| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Due to a typo, the code checked the RX checksum feature in the TX path.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20231122004219.3504219-1-samuel.holland@sifive.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a VF tries to add unsupported cloud filter through virtchnl
then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but
this error code is stored in 'ret' instead of 'aq_ret' that
is used as error code sent back to VF. In this scenario where
one of the mentioned functions fails the value of 'aq_ret'
is zero so the VF will incorrectly receive a 'success'.
Use 'aq_ret' to store return value and remove 'ret' local
variable. Additionally fix the issue when filter allocation
fails, in this case no notification is sent back to the VF.
Fixes: e284fc280473 ("i40e: Add and delete cloud filter")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset()
to disable timestamping while the device is resetting. This operation
destroys the user requested configuration. While the driver does call
ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings
after a reset, it unconditionally passes true or false, resulting in
failure to restore previous user space configuration.
This results in a device reset forcibly disabling timestamp configuration
regardless of current user settings.
This was not detected previously due to a quirk of the LinuxPTP ptp4l
application. If ptp4l detects a missing timestamp, it enters a fault state
and performs recovery logic which includes executing SIOCSHWTSTAMP again,
restoring the now accidentally cleared configuration.
Not every application does this, and for these applications, timestamps
will mysteriously stop after a PF reset, without being restored until an
application restart.
Fix this by replacing ice_ptp_cfg_timestamp() with two new functions:
1) ice_ptp_disable_timestamp_mode() which unconditionally disables the
timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release()
2) ice_ptp_restore_timestamp_mode() which calls
ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration,
calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and
issues an immediate TSYN_TX interrupt to ensure that timestamps which
may have occurred during the device reset get processed.
Modify the ice_ptp_set_timestamp_mode to directly save the user
configuration and then call ice_ptp_restore_timestamp_mode. This way, reset
no longer destroys the saved user configuration.
This obsoletes the ice_set_tx_tstamp() function which can now be safely
removed.
With this change, all devices should now restore Tx and Rx timestamping
functionality correctly after a PF reset without application intervention.
Fixes: 77a781155a65 ("ice: enable receive hardware timestamping")
Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") modified
how Tx timestamps are handled for E822 devices. On these devices, only the
clock owner handles reading the Tx timestamp data from firmware. To do
this, the PFINT_TSYN_MSK register is modified from the default value to one
which enables reacting to a Tx timestamp on all PHY ports.
The driver currently programs PFINT_TSYN_MSK in different places depending
on whether the port is the clock owner or not. For the clock owner, the
PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before
calling ice_ptp_tx_ena_intr to program the PHY ports.
For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during
ice_ptp_init_port.
If a large enough device reset occurs, the PFINT_TSYN_MSK register will be
reset to the default value in which only the PHY associated directly with
the PF will cause the Tx timestamp interrupt to trigger.
The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a
device reset. For the E822 device, this results in the PF no longer
responding to interrupts for other ports. This results in failure to
deliver Tx timestamps to user space applications.
Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify
the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place.
This function will program both registers according to the combination of
user configuration and device requirements.
This ensures that PFINT_TSYN_MSK is always restored when we configure the
Tx timestamp interrupt.
Fixes: d938a8cca88a ("ice: Auxbus devices & driver for E822 TS")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx
ring variable to see if timestamping is enabled on that ring. This value is
set for all rings whenever userspace configures Tx timestamping.
Ostensibly this was done to avoid wasting cycles checking other fields when
timestamping has not been enabled. However, for Tx timestamps we already
get an individual per-SKB flag indicating whether userspace wants to
request a timestamp on that packet. We do not gain much by also having
a separate flag to check for whether timestamping was enabled.
In fact, the driver currently fails to restore the field after a PF reset.
Because of this, if a PF reset occurs, timestamps will be disabled.
Since this flag doesn't add value in the hotpath, remove it and always
provide a timestamp if the SKB flag has been set.
A following change will fix the reset path to properly restore user
timestamping configuration completely.
This went unnoticed for some time because one of the most common
applications using Tx timestamps, ptp4l, will reconfigure the socket as
part of its fault recovery logic.
Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
xgbe_get_link_ksettings() does not propagate correct speed and duplex
information to ethtool during cable unplug. Due to which ethtool reports
incorrect values for speed and duplex.
Address this by propagating correct information.
Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The existing implementation uses software logic to accumulate tx
completions until the specified time (1ms) is met and then poll them.
However, there exists a tiny gap which leads to a race between
resetting and checking the tx_activate flag. Due to this the tx
completions are not reported to upper layer and tx queue timeout
kicks-in restarting the device.
To address this, introduce a tx cleanup mechanism as part of the
periodic maintenance process.
Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Force the mode change for SFI in Fixed PHY configurations. Fixed PHY
configurations needs PLL to be enabled while doing mode set. When the
SFP module isn't connected during boot, driver assumes AN is ON and
attempts auto-negotiation. However, if the connected SFP comes up in
Fixed PHY configuration the link will not come up as PLL isn't enabled
while the initial mode set command is issued. So, force the mode change
for SFI in Fixed PHY configuration to fix link issues.
Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
queue than its PF
It is possible to add a ntuple rule which would like to direct packet to
a VF whose number of queues are greater/less than its PF's queue numbers.
For example a PF can have 2 Rx queues but a VF created on that PF can have
8 Rx queues. As of today, ntuple rule will reject rule because it is
checking the requested queue number against PF's number of Rx queues.
As a part of this fix if the action of a ntuple rule is to move a packet
to a VF's queue then the check is removed. Also, a debug information is
printed to aware user that it is user's responsibility to cross check if
the requested queue number on that VF is a valid one.
Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231121165624.3664182-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit efa5f1311c4998e9e6317c52bc5ee93b3a0f36df.
I couldn't reproduce the reported issue. What I did, based on a pcap
packet log provided by the reporter:
- Used same chip version (RTL8168h)
- Set MAC address to the one used on the reporters system
- Replayed the EAPOL unicast packet that, according to the reporter,
was filtered out by the mc filter.
The packet was properly received.
Therefore the root cause of the reported issue seems to be somewhere
else. Disabling mc filtering completely for the most common chip
version is a quite big hammer. Therefore revert the change and wait
for further analysis results from the reporter.
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During 'ifconfig <netdev> down' one RSS memory was not getting freed.
This patch fixes the same.
Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the device uses a custom subsystem vendor ID, the function
wx_sw_init() returns before the memory of 'wx->mac_table' is allocated.
The null pointer will causes the kernel panic.
Fixes: 79625f45ca73 ("net: wangxun: Move MAC address handling to libwx")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only present the DWMAC_LOONGSON option on architectures where it can
actually be used.
This follows the same logic as the DWMAC_INTEL option.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
representors
Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails. This logic for representors is identical to normal flow
with ethtool.
Without check, will trigger -Wformat-truncation with W=1.
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c: In function 'mlx5e_rep_get_drvinfo':
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:78:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
78 | "%d.%d.%04d (%.16s)",
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:77:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
77 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
78 | "%d.%d.%04d (%.16s)",
| ~~~~~~~~~~~~~~~~~~~~~
79 | fw_rev_maj(mdev), fw_rev_min(mdev),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
80 | fw_rev_sub(mdev), mdev->board_id);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: cf83c8fdcd47 ("net/mlx5e: Add missing ethtool driver info for representors")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-16-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails.
Without check, will trigger -Wformat-truncation with W=1.
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_ethtool_get_drvinfo':
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:49:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
49 | "%d.%d.%04d (%.16s)",
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:48:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
48 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
49 | "%d.%d.%04d (%.16s)",
| ~~~~~~~~~~~~~~~~~~~~~
50 | fw_rev_maj(mdev), fw_rev_min(mdev), fw_rev_sub(mdev),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
51 | mdev->board_id);
| ~~~~~~~~~~~~~~~
Fixes: 84e11edb71de ("net/mlx5e: Show board id in ethtool driver information")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
icosq_str size is unnecessarily too long, and it causes a build warning
-Wformat-truncation with W=1. Looking closely, It doesn't need to be 255B,
hence this patch reduces the size to 32B which should be more than enough
to host the string: "ICOSQ: 0x%x, ".
While here, add a missing space in the formatted string.
This fixes the following build warning:
$ KCFLAGS='-Wall -Werror'
$ make O=/tmp/kbuild/linux W=1 -s -j12 drivers/net/ethernet/mellanox/mlx5/core/
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c: In function 'mlx5e_reporter_rx_timeout':
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:718:56:
error: ', CQ: 0x' directive output may be truncated writing 8 bytes into a region of size between 0 and 255 [-Werror=format-truncation=]
718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
| ^~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:717:9: note: 'snprintf' output between 43 and 322 bytes into a destination of size 288
717 | snprintf(err_str, sizeof(err_str),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
719 | rq->ix, icosq_str, rq->rqn, rq->cq.mcq.cqn);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 521f31af004a ("net/mlx5e: Allow RQ outside of channel context")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-14-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Without increased buffer size, will trigger -Wformat-truncation with W=1
for the snprintf operation writing to the buffer.
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c: In function 'mlx5_irq_alloc':
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:296:7: error: '@pci:' directive output may be truncated writing 5 bytes into a region of size between 1 and 32 [-Werror=format-truncation=]
296 | "%s@pci:%s", name, pci_name(dev->pdev));
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:295:2: note: 'snprintf' output 6 or more bytes (assuming 37) into a destination of size 32
295 | snprintf(irq->name, MLX5_MAX_IRQ_NAME,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
296 | "%s@pci:%s", name, pci_name(dev->pdev));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: ada9f5d00797 ("IB/mlx5: Fix eq names to display nicely in /proc/interrupts")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-13-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, mlx5e_ptp_poll_ts_cq would update the device doorbell with the
incremented consumer index after the relevant software counters in the
kernel were updated. In the mlx5e_sq_xmit_wqe context, this would lead to
either overrunning the device CQ or exceeding the expected software buffer
size in the device CQ if the device CQ size was greater than the software
buffer size. Update the relevant software counter only after updating the
device CQ consumer index in the port timestamping napi_poll context.
Log:
mlx5_core 0000:08:00.0: cq_err_event_notifier:517:(pid 0): CQ error on CQN 0x487, syndrome 0x1
mlx5_core 0000:08:00.0 eth2: mlx5e_cq_error_event: cqn=0x000487 event=0x04
Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure the skb is available in metadata mapping to skbs before tracking the
metadata index for detecting undelivered CQEs. If the metadata index is put
in the tracking list before putting the skb in the map, the metadata index
might be used for detecting undelivered CQEs before the relevant skb is
available in the map, which can lead to a null-ptr-deref.
Log:
general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 0 PID: 1243 Comm: kworker/0:2 Not tainted 6.6.0-rc4+ #108
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: events mlx5e_rx_dim_work [mlx5_core]
RIP: 0010:mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core]
Code: 8c 24 38 cc ff ff 4c 8d 3c c1 4c 89 f9 48 c1 e9 03 42 80 3c 31 00 0f 85 97 0f 00 00 4d 8b 3f 49 8d 7f 28 48 89 f9 48 c1 e9 03 <42> 80 3c 31 00 0f 85 8b 0f 00 00 49 8b 47 28 48 85 c0 0f 84 05 07
RSP: 0018:ffff8884d3c09c88 EFLAGS: 00010206
RAX: 0000000000000069 RBX: ffff8881160349d8 RCX: 0000000000000005
RDX: ffffed10218f48cf RSI: 0000000000000004 RDI: 0000000000000028
RBP: ffff888122707700 R08: 0000000000000001 R09: ffffed109a781383
R10: 0000000000000003 R11: 0000000000000003 R12: ffff88810c7a7a40
R13: ffff888122707700 R14: dffffc0000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8884d3c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4f878dd6e0 CR3: 000000014d108002 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
? die_addr+0x3c/0xa0
? exc_general_protection+0x144/0x210
? asm_exc_general_protection+0x22/0x30
? mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core]
? mlx5e_ptp_napi_poll+0x8f6/0x2290 [mlx5_core]
__napi_poll.constprop.0+0xa4/0x580
net_rx_action+0x460/0xb80
? _raw_spin_unlock_irqrestore+0x32/0x60
? __napi_poll.constprop.0+0x580/0x580
? tasklet_action_common.isra.0+0x2ef/0x760
__do_softirq+0x26c/0x827
irq_exit_rcu+0xc2/0x100
common_interrupt+0x7f/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:__kmem_cache_alloc_node+0xb/0x330
Code: 41 5d 41 5e 41 5f c3 8b 44 24 14 8b 4c 24 10 09 c8 eb d5 e8 b7 43 ca 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 <41> 56 41 89 d6 41 55 41 89 f5 41 54 49 89 fc 53 48 83 e4 f0 48 83
RSP: 0018:ffff88812c4079c0 EFLAGS: 00000246
RAX: 1ffffffff083c7fe RBX: ffff888100042dc0 RCX: 0000000000000218
RDX: 00000000ffffffff RSI: 0000000000000dc0 RDI: ffff888100042dc0
RBP: ffff88812c4079c8 R08: ffffffffa0289f96 R09: ffffed1025880ea9
R10: ffff888138839f80 R11: 0000000000000002 R12: 0000000000000dc0
R13: 0000000000000100 R14: 000000000000008c R15: ffff8881271fc450
? cmd_exec+0x796/0x2200 [mlx5_core]
kmalloc_trace+0x26/0xc0
cmd_exec+0x796/0x2200 [mlx5_core]
mlx5_cmd_do+0x22/0xc0 [mlx5_core]
mlx5_cmd_exec+0x17/0x30 [mlx5_core]
mlx5_core_modify_cq_moderation+0x139/0x1b0 [mlx5_core]
? mlx5_add_cq_to_tasklet+0x280/0x280 [mlx5_core]
? lockdep_set_lock_cmp_fn+0x190/0x190
? process_one_work+0x659/0x1220
mlx5e_rx_dim_work+0x9d/0x100 [mlx5_core]
process_one_work+0x730/0x1220
? lockdep_hardirqs_on_prepare+0x400/0x400
? max_active_store+0xf0/0xf0
? assign_work+0x168/0x240
worker_thread+0x70f/0x12d0
? __kthread_parkme+0xd1/0x1d0
? process_one_work+0x1220/0x1220
kthread+0x2d9/0x3b0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_ib ib_uverbs ib_core zram zsmalloc mlx5_core fuse
---[ end trace 0000000000000000 ]---
Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-11-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_sq_xmit_wqe
When SQ is a port timestamping SQ for PTP, do not access tx flags of skb
after free-ing the skb. Free the skb only after all references that depend
on it have been handled in the dropped WQE path.
Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-10-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As IPSec packet offload in switchdev mode is not supported with LAG,
it's unnecessary to modify those sent-to-vport rules to the peer eswitch.
Fixes: c6c2bf5db4ea ("net/mlx5e: Support IPsec packet offload for TX in switchdev mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-9-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Referenced commit addressed endianness issue in mlx5 pedit implementation
in ad hoc manner instead of systematically treating integer values
according to their types which left pedit fields of sizes not equal to 4
and where the bytes being modified are not least significant ones broken on
big endian machines since wrong bits will be consumed during parsing which
leads to following example error when applying pedit to source and
destination MAC addresses:
[Wed Oct 18 12:52:42 2023] mlx5_core 0001:00:00.1 p1v3_r: attempt to offload an unsupported field (cmd 0)
[Wed Oct 18 12:52:42 2023] mask: 00000000330c5b68: 00 00 00 00 ff ff 00 00 00 00 ff ff 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 0000000017d22fd9: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 000000008186d717: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 0000000029eb6149: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 000000007ed103e4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 00000000db8101a6: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 00000000ec3c08a9: 00 00 00 00 00 00 00 00 00 00 00 00 ............
Treat masks and values of pedit and filter match as network byte order,
refactor pointers to them to void pointers instead of confusing u32
pointers and only cast to pointer-to-integer when reading a value from
them. Treat pedit mlx5_fields->field_mask as host byte order according to
its type u32, change the constants in fields array accordingly.
Fixes: 82198d8bcdef ("net/mlx5e: Fix endianness when calculating pedit mask first bit")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow up to the previous patch to fix the same issue for
mlx5e_tc_tun_update_header_ipv4{6} when mlx5_packet_reformat_alloc()
fails.
When mlx5_packet_reformat_alloc() fails, the encap_header allocated in
mlx5e_tc_tun_update_header_ipv4{6} will be released within it. However,
e->encap_header is already set to the previously freed encap_header
before mlx5_packet_reformat_alloc(). As a result, the later
mlx5e_encap_put() will free e->encap_header again, causing a double free
issue.
mlx5e_encap_put()
--> mlx5e_encap_dealloc()
--> kfree(e->encap_header)
This patch fix it by not setting e->encap_header until
mlx5_packet_reformat_alloc() success.
Fixes: a54e20b4fcae ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-7-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When mlx5_packet_reformat_alloc() fails, the encap_header allocated in
mlx5e_tc_tun_create_header_ipv4{6} will be released within it. However,
e->encap_header is already set to the previously freed encap_header
before mlx5_packet_reformat_alloc(). As a result, the later
mlx5e_encap_put() will free e->encap_header again, causing a double free
issue.
mlx5e_encap_put()
--> mlx5e_encap_dealloc()
--> kfree(e->encap_header)
This happens when cmd: MLX5_CMD_OP_ALLOC_PACKET_REFORMAT_CONTEXT fail.
This patch fix it by not setting e->encap_header until
mlx5_packet_reformat_alloc() success.
Fixes: d589e785baf5e ("net/mlx5e: Allow concurrent creation of encap entries")
Reported-by: Cruz Zhao <cruzzhao@linux.alibaba.com>
Reported-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When running a phase adjustment operation, the free running clock should
not be modified at all. The phase control keyword is intended to trigger an
internal servo on the device that will converge to the provided delta. A
free running counter cannot implement phase adjustment.
Fixes: 8e11a68e2e8a ("net/mlx5: Add adjphase function to support hardware-only offset control")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current check isn't aware of old devices that don't have the
relevant FW capability. This patch allows multi destination FTE
in old cards, as it was before this check.
Fixes: f6f46e7173cb ("net/mlx5: DR, Add check for multi destination FTE")
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-4-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each EQ table maintains a cpumask of the already used CPUs that are mapped
to IRQs to ensure that each IRQ gets mapped to a unique CPU.
However, on IRQ release, the said cpumask is not updated by clearing the
CPU from the mask to allow future IRQ request, causing the following
error when a SF is reloaded after it has utilized all CPUs for its IRQs:
mlx5_irq_affinity_request:135:(pid 306010): Didn't find a matching IRQ.
err = -28
Thus, when releasing an IRQ, clear its mapped CPU from the used CPUs
mask, to prevent the case described above.
While at it, move the used cpumask update to the EQ layer as it is more
fitting and preserves symmetricity of the IRQ request/release API.
Fixes: a1772de78d73 ("net/mlx5: Refactor completion IRQ request/release API")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 95c337cce0e11d06a715da73e6796ade9216637f.
The revert is required due to the suspicion it cause some tests
fail and will be moved to further investigation.
Fixes: 95c337cce0e1 ("net/mlx5: DR, Supporting inline WQE when possible")
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netpoll will explicilty pass the polling call with a budget of 0 to
indicate it's clearing the Tx path only. For the gve_rx_poll and
gve_xdp_poll, they were mistakenly taking the 0 budget as the indication
to do all the work. Add check to avoid the rx path and xdp path being
called when budget is 0. And also avoid napi_complete_done being called
when budget is 0 for netpoll.
Fixes: f5cedc84a30d ("gve: Add transmit and receive support")
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Link: https://lore.kernel.org/r/20231114004144.2022268-1-ziweixiao@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-11-13 (ice)
This series contains updates to ice driver only.
Arkadiusz ensures the device is initialized with valid lock status
value. He also removes range checking of dpll priority to allow firmware
to process the request; supported values are firmware dependent.
Finally, he removes setting of can change capability for pins that
cannot be changed.
Dan restores ability to load a package which doesn't contain a signature
segment.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: fix DDP package download for packages without signature segment
ice: dpll: fix output pin capabilities
ice: dpll: fix check for dpll input priority range
ice: dpll: fix initial lock status of dpll
====================
Link: https://lore.kernel.org/r/20231113230551.548489-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Our friendly kernel test robot pointed out a couple of potential
string truncation issues. None of which were we worried about,
but can be relatively easily fixed to quiet the complaints.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310211736.66syyDpp-lkp@intel.com/
Fixes: 45d76f492938 ("pds_core: set up device and adminq")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231113183257.71110-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the qcq's interrupt index, not the irq number, to mask
the interrupt. Since the irq number can be out of range from
the number of possible interrupts, we can end up accessing
and potentially scribbling on out-of-range and/or unmapped
memory, making the kernel angry.
[ 3116.039364] BUG: unable to handle page fault for address: ffffbeea1c3edf84
[ 3116.047059] #PF: supervisor write access in kernel mode
[ 3116.052895] #PF: error_code(0x0002) - not-present page
[ 3116.058636] PGD 100000067 P4D 100000067 PUD 1001f2067 PMD 10f82e067 PTE 0
[ 3116.066221] Oops: 0002 [#1] SMP NOPTI
[ 3116.092948] RIP: 0010:iowrite32+0x9/0x76
[ 3116.190452] Call Trace:
[ 3116.193185] <IRQ>
[ 3116.195430] ? show_trace_log_lvl+0x1d6/0x2f9
[ 3116.200298] ? show_trace_log_lvl+0x1d6/0x2f9
[ 3116.205166] ? pdsc_adminq_isr+0x43/0x55 [pds_core]
[ 3116.210618] ? __die_body.cold+0x8/0xa
[ 3116.214806] ? page_fault_oops+0x16d/0x1ac
[ 3116.219382] ? exc_page_fault+0xbe/0x13b
[ 3116.223764] ? asm_exc_page_fault+0x22/0x27
[ 3116.228440] ? iowrite32+0x9/0x76
[ 3116.232143] pdsc_adminq_isr+0x43/0x55 [pds_core]
[ 3116.237627] __handle_irq_event_percpu+0x3a/0x184
[ 3116.243088] handle_irq_event+0x57/0xb0
[ 3116.247575] handle_edge_irq+0x87/0x225
[ 3116.252062] __common_interrupt+0x3e/0xbc
[ 3116.256740] common_interrupt+0x7b/0x98
[ 3116.261216] </IRQ>
[ 3116.263745] <TASK>
[ 3116.266268] asm_common_interrupt+0x22/0x27
Reported-by: Joao Martins <joao.m.martins@oracle.com>
Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231113183257.71110-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tg3_tso_bug() drops a packet if it cannot be segmented for any reason.
The number of discarded frames should be incremented accordingly.
Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com>
Signed-off-by: Vincent Wong <vincent.wong2@spacex.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20231113182350.37472-2-alexey.pakhunov@spacex.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This change moves [rt]x_dropped counters to tg3_napi so that they can be
updated by a single writer, race-free.
Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com>
Signed-off-by: Vincent Wong <vincent.wong2@spacex.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231113182350.37472-1-alexey.pakhunov@spacex.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dma_rx_size can be set as low as 64. Rx budget might be higher than
that. Make sure to not overrun allocated rx buffers when budget is
larger.
Leave one descriptor unused to avoid wrap around of 'dirty_rx' vs
'cur_rx'.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Link: https://lore.kernel.org/r/d95413e44c97d4692e72cec13a75f894abeb6998.1699897370.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The while loop condition verifies 'count < limit'. Neither value change
before the 'count >= limit' check. As is this check is dead code. But
code inspection reveals a code path that modifies 'count' and then goto
'drain_data' and back to 'read_again'. So there is a need to verify
count value sanity after 'read_again'.
Move 'read_again' up to fix the count limit check.
Fixes: ec222003bd94 ("net: stmmac: Prepare to add Split Header support")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/d9486296c3b6b12ab3a0515fcd47d56447a07bfc.1699897370.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Device that support DASH may be reseted or powered off during suspend.
So driver needs to handle DASH during system suspend and resume. Or
DASH firmware will influence device behavior and causes network lost.
Fixes: b646d90053f8 ("r8169: magic.")
Cc: stable@vger.kernel.org
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: ChunHao Lin <hau@realtek.com>
Link: https://lore.kernel.org/r/20231109173400.4573-3-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For devices that support DASH, even DASH is disabled, there may still
exist a default firmware that will influence device behavior.
So driver needs to handle DASH for devices that support DASH, no
matter the DASH status is.
This patch also prepares for "fix network lost after resume on DASH
systems".
Fixes: ee7a1beb9759 ("r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware dash function is enabled")
Cc: stable@vger.kernel.org
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20231109173400.4573-2-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RX max frame size is over 10000 for the Gemini ethernet,
but the TX max frame size is actually just 2047 (0x7ff after
checking the datasheet). Reflect this in what we offer to Linux,
cap the MTU at the TX max frame minus ethernet headers.
We delete the code disabling the hardware checksum for large
MTUs as netdev->mtu can no longer be larger than
netdev->max_mtu meaning the if()-clause in gmac_fix_features()
is never true.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-3-6e611528db08@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Gemini ethernet controller provides hardware checksumming
for frames up to 1514 bytes including ethernet headers but not
FCS.
If we start sending bigger frames (after first bumping up the MTU
on both interfaces sending and receiving the frames), truncated
packets start to appear on the target such as in this tcpdump
resulting from ping -s 1474:
23:34:17.241983 14:d6:4d:a8:3c:4f (oui Unknown) > bc:ae:c5:6b:a8:3d (oui Unknown),
ethertype IPv4 (0x0800), length 1514: truncated-ip - 2 bytes missing!
(tos 0x0, ttl 64, id 32653, offset 0, flags [DF], proto ICMP (1), length 1502)
OpenWrt.lan > Fecusia: ICMP echo request, id 1672, seq 50, length 1482
If we bypass the hardware checksumming and provide a software
fallback, everything starts working fine up to the max TX MTU
of 2047 bytes, for example ping -s2000 192.168.1.2:
00:44:29.587598 bc:ae:c5:6b:a8:3d (oui Unknown) > 14:d6:4d:a8:3c:4f (oui Unknown),
ethertype IPv4 (0x0800), length 2042:
(tos 0x0, ttl 64, id 51828, offset 0, flags [none], proto ICMP (1), length 2028)
Fecusia > OpenWrt.lan: ICMP echo reply, id 1683, seq 4, length 2008
The bit enabling to bypass hardware checksum (or any of the
"TSS" bits) are undocumented in the hardware reference manual.
The entire hardware checksum unit appears undocumented. The
conclusion that we need to use the "bypass" bit was found by
trial-and-error.
Since no hardware checksum will happen, we slot in a software
checksum fallback.
Check for the condition where we need to compute checksum on the
skb with either hardware or software using == CHECKSUM_PARTIAL instead
of != CHECKSUM_NONE which is an incomplete check according to
<linux/skbuff.h>.
On the D-Link DIR-685 router this fixes a bug on the conduit
interface to the RTL8366RB DSA switch: as the switch needs to add
space for its tag it increases the MTU on the conduit interface
to 1504 and that means that when the router sends packages
of 1500 bytes these get an extra 4 bytes of DSA tag and the
transfer fails because of the erroneous hardware checksumming,
affecting such basic functionality as the LuCI web interface.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-2-6e611528db08@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enumerator 3 is 1548 bytes according to the datasheet.
Not 1542.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-1-6e611528db08@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 3cbdb0343022 ("ice: Add support for E830 DDP package segment")
incorrectly removed support for package download for packages without a
signature segment. These packages include the signature buffer inline
in the configurations buffers, and not in a signature segment.
Fix package download by providing download support for both packages
with (ice_download_pkg_with_sig_seg()) and without signature segment
(ice_download_pkg_without_sig_seg()).
Fixes: 3cbdb0343022 ("ice: Add support for E830 DDP package segment")
Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Closes: https://lore.kernel.org/netdev/ZUT50a94kk2pMGKb@boxer/
Tested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The dpll output pins which are used to feed clock signal of PHY and MAC
circuits cannot be disconnected, those integrated circuits require clock
signal for operation.
By stopping assignment of DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE pin
capability, prevent the user from invoking the state set callback on
those pins, setting the state on those pins already returns error, as
firmware doesn't allow the change of their state.
Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu")
Fixes: 8a3a565ff210 ("ice: add admin commands to access cgu configuration")
Reviewed-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Supported priority value for input pins may differ with regard of NIC
firmware version. E810T NICs with 3.20/4.00 FW versions would accept
priority range 0-31, where firmware 4.10+ would support the range 0-9
and extra value of 255.
Remove the in-range check as the driver has no information on supported
values from the running firmware, let firmware decide if given value is
correct and return extack error if the value is not supported.
Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When dpll device is registered and dpll subsystem performs notify of a
new device, the lock state value provided to dpll subsystem equals 0
which is invalid value for the `enum dpll_lock_status`.
Provide correct value by obtaining it from firmware before registering
the dpll device.
Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Calling page_pool_get_stats in the mvneta driver without checks
leads to kernel crashes.
First the page pool is only available if the bm is not used.
The page pool is also not allocated when the port is stopped.
It can also be not allocated in case of errors.
The current implementation leads to the following crash calling
ethstats on a port that is down or when calling it at the wrong moment:
ble to handle kernel NULL pointer dereference at virtual address 00000070
[00000070] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Hardware name: Marvell Armada 380/385 (Device Tree)
PC is at page_pool_get_stats+0x18/0x1cc
LR is at mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta]
pc : [<c0b413cc>] lr : [<bf0a98d8>] psr: a0000013
sp : f1439d48 ip : f1439dc0 fp : 0000001d
r10: 00000100 r9 : c4816b80 r8 : f0d75150
r7 : bf0b400c r6 : c238f000 r5 : 00000000 r4 : f1439d68
r3 : c2091040 r2 : ffffffd8 r1 : f1439d68 r0 : 00000000
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 066b004a DAC: 00000051
Register r0 information: NULL pointer
Register r1 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390
Register r2 information: non-paged memory
Register r3 information: slab kmalloc-2k start c2091000 pointer offset 64 size 2048
Register r4 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390
Register r5 information: NULL pointer
Register r6 information: slab kmalloc-cg-4k start c238f000 pointer offset 0 size 4096
Register r7 information: 15-page vmalloc region starting at 0xbf0a8000 allocated at load_module+0xa30/0x219c
Register r8 information: 1-page vmalloc region starting at 0xf0d75000 allocated at ethtool_get_stats+0x138/0x208
Register r9 information: slab task_struct start c4816b80 pointer offset 0
Register r10 information: non-paged memory
Register r11 information: non-paged memory
Register r12 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390
Process snmpd (pid: 733, stack limit = 0x38de3a88)
Stack: (0xf1439d48 to 0xf143a000)
9d40: 000000c0 00000001 c238f000 bf0b400c f0d75150 c4816b80
9d60: 00000100 bf0a98d8 00000000 00000000 00000000 00000000 00000000 00000000
9d80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9da0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9dc0: 00000dc0 5335509c 00000035 c238f000 bf0b2214 01067f50 f0d75000 c0b9b9c8
9de0: 0000001d 00000035 c2212094 5335509c c4816b80 c238f000 c5ad6e00 01067f50
9e00: c1b0be80 c4816b80 00014813 c0b9d7f0 00000000 00000000 0000001d 0000001d
9e20: 00000000 00001200 00000000 00000000 c216ed90 c73943b8 00000000 00000000
9e40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9e60: 00000000 c0ad9034 00000000 00000000 00000000 00000000 00000000 00000000
9e80: 00000000 00000000 00000000 5335509c c1b0be80 f1439ee4 00008946 c1b0be80
9ea0: 01067f50 f1439ee3 00000000 00000046 b6d77ae0 c0b383f0 00008946 becc83e8
9ec0: c1b0be80 00000051 0000000b c68ca480 c7172d00 c0ad8ff0 f1439ee3 cf600e40
9ee0: 01600e40 32687465 00000000 00000000 00000000 01067f50 00000000 00000000
9f00: 00000000 5335509c 00008946 00008946 00000000 c68ca480 becc83e8 c05e2de0
9f20: f1439fb0 c03002f0 00000006 5ac3c35a c4816b80 00000006 b6d77ae0 c030caf0
9f40: c4817350 00000014 f1439e1c 0000000c 00000000 00000051 01000000 00000014
9f60: 00003fec f1439edc 00000001 c0372abc b6d77ae0 c0372abc cf600e40 5335509c
9f80: c21e6800 01015c9c 0000000b 00008946 00000036 c03002f0 c4816b80 00000036
9fa0: b6d77ae0 c03000c0 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000
9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0
9fe0: b6dbf738 becc838c b6d186d7 b6baa858 40000030 0000000b 00000000 00000000
page_pool_get_stats from mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta]
mvneta_ethtool_get_stats [mvneta] from ethtool_get_stats+0x154/0x208
ethtool_get_stats from dev_ethtool+0xf48/0x2480
dev_ethtool from dev_ioctl+0x538/0x63c
dev_ioctl from sock_ioctl+0x49c/0x53c
sock_ioctl from sys_ioctl+0x134/0xbd8
sys_ioctl from ret_fast_syscall+0x0/0x1c
Exception stack(0xf1439fa8 to 0xf1439ff0)
9fa0: 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000
9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0
9fe0: b6dbf738 becc838c b6d186d7 b6baa858
Code: e28dd004 e1a05000 e2514000 0a00006a (e5902070)
This commit adds the proper checks before calling page_pool_get_stats.
Fixes: b3fc79225f05 ("net: mvneta: add support for page_pool_get_stats")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Reported-by: Paulo Da Silva <Paulo.DaSilva@kyberna.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If PF is down, firmware will returns 10 Mbit/s rate and half-duplex mode
when PF queries the port information from firmware.
After imp reset command is executed, PF status changes to down,
and PF will query link status and updates port information
from firmware in a periodic scheduled task.
However, there is a low probability that port information is updated
when PF is down, and then PF link status changes to up.
In this case, PF synchronizes incorrect rate and duplex mode to VF.
This patch fixes it by updating port information before
PF synchronizes the rate and duplex to the VF
when PF changes to up.
Fixes: 18b6e31f8bf4 ("net: hns3: PF add support for pushing link status to VFs")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the reset process in hns3 and firmware watchdog init process is
asynchronous. We think firmware watchdog initialization is completed
before VF clear the interrupt source. However, firmware initialization
may not complete early. So VF will receive multiple reset interrupts
and fail to reset.
So we add delay before VF interrupt source and 5 ms delay
is enough to avoid second reset interrupt.
Fixes: 427900d27d86 ("net: hns3: fix the timing issue of VF clearing interrupt sources")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a VF is calling hns3_init_mac_addr(), get_mac_addr() may
return fail, then the value of mac_addr_temp is not initialized.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
debugfs
The hns3 driver define an array of string to show the coalesce
info, but if the kernel adds a new mode or a new state,
out-of-bounds access may occur when coalesce info is read via
debugfs, this patch fix the problem.
Fixes: c99fead7cb07 ("net: hns3: add debugfs support for interrupt coalesce")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
