summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qlogic/qla3xxx.c
AgeCommit message (Collapse)AuthorFilesLines
2013-03-10drivers:net: Remove unnecessary OOM messages after netdev_alloc_skbJoe Perches1-1/+0
Emitting netdev_alloc_skb and netdev_alloc_skb_ip_align OOM messages is unnecessary as there is already a dump_stack after allocation failures. Other trivial changes around these removals: Convert a few comparisons of pointer to 0 to !pointer. Change flow to remove unnecessary label. Remove now unused variable. Hoist assignment from if. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-04ethernet: Remove unnecessary alloc/OOM messages, alloc cleanupsJoe Perches1-6/+4
alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Convert kmalloc's with multiplies to kmalloc_array. Fix a few whitespace defects. Convert a constant 6 to ETH_ALEN. Use parentheses around sizeof. Convert vmalloc/memset to vzalloc. Remove now unused size variables. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-09remove init of dev->perm_addr in driversJiri Pirko1-1/+0
perm_addr is initialized correctly in register_netdevice() so to init it in drivers is no longer needed. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07drivers/net: fix up function prototypes after __dev* removalsGreg Kroah-Hartman1-1/+1
The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03qla3xxx: remove __dev* attributesBill Pemberton1-3/+3
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+7
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c Minor conflict between the BCM_CNIC define removal in net-next and a bug fix added to net. Based upon a conflict resolution patch posted by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31qla3xxx: remove unused variable in ql_process_mac_tx_intr()Wei Yongjun1-3/+0
The variable retval is initialized but never used otherwise, so remove the unused variable. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31qla3xxx: use module_pci_driver to simplify the codeWei Yongjun1-12/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-22qla3xxx: Ensure request/response queue addr writes to the registersJoe Jin1-2/+7
Before use the request and response queue addr, make sure it has wrote to the registers. Signed-off-by: Joe Jin <joe.jin@oracle.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-07qla3xxx: ethernet: Silence static checker warning.Santosh Nayak1-1/+1
Silence the following warning: "warn: returning -1 instead of -ENOMEM is sloppy". Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+2
Conflicts: drivers/net/vmxnet3/vmxnet3_drv.c Small vmxnet3 conflict with header size bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-06qla3xxx: ethernet: Fix bogus interrupt state flag.Santosh Nayak1-3/+2
In 'ql_adapter_initialize' the first call for 'spin_unlock_irqrestore()' is with hw_flags = 0, which is as good as 'spin_unlock_irq()' (unconditional interrupt enabling). If this is intended, then for better performance 'spin_unlock_irqrestore()' can be replaced with 'spin_unlock_irq()' and 'spin_lock_irqsave()' can be replaced by 'spin_lock_irq() Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-01drivers/net: Remove alloc_etherdev error messagesJoe Perches1-1/+0
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23Sweep away N/A fw_version dustbunnies from the .get_drvinfo routine of a ↵Rick Jones1-1/+0
number of drivers Per discussion with Ben Hutchings and David Miller, go through and remove assignments of "N/A" to fw_version in various drivers' .get_drvinfo routines. While there clean-up some use of bare constants and such. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-09sweep the floors and convert some .get_drvinfo routines to strlcpyRick Jones1-4/+6
Per the mention made by Ben Hutchings that strlcpy is now the preferred string copy routine for a .get_drvinfo routine, do a bit of floor sweeping and convert some of the as-yet unconverted ethernet drivers to it. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19net: add skb frag size accessorsEric Dumazet1-3/+3
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-07net: use DMA_x_DEVICE and dma_mapping_error with skb_frag_dma_mapIan Campbell1-2/+2
When I converted some drivers from pci_map_page to skb_frag_dma_map I neglected to convert PCI_DMA_xDEVICE into DMA_x_DEVICE and pci_dma_mapping_error into dma_mapping_error. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15qla3xxx: convert to SKB paged frag API.Ian Campbell1-3/+2
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18net: remove use of ndo_set_multicast_list in driversJiri Pirko1-1/+0
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11qlogic: Move the QLogic driversJeff Kirsher1-0/+3970
Moves the QLogic drivers into drivers/net/ethernet/qlogic/ and the necessary Kconfig and Makefile changes. CC: Ron Mercer <ron.mercer@qlogic.com> CC: Amit Kumar Salecha <amit.salecha@qlogic.com> CC: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-25 15:33:50 +0300