728.175677-1-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-29ipv6: introduce dst_rt6_info() helperEric Dumazet1-1/+1
Instead of (struct rt6_info *)dst casts, we can use : #define dst_rt6_info(_ptr) \ container_of_const(_ptr, struct rt6_info, dst) Some places needed missing const qualifiers : ip6_confirm_neigh(), ipv6_anycast_destination(), ipv6_unicast_destination(), has_gateway() v2: added missing parts (David Ahern) Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-29mlxsw: pci: Use NAPI for event processingAmit Cohen1-19/+77
Spectrum ASICs only support a single interrupt, that means that all the events are handled by one IRQ (interrupt request) handler. Once an interrupt is received, we schedule tasklet to handle events from EQ and then schedule tasklets to handle completions from CQs. Tasklet runs in softIRQ (software IRQ) context, and will be run on the same CPU which scheduled it. That means that today we use only one CPU to handle all the packets (both network packets and EMADs) from hardware. This can be improved using NAPI. The idea is to use NAPI instance per CQ, which is mapped 1:1 to DQ (RDQ or SDQ). NAPI poll method can be run in kernel thread, so then the driver will be able to handle WQEs in several CPUs. Convert the existing code to use NAPI APIs. Add NAPI instance as part of 'struct mlxsw_pci_queue' and initialize it as part of CQs initialization. Set the appropriate poll method and dummy net device, according to queue number, similar to tasklet setup. For CQs which are used for completions of RDQ, use Rx poll method and 'napi_dev_rx', which is set as 'threaded'. It means that Rx poll method will run in kernel context, so several RDQs will be handled in parallel. For CQs which are used for completions of SDQ, use Tx poll method and 'napi_dev_tx', this method will run in softIRQ context, as it is recommended in NAPI documentation, as Tx packets' processing is short task. Convert mlxsw_pci_cq_{rx,tx}_tasklet() to poll methods. Handle 'budget' argument - ignore it in Tx poll method, as it is recommended to not limit Tx processing. For Rx processing, handle up to 'budget' completions. Return 'work_done' which is the amount of completions that were handled. Handle the following cases: 1. After processing 'budget' completions, the driver still has work to do: Return work-done = budget. In that case, the NAPI instance will be polled again (without the need to be rescheduled). Do not re-arm the queue, as NAPI will handle the reschedule, so we do not have to involve hardware to send an additional interrupt for the completions that should be processed. 2. Event processing has been completed: Call napi_complete_done() to mark NAPI processing as completed, which means that the poll method will not be rescheduled. Re-arm the queue, as all completions were handled. In case that poll method handled exactly 'budget' completions, return work-done = budget -1, to distinguish from the case that driver still has completions to handle. Otherwise, return the amount of completions that were handled. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-29mlxsw: pci: Reorganize 'mlxsw_pci_queue' structureAmit Cohen1-38/+38
The next patch will set the driver to use NAPI for event processing. Then tasklet mechanism will be used only for EQ. Reorganize 'mlxsw_pci_queue' to hold EQ and CQ attributes in a union. For now, add tasklet for both EQ and CQ. This will be changed in the next patch, as 'tasklet_struct' will be replaced with NAPI instance. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-29mlxsw: pci: Initialize dummy net devices for NAPIAmit Cohen1-0/+41
mlxsw will use NAPI for event processing in a next patch. As preparation, add two dummy net devices and initialize them. NAPI instance should be attached to net device. Usually each queue is used by a single net device in network drivers, so the mapping between net device to NAPI instance is intuitive. In our case, Rx queues are not per port, they are per trap-group. Tx queues are mapped to net devices, but we do not have a separate queue for each local port, several ports share the same queue. Use init_dummy_netdev() to initialize dummy net devices for NAPI. To run NAPI poll method in a kernel thread, the net device which NAPI instance is attached to should be marked as 'threaded'. It is recommended to handle Tx packets in softIRQ context, as usually this is a short task - just free the Tx packet which has been transmitted. Rx packets handling is more complicated task, so drivers can use a dedicated kernel thread to process them. It allows processing packets from different Rx queues in parallel. We would like to handle only Rx packets in kernel threads, which means that we will use two dummy net devices (one for Rx and one for Tx). Set only one of them with 'threaded' as it will be used for Rx processing. Do not fail in case that setting 'threaded' fails, as it is better to use regular softIRQ NAPI rather than preventing the driver from loading. Note that the net devices are initialized with init_dummy_netdev(), so they are not registered, which means that they will not be visible to user. It will not be possible to change 'threaded' configuration from user space, but it is reasonable in our case, as there is no another configuration which makes sense, considering that user has no influence on the usage of each queue. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-29mlxsw: pci: Ring RDQ and CQ doorbells once per several completionsAmit Cohen1-7/+3
Currently, for each CQE in CQ, we ring CQ doorbell, then handle RDQ and ring RDQ doorbell. Finally we ring CQ arm doorbell - once per CQ tasklet. The idea of ringing CQ doorbell before RDQ doorbell, is to be sure that when we post new WQE (after RDQ is handled), there is an available CQE. This was done because of a hardware bug as part of commit c9ebea04cb1b ("mlxsw: pci: Ring CQ's doorbell before RDQ's"). There is no real reason to ring RDQ and CQ doorbells for each completion, it is better to handle several completions and reduce number of ringings, as access to hardware is expensive (time wise) and might take time because of memory barriers. A previous patch changed CQ tasklet to handle up to 64 Rx packets. With this limitation, we can ring CQ and RDQ doorbells once per CQ tasklet. The counters of the doorbells are increased by the amount of packets that we handled, then the device will know for which completion to send an additional event. To avoid reordering CQ and RDQ doorbells' ring, let the tasklet to ring also RDQ doorbell, mlxsw_pci_cqe_rdq_handle() handles the counter but does not ring the doorbell. Note that with this change there is no need to copy the CQE, as we ring CQ doorbell only after Rx packet processing (which uses the CQE) is done. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-29mlxsw: pci: Handle up to 64 Rx completions in taskletAmit Cohen1-2/+3
We can get many completions in one interrupt. Currently, the CQ tasklet handles up to half queue size completions, and then arms the hardware to generate additional events, which means that in case that there were additional completions that we did not handle, we will get immediately an additional interrupt to handle the rest. The decision to handle up to half of the queue size is arbitrary and was determined in 2015, when mlxsw driver was added to the kernel. One additional fact that should be taken into account is that while WQEs from RDQ are handled, the CPU that handles the tasklet is dedicated for this task, which means that we might hold the CPU for a long time. Handle WQEs in smaller chucks, then arm CQ doorbell to notify the hardware to send additional notifications. Set the chunk size to 64 as this number is recommended using NAPI and the driver will use NAPI in a next patch. Note that for now we use ARM doorbell to retrigger CQ tasklet, but with NAPI it will be more efficient as software will reschedule the poll method and we will not involve hardware for that. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski6-66/+87
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/ti/icssg/icssg_prueth.c net/mac80211/chan.c 89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link") 87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()") https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/ net/unix/garbage.c 1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.") drivers/net/ethernet/ti/icssg/icssg_prueth.c drivers/net/ethernet/ti/icssg/icssg_common.c 4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()") e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25net/mlx5e: Advertise mlx5 ethernet driver updates sk_buff md_dst for MACsecRahul Rameshbabu1-0/+1
mlx5 Rx flow steering and CQE handling enable the driver to be able to update an skb's md_dst attribute as MACsec when MACsec traffic arrives when a device is configured for offloading. Advertise this to the core stack to take advantage of this capability. Cc: stable@vger.kernel.org Fixes: b7c9400cbc48 ("net/mlx5e: Implement MACsec Rx data path using MACsec skb_metadata_dst") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20240423181319.115860-5-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25Merge branch '100GbE' of ↵Jakub Kicinski6-7/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: Support 5 layer Tx scheduler topology Mateusz Polchlopek says: For performance reasons there is a need to have support for selectable Tx scheduler topology. Currently firmware supports only the default 9-layer and 5-layer topology. This patch series enables switch from default to 5-layer topology, if user decides to opt-in. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: Document tx_scheduling_layers parameter ice: Add tx_scheduling_layers devlink param ice: Enable switching default Tx scheduler topology ice: Adjust the VSI/Aggregator layers ice: Support 5 layer topology devlink: extend devlink_param *set pointer ==================== Link: https://lore.kernel.org/r/20240422203913.225151-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25mlxsw: spectrum_acl_tcam: Fix memory leak when canceling rehash workIdo Schimmel1-1/+5
The rehash delayed work is rescheduled with a delay if the number of credits at end of the work is not negative as supposedly it means that the migration ended. Otherwise, it is rescheduled immediately. After "mlxsw: spectrum_acl_tcam: Fix possible use-after-free during rehash" the above is no longer accurate as a non-negative number of credits is no longer indicative of the migration being done. It can also happen if the work encountered an error in which case the migration will resume the next time the work is scheduled. The significance of the above is that it is possible for the work to be pending and associated with hints that were allocated when the migration started. This leads to the hints being leaked [1] when the work is canceled while pending as part of ACL region dismantle. Fix by freeing the hints if hints are associated with a work that was canceled while pending. Blame the original commit since the reliance on not having a pending work associated with hints is fragile. [1] unreferenced object 0xffff88810e7c3000 (size 256): comm "kworker/0:16", pid 176, jiffies 4295460353 hex dump (first 32 bytes): 00 30 95 11 81 88 ff ff 61 00 00 00 00 00 00 80 .0......a....... 00 00 61 00 40 00 00 00 00 00 00 00 04 00 00 00 ..a.@........... backtrace (crc 2544ddb9): [<00000000cf8cfab3>] kmalloc_trace+0x23f/0x2a0 [<000000004d9a1ad9>] objagg_hints_get+0x42/0x390 [<000000000b143cf3>] mlxsw_sp_acl_erp_rehash_hints_get+0xca/0x400 [<0000000059bdb60a>] mlxsw_sp_acl_tcam_vregion_rehash_work+0x868/0x1160 [<00000000e81fd734>] process_one_work+0x59c/0xf20 [<00000000ceee9e81>] worker_thread+0x799/0x12c0 [<00000000bda6fe39>] kthread+0x246/0x300 [<0000000070056d23>] ret_from_fork+0x34/0x70 [<00000000dea2b93e>] ret_from_fork_asm+0x1a/0x30 Fixes: c9c9af91f1d9 ("mlxsw: spectrum_acl: Allow to interrupt/continue rehash work") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/0cc12ebb07c4d4c41a1265ee2c28b392ff997a86.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25mlxsw: spectrum_acl_tcam: Fix incorrect list API usageIdo Schimmel1-0/+7
Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 #39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d4e302 ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/4628e9a22d1d84818e28310abbbc498e7bc31bc9.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25mlxsw: spectrum_acl_tcam: Fix warning during rehashIdo Schimmel1-3/+17
As previously explained, the rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. When the work runs out of credits it stores the current chunk and entry as markers in the per-work context so that it would know where to resume the migration from the next time the work is scheduled. Upon error, the chunk marker is reset to NULL, but without resetting the entry markers despite being relative to it. This can result in migration being resumed from an entry that does not belong to the chunk being migrated. In turn, this will eventually lead to a chunk being iterated over as if it is an entry. Because of how the two structures happen to be defined, this does not lead to KASAN splats, but to warnings such as [1]. Fix by creating a helper that resets all the markers and call it from all the places the currently only reset the chunk marker. For good measures also call it when starting a completely new rehash. Add a warning to avoid future cases. [1] WARNING: CPU: 7 PID: 1076 at drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:407 mlxsw_afk_encode+0x242/0x2f0 Modules linked in: CPU: 7 PID: 1076 Comm: kworker/7:24 Tainted: G W 6.9.0-rc3-custom-00880-g29e61d91b77b #29 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_afk_encode+0x242/0x2f0 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0xd9/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x109/0x290 mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 </TASK> Fixes: 6f9579d4e302 ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/cc17eed86b41dd829d39b07906fec074a9ce580e.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25mlxsw: spectrum_acl_tcam: Fix memory leak during rehashIdo Schimmel1-0/+4
The rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. If the migration fails, the code tries to migrate the filters back to the old region. However, the rollback itself can also fail in which case another migration will be erroneously performed. Besides the fact that this ping pong is not a very good idea, it also creates a problem. Each virtual chunk references two chunks: The currently used one ('vchunk->chunk') and a backup ('vchunk->chunk2'). During migration the first holds the chunk we want to migrate filters to and the second holds the chunk we are migrating filters from. The code currently assumes - but does not verify - that the backup chunk does not exist (NULL) if the currently used chunk does not reference the target region. This assumption breaks when we are trying to rollback a rollback, resulting in the backup chunk being overwritten and leaked [1]. Fix by not rolling back a failed rollback and add a warning to avoid future cases. [1] WARNING: CPU: 5 PID: 1063 at lib/parman.c:291 parman_destroy+0x17/0x20 Modules linked in: CPU: 5 PID: 1063 Comm: kworker/5:11 Tainted: G W 6.9.0-rc2-custom-00784-gc6a05c468a0b #14 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:parman_destroy+0x17/0x20 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_region_fini+0x19/0x60 mlxsw_sp_acl_tcam_region_destroy+0x49/0xf0 mlxsw_sp_acl_tcam_vregion_rehash_work+0x1f1/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 843500518509 ("mlxsw: spectrum_acl: Do rollback as another call to mlxsw_sp_acl_tcam_vchunk_migrate_all()") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/d5edd4f4503934186ae5cfe268503b16345b4e0f.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-10 15:07:14 +0300