summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
AgeCommit message (Collapse)AuthorFilesLines
2013-05-23qlcnic: remove netdev->trans_start updates within the driverSony Chacko1-2/+0
Code is removed because netdev->trans_start updates made by the driver will be ignored by the kernel. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-12qlcnic: Fix reset recovery after transmit timeoutSony Chacko1-9/+13
o When transmit timeout happens, recovery attempt should start with adapter soft reset. If soft reset fails to resume traffic, firmware dump will be collected and driver will perform a hard reset of the adapter. Reset recovery on 83xx was failing after a hard reset. This patch fixes that issue. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-25qlcnic: Take EPORT out of reset sequence before disabling PAUSEManish Chopra1-0/+25
o Disabling PAUSE requires access to EPORT registers, which may cause a wedge, if EPORT is in reset. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-20qlcnic: VF reset recovery implementation.Rajesh Borundia1-14/+13
o Implement recovery mechanism for VF to recover from adapter resets. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-29qlcnic: SR-IOV VF probeRajesh Borundia1-1/+5
o Add PCI device entry for VF. o Add HW operations for VF. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-29qlcnic: Support SR-IOV enable and disableRajesh Borundia1-2/+14
o Add QLCNIC_SRIOV to Kconfig. o Provide PCI sysfs hooks to enable and disable SR-IOV. o Allow enabling only when CONFIG_QLCNIC_SRIOV is defined. o qlcnic_sriov_pf.c has all the PF related SR-IOV functionality. o qlcnic_sriov_common.c has VF functionality and SR-IOV functionality which is common between VF and PF. o qlcnic_sriov.h is a common header file for SR-IOV defines. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-10qlcnic: Fix endian issues in 83xx driverShahed Shaikh1-4/+29
o Split mailbox structure elements on boundary of adapter register size i.e. 32bit. o Shuffle the position of structure elements based on CPU endianness. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-22qlcnic: Fix configure interrupts for 83xx adapter typesManish Chopra1-7/+0
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11qlcnic: fix initialize NIC mailbox commandHimanshu Madhani1-3/+6
Register for firmware based Inter Driver Communication (IDC) using initialize NIC as the first mailbox command Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-05qlcnic: Updating copyright information.Jitendra Kalsaria1-0/+7
We recently refactored the driver source, this patch will take care of updating copyright date and adding it to newly added files. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-04ethernet: Remove unnecessary alloc/OOM messages, alloc cleanupsJoe Perches1-10/+4
alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Convert kmalloc's with multiplies to kmalloc_array. Fix a few whitespace defects. Convert a constant 6 to ETH_ALEN. Use parentheses around sizeof. Convert vmalloc/memset to vzalloc. Remove now unused size variables. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02qlcnic: 83xx register dump routinesSony Chacko1-0/+7
Add 83xx register dump routines Update 82xx register dump routines Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02qlcnic: enable 83xx virtual NIC modeSony Chacko1-1/+52
Enable 83xx virtual NIC mode Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02qlcnic: flash template based firmware reset recoverySony Chacko1-0/+479
Flash template provides instructions to stop, restart and initalize the firmware. These instructions are abstracted as a series of read, write and poll operations on hardware registers. Register information and operation specifics are not exposed to the driver. Driver reads the template from flash and executes the instructions located at pre-defined offsets. Template based firmware reset recovery and initialization mechanism minimize driver changes as firmware evolves. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-02qlcnic: 83xx CNA inter driver communication mechanismSony Chacko1-0/+1513
Inter Driver Communication (IDC) module. CNA function drivers(ISCSI, FCOE and NIC) which shares the adapter relies on IDC mechanism for gracefull shut down, restart and firmware error recovery. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>