summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek
AgeCommit message (Collapse)AuthorFilesLines
2024-02-21wifi: mac80211: check beacon countdown is complete on per link basisAditya Kumar Singh1-2/+2
Currently, function to check if beacon countdown is complete uses deflink to fetch the beacon and check the counter. However, with MLO, there is a need to check the counter for the beacon in a particular link. Add support to use link_id in order to fetch the beacon from a particular link data. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240216144621.514385-2-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: add support to call csa_finish on a linkAditya Kumar Singh4-4/+4
Currently ieee80211_csa_finish() function finalizes CSA by scheduling a finalizing worker using the deflink. With MLO, there is a need to do it on a given link basis. Pass link ID of the link on which CSA needs to be finalized. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240130140918.1172387-6-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: introduce 'channel request'Johannes Berg1-2/+2
For channel contexts, mac80211 currently uses the cfg80211 chandef struct (control channel, center freq(s), width) to define towards drivers and internally how these behave. In fact, there are _two_ such structs used, where the min_def can reduce bandwidth according to the stations connected. Unfortunately, with EHT this is longer be sufficient, at least not for all hardware. EHT requires that non-AP STAs that are connected to an AP with a lower bandwidth than it (the AP) advertises (e.g. 160 MHz STA connected to 320 MHz AP) still be able to receive downlink OFDMA and respond to trigger frames for uplink OFDMA that specify the position and bandwidth for the non-AP STA relative to the channel the AP is using. Therefore, they need to be aware of this, and at least for some hardware (e.g. Intel) this awareness is in the hardware. As a result, use of the "same" channel may need to be split over two channel contexts where they differ by the AP being used. As a first step, introduce a concept of a channel request ('chanreq') for each interface, to control the context it requests. This step does nothing but reorganise the code, so that later the AP's chandef can be added to the request in order to handle the EHT case described above. Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: simplify non-chanctx driversJohannes Berg8-3/+32
There are still surprisingly many non-chanctx drivers, but in mac80211 that code is a bit awkward. Simplify this by having those drivers assign 'emulated' ops, so that the mac80211 code can be more unified between non-chanctx/chanctx drivers. This cuts the number of places caring about it by about 15, which are scattered across - now they're fewer and no longer in the channel context handling. Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-05wifi: mt76: mt7996: fix fortify warningFelix Fietkau1-1/+2
Copy cck and ofdm separately in order to avoid __read_overflow2_field warning. Fixes: f75e4779d215 ("wifi: mt76: mt7996: add txpower setting support") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240203132446.54790-1-nbd@nbd.name
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for mt76 driversBreno Leitao29-0/+29
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the MediaTek mt76 drivers. Here is a sorted list of descriptions. It might make the reviewing process easier. MODULE_DESCRIPTION("MediaTek MT7603E and MT76x8 wireless driver"); MODULE_DESCRIPTION("MediaTek MT7615E and MT7663E wireless driver"); MODULE_DESCRIPTION("MediaTek MT7615E MMIO helpers"); MODULE_DESCRIPTION("MediaTek MT7663 SDIO/USB helpers"); MODULE_DESCRIPTION("MediaTek MT7663S (SDIO) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7663U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x02 helpers"); MODULE_DESCRIPTION("MediaTek MT76x02 MCU helpers"); MODULE_DESCRIPTION("MediaTek MT76x0E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x0U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x2 EEPROM helpers"); MODULE_DESCRIPTION("MediaTek MT76x2E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x2U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x connac layer helpers"); MODULE_DESCRIPTION("MediaTek MT76x EEPROM helpers"); MODULE_DESCRIPTION("MediaTek MT76x helpers"); MODULE_DESCRIPTION("MediaTek MT76x SDIO helpers"); MODULE_DESCRIPTION("MediaTek MT76x USB helpers"); MODULE_DESCRIPTION("MediaTek MT7915E MMIO helpers"); MODULE_DESCRIPTION("MediaTek MT7921 core driver"); MODULE_DESCRIPTION("MediaTek MT7921E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7921S (SDIO) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7921U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7925 core driver"); MODULE_DESCRIPTION("MediaTek MT7925E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7925U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT792x core driver"); MODULE_DESCRIPTION("MediaTek MT792x USB helpers"); MODULE_DESCRIPTION("MediaTek MT7996 MMIO helpers"); Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-10-leitao@debian.org
2023-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni1-4/+6
Cross-merge networking fixes after downstream PR. Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c 23c93c3b6275 ("bnxt_en: do not map packet buffers twice") 6d1add95536b ("bnxt_en: Modify TX ring indexing logic.") tools/testing/selftests/net/Makefile 2258b666482d ("selftests: add vlan hw filter tests") a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19Merge tag 'wireless-next-2023-12-18' of ↵Jakub Kicinski57-745/+3268
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.8 The second features pull request for v6.8. A bigger one this time with changes both to stack and drivers. We have a new Wifi band RFI (WBRF) mitigation feature for which we pulled an immutable branch shared with other subsystems. And, as always, other new features and bug fixes all over. Major changes: cfg80211/mac80211 * AMD ACPI based Wifi band RFI (WBRF) mitigation feature * Basic Service Set (BSS) usage reporting * TID to link mapping support * mac80211 hardware flag to disallow puncturing iwlwifi * new debugfs file fw_dbg_clear mt76 * NVMEM EEPROM improvements * mt7996 Extremely High Throughpu (EHT) improvements * mt7996 Wireless Ethernet Dispatcher (WED) support * mt7996 36-bit DMA support ath12k * support one MSI vector * WCN7850: support AP mode * tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits) wifi: mt76: mt7996: Use DECLARE_FLEX_ARRAY() and fix -Warray-bounds warnings wifi: ath11k: workaround too long expansion sparse warnings Revert "wifi: ath12k: use ATH12K_PCI_IRQ_DP_OFFSET for DP IRQ" wifi: rt2x00: remove useless code in rt2x00queue_create_tx_descriptor() wifi: rtw89: only reset BB/RF for existing WiFi 6 chips while starting up wifi: rtw89: add DBCC H2C to notify firmware the status wifi: rtw89: mac: add suffix _ax to MAC functions wifi: rtw89: mac: add flags to check if CMAC and DMAC are enabled wifi: rtw89: 8922a: add power on/off functions wifi: rtw89: add XTAL SI for WiFi 7 chips wifi: rtw89: phy: print out RFK log with formatted string wifi: rtw89: parse and print out RFK log from C2H events wifi: rtw89: add C2H event handlers of RFK log and report wifi: rtw89: load RFK log format string from firmware file wifi: rtw89: fw: add version field to BB MCU firmware element wifi: rtw89: fw: load TX power track tables from fw_element wifi: mwifiex: configure BSSID consistently when starting AP wifi: mwifiex: add extra delay for firmware ready wifi: mac80211: sta_info.c: fix sentence grammar wifi: mac80211: rx.c: fix sentence grammar ... ==================== Link: https://lore.kernel.org/r/20231218163900.C031DC433C9@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-17wifi: mt76: mt7996: Use DECLARE_FLEX_ARRAY() and fix -Warray-bounds warningsGustavo A. R. Silva1-5/+5
Transform zero-length arrays `rate`, `adm_stat` and `msdu_cnt` into proper flexible-array members in anonymous union in `struct mt7996_mcu_all_sta_info_event` via the DECLARE_FLEX_ARRAY() helper; and fix multiple -Warray-bounds warnings: drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:544:61: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:551:58: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:553:58: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:530:61: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:538:66: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:540:66: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:520:57: warning: array subscript <unknown> is outside array bounds of 'struct all_sta_trx_rate[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:526:76: warning: array subscript <unknown> is outside array bounds of 'struct all_sta_trx_rate[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:526:76: warning: array subscript <unknown> is outside array bounds of 'struct all_sta_trx_rate[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:526:76: warning: array subscript <unknown> is outside array bounds of 'struct all_sta_trx_rate[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:526:76: warning: array subscript <unknown> is outside array bounds of 'struct all_sta_trx_rate[0]' [-Warray-bounds=] This results in no differences in binary output, helps with the ongoing efforts to globally enable -Warray-bounds. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/ZXiU9ayVCslt3qiI@work
2023-12-12wifi: mt76: fix crash with WED rx support enabledFelix Fietkau1-4/+6
If WED rx is enabled, rx buffers are added to a buffer pool that can be filled from multiple page pools. Because buffers freed from rx poll are not guaranteed to belong to the processed queue's page pool, lockless caching must not be used in this case. Cc: stable@vger.kernel.org Fixes: 2f5c3c77fc9b ("wifi: mt76: switch to page_pool allocator") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231208075004.69843-1-nbd@nbd.name
2023-12-11wifi: mt76: mt7921: fix wrong 6Ghz power typeMing Yen Hsieh1-3/+35
To avoid using incorrect 6g power settings after disconnection, it should to update back to the default state when disconnected. Fixes: 51ba0e3a15eb ("wifi: mt76: mt7921: add 6GHz power type support for clc") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-11wifi: mt76: mt7921: fix CLC command timeout when suspend/resumeMing Yen Hsieh3-5/+22
When enter suspend/resume while in a connected state, the upper layer will trigger disconnection before entering suspend, and at the same time, it will trigger regd_notifier() and update CLC, causing the CLC event to not be received due to suspend, resulting in a command timeout. Therefore, the update of CLC is postponed until resume, to ensure data consistency and avoid the occurrence of command timeout. Fixes: 4fc8df50fd41 ("wifi: mt76: mt7921: get regulatory information from the clc event") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-11wifi: mt76: mt7921: fix country count limitation for CLCMing Yen Hsieh1-3/+8
Due to the increase in the number of power tables for 6Ghz on CLC, the variable nr_country is no longer sufficient to represent the total quantity. Therefore, we have switched to calculating the length of clc buf to obtain the correct power table. Additionally, the version number has been incremented to 1. Fixes: 23bdc5d8cadf ("wifi: mt76: mt7921: introduce Country Location Control support") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-11wifi: mt76: mt7921: reduce the size of MCU firmware download Rx queueSean Wang2-2/+3
We actually don't need the reserve the 512 entries for the MCU firmware download Rx queue because the queue was only used in the firmware download phase to save the most of space and the reduction can significantly help with reducing latency we spent by ~20% further in resetting the Rx queue as the device was waking up from deep sleep mode. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-11wifi: mt76: mt7996: set DMA mask to 36 bits for boards with more than 4GB of RAMSujuan Chen10-19/+43
Introduce the capability to run mt7996 driver on boards with more than 4GB of memory. Co-developed-by: Rex Lu <rex.lu@mediatek.com> Signed-off-by: Rex Lu <rex.lu@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7921s: fix workqueue problem causes STA association failWang Zhao5-12/+18
The ieee80211_queue_work function queues work into the mac80211 local->workqueue, which is widely used for mac80211 internal work processes. In the mt76 driver, both the mt76-sido-status and mt76-sdio-net threads enqueue workers to the workqueue with this function. However, in some cases, when two workers are enqueued to the workqueue almost simultaneously, the second worker may not be scheduled immediately and may get stuck for a while. This can cause timing issues. To avoid these timing conflicts caused by worker scheduling, replace the worker with an independent thread. Fixes: 48fab5bbef40 ("mt76: mt7921: introduce mt7921s support") Signed-off-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: Convert to platform remove callback returning voidUwe Kleine-König3-13/+6
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert the three mt76 drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7925: remove iftype from mt7925_init_eht_caps signatureLorenzo Bianconi1-3/+2
Get rid of nl80211_iftype from mt7925_init_eht_caps routine signature since it is not actually used. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add PCI IDs for mt7992StanleyYP Wang1-2/+6
Add PCI device IDs to enable mt7992 chipsets support. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: add new definition of tx descriptorBenjamin Lin2-2/+6
Add MT_TXD6_MSDU_CNT_V2 bitfield, which is used by mt7992 chipsets. This is a preliminary patch for mt7992 chipsets support. Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: adjust interface num and wtbl size for mt7992StanleyYP Wang2-4/+7
MT7992 chipsets support up to 32 interfaces (with maximum 19 per-band) and 512 station entries. This is a preliminary patch for mt7992 chipsets support. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: support mt7992 eeprom loadingStanleyYP Wang2-3/+12
Add the default eeprom and 0x7992 check to mt7996_check_eeprom(). This is a preliminary patch for mt7992 chipsets support. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: rework register offsets for mt7992StanleyYP Wang2-23/+112
Add mt7992_offs to differentiate registers that share the same definitions with mt7996 chipsets but have differnet offsets. This is a preliminary patch for mt7992 chipsets support. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add DMA support for mt7992Benjamin Lin4-17/+61
Add DMA TX/RX queues and RRO init flow for mt7992 chipsets. This is a preliminary patch for mt7992 chipsets support. Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: add firmware support for mt7992StanleyYP Wang7-5/+45
Support firmware download and enable related AFE PLL for mt7992 chipsets. This is a preliminary patch for mt7992 chipsets support. Co-developed-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: introduce mt7996_band_valid()Shayne Chen5-32/+46
Replace dbdc_support and tbtc_support with mt7996_band_valid() to support mt7996 variants with band0/band2 dual-band support. This changes reduces ambiguity when checking supported bands on different variants or new chipsets, as well as during the init configurations on DMA TX/RX queues or irq masks. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: fix mt7996_mcu_all_sta_info_event struct packingArnd Bergmann1-3/+3
The internal struct and union inside mt7996_mcu_all_sta_info_event is marked as being aligned, which conflicts with it being unaligned within that structure: drivers/net/wireless/mediatek/mt76/mt7996/mcu.h:165:2: error: field within 'struct mt7996_mcu_all_sta_info_event' is less aligned than 'union mt7996_mcu_all_sta_info_event::(anonymous at ../drivers/net/wireless/mediatek/mt76/mt7996/mcu.h:165:2)' and is usually due to 'struct mt7996_mcu_all_sta_info_event' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] Mark all three as being packed as well to ensure byte packing for the entire thing. Fixes: adde3eed4a75 ("wifi: mt76: mt7996: Add mcu commands for getting sta tx statistic") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7915: also MT7981 is 3T3R but nss2 on 5 GHz bandStanleyYP Wang1-2/+3
Just like MT7916 also MT7981 can handle 3T3R DBDC frontend and should hence be included in the corresponding conditional expression in the driver. Add it. Fixes: 6bad146d162e ("wifi: mt76: mt7915: add support for MT7981") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7915: fix EEPROM offset of TSSI flag on MT7981StanleyYP Wang1-1/+2
The offset of the TSSI flag on the EEPROM of MT7981 devices was wrong. Set the correct offset instead. Fixes: 6bad146d162e ("wifi: mt76: mt7915: add support for MT7981") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: fix EHT phy mode checkMeiChia Chiu1-1/+1
Add a BSS eht_support check before returning EHT phy mode. Without this patch, there might be an inconsistency where the softmac layer thinks the BSS is in HE mode, while the FW thinks it is in EHT mode. Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: add beacon protection support for mt7996Allen Ye5-42/+153
Implement beacon protection feature for mt7996 chipsets, and also do some cleanup on the set key routine. Co-developed-by: Rudra Shahi <rudra.shahi@mediatek.com> Signed-off-by: Rudra Shahi <rudra.shahi@mediatek.com> Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: rework ampdu params settingPeter Chiu2-44/+16
Add sta_rec_ht_uni struct to pass HT ampdu params to firmware. For VHT, HE, and EHT mode, firmware will get the ampdu params by parsing the corresponding capability. Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: fix alignment of sta info eventStanleyYP Wang1-1/+1
Fix the alignment of struct mt7996_mcu_all_sta_info_event. Fixes: adde3eed4a75 ("wifi: mt76: mt7996: Add mcu commands for getting sta tx statistic") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: switch to mcu command for TX GI reportBenjamin Lin5-46/+74
During runtime, the GI value in the WTBL is not updated in real-time. To obtain the latest results for the TX GI, switch to use an MCU command. Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: use chainmask for power delta calculationAllen Ye3-3/+3
The power gain value is related to total TX path, so change the calculation to use per-phy chainmask. Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add txpower setting supportShayne Chen4-0/+85
Add support for setting txpower from upper layer and configuring per-rate txpower limit table. Co-developed-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Allen Ye <allen.ye@mediatek.com> Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: change txpower init to per-phyShayne Chen6-29/+47
Use per-phy structure for maximum txpower value initializing, since each phy may have a different chainmask, which can impact the calculation of power gain. Co-developed-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: fix rate usage of inband discovery framesMeiChia Chiu1-2/+2
For UBPR and FILS frames, the BSS_CHANGED_BEACON flag will also be set, which causes those frames to use the beacon rate in TX descriptors. Adjust the statement to fix this issue. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: align the format of fixed rate commandPeter Chiu2-8/+75
Use the new fixed rate command format to let the fixed field function work normally. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: handle IEEE80211_RC_SMPS_CHANGEDPeter Chiu3-4/+10
Make mt7996_mcu_set_fixed_field() non-static in order to handle IEEE80211_RC_SMPS_CHANGED in mt7996_mac_sta_rc_work(). Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: set fixed_bw bit in TX descriptor for fixed rate framesHoward Hsu2-2/+4
Always set the fixed_bw bitfield for fixed rate frames to keep it being sent with specific bandwidth. Without this change, the bw of fixed rate frames will still be decided by hardware. Reported-by: Chank Chen <chank.chen@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: adjust WFDMA settings to improve performancePeter Chiu2-21/+58
Refactor and update dma prefetch parts and also split band 1 traffic to PCIe 1 to enhance throughput. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: fix the size of struct bss_rate_tlvSujuan Chen1-1/+1
Align the format of struct bss_rate_tlv to the firmware. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: add beacon duplicate TX mode support for mt7996StanleyYP Wang7-25/+68
For connac3 chipsets, setting of spe_idx is moved from TX descriptor to the fixed rate table. This patch implements the setting to support duplicate TX mode for beacon. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add thermal sensor device supportHoward Hsu2-0/+130
This patch adds support for thermal sensor device, including the following features: - Support to read current chip temperature. - Support to set/get the trigger/restore temperature for thermal service. - Support to read current chip tx cycle. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: add thermal protection support for mt7996Howard Hsu6-0/+274
Implement thermal protection commands and support Linux cooling device control for mt7996 chipsets. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add TX statistics for EHT mode in debugfsHoward Hsu1-2/+3
Add EHT statistics of beamforming feedback and BW320 in debugfs tx_stats command. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add support for variants with auxiliary RX pathShayne Chen4-5/+35
Add support to correctly configure the rx chainmask of variants that have additional auxiliary RX path. e.g., 4T5R. The auxiliary RX path is transparent to driver, but driver needs to correctly configure it in the set channel fw command. Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7915: fallback to non-wed mode if platform_get_resource fails ↵Lorenzo Bianconi1-1/+1
in mt7915_mmio_wed_init() mt76 assumes mt7915_mmio_wed_init can fail just after wed driver has been attached running mtk_wed_device_attach(). Fall back to non-wed mode if platform_get_resource fails in mt7915_mmio_wed_init routines. Fixes: eebb70976be5 ("wifi: mt76: mt7915: enable wed for mt7986-wmac chipset") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add wed rro delete session garbage collectorLorenzo Bianconi8-0/+197
Introduce the capability to clear WED rro session configured in the hw according to the event reported by the MCU firmware Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-09 17:00:46 +0300