summaryrefslogtreecommitdiff
path: root/drivers/net/sky2.h
AgeCommit message (Collapse)AuthorFilesLines
2011-08-12skge/sky2/mv643xx/pxa168: Move the Marvell Ethernet driversJeff Kirsher1-2427/+0
Move the Marvell Ethernet drivers into drivers/net/ethernet/marvell/ and make the necessary Kconfig and Makefile changes. CC: Sachin Sanap <ssanap@marvell.com> CC: Zhangfei Gao <zgao6@marvell.com> CC: Philip Rakity <prakity@marvell.com> CC: Mark Brown <markb@marvell.com> CC: Lennert Buytenhek <buytenh@marvell.com> CC: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-08sky2: support for new Optima chipsets (EXPERIMENTAL)stephen hemminger1-2/+6
This is a backport from the vendor driver of support for the newer Optima (Prime and 2) chipsets. It also includes some setup changes for the current Optima chip as well. The code and comments intentionally mirror the vendor sk98lin driver to allow for easier maintenance. Although this adds support for new chip id's, these chip id's are not used by any of the current PCI device id's listed in the driver. The patch is just to get initial infrastructure in place to handle them when they come. I don't have access to any of this hardware to actually test it yet. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08sky2: use correct Inter Packet Gap at 10/100mbitstephen hemminger1-3/+4
This is another fix picked out of the vendor driver. The IPG value in the serial mode register is supposed to be programmed differently at lower speeds. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08sky2: force receive checksum when using RSS on some hardware (v2)stephen hemminger1-0/+1
Found when reviewing the vendor driver. Apparently some chip versions require receive checksumming to be enabled in order for RSS to work. Also, if fix_features has to change some settings; put in message in log in similar manner to netdev_fix_features. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13net: sky2: convert to hw_featuresMichał Mirosław1-1/+0
Caveats: - driver modifies vlan_features on HW VLAN TX changes - broken RX checksum will be reenabled on features change Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31Fix common misspellingsLucas De Marchi1-3/+3
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-01-10sky2: convert to new VLAN model (v0.2)Stephen Hemminger1-4/+2
This converts sky2 to new VLAN offload flags control via ethtool. It also allows for transmit offload of vlan tagged frames which was not possible before. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-02sky2: implement 64 bit statsstephen hemminger1-0/+42
This implements 64 bit statistics support and fixes races when reading counter values. The PHY counters can only be accessed 16 bits at a time, so they are subject to carry races. NB: * TX/RX counters are maintained in software because the the hardware packet count is only a 32 bit value. * Error counters are really only 32 bit. * Old 32 bit counter fields in dev->stats still used for some software counters Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03drivers/net: use __packed annotationEric Dumazet1-3/+3
cleanup patch. Use new __packed annotation in drivers/net/ Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sky2: use the DMA state API instead of the pci equivalentsFUJITA Tomonori1-3/+3
This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-25sky2: add support for receive hashingStephen Hemminger1-0/+14
Sky2 hardware supports hardware receive hash calculation. Now that Receive Packet Steering is available, add support to enable it. This version does not depend on CONFIG_RPS. Also set_flags rejects all values except RXHASH, so driver won't have to change next time somebody adds a new one. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23sky2: size status ring based on Tx/Rx ringstephen hemminger1-0/+1
Sky2 status ring must be big enough to handle worst case number of status messages. It was being oversized (to handle dual port cards), and excessive number of tx ring entries were allowed. This patch reduces the footprint and makes sure the value is enough. Later patch to add RSS increases the number of possible Rx status elements. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-31sky2: add XL revisionsstephen hemminger1-0/+8
Add definitions for Yukon XL revisions. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-31sky2: support Yukon EC_U rev B1 and laterstephen hemminger1-4/+8
Need to change logic to support later versions of Yukon 2 EC_U chip. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-13sky2: jumbo packet changesstephen hemminger1-4/+4
Change how FIFO is programmed in jumbo mode (to match vendor driver). Mostly cosmetic, the only register change is that the bits 22,23 are not programemd used. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03sky2: Fix TX_MAP_PAGE misspellingJarek Poplawski1-1/+1
Btw of the dma-debug problem reported by Michael Breuer I spotted a tiny misspelling in TX_MAP_PAGE definition introduced by commit 6b84dacadbdc3. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-30sky2: fix receive pause thresholdsStephen Hemminger1-3/+4
Program the receive pause thresholds differently depending on chip version. This cloned from from the vendor (GPL) driver. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-30sky2: add register definitions for new chipsStephen Hemminger1-1/+177
This adds infrastructure for the newer chip versions and workarounds. Extracted from the vendor (GPL) driver. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-02sky2: irqname based on pci addressStephen Hemminger1-0/+2
This is based on Michal Schmidt fix for skge. Most network drivers request their IRQ when the interface is activated. sky2 does it in ->probe() instead, because it can work with two-port cards where the two net_devices use the same IRQ. This works fine most of the time, except in some situations when the interface gets renamed. Consider this example: 1. modprobe sky2 The card is detected as eth0 and requests IRQ 17. Directory /proc/irq/17/eth0 is created. 2. There is an udev rule which says this interface should be called eth1, so udev renames eth0 -> eth1. 3. modprobe 8139too The Realtek card is detected as eth0. It will be using IRQ 17 too. 4. ip link set eth0 up Now 8139too requests IRQ 17. The result is: WARNING: at fs/proc/generic.c:590 proc_register ... proc_dir_entry '17/eth0' already registered The fix is for sky2 to name the irq based on the pci device, as is done by some other devices DRM, infiniband, ... ie. sky2@pci:0000:00:00 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02sky2: Use 32bit read to read Y2_VAUX_AVAILMike McCormack1-1/+1
B0_CTST is a 24bit register according to the vendor driver (sk98lin). A 16bit read on B0_CTST will always return 0 for Y2_VAUX_AVAIL (1<<16), so use a 32bit read when testing Y2_VAUX_AVAIL Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02sky2: fix management of driver LEDStephen Hemminger1-8/+1
Observed by Mike McCormack. The LED bit here is just a software controlled value used to turn on one of the LED's on some boards. The register value was wrong, which could have been causing some power control issues. Get rid of problematic define use the correct mask. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-19sky2: no recyclingStephen Hemminger1-1/+0
Recycling turns out to be a bad idea! For most use cases, the packet can not be reused: TCP packets are cloned. Even for the ideal case of forwarding, it hurts performance because of CPU ping/pong. On a multi-core system forwarding of 64 byte packets is worse much worse: recycling = 24% forwarded vs no recycling = 42% forwarded Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-19sky2: optimize transmit completionStephen Hemminger1-0/+3
Don't reference the list element in hardware transmit ring on transmit completion. The list element is updated by hardware, therefore it causes a cache miss. Do book keeping in software structure. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-19sky2: dynamic size transmit ringStephen Hemminger1-0/+1
Allocate and size transmit ring based on parameters. Saves excess space and allows configuring larger rings for testing. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-19sky2: transmit ring 64 bit conservationStephen Hemminger1-0/+1
This patch saves elements on transmit ring by only updating the upper 64 bit address when it changes. With many workloads skb's are located in same region, so it saves space. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15sky2: remove restarting workaround flagStephen Hemminger1-1/+0
The whole restarting flag was introduced by Mike McCormack and was a temporary duct tape patch around issues with transmits inflight during restart. The problems it was covering are now fixed and the code should have been reverted. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15sky2: fix pause negotiationStephen Hemminger1-7/+9
The sky2 driver combines auto speed negotiation with automatic negotiation of pause parameters; but the ethtool interface expects them to be split. This patch allows autonegotiation to be used for speed, but manually disable flow control. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-04sky2: Avoid transmits during sky2_down()Mike McCormack1-0/+1
This patch supersedes my previous patch "sky2: Avoid transmitting during sky2_restart". I have reworked the patch to avoid crashes during both sky2_restart() and sky2_set_ringparam(). Without this patch, the sky2 driver can be crashed by doing: # pktgen eth1 & (transmit many packets on eth1) # ethtool -G eth1 tx 510 I am aware you object to storing extra state, but I can't see a way around this. Without remembering that we're restarting, netif_wake_queue() is called in the ISR from sky2_tx_complete(), and netif_tx_lock() is used in sky2_tx_done(). If anybody can see a way around this, please let me know. Signed-off-by: Mike McCormack <mikem@ring3k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18sky2: skb recyclingStephen Hemminger1-0/+1
This patch implements skb recycling. It reclaims transmitted skb's for use in the receive ring. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07sky2: fix PM related regressionsStephen Hemminger1-2/+0
Fix the problems reported for 2.6.27-rc1 caused by over aggressive power management. Turning clock off on PCI Express is problematic for WOL, and when doing multi-booting. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-18sky2: 88E8057 chip supportStephen Hemminger1-0/+1
Add support for Yukon 2 Ultra 2 chip set (88E8057) based on code in latest version of vendor driver (sk98lin 10.60.2.3). Untested on real hardware. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31sky2: pci power savingsStephen Hemminger1-1/+15
Turn on special bits to save more power when device is shutdown. Tested on a limited range of hardware, some of the bits are for hardware that probably isn't even in production (like Yukon Supreme) and was ported from the vendor driver. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-31sky2: put PHY in sleep when downStephen Hemminger1-0/+7
Put PHY int sleep mode (from vendor sk98lin 10.50 driver) when the network device is brought down. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13sky2: fix simple define thinkoJesse Brandeburg1-2/+2
noticed while browsing code, apparent thinko. compile tested only. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-02-24sky2: fix LED managementStephen Hemminger1-12/+15
Fix problems in LED management, so ethtool -p works correctly on Yukon-EC and other chips. The driver was incorrectly setting the PHY LED overide bits. Moral: read the spec sheet, not the vendor driver. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-05sky2: fix for Yukon FE (regression in 2.6.25)Stephen Hemminger1-1/+1
The Yukon FE chip has a ram buffer therefore it needs the alignment restriction and hang check workarounds. Therefore: * Autodetect the prescence/absence of ram buffer * Rename the flag value to reflect this * Use it consistently (ie don't reread register) Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-29sky2: support for Yukon SupremeStephen Hemminger1-6/+7
Add support from sk98lin vendor driver 10.50.1.3 for 88E8055 and 88E8075 chips. I don't have this hardware to test, so this changes are untested. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-13sky2: large memory workaround.Stephen Hemminger1-2/+2
This patch might fix problems with 4G or more of memory. It stops the driver from doing a small optimization for Tx and Rx, and instead always sets the high-page on tx/rx descriptors. Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9725 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-02sky2: revert to access PCI config via device spaceStephen Hemminger1-0/+21
Using the hardware window into PCI config space is more reliable and smaller/faster than using the pci_config routines. It avoids issues with MMCONFIG etc. Reverts: 167f53d05fccb47b6eeadac7f6705b3f2f042d03 Please apply for 2.6.24 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-10sky2: handle advanced error recovery config issuesStephen Hemminger1-1/+2
The PCI AER support may not work for a couple of reasons. It may not be configured into the kernel or there may be a BIOS bug that prevents MMCONFIG from working. If MMCONFIG doesn't work then the PCI registers that control AER will not be accessible via pci_read_config functions; luckly there is another window to access PCI space in the device, so use that. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12[SKY2]: use netdevice stats structStephen Hemminger1-2/+0
Use builtin statistics structure from net device. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11sky2: use pci_config access functionsStephen Hemminger1-21/+0
Use the PCI layer config access functions. The driver was using the memory mapped window in device, to workaround issues accessing the advanced error reporting registers. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11sky2: advanced error reportingStephen Hemminger1-41/+0
Use the kernel interfaces for advanced error reporting. This should be cleaner and clear up errors on boot. For those systems with busted BIOS's that don't correctly support mmconfig, advanced error reporting will be disabled. The PCI registers for advanced error reporting start at 0x100 which is too large to be accessed by legacy functions. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11sky2: document GPHY_CTRL bitsStephen Hemminger1-0/+22
Add documentation of GPHY_CTRL register bits even if driver is not using them (yet). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11[NET]: Make NAPI polling independent of struct net_device objects.Stephen Hemminger1-0/+1
Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25sky2: be more selective about FIFO watchdogStephen Hemminger1-1/+1
Be more selective about when to enable the ram buffer watchdog code. It is unnecessary on XL A3 or later revs, and with Yukon FE the buffer is so small (4K) that the watchdog detects false positives. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-20sky2: receive FIFO checkingStephen Hemminger1-1/+8
A driver writer from another operating system hinted that the versions of Yukon 2 chip with rambuffer (EC and XL) have a hardware bug that if the FIFO ever gets completely full it will hang. Sounds like a classic ring full vs ring empty wrap around bug. As a workaround, use the existing watchdog timer to check for ring full lockup. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-20sky2: fe+ chip supportStephen Hemminger1-4/+14
Add support for newest Marvell chips. The Yukon FE plus chip is found in some not yet released laptops. Tested on hardware evaluation boards. This version of the patch is for 2.6.23. It supersedes the two previous patches that are sitting in netdev-2.6 (upstream branch). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-20sky2: reorganize chip revision featuresStephen Hemminger1-2/+10
This patch should cause no functional changes in driver behaviour. There are (too) many revisions of the Yukon 2 chip now. Instead of adding more conditionals based on chip revision; rerganize into a set of feature flags so adding new versions is less problematic. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-20sky2: fix VLAN receive processing (resend)Stephen Hemminger1-1/+1
The length check for truncated frames was not correctly handling the case where VLAN acceleration had already read the tag. Also, the Yukon EX has some features that use high bit of status as security tag. Signed-off-by: Pierre-Yves Ritschard <pyr@spootnik.org> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>