summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/ar9002_mac.c
AgeCommit message (Collapse)AuthorFilesLines
2022-12-22wifi: ath9k: remove most hidden macro dependencies on ahWenli Looi1-7/+7
Adds an explicit _ah parameter to most macros that previously had a hidden dependency on ah. This makes the code more compliant with the style guide. This change does not appear to affect the final binary. Signed-off-by: Wenli Looi <wlooi@ucalgary.ca> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/c8369317-cf84-f0e3-fe8-9b6e22e43a6a@ucalgary.ca
2022-03-25ath9k: split set11nRateFlags and set11nChainSelWenli Looi1-4/+5
This makes the code clearer since set11nRateFlags currently sets both the rate flags and chain sel. This may also be required for QCN550x support, where the rate flags and chain sel are in separate fields. This change does not appear to affect the final binary. Signed-off-by: Wenli Looi <wlooi@ucalgary.ca> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220320233010.123106-3-wlooi@ucalgary.ca
2021-11-19ath9k: fix intr_txqs settingPeter Seiderer1-1/+1
The struct ath_hw member intr_txqs is never reset/assigned outside of ath9k_hw_init_queues() and with the used bitwise-or in the interrupt handling ar9002_hw_get_isr() accumulates all ever set interrupt flags. Fix this by using a pure assign instead of bitwise-or for the first line (note: intr_txqs is only evaluated in case ATH9K_INT_TX bit is set). Signed-off-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211116220720.30145-1-ps.report@gmx.net
2020-08-14ath9k: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200727193520.GA832@embeddedor
2017-01-12ath9k: ar9002_mac: kill off ACCESS_ONCE()Mark Rutland1-32/+32
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some new features (e.g. KTSAN / Kernel Thread Sanitizer), it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, for some files (including the ath9k ar9002 mac driver), this mangles the formatting. As a preparatory step, this patch converts the driver to use {READ,WRITE}_ONCE() without said mangling. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: ath9k-devel@qca.qualcomm.com Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Cc: ath9k-devel@lists.ath9k.org Cc: netdev@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-25ath9k: add TPC capability to TX descriptor pathLorenzo Bianconi1-4/+4
Add TPC capability to TX descriptor path. Cap per-packet TX power according to TX power per-rate tables. Currently TPC is supported just by AR9003 based chips Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30ath9k: fix getting tx duration for dynackFelix Fietkau1-7/+19
On AR9003, tx control and tx status are in separate descriptor rings. Tx duration is extracted from the tx control descriptor data, which ar9003_hw_proc_txdesc cannot access. Fix getting the duration by adding a separate callback for it. Acked-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-17ath9k: add duration field to ath_tx_statusLorenzo Bianconi1-0/+7
Add duration field to ath_tx_status in order to report frame duration for each entry in multi-retry chain. These fields will be used in ACK timeout estimation algorithm (dynack) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18ath9k: set up tx power into the MRRLorenzo Bianconi1-1/+5
Set up tx power for each MRR segment in the tx descriptor Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-07Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-9/+43
Conflicts: drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c net/ipv6/ip6_tunnel.c net/ipv6/ip6_vti.c ipv6 tunnel statistic bug fixes conflicting with consolidation into generic sw per-cpu net stats. qlogic conflict between queue counting bug fix and the addition of multiple MAC address support. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19ath9k: move ath9k_debug_sync_cause out of ath9k_hwFelix Fietkau1-2/+4
ath9k_hw should not depend on any ath9k data structures like ath_softc Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-17ath9k: Fix interrupt handling for the AR9002 familySujith Manoharan1-9/+43
This patch adds a driver workaround for a HW issue. A race condition in the HW results in missing interrupts, which can be avoided by a read/write with the ISR register. All chips in the AR9002 series are affected by this bug - AR9003 and above do not have this problem. Cc: stable@vger.kernel.org Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: Gather and report IRQ sync_cause errors.Ben Greear1-0/+1
Report all defined sync_cause errors in debugfs to aid with debugging. Use a macro to print out the interrupts file contents to decrease code duplication. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k_hw: clean up ath9k_hw_setuprxdescFelix Fietkau1-4/+1
The ATH9K_HW_CAP_AUTOSLEEP check is bogus, the rx status area needs to be cleared on all non-EDMA PCI/AHB based chipsets anyway. Limit the memset to the rx status area to improve performance. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19ath: Convert ath_dbg(bar, ATH_DBG_<FOO>, to ath_dbg(bar, FOOJoe Perches1-5/+5
Add ATH_DBG_ to macros to shorten the uses and reduce the line count. Coalesce ath_dbg formats. Add missing spaces to coalesced formats. Add missing newline terminations to ath_dbg formats. Align ath_dbg arguments where appropriate. Standardize ath_dbg formats without periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-01drivers/net: Add export.h to files using EXPORT_SYMBOL/THIS_MODULEPaul Gortmaker1-0/+1
These were getting the macros from an implicit module.h include via device.h, but we are planning to clean that up. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> drivers/net: Add export.h to wireless/brcm80211/brcmfmac/bcmsdh.c This relatively recently added file uses EXPORT_SYMBOL and hence needs export.h included so that it is compatible with the module.h split up work. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17ath9k_hw: remove the old tx descriptor APIFelix Fietkau1-176/+0
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-17ath9k_hw: add a new API for setting tx descriptorsFelix Fietkau1-0/+101
Instead of using lots of different functions with long argument lists, pull all the necessary information from one struct. This makes the code easier to read and eliminates the need for copying data between multiple linked descriptors. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-30ath9k: use u8 for the tx key indexFelix Fietkau1-1/+1
This saves some space in struct ath_frame_info Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01ath9k_hw: remove ath9k_hw_get_desc_linkFelix Fietkau1-6/+0
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: Drag the driver to the year 2011Sujith Manoharan1-1/+1
The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05ath9k_hw: remove aggregation protection modeMohammed Shafi Shajakhan1-10/+0
when aggregation protection mode is enabled the hardware needs to send RTS/CTS for each HT frame. Currently its disabled so remove the unused call backs. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-19ath9k: fix powersave frame filtering/buffering in AP modeFelix Fietkau1-1/+11
This patch fixes a long standing issue of pending packets in the queue being sent (and retransmitted many times) to sleeping stations. This was made worse by aggregation through driver-internal retransmitting of A-MDPU subframes. Previously the hardware tx filter was cleared unconditionally for every single packet - with this patch it uses the IEEE80211_TX_CTL_CLEAR_PS_FILT for unaggregated frames. A sta_notify driver op is added to stop aggregation for stations when they enter powersave mode. Subframes stay buffered inside the driver, to ensure that the BlockAck window keeps a sane state. Since the driver uses software aggregation, the clearing of the tx filter needs to be handled by the driver instead of mac80211 for aggregated frames. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05ath9k: remove set11n_virtualmorefragMohammed Shafi Shajakhan1-12/+0
This does not seems to be used anywhere so remove it. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13ath9k_hw: remove ah->txpower_indexoffsetFelix Fietkau1-1/+0
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-08ath: Convert ath_print to ath_dbgJoe Perches1-10/+10
Remove ath/debug.h and the includes of these files. Coalesce long formats. Correct a few misspellings and missing "\n"s from these logging messages. Remove unnecessary trailing space before a newline. Remove ARRAY_SIZE casts, use printf type %zu Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15ath9k_hw: fix potential spurious tx error bit interpretationFelix Fietkau1-7/+9
According to documentation, AR_ExcessiveRetries, AR_Filtered and AR_FIFOUnderrun are only valid if AR_FrmXmitOK is clear. Not checking this might result in suboptimal FIFO settings, unnecessary retransmissions, or other connectivity issues. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-10ath9k_hw: optimize tx status descriptor processingFelix Fietkau1-45/+36
Disassembly shows, that at least on MIPS, the compiler generates a lot of memory accesses to the same location in the descriptor field parsing. Since it is operating on uncached memory, this can be quite expensive in this hot path. Change the code a bit to help the compiler optimize it properly, and get rid of some unused fields in the ath_tx_status struct. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-10ath9k_hw: small optimization in ar9002_hw_get_isrFelix Fietkau1-21/+11
ah->config.rx_intr_mitigation does not need to be checked before checking the rx interrupt mask for AR_ISR_RXMINTR or AR_ISR_RXINTM, as those interrupts will be masked out if rx interrupt mitigation is disabled. Avoid reading AR_ISR_S5_S twice by reordering the code to be more concise. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-13ath9k_hw: report the TID in the tx status on AR5008-AR9002Felix Fietkau1-0/+1
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: move AR9002 mac ops to its own fileLuis R. Rodriguez1-0/+480
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-18 00:03:26 +0300