summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/libertas/dev.h
AgeCommit message (Collapse)AuthorFilesLines
2015-11-18libertas: move under marvell vendor directoryKalle Valo1-211/+0
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2012-07-17libertas: Update 11d info only when interface is activeDaniel Drake1-0/+1
reg_notifier can be called before the interface is up. Handle this correctly by storing the requested country code, then apply the relevant configuration when the interface is brought up. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06cfg80211: clarify set_channel APIsJohannes Berg1-0/+1
Now that we've removed all uses of the set_channel API except for the monitor channel and in libertas, clarify this. Split the libertas mesh use into a new libertas_set_mesh_channel() operation, just to keep backward compatibility, and rename the normal set_channel() to set_monitor_channel(). Also describe the desired set_monitor_channel() semantics more clearly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17libertas: add asynchronous firmware loading capabilityDaniel Drake1-0/+10
As described at http://article.gmane.org/gmane.linux.kernel.wireless.general/86084 libertas is taking a long time to load because it loads firmware during module loading. Add a new API for interface drivers to load their firmware asynchronously. The same semantics of the firmware table are followed like before. Interface drivers will be converted in follow-up patches, then we can remove the old, synchronous firmware loading function. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03libertas: detect TX lockups and reset hardwareDaniel Drake1-0/+1
Recent patches added support for resetting the SD8686 hardware when commands time out, which seems to happen quite frequently soon after resuming the system from a Wake-on-WLAN-triggered resume. At http://dev.laptop.org/ticket/10969 we see the same thing happen with transmits. In this case, the hardware will fail to respond to a frame passed for transmission, and libertas (correctly) will block all further commands and transmissions as the hardware can only deal with one thing at a time. This results in a lockup while the system waits indefinitely for the dead card to respond. Hook up a TX lockup timer to detect this and reset the hardware. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27libertas: scan behaviour consistency improvementsDaniel Drake1-1/+0
When scanning for the broadcast SSID, there is no need to add the SSID TLV (restoring the behaviour of the driver behaviour in the wext days, confirmed in Marvell specifications). If bssid is unspecified, the current scan code will usually fire off an active scan probing for the specific requested SSID. However, if a scan is ongoing (or has just finished), those scan results will be used instead (even if that scan is totally different, e.g. a passive scan on channel 4 for a different SSID). Fix this inconsistency by always firing off a scan when associating without a bssid. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24libertas: handle mesh networks in lbs_iface_active()Dan Carpenter1-2/+2
There was an extra semicolon so the if condition wasn't used. We checked "priv->dev" twice instead of "priv->mesh_dev". Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09libertas: disable functionality when interface is downDaniel Drake1-1/+15
Modify the driver so that it does not function when the interface is down, in preparation for runtime power management. No commands can be run while the interface is down, so the ndo_dev_stop routine now directly does all necessary work (including asking the device to disconnect from the network and disabling multicast functionality) directly. power_save and power_restore hooks are added meaning that card drivers can take steps to turn the device off when the interface is down. The MAC address can now only be changed when all interfaces are down; the new address will be programmed when an interface gets brought up. This matches mac80211 behaviour. Also, some small cleanups/simplifications were made in the surrounding device handling logic. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08libertas: link mesh device to wiphyDaniel Drake1-1/+11
The mesh device is now exposed as an interface of the wiphy. This exposes the mesh device to the cfg80211 interface, allowing mesh channel selection to be reimplemented, and available to NetworkManager as it was before. Some header tweaking was needed in order to implement lbs_mesh_activated(). Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20libertas: only enable mesh when interface is activeDaniel Drake1-2/+0
Previously, the mesh was running whenever the appropriate hardware and firmware was present. Now we only run the mesh when the interface is running. Also simplifies interface management a little. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28libertas: use kernel-doc notation, fix comment styleRandy Dunlap1-10/+10
Convert all libertas/ files to use kernel-doc notation instead of whatever it was (doxygen?). Add or fix function parameters in several places. Use expected style for multi-line comments in lots of places. Remove erroneous /** in multiple places. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04libertas: Prepare stuff for if_spi.c pm supportVasily Khoruzhick1-0/+2
To support suspend/resume in if_spi we need two things: - re-setup fw in lbs_resume(), because if_spi powercycles card; - don't touch hwaddr on second lbs_update_hw_spec() call for same reason; Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-25Merge branch 'master' of ↵John W. Linville1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-11-17libertas: EHS_REMOVE_WAKEUP is not always supportedDeepak Saxena1-0/+1
Certain firmware versions, particularly the 8388 found on the XO-1, do not support the EHS_REMOVE_WAKEUP command that is used to disable WOL. Sending this command to the card will return a failure that would get propagated up the stack and cause suspend to fail. Instead, fall back to an all-zero wakeup mask. This fixes http://dev.laptop.org/ticket/9967 Signed-off-by: Deepak Saxena <dsaxena@laptop.org> Signed-off-by: Daniel Drake <dsd@laptop.org> [includes fixups by Paul Fox] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09libertas: terminate scan when stopping interfaceDaniel Drake1-0/+1
There are currently no provisions in place to ensure that the scanning task has been stopped when the interface is stopped or removed. This can result in a WARNING at net/wireless/core.c:643 and other badness when you remove the module while a scan is happening. Terminate the scanning task during interface stop. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-06libertas: scan before assocation if no BSSID was givenDan Williams1-0/+5
Fix this leftover TODO from the cfg80211 conversion by doing a scan if cfg80211 didn't pass in the BSSID for us. Since the scan code uses so much of the cfg80211_scan_request structure to build up the firmware command, we just fake one when the scan request is triggered internally. But we need to make sure that internal 'fake' cfg82011 scan request does not get back to cfg82011 via cfg80211_scan_done(). Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: remove unused cmd_pending waitqDan Williams1-1/+0
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: kill unused lbs_prepare_and_send_command()Dan Williams1-1/+0
Remove last bits of indirect command code. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert register access to direct commandsDan Williams1-1/+0
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert 11D_DOMAIN_INFO to a direct commandDan Williams1-3/+0
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-23Libertas: Added 11d support using cfg80211Kiran Divekar1-0/+3
Added 11d support for libertas driver using cfg80211. This is based on Holger Shurig's initial work to add cfg80211 support libertas. (https://patchwork.kernel.org/patch/64286/) Please let us know, if there are any improvements comments. Code is added to send 11d enable command to firmware while initialisation and pass 11d specific information to firmware when notifier handler is called by cfg80211. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-23Libertas: cfg80211 supportKiran Divekar1-50/+9
Holger Schurig's patch (https://patchwork.kernel.org/patch/64286/) is rebased to latest wireless-testing tree. (Includes patches from me originally posted as "libertas: fix build error due to undefined symbol" and "libertas: unmangle capability value". -- JWL) Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Tested-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03libertas: Added callback functions to support SDIO suspend/resume.Amitkumar Karwar1-0/+6
In suspend() host sleep is activated using already configured host sleep parameters through wol command, and in resume() host sleep is cancelled. Earlier priv->fw_ready flag used to reset and set in suspend and resume handler respectively. Since after suspend only host goes into sleep state and firmware is always ready, those changes in flag state are removed. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07Merge branch 'master' of ↵David S. Miller1-0/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bonding/bond_main.c drivers/net/via-velocity.c drivers/net/wireless/iwlwifi/iwl-agn.c
2010-03-30net/wireless/libertas: do not call wiphy_unregister() w/o wiphy_register()Daniel Mack1-0/+1
The libertas driver calls wiphy_unregister() without a prior wiphy_register() when a devices fails initialization. Fix this by introducing a private flag. [ 9.310000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [...] [ 9.330000] [<c0311310>] (wiphy_unregister+0xfc/0x19c) from [<bf00c9ec>] (lbs_cfg_free+0x70/0x9c [libertas]) [ 9.330000] [<bf00c9ec>] (lbs_cfg_free+0x70/0x9c [libertas]) from [<bf014fdc>] (lbs_remove_card+0x180/0x210 [libertas]) [ 9.330000] [<bf014fdc>] (lbs_remove_card+0x180/0x210 [libertas]) from [<bf035394>] (if_sdio_probe+0xdc4/0xef4 [libertas_sdio]) [ 9.330000] [<bf035394>] (if_sdio_probe+0xdc4/0xef4 [libertas_sdio]) from [<c0230d14>] (sdio_bus_probe+0xd4/0xf0) [ 9.330000] [<c0230d14>] (sdio_bus_probe+0xd4/0xf0) from [<c01a6034>] (driver_probe_device+0xa4/0x174) [ 9.330000] [<c01a6034>] (driver_probe_device+0xa4/0x174) from [<c01a6164>] (__driver_attach+0x60/0x84) [ 9.330000] [<c01a6164>] (__driver_attach+0x60/0x84) from [<c01a5854>] (bus_for_each_dev+0x4c/0x8c) [ 9.330000] [<c01a5854>] (bus_for_each_dev+0x4c/0x8c) from [<c01a50e4>] (bus_add_driver+0xa0/0x228) [ 9.330000] [<c01a50e4>] (bus_add_driver+0xa0/0x228) from [<c01a6470>] (driver_register+0xc0/0x150) [ 9.330000] [<c01a6470>] (driver_register+0xc0/0x150) from [<bf03a06c>] (if_sdio_init_module+0x6c/0x108 [libertas_sdio]) [ 9.330000] [<bf03a06c>] (if_sdio_init_module+0x6c/0x108 [libertas_sdio]) from [<c00263ac>] (do_one_initcall+0x5c/0x1bc) [ 9.330000] [<c00263ac>] (do_one_initcall+0x5c/0x1bc) from [<c0069f80>] (sys_init_module+0xc0/0x1f0) [ 9.330000] [<c0069f80>] (sys_init_module+0xc0/0x1f0) from [<c0026f00>] (ret_fast_syscall+0x0/0x30) Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Dan Williams <dcbw@redhat.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Bing Zhao <bzhao@marvell.com> Cc: libertas-dev@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-24libertas: add auto auth mode featureAmitkumar Karwar1-0/+1
Auto auth mode is enabled by default. If user doesn't specify the auth mode, while association driver will first try with open mode and then with shared key mode. If user specifies an auth mode, auto auth is disabled and driver will not try association with another auth mode. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-15Merge branch 'master' of ↵David S. Miller1-1/+0
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-02-09libertas: don't retry commandsHolger Schurig1-1/+0
Retrying commands seldomly works, most often the firmware is in a weird state anyway and needs the device to reset. So it's better to report the broken state back to user-space. Also rename command_timer_fn() into lbs_cmd_timeout_handler(), which better reflect it's usage. Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-26Merge branch 'master' of ↵David S. Miller1-5/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-12-23kfifo: move struct kfifo in placeStefani Seibold1-2/+2
This is a new generic kernel FIFO implementation. The current kernel fifo API is not very widely used, because it has to many constrains. Only 17 files in the current 2.6.31-rc5 used it. FIFO's are like list's a very basic thing and a kfifo API which handles the most use case would save a lot of development time and memory resources. I think this are the reasons why kfifo is not in use: - The API is to simple, important functions are missing - A fifo can be only allocated dynamically - There is a requirement of a spinlock whether you need it or not - There is no support for data records inside a fifo So I decided to extend the kfifo in a more generic way without blowing up the API to much. The new API has the following benefits: - Generic usage: For kernel internal use and/or device driver. - Provide an API for the most use case. - Slim API: The whole API provides 25 functions. - Linux style habit. - DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros - Direct copy_to_user from the fifo and copy_from_user into the fifo. - The kfifo itself is an in place member of the using data structure, this save an indirection access and does not waste the kernel allocator. - Lockless access: if only one reader and one writer is active on the fifo, which is the common use case, no additional locking is necessary. - Remove spinlock - give the user the freedom of choice what kind of locking to use if one is required. - Ability to handle records. Three type of records are supported: - Variable length records between 0-255 bytes, with a record size field of 1 bytes. - Variable length records between 0-65535 bytes, with a record size field of 2 bytes. - Fixed size records, which no record size field. - Preserve memory resource. - Performance! - Easy to use! This patch: Since most users want to have the kfifo as part of another object, reorganize the code to allow including struct kfifo in another data structure. This requires changing the kfifo_alloc and kfifo_init prototypes so that we pass an existing kfifo pointer into them. This patch changes the implementation and all existing users. [akpm@linux-foundation.org: fix warning] Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22libertas: remove priv->ratebitmapHolger Schurig1-1/+0
Used to be a write-only-variable :-) Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-22libertas: remove priv->capabilityHolger Schurig1-1/+0
This variable was once set to WLAN_CAPABILITY_SHORT_PREAMBLE and there's no code that could change the variable to something else. Therefore it seems this is not necessary :-) Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-22libertas: make mesh configurableHolger Schurig1-0/+2
Mostly for the embedded people that know beforehand that they don't need MESH at all and want to save some bytes, but also helpful for the upcoming cfg80211 transition. text data bss dec hex filename 114264 2308 140 116712 1c7e8 libertas.ko with mesh 105026 2000 140 107166 1a29e libertas.ko without mesh -------------------------------------------------- -9238 -308 -9546 Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-22libertas: remove mesh_autostart_enabled and sync_channelHolger Schurig1-2/+0
mesh_autostart_enabled was nowhere set. Rumor is that this is used in the OLPC tree, but they never did submit their code upstream. After removing this code, it turned out that the sync_channel stuff is now also unused, so get rid of that as well. Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-22libertas: use priv->mesh_tlv instead of priv->mesh_fw_verHolger Schurig1-1/+0
Both variables contained the same information (no mesh, old mesh, new mesh). So we can get rid of one variable. Also move the mesh-version test from cmd.c into mesh.c. Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28libertas: introduce mesh.hHolger Schurig1-11/+1
Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: get current channel out of priv->curbssparamsHolger Schurig1-0/+1
... as priv->curbssparams won't exist once libertas+cfg80211 lands. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: sort variables in struct lbs_privateHolger Schurig1-153/+104
Having the variables in logical groups allows us to easier #ifdef stuff out. No functional change. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: move scan/assoc related stuffHolger Schurig1-153/+2
Another cfg80211-preparation patch: removes some code/definitions from main.c and dev.h and put's it into assoc.c/.h, scan.c/.h. No function change. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: change IW_ESSID_MAX_SIZE -> IEEE80211_MAX_SSID_LENHolger Schurig1-5/+5
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: remove unused 11d.h as well, priv->countryinfoHolger Schurig1-2/+0
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: remove unused 11d codeHolger Schurig1-9/+0
Most of the 11d code was protected with an "if (priv->enable11d)" clause. But there was no code that anywhere that was able to set this variable to true. So all 11d code was dead for almost a year and no one complained. That's enought incentive to remove this code. Besides removing old cruft, we gain back the 11d capability in a common way when we merge the cfg80211 functionality. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: cleanup host.h and hostcmd.hHolger Schurig1-1/+1
Also remove some unused definitions and make tab usage consistent. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08libertas: first stab at cfg80211 supportHolger Schurig1-0/+1
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08libertas: Add auto deep sleep support for SD8385/SD8686/SD8688Amitkumar Karwar1-0/+18
Add timer based auto deep sleep feature in libertas driver which can be configured using iwconfig command. This is tested on SD8688, SD8686 cards with firmware versions 10.38.1.p25, 9.70.4.p0 respectively on 32-bit and 64-bit platforms. Tests have been done for USB/CS cards to make sure that the patch won't break USB/CS code. We didn't test the if_spi driver. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-02netdev: drivers should make ethtool_ops constStephen Hemminger1-1/+1
No need to put ethtool_ops in data, they should be const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-10libertas: remove ps_supported flag, use fwcapinfoAndrey Yurovsky1-1/+0
Power save support depends on the firmware capabilities rather than the card's hardware interface. Use the FW_CAPINFO_PS bit in the firmware capabilities mask throughout the driver in place of the redundant ps_supported flag and don't make decisions about PS support in the interface drivers (with the exception of a special case in the USB driver). V2: put the USB special case in the right place. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03libertas: improve function init/shutdown handling for SD8688Bing Zhao1-2/+0
This patch is to incorporate Dan Williams' comments for commit: "libertas: implement function init/shutdown commands for SD8688" 1. remove fn_init_required and fn_shutdown_required variables from lbs_private structure. If required, __lbs_cmd() will be called directly to send function init/shutdown command for SD8688 in if_sdio_probe() or if_sdio_remove() callback. 2. add global variable "user_rmmod" to distinguish between the module removal case and the card removal case. This flag will be checked in if_sdio_remove() against SD8688 card to determine whether or not the function shutdown command needs to be sent. 3. remove "card" from if_sdio_model structure as it cannot store card pointers for multiple cards. Besides, it's no longer needed to store the "card" pointer with changes #1 & #2 above. Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03libertas: restyle Marvell & IEEE TLV structure namesDan Williams1-1/+1
Easier to read and more conformant with kernel style. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03libertas: simplify and clean up association/start/join setupDan Williams1-3/+3
Some of the parameters for association/join/start commands aren't used (like the FH and CF IEs for IBSS, and the FH IE for BSS), so get rid of their unions to reduce indirection. Also clean up structure names for kernel style. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-31 19:45:26 +0300