summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath.h
AgeCommit message (Collapse)AuthorFilesLines
2010-11-25ath: Add a driver_info bitmask fieldRajkumar Manoharan1-0/+6
The driver_info stores the device category information which is used to load appropriate device firmware, select firmware offset and eeprom starting location. The driver_info is accessed across ath9k_htc and ath9k_hw. Hence placed under common structure. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11ath9k_hw: move the cycle counter tracking to athFelix Fietkau1-0/+14
Instead of keeping track of wraparound, clear the counters on every access and keep separate deltas for ANI and later survey use. Also moves the function for calculating the 'listen time' for ANI Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11ath9k_hw: store the clock rate in common data on channel changesFelix Fietkau1-0/+2
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07ath9k_hw: clean up register write bufferingFelix Fietkau1-3/+1
Throughout the code, DISABLE_REGWRITE_BUFFER is always called right after REGWRITE_BUFFER_FLUSH. Since that's unlikely to change any time soon, that makes keeping those ops separate rather pointless, as it only increases code size and line number counts. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05ath9k: remove the noise floor value in the ani structFelix Fietkau1-1/+0
common->ani.noise_floor is now only used for a similar redundant debug message similar to the one that was removed from ath9k_htc in an earlier patch. Remove it from ath9k as well now. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-21ath/ath5k/ath9k: Fix crypto capabilities merge issueBruno Randolf1-7/+2
Fixing up a merge issue / concurrent development: Remove unneeded ath_crypt_caps flags, as per "ath9k_hw: remove useless hw capability flags" (364734fafbba0c3133e482db78149b9a823ae7a5), but set the AESCCM flag for ath9k. common ath code still needs a flag for this because there is ath5k hardware which can't do AES in hardware. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath/ath9k: Replace common->splitmic with a flagBruno Randolf1-1/+1
Replace common->splitmic with ATH_CRYPT_CAP_MIC_COMBINED flag. splitmic has to be used when the ATH_CRYPT_CAP_MIC_COMBINED capability flag is not set. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath: Copy key cache management functions from ath9k to athBruno Randolf1-0/+27
Copied the key cache management functions from ath9k (common.c and hw.c) to ath/key.c so we can use them from ath5k, later. Minor changes have been made: - renamed ath9k_* to ath_* - replaced ah->caps.keycache_size with common->keymax - removed ATH9K_IS_MIC_ENABLED since it is always true. - the AR_PCU_MIC_NEW_LOC_ENA flag is replaced with (splitmic == 0). Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16ath: Copy cryptographic capability flags into athBruno Randolf1-0/+10
This will be used later in this patch series. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-31ath9k: fix spurious MIC failure reportsFelix Fietkau1-0/+1
According to the hardware documentation, the MIC failure bit is only valid if the frame was decrypted using a valid TKIP key and is not a fragment. In some setups I've seen hardware-reported MIC failures on an AP that was configured for CCMP only, so it's clear that additional checks are necessary. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath: Add buffered register write operationsSujith1-1/+13
This is required to implement delayed/buffered register writes in ath9k_htc. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07ath: Add a bus type fieldSujith1-3/+10
This can be used to store the bus types ( AHB/PCI/USB ). Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01ath9k: fix access to freed data on unloadPavel Roskin1-1/+0
Calling ath_bus_cleanup() after ieee80211_free_hw() resulted in access to common->bus_ops, which is already freed as part of the device data. Remove the cleanup field in struct ath_bus_ops, as it was never used properly. Remove ath_bus_cleanup(). Merge cleanup functions in place of the ath_bus_cleanup() calls. Take care not to use any device data after ieee80211_free_hw(). Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-12ath9k: move driver keymap, keymax and splitmic to commonLuis R. Rodriguez1-0/+14
This will make sharing code easier between ath9k and ath9k_htc. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-12ath: move the rx bufsize to common to share with ath5k/ath9kLuis R. Rodriguez1-0/+2
This will also be used by ath9k_htc. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-12ath9k: move struct ath_ani to common areaLuis R. Rodriguez1-0/+12
This can be shared between ath9k and ath9k_htc. It will also help with sharing routine helpers on the RX path. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08ath9k: initialize hw prior to debugfsLuis R. Rodriguez1-0/+6
debugfs uses the hardware for several debugfs files as such the hardware must be initialized and available prior to its usage. The same applies to when we free the hw structs -- free debufs file entries prior to free'ing the hardware. Reported-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08atheros: define a common priv structLuis R. Rodriguez1-0/+1
hw code should never use private driver data, but sometimes we need a backpointer so just stuff it on the common ath struct. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08atheros: move bus ops to ath_commonLuis R. Rodriguez1-0/+10
This is the last part to make ath9k hw code core driver agnostic. I believe ath9k_htc can now use use the hw code unmodified. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08atheros: move tx/rx chainmask to ath_commonLuis R. Rodriguez1-0/+3
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08atheros: add common debug printingLuis R. Rodriguez1-0/+3
ath9k uses this for now, ath9k_htc is expected to re-use this as well. We lave ath5k as is, but it certainly can also be converted later. The ath9k module parameter and debugfs entry is kept. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08atheros: add ieee80211_hw to ath_commonLuis R. Rodriguez1-0/+2
Make use of it on hw code in ath9k to avoid using the ath9k ath_softc. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08atheros: define shared bssidmask settingLuis R. Rodriguez1-0/+3
Also make ath5k and ath9k use it, and share register definitions. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08ath5k: allocate ath5k_hw prior to initializing hwLuis R. Rodriguez1-1/+1
We can propagate better errors upon failed hw initialization, and set up the ath_common structure for attach purposes. This will become important once we start using the ath_common for read/write ops. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08atheros/ath9k: add common read/write ops and port ath9k to use itLuis R. Rodriguez1-0/+6
In an effort to make hw code driver core agnostic read and write operations are defined on the ath_common structure. This patch adds that and makes ath9k use it. This allows drivers like ath9k_htc to define its own read/write ops and still rely on the same hw code. This also paves the way for sharing code between ath9k/ath5k/ath9k_htc. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08atheros/ath9k: move macaddr, curaid, curbssid and bssidmask to commonLuis R. Rodriguez1-0/+4
These are common amongst ath9k and ath5k, so put them into the common structure and make ath9k to use it. ar9170 can use macaddr, and curbssid. We'll change ath5k and ar9170 separately. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08atheros: use get_unaligned_le*() for bssid mask settingLuis R. Rodriguez1-0/+1
Historically some macro helpers have been users for this, AR5K_LOW_ID() and AR5K_HIGH_ID(), use upstream unaligned helpers instead. This applid to ath5k and ar9170. ath9k already uses this. Worth noting is ath5k uses an ah_sta_id but that is already the MAC address combined with the associaiton ID, ah_sta_id is really ETH_ALEN in size. Cc: Bob Copeland <me@bobcopeland.com> Cc: Nick Kossifidis <mick@madwifi-project.org> Cc: Christian Lamparter <chunkeey@web.de> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08ath: move ath_bcast_mac to common headerLuis R. Rodriguez1-0/+2
This is used by both ath5k and ath9k to set the first bssid mask. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath: move regulatory info into shared common structureLuis R. Rodriguez1-0/+18
This moves the shared regulatory structure into the common structure. We will use this ongoing for common data. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath: add common ath_rxbuf_alloc() and make ath9k use itLuis R. Rodriguez1-0/+30
Turns out ath5k and ath9k can share the same helper to allocates RX skbs. We allocate skbs aligned to the cache line size. This requirement seems to have come from AR5210; when this was not done it seems sometimes we'd get bogus data. I'm also told it may have been a performance enhancement consideration. In the end I can't be sure we can remove this on new hardware so just keep this and start sharing it through ath.ko. Make ath9k start using this, ath5k is next. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-05 08:27:13 +0300